
                                  oddcomp 



Function

   Identify proteins with specified sequence word composition

Description

   oddcomp reads one or more protein sequences, identifies proteins
   containing regions with a specific sequence word composition, then
   writes a list of sequence identifiers of those proteins to an output
   file. The word composition is read from an input file which gives the
   minimum word occurence for any number of sequence words. For an input
   sequence to be listed in the output file, each word must be found at
   least the stated number of times in any window over the input
   sequence. The window size may be set to any value or the length of the
   current protein (-fullwindow option).

Algorithm

   The input file of sequence word composition data is in the same format
   as the output from compseq. Only one word size (of any length) can be
   used and is specified at the top of the file. The search for words is
   a boolean AND meaning all words given in the file must be found in a
   sequence for it to be reported.

   Each word must occur at least the stated number of times in a window
   over an input sequence for the sequence to be reported. The word size
   given in the input data file must be less than the specified window
   size; you will not get any hits otherwise.

Usage

   Here is a sample session with oddcomp

   To search for entries in swissprot with at least 1 SR AND at least 2
   RS:


% oddcomp 
Identify proteins with specified sequence word composition
Input protein sequence(s): tsw:*
Program compseq output file: oddcomp.comp
Window size to consider (e.g. 30 aa) [30]: 
Output file [edd1_rat.oddcomp]: out.odd

   Go to the input files for this example
   Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers (* if not always prompted):
  [-sequence]          seqall     Protein sequence(s) filename and optional
                                  format, or reference (input USA)
  [-infile]            infile     This is a file in the format of the output
                                  produced by 'compseq' that is used to set
                                  the minimum frequencies of words in this
                                  analysis.
*  -window             integer    [30] This is the size of window in which to
                                  count.
                                  Thus if you want to count frequencies in a
                                  40 aa stretch you should enter 40 here.
                                  (Integer 10 or more)
  [-outfile]           outfile    [*.oddcomp] This is the results file.

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers:
   -fullwindow         toggle     [N] Set this option on (Y) if you want the
                                  window size to be set to the length of the
                                  current protein. Otherwise, leave this
                                  option unset, in which case you'll be
                                  prompted for a window size to use.
   -[no]ignorebz       boolean    [Y] The amino acid code B represents
                                  Asparagine or Aspartic acid and the code Z
                                  represents Glutamine or Glutamic acid.
                                  These are not commonly used codes and you
                                  may wish not to count words containing them,
                                  just noting them in the count of 'Other'
                                  words.

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-outfile" associated qualifiers
   -odirectory3        string     Output directory

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages

Input file format

  Input files for usage example

   'tsw:*' is a sequence entry in the example protein database 'tsw'

  File: oddcomp.comp

# Example input file for oddcomp
Word size       2
Total count     0

#
# Word  Obs Count       Obs Frequency   Exp Frequency   Obs/Exp Frequency
#
RS      2               0               0               0
SR      1               0               0               0

Other   0               0               0               0

   The columns "Obs Frequency", "Exp Frequency" and "Obs/Exp Frequency"
   are not required - they were simply included in this example to show
   the similarity between this input file format and the output of the
   program compseq. A compseq output file can be used as the input to
   oddcomp - the extra columns are ignored by oddcomp.

   A minimal composition input data file would look like this:
     _________________________________________________________________

Word size       2
Total count     0
RS      2
SR      1
     _________________________________________________________________

   Blank lines and lines starting with '#' are ignored.

   The first non-comment line should start with 'Word size' and will
   specify the word size to use.

   A line starting with the word 'Total' is required.

   Anything after the line starting with the word 'Total' will be read as
   word count data.

   Word count data consists of a word to search for and the count of that
   word to search for within the sliding window. The columns are
   separated by one or more spaces or TAB characters. Anything after
   these two columns will be ignored.

Output file format

   oddcomp writes a list of sequence name identifiers.

  Output files for usage example

  File: out.odd

#
# Output from 'oddcomp'
#
# The Expected frequencies are taken from the file: ../../data/oddcomp.comp
#
#       Word size: 2
        CNR1B_FUGRU
        CO9_FUGRU
        FOS_FUGRU
        RS7_FUGRU

#       END     #

Data files

   None.

Notes

   oddcomp was originally written to identify proteins with SR/RS dimers,
   for example, windows of forty amino acids containing at least 3 SR and
   4 RS words. More generally, it will help answer questions of the type
   'which proteins contain at least x occurrences of word X and y
   occurences of word Y in regions of n residues'. For example, one could
   search for serine rich or polyglutamine rich, collagen helix, or
   similar proteins using this program.

   oddcomp does not report the location of the word matches in the
   sequence, merely the sequence ID. To search for a specific set of
   words in a sequence, you should edit the input file of sequence word
   composition data.

References

   None.

Warnings

   None.

Diagnostic Error Messages

   None.

Exit status

   It always exits with a status of 0.

Known bugs

   None.

See also

   Program name Description
   antigenic Finds antigenic sites in proteins
   digest Reports on protein proteolytic enzyme or reagent cleavage sites
   epestfind Finds PEST motifs as potential proteolytic cleavage sites
   fuzzpro Search for patterns in protein sequences
   fuzztran Search for patterns in protein sequences (translated)
   helixturnhelix Identify nucleic acid-binding motifs in protein
   sequences
   patmatdb Searches protein sequences with a sequence motif
   patmatmotifs Scan a protein sequence with motifs from the PROSITE
   database
   pepcoil Predicts coiled coil regions in protein sequences
   preg Regular expression search of protein sequence(s)
   pscan Scans protein sequence(s) with fingerprints from the PRINTS
   database
   sigcleave Reports on signal cleavage sites in a protein sequence

Author(s)

   David Martin (dmartin  rfcgr.mrc.ac.uk)

History

   Written (1999) - David Martin

Target users

   This program is intended to be used by everyone and everything, from
   naive users to embedded scripts.

Comments

   None
