Metadata-Version: 1.2
Name: xml2rfc
Version: 2.11.1
Summary: Xml2rfc generates RFCs and IETF drafts from document source in XML according to the dtd in RFC2629.
Home-page: https://tools.ietf.org/tools/xml2rfc/trac/
Author: Henrik Levkowetz, Josh Bothun
Author-email: tools-discuss@ietf.org
Maintainer: Henrik Levkowetz
Maintainer-email: henrik@levkowetz.com
License: Simplified BSD Licence
Download-URL: https://pypi.python.org/pypi/xml2rfc
Description: Introduction
        ============
        
        The IETF_ uses a specific format for the standards and other documents it
        publishes as RFCs_, and for the draft documents which are produced when
        developing documents for publications.  There exists a number of different
        tools to facilitate the formatting of drafts and RFCs according to the
        existing rules, and this tool, **xml2rfc**, is one of them.  It takes as input
        an xml file which contains the text and meta-information about author names
        etc., and transforms it into suitably formatted output.  The input xml file
        should follow the DTD given in RFC2629_ (or it's `inofficial successor`_).
        
        The current incarnation of **xml2rfc** provides output in the following
        formats: Paginated and unpaginated ascii text, html, nroff, and expanded xml.
        Only the paginated text format is currently (January 2013) accepable as draft
        submissions to the IETF.
        
        .. _IETF: https://www.ietf.org/
        .. _RFCs: https://www.rfc-editor.org/
        .. _RFC2629: https://tools.ietf.org/html/rfc2629
        .. _inofficial successor: https://tools.ietf.org/html/draft-mrose-writing-rfcs
        
        Installation
        ============
        
        System Install
        --------------
        
        To install a system-wide version of xml2rfc, download and unpack the `xml2rfc 
        distribution package`_, then cd into the resulting package directory and run::
        
            $ python setup.py install
        
        Alternatively, if you have the 'pip_' command ('Pip Installs Packages') installed,
        you can run pip to download and install the package::
        
            $ pip install xml2rfc
        
        .. _lxml:				http://lxml.de/
        .. _pip:				https://pypi.python.org/pypi/pip
        .. _xml2rfc distribution package:	https://pypi.python.org/pypi/pip
        .. _requests:				http://docs.python-requests.org/
        
        
        User Install
        ------------
        
        If you want to perform a local installation for a specific user,
        you have a couple of options.  You may use python's default location
        of user site-packages by specifying the flag ``--user``.  These locations are:
        
            * UNIX: $HOME/.local/lib/python<ver>/site-packages
            * OSX: $HOME/Library/Python/<ver>/lib/python/site-packages
            * Windows: %APPDATA%/Python/Python<ver>/site-packages
        
        You can additionally combine the flag ``--install-scripts`` with ``--user`` to
        specify a directory on your PATH to install the xml2rfc executable to.  For
        example, the following command::
        
            $ python setup.py install --user --install-scripts=$HOME/bin
        
        will install the xml2rfc library and data to your local site-packages
        directory, and an executable python script ``xml2rfc`` to $HOME/bin.
        
        Custom Install
        --------------
        
        The option ``--prefix`` allows you to specify the base path for all
        installation files.  The setup.py script will exit with an error if your
        PYTHONPATH is not correctly configured to contain the library path
        the script tries to install to.
        
        The command is used as follows::
        
            $ python setup.py install --prefix=<path>
        
        For further fine-tuning of the installation behavior, you can get a list
        of all available options by running::
        
            $ python setup.py install --help
        
        Usage
        =====
        
        xml2rfc accepts a single XML document as input and outputs to one or more conversion formats.
        
        **Basic Usage**: ``xml2rfc SOURCE [options] FORMATS...``
        
        **Options**
            The following parameters affect how xml2rfc behaves, however none are required.
            
            ===============  ======================= ==================================================
            Short            Long                    Description
            ===============  ======================= ==================================================
            ``-C``           ``--clear-cache``       purge the cache and exit
            ``-h``           ``--help``              show the help message and exit
            ``-n``           ``--no-dtd``            disable DTD validation step
            ``-N``           ``--no-network``        don't use the network to resolve references
            ``-q``           ``--quiet``             dont print anything
            ``-v``           ``--verbose``           print extra information
            ``-V``           ``--version``           display the version number and exit
        
            ``-b BASENAME``  ``--basename=BASENAME`` specify the base name for output files
            ``-c CACHE``     ``--cache=CACHE``       specify an alternate cache directory to write to
            ``-D DATE``      ``--date=DATE``         run as if todays date is DATE (format: yyyy-mm-dd)
            ``-d DTD``       ``--dtd=DTD``           specify an alternate dtd file
            ``-o FILENAME``  ``--out=FILENAME``      specify an output filename
            ===============  ======================= ==================================================
        
        **Formats**
            At least one but as many as all of the following output formats must
            be specified. The destination file will be created according to the
            argument given to --filename.  If no argument was given, it will
            create the file(s) "output.format".  If no format is specified, xml2rfc
            will default to paginated text (``--text``).
        
            ===========     ============================================================
            Command         Description
            ===========     ============================================================
            ``--raw``       outputs to a text file, unpaginated
            ``--text``      outputs to a text file with proper page breaks
            ``--nroff``     outputs to an nroff file
            ``--html``      outputs to an html file
            ``--exp``       outputs to an XML file with all references expanded
            ===========     ============================================================
        
        
        **Examples**
            | ``xml2rfc draft.xml``
            | ``xml2rfc draft.xml --dtd=alt.dtd --basename=draft-1.0 --text --nroff --html``
        
        Dependencies
        ============
        xml2rfc depends on the following packages:
        
        * lxml_ *(> 2.2.7)*
        * requests_ *(> 2.5.0)*
        
        
        Changelog
        =========
        
        
        Version 2.11.1 (11 Oct 2018)
        ------------------------------------------------
        
        
          * Changed linebreaking for URLs in boilerplate and references to the old 
            behaviour (don't break), added stream abbreviations according to RFC5741, 
            and changed EMail: to Email: in RFC mode.
        
          * Added the align attribute for element <table> to the schema.
        
          * Changed the v2v3 converter handling of the table align attribute, and 
            fixed an issue with lost whitespace after <spanx>.
        
          * Added STD to the seriesInfo sort order list.
        
          * Added an error message for <date> month content that is neither a month 
            name or a number.
        
        
        
        
        
        
        
        Version 2.11.0 (07 Oct 2018)
        ------------------------------------------------
        
        
          This release is a result of the issue discussions on xml2rfc-dev, and
          attempt to follow the discussion and projected resolution of issues #36-#40.
          This results in a number of incompatibilities with previous releases, with
          respect to the v3 tools, as expected.  The v2 tools are unaffected.
          Details:
        
          * Changed the default table alignment to 'center', in order to match v2.
        
          * Changed the <dl> 'hanging' attribute name to 'newline', based on the 
            discussion of issue #38, in the schema, v2v3 converter and text formatter.
        
          * Added an attribute 'indent' to <dl> in the schema, according to the 
            discussion of issue #39.  Added v2v3 and text support for the same.
        
          * Added markers='true' in the v2v3 converter for sourcecode with markers,
            and tweaked render_sourcecode() to honour the 'markers' setting.
        
          * Removed the disallowed align attribute on sourcecode.
        
          * Removed <br> from the schema, according to the resolution of issue #37.
        
          * Tweaked the handling of the document title to only reflow if needed, 
            with some refactoring.
        
          * Corrected the handling of the align attribute on <artwork> and <figure>.
        
          * Changed <prepTime> to hold an RFC 3339 timestamp with seconds 
            resolution.
        
          * Fixed a couple of issues with v2v3 conversion warnings, and added 
            source line information for all elements created during conversion.
        
          * Fixed a buglet in sourcode rendering.
        
          * Added a warning about lxml versions that lack validation error xpath 
            information, and tweaked the warn() method.
        
        
        
        
        
        
        
        Version 2.10.3 (22 Sep 2018)
        ------------------------------------------------
        
        
          This bugfix release works around a problem with lxml versions before 3.8.0,
          and brings some other fixes and tweaks:
        
          * Tweaked validation output to not break if validation error log elements
            lack xpath information. Fixes issue #376.  (lxml<3.8.0 does not provide
            the xpath of the offending element in error.path).
        
          * Fixed a couple of issues with v2v3 conversion warnings, and added 
            element sourceline information for all elements created during conversion.
        
          * Fixed a buglet in sourcode rendering.
        
          * Added a warning about lxml versions that lack validation error xpath 
            information, and tweaked the warn() method.
        
          * Tweaked the rendering of <eref>.
        
          * Added <blockquote> to the list of block level elements in isblock().
        
          * Added some values to xml2rfc.base.default_options, necessary when using 
            xml2rfc as a library module (i.e., not getting options from run.py through 
            command-line invocation).
        
          * Added attribute markers="true"|"false" to <sourcecode> and changed the v3
            text formatter to only output code markers if <sourcecode> has attribute
            markers set to true.
        
        
        
        
        
        
Platform: UNKNOWN
Classifier: Development Status :: 5 - Production/Stable
Classifier: Environment :: Console
Classifier: Operating System :: MacOS :: MacOS X
Classifier: Operating System :: Microsoft :: Windows
Classifier: Operating System :: POSIX :: Linux
Classifier: Programming Language :: Python
Classifier: Topic :: Text Processing
Classifier: Topic :: Text Processing :: Markup :: XML
Classifier: License :: OSI Approved :: BSD License
