2022-04-10  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/FAQ.txt, docs/nut.dict: docs/FAQ.txt: add more reasons and
	  symptoms that a running driver disappears
	* docs/FAQ.txt, docs/nut.dict: docs/FAQ.txt: suggest checking Linux
	  USB HID Quirk [#630]
	* ci_build.sh: ci_build.sh: use "gmake" for "./ci_build.sh
	  spellcheck" if available and no particular MAKE was requested
	* docs/FAQ.txt, docs/nut.dict: docs/FAQ.txt: suggest how to pick
	  drivers for bogus vendor IDs
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: bump version for #1356
	  and #1359
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: bump version for
	  #584
	* drivers/mge-hid.c: drivers/mge-hid.c: bump version for #1357

2022-04-09  Stuart Henderson <sthen@users.noreply.github.com>

	* drivers/usbhid-ups.c: reinstate handling for STATUS(ONLINE) in
	  usbhid-ups  The recent onlinedischarge changes removed support for
	  some STATUS(ONLINE) cases, affecting at least CP1300EPFCLCD - this
	  brings them back.

2022-04-08  Jim Klimov <jimklimov+nut@gmail.com>

	* NEWS: NEWS: note Liebert/Phoenixtec vs MGE HID handling of VendorID
	  0x06da
	* drivers/mge-hid.c: drivers/mge-hid.c: mge_claim(): test that
	  VendorID==PHOENIXTEC 0x06da has also Vendor or Product containing
	  "AEG"
	* data/driver.list.in: data/driver.list.in: update for "PowerWalker
	  VFI 2000 TGS" via "usbhid-ups" [#564]
	* docs/man/usbhid-ups.txt: docs/man/usbhid-ups.txt: update for "some
	  PowerWalker models"

2022-04-08  Jim Klimov <jimklimov@gmail.com>

	* NEWS: NEWS: tripplite_usb recognizes "3005" protocol for NUT v2.7.5

2022-04-08  Jim Klimov <jimklimov+nut@gmail.com>

	* NEWS, docs/nut.dict: NEWS: improve PowerWalker VFI 2000 TGS support
	  in NUT v2.7.5
	* drivers/liebert-hid.c, drivers/mge-hid.c: drivers/liebert-hid.c:
	  get PowerWalker VFI 2000 TGS working, read values correctly  This
	  reverts commit c38b45a56a9d1283657d62a9fa1ed1af5daa1ba2 which added
	  such support into mge-hid.c (at risk to proper support of earlier
	  handled devices by various vendors), and transplants the new lines
	  into liebert-hid.c  See issue #560 for a HID walk from the device
	  in question; data like that may help expand liebert-hid.c later
	  (its table seems to map a lot less field names than mge-hid.c, but
	  not sure if "true" Liebert/Phoenixtec HID devices support the
	  rest).

2022-04-07  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: instcmd(): do not risk
	  NULL-dereference debugging about "using Path" with a NULL hidpath
	  (just in case) [#1346]
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: instcmd(): do not risk
	  NULL-dereference debugging about "using Path" too early [#1346]
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: instcmd(): wrap some
	  long lines

2022-04-07  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: docs/nut.dict: update spellchecker
	* docs/nut.dict: docs/nut.dict: update spellchecker

2022-04-05  Jim Klimov <jimklimov@gmail.com>

	* docs/man/upsmon.conf.txt: docs/man/upsmon.conf.txt: fix markup
	  (pluses make emphasis and xmllint goes upset)

2022-04-04  Jim Klimov <jimklimov+nut@gmail.com>

	* INSTALL.nut: INSTALL.nut: add another perspective on packages vs
	  source builds; refer to config-prereqs.txt
	* INSTALL.nut: INSTALL.nut: trim trailing spaces
	* README: README: trim trailing spaces
	* README: README: clarify use of github
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  clarify pre-installation of python and perl
	* docs/config-prereqs.txt: docs/config-prereqs.txt: clarify that non-
	  GNU makes should work well

2022-04-02  Jim Klimov <jimklimov+nut@gmail.com>

	* scripts/python/app/NUT-Monitor: scripts/python/app/NUT-Monitor: fix
	  typo, thank CI
	* UPGRADING: UPGRADING: detail the Py2/Py3 packages
	* UPGRADING: UPGRADING: make note of systemd and Py2/3 changes on top
	  for packagers to see
	* NEWS: NEWS: detail the split of NUT-Monitor and new wrapper script
	* scripts/python/app/README: scripts/python/app/README: update with
	  sections; list Desktop menu integration and Kudos
	* scripts/python/app/.gitignore, scripts/python/app/NUT-Monitor,
	  scripts/python/app/nut-monitor.desktop: Introduce new NUT-Monitor
	  name-holder as a wrapping script to pick usable implementation
	* scripts/python/app/.gitignore: GitIgnore newly named variants of
	  NUT-Monitor-py2gtk2 and NUT-Monitor-py3qt5
	* scripts/python/app/README: scripts/python/app/README: document how
	  to get localized UI in dev/testing
	* scripts/python/app/README: scripts/python/app/README: document how
	  to run UI app in-place
	* m4/nut_check_python.m4: m4/nut_check_python.m4: extend list of some
	  python interpreter filenames
	* configure.ac, scripts/python/Makefile.am, scripts/python/app/{NUT-
	  Monitor.in => NUT-Monitor-py2gtk2.in}, scripts/python/app/nut-
	  monitor-py2gtk2.desktop, scripts/python/app/nut-monitor.desktop,
	  scripts/python/app/{ => ui}/gui-1.3.glade, scripts/python/app/{ =>
	  ui}/gui-1.3.glade.h: Rename NUT-Monitor UI app to NUT-Monitor-
	  py2gtk2
	* configure.ac, scripts/python/Makefile.am, scripts/python/app/{NUT-
	  Monitor.in => NUT-Monitor-py3qt5.in}, scripts/python/app/nut-
	  monitor-py3qt5.desktop, scripts/python/app/nut-monitor.desktop:
	  Rename modernized NUT-Monitor UI app to NUT-Monitor-py3qt5

2022-02-21  Luke Dashjr <luke-jr+git@utopios.org>

	* scripts/python/Makefile.am, scripts/python/README,
	  scripts/python/app/NUT-Monitor.in, scripts/python/app/README,
	  scripts/python/app/gui-1.3.glade,
	  scripts/python/app/gui-1.3.glade.h, scripts/python/app/nut-
	  monitor.desktop, scripts/python/app/ui/aboutdialog1.ui,
	  scripts/python/app/ui/dialog1.ui, scripts/python/app/ui/dialog2.ui,
	  scripts/python/app/ui/window1.ui: NUT-Monitor: Port to
	  Python3+PyQt5

2022-02-13  Luke Dashjr <luke-jr+git@utopios.org>

	* scripts/python/app/NUT-Monitor.in: NUT-Monitor: Run py2to3-3.10

2022-04-01  Jim Klimov <jimklimov+nut@gmail.com>

	* scripts/python/README: scripts/python/README: clarify that
	  `test_nutclient.py` requires an `upsd` running
	* scripts/python/module/PyNUT.py.in:
	  scripts/python/module/PyNUT.py.in: fix typo (fallout of #840)
	* docs/config-prereqs.txt: docs/config-prereqs.txt: fix typos in
	  OpenIndiana chapter
	* NEWS, docs/net-protocol.txt, docs/nut.dict, server/netcmds.h: Add
	  "PROTVER" as alias to "NETVER" for NUT v2.8.0  Closes: #1347

2022-03-31  Jim Klimov <jimklimov+nut@gmail.com>

	* Makefile.am, docs/Makefile.am, docs/man/Makefile.am:
	  {.,docs,docs/man}/Makefile.am: add "all-man" target to build all
	  possible man pages (vs ones for enabled drivers), and weave this
	  and check targets to parent makefiles
	* ci_build.sh: ci_build.sh: introduce shortcut for
	  BUILD_TYPE=fightwarn-all
	* ci_build.sh: ci_build.sh: in BUILD_TYPE=default-all-errors report
	  visibly when no failures happened
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: treat
	  /usr/pkg/include as -isystem
	* common/parseconf.c, common/str.c, drivers/apcsmart-old.c,
	  drivers/apcsmart.c, drivers/mge-utalk.c, drivers/serial.c,
	  drivers/snmp-ups.c, server/conf.c: Cast (size_t)(char) for
	  isprint(), isspace(), isdigit(), toupper(), etc. who may be macros
	  and use it as array subscript (due to sys/ctype_inline.h)

2022-03-30  Jim Klimov <jimklimov+nut@gmail.com>

	* autogen.sh: autogen.sh: suggest to export PYTHON=python-x.y
	* autogen.sh: autogen.sh: detect more python-x.y filenames
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  add chapter for NetBSD 9.2 builder setup
	* docs/config-prereqs.txt: docs/config-prereqs.txt: drop bogus
	  command (copy-paste typo)

2022-03-29  Jim Klimov <jimklimov@gmail.com>

	* .github/pull_request_template.md: Update pull_request_template.md

2022-03-28  Benjamin Berg <bberg@redhat.com>

	* scripts/upower/95-upower-hid.hwdb, scripts/upower/95-upower-
	  hid.rules, tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: Use hwdb for
	  UPower rules

2022-03-28  Jim Klimov <jimklimov+nut@gmail.com>

	* ci_build.sh: ci_build.sh: recognize more "*bsd" CI_OS_NAME values
	* ci_build.sh: ci_build.sh: do not make noise about non-ubiquitous
	  options to "uname" program
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: set the onlinedischarge
	  variable based on flag presence
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: drop
	  DEFAULT_ONLINEDISCHARGE to match "VAR_FLAG" semantics
	* docs/nut.dict: docs/nut.dict: add onlinedischarge
	* NEWS: NEWS: clarify that NUT 2.8.0 is new name for old planned NUT
	  2.7.5
	* NEWS: NEWS: added usbhid-ups onlinedischarge for NUT v2.7.5
	* docs/man/usbhid-ups.txt: docs/man/usbhid-ups.txt: document
	  onlinedischarge
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix var usage for
	  upsname
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix format string for
	  "onlinedischarge" help

2022-03-26  Jim Klimov <jimklimov+nut@gmail.com>

	* ci_build.sh: ci_build.sh: default to clang if also available when
	  default gcc is too old

2022-03-25  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: update openbsd
	  tools for man-page builds
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: avoid failure-prone
	  build toolkits for manpage tests
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: avoid
	  configure noise message
	* m4/ax_check_compile_flag.m4: m4/ax_check_compile_flag.m4: extend to
	  check conftest.err log about unsupported flags
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: define
	  axisCombos_COMPILER_GCC_TOO_OLD near other compiler-related combos
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: fix scenarios with
	  "non-fatal warnings" that had BUILD_WARNFATAL=yes anyway (copy-
	  paste issue)

2022-03-24  Jim Klimov <jimklimov+nut@gmail.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: avoid even running
	  axisCombos_GCC_TOO_OLD where we require fatal warnings
	* configure.ac: configure.ac: for very old GCC where we are not in
	  control of warnings, make them non-fatal always (for "auto" level)
	* drivers/libhid.c: drivers/libhid.c: clang-3.4 does not know
	  "-Wtautological-type-limit-compare" either
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: make use of
	  dsbcStageTimeoutSettings

2022-03-23  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: with nut_enable_warnings=auto, avoid
	  fatal warnings with GCC 4.3 or older (no support for diags pragmas)
	* configure.ac: configure.ac: report initial nut_enable_warnings
	  (default or argument)
	* configure.ac: configure.ac: pre-set nut_enable_warnings=auto by
	  default (not hardcoded "medium")
	* ci_build.sh: ci_build.sh: set BUILD_WARNOPT and BUILD_WARNFATAL to
	  "auto" for BUILD_TYPE="fightwarn"* shortcuts (survive antique
	  compilers, default to medium/fatal normally)
	* ci_build.sh: ci_build.sh: comment BUILD_WARNOPT setting for
	  BUILD_TYPE="fightwarn"* shortcuts
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: enable back
	  the "-isystem" tuning to not complain about packaged third-party
	  headers
	* drivers/libhid.c: drivers/libhid.c: make use of
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TAUTOLOGICAL_TYPE_LIMIT_COMPARE
	  (clang-6.0.0 of OpenBSD 6.4)
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  [HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TAUTOLOGICAL_TYPE_LIMIT_COMPARE
	* configure.ac: configure.ac: specify AC_PREREQ([2.64])
	* m4/nut_check_libgd.m4: m4/nut_check_libgd.m4: fix detection of
	  gdImagePng() with additional link requirements
	* configure.ac: configure.ac: document practical requirement for
	  AC_PREREQ(2.64)
	* NEWS, UPGRADING, docs/config-notes.txt, docs/man/upscmd.txt,
	  docs/man/upsrw.txt: docs, NEWS, UPGRADING: rename 2.7.5 to 2.8.0 in
	  text that appeared after 2.7.4
	* docs/net-protocol.txt: docs/net-protocol.txt: document "PRIMARY" as
	  alias to "MASTER"
	* docs/net-protocol.txt: docs/net-protocol.txt: bump next release
	  from 2.7.5 to 2.8.0
	* configure.ac: configure.ac: bump NUT_NETVERSION to 1.3 to match
	  docs/net-protocol.txt

2022-03-21  Jim Klimov <jimklimov+nut@gmail.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: scripts/subdriver/gen-
	  snmp-subdriver.sh: fix back markup for mib2nut_info_t lines
	  Follow-up for #1327 Thanks to @aquette

2022-03-19  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: qx_ups_walk(): log the
	  change of estimated remaining runtime
	* NEWS: NEWS: nutdrv_qx: enhanced estimation of remaining battery
	  runtime for NUT v2.7.5
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: comment about source and
	  data for estimated runtime corrections
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix trailing whitespace
	* ci_build.sh: ci_build.sh: when parsing BUILD_TYPE=fightwarn, do not
	  default NUT_SSL_VARIANTS and NUT_USB_VARIANTS to "auto" - so
	  building just one variant at most, even if agent supports more
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: snr_command(): adapt to
	  usb_ctrl_charbuf

2022-03-16  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/libhid.h, drivers/usbhid-ups.c: drivers/libhid.h, usbhid-
	  ups.c: define HID_DEV_HANDLE_CLOSED usable for both SHUT and USB
	  cases

2022-03-15  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/libusb0.c, drivers/libusb1.c: drivers/libusb{0,1}.c: retry
	  getting Manufacturer/Product/Serial a few times if failed on the
	  first  Kudos to Sam Varshavchik for proposing this code change in
	  discussion https://github.com/networkupstools/nut/issues/414
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: try to close libusb
	  handle before reconnecting (from discussion of issue #414)

2022-03-16  Jim Klimov <jimklimov@gmail.com>

	* NEWS: NEWS: added driver adelsystem_cbi for NUT v2.7.5
	* drivers/adelsystem_cbi.h: drivers/adelsystem_cbi.h: functions
	  implemented in a header should be static
	* drivers/adelsystem_cbi.c: drivers/adelsystem_cbi.c: extend pragmas
	  for covered/requred "default" case to work with clang-3.4

2022-03-15  Jim Klimov <jimklimov@gmail.com>

	* ci_build.sh: ci_build.sh: if we only build USB variant(s), do not
	  shy away from testing some SSL and whatever drivers we can

2022-03-15  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: currently refrain
	  from clang-13 in OI
	* docs/config-prereqs.txt: docs/config-prereqs.txt: mark aspell as
	  recommended (it is not big)
	* docs/config-prereqs.txt: docs/config-prereqs.txt: update
	  instructions for symlinks on OI
	* docs/config-prereqs.txt: docs/config-prereqs.txt: fix typos in
	  instructions for OpenIndiana, and update for new toolkits available
	  in 2022

2022-03-12  Jim Klimov <jimklimov@gmail.com>

	* ci_build.sh: ci_build.sh: add support for CI_CROSSBUILD_HOST and/or
	  CI_CROSSBUILD_TARGET settings [#1294, #1289, #1334]
	* ci_build.sh: ci_build.sh: check for "gd" as one of names gdlib can
	  go by
	* ci_build.sh: ci_build.sh: use PKG_CONFIG variable if provided (fall
	  back to pkg-config from PATH, but only for this script itself)
	  [#710]
	* drivers/salicru-hid.c: Update salicru-hid.c  Cosmetic fixes
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: improve
	  checks for actually present priv/auth protocols [#1289]  Great
	  thanks to @eklinedi on GitHub for finding the issue and
	  investigating ways to fix it
	* drivers/snmp-ups.h: drivers/snmp-ups.h: net-snmp after v5.9.1 does
	  not declare ONE_SEC that our code uses; stash the definiton
	* configure.ac, m4/ax_c_pragmas.m4, m4/ax_run_or_link_ifelse.m4,
	  m4/nut_compiler_family.m4: Introduce m4/ax_run_or_link_ifelse.m4 to
	  facilitate cross-builds [#1289]
	* ci_build.sh: ci_build.sh: report OS_* envvar values if passed by
	  caller

2022-03-12  juantonio <admin@ofi.linkpc.net>

	* drivers/salicru-hid.c: Add tested descriptors for Salicru Twin Pro
	  2

2022-03-12  Jim Klimov <jimklimov@gmail.com>

	* ci_build.sh: ci_build.sh: expand a bit CI_OS_HINT detection on
	  linux systems

2022-03-11  Jim Klimov <jimklimov@gmail.com>

	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: quiesce
	  -Wreserved-identifier (clang 13+) that acts up on system headers
	* drivers/riello.c: drivers/riello.c: riello_parse_re(): assign
	  Pout#W and Pout#VA from pom_long not pom_word
	* drivers/belkinunv.c: drivers/belkinunv.c: instcmd(): find use for
	  "r" to at least report failed cmds

2022-03-11  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: rearrange
	  packages to not require heavy ones by default dependency footprint
	  (aspell, docs generation and libgd)
	* server/netuser.c: server/netuser.c: copy-paste typo fix
	* NEWS, UPGRADING: NEWS: rename pending NUT release from 2.7.5 to
	  2.8.0 (config files using new keywords are not backwards-
	  compatible, not usable by old binaries)
	* NEWS: NEWS: added battery.mfr.date APC HID UPS setting for NUT
	  v2.7.5
	* NEWS, docs/nut.dict: NEWS: added socomec_jbus driver for NUT v2.7.5
	* server/netuser.c: server/netuser.c: net_master(): provide more
	  details about client using deprecated commands
	* docs/net-protocol.txt: docs/net-protocol.txt: update for "PRIMARY"
	  netcmd support (alias of "MASTER") [issue #840]
	* NEWS: NEWS: update for "PRIMARY" netcmd support (alias of "MASTER")
	  [issue #840]
	* scripts/python/module/PyNUT.py.in, server/netcmds.h,
	  server/netuser.c, server/netuser.h: netcmds.h, netuser.{c,h},
	  PyNUT.py.in: deprecate protocol "MASTER" command in favor of
	  "PRIMARY" [issue #840]
	* server/upsd.c: server/upsd.c: check_command(): instrument with
	  upsdebugx()
	* server/netuser.c: server/netuser.c: net_login(): instrument with
	  upsdebugx()
	* clients/upsmon.c: clients/upsmon.c: apply_for_primary(): request
	  elevation by PRIMARY, fall back to MASTER (for older upsd builds)
	* NEWS, UPGRADING: NEWS: rename pending NUT release from 2.7.5 to
	  2.8.0 (config files using new keywords are not backwards-
	  compatible, not usable by old binaries)

2022-03-10  Jim Klimov <jimklimov+nut@gmail.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh: put
	  back indented CFILE markup (fix here-docs, instead of
	  unmaintainable printf)
	* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh: fix
	  valid chars HOSTNAME input (e.g. IP)

2022-03-10  Jim Klimov <jimklimov@gmail.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: Update gen-snmp-
	  subdriver.sh  Quote variable expansions; replace `echo -n` with a
	  more portable `printf`

2022-03-10  Arnaud Quette <ArnaudQuette@eaton.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver generation
	  script: minor reformatting
	* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver generation
	  script: fixes and improvements

2022-03-08  Jim Klimov <jimklimov+nut@gmail.com>

	* tests/getvaluetest.c: tests/getvaluetest.c: check different methods
	  to combine two "wire" bytes into a lenght word (follows up for
	  #1320), hopefully all work the same on all architectures

2022-03-08  Thanos Chatziathanassiou <tchatzi@arx.net>

	* docs/man/socomec_jbus.txt: some documentatyion fixes

2022-03-08  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: simplify back the bit-
	  maths to cast into uint8_t following discussion in #1320
	* drivers/libusb0.c, drivers/libusb1.c: drivers/libusb{0,1}.c:
	  simplify back the bit-maths to cast into uint8_t following
	  discussion in #1320

2022-03-07  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: fix (commented-
	  away) hard_shutdown() to "unsigned char" and bit maths similar to
	  soft_shutdown()
	* drivers/riello_usb.c: drivers/riello_usb.c: Get_USB_Packet(): cast
	  bit maths to (unsigned char) to err on safe side
	* drivers/riello_usb.c: drivers/riello_usb.c: whitespace fix
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: upsdrv_initups(): cast
	  langid calculations to uint16_t (or wider) [similar to #1320]
	* drivers/libusb0.c, drivers/libusb1.c: drivers/libusb{1,0}.c:
	  {nut_}libusb_open(): cast rdlen calculations to uint16_t (or wider)
	  [follow-up from #1320]
	* drivers/libshut.c: drivers/libshut.c: shut_checksum(): address
	  (usb_ctrl_charbuf)buf as (unsigned char) in bit maths
	* drivers/libshut.c: drivers/libshut.c: BYTESWAP(): cast "in" to
	  (uint16_t) for bit maths and use a full-width mask
	* drivers/blazer_usb.c: drivers/blazer_usb.c: upsdrv_initups():
	  address (usb_ctrl_charbuf)tbuf as (unsigned char) in bit maths

2022-03-02  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: make sure
	  WITH_SNMP_LKP_FUN_DUMMY is defined

2022-02-27  Nita Vesa <werecatf@outlook.com>

	* drivers/apc-hid.c, drivers/usbhid-ups.c: APC HID UPS: Add ability
	  to set battery battery.mfr.date  Some APC UPSes allow for setting
	  battery.mfr.date, so it can be easily referenced later, even if
	  there were no stickers or papers left to refer to.  This patch has
	  been tested to work with APC Back-UPS ES 550G.

2022-03-02  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/mge-xml.c: drivers/mge-xml.c: mge_drycontact_info(): avoid
	  shadowing global variable

2022-02-28  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/libusb0.c: Cast to unsigned type when interpreting HID
	  descriptor length bytes (libusb 0.1)  The libusb 0.1 interface
	  definition declares a (signed) char type for control messages.  The
	  HID descriptor length contained within a control message is
	  intended to be interpreted as a pair of unsigned bytes so we must
	  cast to uint8_t when doing the arithmetic rather than trip over the
	  sign bit.  Closes #1261, closes #1312.

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: extend daisychain
	  initialization to use optional mapping function  Note: ported sub-
	  set of "snmp-ups.[ch] : add support for extended fun/nuf l2s/s2l
	  conversions and use it for daisychain initialization" without the
	  actual 2x2 "fun/nuf l2s/s2l" support here.

2022-02-27  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: daisychain_init(): add
	  debug trace
	* drivers/eaton-pdu-marlin-helpers.c: drivers/eaton-pdu-marlin-
	  helpers.c: marlin_device_count_fun(): add debug trace

2021-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_find_strval(): mark
	  NUT_UNUSED_VARIABLE(oid2info) when not WITH_SNMP_LKP_FUN

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: whitespace fix

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: snmp-ups.c : publish device.count==1 too

2021-10-13  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_find_strval() should
	  consider #if WITH_SNMP_LKP_FUN

2019-09-25  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/snmp-ups.c: Fix false positive when communication is lost

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  resync comments and use of SU_FLAG_SEMI_STATIC

2022-02-25  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  break long lines

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: avoid stringop-truncation
	  warning: make sure string is finite

2021-11-11  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: avoid stringop-truncation
	  warning

2021-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-helpers.c: drivers/eaton-pdu-marlin-
	  helpers.c: include config.h first

2021-11-25  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/powerware-mib.c: Eaton SNMP: also publish ups.load for
	  3phase  Though there is output.Lx.power.percent, for 3phase, it's
	  desirable to also have the standard ups.load

2022-01-12  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/mge-xml.c: Eaton NMC: fix the non publication of real/power
	  with 3ph  power and realpower for 3ph Lx were not publishing values
	  when they were 0

2021-11-22  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/mge-xml.c: Eaton XML/PDC: add External Battery Module count

2021-11-15  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c: Fix
	  regression on Eaton EMP002 temperature reading (SNMP)  Following
	  the recent addition of the "String reformating function"
	  (su_find_strval()), a regression appeared on a corner case: when
	  flagging a data with ST_FLAG_STRING, while the SNMP OID is an int,
	  and when there is a fun_vp2s() conversion function, a double
	  conversion is applied, resulting in no value published. This was
	  limited to one data (temperature.unit)

2021-06-14  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/powerware-mib.c, drivers/snmp-ups.c: Add missing outlet
	  objects for master

2021-02-01  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c: Fix dry
	  contacts status for EMP02

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups-helpers.c, drivers/snmp-ups.c: Move
	  su_temperature_read_fun() from drivers/snmp-ups.c to snmp-ups-
	  helpers.c

2021-01-26  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: fix regression on Eaton
	  ePDU  Fix a regression that caused a mis-determination of the SNMP
	  base OID index (0 or 1, should be 1). This in turn caused a mis-
	  iteration over the outlets, from 0 to N-1 instead of 1 to N, which
	  resulted in the missing Nth outlet (last outlet of the PDU). This
	  also caused some data refresh issues

2020-12-16  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/snmp-ups.c: Add
	  ambient.n.parent.serial for marlin epdu  Regarding dropped code
	  from snmp-ups.c - per discussion in
	  https://github.com/42ity/nut/pull/117 this was not a typo:  > It is
	  an intentional change for oid read value issue. > This allows to
	  actually retrieve an indirection value > (when an Oid points at an
	  Oid, like stood)

2020-12-15  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: Restore legacy Eaton ePDU
	  switchability info  Use a hack to also have switchability for both
	  the unit and its outlets on legacy Eaton G2 ePDU

2020-12-15  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c: Change uid
	  and modbus address name according nut nomenclature

2020-12-14  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/powerware-mib.c: Add modbus_address and uuid in snmp-ups/pw
	  driver

2019-11-07  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/powerware-mib.c: SNMP Eaton Gb Network Card: various data
	  completion  * fix reading of input.voltage, related to the ending
	  ".0", * fix existing commands handling, * add support for the load
	  segment (managed outlets), including status information and
	  commands

2019-09-19  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c: SNMP Eaton
	  EMP002: handle sensor presence  Sensor may not be present (or
	  connected). However, the values (temperature, humidity, ...) are
	  still available, but should not be considered

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/powerware-mib.c: drivers/powerware-mib.c: update comments
	  and implem for dummy
	  eaton_sensor_temperature_unit_fun()/su_temperature_read_fun() from
	  42ity/nut
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  update comments and implem for dummy
	  eaton_sensor_temperature_unit_fun()/su_temperature_read_fun() from
	  42ity/nut
	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c,
	  drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups.{c,h}:
	  adjust su_temperature_read_fun() API to that used in NUT master
	  branch
	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h: drivers/eaton-pdu-marlin-helpers.{c,h}: adjust
	  eaton_sensor_temperature_unit_fun() API to that used in NUT master
	  branch

2019-09-19  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-helpers.c: SNMP Eaton ePDU: always return
	  celsius for temperature  since the value reading is always adapted
	  to celsius

2016-05-25  Jim Klimov <jim@jimklimov.com>

	* drivers/powerware-mib.c: powerware-mib - renamed "ietf_*" and
	  "eaton_*" lookups to have "pw_*" prefix

2019-09-12  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-mib.c,
	  drivers/powerware-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h:
	  Typo fix: sorry Mr Fahrenheit  And thanks to Jim Klimov for the
	  review!
	* drivers/eaton-pdu-marlin-mib.c: Fix compilation warning

2019-09-09  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/powerware-mib.c: SNMP Eaton Gb Network Card: support for
	  EMPDT1H1C2

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-helpers.c: drivers/eaton-pdu-marlin-
	  helpers.c: fix whitespace

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-helpers.c: eaton-pdu-marlin-helpers.c : in
	  device_count helper do not assume a trailing comma (as last char)
	  as an extra device

2019-09-09  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h, drivers/eaton-pdu-marlin-mib.c: SNMP Eaton ePDU: support
	  for EMPDT1H1C2
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: support for
	  daisychained ambient sensor

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  align comments around outlet.%i.name with FTY version

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : preferred
	  templated outlet.%i.name goes last in MIB

2018-08-07  Jim Klimov <jim@jimklimov.com>

	* drivers/powerware-mib.c: powerware-mib.c : fix fallout from "snmp-
	  ups: support newer Genepi management cards" (unused variable
	  warning)

2018-08-07  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/powerware-mib.c: snmp-ups: support newer Genepi management
	  cards  * duplicate some OIDs, with refinement to point at the first
	  index (i.e ".0" or ".1.0") since otherwise the agent doesn't
	  respond to queries. This could be fixed at the snmp-ups level later
	  * fixed "ups.type" (power topology of the UPS) which was pointing
	  at the output.source or ups.mode

2022-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  align with "snmp-ups: Simplify the mapping structure" changes for
	  input.phases=>input.count

2017-11-17  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-ats16-nmc-mib.c, drivers/eaton-pdu-marlin-mib.c,
	  drivers/mge-mib.c, drivers/mge-xml.c, drivers/powerware-mib.c:
	  Modify "open" to "opened" for dry contacts status  While "open" is
	  the best adjective for the opposite of "closed", and thus suitable
	  for GPI status, this may lead to confusion with the GPO actions
	  "open|close" Vs the GPI status "opened|closed". These last are also
	  not inapropriate, since they can refer to the fact that the GPI
	  state has change due to some external action or event

2017-11-03  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-ats16-nm2-mib.c, drivers/eaton-ats16-nmc-mib.c,
	  drivers/mge-mib.c, drivers/mge-xml.c, drivers/powerware-mib.c: Add
	  support for dry contacts to Eaton ATS16 and UPS  Add support for
	  the 2 GPI accessible through EMP001 environmental sensor, connected
	  to a UPS or ATS16. The same is already available for Eaton ePDU.
	  This affect the snmp-ups driver (eaton_ats16 and pw/pxgx_ups MIBs),
	  and the netxml-ups driver

2022-02-25  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: avoid "#if" with possibly
	  not-defined macro

2018-08-02  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: Eaton feed color is semi
	  static

2018-06-26  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/nut-names.txt, drivers/eaton-pdu-marlin-mib.c: snmp-ups: Eaton
	  ePDU input.power.nominal is realpower  Fix data name, since the
	  published value is in Watts, so realpower, not power

2017-10-30  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c/dmf: add
	  outlet timers  Add support for shutdown and start timers

2022-02-25  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  relocate outlet.%i.load.off.delay etc like in FTY
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  break long lines like in FTY
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  break long lines

2017-10-17  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: fix Eaton ePDU group
	  phase handling  Remove the not needed SU_FLAG_UNIQUE and the
	  erroneous value lookup structure index
	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h, drivers/eaton-pdu-marlin-mib.c: snmp-ups: simplify Eaton
	  ePDU group phase handling

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h: eaton-pdu-marlin-* : add support for extended fun/nuf
	  l2s/s2l conversions

2017-10-13  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : updated
	  comments about input/feed relationship, and daisychain implications

2017-10-13  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: Problem: Need to fix published feed
	  variables  Solution: Attach 1 feed to the current input

2017-10-13  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : fix OID
	  and raise questions on input.power.nominal

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : Revised
	  added OIDs with a single-group ePDU  Also update line-breaks for
	  readability and 80-col standard

2017-10-09  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h, drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c /
	  drivers/eaton-pdu-marlin-helpers.[ch] : Implement conversion func
	  for "device.count" which returns a comma-separated list
	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h, drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c /
	  drivers/eaton-pdu-marlin-helpers.[ch] : Implement conversion func
	  for "outlet.group.%i.phase"
	* docs/nut-names.txt, drivers/eaton-pdu-marlin-mib.c: eaton-pdu-
	  marlin-mib.c : add basic listing of newly defined OIDs (not a full
	  solution - some mapping functions are needed and revision of MIB
	  data types)

2017-08-30  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: Fix typo in OID, noticed by aquette

2017-08-24  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/snmp-ups.c, drivers/snmp-
	  ups.h: snmp-ups / eaton-marlin : introduce WITH_SNMP_LKP_FUN to
	  separate codebases that support these callbacks from those that
	  currently do not
	* drivers/eaton-pdu-marlin-helpers.c, drivers/eaton-pdu-marlin-
	  helpers.h: eaton-pdu-marlin-helpers.c/h fix
	* drivers/eaton-pdu-marlin-helpers.c: eaton-pdu-marlin-helpers.c :
	  update comments for marlin_outlet_group_phase_fun()

2017-08-23  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am, drivers/eaton-pdu-marlin-helpers.c,
	  drivers/eaton-pdu-marlin-helpers.h: Expel the helper function that
	  interacts with dstate from eaton-pdu-marlin-mib.c to eaton-pdu-
	  marlin-helpers.c/.h

2016-05-13  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am, drivers/apc-iem-mib.h, drivers/apc-mib.c,
	  drivers/apc-mib.h: drivers/apc-iem-mib.h: split some macro
	  definitions away from apc-mib.h and apc-mib.c and snmp-ups.c

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups.[ch] : introduce
	  SU_FLAG_SEMI_STATIC

2022-02-24  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Update for Adelsystem CBI

2022-02-24  Jim Klimov <jimklimov+nut@gmail.com>

	* NEWS: NEWS: Update synchronous=auto for NUT v2.7.5
	* drivers/dstate.c: drivers/dstate.c: send_to_all(): port
	  do_synchronous auto=>on fallback from send_to_one()
	* drivers/dstate.c: drivers/dstate.c: send_to_one()/send_to_all():
	  make the success-report less verbose (level 6)
	* drivers/dstate.c: drivers/dstate.c: send_to_one()/send_to_all():
	  make the reconnection WARNING more visible
	* conf/ups.conf.sample, docs/man/ups.conf.txt, drivers/dstate.c,
	  drivers/main.c: driver/dstate.c, main.c: extend do_synchronous to
	  have an "auto" mode (now by default) so reconnections would be sync
	* drivers/dstate.c: drivers/dstate.c: send_to_one(): log at level 0
	  if write failed (twice maybe) and so driver is disconnecting
	* drivers/dstate.c: drivers/dstate.c: send_to_one(): log more details
	  if throttling down, and if it helped
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): log
	  "walking device %d" at level 1 now, and without a dot-number (to
	  avoid confusion)
	* drivers/dstate.c: drivers/dstate.c: send_to_one(): try to sleep and
	  resend failed posting; log the faults (and successes) at level 1

2022-02-23  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/dstate.c: drivers/dstate.c: send_to_all() send_to_one():
	  clarify "disconnecting" when logging that write failed
	* drivers/snmp-ups.c: drivers/snmp-ups.c: update comment for
	  snmp_ups_walk() for "single" device
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): for
	  "unitary" (non-daisychain member) devices, walk a ".1" device only
	  (should end up querying non-templated OIDs anyway) - avoid walking
	  .0 partially and .1 again for same data
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): log
	  walking an "unitary" device if not a daisy-chain, for balance
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): only log
	  "Skipping daisychain device.0" when in daisy-chain context (skip
	  anyway even for singular devices where we should also walk .1
	  anyway)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: update heading comments for
	  daisychain related variables
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): only skip
	  "device.0" if in daisy-chain mode
	* drivers/snmp-ups.c: drivers/snmp-ups.c: update comment for
	  current_device_number

2022-02-22  Thanos Chatziathanassiou <tchatzi@arx.net>

	* docs/man/socomec_jbus.txt, drivers/Makefile.am,
	  drivers/socomec_jbus.c: Added socomec_jbus implementation

2022-02-22  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): fix
	  taxonomy of "processing daisy-chain device" debug log

2022-02-19  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.c, server/upsd.c: drivers/snmp-ups.c
	  upsdrv_updateinfo(); server/upsd.c driver_free() mainloop(): trace
	  connection faults and reconnections better
	* drivers/dstate.c: drivers/dstate.c: send_to_one(): consistently use
	  "buflen"
	* drivers/dstate.c: drivers/dstate.c: send_to_all/send_to_one: extend
	  failed-send tracing

2022-02-19  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: wrap long lines, add
	  comments

2022-02-22  Jim Klimov <jim@jimklimov.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: scripts/subdriver/gen-
	  snmp-subdriver.sh: generate "standard MIB items" into new MIB
	  mappings  Kudos to @aquette for the catch in PR review

2022-02-21  Luke Dashjr <luke-jr+git@utopios.org>

	* scripts/python/Makefile.am, scripts/python/README,
	  scripts/python/app/NUT-Monitor.in, scripts/python/app/README,
	  scripts/python/app/gui-1.3.glade,
	  scripts/python/app/gui-1.3.glade.h, scripts/python/app/nut-
	  monitor.desktop, scripts/python/app/ui/aboutdialog1.ui,
	  scripts/python/app/ui/dialog1.ui, scripts/python/app/ui/dialog2.ui,
	  scripts/python/app/ui/window1.ui: NUT-Monitor: Port to
	  Python3+PyQt5

2022-02-19  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setOID(): uncomment the
	  fallback for "device.x.contact" not found as a "contact", and add
	  another to strip "device.1." => "device." to allow setting non-
	  templated values to daisy-chain master
	* drivers/snmp-ups.c, server/upsd.c: drivers/snmp-ups.c
	  upsdrv_updateinfo(); server/upsd.c driver_free() mainloop(): trace
	  connection faults and reconnections better
	* drivers/dstate.c: drivers/dstate.c: send_to_one(): consistently use
	  "buflen"
	* drivers/dstate.c: drivers/dstate.c: send_to_all/send_to_one: extend
	  failed-send tracing

2022-02-19  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: upsdrv_initups(): check
	  that there is no daisychain master entry before defining IETF-MIB
	  fallback defaults for contact/location/description
	* drivers/snmp-ups.c: drivers/snmp-ups.c: upsdrv_initups(): comment
	  and log that IETF-MIB fallback defaults for
	  contact/location/description are only read once (not updated while
	  driver runs)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_ups_get(): fake
	  current_device_number=1 to su_setinfo() when walking a daisy-chain
	  with non-templated OID
	* drivers/snmp-ups.c: drivers/snmp-ups.c: get_and_process_data(),
	  su_ups_get(): add tracing logs to make sense of daisy-chain OID
	  adaptations
	* drivers/snmp-ups.c: drivers/snmp-ups.c: wrap long lines, add
	  comments
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setinfo(): trace diags
	  for different code-paths about daisy-chained OID decisions
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setinfo(): this is not
	  the place to check for ".%i" after all

2022-02-18  Jim Klimov <jim@jimklimov.com>

	* tools/nut-dumpdiff.sh: tools/nut-dumpdiff.sh: revise to also strip
	  frequency measurements
	* tools/nut-dumpdiff.sh: tools/nut-dumpdiff.sh: revise to also strip
	  (load|temperature|humidity) measurements
	* docs/documentation.txt: docs/documentation.txt: document tools/nut-
	  dumpdiff.sh helper
	* tools/nut-dumpdiff.sh: tools/nut-dumpdiff.sh: revise to strip just
	  numeric measurements of (*.power|voltage|current)
	* tools/nut-dumpdiff.sh: tools/nut-dumpdiff.sh: extend to not strip
	  ALL numeric values but ones that are likely measurements
	* tools/Makefile.am, tools/nut-dumpdiff.sh: Add tools/nut-dumpdiff.sh
	  helper
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setOID(): handle e.g.
	  "device.contact" as either "device.0.contact" for "all devices" if
	  OID is templated or NULL, or "device.1.contact" for "master device"
	  in other cases
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setOID(): import
	  (commented away - not deemed necessary so far) fallback for e.g.
	  "device.x.contact" is not found as a "contact"
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setinfo(): fix comment
	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix "device.varname" for
	  daisychain 'master' units  * su_setinfo(): should not expose
	  master-specific data (like device.contact coming from IETF un-
	  templated data points not aware about daisy chains) as if it were
	  the data specific to every device in the chain; note that for
	  defaulted data (like device.type="pdu" hardcoded with NULL OID) we
	  still expose it across the board  * su_setOID(): "upsrw ...
	  device.contact" should change the daisychain master device (for
	  IETF un-templated data; but in this commit - always)

2022-02-17  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_setOID(): fix mis-
	  interpretation of "device*" as always a daisy-chain
	* drivers/snmp-ups.c: drivers/snmp-ups.c: use "hard-coded" IETF MIB
	  for read-only access to sysDescr also (only if mib2nut does not yet
	  define a better value)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: use "hard-coded" IETF MIB
	  for read-only access to sysContact and sysLocation only if mib2nut
	  does not yet define a better value
	* drivers/emerson-avocent-pdu-mib.c: drivers/emerson-avocent-pdu-
	  mib.c: whitespace fix
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  whitespace fix
	* drivers/apc-mib.c: drivers/apc-mib: whitespace fix
	* drivers/xppc-mib.c: drivers/xppc-mib.c: whitespace fix
	* drivers/apc-ats-mib.c, drivers/apc-mib.c, drivers/baytech-mib.c,
	  drivers/bestpower-mib.c, drivers/compaq-mib.c, drivers/cyberpower-
	  mib.c, drivers/delta_ups-mib.c, drivers/eaton-ats16-nm2-mib.c,
	  drivers/eaton-ats16-nmc-mib.c, drivers/eaton-pdu-genesis2-mib.c,
	  drivers/eaton-pdu-marlin-mib.c, drivers/eaton-pdu-pulizzi-mib.c,
	  drivers/eaton-pdu-revelation-mib.c, drivers/emerson-avocent-pdu-
	  mib.c, drivers/hpe-pdu-mib.c, drivers/huawei-mib.c, drivers/ietf-
	  mib.c, drivers/mge-mib.c, drivers/netvision-mib.c,
	  drivers/powerware-mib.c, drivers/raritan-pdu-mib.c,
	  drivers/raritan-px2-mib.c, drivers/xppc-mib.c: drivers/*-mib.c:
	  define standard-MIB entries for device.description, contact,
	  location (RW STRING)

2016-09-16  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.h: snmp-ups: update todo list  The addition of
	  sysContact and sysLocation support is now addressed centrally
	* drivers/snmp-ups.c: snmp-ups: add sysContact and sysLocation
	  support  The generic MIB-2 provides system contact and location
	  information that are now publish respectively as device.contact and
	  device.location

2022-02-18  Viktor Kuzmin <kvaster@gmail.com>

	* configure.ac: Fix individual drivers configuration

2022-02-17  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c: handle covered-switch-default and switch-
	  enum warnings
	* drivers/adelsystem_cbi.h: clean up, fix typos
	* drivers/adelsystem_cbi.c: clean up, fix typos
	* docs/man/Makefile.am, docs/man/adelsystem_cbi.txt: man page added

2022-02-17  Jim Klimov <jim@jimklimov.com>

	* clients/upscmd.c, clients/upsrw.c: clients/upsrw.c, upscmd.c: fix
	  sanity-check of tracking_id length (forgot the nul-byte)
	* scripts/systemd/nut-driver@.service.in: scripts/systemd/nut-
	  driver@.service.in: make sure drivers always try to start and
	  connect - how ever many attempts that takes
	* scripts/systemd/nut-driver@.service.in: scripts/systemd/nut-
	  driver@.service.in: comment about "Before=nut-driver.target"
	  constraint
	* scripts/systemd/nut-driver@.service.in: scripts/systemd/nut-
	  driver@.service.in: make sure drivers always try to start and
	  connect

2022-02-16  Jim Klimov <jim@jimklimov.com>

	* drivers/libhid.c: drivers/libhid.c: string_to_path(): report
	  hid_lookup_usage() miss
	* drivers/libhid.c: drivers/libhid.c: fix misfire of fightwarn commit
	  58e5b49 (string_to_path(): range-check...)  Closes: #1286
	* conf/upsd.conf.sample, conf/upsmon.conf.sample.in,
	  docs/man/upsd.conf.txt, docs/man/upsmon.conf.txt: upsd and upsmon
	  configuration sample files and man pages: add note about run-time
	  config reload with DEBUG_MIN setting in sight

2022-02-16  Jim Klimov <jimklimov+nut@gmail.com>

	* clients/upsmon.c: clients/upsmon.c: restructure config reload for
	  debug_min to be more similar to that in upsd.c
	* clients/upsmon.c: clients/upsmon.c: whitespace fix

2022-02-16  Jim Klimov <jim@jimklimov.com>

	* clients/upsmon.c: clients/upsmon.c: allow upsmon to reload config
	  and apply its debug_min setting
	* common/common.c: common/common.c: writepid(): debug-trace creation
	  of a PID file

2022-02-16  Jim Klimov <jimklimov+nut@gmail.com>

	* scripts/systemd/nut-server.service.in: scripts/systemd/nut-
	  server.service.in: reload upsd without PID file [for #1299]
	* server/conf.c: server/conf.c: allow upsd to reload config and apply
	  its debug_min setting
	* clients/upsmon.c, docs/man/upsmon.txt: clients/upsmon.c: add "-P
	  pid" arg handling, and report result of sendsignal(), like in upsd
	  [for #1299, #123]
	* docs/man/upsd.txt, scripts/systemd/nut-server.service.in,
	  server/upsd.c: upsd.c: add -FF option to stay foregrounded AND
	  write the PID file, use it in systemd/nut-server.service [for
	  #1299]
	* docs/man/upsd.txt, server/upsd.c: server/upsd.c: add "-P PID" arg
	  for commands [for #1299]
	* common/common.c, include/common.h: include/common.h, common.c:
	  refactor sendsignalfn() into parsepid() and sendsignalpid()
	  reusable methods
	* server/upsd.c: server/upsd.c: warn about not saving a pid file
	* server/upsd.c: server/upsd.c: handle extended return values from
	  sendsignalfn() to tell more about the error
	* common/common.c: common/common.c: sendsignalfn(): if we use sig==0
	  to probe that a process runs, no need to send that twice
	* common/common.c, include/common.h: include/common.h, common.c:
	  extend sendsignalfn() return value for more error types

2022-02-15  Jim Klimov <jim@jimklimov.com>

	* drivers/main.c: drivers/main.c: fix user:group separator in debug
	  message
	* configure.ac: configure.ac: report default/detected
	  RUN_AS_USER/RUN_AS_GROUP values in help; check if "nobody" group is
	  not resolvable when "nogroup" us to use it as default RUN_AS_GROUP
	  instead
	* drivers/main.c: drivers/main.c: report whether we succeeded or
	  failed chown/chmod for sockname
	* docs/man/nutupsdrv.txt, docs/man/ups.conf.txt, drivers/main.c:
	  drivers/main.c: support setting group name for socket file
	  (ups.conf, CLI -g arg)  Closes: #1296
	* drivers/dstate.c, drivers/dstate.h, drivers/main.c: drivers/main.c
	  + dstate.{c,h}: refactor dstate_init() to return a copy of the
	  "sockname" path used
	* drivers/main.c: drivers/main.c: re-word debug message for "-u name"
	  overriding built-in or configured values
	* drivers/main.c: drivers/main.c: trace do_global_args() and
	  main_arg() var/val stream
	* docs/hid-subdrivers.txt: docs/hid-subdrivers.txt: describe tech for
	  "Fixing report descriptors"
	* docs/hid-subdrivers.txt, docs/nut.dict, drivers/hidtypes.h:
	  docs/hid-subdrivers.txt: document where USAGE_POW_ and USAGE_BAT_
	  macros come from
	* drivers/apc-hid.c: drivers/apc-hid.c: apc_fix_report_desc():
	  normalize indentations

2022-02-14  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/apc-hid.c: Update APC HID driver version
	* drivers/apc-hid.c: Only indicate report descriptor fixed if it was
	  actually changed.

2022-02-14  Jim Klimov <jim@jimklimov.com>

	* docs/man/ups.conf.txt, drivers/main.c: drivers/main.c: allow to
	  specify a user for each driver via ups.conf  Closes: #1288
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: suggest "-d" when warning
	  about passing debugging through to actual drivers
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: only warn about passing
	  debugging through to actual drivers if (nut_debug_level_passthrough
	  == 0)
	* docs/man/upsdrvctl.txt, drivers/upsdrvctl.c: drivers/upsdrvctl: add
	  "-d" option to pass debug level to drivers  Closes: #1036  (Note:
	  that issue discusses other possible improvements around this
	  subject, which are synergetic with this one)

2022-02-13  Luke Dashjr <luke-jr+git@utopios.org>

	* scripts/python/app/NUT-Monitor.in: NUT-Monitor: Run py2to3-3.10

2022-02-13  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/apc-hid.c, drivers/cps-hid.c, drivers/hidparser.c,
	  drivers/hidparser.h, drivers/hidtypes.h: Fix incorrect limits for
	  input and config voltages in APC report descriptor  The Back-UPS XS
	  1400U has been observed to report input/config voltage limits that
	  are appropriate for the North American 120V region even though the
	  unit is operating in the European or other 220+V region.  This
	  change diagnoses the the problem by checking if the logical maximum
	  values for UPS.Input.Voltage and UPS.Input.ConfigVoltage are
	  consistent with the UPS.Input.HighVoltageTransfer and if not,
	  increases them.  A similar problem was reported for CPS units in
	  the EU region.  - introduces #defines for all standard usages in
	  power system and battery device pages. - moves cps-hid.c
	  FindReport() to hidparser.c as FindObject_with_ID_Node(). - updates
	  cps-hid.c to account for new defines/function name - adds
	  apc_fix_report_desc() to implement change for APC UPS units

2022-02-11  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: added usbhid-ups "ever-hid" subdriver for NUT v2.7.5
	* docs/man/upsd.conf.txt: docs/man/upsd.conf.txt: document
	  DISABLE_WEAK_SSL
	* NEWS, docs/nut.dict: NEWS: announce "debug_min" options for daemons
	  in NUT v2.7.5
	* NEWS: NEWS: announce fore-/back-grounding options for daemons in
	  NUT v2.7.5
	* docs/man/upsd.conf.txt: docs/man/upsd.conf.txt: document optional
	  "DEBUG_MIN" setting
	* conf/upsd.conf.sample: conf/upsd.conf.sample: document optional
	  "DEBUG_MIN" setting
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: document
	  optional "DEBUG_MIN" setting
	* conf/ups.conf.sample: conf/ups.conf.sample: document optional
	  "debug_min" setting
	* docs/man/upsmon.conf.txt: docs/man/upsmon.conf.txt: document
	  optional "DEBUG_MIN" setting
	* docs/man/ups.conf.txt: docs/man/ups.conf.txt: document optional
	  "debug_min" setting
	* server/conf.c, server/conf.h, server/upsd.c: server/upsd.c, conf.c:
	  support "debug_min" from upsd.conf
	* clients/upsmon.c: clients/upsmon.c: support "debug_min" from
	  upsmon.conf
	* drivers/main.c: drivers/main.c: comment typo fixes
	* docs/man/upslog.txt: docs/man/upslog.txt: fix typo "upsmon" =>
	  "upslog"
	* clients/upslog.c: clients/upslog.c: align -F/-B options with
	  drivers/main.c
	* scripts/systemd/nut-monitor.service.in: scripts/systemd/nut-
	  monitor.service.in: with daemon not backgrounding, "Type=forking"
	  no longer applies
	* docs/man/upsd.txt: docs/man/upsd.txt: document -F/-B for fore/back-
	  ground enforcement, and that -D only defaults to foregrounding now
	  (can be overridden)
	* server/upsd.c: server/upsd.c: align -F/-B options with
	  drivers/main.c
	* docs/man/upsmon.txt: docs/man/upsmon.txt: document -F/-B for
	  fore/back-ground enforcement, and that -D only defaults to
	  foregrounding now (can be overridden)
	* clients/upsmon.c: clients/upsmon.c: align -F/-B options with
	  drivers/main.c
	* docs/man/nutupsdrv.txt: docs/man/nutupsdrv.txt: document -F/-B for
	  fore/back-ground enforcement, and that -D/-d only default to
	  foregrounding now (can be overridden)
	* drivers/main.c: drivers/main.c: update comments

2019-03-19  Jim Klimov <jim@jimklimov.com>

	* drivers/main.c: drivers/main.c : rearrange handling of configured
	  nut_debug_level_global vs nut_debug_level_driver vs ultimately used
	  nut_debug_level
	* drivers/main.c: driver/main.c : separate toggles for driver
	  debugging and backgrounding

2019-03-18  Jim Klimov <jim@jimklimov.com>

	* drivers/main.c: drivers/main.c : allow to configure debug_min=NUM
	  to ease service debugging

2022-02-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c, drivers/adelsystem_cbi.h: coding style
	  changes

2022-02-10  Jim Klimov <jim@jimklimov.com>

	* .github/pull_request_template.md: .github/pull_request_template.md:
	  remind to update recipes for new man pages

2022-02-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c: fix parameter hiding global variable

2022-02-10  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: avoid noise about pkg-config not
	  finding (lib)systemd.pc on systems where it is not installed
	* configure.ac: configure.ac: default to detection of
	  systemdsystemunitdir (and systemdshutdowndir) - "auto" is not a
	  final option
	* configure.ac, docs/configure.txt: configure.ac: default to
	  detection of systemdsystemunitdir (and systemdshutdowndir), non-
	  fatal if not found
	* configure.ac: configure.ac: fall back from pkg-config queries for
	  "systemd" to try also "libsystemd" - fix calling "test"

2022-02-10  Nick Geoghegan <nick@geoghegan.me>

	* drivers/riello_usb.c: Fixes formatting in riello_usb
	* drivers/riello_ser.c: Updates riello_ser to version 0.07

2022-02-10  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: fall back from pkg-config queries for
	  "systemd" to try also "libsystemd"
	* docs/man/Makefile.am: docs/man/Makefile.am: build and install
	  nutdrv_siemens_sitop man pages

2022-02-09  Nick Geoghegan <nick@geoghegan.me>

	* drivers/riello_usb.c: Fixes 530

2022-02-09  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  rename non-standard dstate variables to "experimental.*" namespace
	  Closes: NUT issue #1045
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  fix "ups.delay.return" => "ups.delay.start"
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  whitespace fixes (some long lines)
	* docs/packager-guide.txt: docs/packager-guide.txt: update for nut-
	  linux-i2c and nut-macosx-ups platform-dependent package groups
	* docs/packager-guide.txt: docs/packager-guide.txt: fix title for
	  pkg-nut-modbus
	* drivers/ever-hid.c: drivers/ever-hid.c: tag non-standard NUT
	  variable/command names as "experimental.*" to help identify lacking
	  mappings and rename some into standard data points
	* drivers/ever-hid.c, drivers/ever-hid.h: drivers/ever-hid.{c,h}:
	  update (C) heading
	* drivers/ever-hid.c: drivers/ever-hid.c: print unsigned int as %u
	* drivers/ever-hid.c: drivers/ever-hid.c: mark
	  NUT_UNUSED_VARIABLE(double value) where appropriate
	* drivers/ever-hid.c: drivers/ever-hid.c: use complete struct
	  initializers for info_lkp_t tables; use sentinels; mark static
	* drivers/ever-hid.c: drivers/ever-hid.c: ever_alarms_fun(),
	  ever_workmode_fun(): define "workmode" on top of function
	* drivers/ever-hid.c: drivers/ever-hid.c: fix switch/case whitespaces
	* drivers/ever-hid.c: drivers/ever-hid.c: fix trailing whitespaces
	* drivers/ever-hid.c: drivers/ever-hid.c: wrap some long lines for
	  readability
	* drivers/ever-hid.c: drivers/ever-hid.c: adjust to upstream changes:
	  config.h goes first, PID/VID are unsigned, got a fix_report_desc()
	  default
	* drivers/everups.c: drivers/everups.c: whitespace fixes; clarify
	  this is a serial driver (as opposed to ever-hid.c for USB devices)

2022-02-08  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.h: check ifndef READALL_REGS
	* drivers/adelsystem_cbi.c: minor fix in upsdrv_updateinfo
	* drivers/adelsystem_cbi.c, drivers/adelsystem_cbi.h: fix warning for
	  initializing structure with flexible array member

2022-02-08  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: error out for unhandled --with-
	  drivers=xxx names
	* configure.ac: configure.ac: improve handling of platform-dependent
	  (linux-i2c, macosx) drivers - do not default to require them
	  everywhere
	* configure.ac: configure.ac: move --with-drivers=... handling to
	  before --with-all, and consult drivers/Makefile.am for list names
	  to require certain dependencies
	* drivers/Makefile.am: drivers/Makefile.am: parameterize
	  POWERMAN_DRIVERLIST and IPMI_DRIVERLIST like others
	* configure.ac: configure.ac: move "--with-drivers=name[,name...]"
	  handling to before we check for third-party dependencies
	* clients/upssched.c: clients/upssched.c: sendcmd(): rectify
	  enclen/buflen sanity checks and usage
	* clients/upssched.c: clients/upssched.c: whitespace and comment
	  fixes

2022-02-07  Dimitris Economou <dimitris.s.economou@gmail.com>

	* clients/upssched.c: fix code alignemnt, casting sizeof with ssize_t

2022-02-07  Jim Klimov <jim@jimklimov.com>

	* scripts/subdriver/gen-usbhid-subdriver.sh: gen-usbhid-subdriver.sh:
	  suggest "fix_report_desc" in subdriver_t (follow-up to PR #1245)

2022-02-06  Jim Klimov <jim@jimklimov.com>

	* docs/packager-guide.txt: docs/packager-guide.txt: mention ipmi and
	  modbus drivers as separate packaging goals

2022-02-06  Dimitris Economou <dimitris.s.economou@gmail.com>

	* clients/upssched.c: check zero bytes read from O_NDELAY socket
	* clients/upssched.c: fix enc size write on pipeifd, fix parent
	  select on child's pipefd
	* drivers/Makefile.am: adelsystem_cbi header filename fix

2022-02-05  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict, docs/support.txt: docs/support.txt: detail abot
	  GitHub issues and PRs, and IRC channel
	* drivers/al175.c, drivers/apc-ats-mib.c, drivers/apc-hid.c,
	  drivers/apc-mib.c, drivers/apc-pdu-mib.c, drivers/apcsmart-old.c,
	  drivers/apcsmart.h, drivers/apcupsd-ups.c, drivers/arduino-hid.c,
	  drivers/asem.c, drivers/baytech-mib.c, drivers/bcmxcp.c,
	  drivers/bcmxcp_ser.c, drivers/bcmxcp_usb.c, drivers/belkin-hid.c,
	  drivers/belkin.c, drivers/belkinunv.c, drivers/bestfcom.c,
	  drivers/bestfortress.c, drivers/bestpower-mib.c,
	  drivers/bestuferrups.c, drivers/bestups.c, drivers/blazer_ser.c,
	  drivers/blazer_usb.c, drivers/clone-outlet.c, drivers/clone.c,
	  drivers/compaq-mib.c, drivers/cps-hid.c, drivers/cyberpower-mib.c,
	  drivers/delta_ups-hid.c, drivers/delta_ups-mib.c, drivers/dummy-
	  ups.c, drivers/eaton-ats16-nm2-mib.c, drivers/eaton-ats16-nmc-
	  mib.c, drivers/eaton-ats30-mib.c, drivers/eaton-pdu-genesis2-mib.c,
	  drivers/eaton-pdu-marlin-mib.c, drivers/eaton-pdu-pulizzi-mib.c,
	  drivers/eaton-pdu-revelation-mib.c, drivers/emerson-avocent-pdu-
	  mib.c, drivers/etapro.c, drivers/everups.c, drivers/explore-hid.c,
	  drivers/gamatronic.c, drivers/generic_modbus.c,
	  drivers/genericups.c, drivers/hpe-pdu-mib.c, drivers/huawei-mib.c,
	  drivers/huawei-ups2000.c, drivers/idowell-hid.c, drivers/ietf-
	  mib.c, drivers/isbmex.c, drivers/ivtscd.c, drivers/legrand-hid.c,
	  drivers/libshut.c, drivers/libusb0.c, drivers/libusb1.c,
	  drivers/liebert-esp2.c, drivers/liebert-hid.c, drivers/liebert.c,
	  drivers/macosx-ups.c, drivers/masterguard.c, drivers/metasys.c,
	  drivers/mge-hid.c, drivers/mge-mib.c, drivers/mge-utalk.c,
	  drivers/microdowell.c, drivers/microsol-apc.c, drivers/netvision-
	  mib.c, drivers/netxml-ups.c, drivers/nut-ipmipsu.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/nutdrv_siemens_sitop.c, drivers/oneac.c, drivers/openups-
	  hid.c, drivers/optiups.c, drivers/phoenixcontact_modbus.c,
	  drivers/pijuice.c, drivers/powercom-hid.c, drivers/powercom.c,
	  drivers/powerman-pdu.c, drivers/powerpanel.c, drivers/powervar-
	  hid.c, drivers/powerware-mib.c, drivers/raritan-pdu-mib.c,
	  drivers/raritan-px2-mib.c, drivers/rhino.c, drivers/richcomm_usb.c,
	  drivers/riello_ser.c, drivers/riello_usb.c, drivers/safenet.c,
	  drivers/salicru-hid.c, drivers/skel.c, drivers/snmp-ups.c,
	  drivers/solis.c, drivers/tripplite-hid.c, drivers/tripplite.c,
	  drivers/tripplite_usb.c, drivers/tripplitesu.c, drivers/upscode2.c,
	  drivers/usbhid-ups.c, drivers/victronups.c, drivers/xppc-mib.c:
	  drivers: bump versions for all drivers, they could have been
	  refactored during fightwarn (so might add regressions) without
	  regard to versioning
	* UPGRADING: NEWS: plea to package maintainers to share their
	  customizations into common uptream
	* docs/documentation.txt, docs/nut.dict: documentation.txt: add a
	  blog by James Ridgway
	* docs/documentation.txt: documentation.txt: update with a link to
	  video by Techno Tim
	* docs/documentation.txt: developers.txt: "trac" is AWOL, update the
	  link to github wiki copy
	* docs/developers.txt: developers.txt: "alioth" is AWOL, update the
	  text
	* docs/download.txt: download.txt: "trac" and "alioth" are AWOL,
	  update the links

2022-02-05  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c: apply Jim's modbus changes on PR #1239

2022-01-23  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: fix CI_FAILFAST to abort after failed
	  configure scripts

2022-01-27  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: Revert "drivers/snmp-ups.c: replace
	  strcmp("short string") with strncmp() (clang-3.4 warns about array
	  out of bounds)"  This reverts commit
	  d2f7193af42e987f7948e072a963dc7bb1e25dc1.  Currently the configure
	  script should properly avoid the built-in strcmp() versions which
	  upset current build compiler. Using the range-limited strncmp() has
	  a downside of matching start-of-string.
	* drivers/snmp-ups.c: Revert "drivers/snmp-ups.c: fix strncmp()
	  limits for "v1" and "v3" checks (copy-pasting typo)"  This reverts
	  commit d0d02d3a70c6544c8ea7868dd63738595f2ae657.  Currently the
	  configure script should properly avoid the built-in strcmp()
	  versions which upset current build compiler. Using the range-
	  limited strncmp() has a downside of matching start-of-string.
	* clients/upsclient.c, clients/upslog.c, clients/upsmon.c,
	  clients/upsrw.c, clients/upssched.c, clients/upsset.c,
	  common/state.c, common/upsconf.c, docs/developers.txt,
	  docs/nut.dict, drivers/apcsmart-old.c, drivers/apcsmart.c,
	  drivers/apcupsd-ups.c, drivers/belkin.c, drivers/belkinunv.c,
	  drivers/bestups.c, drivers/clone-outlet.c, drivers/clone.c,
	  drivers/dstate.c, drivers/gamatronic.c, drivers/huawei-ups2000.c,
	  drivers/main.c, drivers/masterguard.c, drivers/mge-utalk.c,
	  drivers/mge-xml.c, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_blazer-common.c,
	  drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-
	  qs.c, drivers/nutdrv_qx_voltronic.c, drivers/oneac.c,
	  drivers/powercom.c, drivers/powerman-pdu.c, drivers/powerp-txt.c,
	  drivers/snmp-ups.c, drivers/tripplite_usb.c, drivers/upscode2.c,
	  drivers/victronups.c, server/conf.c, server/netget.c,
	  server/netlist.c, server/netset.c, server/user.c,
	  tests/cpputest.cpp, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_snmp.c: Revert "Replace strcmp() and strcasecmp() use-
	  cases for short fixed string args by strncmp() and strncasecmp()
	  respectively"  This reverts commit
	  a0d5ad57956ebcb5878744acb7657e1356ba0ea8.  Currently the configure
	  script should properly avoid the built-in strcmp() versions which
	  upset current build compiler. Using the range-limited strncmp() has
	  a downside of matching start-of-string.
	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: Revert
	  "tools/nut-scanner/scan_snmp.c, drivers/snmp-ups.c: strcmp()
	  shorter "SHA" and "AES" and check this is all of the string length"
	  This reverts commit 57182d51b2954e6b7bb5199f658f38a89ce93648.
	  Currently the configure script should properly avoid the built-in
	  strcmp() versions which upset current build compiler. Using the
	  range-limited strncmp() has a downside of matching start-of-string.

2022-01-23  Jim Klimov <jim@jimklimov.com>

	* NEWS, UPGRADING: NEWS, UPGRADING: snmp-ups.h flags (bit-mask
	  macros) changed for NUT v2.7.5
	* drivers/snmp-ups.h: drivers/snmp-ups.h: mib2nut mappings with
	  "zero" flag value are not illegal

2022-01-18  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: mib2nut mappings with
	  "zero" flag value are not illegal  Do not yell about them like it's
	  a bug, after all.

2022-01-23  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: redefine bit-flags macros
	  so they do not overlap  (and update some helper-masking macros)
	  follows up on issue from PR #1177 and aligns with ultimately DMF
	  (42ity fork) tested changes to help merge that later with less
	  effort

2021-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: update mask for
	  SU_TYPE_DAISY() and comments for it and SU_DAISY

2021-11-13  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: report if an snmp_info[]
	  entry flag was not defined (is 0)
	* drivers/snmp-ups.h: drivers/snmp-ups.h: redefine bit-flags macros
	  so they do not overlap (and some helper-masking macros) [follow up
	  on issue from PR #1177]

2022-01-22  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: drop chapters for "PLANNED NEWS" for releases after
	  v2.7.5
	* UPGRADING: UPGRADING: highlight libusb-1.0 in NUT v2.7.5

2022-01-21  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  "libssl-dev" name is more popular nowadays than "openssl-dev"
	  (Debian and family)
	* docs/nut.dict: docs/nut.dict: update for Armac subdriver NEWS
	* data/driver.list.in: data/driver.list.in: add PiJuice HAT (big) and
	  pHAT (Zero)

2022-01-20  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: tools/nut-
	  scanner/scan_snmp.c, drivers/snmp-ups.c: strcmp() shorter "SHA" and
	  "AES" and check this is all of the string length  Alternative: move
	  matching to end of stack
	* NEWS: NEWS: prepare for nutdrv-qx armac merge in 2.7.5 timeline
	* NEWS: NEWS: added usbhid-ups fix_report_desc() for NUT v2.7.5
	* NEWS: NEWS: added powercom "nobt" option for NUT v2.7.5
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command():
	  accomodate "usb_ctrl_charbuf" and formatting changes for libusb-1.0
	  support
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command(): mark as
	  static method
	* drivers/nutdrv_qx_ablerex.c: drivers/nutdrv_qx_ablerex.c:
	  ablerex_process_status_bits(): mark as static method
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: ablerex_command():
	  accomodate "usb_ctrl_charbuf" and formatting changes for libusb-1.0
	  support
	* ci_build.sh: ci_build.sh: make distcheck (pun intended) less noisy
	* ci_build.sh: ci_build.sh: comment a suggestion how to use
	  BUILD_TYPE=fightwarn typically
	* ci_build.sh: ci_build.sh: make distcheck (pun intended) less noisy
	* ci_build.sh: ci_build.sh: comment a suggestion how to use
	  BUILD_TYPE=fightwarn typically

2022-01-20  Jim Klimov <jimklimov@gmail.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command(): use
	  nut_usb_strerror(ret)  Match updated libusb-1.0/0.1 API in NUT
	  master
	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Fix nut_usb_strerror(ret)
	  for new libusb-1.0/0.1 support in master branch

2022-01-19  Jim Klimov <jimklimov@gmail.com>

	* drivers/legrand-hid.c: Update legrand-hid.c  Initialize
	  "fix_report_desc", this file appeared from another PR merged before
	  #1245

2022-01-19  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: provision check_gitignore() calls for DMF
	  branch build products
	* ci_build.sh: ci_build.sh: check_gitignore(): wrap long lines
	* ci_build.sh: ci_build.sh: check_gitignore(): add a FILE_GLOB
	  support
	* ci_build.sh: ci_build.sh: optional_dist_clean_check(): copypasta
	  error, GIT_ARGS not needed in this one
	* ci_build.sh: ci_build.sh: fix "MAKE distclean" operations back to
	  not-quiet, they look weird as a half-muted wall of text
	* ci_build.sh: ci_build.sh: fix use of git status $GIT_ARGS
	  consistently
	* drivers/snmp-ups.c: drivers/snmp-ups.c: match_sysoid(): test for
	  NULL mib2nut[i]->snmp_info (and skip if so)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): imply that
	  skipped value is not a "valid" name in the mapping table (name may
	  be known, but with no snmp_info attached)

2022-01-18  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: handle not-loaded snmp_info
	  without segfaulting
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): better
	  tracing of mib_name comparisons
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): test for
	  NULL mib2nut[i]->snmp_info (and skip if so) before accounting
	  mibSeen=TRUE and trying to match_model_OID()

2022-01-18  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: delete duplicates after
	  rebase
	* drivers/{adele_cbi.c => adelsystem_cbi.c}, drivers/{adele_cbi.h =>
	  adelsystem_cbi.h}: rename after rebase
	* drivers/{adelsystem_cbi.c => adele_cbi.c},
	  drivers/{adelsystem_cbi.h => adele_cbi.h}: rename for rebase

2022-01-13  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c: try to reconnect on IVALID DATA and
	  INVALID CRC from read_all_regs
	* drivers/adelsystem_cbi.c: try to reconnect on INVALID DATA and
	  INVALID CRC errors
	* drivers/adele_cbi.c, drivers/adele_cbi.h,
	  drivers/adelsystems_cbi.c, drivers/adelsystems_cbi.h: delete
	  renamed driver files
	* drivers/Makefile.am, drivers/adelsystem_cbi.c,
	  drivers/adelsystem_cbi.h: filename fixes
	* drivers/Makefile.am, drivers/adelsystems_cbi.c,
	  drivers/adelsystems_cbi.h: adele changed to adelsystems
	* drivers/adele_cbi.c, drivers/adele_cbi.h: macro name changes
	* drivers/adele_cbi.c, drivers/adele_cbi.h: minor bug fixes
	* drivers/adele_cbi.h: modify regs_data memory, devreg enum
	  rearrangement

2022-01-12  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: some fixes in
	  read_all_regs approach
	* drivers/adele_cbi.c, drivers/adele_cbi.h: read_all_regs aproach
	  integrated

2022-01-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: ghost alarms bug fix,
	  other bug fixes

2022-01-10  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: first testing release

2022-01-09  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: alrm_t, alrm_ar_t data
	  structures, construction of upsdrv_updateinfo in progress

2022-01-08  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: structure device data,
	  code get_dev_state, in progress

2022-01-07  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.h: register status values and masks added

2022-01-06  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: under construction

2022-01-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: ghost alarms bug fix,
	  other bug fixes

2022-01-10  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: first testing release

2022-01-09  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: alrm_t, alrm_ar_t data
	  structures, construction of upsdrv_updateinfo in progress

2022-01-08  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: structure device data,
	  code get_dev_state, in progress

2022-01-07  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.h: register status values and masks added

2022-01-06  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/Makefile.am: Makefile.am modifications
	* drivers/adele_cbi.c, drivers/adele_cbi.h: under construction

2022-01-18  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/{adelsystem_cbi.c => adele_cbi.c},
	  drivers/{adelsystem_cbi.h => adele_cbi.h}: rename for rebase

2022-01-18  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.h: drivers/usbhid-ups.h: rename pDesc arg to
	  match wording in usbhid-ups.c
	* drivers/hidparser.c, drivers/hidparser.h: drivers/hidparser.{c,h}:
	  rename pDesc arg/var to avoid shadowing a global variable  Pre-
	  emptively: `extern pDesc` is defined in libhid.h which does not
	  seem to be used in/along-with hidparser.{c,h} currently - but this
	  collision may happen later (especially with code-copying around).
	* drivers/cps-hid.c: drivers/cps-hid.c: clean up trailing whitespaces
	* drivers/cps-hid.c: drivers/cps-hid.c: FindReport()
	  cps_fix_report_desc(): rename pDesc arg to avoid shadowing a global
	  variable
	* drivers/cps-hid.c: drivers/cps-hid.c: mark non-exported
	  FindReport() as static
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: enhance
	  NUT_CHECK_COMPILE_FLAG() to run the whole toolchain for "build and
	  run" when checking CLI option support
	* ci_build.sh: ci_build.sh: build_to_only_catch_errors_target():
	  CI_PARMAKE_VERBOSITY=silent should not hide warnings
	* ci_build.sh: ci_build.sh: do not silent-make initial clean-up (it
	  is chatty anyway, so let us see the dirs processed)
	* ci_build.sh: ci_build.sh: comment verbosity (non-)tweaks for builds
	  without a BUILD_TYPE
	* ci_build.sh: ci_build.sh: report around initial clean-up for
	  clearer log reading
	* ci_build.sh: ci_build.sh: refactor with check_gitignore()
	* ci_build.sh: ci_build.sh: refactor ccache_stats()
	* ci_build.sh: ci_build.sh: refactor make-verbosity settings and
	  adjust some for default builds to store less log

2022-01-18  Jim Klimov <jimklimov+nut@gmail.com>

	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: avoid
	  SIGSEGV in libusb-1.0 when running as non-root and device fails to
	  open (e.g. perms error)

2022-01-17  Jim Klimov <jimklimov+nut@gmail.com>

	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  report in usage() if "library not detected" for a scan option

2022-01-17  Jim Klimov <jim@jimklimov.com>

	* drivers/generic_modbus.c: drivers/generic_modbus.c: address
	  -Wmissing-field-initializers complaints for timeval with timeouts
	  (memset to 0 instead)
	* drivers/generic_modbus.c: drivers/generic_modbus.c: address
	  -Wstrict-prototypes complaints
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: raise the bar for
	  code quality non-regression, to fail on any (new) warnings in
	  master branch and PRs to it
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: shut back the
	  cppcheck-by-default
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: do not allow to
	  disable delayedIssueAnalysis on "stable branches"
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: enable cppcheck
	  slowBuild stages generally, not just for "fightwarn" branches

2022-01-16  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: adjust test structure for both built-in
	  ntohl/htonl and string built-ins (using explicit -Werror -Wno-...
	  checks)
	* configure.ac: configure.ac: adjust test structure for built-in
	  ntohl/htonl to be similar to that for string built-ins (using
	  explicit -Werror)
	* ci_build.sh: ci_build.sh: do not lose original LDFLAGS

2022-01-15  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: tweak LIBLTDL_CFLAGS same as
	  LIBNETSNMP_CFLAGS for -Wno-shadow if needed for string methods or
	  htonl() etc  In some builds of the NUT CI farm dynamatrix (possibly
	  ones without SNMP support), the nutscan-ip.c complains about
	  "declaration shadows a local variable" -- investigation of which
	  leads into the macros expanded for common method names on those
	  systems and/or compiler toolkit versions.  This PR hopes to avoid
	  that situation more extensively.

2022-01-14  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: treat DISABLE_MIB_LOADING
	  more safely

2022-01-14  Jim Klimov <jimklimov+nut@gmail.com>

	* tests/cpputest.cpp, tests/example.cpp, tests/nutclienttest.cpp:
	  tests/*.cpp: mark overridden class methods as such
	* clients/nutclient.h, clients/nutclientmem.h: clients/nutclient.h +
	  nutclientmem.h: mark overridden class methods as such

2022-01-13  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: adjust test for built-in string
	  functions (problematic on clang-3.4) to see any warnings and
	  specifically for unreachable code there
	* ci_build.sh: ci_build.sh: relay more build-influencing envvars in
	  the (Jenkins-logged) printout
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: fix the
	  range-check and message/comment it better
	* drivers/asem.c: drivers/asem.c: macro ACCESS_DEVICE() ends with a
	  brace; we HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_EXTRA_SEMI_STMT to
	  keep the useless trailing ";" for readability
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: add
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_EXTRA_SEMI_STMT(_BESIDEFUNC)
	* drivers/asem.c: drivers/asem.c: declare upsdrv_shutdown() as
	  noreturn
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: avoid including usb-
	  common.h twice

2022-01-13  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adelsystem_cbi.c: try to reconnect on IVALID DATA and
	  INVALID CRC from read_all_regs
	* drivers/adelsystem_cbi.c: try to reconnect on INVALID DATA and
	  INVALID CRC errors

2022-01-13  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: ask CLANG to reject unknown
	  pragmas when checking for them
	* common/common.c: common/common.c: check for
	  HAVE_PRAGMA_CLANG_DIAGNOSTIC_IGNORED_UNREACHABLE_CODE_RETURN
	  support before use
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: test specifically for HAVE_
	  PRAGMA_CLANG_DIAGNOSTIC_IGNORED_UNREACHABLE_CODE_RETURN(_BESIDEFUNC
	  ) support

2022-01-13  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h,
	  drivers/adelsystems_cbi.c, drivers/adelsystems_cbi.h: delete
	  renamed driver files
	* drivers/Makefile.am, drivers/adelsystem_cbi.c,
	  drivers/adelsystem_cbi.h: filename fixes
	* drivers/Makefile.am, drivers/adelsystems_cbi.c,
	  drivers/adelsystems_cbi.h: adele changed to adelsystems
	* drivers/adele_cbi.c, drivers/adele_cbi.h: macro name changes
	* drivers/adele_cbi.c, drivers/adele_cbi.h: minor bug fixes
	* drivers/adele_cbi.h: modify regs_data memory, devreg enum
	  rearrangement

2022-01-12  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: some fixes in
	  read_all_regs approach
	* drivers/adele_cbi.c, drivers/adele_cbi.h: read_all_regs aproach
	  integrated

2022-01-12  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: set default
	  C/C++ standards to GNU dialects for GCC/CLANG
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: set default
	  C/C++ standards to avoid C90-non-compliance warnings noise (on
	  compilers that can do better than that)
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: fix a test
	  from shell to autoscript
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  only evaluate if NUT_HAVE_LIBNETSNMP_* when we build WITH_SNMP
	* common/common.c: common/common.c: use
	  HAVE_PRAGMAS_FOR_GCC_DIAGNOSTIC_IGNORED_UNREACHABLE_CODE_RETURN
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: add HAVE_PRAGMA_GCC_DIAGNOS
	  TIC_IGNORED_UNREACHABLE_CODE_RETURN(_BESIDEFUNC)
	* configure.ac, m4/nut_compiler_family.m4: m4/nut_compiler_family.m4
	  + configure.ac: refactor NUT_COMPILER_FAMILY_FLAGS_DEFAULT_STANDARD
	  as a separate method to apply just before we set up warning-level
	  support
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  update dependency package naming for libusb-1.0 on Debian family
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: set default
	  C/C++ standards to GNU dialects for GCC/CLANG
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: set default
	  C/C++ standards to avoid C90-non-compliance warnings noise (on
	  compilers that can do better than that)
	* ci_build.sh: ci_build.sh: comment why ./configure is not without
	  args

2022-01-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: ghost alarms bug fix,
	  other bug fixes

2022-01-10  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: first testing release

2022-01-09  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: alrm_t, alrm_ar_t data
	  structures, construction of upsdrv_updateinfo in progress

2022-01-08  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: structure device data,
	  code get_dev_state, in progress

2022-01-07  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.h: register status values and masks added

2022-01-06  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/Makefile.am: Makefile.am modifications
	* drivers/adele_cbi.c, drivers/adele_cbi.h: under construction

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* drivers/generic_modbus.c: drivers/generic_modbus.{c,h}: fix
	  whitespace style  (original fix from master branch)

2022-01-12  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/generic_modbus.c: drivers/generic_modbus.c: fix whitespace
	  style (in PR-1239)

2022-01-12  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/mge-xml.c: Eaton NMC: fix the non publication of real/power
	  with 3ph  power and realpower for 3ph Lx were not publishing values
	  when they were 0

2022-01-11  Dave Williams <dave@opensourcesolutions.co.uk>

	* drivers/cps-hid.c: New HID fix strategy after consultation with CPS
	  It appears both input and output LogMin and LogMax values are
	  incorrect as the rated voltage (for EU models) is 170v to 270v
	  which is outside the logical limits reported by the HID.  The fix
	  checks for the error (loosely) and then applies reasonable values
	  (0v and 511v) to allow the actual input and output voltages to be
	  reported rather than be constrained to the limits.

2022-01-11  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/arduino-hid.c, drivers/delta_ups-hid.c,
	  drivers/hidparser.c, drivers/idowell-hid.c, drivers/powervar-hid.c,
	  drivers/salicru-hid.c: drivers/hidparser.c + *-hid.c: include
	  "config.h" first

2022-01-11  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Updated for PR
	  https://github.com/networkupstools/nut/pull/1256

2022-01-11  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/generic_modbus.c: drivers/generic_modbus.c: handle the two
	  APIs for libmodbus timeout setting
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: in tests for
	  API, the AC_DEFINE must be used with exact macro names (not
	  m4/shell variables)
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: in tests for
	  API, clarify if old API (timeval) can be used with variables from
	  new API (uint32) set into the struct
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: in tests for
	  API, "new/old" comments were confused
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: in tests for
	  API, initialize modbus_t *ctx differently
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: test actively
	  for the modbus timeout API (count and type of args used)
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: convert a
	  code block from plain shell to autoscript
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: test for
	  presence of modbus_set_byte_timeout() and
	  modbus_set_response_timeout()
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: detect support for
	  (ignoring) "-Wsign-conversion"
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: add guards to call
	  AX_C_PRINTF_STRING_NULL and AX_C_PRAGMAS logic only once
	* drivers/generic_modbus.c: drivers/generic_modbus.c: bump
	  DRIVER_VERSION for feature change (connection timeout handling)

2022-01-10  Ablerexsoftware <Ablerex.software@ablerex.com.tw>

	* data/driver.list.in: update the driver.list.in

2022-01-11  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: ghost alarms bug fix,
	  other bug fixes

2022-01-10  Jim Klimov <jimklimov@gmail.com>

	* docs/man/powercom.txt: Update powercom.txt  Sentence restructure

2022-01-10  Jim Klimov <jim@jimklimov.com>

	* .github/pull_request_template.md: pull_request_template.md: update
	  and reshuffle check-list items
	* .../{PULL_REQUEST_TEMPLATE/nut-driver-PR.md =>
	  pull_request_template.md}: Move fancy-named PR template to plain
	  .github/pull_request_template.md
	* drivers/salicru-hid.c, scripts/upower/95-upower-hid.rules:
	  drivers/salicru-hid.c: add known compatibility for Salicru SLC TWIN
	  (PRO2, PRO3, RT3) per reports in issue #1142
	* data/driver.list.in: data/driver.list.in: add known compatibility
	  for Salicru TWIN (PRO2, PRO3, RT3) per reports in issues #450 and
	  #1142
	* .github/PULL_REQUEST_TEMPLATE/nut-driver-PR.md: Add
	  .github/PULL_REQUEST_TEMPLATE/nut-driver-PR.md template

2022-01-10  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: first testing release

2022-01-10  Jim Klimov <jim@jimklimov.com>

	* data/driver.list.in: data/driver.list.in: fix English typos in
	  comment
	* docs/developers.txt: docs/developers.txt: remind to update
	  docs/acknowledgements.txt when adding vendor-backed support
	* docs/man/usbhid-ups.txt: docs/man/usbhid-ups.txt: fix reference to
	  data/driver.list (typo in filename)

2022-01-09  Rouben Tchakhmakhtchian <rouben@rouben.net>

	* docs/man/powercom.txt, drivers/powercom.c: Powercom driver
	  (drivers/powercom.c) version bump from 0.17 to 0.18: * Implement
	  configuration flag "nobt" to skip battery test during
	  initialization * Cleanup old code to use testvar() for config
	  parameter checks in upsdrv_initups() * Add nobt flag to sample
	  config file in built-in doc Powercom driver man page
	  (docs/man/powercom.txt) update to explain nobt flag

2022-01-09  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: alrm_t, alrm_ar_t data
	  structures, construction of upsdrv_updateinfo in progress

2022-01-08  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.c, drivers/adele_cbi.h: structure device data,
	  code get_dev_state, in progress

2022-01-07  Jim Klimov <jimklimov+nut@gmail.com>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: be sure to have
	  PATH_MAX defined (for usb.h that did not bother by itself)
	* drivers/usb-common.h: drivers/usb-common.h: be sure to have
	  PATH_MAX defined (for usb.h that did not bother by itself)

2022-01-07  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/adele_cbi.h: register status values and masks added

2022-01-06  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Revert "Jenkinsfile-dynamatrix: be sure to
	  reset slowBuild configs over dynacfgBase"  This reverts commit
	  18cf19ebc7e01f30c3d84c7b3b8f69e961429ebb as the "design flaw" which
	  that change worked around should now be (hopefully) fixed in the
	  jenkins-fynamatrix library itselg.

2022-01-06  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/Makefile.am: Makefile.am modifications
	* drivers/adele_cbi.c, drivers/adele_cbi.h: under construction

2022-01-05  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: fix
	  dynamatrixAxesCommonEnvCartesian cases to group the variables we
	  apply as one bunch, not as several separate hits
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: define
	  dynacfgPipeline.excludeCombos_DEFAULT (mismatched ARCHes only)
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  avoid implicit case fallthrough
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: be sure to reset
	  slowBuild configs over dynacfgBase
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: avoid running
	  "cppcheck" several times per host

2022-01-04  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: reinstate
	  excludeCombos for autotools-only builds (fightwarn) to avoid
	  unsupported ARCH-bits mix builds

2022-01-02  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: fix "Default
	  autotools driven build with default warning levels (gnu99/gnu++11)"
	  dynamatrixAxesVirtualLabelsMap mergeMode from "merge" to "replace"
	  (want to only build listed scenarios, not everything possible in
	  the matrix)

2021-12-30  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: avoid using
	  undefined (null) excludeCombos_DEFAULT
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: fix references to
	  excludeCombos: ... axisCombos_COMPILER_(NOT_)GCC

2022-01-05  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_check_cppcheck.m4: m4/nut_check_cppcheck.m4: relax required
	  tool version for cppcheck*.xml generation
	* Makefile.am: Makefile.am: fix dependencies for cppcheck*.xml
	  generation

2022-01-04  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: comment and code alignment fixes

2022-01-03  Jim Klimov <jimklimov+nut@gmail.com>

	* ci_build.sh: ci_build.sh: set DO_CLEAN_CHECK=no for default-
	  tgt:cppcheck or docs-building scenarios by default, so we can
	  get/archive those costly media files
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: set
	  DO_CLEAN_CHECK=no for default-tgt:cppcheck scenarios, so we can get
	  that analysis data

2021-12-30  Jim Klimov <jimklimov+nut@gmail.com>

	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  include config.h first

2021-12-30  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt, docs/nut.dict: docs/developers.txt: update
	  about C89/GNU89 support (with GCC toolkit)
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: separate
	  C89/C90/ANSI builds with GCC (can actually pass strict and GNU
	  modes) and CLANG (more pedantic)
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: typo fix for
	  disableSlowBuildCIBuildExperimentalANSI

2021-12-30  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: do not test
	  for "-fcolor-diagnostics" - redundant for clang, and sometimes
	  toxic for gcc
	* drivers/Makefile.am: drivers/Makefile.am: snmp-ups uses fabsf() so
	  needs libm
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: include
	  config.h first
	* drivers/microsol-apc.c: drivers/microsol-apc.c: include config.h
	  first
	* drivers/genericups.c: drivers/genericups.c: include config.h first
	* include/nut_stdint.h: include/nut_stdint.h: define SSIZE_MAX if
	  missing
	* drivers/serial.h: drivers/serial.h: pull more includes

2021-12-30  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am: metasys uses fabsf() so
	  needs libm
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix comments to C-style
	* drivers/powercom.c: drivers/powercom.c: fix comments to C-style
	* drivers/microdowell.h: drivers/microdowell.h: fix comments to
	  C-style
	* drivers/solis.h: drivers/solis.h: fix comments to C-style
	* drivers/libshut.c: drivers/libshut.c: fix comments to C-style
	* drivers/openups-hid.c: drivers/openups-hid.c: include config.h
	  first
	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix comments to C-style
	* drivers/riello_usb.c: drivers/riello_usb.c: fix comments to C-style
	* drivers/generic_modbus.h: drivers/generic_modbus.h: fix comments to
	  C-style
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix comments to C-style
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  fix comments to C-style
	* tools/nut-scanner/nutscan-init.c: tools/nut-scanner/nutscan-init.c:
	  fix comments to C-style
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: fix comments to C-style
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  comments to C-style
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: fix
	  comments to C-style
	* server/upsd.c: server/upsd.c: fix comments to C-style
	* server/conf.c: server/conf.c: fix comments to C-style
	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix comments to C-style
	* drivers/main.c: drivers/main.c: fix comments to C-style
	* common/upsconf.c: common/upsconf.c: include config.h first
	* common/str.c: common/str.c: fix comments to C-style
	* server/user.c: server/user.c: include config.h first
	* server/desc.c: server/desc.c: include config.h first
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: include config.h first
	* drivers/riello_usb.c: drivers/riello_usb.c: include config.h first
	* drivers/riello_ser.c: drivers/riello_ser.c: include config.h first
	* drivers/rhino.c: drivers/rhino.c: include config.h first
	* drivers/mge-utalk.c: drivers/mge-utalk.c: include config.h first
	* drivers/libhid.c: drivers/libhid.c: include config.h first, and try
	  to get strings.h explicitly
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: include
	  config.h first
	* drivers/dummy-ups.c: drivers/dummy-ups.c: include config.h first
	* drivers/dstate.c: drivers/dstate.c: include config.h first
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: try to include explicitly both of
	  (sys/)signal.h
	* server/upsd.c: server/upsd.c: try to include explicitly both of
	  (sys/)signal.h
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: include config.h first
	* tools/nut-scanner/nutscan-device.c: tools/nut-scanner/nutscan-
	  device.c: include config.h first
	* drivers/mge-xml.c: drivers/mge-xml.c: include config.h first
	* drivers/libshut.c: drivers/libshut.c: include config.h first
	* common/state.c: common/state.c: include config.h first
	* common/str.c: common/str.c: include config.h first, and try to get
	  strings.h explicitly
	* include/common.h: include/common.h: try to include explicitly
	  string(s).h and (sys/)signal.h
	* configure.ac: configure.ac: test more actively for strcasecmp,
	  strncasecmp, strdup and usleep methods that are problematic for
	  strict C99+ builds
	* configure.ac: configure.ac: detect explicitly string(s).h and
	  (sys/)signal.h

2021-12-29  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: zero-init struct in ntohl/htonl
	  warning-tweaks test code

2021-12-29  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: be pragmatic
	  about possibly unreachable error handling in arch-dependent range
	  check
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: mark local
	  vars as static
	* configure.ac: configure.ac: constrain warning-tweaks against macro
	  str*() and ntohl/htonl to LIBNETSNMP_CFLAGS (empirically)
	* configure.ac: configure.ac: detect if compiler (e.g. older
	  clang-3.4) has a problem with built-in/macro variants of system
	  str*() and htonl/ntohl functions at our higher warning levels, and
	  mitigate that
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: rearrange
	  detection order of compiler flags
	* drivers/generic_modbus.c: drivers/generic_modbus.c: quiesce
	  warnings about unreachable-code (default after full enum-case
	  handling) with older clang
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: ignore potentially
	  unreachable code in assert()
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: quiesce warnings about
	  unreachable-code (default after full enum-case handling) with older
	  clang
	* drivers/upscode2.c: drivers/upscode2.c: quiesce warnings about
	  unreachable-code (default after full enum-case handling) with older
	  clang
	* drivers/hidparser.c: drivers/hidparser.c: ignore potentially
	  unreachable code in platforms-dependent range checks
	* drivers/libhid.c: drivers/libhid.c: ignore potentially unreachable
	  code in platforms-dependent range checks
	* drivers/libshut.c: drivers/libshut.c: tell compiler that we do want
	  to treat a char array (managed by comms code) as the aligned
	  pointer to struct
	* drivers/libshut.c: drivers/libshut.c: adjust data_size usage to
	  usb_ctrl_charbufsize typedef - fix pragmas for range-checks
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: quiesce warnings about
	  unreachable-code (default after full enum-case handling) with older
	  clang
	* drivers/genericups.c: drivers/genericups.c: ignore potentially
	  unreachable code in platforms-dependent range checks
	* drivers/bestuferrups.c: drivers/bestuferrups.c: ignore potentially
	  unreachable code in assert(0)
	* drivers/bestfcom.c: drivers/bestfcom.c: ignore potentially
	  unreachable code in assert(0)
	* clients/upsmon.c: clients/upsmon.c: ignore potentially unreachable
	  code in platforms-dependent range checks
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: ignore
	  potentially unreachable code in platforms-dependent range checks
	* tools/nut-scanner/nutscan-init.c: tools/nut-scanner/nutscan-init.c:
	  ignore potentially unreachable code in platforms-dependent range
	  checks
	* server/upsd.c: server/upsd.c: quiesce warnings about unreachable-
	  code (default after full enum-case handling) with older clang
	* configure.ac: configure.ac: update "clang-medium" warnings level
	  with "-Wno-conversion" for older clang releases
	* ci_build.sh: ci_build.sh: introduce CI_FAILFAST for
	  BUILD_TYPE=default-all-errors
	* ci_build.sh: ci_build.sh: use configurable --enable-Wcolor for
	  compiler warnings in default quick build
	* ci_build.sh: ci_build.sh: use configurable --enable-Wcolor for
	  compiler warnings in all BUILD_TYPEs
	* configure.ac, m4/nut_compiler_family.m4: configure.ac +
	  m4/nut_compiler_family.m4: allow configurable --enable-Wcolor for
	  compiler warnings
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: add
	  diagnostics-color support for GCC
	* configure.ac, m4/ax_check_compile_flag.m4,
	  m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: use
	  AX_CHECK_COMPILE_FLAG to detect generic options supported by
	  compilers

2021-12-28  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: pass "-Wno-disabled-macro-expansion" in
	  clang-medium and clang-hard modes, to avoid choking on systems-
	  provided strncmp() etc.
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: pw_comm_setup(): ignore
	  potentially unreachable code in platforms-dependent range checks
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  ignore potentially unreachable code in platforms-dependent range
	  checks
	* common/common.c: common/common.c: get_user_pwent(): ignore
	  "-Wunreachable-code" where we were required to have a return
	* common/common.c: common/common.c: get_max_pid_t(): avoid warnings
	  in C89/C90/ANSI builds *because* we check for LLONG_MAX macro
	* common/common.c: common/common.c: get_max_pid_t(): ignore
	  "-Wunreachable-code"
	* common/common.c: common/common.c: vupslog(): ignore "-Wformat-
	  nonliteral" with older clang too
	* configure.ac: configure.ac: with (older) clang, ignore "unused-
	  arguments" (of clang program)
	* server/upsd.c: server/upsd.c: mainloop(): ignore "-Wcovered-switch-
	  default" with older clang too
	* clients/upsclient.c: clients/upsclient.c: upscli_init(): fix "ret"
	  to "long", to match some versions of SSL_CTX_ctrl() (from
	  openssl/ssl.h e.g. in FreeBSD)
	* drivers/riello_usb.c: drivers/riello_usb.c: riello_command():
	  handle possibly undefined ETIME
	* drivers/blazer_usb.c: drivers/blazer_usb.c: blazer_command():
	  handle possibly undefined ETIME
	* drivers/blazer_usb.c: drivers/blazer_usb.c: phoenix_command():
	  avoid fall-through in a case
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: qx_command(): handle
	  possibly undefined ETIME
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: phoenix_command(): avoid
	  fall-through in a case
	* drivers/mge-hid.c: drivers/mge-hid.c: nominal_output_voltage_fun():
	  explicitly fall-through in a case
	* drivers/libshut.c: drivers/libshut.c: shut_control_msg():
	  explicitly fall-through in a case, and finish the default with a
	  break
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: comment away
	  setting "-isystem ..." common paths early in CFLAGS
	* configure.ac: configure.ac: set "-Wno-system-headers" early in
	  gcc/clang medium and hard warning levels
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: set "-isystem
	  ..." paths early in CFLAGS
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: expel other
	  C89/C90/ANSI builds to only happen if not
	  disableSlowBuildCIBuildExperimentalANSI and only in branches (or
	  PRs to) matching ~/fightwarn.*89.*/ currently
	* configure.ac: configure.ac: try to handle warnings in system
	  headers at our medium and hard levels

2021-12-28  Jim Klimov <jimklimov@gmail.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix_report_desc():
	  avoid shadowing global var with method arg name
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix_report_desc(): mark
	  NUT_UNUSED_VARIABLEs

2021-12-28  Jim Klimov <jim@jimklimov.com>

	* docs/man/nutdrv_qx.txt: docs/man/nutdrv_qx.txt: mention Armac in
	  SUPPORTED HARDWARE section, and wrap long lines there
	* docs/man/nutdrv_qx.txt, docs/nut.dict: docs/man/nutdrv_qx.txt: port
	  notes for "armac" subdriver from source code
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command(): move
	  variable declarations to top of scope
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command(): fix
	  varied int types to size_t, and move equation sides around to avoid
	  signedness
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: armac_command(): zero out
	  whole tmpbuf[], not one element
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: normalize whitespace for
	  "armac" code addition
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: add (C) for "armac" code
	  addition

2021-12-25  Tomasz Fortuna <bla@thera.be>

	* data/driver.list.in, docs/man/nutdrv_qx.txt, docs/nut.dict,
	  drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: add support for Armac UPS
	  (or maybe other richcomm_usb like)  Based on Armac R/2000I/PSW, but
	  should support other UPSes that work with "PowerManagerII" software
	  from Richcomm Technologies from around 2004-2005.

2021-12-28  Jim Klimov <jim@jimklimov.com>

	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: add a troubleshooting section, with entry for
	  cgroupsv1-only guests on a cgroupsv2-only host
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  add a chapter for CentOS 7 agent preparation
	* docs/config-prereqs.txt: docs/config-prereqs.txt: clarify that
	  OpenBSD multitude of autotools versions is a blessing, not a pain
	  ;)
	* docs/config-prereqs.txt: docs/config-prereqs.txt: clarify that JDK
	  installation in Debian guests may need /proc submounted
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: move "sudo"
	  installation away from useradd example (so "apt-get" does not
	  pollute non-debian guest examples)
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: change
	  CentOS7 example guest name from ...-x86_64 to ...-x86-64 (or
	  -amd64) to avoid loss of character
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: avoid
	  "AltArch" CentOS i686, use just x86_64 as something easier to get
	  hands on

2021-12-27  hunter86bg <hunter86_bg@yahoo.com>

	* data/driver.list.in: Add Cyber Power PR1500RT2U, fixes
	  networkupstools/nut#1191

2021-12-27  Jim Klimov <jim@jimklimov.com>

	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: remind to
	  revise container MAC addresses
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: clarify
	  that "third-party distro" LXC helpers may need chiseling
	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: hint at needed "pacman" for Arch Linux container
	  installation
	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: add installation of RPM based distros as guests on non-
	  RPM (DEB) hosts
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: clarify how
	  to find defined LXC templates, and get usage details about them

2021-12-25  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_ser.c: drivers/riello_ser.c: do not include
	  hidparser.h (hiccups in usb-common.h due to lack of
	  WITH_LIBUSB_x_y)
	* drivers/riello_ser.c: drivers/riello_ser.c: do not include
	  hidparser.h (hiccups in usb-common.h due to lack of
	  WITH_LIBUSB_x_y)
	* drivers/libshut.c: drivers/libshut.c: adjust data_size usage to
	  usb_ctrl_charbufsize typedef

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: switch default warnings level to
	  "medium"
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: range-check quiesced by
	  pragmas (GCC)
	* drivers/libusb0.c: drivers/libusb0.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/libusb1.c: drivers/libusb1.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/libshut.c: drivers/libshut.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/hidparser.c: drivers/hidparser.c: do not separate if-clause
	  parenthesis by pragmas (GCC)

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb1.c: drivers/libusb1.c: fix whitespace (break long
	  lines)
	* drivers/libshut.h: drivers/libshut.h: define ERROR_ACCESS etc. used
	  for USB(-like) result states

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* drivers/hidparser.c, drivers/hidparser.h, drivers/libhid.c,
	  drivers/libhid.h, drivers/libshut.c, drivers/libshut.h,
	  drivers/libusb0.c, drivers/libusb1.c, drivers/nut_libusb.h,
	  drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c,
	  drivers/riello_usb.c, drivers/tripplite_usb.c, drivers/usb-
	  common.h, drivers/usbhid-ups.c: drivers (c,h) USB, HID and SHUT:
	  converge parameter usage from strict int types to backend API
	  dependent "usb_ctrl_*" and "usb_dev_handle" typedefs, then range-
	  check and cast the numbers, and avoid build warnings

2021-12-25  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.c: drivers/libshut.c: adjust data_size usage to
	  usb_ctrl_charbufsize typedef

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: switch default warnings level to
	  "medium"
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: range-check quiesced by
	  pragmas (GCC)
	* drivers/libusb0.c: drivers/libusb0.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/libusb1.c: drivers/libusb1.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/libshut.c: drivers/libshut.c: do not separate if-clause
	  parenthesis by pragmas (GCC)
	* drivers/hidparser.c: drivers/hidparser.c: do not separate if-clause
	  parenthesis by pragmas (GCC)

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb1.c: drivers/libusb1.c: fix whitespace (break long
	  lines)
	* drivers/libshut.h: drivers/libshut.h: define ERROR_ACCESS etc. used
	  for USB(-like) result states

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* drivers/hidparser.c, drivers/hidparser.h, drivers/libhid.c,
	  drivers/libhid.h, drivers/libshut.c, drivers/libshut.h,
	  drivers/libusb0.c, drivers/libusb1.c, drivers/nut_libusb.h,
	  drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c,
	  drivers/riello_usb.c, drivers/tripplite_usb.c, drivers/usb-
	  common.h, drivers/usbhid-ups.c: drivers (c,h) USB, HID and SHUT:
	  converge parameter usage from strict int types to backend API
	  dependent "usb_ctrl_*" and "usb_dev_handle" typedefs, then range-
	  check and cast the numbers, and avoid build warnings

2021-12-25  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c, drivers/usb-
	  common.h, m4/nut_check_libusb.m4: m4/nut_check_libusb.m4,
	  drivers/usb-common.h + nutdrv_atcl_usb.c + richcomm_usb.c: only
	  apply usb_detach_kernel_driver_np to libusb-0.1 builds (no alias
	  tricks)
	* drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c, m4/nut_check_libusb.m4:
	  m4/nut_check_libusb.m4, drivers/libusb1.c + nutdrv_atcl_usb.c +
	  richcomm_usb.c: honor that libusb-1.0 may
	  HAVE_LIBUSB_DETACH_KERNEL_DRIVER_NP
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c, drivers/usb-
	  common.h, m4/nut_check_libusb.m4: m4/nut_check_libusb.m4,
	  drivers/usb-common.h + nutdrv_atcl_usb.c + richcomm_usb.c: only
	  apply usb_detach_kernel_driver_np to libusb-0.1 builds (no alias
	  tricks)
	* drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c, m4/nut_check_libusb.m4:
	  m4/nut_check_libusb.m4, drivers/libusb1.c + nutdrv_atcl_usb.c +
	  richcomm_usb.c: honor that libusb-1.0 may
	  HAVE_LIBUSB_DETACH_KERNEL_DRIVER_NP

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c,
	  drivers/riello_usb.c: drivers/riello_usb.c, richcomm_usb.c,
	  nutdrv_atcl_usb.c: fix remaining uses of (lib)usb_strerror with
	  nut_usb_strerror()

2021-12-25  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/usb-common.h: drivers/usb-common.h: map
	  libusb_detach_kernel_driver_np (1.0) as usb_detach_kernel_driver_np
	  (0.1)
	* drivers/usb-common.h: drivers/usb-common.h: map
	  libusb_detach_kernel_driver_np (1.0) as usb_detach_kernel_driver_np
	  (0.1)

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: update "clang-medium" warnings pre-set
	  with -Wno-incompatible-pointer-types-discards-qualifiers
	* drivers/libusb1.c: drivers/libusb1.c: some more whitespace and
	  comment fixes
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c,
	  drivers/riello_usb.c: drivers/riello_usb.c, richcomm_usb.c,
	  nutdrv_atcl_usb.c: fix remaining uses of (lib)usb_strerror with
	  nut_usb_strerror()
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: missed
	  whitespace fixes
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: comment
	  "#else WITH_LIBUSB_..." in long blocks

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  whitespace (indentation etc)
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: drop local
	  libusb-0.1 vs 1.0 definitions now provided by usb-common.h
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: update comments

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: make sure (missing)
	  methods from another API are defined in config.h (so "#if HAVE_..."
	  is valid and not guessed as 0)

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: whitespace-separate
	  definitions of ERROR_ACCESS etc., nut_usb_strerror() and similar
	  macros

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: include "common.h"

2021-12-16  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: define
	  PRI_NUT_USB_CTRL_CHARBUFSIZE, usb_ctrl_msgvalue and
	  usb_ctrl_strindex
	* drivers/usb-common.h: drivers/usb-common.h: clarify that libusb
	  timeouts are in milliseconds (with variouts int types per API
	  version)
	* drivers/usb-common.h: drivers/usb-common.h: update comment about
	  mapping from libusb-0.1 to libusb-1.0 API
	* drivers/nut_libusb.h: drivers/nut_libusb.h: comment the practical
	  mess around hid_rep_index
	* drivers/usb-common.h: drivers/usb-common.h: comment which API
	  version each endif is for
	* drivers/usb-common.h: drivers/usb-common.h: note the arg type for
	  libusb_strerror() in comments to our macro wrapper
	  nut_usb_strerror()
	* drivers/usb-common.h: drivers/usb-common.h: update heading comment
	  with references to different API docs
	* drivers/usb-common.h: drivers/usb-common.h: update heading comment
	  and (C) for libusb-1.0 related changes

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.c: drivers/libshut.c: shut_control_msg(): data_size
	  is a "short int" (not size_t) in this branch

2021-12-15  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.c: drivers/libshut.c: shut_control_msg(): range-
	  check data_size before stuffing the number into a char
	* drivers/libshut.c: drivers/libshut.c: range-check and cast ints to
	  struct members and library args
	* drivers/libshut.c: drivers/libshut.c: braces fix
	* drivers/nut_libusb.h, drivers/usb-common.h: drivers/usb-common.h +
	  nut_libusb.h: typedef more usb_ctrl_* tokens to match libusb-0.1 vs
	  1.0 API

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: comment FIXME for
	  possible uses of usb_ctrl_* typedefs

2021-12-13  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c, drivers/usb-common.h:
	  USB: Rename typedef usb_ctrl_char to usb_ctrl_charbuf to avoid
	  confsion (it is a char* sibling, not plain char)
	* drivers/libshut.h, drivers/nut_libusb.h: drivers/nut_libusb.h,
	  libshut.h: whitespace fixes (align "version")

2021-12-10  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: current use of
	  SHUT_MODE relies on defined/not-defined, not on value for plain #if
	  macro
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: adapt to usb-common.h and
	  (usb_ctrl_char) casting
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: adapt to usb-common.h
	  and (usb_ctrl_char) casting
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: adapt to usb-
	  common.h and (usb_ctrl_char) casting

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: fix whitespace
	  (break long lines)
	* drivers/riello_usb.c: drivers/riello_usb.c: fix whitespace (break
	  long lines)

2021-12-10  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_usb.c: drivers/riello_usb.c: adapt to usb-common.h
	  and (usb_ctrl_char) casting
	* drivers/riello.h: drivers/riello.h: do not define duplicate
	  USB_ENDPOINT_IN/USB_ENDPOINT_OUT
	* drivers/usb-common.h: drivers/usb-common.h: convert
	  usb_get_string{_simple}() from macro aliases to real mappings with
	  range-checks for libusb-1.0 API
	* drivers/usb-common.h: drivers/usb-common.h: mark "static inline"
	  functions with
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TYPE_LIMITS_BESIDEFUNC since not
	  all C files call them
	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/libhid.h,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c,
	  drivers/tripplite_usb.c, drivers/usb-common.h: drivers/usb-
	  common.h: consolidate libusb-0.1 vs 1.0 data/func mappings from
	  *usb.c files
	* drivers/nut_libusb.h, drivers/usb-common.h: drivers/nut_libusb.h
	  already includes "usb-common.h" so no need to pull LibUSB headers
	  again
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: range-check and cast
	  args for usb_control_msg() => libusb_control_transfer() and
	  usb_interrupt_read() => libusb_interrupt_transfer() for libusb-1.0
	  support

2021-12-09  Jim Klimov <jim@jimklimov.com>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)
	* drivers/usb-common.h: drivers/usb-common.h: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/nut_libusb.h: drivers/nut_libusb.h: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb1.c: drivers/libusb1.c:
	  HAVE_LIBUSB_DETACH_KERNEL_DRIVER needs "#ifdef" not "#if"
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c, tools/nut-
	  scanner/scan_usb.c: Convert C code from "#ifdef WITH_LIBUSB_x_y" to
	  "#if" tests for defined value - merging missed a few in
	  libusb-1.0+0.1 branch

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/nut_libusb.h,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c,
	  drivers/tripplite_usb.c, drivers/usb-common.h, tools/nut-
	  scanner/nutscan-init.c, tools/nut-scanner/scan_usb.c, tools/nut-
	  usbinfo.pl: Convert C code from "#ifdef WITH_LIBUSB_x_y" to "#if"
	  tests for defined value

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: update "clang-medium" warnings pre-set
	  with -Wno-incompatible-pointer-types-discards-qualifiers

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  whitespace (indentation etc)
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: drop local
	  libusb-0.1 vs 1.0 definitions now provided by usb-common.h
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: update comments

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: make sure (missing)
	  methods from another API are defined in config.h (so "#if HAVE_..."
	  is valid and not guessed as 0)

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: whitespace-separate
	  definitions of ERROR_ACCESS etc., nut_usb_strerror() and similar
	  macros

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: include "common.h"

2021-12-16  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: define
	  PRI_NUT_USB_CTRL_CHARBUFSIZE, usb_ctrl_msgvalue and
	  usb_ctrl_strindex
	* drivers/usb-common.h: drivers/usb-common.h: clarify that libusb
	  timeouts are in milliseconds (with variouts int types per API
	  version)
	* drivers/usb-common.h: drivers/usb-common.h: update comment about
	  mapping from libusb-0.1 to libusb-1.0 API
	* drivers/nut_libusb.h: drivers/nut_libusb.h: comment the practical
	  mess around hid_rep_index
	* drivers/usb-common.h: drivers/usb-common.h: comment which API
	  version each endif is for
	* drivers/usb-common.h: drivers/usb-common.h: note the arg type for
	  libusb_strerror() in comments to our macro wrapper
	  nut_usb_strerror()
	* drivers/usb-common.h: drivers/usb-common.h: update heading comment
	  with references to different API docs
	* drivers/usb-common.h: drivers/usb-common.h: update heading comment
	  and (C) for libusb-1.0 related changes

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.c: drivers/libshut.c: shut_control_msg(): data_size
	  is a "short int" (not size_t) in this branch

2021-12-15  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.c: drivers/libshut.c: shut_control_msg(): range-
	  check data_size before stuffing the number into a char
	* drivers/libshut.c: drivers/libshut.c: range-check and cast ints to
	  struct members and library args
	* drivers/libshut.c: drivers/libshut.c: braces fix
	* drivers/nut_libusb.h, drivers/usb-common.h: drivers/usb-common.h +
	  nut_libusb.h: typedef more usb_ctrl_* tokens to match libusb-0.1 vs
	  1.0 API

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: comment FIXME for
	  possible uses of usb_ctrl_* typedefs

2021-12-13  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c, drivers/usb-common.h:
	  USB: Rename typedef usb_ctrl_char to usb_ctrl_charbuf to avoid
	  confsion (it is a char* sibling, not plain char)
	* drivers/libshut.h, drivers/nut_libusb.h: drivers/nut_libusb.h,
	  libshut.h: whitespace fixes (align "version")

2021-12-10  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: current use of
	  SHUT_MODE relies on defined/not-defined, not on value for plain #if
	  macro
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: adapt to usb-common.h and
	  (usb_ctrl_char) casting
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: adapt to usb-common.h
	  and (usb_ctrl_char) casting
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: adapt to usb-
	  common.h and (usb_ctrl_char) casting

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: fix whitespace
	  (break long lines)
	* drivers/riello_usb.c: drivers/riello_usb.c: fix whitespace (break
	  long lines)

2021-12-10  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_usb.c: drivers/riello_usb.c: adapt to usb-common.h
	  and (usb_ctrl_char) casting
	* drivers/riello.h: drivers/riello.h: do not define duplicate
	  USB_ENDPOINT_IN/USB_ENDPOINT_OUT
	* drivers/usb-common.h: drivers/usb-common.h: convert
	  usb_get_string{_simple}() from macro aliases to real mappings with
	  range-checks for libusb-1.0 API
	* drivers/usb-common.h: drivers/usb-common.h: mark "static inline"
	  functions with
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TYPE_LIMITS_BESIDEFUNC since not
	  all C files call them
	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/libhid.h,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c,
	  drivers/tripplite_usb.c, drivers/usb-common.h: drivers/usb-
	  common.h: consolidate libusb-0.1 vs 1.0 data/func mappings from
	  *usb.c files
	* drivers/nut_libusb.h, drivers/usb-common.h: drivers/nut_libusb.h
	  already includes "usb-common.h" so no need to pull LibUSB headers
	  again
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: range-check and cast
	  args for usb_control_msg() => libusb_control_transfer() and
	  usb_interrupt_read() => libusb_interrupt_transfer() for libusb-1.0
	  support

2021-12-09  Jim Klimov <jim@jimklimov.com>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)
	* drivers/usb-common.h: drivers/usb-common.h: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/nut_libusb.h: drivers/nut_libusb.h: sanity check that
	  exactly one version of WITH_LIBUSB_x_y is set (defined and has
	  value 1)

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb1.c: drivers/libusb1.c:
	  HAVE_LIBUSB_DETACH_KERNEL_DRIVER needs "#ifdef" not "#if"

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/nut_libusb.h,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c,
	  drivers/tripplite_usb.c, drivers/usb-common.h, tools/nut-
	  scanner/nutscan-init.c, tools/nut-scanner/scan_usb.c, tools/nut-
	  usbinfo.pl: Convert C code from "#ifdef WITH_LIBUSB_x_y" to "#if"
	  tests for defined value

2021-12-18  Dave Williams <dave@opensourcesolutions.co.uk>

	* drivers/apc-hid.c, drivers/arduino-hid.c, drivers/belkin-hid.c,
	  drivers/cps-hid.c, drivers/delta_ups-hid.c, drivers/explore-hid.c,
	  drivers/hidtypes.h, drivers/idowell-hid.c, drivers/liebert-hid.c,
	  drivers/mge-hid.c, drivers/openups-hid.c, drivers/powercom-hid.c,
	  drivers/powervar-hid.c, drivers/salicru-hid.c, drivers/tripplite-
	  hid.c, drivers/usbhid-ups.c, drivers/usbhid-ups.h: Fix #439
	  Incorrect Output Voltage on CPS*EFPCLCD

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am: define SHUT_MODE=1 (with
	  a value) so #if is predictable

2021-12-09  Jim Klimov <jim@jimklimov.com>

	* configure.ac, m4/nut_check_libusb.m4: configure.ac +
	  m4/nut_check_libusb.m4: rectify WITH_LIBUSB_x_y definitions

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: (hidden) debug
	  before AC_DEFINE
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: always AC_DEFINE
	  the WITH_LIBUSB_1_0 and WITH_LIBUSB_0_1 macros with a 0 or 1 value

2021-12-07  Jim Klimov <jim@jimklimov.com>

	* docs/configure.txt: configure.ac et al: drop the extra --with-
	  libusb-version and handle its goals via --with-usb=VERSION

2021-12-24  Jim Klimov <jim@jimklimov.com>

	* configure.ac, m4/nut_check_libusb.m4: m4/nut_check_libusb.m4 +
	  configure.ac: port newer solution for libusb version selection from
	  libusb-1.0 branch

2021-12-07  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: drop duplicate NUT_CHECK_LIBNETSNMP
	* configure.ac: configure.ac: regroup some NUT_ARG_WITH() closer to
	  their NUT_CHECK_*() so help for detailed options is near

2021-11-15  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: Move "additional USB-related checks" from
	  configure.ac to m4/nut_check_libusb.m4

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am: define SHUT_MODE=1 (with
	  a value) so #if is predictable

2021-12-09  Jim Klimov <jim@jimklimov.com>

	* configure.ac, m4/nut_check_libusb.m4: configure.ac +
	  m4/nut_check_libusb.m4: rectify WITH_LIBUSB_x_y definitions

2021-12-08  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: (hidden) debug
	  before AC_DEFINE
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: always AC_DEFINE
	  the WITH_LIBUSB_1_0 and WITH_LIBUSB_0_1 macros with a 0 or 1 value

2021-12-24  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: fix in modbus response value check

2021-12-23  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c, drivers/generic_modbus.h: handle broken
	  pine error in modbus TCP connections, configurable modbus response
	  timeouts between requests and frame bytes

2021-12-23  Jim Klimov <jimklimov+nut@gmail.com>

	* ci_build.sh: ci_build.sh: separate the "RES" vars used for
	  configure_nut() and default-all-errors processing (extend to
	  libusb-1.0* branches)
	* tests/getvaluetest.c: tests/getvaluetest.c: include "config.h"
	  first
	* tests/Makefile.am: tests/Makefile.am: only TEST getvaluetest "if
	  WITH_USB"
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: do not report
	  misleading "none (libusb-0.1-config)" as the detected libusb
	  version  Seems this confused not only human readers, but also the
	  verdict - whether we build WITH_USB
	* ci_build.sh: ci_build.sh: separate the "RES" vars used for
	  configure_nut() and default-all-errors processing (extend to
	  libusb-1.0* branches
	* tests/getvaluetest.c: tests/getvaluetest.c: include "config.h"
	  first
	* tests/Makefile.am: tests/Makefile.am: only TEST getvaluetest "if
	  WITH_USB"

2021-12-22  Jim Klimov <jim@jimklimov.com>

	* clients/upsclient.c: clients/upsclient.c: upscli_tryconnect(): in
	  logged messages, clarity "connect to NUT server %s"  Otherwise nut-
	  scanner output looks awkward when looking at large subnets with
	  many protocols (including "Old NUT")
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  convert logging in the main loop from a lot of fprintf() to
	  manageable upsdebugx()
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c:
	  convert logging in the main loop from a lot of fprintf() to
	  manageable upsdebugx()
	* ci_build.sh: ci_build.sh: fix a typo, copypasted around
	* tests/Makefile.am: tests/Makefile.am: only build getvaluetest "if
	  WITH_USB"
	* drivers/blazer_usb.c: drivers/blazer_usb.c: forget
	  libusb_device_handle
	* drivers/libhid.h: drivers/libhid.h: forget libusb_device_handle

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: allow to build custom
	  NUT_USB_VARIANTS=libusb-x.y (not plain "x.y")
	* ci_build.sh: ci_build.sh: allow to build custom NUT_USB_VARIANTS
	  and skip building a separate NUT_SSL_VARIANTS=auto

2021-12-22  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: fix a typo, copypasted around
	* tests/Makefile.am: tests/Makefile.am: only build getvaluetest "if
	  WITH_USB"
	* drivers/blazer_usb.c: drivers/blazer_usb.c: forget
	  libusb_device_handle
	* drivers/libhid.h: drivers/libhid.h: forget libusb_device_handle

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict: update for recent NEWS
	* NEWS: NEWS: prepare for nutdrv-qx legrand merge in 2.7.5 timeline
	* NEWS: NEWS: prepare for nutdrv-qx ablerex merge in 2.7.5 timeline
	* NEWS: NEWS: know about usbhid-ups Delta Minuteman support for NUT
	  v2.7.5
	* NEWS: NEWS: fix USB LogMin/LogMax mismatch reporting (just once!)
	  for NUT v2.7.5
	* NEWS: NEWS: add a little delay between multicommands [PR #1228] for
	  NUT v2.7.5
	* NEWS: NEWS: prepare for libusb-1.0 merge in 2.7.5 timeline

2021-05-25  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: added nutdrv_qx "phoenixtec" subdriver in NUT-2.7.5

2021-04-23  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict + NEWS: fix both to pass spellcheck

2019-03-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut.dict: Update spelling dictionary

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: allow to build custom
	  NUT_USB_VARIANTS=libusb-x.y (not plain "x.y")
	* ci_build.sh: ci_build.sh: allow to build custom NUT_USB_VARIANTS
	  and skip building a separate NUT_SSL_VARIANTS=auto
	* ci_build.sh: ci_build.sh: allow to build custom
	  NUT_USB_VARIANTS=libusb-x.y (not plain "x.y")
	* ci_build.sh: ci_build.sh: allow to build custom NUT_USB_VARIANTS
	  and skip building a separate NUT_SSL_VARIANTS=auto

2021-12-21  Jim Klimov <jimklimov@gmail.com>

	* drivers/legrand-hid.c: drivers/legrand-hid.c: fix type of
	  usb_device_id_t vendorID/productID to uint16_t  * *{usb,hid}.c:
	  sentinel in a table of uint16_t can not be -1

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: separate the "RES" vars used for
	  configure_nut() and default-all-errors processing

2021-12-15  Jim Klimov <jim@jimklimov.com>

	* drivers/libshut.h: drivers/libshut.h: whitespace fixes (make func
	  ptrs more visible)

2021-12-13  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb.h: drivers/libusb.h: whitespace fixes (make func
	  ptrs more visible)

2021-12-10  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: comment the rationale reminder for
	  "default-all-errors" mode
	* ci_build.sh: ci_build.sh: try more options for non-verbose MAKE
	  runs
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: update
	  suggestions and envvar list for NOTIFYCMD callouts
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_UNUSED_FUNCTION

2021-12-19  Jim Klimov <jim@jimklimov.com>

	* drivers/hidparser.c, drivers/hidparser.h: drivers/hidparser.{c,h}:
	  fix ReportDescSize from int to size_t

2021-12-15  Jim Klimov <jim@jimklimov.com>

	* drivers/libhid.c, drivers/libhid.h: drivers/libhid.{c,h}:
	  HIDGetDataValue(), refresh_report_buffer(), get_item_buffered():
	  fix "age" from int to time_t, to match time() operations

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: date_conversion_fun():
	  hush a string overflow warning (overkill the buffer size a bit)

2021-12-15  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: date_conversion_fun():
	  comment and cast numeric type conversions

2021-12-16  Jim Klimov <jim@jimklimov.com>

	* include/nut_stdint.h: include/nut_stdint.h: make sure we know
	  PRIsize and PRIssize

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt, docs/nut.dict: docs/developers.txt: note that
	  we define "gcc-medium|gcc-hard" warnings without "pedantic" for
	  C89/C90/ANSI builds (flaws in OS headers are out of our control)
	* configure.ac: configure.ac: define "gcc-medium|gcc-hard" warnings
	  with "extra" always, but without "pedantic" for C89/C90/ANSI builds
	  (flaws in OS headers are out of our control)
	* tests/Makefile.am: tests/Makefile.am: consider LIBUSB_CFLAGS when
	  building parser test
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: separate (and
	  disable by default) ANSI C build scenarios, they are too noisy in
	  fightwarn for no real good
	* common/common.c: common/common.c: s_upsdebug*(): move fmt2[]
	  declarations to top from code
	* common/common.c: common/common.c: fix comments from // to /* */
	* drivers/hidparser.h: drivers/hidparser.h: include "config.h"
	* server/upsd.c: server/upsd.c: #include config.h first

2021-12-21  Jim Klimov <jimklimov@gmail.com>

	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Fix this on some of the CI
	  platforms:  ```` [2021-12-21T09:21:47.623Z] nutdrv_qx.c:1665:2:
	  error: initialization from incompatible pointer type [-Werror]
	  [2021-12-21T09:21:47.623Z]   { USB_DEVICE(0xffff, 0x0000), NULL,
	  NULL,   &ablerex_subdriver }, /* Ablerex 625L USB */
	  [2021-12-21T09:21:47.623Z]   ^ [2021-12-21T09:21:47.623Z]
	  nutdrv_qx.c:1665:2: error: (near initialization for
	  'qx_usb_id[1].fun') [-Werror] ````

2021-12-21  Jim Klimov <jim@jimklimov.com>

	* scripts/upower/95-upower-hid.rules: Update 95-upower-hid.rules  Add
	  VID/PID for Minuteman UPS
	* drivers/blazer_usb.c: drivers/blazer_usb.c: cast tmp as char*
	  Older compilers complain that we are:  passing argument 3 of
	  'usb_interrupt_read' from incompatible pointer type expected 'char
	  *' but argument is of type 'char (*)[512]'

2021-12-21  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Update for PR #1135

2021-12-20  Jim Klimov <jimklimov@gmail.com>

	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Whitespace fix

2021-12-20  hunter86bg <hunter86_bg@yahoo.com>

	* data/driver.list.in: Add Powerwalker VFI 3000 TG Online UPS to
	  driver.list.in (#1224)

2021-12-20  Jim Klimov <jimklimov@gmail.com>

	* drivers/hidparser.c: Update hidparser.c  Fix whitespace in recent
	  changes for LogMin/LogMax rectification

2021-12-20  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  whitespace (indentation etc)
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix whitespace (break
	  long lines)
	* drivers/riello_usb.c: drivers/riello_usb.c: fix whitespace (break
	  long lines)
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: fix whitespace
	  (break long lines)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix whitespace (break
	  long lines)
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix whitespace (break
	  long lines)

2021-12-19  Scott Colby <scott@scolby.com>

	* drivers/usbhid-ups.c: Add a short sleep between fallback instcmds
	  in usbhid-ups.  For some devices, missing instcmds are emulated by
	  calling two instcmds that do exist in sequence. For some devices,
	  when these commands arrive too quickly, they are not properly
	  processed. (One, both, or neither of the commands are acted upon.)
	  Adding a 1/8th-second delay (125,000 microseconds) between the two
	  instcmds that make up the fallback command has worked to make the
	  TrippLite AVR750U (new version with the 3024 productId/protocol)
	  behave consistently when using the fallback commands
	  (shutdown.return and shutdown.stayoff). This delay is also short
	  enough that it seems unlikely to cause a problem for any devices
	  which don't exhibit this issue.

2021-12-16  Ablerexsoftware <Ablerex.software@ablerex.com.tw>

	* docs/acknowledgements.txt, docs/man/nutdrv_qx.txt, docs/nutdrv_qx-
	  subdrivers.txt, drivers/Makefile.am, drivers/nutdrv_qx.c: modify CI
	  warnings and Replace the new sub driver

2021-12-15  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/hidparser.c: Move check for LogMax encoding error to
	  parsing of report description  At least one UPS [APC Back-UPS
	  BX1600MI FW:294201G -302201G] is known to have encoding errors in
	  its USB HID report description such that a conforming
	  interpretation of the encoded LogicalMaximum value indicates that
	  it is -1 and the resulting LogicalMin..LogicalMax range is 0..-1.
	  The actual report values read are correctly encoded.  Rather than
	  log a range error each time a value is read we can detect the
	  encoding error when the report description is read (once, at
	  startup) and adjust for the encoding error at that time.

2021-12-09  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: Refactor `./ci_build.sh spellcheck` to be more useful
	* ci_build.sh: ci_build.sh: refactor
	  build_to_only_catch_errors_target() out of
	  build_to_only_catch_errors()
	* ci_build.sh, docs/developers.txt: ci_build.sh: introduce support
	  for CI_SHELL_IS_FLAKY=true
	* docs/developers.txt: docs/developers.txt: when introducing
	  ci_build.sh, mention that NUT CI farm tells how to reproduce builds

2021-12-08  Jim Klimov <jimklimov@gmail.com>

	* docs/man/nut-scanner.txt: Update nut-scanner.txt  Clarify SNMP
	  auth/priv proto support depends on Net-SNMP lib
	* docs/man/snmp-ups.txt: Update snmp-ups.txt  Clarify SNMP auth/priv
	  proto support depends on Net-SNMP lib

2021-12-08  Mauro Guerrera <mauroguerrera@eaton.com>

	* docs/man/snmp-ups.txt: Update snmp-ups docs
	* docs/man/nut-scanner.txt: Update docs to list new auth and privacy
	  encryption options

2021-12-07  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: refactor shell
	  if/case to m4 (tracking down missed parentheses)
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: port more function
	  probes from libusb-1.0+0.1 branch
	* ci_build.sh, configure.ac, docs/configure.txt,
	  m4/nut_check_libusb.m4: configure.ac et al: drop the extra --with-
	  libusb-version and handle its goals via --with-usb=VERSION
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: port comments and
	  m4 markup from libusb-1.0+0.1 branch
	* configure.ac, m4/nut_check_libusb.m4: configure.ac: move remaining
	  libusb sanity checks into the m4/nut_check_libusb.m4 file
	* configure.ac: configure.ac: drop duplicate NUT_CHECK_LIBNETSNMP
	* configure.ac: configure.ac: regroup some NUT_ARG_WITH() closer to
	  their NUT_CHECK_*() so help for detailed options is near
	* drivers/libusb1.c: drivers/libusb1.c: nut_libusb_open(): range-
	  check and cast libusb_control_transfer() arg rdlen
	* drivers/libusb1.c: drivers/libusb1.c: nut_libusb_open(): range-
	  check and cast libusb_control_transfer() arg rdlen
	* Makefile.am: Makefile.am: do not let (parallel) "make maintainer-
	  clean" remove the files that cleanup recipe needs
	* ci_build.sh: Revert "ci_build.sh: fix bogus expression for
	  BUILDSTODO"  This reverts commit
	  e57eec425da5c2020656fd48ec3f8bb9bbf55c52 and adds comments and
	  handling why that weird construct was not bogus ;)
	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: reword notes for default QEMU container memory settings
	* ci_build.sh: Add a shortcut hack to "./ci_build.sh spellcheck"
	  easily
	* common/Makefile.am: common/Makefile.am: some "make" implems dislike
	  DRY multi-entry definition of same target (common.c)
	* ci_build.sh: Add a shortcut hack to "./ci_build.sh spellcheck"
	  easily
	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: drivers/snmp-
	  ups.c + tools/nut-scanner/scan_snmp.c: hide sanity checks before
	  generate_Ku() into pragmas to not warn about type-limits
	  ("comparison is always false due to limited range of data type" on
	  some architectures)
	* drivers/solis.c: drivers/solis.c: make sure nut_stdint.h is
	  included early and defines size_t

2021-12-06  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: drivers/snmp-
	  ups.c + tools/nut-scanner/scan_snmp.c: align (cast) arg type of
	  generate_Ku() with net-snmp headers, and document the inconsistency
	  of size_t vs u_int in the same API
	* drivers/snmp-ups.c: drivers/snmp-ups.c: align (cast) arg type of
	  malloc()/realloc()
	* drivers/snmp-ups.c: drivers/snmp-ups.c: align (cast) arg type of
	  snmp_errstring() vs response->errstat (int vs long), and document
	  the inconsistency with net-snmp headers
	* drivers/snmp-ups.c: drivers/snmp-ups.c: upsdrv_makevartable(): fix
	  maths with size_t vs int
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: setvar(): cast
	  placing of new_unit_id into wire protocol (FIXME? Does that code
	  assume CPU endianness?)
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c:
	  upsdrv_initinfo(): fix receiver of strtol()
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: whitespace fixes
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: setvar(): fix
	  determination of outlet index number
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: debug_message():
	  fix len from int to size_t
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: soft_shutdown():
	  cast placing of offdelay into wire protocol (FIXME? Does that code
	  assume CPU endianness?)
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: fix reading and
	  printing of offdelay (unsigned int in this driver)
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: fix hex2d() to
	  long as a consumer of strtol()
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: fix toprint_str()
	  length to size_t and toprint(x) to char
	* drivers/netxml-ups.c: drivers/netxml-ups.c: fix type of "ret" for
	  ne_read_response_block() and ne_sock_read() to ssize_t (as in
	  libneon headers)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix qx_command() to
	  return ssize_t like ser_send() at least
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  "u_langid_fix" in upsdrv_initups()
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  length of "cmdlen" in phoenixtec_command()
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  bytes in phoenixtec_command()
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  bytes in fuji_command()
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  bytes in repetitive "Simple unicode -> ASCII inplace conversion"
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast int
	  vs size_t in subdriver handlers (buflen, ret, i++)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: initialize ret=0 before
	  we potentially use it in loop i+=ret (should not happen in current
	  code, but...)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: cast upsdebug_hex()
	  logging with non-size_t args
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: range-check and cast
	  receivers of strtol()
	* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: drivers/nutdrv_qx.{c,h}:
	  qx_process(), item_t.answer_len: fix lengths from int to size_t
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: qx_command(): indent
	  ifdefs for TESTING/QX_USB/QX_SERIAL for easier navigation
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: qx_command() complains
	  about unused parameters (not sure why); mark with
	  NUT_UNUSED_VARIABLE just in case
	* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: drivers/nutdrv_qx.{c,h}:
	  fix STATUS() macro, qx_status(), status_lkp_t.status_mask field and
	  ups_status var to all be "unsigned int"
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c:
	  range-check and cast receivers of strtol(); wrap a few long lines
	* drivers/nutdrv_qx_mecer.c: drivers/nutdrv_qx_mecer.c: fix receivers
	  of strtol()
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  masterguard_test_battery(): fix receivers of strtol() - duration
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  masterguard_shutdown(): fix receivers of strtol() -
	  ondelay/offdelay
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  masterguard_new_slaveaddr(): range-check and cast
	  "masterguard_next_slaveaddr"
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  fix receivers of strtol()
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  masterguard_output_voltages(): fix type for sizeof() maths
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  masterguard_model(): fix type of min_bp/max_bp

2021-12-04  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_blazer-common.c: drivers/nutdrv_qx_blazer-
	  common.c: fix and range-check receivers of strtol()
	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: fix
	  receivers of strtol()
	* drivers/nutdrv_qx_voltronic-qs-hex.c: drivers/nutdrv_qx_voltronic-
	  qs-hex.c: fix receivers of strtol()
	* drivers/solis.c: drivers/solis.c: fix packet_size from int to
	  size_t
	* drivers/apcsmart.c: drivers/apcsmart.c: bit-wise &= ~() insists it
	  is for unsigned (int) types - vt->flags
	* drivers/apcsmart.c: drivers/apcsmart.c: bit-wise &= ~() insists it
	  is for unsigned (int) types - termios struct
	* drivers/apcsmart.c: drivers/apcsmart.c: sdcmd_CS: fix cshd from int
	  to useconds_t
	* drivers/apcsmart.c: drivers/apcsmart.c: whitespace fix
	* drivers/apcsmart.c: drivers/apcsmart.c: apc_getcaps(): fix i,
	  nument, entlen from int to size_t
	* drivers/apcsmart.c: drivers/apcsmart.c: cast prtchr() args from
	  (unsigned char) to (char)
	* drivers/apcsmart.c: drivers/apcsmart.c: fix receivers of strtol()
	* drivers/apcsmart.c: drivers/apcsmart.c: cast
	  apc_read*()/apc_write*() from ((const) char) to (const unsigned
	  char)
	* drivers/apcsmart.c: drivers/apcsmart.c: fix receivers of strlen()
	  from int to ssize_t
	* drivers/apcsmart.c, drivers/apcsmart.h: drivers/apcsmart.{c,h}: fix
	  ups_status and APC_STAT_* from int to long (to match strtol() used)
	* drivers/apcsmart.c: drivers/apcsmart.c: fix receivers of strlen()
	  from int to ssize_t
	* drivers/apcsmart.c: drivers/apcsmart.c: fix
	  apc_read*()/apc_write*() from int to ssize_t to match select_read()
	  et al
	* drivers/apcsmart.c: drivers/apcsmart.c: include main.h => config.h
	  first
	* drivers/apcsmart.c: drivers/apcsmart.c: convert_data(): fix
	  receivers of strtol()
	* drivers/apcsmart-old.c, drivers/apcsmart-old.h: drivers/apcsmart-
	  old.c: fix const/unsigned/char usages
	* drivers/apcsmart-old.c: drivers/apcsmart-old.c: do_capabilities():
	  fix i, nument, entlen from int to size_t
	* drivers/apcsmart-old.c, drivers/apcsmart-old.h: drivers/apcsmart-
	  old.c: fix receivers of strtol()
	* drivers/solis.h: drivers/solis.h: fix packet_size from into to
	  size_t
	* drivers/apcsmart-old.c: drivers/apcsmart-old.c: fix handling of
	  ser_*() retval from int to ssize_t
	* drivers/clone.c: drivers/clone.c: fix ondelay/offdelay handling
	  from int to long (to match strtol() used)
	* drivers/clone-outlet.c: drivers/clone-outlet.c: fix handling of
	  read()/write() retval from int to ssize_t
	* drivers/clone.c: drivers/clone.c: fix handling of read()/write()
	  retval from int to ssize_t
	* drivers/blazer.h, drivers/blazer_ser.c, drivers/blazer_usb.c:
	  drivers/blazer.h + blazer_{ser,usb}.c: blazer_command(): fix
	  handling of ser_get_buf() retval from int to ssize_t
	* drivers/blazer.c: drivers/blazer.c: fix ondelay/offdelay handling
	  from int to long (to match strtol() used)
	* drivers/blazer.c: drivers/blazer.c: fix receivers of strtol() -
	  delay tmp var
	* drivers/powerp-txt.c: drivers/powerp-txt.c: fix ondelay/offdelay
	  handling from int to long (to match strtol() used)
	* drivers/victronups.c: drivers/victronups.c: fix receivers of
	  strtol()
	* drivers/victronups.c: drivers/victronups.c: fix handling of
	  ser_get_line() retval from int to ssize_t
	* drivers/tripplite.c: drivers/tripplite.c: fix receivers of strtol()
	  => hex2d()
	* drivers/tripplite.c: drivers/tripplite.c: fix handling of
	  ser_get_char() retval from int to ssize_t
	* drivers/solis.c, drivers/solis.h: drivers/solis.{c,h}: fix
	  comm_receive() from int to size_t, and match ser_get_buf_len() len-
	  or-error returns
	* drivers/solis.c, drivers/solis.h: drivers/solis.{c,h}: fix byte-
	  sized maths of str2bin() and day counts to uint8_t
	* drivers/solis.c: drivers/solis.c: include main.h => config.h first
	* drivers/solis.c, drivers/solis.h: drivers/solis.c:
	  save_ups_config(): fix casting of ConfigPack[] entries to (unsigned
	  char) from original types
	* drivers/nutdrv_siemens_sitop.c: drivers/nutdrv_siemens_sitop.c: fix
	  handling of ser_get_line() retval from int to ssize_t
	* drivers/safenet.c: drivers/safenet.c: fix ondelay/offdelay handling
	  from int to long (to match strtol() used)
	* drivers/safenet.c: drivers/safenet.c: fix array loop iterator from
	  int to size_t
	* drivers/safenet.c: drivers/safenet.c: fix handling of
	  ser_get_line() retval from int to ssize_t
	* drivers/rhino.c: drivers/rhino.c: fix handling of ser_get_line()
	  retval from int to ssize_t
	* drivers/powercom.h: drivers/powercom.h: fix whitespace
	  (indentations)
	* drivers/powercom.c: drivers/powercom.c: fix array loop iterator
	  from int to size_t
	* drivers/powercom.c: drivers/powercom.c: fix handling of
	  ser_get_line() retval from int to ssize_t
	* drivers/optiups.c: drivers/optiups.c: a few whitespace nits
	* drivers/optiups.c: drivers/optiups.c: fix OPTISBIT_* handling from
	  int to long (to match strtol() used)
	* drivers/optiups.c: drivers/optiups.c: fix optifill() len from int
	  to size_t
	* drivers/optiups.c: drivers/optiups.c: fix handling of
	  ser_get_line() retval from int to ssize_t
	* drivers/oneac.c: drivers/oneac.c: fix handling of ser_get_line()
	  retval from int to ssize_t
	* scripts/subdriver/gen-usbhid-subdriver.sh: scripts/subdriver/gen-
	  usbhid-subdriver.sh: update generated C heading comment with "TODO"
	  and update generated code whitespace markup
	* drivers/arduino-hid.c, drivers/salicru-hid.c: drivers/usb-
	  common.{c,h} drivers/*{usb,hid}.c: fix type of usb_device_id_t
	  vendorID/productID to uint16_t  Catch up to earlier change for
	  recently merged USB HID drivers; specifically * *{usb,hid}.c:
	  sentinel in a table of uint16_t can not be -1 for: *
	  drivers/salicru-hid.c * drivers/arduino-hid.c *
	  scripts/subdriver/gen-usbhid-subdriver.sh creating the boilerplates

2021-12-03  Jim Klimov <jim@jimklimov.com>

	* drivers/microsol-common.c: drivers/microsol-common.c: fix
	  setup_poweroff_schedule() vars from int to bool_t to match
	  set_schedule_time()
	* drivers/microsol-common.c: drivers/microsol-common.c: fix
	  get_base_info(), get_updated_info() buf sizes from unsigned int to
	  ssize_t (to match ser_get_buf_len() len-or-error returns)
	* drivers/microsol-common.c: drivers/microsol-common.c: fix
	  comm_receive() from int to size_t
	* drivers/microsol-common.c: drivers/microsol-common.c:
	  save_ups_config(): fix casting of configuration_packet[] entries to
	  (unsigned char) from original types
	* drivers/microsol-common.c: drivers/microsol-common.c: fix byte-
	  sized maths of bitstring_to_binary() and day counts to uint8_t

2021-12-06  Jim Klimov <jim@jimklimov.com>

	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: instcmd():
	  range-check and cast for ups2000_write_register() and
	  handler_func()
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_update_alarm(): range-check and cast all_alarms_len from
	  snprintf() retval
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_update_info(): pragma disable warnings for non-fixed format
	  string
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_update_info(): cast uint32_t for reg-idx
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_read_serial(): range-check and cast ssize_t vs size_t
	  increments
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_update_info(): cast uint8_t calculations of reg_id parts
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_device_identification(): cast uint32_t calculations of
	  ups2000_ident
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_device_identification(): range-check and cast crc16
	  calculations
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_write_registers(), ups2000_read_registers(),
	  ups2000_device_identification(): initialize variables that clang-9
	  is not sure about  Seems like a clang analyzer bug frankly: code
	  starts with a retrying loop that would initialize these variables.
	  But still, adding determinism into code never hurts ;)
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: crc16(): fix
	  casting to uint16_t when bit-shifting
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: ups2000_alarm[]
	  sentinel: fix uint16_t reg from -1 to 0
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c:
	  ups2000_device_identification(): fix r from int to size_t, to match
	  ser_send_buf()
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: fix
	  ups2000_read_serial() from int to size_t, to match ser_get_buf()
	* drivers/huawei-ups2000.c: drivers/huawei-ups2000.c: mark local
	  variables static

2021-12-03  Jim Klimov <jim@jimklimov.com>

	* drivers/microsol-common.c: drivers/microsol-common.c: fix (and
	  range-check) casting for memcpy
	* drivers/microsol-common.c: drivers/microsol-common.c: wrap some
	  long comments
	* drivers/microsol-common.c: drivers/microsol-common.c: include
	  main.h => config.h first
	* common/Makefile.am: common/Makefile.am: limit the use of common.c
	  symlinking from srcdir to builddir only to cases when not
	  BUILDING_IN_TREE
	* tools/nut-scanner/nutscan-init.c: tools/nut-scanner/nutscan-init.c:
	  comment that semaphore gets re-initialized by nut-scanner.c program
	  and why
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nutscan-init.c:
	  tools/nut-scanner/nutscan-init.c + nut-scan.h: hide "semaphore"
	  library variable
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  #include "config.h" first
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/nutscan-init.c, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_xml_http.c:
	  tools/nut-scanner/*.c: fix use of size_t max_threads(_scantype) vs
	  (unsigned int) in sem_init() args
	* tools/nut-scanner/nut-scan.h: tools/nut-scanner/nut-scan.h: fix
	  declaration of nutscan_semaphore(void)
	* drivers/snmp-ups.c, m4/nut_check_libnetsnmp.m4, tools/nut-
	  scanner/nut-scanner.c, tools/nut-scanner/scan_snmp.c:
	  nut_check_libnetsnmp.m4, nut-scanner.c, scan_snmp.c, snmp-ups.c:
	  transition from NETSNMP_DRAFT_BLUMENTHAL_AES_04 (that may be not-
	  defined so #if is invalid) to
	  NUT_HAVE_LIBNETSNMP_DRAFT_BLUMENTHAL_AES_04
	* ci_build.sh: ci_build.sh: in default-all-errors mode, avoid last-
	  loop cleanup if DO_CLEAN_CHECK==no
	* ci_build.sh: ci_build.sh: fix bogus expression for BUILDSTODO
	* ci_build.sh: ci_build.sh: only score *_clean_check as SUCCEEDED if
	  they were not skipped, and report a bit more

2021-11-30  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): import
	  tracing messages and points from 42ITy/DMF fork
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): clarify the
	  "trying the new match_sysoid() method" message
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): fix
	  upsdebugx() levels verbosity to make more sense
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): reformat
	  some debugs, use __func__
	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): report
	  device name (section) and host/IP in progress and errors

2021-11-28  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_check_libpowerman.m4: m4/nut_check_libpowerman.m4: if
	  (lib)powerman.pc is missing, but header is present, check
	  -lpowerman directly
	* m4/nut_check_libpowerman.m4: m4/nut_check_libpowerman.m4: they
	  deliver an empty version string, so we should not error out on that

2021-11-27  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: if libusb-config
	  and libusb.pc are missing, but header is present, check -lusb
	  directly
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: detect
	  NET_SNMP_CONFIG with AC_PATH_PROGS and/or configure option (and
	  handle if it is missing)
	* docs/configure.txt: docs/configure.txt: document --with-net-snmp-
	  config configure option better
	* docs/configure.txt: docs/configure.txt: rephrase comments about
	  --with-*-libs and --with-*-include
	* docs/configure.txt, m4/nut_check_pkgconfig.m4:
	  m4/nut_check_pkgconfig.m4 + docs/configure.txt: detect
	  (dummy_)PKG_CONFIG with AC_PATH_PROGS and/or configure option (and
	  handle if it is missing)
	* m4/nut_check_libgd.m4: m4/nut_check_libgd.m4: initialize empty
	  CFLAGS LIBS LDFLAGS
	* m4/nut_check_libgd.m4: m4/nut_check_libgd.m4: detect GDLIB_CONFIG
	  with AC_PATH_PROGS and/or configure option (and handle if it is
	  missing)
	* docs/configure.txt, m4/nut_check_libusb.m4: m4/nut_check_libusb.m4
	  + docs/configure.txt: detect LIBUSB_CONFIG with AC_PATH_PROGS
	  and/or configure option (and handle if it is missing)
	* m4/nut_check_libpowerman.m4: m4/nut_check_libpowerman.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libwrap.m4: *.m4: AC_LANG_PUSH before AC_LINK_IFELSE
	  and similar tests

2021-11-27  Jim Klimov <jim@jimklimov.com>

	* m4/ax_c___attribute__.m4, m4/nut_check_headers_windows.m4,
	  m4/nut_check_libnetsnmp.m4, m4/nut_func_getnameinfo_argtypes.m4,
	  m4/nut_type_socklen_t.m4: *.m4: AC_LANG_PUSH before
	  AC_COMPILE_IFELSE and similar tests
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: try to report
	  toStringStageCountDump() in ircNotify()
	* configure.ac: configure.ac: AC_LANG_PUSH before AC_COMPILE_IFELSE
	  and similar tests
	* clients/upsclient.c, clients/upslog.c, clients/upsmon.c,
	  clients/upsrw.c, clients/upssched.c, clients/upsset.c,
	  common/state.c, common/upsconf.c, docs/developers.txt,
	  docs/nut.dict, drivers/apcsmart-old.c, drivers/apcsmart.c,
	  drivers/apcupsd-ups.c, drivers/belkin.c, drivers/belkinunv.c,
	  drivers/bestups.c, drivers/clone-outlet.c, drivers/clone.c,
	  drivers/dstate.c, drivers/gamatronic.c, drivers/huawei-ups2000.c,
	  drivers/main.c, drivers/masterguard.c, drivers/mge-utalk.c,
	  drivers/mge-xml.c, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_blazer-common.c,
	  drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-
	  qs.c, drivers/nutdrv_qx_voltronic.c, drivers/oneac.c,
	  drivers/powercom.c, drivers/powerman-pdu.c, drivers/powerp-txt.c,
	  drivers/snmp-ups.c, drivers/tripplite_usb.c, drivers/upscode2.c,
	  drivers/victronups.c, server/conf.c, server/netget.c,
	  server/netlist.c, server/netset.c, server/user.c,
	  tests/cpputest.cpp, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_snmp.c: Replace strcmp() and strcasecmp() use-cases
	  for short fixed string args by strncmp() and strncasecmp()
	  respectively  Some compilers on some OSes complain due to implem
	  nuances. Updated docs/developers.txt to make note for posterity.
	* drivers/microdowell.c: drivers/microdowell.c: some more pragmatic
	  ignorance for CLAMP() macro uses (older clang-3.4 et al)

2021-11-22  Yifeng Li <tomli@tomli.me>

	* drivers/huawei-ups2000.c: huawei-ups2000.c: rework logic for
	  "load.on".  Currently the driver prevents the user from executing
	  "load.on" when the UPS is already on, and reports a
	  STAT_INSTCMD_FAILED with error logs. We need to do this if the UPS
	  is in bypass mode, because the UPS would otherwise enter normal
	  mode - "load.on" is not supposed to do that. On the other hand,
	  executing "load.on" when the UPS is already in "normal-mode on" has
	  no effect, it's still a legal command and should not be rejected
	  arbitrarily, which can potentially confuse downstream applications
	  and users.  It also contains two misleading typos in the error
	  logs: (1) it incorrectly suggests "bypass.off" instead of
	  "bypass.stop", and (2) reports "failed: reason unknown." when the
	  reason is simply an already-on UPS.  This commit allows "load.on"
	  to execute when it's in normal mode and already on, and changes the
	  log messages from errors to warnings. Typos in the log messages are
	  also fixed. The "load.on" command is only rejected in bypass mode,
	  with error logs.  Finally, the logic for the off test is reworked
	  to improve readability. The original code checks whether the UPS is
	  on by testing the negative "not OFF" condition, which is not easy
	  to understand - the reader must have intimate knowledge on the code
	  to know its correctness. Namely, When the UPS power status is
	  updated, 1 of the 5 mutually exclusive flags, OL, OB, OL ECO,
	  BYPASS, or OFF is always set, thus the absence of the OFF flag
	  always reliably indicates an ON status. This commits converts the
	  single negative "not OFF" test to three positive tests for "OL",
	  "OB" and "OFF", with additional comments added on reachable and
	  unreachable conditions. Thus, previous uncertainty is eliminated.

2021-11-26  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix dummy nutscan_scan_xml_http_range()
	  (WITHOUT_NEON) arg type for useconds_t usec_timeout
	* drivers/libhid.c: drivers/libhid.c: fix debug-printing of byte-
	  counts as size_t
	* drivers/microdowell.c: drivers/microdowell.c: some more pragmatic
	  ignorance for CLAMP() macro uses
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c:
	  whitespace fix
	* tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_xml_http.c: tools/nut-scanner/scan_*.c: fix debug-
	  printing of thread accounting as size_t

2021-10-26  Jim Klimov <jim@jimklimov.com>

	* drivers/hidparser.c: drivers/hidparser.c: Parse_ReportDesc(): fix
	  "max" to size_t and "id" to uint8_t, to match struct fields
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix cast of range-
	  checked u_langid_fix
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix cast of return
	  types to size_t vs int
	* drivers/libhid.c: drivers/libhid.c: string_to_path(): range-check
	  and cast converted values for path->Node[]
	* drivers/libhid.c: drivers/libhid.c: hid_lookup_usage(): fix cast of
	  usage_code for printing and returning
	* drivers/libhid.c: drivers/libhid.c: string_to_path(): check for
	  type overflow, and cast
	* drivers/libhid.c: drivers/libhid.c: fix types for iterating vs
	  rbuflen from int to size_t
	* drivers/libhid.c, drivers/libhid.h: drivers/libhid.{c,h}: fix
	  interrupt_size from int to size_t
	* drivers/libhid.c: drivers/libhid.c: fix types for iterating vs
	  rbuflen from int to size_t
	* drivers/libhid.c, drivers/libhid.h: drivers/libhid.{c,h}: fix
	  max_report_size from int to size_t
	* drivers/libhid.c: drivers/libhid.c: file_report_buffer(): fix
	  buflen from int to size_t
	* drivers/hidtypes.h: drivers/hidtypes.h: change HIDDesc_t.replen[]
	  from (array of) int to size_t
	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: cast for
	  bit math for qx_status() result
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c: cast
	  for bit math for qx_status() result, and line-wrap a long message
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: cast arg for
	  upsdebug_hex() to size_t
	* drivers/nutdrv_qx_voltronic-qs-hex.c: drivers/nutdrv_qx_voltronic-
	  qs-hex.c: cast arg for upsdebug_hex() to size_t
	* drivers/libusb.c: drivers/libusb.c: libusb_open(): cast rdlen to
	  unsigned to match usb_control_msg() where it is safe to do so
	* drivers/libhid.h: drivers/libusb.h: change reportbuf_t.len[] from
	  (array of) int to size_t
	* drivers/hidparser.c, drivers/hidtypes.h: drivers/hidtypes.h +
	  hidparser.c: change HIDDesc_t.nitems from int to size_t
	* drivers/hidparser.c: drivers/hidparser.c: cast int types to
	  explicit conversions where safe

2021-10-04  Jim Klimov <jim@jimklimov.com>

	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: process(): fix int
	  types
	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: upsdrv_initups(): fix
	  type of port
	* drivers/nutdrv_qx.h: drivers/nutdrv_qx.h: define QX_FLAG_* macros
	  as typed numbers (UL) to match item_t->qxflags
	* drivers/powercom-hid.c: drivers/powercom-hid.c: range-check and
	  cast uint16_t values for ups delays
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: align return
	  type of usb_interrupt_read() and our upsdebug_hex() args
	* drivers/upscode2.c: drivers/upscode2.c: align types of two statuses
	* drivers/upscode2.c: drivers/upscode2.c: fix useconds_t
	  output_pace_usec
	* drivers/upscode2.c: drivers/upscode2.c: fix speed_t baud var
	* drivers/upscode2.c: drivers/upscode2.c: fix ssize_t ret for ser*()
	  routines
	* drivers/powerp-txt.c: drivers/powerp-txt.c: fix ssize_t ret for
	  ser*() routines
	* drivers/powerp-bin.c: drivers/powerp-bin.c: fix ssize_t ret for
	  ser*() routines, and cmd len
	* drivers/powerpanel.h: drivers/powerpanel.h: adjust powerpanel
	  subdriver_t funcptr type for initups()
	* drivers/ivtscd.c: drivers/ivtscd.c: fix ssize_t for ivt_status()
	  and ser_*() involved
	* drivers/riello_ser.c: drivers/riello_ser.c: riello_instcmd(): fix
	  int type of delay vs atoi()
	* drivers/riello_ser.c: drivers/riello_ser.c: fix ssize_t ret for
	  read() routines
	* drivers/riello_usb.c: drivers/riello_usb.c: ussleep(): fix
	  useconds_t type
	* drivers/riello_usb.c: drivers/riello_usb.c: riello_instcmd(): fix
	  int type of delay vs atoi()
	* drivers/riello_usb.c: drivers/riello_usb.c: Get_USB_Packet(): fix
	  int type of size
	* drivers/riello.c: drivers/riello.c: riello_parse_rc(): cast uint8_t
	  into char
	* drivers/riello.c: drivers/riello.c: riello_prepare*(): cast
	  delay%256 into uint8_t
	* drivers/riello.c: drivers/riello.c: riello_parse_sentr(): cast pom
	  maths into uint16_t explicitly... range-check missing though
	* drivers/riello.c: drivers/riello.c: riello_parse_sentr(): cast
	  uint8_t => char to construct Version byte by byte
	* drivers/riello.c: drivers/riello.c: riello_parse_gn(): range-check
	  and cast the NomPowerKVA / NomPowerKW
	* drivers/riello.c: drivers/riello.c: riello_calc_CRC(): clarify and
	  cast the bitness magic as needed
	* drivers/powercom.c: drivers/powercom.c: fix int type of model vars
	  to match OPTImodels/BNTmodels/KINmodels/IMPmodels arrays
	* drivers/powercom.c: drivers/powercom.c: avoid casting via wrong int
	  type for termios fields
	* drivers/powercom.c, drivers/powercom.h: drivers/powercom.{c,h}:
	  align int size for delay (min, sec) and ser_send_char() sending a
	  char
	* drivers/tripplite.c: drivers/tripplite.c: fix casting of unsigned
	  delays from atoi()
	* drivers/tripplite.c: drivers/tripplite.c: fix casting of ints in
	  send_cmd()
	* drivers/tripplitesu.c: drivers/tripplitesu.c: fix casting of ints
	  into unsigned min/max high/low transfer values
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  hide warnings for intentional variable format string use
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  avoid a few potential uninitialized uses
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  fix a case of shadowed vars in a clause
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  declare local vars and funcs as static
	* drivers/netxml-ups.c: drivers/netxml-ups.c: fix casting ssize_t
	  value up to size_t for ne_buffer_append() args
	* drivers/netxml-ups.c: drivers/netxml-ups.c: fix int type of port
	  for ne_sock_connect() args

2021-09-28  Jim Klimov <jim@jimklimov.com>

	* drivers/microdowell.c: drivers/microdowell.c: shuffle include-file
	  order
	* drivers/microdowell.c: drivers/microdowell.c: instcmd(): casting
	  and (pragma-hushed) range checks for "delay"
	* drivers/solis.c: drivers/solis.c: convert_days(): limit the range
	  for safe casting to size_t for memcpy()
	* drivers/rhino.c: drivers/rhino.c: align int types in send_command()
	* drivers/microsol-common.c, drivers/microsol-common.h:
	  drivers/microsol-common.{c,h}: mark local variables as static;
	  expose a few reasonable ones as extern
	* drivers/microdowell.c, drivers/microdowell.h:
	  drivers/microdowell.{c,h}: fix size_t lengths and uint16_t/uint32_t
	  status bitmasks
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  declare upsdrv_shutdown() as noreturn
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  declare file-local variables static
	* drivers/hidparser.c: drivers/hidparser.c: avoid shadowed local
	  variables in HIDParse()
	* drivers/hidparser.c: drivers/hidparser.c: fix Value cast in
	  FormatValue()
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix status_mask to
	  unsigned int for STATUS() and bitmask maths
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: fix parsing of
	  interrupt_size from args, and error out on invalid inputs
	* drivers/nutdrv_siemens_sitop.c: drivers/nutdrv_siemens_sitop.c: fix
	  counters to unsigned int
	* drivers/mge-hid.c, drivers/usbhid-ups.c, drivers/usbhid-ups.h:
	  drivers/usbhid-ups.{c,h} + mge-hid.c: fix ups_status from int to
	  "unsigned" to match the STATUS() macro and bitmask maths
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  type for snmp_sess.timeout assignment
	* drivers/microsol-apc.h: drivers/microsol-apc.h: align type of
	  NOMINAL_POWER[] to int, like nominal_power var in microsol-common.h
	* drivers/oneac.c: drivers/oneac.c: fix buf sizes to size_t
	* drivers/main.c, drivers/main.h, drivers/mge-utalk.c,
	  drivers/nutdrv_siemens_sitop.c, drivers/usbhid-ups.c:
	  drivers/main.{c,h} et al: fix poll_interval to be time_t like the
	  time() it has maths with
	* drivers/main.c: drivers/main.c: allow only positive pollinterval
	  settings (avoid DoS by crazy loop)
	* drivers/main.c: drivers/main.c: report and fail with invalid
	  pollinterval settings
	* drivers/serial.c: drivers/serial.c: after some investigation of
	  standards, we may cast useconds_t=>suseconds_t
	* server/netset.c: server/netset.c: log tracking_disable() result to
	  find a use for it (warning fix)
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c:
	  execute_and_retrieve_query(): fix int casting and add diags pragmas
	  for range checks
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: get_answer(): fix int
	  casting for tail; fix redundant comparison
	* drivers/bestfortress.c: drivers/bestfortress.c: simplify
	  usleep(d_usec) to no casting
	* drivers/belkin.c: drivers/belkin.c: comment why casting usleep(cnt)
	  is okay

2021-09-27  Jim Klimov <jim@jimklimov.com>

	* clients/upsclient.c, common/common.c, docs/new-drivers.txt,
	  drivers/serial.c, drivers/serial.h, include/common.h:
	  include/common.h, drivers/serial.{c,h}, docs/new-drivers.txt,
	  common/common.c, clients/upsclient.c: fix d_sec long => time_t to
	  match timeval struct fields
	* clients/upsclient.c, common/common.c, include/common.h:
	  include/common.h, common/common.c, clients/upsclient.c: fix
	  select_read()/select_write(): long d_usec => suseconds_t
	* docs/nut.dict: docs/nut.dict: update for new-drivers.txt revision
	* docs/new-drivers.txt: docs/new-drivers.txt: align USB-common
	  structure and method signature descriptions with current
	  drivers/*usb*.h
	* docs/man/upscli_readline.txt, docs/man/upscli_sendline.txt:
	  docs/man/upscli_readline.txt + upscli_sendline.txt: update method
	  arguments to match code (timeout unsigned int => const long)
	* docs/man/upscli_list_next.txt, docs/man/upscli_list_start.txt:
	  docs/man/upscli_list_start.txt + upscli_list_next.txt: update
	  method arguments to match code (numa/numq unsigned int => size_t)

2021-09-26  Jim Klimov <jim@jimklimov.com>

	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: fix data types for
	  alarm() and sleep()
	* drivers/mge-utalk.c: drivers/mge-utalk.c: fix int casting to
	  snprintf() (size_t/ssize_t)
	* drivers/mge-utalk.c: drivers/mge-utalk.c: fix int casting to
	  ser_get*()/ser_send_*() (size_t/ssize_t)
	* drivers/metasys.c: drivers/metasys.c: fix int casting to
	  ser_get*()/ser_send_*() (size_t/ssize_t)
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: fix int casting to
	  ser_get*() (size_t/ssize_t)
	* drivers/gamatronic.c: drivers/gamatronic.c: fix int casting to
	  ser_get*() (size_t/ssize_t) and unify naming of msg(_)len
	* drivers/bestups.c: drivers/bestups.c: fix int casting to ser_get*()
	  (size_t/ssize_t)
	* drivers/bestuferrups.c: drivers/bestuferrups.c: fix int casting to
	  ser_get*() (size_t/ssize_t)
	* drivers/bestfortress.c: drivers/bestfortress.c: fix int casting to
	  ser_get*() (size_t/ssize_t)
	* drivers/bestfcom.c: drivers/bestfcom.c: fix int casting to
	  ser_get*() (size_t/ssize_t)
	* drivers/belkinunv.c: drivers/belkinunv.c: fix int casting to
	  ser_get*(), read() and write() (size_t/ssize_t)
	* drivers/belkin.c: drivers/belkin.c: fix int casting to ser_get*()
	  (size_t/ssize_t)
	* drivers/al175.c: drivers/al175.c: fix raw_data_t::buf_size and
	  io_head_t::addr,len to size_t
	* drivers/al175.c: drivers/al175.c: fix int casting to ser_get*()
	  (size_t/ssize_t)
	* drivers/dstate.c: drivers/dstate.c: augment range check when using
	  size_t as int
	* drivers/dstate.c: drivers/dstate.c: fix int casting to read() and
	  write(), add range checks for bytes written (size_t/ssize_t)

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: fix elapsed_time type
	  and casting
	* drivers/bcmxcp.c, drivers/bcmxcp_io.h, drivers/bcmxcp_ser.c,
	  drivers/bcmxcp_usb.c: drivers/bcmxcp*.{c,h}: fix types involved
	  with read() and write() to ssize_t
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: fix count to size_t
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c: fix
	  buf_size to size_t
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: fix types involved with read() and
	  write() to ssize_t
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: fix size_t thread_count and its
	  iterator
	* drivers/serial.c, drivers/serial.h: drivers/serial.[h,c]: fix
	  d_usec from long to useconds_t
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_xml_http.c:
	  tools/nut-scanner/*.[h,c]: fix usec_timeout from long to useconds_t
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix size_t thread_count and its iterator
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix recv_size use as size_t parameter
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/scan_xml_http.c:
	  tools/nut-scanner/nut-scan.h + scan_xml_http.c: fix port type to
	  uint16_t
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  arg type for generate_Ku()
	* drivers/apc-hid.c, drivers/bcmxcp_usb.c, drivers/belkin-hid.c,
	  drivers/blazer_usb.c, drivers/cps-hid.c, drivers/delta_ups-hid.c,
	  drivers/idowell-hid.c, drivers/liebert-hid.c, drivers/mge-hid.c,
	  drivers/nutdrv_atcl_usb.c, drivers/openups-hid.c, drivers/powercom-
	  hid.c, drivers/powervar-hid.c, drivers/richcomm_usb.c,
	  drivers/riello_usb.c, drivers/tripplite-hid.c,
	  drivers/tripplite_usb.c, drivers/usb-common.c, drivers/usb-
	  common.h: drivers/usb-common.{c,h} drivers/*{usb,hid}.c: fix type
	  of usb_device_id_t vendorID/productID to uint16_t  * usb-common.h:
	  fix the definition * *{usb,hid}.c: sentinel in a table of uint16_t
	  can not be -1 * usb-common.c: uint16_t for vendor and product --
	  change sentinel matcher for full (0,0,NULL) hits
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/scan_xml_http.c:
	  32-bit IPv4 addr mask should be uint32_t not int
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/scan_xml_http.c:
	  32-bit IPv4 addr should be uint32_t not int

2021-10-12  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  safety-check and cast use of small mask_byte values

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c: use
	  platform-dependent getnameinfo() argument types
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  size_t thread_count and its iterator
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: fix
	  size_t thread_count and its iterator
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: fix
	  size_t buf_size
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: align
	  upscli_*() numa and numq args from "unsigned int" to "size_t", to
	  match PCONF_CTX_t fields
	* server/upsd.c: server/upsd.c: fix comparisons of nfds_t maxconn,
	  long sysconf() and size_t malloc()
	* server/upsd.c: server/upsd.c: check if maxconn<1 to avoid
	  signedness issues and because zero connections are also useless
	* server/upsd.c: server/upsd.c: align use of nfds_t vs. long
	  (maxconn) for GCC "-Wtype-limits"

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* server/sstate.c: server/sstate.c: fix missed include
	* server/conf.c, server/upsd.c, server/upsd.h: server/upsd.c +
	  conf.c: align use of nfds_t vs. long (maxconn)
	* server/upsd.c: server/upsd.c: align use of uint8_t when
	  constructing an UUID
	* clients/upsclient.c, server/netssl.c: server/netssl.c +
	  clients/upsclient.c: fix ssl_error() to use ssize_t "ret"
	* server/sstate.c: server/sstate.c: fix int casting to read() and
	  write(), add range checks for bytes written (size_t/ssize_t)
	* clients/upsc.c, clients/upsclient.c, clients/upsclient.h,
	  clients/upscmd.c, clients/upsimage.c, clients/upslog.c,
	  clients/upsmon.c, clients/upsrw.c, clients/upsset.c,
	  clients/upsstats.c, docs/man/upscli_get.txt, drivers/dummy-ups.c:
	  clients/upsclient.h and numerous *.c: align upscli_get(),
	  upscli_list_start(), upscli_list_next() numa and numq args from
	  "unsigned int" to "size_t", to match PCONF_CTX_t fields
	* clients/upsmon.c: clients/upsmon.c: fix int casting to read() and
	  write(), add separate retval processing from system()
	* clients/upssched.c: clients/upssched.c: fix int casting to read()
	  and write(), add range checks for bytes written (size_t/ssize_t)
	* clients/upsclient.c: clients/upsclient.c: fix receiver of strtol(),
	  and log a FIXME for sanity checks
	* clients/upsmon.c: clients/upsmon.c: fix receiver of strtol()
	* clients/upssched.c: clients/upssched.c: fix receiver of strtol()
	* clients/upsmon.c: clients/upsmon.c: fix int type for use of
	  upscli_readline()
	* clients/upscmd.c: clients/upscmd.c: fix int type for use of
	  upscli_readline()
	* clients/upsimage.c: clients/upsimage.c: fix int casting
	* clients/upsrw.c: clients/upsrw.c: fix receiver of strtol()
	* drivers/nutdrv_qx.c, server/netset.c: server/netset.c +
	  drivers/nutdrv_qx.c: fix consumers of "long" getaux()
	* common/str.c: common/str.c: fix buffer int length in str_to_*int*()
	  methods
	* common/state.c, include/state.h, server/sstate.c, server/sstate.h:
	  common/state.c + server/sstate.c + *.h: aux field is a "long" so
	  getaux() should return long
	* common/common.c, include/common.h: common/common.c: fix use of a
	  pid_t value

2021-11-25  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: typo fix for ABS_TOP_* determination

2021-11-25  Jim Klimov <jimklimov@gmail.com>

	* docs/FAQ.txt: Update FAQ.txt  Update rationale (reasonable use-
	  cases) for "clone" driver

2021-11-25  Jim Klimov <jimklimov+nut@gmail.com>

	* common/Makefile.am, configure.ac: configure.ac +
	  common/Makefile.am: detect if building in-tree and differentiate
	  the recipe involving common.c based on that
	* common/Makefile.am: common/Makefile.am: let OpenBSD 6.4 make cope
	  with common.c recipe
	* docs/config-prereqs.txt: docs/config-prereqs.txt: add libusb1 for
	  OpenBSD
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  concerns about OpenBSD 6.4 freeipmi vs. "-largp"

2021-11-25  Jim Klimov <jim@jimklimov.com>

	* NEWS, docs/nut.dict: NEWS: added new salicru-hid subdriver in
	  usbhid-ups for NUT v2.7.5

2021-11-25  xbgmsharp <xbgmsharp@gmail.com>

	* drivers/salicru-hid.c: Rename unmapped.* to experimental.* data
	  points Add untested instant commands

2021-11-24  xbgmsharp <xbgmsharp@gmail.com>

	* drivers/salicru-hid.c: Update mapping

2021-11-23  Jim Klimov <jim@jimklimov.com>

	* docs/FAQ.txt: docs/FAQ.txt: extend Q&A on "NUT proxying" with
	  mention of "clone" driver

2021-11-22  xbgmsharp <xbgmsharp@gmail.com>

	* data/driver.list.in, drivers/Makefile.am, drivers/salicru-hid.c,
	  drivers/salicru-hid.h, drivers/usbhid-ups.c,
	  scripts/upower/95-upower-hid.rules: Initial release for Salicru
	  driver
	* data/driver.list.in, drivers/Makefile.am, drivers/salicru-hid.c,
	  drivers/salicru-hid.h, drivers/usbhid-ups.c,
	  scripts/upower/95-upower-hid.rules: Initial release for Salicru
	  driver

2021-11-22  Yifeng Li <tomli@tomli.me>

	* docs/nut.dict: docs/nut.dict: add model name "KRTS".
	* docs/man/huawei-ups2000.txt: huawei-ups2000.txt: update tested
	  models and user report suggestions.
	* docs/man/huawei-ups2000.txt: huawei-ups2000.txt: minor typo fixes

2021-11-22  Jim Klimov <jimklimov@gmail.com>

	* docs/FAQ.txt: Update docs/FAQ.txt  Add example of dummy-ups (relay
	  mode) configuration section  Co-authored-by: Helmut K. C. Tessarek
	  <tessarek@evermeet.cx>

2021-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups.{c,h}:
	  typedef snmp_info_t::flags and define its PRI_SU_FLAGS format to
	  ease type changes later  Also adds a "default:" to case for
	  template flag handling (from FTY fork)

2021-11-22  Jim Klimov <jim@jimklimov.com>

	* docs/FAQ.txt: docs/FAQ.txt: update for interactions via github
	  (issues, PRs, ...)
	* docs/FAQ.txt: docs/FAQ.txt: update for use-cases of dummy-ups in
	  relay mode

2021-11-20  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: Make end of log useful for spellcheck
	  failure handling

2021-11-20  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  add a chapter on OpenBSD build agent setup
	* configure.ac: configure.ac: require at least autoconf-2.61 (macros
	  are used that are missing in 2.60 and before)
	* autogen.sh: autogen.sh: comment that libtool is also needed
	* autogen.sh: autogen.sh: comment about envs that want
	  AUTOCONF_VERSION or AUTOMAKE_VERSION
	* autogen.sh, configure.ac, scripts/augeas/.gitignore,
	  scripts/devd/Makefile.am, scripts/udev/.gitignore,
	  scripts/udev/Makefile.am: autogen.sh + configure.ac: try to support
	  building on systems without Python or Perl

2021-11-22  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/mge-xml.c: Eaton XML/PDC: add External Battery Module count

2021-11-16  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups-helpers.c: drivers/snmp-ups-helpers.c: reshuffle
	  includes
	* drivers/snmp-ups.c: drivers/snmp-ups.c: include main.h => common.h
	  => config.h first
	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix strncmp() limits for
	  "v1" and "v3" checks (copy-pasting typo)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: mention in help that SNMP
	  version may be "v3"
	* drivers/libusb1.c: drivers/libusb1.c: fix devcount and devnum from
	  ssize_t to size_t

2021-11-15  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  printf() assumes floating-point numbers are doubles, satisfy its
	  warnings
	* drivers/libusb1.c: drivers/libusb1.c: drop extra "int i" definition
	* ci_build.sh: ci_build.sh: NUT_USB_VARIANT=<value> => --with-
	  usb=libusb<value> [libusb-1.0+0.1 branch]
	* ci_build.sh: ci_build.sh: NUT_USB_VARIANT=no => --without-usb
	  explicitly
	* ci_build.sh: ci_build.sh: default-all-errors: report
	  BUILDSTODO_INITIAL at the end of log, and if non-zero BUILDSTODO
	  remained unaccounted
	* ci_build.sh: ci_build.sh: report which SSL/USB variants will be
	  looped
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  use a longer global var name for modbus_ctx (nee ctx)
	* drivers/bcmxcp_ser.c, drivers/bcmxcp_ser.h, tools/nut-
	  scanner/scan_eaton_serial.c: drivers/bcmxcp_ser.{c,h} + tools/nut-
	  scanner/scan_eaton_serial.c: use longer global var name (AUT =>
	  BCMXCP_AUTHCMD)
	* drivers/bestfortress.c: drivers/bestfortress.c: comment an
	  analyzer-check complaint
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: avoid useless
	  comparison (warning)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: only define
	  "Compatibility layer between libusb 0.1 and 1.0" if we build with
	  QX_USB at all (no required headers are in context otherwise)
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts for SSL+USB are planned same as executed - and
	  handle explicit NUT_USB_VARIANTS=no
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts for SSL+USB are planned same as executed
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts are decremented when configuration failed
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": between
	  configure and build, report the Configured NUT_USB_VARIANT
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": between
	  configure and build, report the Configured NUT_SSL_VARIANT
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": support
	  looping over NUT_USB_VARIANTS as well
	* drivers/libhid.c: drivers/libhid.c: HIDDumpTree(): mark that arg
	  "hd" is not used in SHUT_MODE
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: the "additional
	  USB-related checks" should now manipulate "LIBS" not "LIBUSB_LIBS"
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: comment on
	  "additional USB-related checks"
	* m4/nut_check_libusb.m4: Move "additional USB-related checks" from
	  configure.ac to m4/nut_check_libusb.m4
	* drivers/nutdrv_qx.c: [libusb-1.0] Realign buffer casting to
	  (usb_ctrl_char) after merge from master
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  merge conflict [libusb-1.0+0.1]
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: complete the merge
	  from master to libusb-1.0+0.1
	* ci_build.sh: ci_build.sh: NUT_USB_VARIANT=no => --without-usb
	  explicitly
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: fix definition of
	  curDevice (libusb-1.0)
	* ci_build.sh: ci_build.sh: default-all-errors: report
	  BUILDSTODO_INITIAL at the end of log, and if non-zero BUILDSTODO
	  remained unaccounted
	* ci_build.sh: ci_build.sh: default-all-errors: report
	  BUILDSTODO_INITIAL at the end of log, and if non-zero BUILDSTODO
	  remained unaccounted
	* ci_build.sh: ci_build.sh: report which SSL/USB variants will be
	  looped

2018-03-14  Daniele Pezzini <hyouko@gmail.com>

	* data/cmdvartab, docs/nut-names.txt: libusb: update example of
	  driver.version.usb and add it to cmdvartab

2021-11-15  François-Régis Degott <francoisregisdegott@eaton.com>

	* drivers/eaton-ats16-nm2-mib.c: eaton-ats16-nm2-mib.c: fix mul coef.
	  for ambient.temperature and humidity (#1173)  * eaton-
	  ats16-nm2-mib.c: fix mul coef. for ambient.temperature and
	  ambient.humidity  * Update eaton-ats16-nm2-mib.c  Co-authored-by:
	  Arnaud Quette <arnaud.quette@gmail.com>

2021-11-15  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": between
	  configure and build, report the Configured NUT_SSL_VARIANT
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts are decremented when configuration failed
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: avoid useless
	  comparison (warning)
	* drivers/bestfortress.c: drivers/bestfortress.c: comment an
	  analyzer-check complaint
	* drivers/bcmxcp_ser.c, drivers/bcmxcp_ser.h, tools/nut-
	  scanner/scan_eaton_serial.c: drivers/bcmxcp_ser.{c,h} + tools/nut-
	  scanner/scan_eaton_serial.c: use longer global var name (AUT =>
	  BCMXCP_AUTHCMD)
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  use a longer global var name for modbus_ctx (nee ctx)
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  use a longer global var name for modbus_ctx (nee ctx)
	* drivers/bcmxcp_ser.c, drivers/bcmxcp_ser.h, tools/nut-
	  scanner/scan_eaton_serial.c: drivers/bcmxcp_ser.{c,h} + tools/nut-
	  scanner/scan_eaton_serial.c: use longer global var name (AUT =>
	  BCMXCP_AUTHCMD)
	* drivers/bestfortress.c: drivers/bestfortress.c: comment an
	  analyzer-check complaint
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: avoid useless
	  comparison (warning)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: only define
	  "Compatibility layer between libusb 0.1 and 1.0" if we build with
	  QX_USB at all (no required headers are in context otherwise)
	* configure.ac: configure.ac: neuter "nut_usb_lib" if building
	  --without-usb
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts for SSL+USB are planned same as executed - and
	  handle explicit NUT_USB_VARIANTS=no
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts for SSL+USB are planned same as executed
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": ensure
	  BUILDSTODO counts are decremented when configuration failed
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": between
	  configure and build, report the Configured NUT_USB_VARIANT
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": between
	  configure and build, report the Configured NUT_SSL_VARIANT
	* ci_build.sh: ci_build.sh: BUILD_TYPE="default-all-errors": support
	  looping over NUT_USB_VARIANTS as well
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: report a NOTICE if
	  libusb-1.0 support was detected, but another was chosen
	* drivers/libhid.c: drivers/libhid.c: HIDDumpTree(): mark that arg
	  "hd" is not used in SHUT_MODE
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: the "additional
	  USB-related checks" should now manipulate "LIBS" not "LIBUSB_LIBS"
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: comment on
	  "additional USB-related checks"
	* configure.ac, m4/nut_check_libusb.m4: Move "additional USB-related
	  checks" from configure.ac to m4/nut_check_libusb.m4
	* configure.ac, docs/configure.txt, m4/nut_check_libusb.m4:
	  m4/nut_check_libusb.m4 et al: add support for --with-libusb-
	  version=(auto|0.1|1.0)
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: restore "ret" lost in
	  merging
	* drivers/riello_usb.c: drivers/riello_usb.c: properly export
	  variables shared between driver subtypes (reapply to libusb-1.0
	  branch)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: add a bit more of
	  "Compatibility layer between libusb 0.1 and 1.0"
	* drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c: [libusb-1.0] Realign use of
	  nut_usb_strerror() after merge from master
	* drivers/libusb1.c, drivers/nutdrv_qx.c: [libusb-1.0] Realign buffer
	  casting to (usb_ctrl_char) after merge from master

2021-11-13  Dan Benton <dan@dogsbody.com>

	* data/driver.list.in: Add CyberPower RMCARD205 which is supported

2021-11-13  Jim Klimov <jimklimov+nut@gmail.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: hide clang-3.4 warnings
	  about str{n}cmp() args into pragmas
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: detect general "-Warray-
	  bounds" support
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: detect general
	  "-Wtautological-compare"
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: detect "pragma clang
	  diagnostic push/pop" support (needed with older clang versions not
	  on par with GCC)
	* drivers/snmp-ups-helpers.c: drivers/snmp-ups-helpers.c: include
	  "config.h" before any system headers (such as time.h indirectly)
	* configure.ac: configure.ac: be sure to detect "time.h"
	* ci_build.sh: ci_build.sh: support a common DO_CLEAN_CHECK=no

2021-11-13  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups-helpers.c: drivers/snmp-ups-helpers.c: include a
	  header, avoid a warning
	* UPGRADING, docs/nut.dict: NEWS: updated build against various
	  generations of Net-SNMP for NUT v2.7.5
	* docs/configure.txt, m4/nut_check_libnetsnmp.m4:
	  m4/nut_check_libnetsnmp.m4: allow --with-netsnmp-config(=yes) to
	  mean prefer_NET_SNMP_CONFIG=true
	* NEWS: NEWS: updated build against various generations of FreeIPMI
	  for NUT v2.7.5
	* drivers/snmp-ups.c: drivers/snmp-ups.c: replace strcmp("short
	  string") with strncmp() (clang-3.4 warns about array out of bounds)
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: resolve a "tautological
	  compare" when building on older agents
	* drivers/nut-ipmi.h, drivers/nut-ipmipsu.c, drivers/nut-
	  libfreeipmi.c: drivers/nut-libfreeipmi.c nut-ipmipsu.c nut-ipmi.h:
	  adjust input_voltage_range_t (args of
	  ipmi_fru_multirecord_power_supply_information() vs.
	  ipmi_fru_parse_multirecord_power_supply_information() in different
	  FreeIPMI releases) [issue #1175]
	* drivers/Makefile.am: drivers/Makefile.am: disable quick-hack of
	  nut_ipmipsu_CFLAGS+="-Wno-pointer-sign" [issue #1175]
	* m4/nut_check_libusb.m4: m4/nut_check_libusb.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libopenssl.m4: m4/nut_check_libopenssl.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libnss.m4: m4/nut_check_libnss.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libneon.m4: m4/nut_check_libneon.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libmodbus.m4: m4/nut_check_libmodbus.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libgd.m4: m4/nut_check_libgd.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libfreeipmi.m4: m4/nut_check_libfreeipmi.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_libavahi.m4: m4/nut_check_libavahi.m4: consider
	  have_PKG_CONFIG
	* m4/nut_check_pkgconfig.m4: m4/nut_check_pkgconfig.m4: separate
	  detection of support for have_PKG_CONFIG vs have_PKG_CONFIG_MACROS
	* configure.ac: configure.ac: call PKG_CONFIG for systemd settings
	  query only if we have_PKG_CONFIG, and die if "yes" was required but
	  query is not possible
	* m4/nut_check_pkgconfig.m4: m4/nut_check_pkgconfig.m4: extend to
	  consider PKG_CONFIG possibly detected by autoconf
	* configure.ac, m4/nut_check_pkgconfig.m4: configure.ac: evict
	  NUT_CHECK_PKGCONFIG into m4/nut_check_pkgconfig.m4
	* clients/upsmon.c, drivers/mge-utalk.c, drivers/snmp-ups.c,
	  tools/nut-scanner/scan_snmp.c: clients/upsmon.c tools/nut-
	  scanner/scan_snmp.c drivers/snmp-ups.c mge-utalk.c: avoid
	  strcmp("") as the implementation may be invalid (reaches out of
	  one-element array for "")
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: whitespace
	  fix (indent if-clause content)

2021-11-12  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: support
	  (and prefer) pkg-config info to net-snmp-config script(s)
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: separate
	  "distcheck-valgrind" from "default-nodoc", to filter away
	  "NUT_BUILD_CAPS=valgrind=no" agents

2021-11-13  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: update guessing SYS_PKG_CONFIG_PATH for
	  *openindiana*|*omnios*|*solaris*|*illumos*|*sunos*
	* ci_build.sh: ci_build.sh: for optional_maintainer_clean_check(),
	  ignore ".ci*.log*" files if present

2021-11-12  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: report which PWD failed a "git status"
	  query
	* ci_build.sh: ci_build.sh: report if ".git" disappeared during
	  *clean check [issue #1167]

2021-11-11  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.h: drivers/snmp-ups.h: fix remaining SU_* flag
	  bits to (unsigned long), to match snmp_info_t->flags type
	* drivers/snmp-ups.h: drivers/snmp-ups.h: comment SU_* bit usage by
	  bit-shifting macros
	* drivers/snmp-ups.h: drivers/snmp-ups.h: wrap long comments, and
	  detail where flag-field bits come from
	* drivers/snmp-ups.h: drivers/snmp-ups.h: comment typical use of
	  SU_TYPE(t) macro
	* drivers/snmp-ups.h: drivers/snmp-ups.h: fix SU_TYPE_DAISY(t) macro
	  (had no arg)
	* drivers/snmp-ups.h: drivers/snmp-ups.h: whitespace fixes
	* drivers/snmp-ups.h: drivers/snmp-ups.h: comment SU_STATUS_NUM_ELEM
	  as possibly obsolete

2021-10-27  Jim Klimov <jimklimov@gmail.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix buffer size to possibly
	  print max size_t

2021-10-26  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups.{c,h}: fix
	  SU_FLAG_* to (unsigned long) and their usage, to match
	  snmp_info_t->flags type
	* drivers/snmp-ups.c: drivers/snmp-ups.c: decode_str(): range-check
	  return of snprintf()

2021-11-11  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  rearrange lines to better match with 42ITy fork
	* NEWS, docs/nut.dict: NEWS: improved SNMPv3 Auth/Priv algo support,
	  and nut-scanner threadcount, for NUT v2.7.5

2021-11-10  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am: hotfix header
	  (in)compatibility of different IPMI versions
	* drivers/Makefile.am: drivers/Makefile.am: hotfix header
	  (in)compatibility of different IPMI versions
	* drivers/Makefile.am: drivers/Makefile.am: hotfix header
	  (in)compatibility of different IPMI versions
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: hunnox_step is only used
	  qith QX_USB
	* drivers/bcmxcp_usb.c, drivers/libusb.h, drivers/nutdrv_atcl_usb.c,
	  drivers/nutdrv_qx.c, drivers/richcomm_usb.c,
	  drivers/tripplite_usb.c: drivers/*usb*: align whitespace changes
	  with libusb-1.0 branch
	* drivers/Makefile.am: drivers/Makefile.am: use LIBUSB_IMPL macro to
	  align with libusb-1.0 branch
	* drivers/libusb.c: drivers/libusb.c: whitespace fixes and message
	  fixes to align with libusb-1.0 branch
	* drivers/libusb.c, drivers/libusb.h, drivers/powervar-hid.c,
	  drivers/usbhid-ups.c: drivers/libusb.{c,h} + powervar-hid.c +
	  usbhid-ups.c: whitespace fixes after PR #1044
	* docs/config-prereqs.txt: docs/config-prereqs.txt: mention further
	  I2C-related packages in Debian/Ubuntu distros
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, report the
	  start of build variant and how many remain
	* Makefile.am, clients/Makefile.am, common/Makefile.am,
	  conf/Makefile.am, data/Makefile.am, data/html/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  drivers/Makefile.am, include/Makefile.am, lib/Makefile.am,
	  scripts/Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/augeas/Makefile.am, scripts/devd/Makefile.am,
	  scripts/hotplug/Makefile.am, scripts/python/Makefile.am,
	  scripts/systemd/Makefile.am, scripts/udev/Makefile.am,
	  scripts/ufw/Makefile.am, scripts/upsdrvsvcctl/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/Makefile.am,
	  tools/nut-scanner/Makefile.am: */Makefile.am: ensure that `make
	  maintainer-clean` also removes .dirstamp files
	* .gitignore: .gitignore: remove a redundancy
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, ignore
	  strange exit-code from `expr` - if the maths result was "0"
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, ignore
	  strange exit-code from `expr`
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, do not
	  distclean before build (this just spends time to generate the
	  Makefile to kill it)
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, report
	  "SUCCEEDED build(s)" after final optional_maintainer_clean_check()
	  if that is called
	* ci_build.sh: ci_build.sh: dumb down can_clean_check() to pass "set
	  -e" shells
	* ci_build.sh: ci_build.sh: optional_*_clean_check() quickly skip if
	  there is no Makefile
	* ci_build.sh: ci_build.sh: in "default-all-errors" mode, count
	  expected/remaining BUILDSTODO and call
	  optional_maintainer_clean_check() for the last iteration and
	  optional_dist_clean_check() for others
	* ci_build.sh: ci_build.sh: introduce can_clean_check() to not fail
	  when we have nothing to test against

2021-11-09  Jim Klimov <jimklimov+nut@gmail.com>

	* Makefile.am: Makefile.am: first-shot "git-realclean-check" and
	  targets to print *CLEANFILES lists
	* ci_build.sh: ci_build.sh: introduce optional_dist_clean_check() to
	  use e.g. in "default-all-errors" case
	* ci_build.sh: ci_build.sh: in loop for "default-all-errors", report
	  "build" successes as such
	* ci_build.sh: ci_build.sh: skip optional_maintainer_clean_check() if
	  there is no .git [issue #1167]

2021-11-09  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: consider SNMPv3 Auth/Priv
	  algos detected by configure script when reporting the usage (via
	  addvar() help messages) [issue #1169]
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  consider SNMPv3 Auth/Priv algos detected by configure script when
	  reporting the usage [issue #1169]
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c:
	  comment the comment
	* tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c + scan_snmp.c + scan_nut.c: ifdef the
	  references to max_threads_scantype

2021-11-09  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: limit the impact of linux_i2c absent
	  libs when "auto" mode was requested
	* ci_build.sh: ci_build.sh: start default build from a clean slate,
	  and do not REQUIRE to be able to build everything (do auto-detect)
	* tests/Makefile.am, tools/nut-scanner/Makefile.am: tools/nut-
	  scanner/Makefile.am, tests/Makefile.am: do not refer to
	  LINKED_SOURCE_FILES with extra paths

2021-11-09  Jim Klimov <jim@jimklimov.com>

	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: note about PTY definitions
	* docs/config-prereqs.txt: docs/config-prereqs.txt: say a bit more
	  about OSes with containers
	* docs/config-prereqs.txt: docs/config-prereqs.txt: say a bit more
	  about "General call to Test" and mention "ci_build.sh"
	* docs/config-prereqs.txt, docs/nut.dict: docs/config-prereqs.txt:
	  revise pkgs available in Debian-like operating systems

2021-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: use detected
	  NUT_HAVE_LIBNETSNMP_usm* support to define and use actual Priv or
	  Auth types
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: use
	  detected NUT_HAVE_LIBNETSNMP_usm* support to define and use actual
	  Priv or Auth types
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: detect
	  support of usmAES128PrivProtocol in Net-SNMP we build against
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: detect
	  support of (NETSNMP_DRAFT_BLUMENTHAL_AES_04) usmAES192PrivProtocol
	  usmAES256PrivProtocol in Net-SNMP we build against
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: detect
	  support of usmDESPrivProtocol usmHMACMD5AuthProtocol
	  usmHMACSHA1AuthProtocol in Net-SNMP we build against
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: detect
	  support of usmHMAC256SHA384AuthProtocol
	  usmHMAC384SHA512AuthProtocol usmHMAC192SHA256AuthProtocol in Net-
	  SNMP we build against
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: ifdef
	  all references to NETSNMP_DRAFT_BLUMENTHAL_AES_04 related code
	* tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-init.c:
	  tools/nut-scanner/... : move init/destroy of threadcount_mutex from
	  nut-scanner.c to nutscan-init.c

2021-11-05  Dim <dmitrijzukov@eaton.com>

	* drivers/snmp-ups.c, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_snmp.c: Added new auth methods to snmp

2021-11-08  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_xml_http.c: tools/nut-scanner/scan_eaton_serial.c +
	  scan_nut.c + scan_snmp.c + scan_xml_http.c: release global
	  semaphores in final protocol-scanner tread reaping
	* tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_xml_http.c: tools/nut-scanner/scan_eaton_serial.c +
	  scan_nut.c + scan_snmp.c + scan_xml_http.c: report if we are
	  waiting for semaphored threads to complete

2017-10-31  barraudl <lilianbarraud@eaton.com>

	* tools/nut-scanner/Makefile.am, tools/nut-scanner/README, tools/nut-
	  scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/nutscan-init.c, tools/nut-scanner/nutscan-init.h: Revise
	  use of semaphores in nut-scanner vs libnutscanner  Original commit
	  in 42ITy fork in 2017: "Fix the Debian package generation"  Adapted
	  into NUT upstream code, considering 4 years of codebase evolution,
	  in 2021:

2017-10-23  barraudl <lilianbarraud@eaton.com>

	* configure.ac, tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-
	  scanner.c, tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_xml_http.c: Add thread limitation to avoid memory
	  error  Original development in 42ITy fork in 2017:   UPDATE: Merged
	  with NUT upstream, considering evolution of codebases over 4 years
	  since original commit, revised 2021:

2021-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-hid.c: drivers/mge-hid.c: actively check and warn if we
	  truncated the string
	* drivers/gamatronic.c: drivers/gamatronic.c: actively check and warn
	  if we truncated the string
	* docs/nut.dict: docs/nut.dict: update for recent NEWS
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  safely limit a strncpy() call
	* drivers/oneac.c: drivers/oneac.c: shield a potentially truncating
	  snprintf() into a small buffer
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRINGOP_TRUNCATION
	* drivers/mge-hid.c: drivers/mge-hid.c: shield a potentially
	  truncating snprintf() into a small buffer

2021-11-08  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: for CppUnit, also sanity-check
	  CPPUNIT_ASSERT_MESSAGE()

2021-11-07  Jim Klimov <jimklimov+nut@gmail.com>

	* clients/Makefile.am: clients/Makefile.am: depend on "dummy" recipe
	  to re-evaluate out-of-dir libs (so development iterations in them
	  are reflected in rebuilds)
	* drivers/Makefile.am: drivers/Makefile.am: depend on "dummy" recipe
	  to re-evaluate out-of-dir libs (so development iterations in them
	  are reflected in rebuilds)
	* server/Makefile.am: server/Makefile.am: depend on "dummy" recipe to
	  re-evaluate out-of-dir libs (so development iterations in them are
	  reflected in rebuilds)
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  depend on "dummy" recipe to re-evaluate out-of-dir libs (so
	  development iterations in them are reflected in rebuilds)
	* tests/Makefile.am: tests/Makefile.am: depend on "dummy" recipe to
	  re-evaluate out-of-dir libs (so development iterations in them are
	  reflected in rebuilds)
	* tests/Makefile.am: tests/Makefile.am: drop obsoleted comment
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: add
	  test_strarr_alloc()  This may seem trivial, but there are
	  suspicions this allocation does not always work (e.g. NUT issue
	  #1126)

2021-11-07  Jim Klimov <jim@jimklimov.com>

	* drivers/gamatronic.c: drivers/gamatronic.c: shield a potentially
	  truncating snprintf() into a small buffer
	* drivers/bcmxcp.c: drivers/bcmxcp.c: shield a potentially dangerous
	  snprintf() into a small buffer as tested-safe
	* clients/upscmd.c: clients/upscmd.c: shield a potentially dangerous
	  snprintf() into a small buffer as tested-safe
	* clients/upsrw.c: clients/upsrw.c: shield a potentially dangerous
	  snprintf() into a small buffer as tested-safe
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: add
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_TRUNCATION

2021-11-07  Jim Klimov <jimklimov+nut@gmail.com>

	* clients/nutclient.cpp: clients/nutclient.cpp: safety check in
	  strarr_alloc(): returned pointer should be not null
	* clients/nutclient.h: tests/nutclienttest.h: whitespace fixes
	  (indent chars)
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: whitespace fixes
	  (wrap long lines for maintainability)

2021-11-07  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: load_mib2nut(): do not
	  report "Unknown mibs value" just if a device did not match the
	  mapping [NUT issue #1141]
	* drivers/snmp-ups.c: drivers/snmp-ups.c: refactor load_mib2nut() to
	  not `strcmp(mib, "auto")` many times

2021-11-07  Jim Klimov <jimklimov@gmail.com>

	* drivers/snmp-ups.c: Update snmp-ups.c  Fix use of `char
	  su_scratch_buf[255]` (original static array moved to another file
	  in master branch), and bump `DRIVER_VERSION`

2021-11-07  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: added snmp-ups support for ondelay/offdelay for
	  NUT-2.7.5

2021-11-07  Jim Klimov <jimklimov@gmail.com>

	* drivers/snmp-ups.c: Update snmp-ups.c  Use the common (and
	  sufficiently large for any runaway numeric madness)
	  `su_scratch_buf` instead of a local `char[6]` buffer.
	* drivers/snmp-ups.c: Update snmp-ups.c  A few small whitespace fixes

2021-11-07  Jim Klimov <jim@jimklimov.com>

	* drivers/arduino-hid.c: drivers/arduino-hid.c: normalize whitespace
	  for NUT codebase
	* drivers/arduino-hid.c, drivers/arduino-hid.h: drivers/arduino-
	  hid.{c,h}: update (C) to arduino-hid support author
	* NEWS: NEWS: added usbhid-ups new subdriver arduino-hid support for
	  NUT-2.7.5
	* NEWS: NEWS: added USB HID support on interface number greater than
	  0 for NUT-2.7.5
	* NEWS: NEWS: added huawei-ups2000 support for NUT-2.7.5

2021-11-07  Jim Klimov <jimklimov@gmail.com>

	* docs/man/huawei-ups2000.txt: Update huawei-ups2000.txt  Made the
	  `configure` example a bit friendlier for copy-pasting.

2021-11-06  Jim Klimov <jim@jimklimov.com>

	* tests/.gitignore, tools/nut-scanner/.gitignore: GitIgnore
	  LINKED_SOURCES (follow-up to PR #1159)
	* .gitignore: GitIgnore .dirstamp in build trees
	* Makefile.am: Makefile.am: move removal of dist tarballs and build
	  packages from "distclean" to "maintainer-clean"
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: mark
	  use of LINKED_SOURCE_FILES as "nodist"
	* tests/Makefile.am: tests/Makefile.am: mark use of
	  LINKED_SOURCE_FILES as "nodist"
	* Makefile.am: Makefile.am: add a "make realclean" as alias to
	  maintainer-clean
	* Makefile.am: Makefile.am: typo fix MAINTAINERCLEAN_FILES =>
	  MAINTAINERCLEANFILES
	* ci_build.sh: ci_build.sh: there is no default "make realclean"
	  implem in autotools, fall back to "maintainer-clean" support for
	  wipingg the workspace
	* Makefile.am, clients/Makefile.am, common/Makefile.am,
	  conf/Makefile.am, data/Makefile.am, data/html/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  drivers/Makefile.am, include/Makefile.am, lib/Makefile.am,
	  scripts/Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/augeas/Makefile.am, scripts/devd/Makefile.am,
	  scripts/hotplug/Makefile.am, scripts/python/Makefile.am,
	  scripts/systemd/Makefile.am, scripts/udev/Makefile.am,
	  scripts/ufw/Makefile.am, scripts/upsdrvsvcctl/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/Makefile.am,
	  tools/nut-scanner/Makefile.am: */Makefile.am: there is no default
	  "make realclean" implem in autotools, fall back to "maintainer-
	  clean" support for wipingg the workspace
	* Makefile.am, clients/Makefile.am, common/Makefile.am,
	  conf/Makefile.am, data/Makefile.am, data/html/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  drivers/Makefile.am, include/Makefile.am, lib/Makefile.am,
	  scripts/Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/augeas/Makefile.am, scripts/devd/Makefile.am,
	  scripts/hotplug/Makefile.am, scripts/python/Makefile.am,
	  scripts/systemd/Makefile.am, scripts/udev/Makefile.am,
	  scripts/ufw/Makefile.am, scripts/upsdrvsvcctl/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/Makefile.am,
	  tools/nut-scanner/Makefile.am: */Makefile.am: reshuffle what we
	  remove as part of "make distclean" vs. "make realclean" (can be
	  remade only by autogen.sh)
	* Makefile.am: Makefile.am: do not "distclean" away some more parts
	  of "configure" script ecosystem (leave that to "realclean")
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  restore use of $(builddir) for LINKED_SOURCE_FILES
	* tests/Makefile.am: tests/Makefile.am: restore use of $(builddir)
	  for LINKED_SOURCE_FILES
	* ci_build.sh: ci_build.sh: call optional_realclean_check() after
	  more build variants
	* tools/Makefile.am: tools/Makefile.am: distclean the helper scripts
	  that can be re-made
	* ci_build.sh: ci_build.sh: change the cleanliness check from
	  "distcheck" to "realcheck" and factor into a method
	* Makefile.am: Makefile.am: regenerate the helper needed for
	  ChangeLog if cleaned away
	* Makefile.am: Makefile.am: delete the configure script and its
	  components not in a "make distclean" but in "make realclean"

2021-11-05  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: use
	  BUILT_SOURCES=LINKED_SOURCE_FILES to avoid dist-ing temporary
	  symlinks as files
	* tests/Makefile.am: tests/Makefile.am: use
	  BUILT_SOURCES=LINKED_SOURCE_FILES to avoid dist-ing temporary
	  symlinks as files
	* ci_build.sh: ci_build.sh: only call dpkg if present
	* ci_build.sh: ci_build.sh: configure_nut(): call ./autogen.sh before
	  CONFIGURE_SCRIPT if there is no configure script
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  revise the magic of LINKED_SOURCE_FILES for distcheck
	* tests/Makefile.am: tests/Makefile.am: revise the magic of
	  LINKED_SOURCE_FILES for distcheck
	* ci_build.sh: ci_build.sh: add a DO_DISTCHECK_CLEAN to make sure we
	  clean everything made, and no more (after any distcheck)
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  revise the magic of LINKED_SOURCE_FILES for distcheck
	* tests/Makefile.am: tests/Makefile.am: revise the magic of
	  LINKED_SOURCE_FILES for distcheck
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: make
	  sure to symlink sources into $(builddir)/
	* tests/Makefile.am: tests/Makefile.am: make sure to symlink sources
	  into $(builddir)/
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: work
	  around dmake bugs
	* tests/Makefile.am: tests/Makefile.am: work around dmake bugs
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: quote
	  pathnames, and force the symlink (to overwrite older if any)
	* tests/Makefile.am: tests/Makefile.am: quote pathnames, and force
	  the symlink (to overwrite older if any)
	* Makefile.am: Makefile.am: distclean-local: first find(), then rm()
	  the findings (find-recursion fails otherwise)
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  symlink source used from another directory into current builddir,
	  do avoid external ".deps/" usage
	* tests/Makefile.am: tests/Makefile.am: symlink source used from
	  another directory into current builddir, do avoid external ".deps/"
	  usage
	* Makefile.am, clients/Makefile.am, common/Makefile.am,
	  drivers/Makefile.am, server/Makefile.am, tests/Makefile.am,
	  tools/nut-scanner/Makefile.am: */Makefile.am: Do not clean ".deps"
	  in SUBDIRS of the main project
	* Makefile.am, clients/Makefile.am, common/Makefile.am,
	  conf/Makefile.am, data/Makefile.am, data/html/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  drivers/Makefile.am, include/Makefile.am, lib/Makefile.am,
	  scripts/Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/augeas/Makefile.am, scripts/devd/Makefile.am,
	  scripts/hotplug/Makefile.am, scripts/python/Makefile.am,
	  scripts/systemd/Makefile.am, scripts/udev/Makefile.am,
	  scripts/ufw/Makefile.am, scripts/upsdrvsvcctl/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/Makefile.am,
	  tools/nut-scanner/Makefile.am: */Makefile.am: revise CLEANFILES and
	  DISTCLEANFILES (favored over clean-local target rules)

2021-11-04  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: use
	  libcommon.la as part of libnutscan.(la|so)

2021-11-04  Jim Klimov <EvgenyKlimov@eaton.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: do
	  not build common.c into nut-scanner (avoid double-definition of
	  nut_debug_level among other things)
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: fix
	  rule for NUT_SCANNER_DEPS to be sure
	* clients/Makefile.am, common/Makefile.am, drivers/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/nut-
	  scanner/Makefile.am: */Makefile.am: define dependencies on out-of-
	  dir *.la helper libs: use AM_MAKEFLAGS (follows-up to PR #1151)

2021-11-04  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  revise parsing of --thread via strtol()  Inspired by 42ITy fork
	  approach to similar issue
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  rename "--jobs" to "--thread"  Inspired by 42ITy fork approach to
	  similar issue

2021-11-04  Jim Klimov <EvgenyKlimov@eaton.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am: fix
	  rule for NUT_SCANNER_DEPS to be sure
	* clients/Makefile.am, common/Makefile.am, drivers/Makefile.am,
	  server/Makefile.am, tests/Makefile.am, tools/nut-
	  scanner/Makefile.am: */Makefile.am: define dependencies on out-of-
	  dir *.la helper libs: use AM_MAKEFLAGS (follows-up to PR #1151)

2021-11-04  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  refine sanity-checks for nofile_limit.rlim_cur value range
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_xml_http.c: tools/nut-scanner/nut-scanner.c
	  + scan_xml_http.c + scan_snmp.c + scan_nut.c + nut-scan.h: Add a
	  hard limit on netxml scanning thread count
	* configure.ac, tools/nut-scanner/nut-scanner.c: tools/nut-
	  scanner/nut-scanner.c + configure.ac: detect if getrlimit() is
	  usable
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  constrain default or requested job count with current `ulimit -n`
	  (minus known overhead)
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  whitespace fix
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  wrap long line

2021-11-03  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: limit thread count like in scan_snmp.c
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: limit
	  thread count like in scan_snmp.c
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: define TRUE/FALSE
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: limit thread count like in scan_snmp.c
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  comment "#endif // HAVE_PTHREAD" to navigate in code better
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: only
	  loop to free the thread_array if any were allocated
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/scan_snmp.c:
	  tools/nut-scanner/nut-scan.h + scan_snmp.c: (C) header and some
	  cosmetic fixes
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  bump default max_threads to not lag with /24 subnets

2021-11-03  Jim Klimov <EvgenyKlimov@eaton.com>

	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: only
	  sleep after attempting pthread_tryjoin_np() if nothing got cleaned
	  away
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: hide
	  debug logging for thread herding
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/scan_snmp.c:
	  tools/nut-scanner/scan_snmp.c: update comments and messages
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  update log-tracing of pthread herding
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: move
	  locking of total thread count change when we add one

2021-11-03  Jim Klimov <jim@jimklimov.com>

	* configure.ac, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_snmp.c: configure.ac, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/nut-scanner.c: not all glibc versions
	  HAVE_PTHREAD_TRYJOIN

2021-11-03  Jim Klimov <EvgenyKlimov@eaton.com>

	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: limit
	  the thread count for parallelized scanning
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  add a threadcount_mutex to use in all children
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  handle max_threads, curr_threads
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  add support for -j N (--jobs=N) option to limit simultaneous
	  scanning threads
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  comment a FIXME for limiting the pthread count
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  nutscan_cidr_to_ip(): forbid scanning whole Internet

2021-11-03  Jim Klimov <jim@jimklimov.com>

	* tests/.gitignore: GitIgnore test log and trace for "getvaluetest"

2021-11-03  Jim Klimov <EvgenyKlimov@eaton.com>

	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  tone down the debug-logging of CIDR processing
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  only free cidr_tok after we are done manipulating its memory buffer
	* tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-ip.c:
	  nutscan-ip.c, nut-scanner.c: instrument the CIDR processing to
	  trace an error

2021-11-02  Jim Klimov <jim@jimklimov.com>

	* docs/documentation.txt, docs/man/dummy-ups.txt:
	  docs/documentation.txt + docs/man/dummy-ups.txt: refer to
	  `tools/nut-ddl-dump.sh` in the same manner (issue #1111)
	* docs/man/dummy-ups.txt: docs/man/dummy-ups.txt: fix use of "link:"
	  tag in asciidoc (issue #1111) and slightly reword
	* docs/documentation.txt: docs/documentation.txt: fix use of "link:"
	  tag in asciidoc (issue #1111) and slightly reword
	* docs/nut-names.txt: docs/nut-names.txt: fix use of "link:" tag in
	  asciidoc (issue #1111)
	* docs/developers.txt: docs/developers.txt: fix use of "link:" tag in
	  asciidoc (issue #1111)

2021-11-01  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: give the caller a way to disable parallel
	  builds with PARMAKE_FLAGS=" " (space)
	* ci_build.sh: ci_build.sh: enable parallel builds for default build
	  (one without a BUILD_TYPE specified)
	* ci_build.sh: ci_build.sh: enable parallel builds for "distcheck" in
	  default builds, which should now pass well (after usual build and
	  check passed)
	* ci_build.sh: ci_build.sh: report chosen settings for parallel
	  builds
	* configure.ac: configure.ac: test more proactively if valgrind can
	  test things and not crash by itself
	* ci_build.sh: ci_build.sh: enable parallel builds for "default-
	  tgt:*" which should now pass well
	* ci_build.sh: ci_build.sh: guess the available amount of parallelism
	  for the current system; consider load averages for GNU Make too
	* docs/Makefile.am, docs/man/Makefile.am: docs/(man/)Makefile.am:
	  move back to builddir all files for the built documents, not just
	  the target name
	* docs/Makefile.am, docs/man/Makefile.am: docs/(man/)Makefile.am:
	  before putting back the built documents, clean up the destination
	  if needed and make the workdir removable if needed (a2x can copy
	  system/EXTRA_DIST resources with their attrs)

2021-10-31  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/man/Makefile.am: docs/(man/)Makefile.am:
	  only delete target before build if it is a directory (chunked HTML)
	* docs/Makefile.am: docs/Makefile.am: update comment about
	  destination dir for asciidoc/a2x
	* docs/man/Makefile.am: Revert "docs/man/Makefile.am: tone down the
	  use of "touch" for multicomponent docs"  This reverts commit
	  0b9ac2500ddbc7bd11a639805d43cda9259bfb1f.
	* docs/Makefile.am: docs/Makefile.am: avoid potential for races where
	  same document is built several times (mentioned in different list
	  variables)
	* docs/man/Makefile.am: docs/man/Makefile.am: avoid races where same
	  document is built several times (mentioned in different list
	  variables)
	* docs/man/Makefile.am: Revert "docs/man/Makefile.am: avoid races
	  where same document is built several times (mentioned in different
	  list variables)"  This reverts commit
	  29ae5a8f6e5524d689ebaf2abdf508528288b010.
	* docs/man/Makefile.am: docs/man/Makefile.am: tag DOC-MAN-HTML
	  visibly different from DOC-HTML of the main docs dir
	* docs/man/Makefile.am: docs/man/Makefile.am: avoid races where same
	  document is built several times (mentioned in different list
	  variables)
	* docs/man/Makefile.am: docs/man/Makefile.am: tone down the use of
	  "touch" for multicomponent docs
	* docs/.gitignore, docs/Makefile.am, docs/man/.gitignore,
	  docs/man/Makefile.am: docs/(man/)Makefile.am: fan out doc builds
	  into subdirectories, where we can, so parallel runs do not collide

2021-11-01  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: update the heading comment

2021-10-31  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: docs/man/Makefile.am: whitespace fixes (drop
	  some indentation)

2021-10-30  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/Makefile.am: docs/Makefile.am: as developer aid, add
	  "(all-)docs" target to try building all types regardless of
	  enablement by configure script; also add "make man" support

2021-10-31  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: support CI_REQUIRE_GOOD_GITIGNORE=false
	  to bypass fatal error on git status being not empty after build

2021-10-30  Jim Klimov <jimklimov+nut@gmail.com>

	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  reference nut_version.h in a way that does not offend "make
	  dist(check)"
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am:
	  reference some out-of-dir sources via top_srcdir (not ../..)
	* clients/Makefile.am, drivers/Makefile.am, server/Makefile.am,
	  tests/Makefile.am, tools/nut-scanner/Makefile.am: */Makefile.am:
	  define dependencies on out-of-dir *.la helper libs, and reference
	  them via top_builddir (not ..)
	* common/Makefile.am: common/Makefile.am: reference nut_version.h in
	  a way that does not offend "make dist(check)"
	* ci_build.sh: ci_build.sh: default "minimal" ritual should not spend
	  half the time building docs

2021-10-04  Jim Klimov <jim@jimklimov.com>

	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: range-check
	  and cast returned ipmi_dev->sensors_count
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c:
	  libfreeipmi_get_sensors_info(): we check that sdr_record_len is not
	  negative, so can cast to (uint)
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c:
	  libfreeipmi_get_board_info(): range-check and cast mfg_date_time
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c:
	  libfreeipmi_get_psu_info(): range-check and cast libfreeipmi method
	  arguments which are ints
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c:
	  libfreeipmi_get_psu_info(): range-check and cast libfreeipmi method
	  arguments which are uint8_t
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c:
	  nut_ipmi_open(): range-check and cast libfreeipmi method arguments
	  which are uint8_t

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c:
	  range-check and cast ipmi_sec->authentication_type
	  ipmi_sec->privilege_level ipmi_id to match method signatures

2021-10-15  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: report Build host settings

2021-10-16  Jim Klimov <jimklimov+nut@gmail.com>

	* ci_build.sh, docs/developers.txt: ci_build.sh: add
	  BUILD_TYPE=fightwarn(-clang|-gcc) for presets with developer aid
	  Also updated docs/developers.txt with example and description

2021-10-26  Jim Klimov <jim@jimklimov.com>

	* tests/getvaluetest.c: tests/getvaluetest.c: align test structure
	  with field types in HIDData_t
	* tests/getvaluetest.c: tests/getvaluetest.c: fix bufsize size_t type
	* tests/getvaluetest.c: tests/getvaluetest.c: mark static local
	  methods as such
	* drivers/hidparser.c: drivers/hidparser.c: for skipping botched
	  LogMin/LogMax, also log a message

2021-10-20  Stephan Blecher <_github@blecher.at>

	* drivers/hidparser.c: drivers/hidparser.c

2021-10-22  Jim Klimov <jim@jimklimov.com>

	* autogen.sh: autogen.sh: surprise, not all systems have "dos2unix"
	* configure.ac: configure.ac: fix use of --with-docs
	* configure.ac: configure.ac: fix use of --with-valgrind

2021-10-21  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: currently constrain
	  cppcheck phase(s) to fightwarn-related branch/PR builds

2021-10-20  Jim Klimov <jim@jimklimov.com>

	* .gitignore, Jenkinsfile-dynamatrix, Makefile.am, ci_build.sh,
	  configure.ac, docs/config-prereqs.txt, docs/nut.dict,
	  m4/nut_check_cppcheck.m4: Add recipe support for cppcheck analysis
	* ci_build.sh: ci_build.sh: let initial DO_DISTCHECK value be set by
	  caller

2021-10-20  Arnaud Quette <arnaud.quette@gmail.com>

	* tools/nut-scanner/scan_snmp.c: Only try all OIDs if sysOID matching
	  failed

2021-10-19  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_ablerex.c, drivers/nutdrv_qx_ablerex.h:
	  drivers/nutdrv_qx_ablerex.{c,h}: heading fixes -- name, descr, (C)
	* drivers/nutdrv_qx.c, drivers/nutdrv_qx_ablerex.c:
	  drivers/nutdrv_qx.c + nutdrv_qx_ablerex.c: common whitespace fixes
	* drivers/Makefile.am: drivers/Makefile.am: restore bits lost with
	  initial posting of PR #1135
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: update DRIVER_VERSION for
	  added "ablerex" support

2021-10-18  Ablerexsoftware <Ablerex.software@ablerex.com.tw>

	* drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_ablerex.c, drivers/nutdrv_qx_ablerex.h: Add
	  nutdrv_qx driver for Ablerex model PR#2

2021-10-16  Jim Klimov <jim@jimklimov.com>

	* NEWS, UPGRADING, docs/nut.dict: UPGRADING: notice that upsdebugx()
	  et al became macros in NUT-2.7.5
	* NEWS: NEWS: another expected point for release after 2.7.5

2021-10-14  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am, drivers/snmp-ups-helpers.c, drivers/snmp-
	  ups.c, drivers/snmp-ups.h: Separate source files of snmp-ups.c
	  (driver core) and snmp-ups-helpers.c (shared mapping tables and
	  funcs) (#1134)  * drivers/Makefile.am: bring some order into
	  snmp_ups_SOURCES list  * drivers/snmp-ups.h: update (C) heading  *
	  drivers/snmp-ups.h: comment that su_find*() are related to certain
	  info_lkp_t fields  * drivers/snmp-ups.c: extract snmp-ups-helpers.c
	  that can be built independently  * drivers/snmp-ups.h: mark the
	  range of data points related to Subdrivers shared helpers functions

2021-10-12  Jim Klimov <jim@jimklimov.com>

	* drivers/powerware-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h:
	  drivers/snmp-ups.{h,c} + powerware-mib.c: reference date converter
	  by macro name instead of magic number
	* drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups.{h,c}:
	  rename the fun/nuf mappings to fun_vp2s/nuf_s2l to match the DMF
	  codebase and ease eventual backports
	* drivers/snmp-ups.h: drivers/snmp-ups.h: comment the fun/nuf mapping
	  and their relation to su_find_*() methods
	* drivers/snmp-ups.c: drivers/snmp-ups.c: clarify that we pass a
	  "long*" arg to su_find_infoval()
	* drivers/snmp-ups.c: drivers/snmp-ups.c: typo fix
	* drivers/snmp-ups.c: drivers/snmp-ups.c: clarify in decode_str()
	  that we pass a "long*" arg to su_find_infoval()
	* drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups.{c,h}:
	  rearrange braces, blank lines and some comments to match the
	  formatting fixes in DMF branch (and to simplify eventual backport)
	* drivers/snmp-ups.c: drivers/snmp-ups.c: rearrange mib2nut[] in
	  alphabetic order (except *ietf tables that go last) and reference
	  mib.c sources
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  whitespace (indent)
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: fix regex pattern
	  for dynacfgPipeline.appliesToChangedFilesRegex_FILES_PY
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: parameterize
	  dynacfgPipeline.axisCombos* and excludeCombos_DEFAULT_* for
	  repetitive settings
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: parameterize
	  dynacfgPipeline.branchStableRegex
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: extend
	  sample capability labels with PYTHON variants
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: update for Python-
	  version build scenarios
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: add
	  dynacfgPipeline.appliesToChangedFilesRegex_FILES_PY for future
	  handling
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: update
	  dynacfgPipeline.appliesToChangedFilesRegex_FILES_RECIPE to consider
	  changes of autogen.sh
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: fix whitespace style
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c: fix
	  whitespace style

2021-10-11  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-device.c: tools/nut-scanner/nutscan-
	  device.c: fix whitespace style
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  whitespace style
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c: fix
	  whitespace style
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c: fix
	  whitespace style
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: fix whitespace style
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c: fix
	  whitespace style
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix whitespace style
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: fix whitespace style
	* tools/nut-scanner/nutscan-device.h: tools/nut-scanner/nutscan-
	  device.h: fix whitespace style
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  whitespace style
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: fix
	  whitespace style
	* tools/nut-snmpinfo.py.in: tools/nut-snmpinfo.py.in: fix whitespace
	  style of generated header
	* tools/nut-snmpinfo.py.in: tools/nut-snmpinfo.py.in: fix heading of
	  generated header

2021-09-28  Jim Klimov <jim@jimklimov.com>

	* drivers/microdowell.h: drivers/microdowell.h: normalize whitespace
	  within the file
	* drivers/microsol-apc.h: drivers/microsol-apc.h: whitespace fix

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix whitespace style
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: fix whitespace style
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c: fix
	  whitespace style

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* tests/cpputest.cpp: tests/cpputest.cpp: avoid "no out-of-line
	  virtual method definitions" (weak-vtables)
	* tests/nutclienttest.cpp: tests/nutclienttest.h: avoid "unused
	  exception parameter ex"
	* clients/nutclientmem.h: clients/nutclientmem.h: avoid "extra ;
	  after method" warnings

2021-10-11  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/man/Makefile.am: docs{,/man}/Makefile.am:
	  quiesce docs-generating targets by default to just state what they
	  make
	* docs/nut.dict: Update spellchecker dict

2021-10-09  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: add support for CI agents setting
	  NUT_BUILD_CAPS=valgrind=no
	* Makefile.am: Makefile.am: `make spellcheck` from top dir should be
	  quieter (fallout from touchfiles)
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: stress to
	  `systemctl restart lxc-net` after edits of /etc/lxc/dnsmasq-
	  hosts.conf
	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: stress that for CI_WRAP_SH method, the Prefix Start
	  Agent Commandshould not pollute stderr/stdout
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: report more details
	  about the build host when we "Inspect initial envvars"

2021-10-08  Jim Klimov <jim@jimklimov.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh:
	  deprecate "which" in favor of "command -v"
	* ci_build.sh: ci_build.sh: deprecate "which" in favor of "command
	  -v"

2021-10-07  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_python.m4: m4/nut_check_python.m4: export PYTHON(2,3)
	  envvars for other scripts called in the build

2021-09-28  Jim Klimov <jim@jimklimov.com>

	* .gitignore: GitIgnore the tmp/ subdirectory used by CI builds
	* .gitignore: GitIgnore Python precompiled files

2021-09-27  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: split generation of "data" files vs.
	  "scripts" from *.in templates
	* configure.ac: Update python scripts to be generated by configure
	  and using the detected PYTHON value
	* clients/nutclient.h: clients/nutclient.h: whitespace typo fix
	* docs/developers.txt: docs/developers.txt: fix reference to Fosshost
	  to be an URL

2021-09-26  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: for a non-PR build
	  of a fightwarn* branch, reference 'fightwarn' for analysis

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl => generated nutscan-
	  usb.h: sentinel in a table of uint16_t can not be -1

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* clients/upsclient.c, configure.ac: clients/upsclient.c +
	  configure.ac: fix use of CPU_TYPE
	* configure.ac: configure.ac: add "-Wno-cast-qual" to clang-medium
	  and clang-hard warnings levels

2021-10-05  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: Update spellchecker
	* NEWS: NEWS: added FTTx support and other genericups improvenets for
	  NUT-2.7.5

2021-10-05  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: more AC_CHECK_HEADERS_ONCE
	* ci_build.sh: ci_build.sh: for default mode (no BUILD_TYPE) enable
	  cgi and dev files (no=>auto) and do not require serial drivers
	  (yes=>auto)
	* m4/nut_type_socklen_t.m4: m4/nut_type_socklen_t.m4: fix detection
	  on windows  Probably practical codebase should also account for
	  other arg types, e.g. "SOCKET" that is not even exported into a
	  macro so far.
	* ci_build.sh: ci_build.sh: report CI_OS_NAME detection issues more
	  clearly  It is not helpful to read just this: Could not recognize
	  ... from ''-''

2021-10-05  Jim Klimov <jimklimov@gmail.com>

	* autogen.sh: autogen.sh: suggest CRLF fixes for the workspace (e.g.
	  if checked out on Windows)  This falls a bit short of enforcing
	  with .gitattributes which may or may not interfere with platform-
	  native editors and other tools.

2021-10-04  Jim Klimov <jim@jimklimov.com>

	* conf/Makefile.am, docs/man/Makefile.am: conf/Makefile.am,
	  docs/man/Makefile.am: avoid prerequisites on suffix rules
	* drivers/apc-mib.c: drivers/apc-mib.c: bump APCC_MIB_VERSION for PR
	  #1113
	* docs/man/genericups.txt, drivers/genericups.c: genericups:
	  officially alias "NULL" and "none" setting keywords

2021-10-04  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: recommend a unique Remote root directory per agent

2021-10-04  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: extend QEMU build
	  scenarios to "ssh-qemu-nut-builder" agents, and to iterate
	  "COMPILER" toolkits for cross-check on same platform

2021-10-04  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: Debianish systems
	  tend to deliver g++ in a separate package from gcc
	* docs/ci-farm-lxc-setup.txt, docs/nut.dict: docs/ci-farm-lxc-
	  setup.txt: add a chapter on Jenkins Build Agent setup for the
	  containers

2021-10-03  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/nut.dict: Update spellchecker
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: document
	  making a self-login ssh key for abuild
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: document
	  allowing container SSH server to accept envvars from client

2021-10-03  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: Typo fix: remove
	  extra unstashCleanSrc() for ci_build.sh preparations
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: allow limited use
	  of QEMU containers as build agents (slow workers => few combos)

2021-10-02  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: quiesce the check for usable valgrind
	  binary
	* docs/nut.dict: Update spellchecker
	* configure.ac: configure.ac: adapt warnings level (auto, minimal)
	  for GCC with c89/c90/ansi requested builds
	* tests/getvaluetest.c: tests/getvaluetest.c: fix declaration of
	  variables in code body, and type of sizeof-derived iterator
	* tests/getvaluetest.c: tests/getvaluetest.c: normalize whitespace to
	  NUT style
	* tests/getvaluetest.c: tests/getvaluetest.c: add (C) and descriptive
	  heading

2021-10-02  Jim Klimov <jimklimov+nut@gmail.com>

	* configure.ac: configure.ac: test if valgrind is actually usable on
	  build/check ssytem
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: fix
	  extraction of hosts-map data
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: make note
	  of lxc-create for other distros
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: add git to
	  early starter-kit of packages

2021-09-30  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix, docs/developers.txt: Jenkinsfile-dynamatrix
	  + developers.txt: for "GNU C89 standard builds with fatal
	  warnings", only run with a `fightwarn.*89.*` regex branch name; do
	  not pollute logs and analysis of "usual fightwarn" builds
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: for "GNU C standard
	  builds with non-fatal warnings, without distcheck and docs (must
	  pass)" slowBuild scenario, start with a "gnu89/gnu++98" non-
	  regression variant
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: reword some
	  slowBuild filter config descriptions and comments
	* docs/developers.txt, docs/nut.dict: docs/developers.txt: extend the
	  description of NUT CI setup  Clarification of adaptive jobs,
	  running different sets of scenarios, and how to reproduce a failed
	  test case locally.  Also updated spellchecker dictionary.
	* docs/developers.txt: docs/developers.txt: stress likely
	  incompatibility with stricter C89/GNU89/ANSI-C standard, so C99
	  (GNU99) is the baseline
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: rearrange for
	  readability (line-split allowedFailure and excludeCombos blocks
	  that have many combos inside)

2021-09-30  Jim Klimov <jimklimov+nut@gmail.com>

	* .lgtm.yml: .lgtm.yml: drop redundant lines
	* autogen.sh: autogen.sh: whitespace fix
	* autogen.sh, configure.ac, scripts/systemd/Makefile.am: nut-
	  common.tmpfiles.in: fix systemd magic vs autoconf magic  Follows up
	  from PR #1037 for issue #1030 to let the trick work for distcheck
	  and similar out-of-tree builds.

2021-09-27  Jim Klimov <jim@jimklimov.com>

	* .lgtm.yml: Add .lgtm.yml to specify search for python template
	  files  * Index *.py.in + scripts/python/app/NUT-Monitor.in * Do not
	  consider them templates to ignore * Also turn off the FIXME alerts,
	  NUT has a lot of those so far
	* NEWS: NEWS: updated the python 2+3 compatibility notice
	* Makefile.am: Makefile.am: call the generated gitlog2changelog.py
	  from correct path
	* scripts/augeas/Makefile.am, tools/Makefile.am: Fix "dist" targets
	  to call templates gen-nutupsconf-aug.py.in and nut-snmpinfo.py.in
	  that they have
	* scripts/python/module/PyNUT.py.in,
	  scripts/python/module/test_nutclient.py.in:
	  scripts/python/module/PyNUT.py.in: update syntax for Python 3 (also
	  ok for 2.7)
	* .gitignore: GitIgnore possible leftovers from interrupted configure
	  script run
	* scripts/Solaris/.gitignore, scripts/augeas/.gitignore,
	  scripts/python/app/.gitignore, scripts/python/module/.gitignore,
	  tools/.gitignore: GitIgnore generated python scripts
	* scripts/augeas/Makefile.am: scripts/augeas/Makefile.am: comment
	  where gen-nutupsconf-aug.py comes from
	* autogen.sh: autogen.sh: simplify call of gen-nutupsconf-aug.py.in
	  in the subdir
	* autogen.sh: autogen.sh: use gen-nutupsconf-aug.py.in with the
	  $PYTHON interpreter
	* ci_build.sh: ci_build.sh: pass $PYTHON envvar -t configure --with-
	  python=... arg
	* configure.ac: configure.ac: split generation of "data" files vs.
	  "scripts" from *.in templates
	* configure.ac, scripts/Solaris/Makefile.am,
	  scripts/Solaris/{precheck.py => precheck.py.in},
	  scripts/augeas/Makefile.am, .../{gen-nutupsconf-aug.py => gen-
	  nutupsconf-aug.py.in}, scripts/python/Makefile.am,
	  scripts/python/app/{NUT-Monitor => NUT-Monitor.in},
	  scripts/python/module/{PyNUT.py => PyNUT.py.in},
	  .../module/{test_nutclient.py => test_nutclient.py.in},
	  tools/Makefile.am, tools/{gitlog2changelog.py =>
	  gitlog2changelog.py.in}, tools/{nut-snmpinfo.py => nut-
	  snmpinfo.py.in}: Update python scripts to be generated by configure
	  and using the detected PYTHON value
	* configure.ac, m4/nut_check_python.m4: configure.ac: detect PYTHON,
	  PYTHON2, PYTHON3 implementations in the build environment
	* autogen.sh: autogen.sh: find various python versions if not
	  specified by $PYTHON
	* clients/nutclient.h: clients/nutclient.h: whitespace typo fix
	* docs/developers.txt: docs/developers.txt: fix reference to Fosshost
	  to be an URL
	* NEWS: NEWS: expect a few more milestones for 2.7.6 (or later)
	  release
	* UPGRADING: UPGRADING: mention protocol changes due to new TRACKING
	  ability
	* NEWS, UPGRADING: NEWS + UPGRADING: Warn about API changes due to
	  fightwarn

2021-09-26  Mark Dietzer <git@doridian.net>

	* drivers/apc-mib.c: Add active power and apparent power from APC
	  MIBs for single-phase UPS devices

2021-09-25  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt, docs/nut.dict: docs/developers.txt: replace
	  references to defunct Travis CI with new NUT CI farm [#869]
	* docs/nut-qa.txt, docs/nut.dict: docs/nut-qa.txt: replace references
	  to defunct Travis CI with new NUT CI farm [#869]
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: with customized
	  shellcheck dynamatrixAxesLabels, be sure to match both OS_FAMILY
	  and OS_DISTRO as a bundle
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: with
	  docs+distcheck, also test compliance with available Make
	  interpreters
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: with shellcheck,
	  also test available Make interpreters
	* Makefile.am, configure.ac, include/Makefile.am: configure.ac +
	  {./,include/}Makefile.am: revise the recipe for
	  include/nut_version.h
	* docs/nut.dict: docs/nut.dict: update dict
	* ci_build.sh: ci_build.sh: call "$MAKE -j NUM" with a space, to
	  cater for make implems that require a separate argument token

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* m4/nut_func_getnameinfo_argtypes.m4:
	  m4/nut_func_getnameinfo_argtypes.m4: reorder the loop to first try
	  current X/Open definition of getnameinfo()
	* configure.ac, m4/nut_check_headers_windows.m4,
	  m4/nut_func_getnameinfo_argtypes.m4:
	  m4/nut_func_getnameinfo_argtypes.m4
	  m4/nut_check_headers_windows.m4: lift recipes from cURL to detect
	  NUT_FUNC_GETNAMEINFO_ARGTYPES

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_SIGN_COMPARE and HAVE_PRAGMA_GCC
	  _DIAGNOSTIC_IGNORED_TAUTOLOGICAL_UNSIGNED_ZERO_COMPARE  Sometimes
	  library/system provided types are beyond our control and vary from
	  OS to OS...

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix whitespace style
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: fix
	  whitespace style
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  whitespace style
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: fix
	  whitespace style
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c: fix
	  whitespace style
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: fix whitespace style
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c: fix
	  whitespace style
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: fix whitespace style
	* tools/nut-scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h:
	  tools/nut-scanner/nutscan-ip.c: fix whitespace style
	* tools/nut-scanner/nutscan-init.c: tools/nut-scanner/nutscan-init.c:
	  fix whitespace style
	* tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
	  device.h: tools/nut-scanner/nutscan-device.[c,h]: fix whitespace
	  style
	* tools/nut-scanner/nutscan-display.c: tools/nut-scanner/nutscan-
	  display.c: fix whitespace style
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  fix whitespace style
	* tools/nut-scanner/nut-scan.h: tools/nut-scanner/nut-scan.h: fix
	  whitespace style

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* server/sstate.c: server/sstate.c: whitespace fix

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: warn that a build without BUILD_TYPE
	  ignores BUILD_WARNOPT and BUILD_WARNFATAL settings

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* tests/Makefile.am: tests/Makefile.am: comment a TODO for
	  referencing helpers built in other dirs

2021-09-22  Yifeng Li <tomli@tomli.me>

	* docs/nut.dict: nut.dict: add my name "Yifeng".
	* docs/nut.dict: nut.dict: add technical terms for UPS2000 man page.
	* docs/man/Makefile.am, docs/man/huawei-ups2000.txt: huawei-ups2000:
	  add documentation.
	* drivers/Makefile.am, drivers/huawei-ups2000.c: huawei-ups2000:
	  Modbus driver for Huawei UPS2000 (1kVA-3kVA)  This commit
	  implements a Modbus driver for Huawei UPS2000 (1kVA-3kVA) series
	  UPS units using the USB or RS-232 interface (USB is only support on
	  Linux 5.12+ via the "xr_serial" kernel module), with support for
	  power and battery status monitoring, alarm reporting, RW variables,
	  and instant commands for battery selftest, buzzer, shutdown,
	  restart, and bypass control.

2021-09-23  Jim Klimov <jim@jimklimov.com>

	* drivers/generic_modbus.c: drivers/generic_modbus.c: fix assignments
	  of sigar[].type to enum
	* drivers/generic_modbus.c: drivers/generic_modbus.{c,h}: fix
	  ser_parity to char, and sanity-check before dereferencing
	* drivers/generic_modbus.c: drivers/generic_modbus.c: fix switch{}
	  warnings
	* drivers/generic_modbus.c: drivers/generic_modbus.c: fix suseconds_t
	  for time ranges
	* drivers/generic_modbus.c: drivers/generic_modbus.c: fix warnings
	  with declarations
	* drivers/generic_modbus.c, drivers/generic_modbus.h:
	  drivers/generic_modbus.{c,h}: fix whitespace style
	* NEWS: NEWS: added tripplite ability to manage outlet groups for
	  NUT-2.7.5

2021-09-23  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict: updated for recent NEWS and UPGRADING
	* UPGRADING: UPGRADING: clarified upsdebugx() `[D#]` prefix impact
	* UPGRADING: UPGRADING: stress that new Qx protocol drivers should be
	  developed in common nutdrv_qx framework
	* UPGRADING: UPGRADING: Cut-off features that did land into master
	  branch to become the 2.7.5 release, vs. big chunks planned now for
	  later releases
	* NEWS: NEWS: update reference to ChangeLog file vs. Git history
	* NEWS: NEWS: refactored upsdebugx() and friends as macros for
	  NUT-2.7.5
	* NEWS: NEWS: HCL updated with Ippon Back Comfo Pro II 650/850/1050
	  (USB) for NUT-2.7.5
	* NEWS: NEWS: added and clarified many battery.* protocol variables
	  for NUT-2.7.5
	* NEWS: NEWS: netxml-ups battery info fixed for NUT-2.7.5
	* NEWS: NEWS: HCL updated with Opti-UPS PS1500E (USB) for NUT-2.7.5
	* NEWS: NEWS: referenced Date and Time representations preferred for
	  NUT-2.7.5
	* NEWS: NEWS: added generic_modbus driver for NUT-2.7.5
	* NEWS: NEWS: updated systemd integration for NUT-2.7.5
	* NEWS: NEWS: added autoconf-2.70 update for NUT-2.7.5
	* NEWS: NEWS: added portable Makefile effort for NUT-2.7.5
	* NEWS: NEWS: added incremental "make spellcheck" support for
	  NUT-2.7.5
	* NEWS: NEWS: Cut-off features that did land into master branch to
	  become the 2.7.5 release, vs. big chunks planned now for later
	  releases
	* NEWS: NEWS: added DISABLE_WEAK_SSL for NUT-2.7.5

2021-06-30  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: mention `experimental.*` namespace
	* NEWS: NEWS: mention that master/slave deprecation did not impact
	  protocol currently
	* NEWS: NEWS: mark libusb-1.0 support in main branch as "expected"
	  currently

2021-05-24  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: added powerpanel driver support for CyberPower
	  OR1500LCDRTXL2U in NUT-2.7.5
	* NEWS: NEWS: added TcpClient C++ testing mock for NUT-2.7.5
	* NEWS: NEWS: improved USB HID parsing for NUT-2.7.5
	* NEWS: NEWS: improved USB device matching for NUT-2.7.5
	* NEWS: NEWS: microsol-apc added for NUT-2.7.5

2021-04-23  Jim Klimov <jim@jimklimov.com>

	* NEWS, docs/nut.dict: docs/nut.dict + NEWS: fix both to pass
	  spellcheck

2021-04-21  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: Add 2.7.5 support for Tripplite AVR750U

2021-04-20  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: List more achievements of 2.7.5

2020-01-20  Jim Klimov <jim@jimklimov.com>

	* NEWS: NEWS: described nut-driver-enumerator introduction

2019-03-15  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS: Add entry for openssl-1.1.0 support

2019-03-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut.dict: Update spelling dictionary

2019-02-28  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS: Update NEWS for next release

2018-02-28  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/nut.dict: Add Avocent to the spell check list

2018-02-27  Arnaud Quette <ArnaudQuette@Eaton.com>

	* NEWS: Update NEWS for Emerson Avocent PM3000 PDU

2017-11-17  Arnaud Quette <ArnaudQuette@Eaton.com>

	* NEWS: Update NEWS for next release
	* NEWS: Update NEWS for next release

2017-10-08  Charles Lepple <clepple+nut@gmail.com>

	* NEWS, UPGRADING, docs/nut.dict: Spell-check release notes
	* NEWS, UPGRADING: Update NEWS and UPGRADING for next release
	  Current as of master @ b8df06b761, assuming libusb-1.0+0.1 gets
	  merged

2021-09-22  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: cosmetically
	  update OmniOS notes
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: comment a
	  TODO for NAT setup desired
	* docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-setup.txt: comment why
	  LXC+LIBVIRT
	* docs/ci-farm-lxc-setup.txt, docs/config-prereqs.txt, docs/user-
	  manual.txt: docs/config-prereq.txt + ci-farm-lxc-setup.txt + user-
	  manual.txt: fix markup so new docs can be chapters in user-
	  manual.html

2021-09-21  Jim Klimov <jim@jimklimov.com>

	* scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in:
	  scripts/Solaris/preremove.in + postinstall.in: configure sanity
	  checker likes datarootdir more than datadir
	* ci_build.sh: ci_build.sh: fix reported BUILD_TYPE for default-
	  spellcheck builds

2021-09-21  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/Makefile.am: docs/Makefile.am: try to avoid "warning: ignoring
	  prerequisites on suffix rule definition"
	* docs/Makefile.am: docs/Makefile.am: when calling a sub-make for
	  *-spellchecked rule, make sure to use the
	  "$(abs_top_builddir)/docs/Makefile" (the original "top_builddir"
	  might come from outer caller in another subdir)
	* docs/Makefile.am: docs/Makefile.am: move reading of the
	  spellchecked file out of the pipe so errors finding one are exposed
	  to build result
	* conf/Makefile.am, data/Makefile.am, docs/Makefile.am,
	  docs/man/Makefile.am: docs/Makefile.am: conjure a portable
	  *-spellchecked rule that works for non-GNU make tools
	* docs/Makefile.am: docs/Makefile.am: comment about a non-portable
	  GNU Make feature use
	* docs/Makefile.am: docs/Makefile.am: for no-op *-spellchecked rule,
	  report SKIP-ASPELL with the target (touchfile) name to avoid
	  source-text determination
	* docs/Makefile.am: docs/Makefile.am: be sure to run the quiet sub-
	  make using docs/Makefile.am to use its target definitions
	* docs/Makefile.am: docs/Makefile.am: if SPELLCHECK_ENV_DEBUG, report
	  which file we would spellcheck (quiet sub-make might do and report
	  nothing for an already checked text)
	* docs/Makefile.am: docs/Makefile.am: consider "-spellchecked" among
	  SUFFIXes
	* docs/Makefile.am: docs/Makefile.am: comment about a non-portable
	  GNU Make feature use

2021-09-21  Jim Klimov <jim@jimklimov.com>

	* .gitignore, Makefile.am, conf/Makefile.am, data/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  lib/Makefile.am, scripts/augeas/Makefile.am,
	  scripts/ufw/Makefile.am, tools/nut-scanner/Makefile.am: Makefiles:
	  change from *.spellchecked suffix pattern to *-spellchecked which
	  is easier to plug into POSIX make rulesets
	* Makefile.am, conf/Makefile.am, configure.ac, data/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  lib/Makefile.am, scripts/Makefile.am, scripts/augeas/Makefile.am,
	  scripts/ufw/Makefile.am, tools/nut-scanner/Makefile.am: Makefiles +
	  configure.ac: add a way to "make clean" away the *.spellchecked
	  touch-files
	* .gitignore, conf/Makefile.am, data/Makefile.am, docs/Makefile.am,
	  docs/man/Makefile.am: Makefiles: mark every spellchecked text file
	  with a touch-file to not re-test it again needlessly (at a cost of
	  some noise for some implementations of make)

2021-09-21  Jim Klimov <jimklimov@gmail.com>

	* drivers/legrand-hid.c: Update legrand-hid.c  Address build warnings
	  from CI

2021-09-21  Jim Klimov <jim@jimklimov.com>

	* scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in:
	  scripts/Solaris/preremove.in + postinstall.in: configure sanity
	  checker likes datarootdir more than datadir
	* ci_build.sh: ci_build.sh: fix reported BUILD_TYPE for default-
	  spellcheck builds

2021-09-21  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/Makefile.am: docs/Makefile.am: try to avoid "warning: ignoring
	  prerequisites on suffix rule definition"
	* docs/Makefile.am: docs/Makefile.am: when calling a sub-make for
	  *-spellchecked rule, make sure to use the
	  "$(abs_top_builddir)/docs/Makefile" (the original "top_builddir"
	  might come from outer caller in another subdir)
	* docs/Makefile.am: docs/Makefile.am: move reading of the
	  spellchecked file out of the pipe so errors finding one are exposed
	  to build result
	* conf/Makefile.am, data/Makefile.am, docs/Makefile.am,
	  docs/man/Makefile.am: docs/Makefile.am: conjure a portable
	  *-spellchecked rule that works for non-GNU make tools
	* docs/Makefile.am: docs/Makefile.am: comment about a non-portable
	  GNU Make feature use
	* docs/Makefile.am: docs/Makefile.am: for no-op *-spellchecked rule,
	  report SKIP-ASPELL with the target (touchfile) name to avoid
	  source-text determination
	* docs/Makefile.am: docs/Makefile.am: be sure to run the quiet sub-
	  make using docs/Makefile.am to use its target definitions
	* docs/Makefile.am: docs/Makefile.am: if SPELLCHECK_ENV_DEBUG, report
	  which file we would spellcheck (quiet sub-make might do and report
	  nothing for an already checked text)
	* docs/Makefile.am: docs/Makefile.am: consider "-spellchecked" among
	  SUFFIXes
	* docs/Makefile.am: docs/Makefile.am: comment about a non-portable
	  GNU Make feature use

2021-09-21  Jim Klimov <jim@jimklimov.com>

	* .gitignore, Makefile.am, conf/Makefile.am, data/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  lib/Makefile.am, scripts/augeas/Makefile.am,
	  scripts/ufw/Makefile.am, tools/nut-scanner/Makefile.am: Makefiles:
	  change from *.spellchecked suffix pattern to *-spellchecked which
	  is easier to plug into POSIX make rulesets
	* Makefile.am, conf/Makefile.am, configure.ac, data/Makefile.am,
	  docs/Makefile.am, docs/cables/Makefile.am, docs/man/Makefile.am,
	  lib/Makefile.am, scripts/Makefile.am, scripts/augeas/Makefile.am,
	  scripts/ufw/Makefile.am, tools/nut-scanner/Makefile.am: Makefiles +
	  configure.ac: add a way to "make clean" away the *.spellchecked
	  touch-files
	* .gitignore, conf/Makefile.am, data/Makefile.am, docs/Makefile.am,
	  docs/man/Makefile.am: Makefiles: mark every spellchecked text file
	  with a touch-file to not re-test it again needlessly (at a cost of
	  some noise for some implementations of make)
	* docs/nut.dict: docs/nut.dict: update for recent changes
	* docs/man/apcsmart.txt, docs/man/generic_modbus.txt:
	  docs/man/apcsmart.txt: fix an indented block
	* docs/man/apcsmart.txt, docs/man/generic_modbus.txt:
	  docs/man/generic_modbus.txt + apcsmart.txt: drop "[source, conf]"
	  decorators for sample configs and ASCII-art, pygmentize needs much
	  setup to render that
	* docs/config-prereqs.txt: docs/config-prereqs.txt: add "pygmentize"
	  packages to the list, for HTML rendering of "source" blocks
	* docs/man/generic_modbus.txt: docs/man/generic_modbus.txt: import a
	  note from discussion at NUT issue #1056 about the data-path and
	  generic use for the modbus driver
	* docs/man/generic_modbus.txt: docs/man/generic_modbus.txt: line-wrap
	  long paragraphs
	* tests/nutlogtest.c: tests/nutlogtest.c: fix more fallout from #675
	* configure.ac, m4/nut_check_libnss.m4: m4/nut_check_libnss.m4: fix
	  deterministic 32/64 bit builds (on illumos/solaris family of OSes
	  at least)
	* ci_build.sh: ci_build.sh: tweak PKG_CONFIG_PATH setting for 64-bit
	  dirs on illumos/solaris and related operating systems (otherwise
	  pkg-config reports default data, can be for 32-bit libs, on 64-bit
	  hosts)
	* ci_build.sh: ci_build.sh: report detected CI_OS_NAME if we had to
	  guess
	* ci_build.sh: ci_build.sh: for developer workstation use, detect
	  CI_OS_NAME via uname as a fallback (if CI vars are not provided)
	* ci_build.sh: ci_build.sh: recognize CI_OS_NAME from case-
	  insensitive match of "$OS_FAMILY-$OS_DISTRO", and recognize
	  solaris+sunos
	* include/common.h: Fix some fallout from PR #685  * The
	  parenthesized "(label)" in debug macros is a safer expansion than
	  the original "label" * Avoid the dangling "args..." that may be
	  not-specified by caller (strict-C99 compat)
	* docs/Makefile.am: docs/Makefile.am: do not spellcheck ../INSTALL
	  which is generated
	* ci_build.sh: ci_build.sh: run the first spellcheck really quietly
	* docs/Makefile.am, docs/nut.dict: docs/Makefile.am + docs/nut.dict:
	  add more texts from base dir to spellcheck them too
	* docs/Makefile.am: docs/Makefile.am: report the directory relative
	  to which spellchecked text sources failed
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: use ci_build.sh to
	  spellcheck with a more user-friendly output
	* ci_build.sh: ci_build.sh: extend the BUILD_TYPE=default-spellcheck
	  to do a quiet round first, and only report details about failed
	  files if needed
	* ci_build.sh: ci_build.sh: fallback BUILD_WARNFATAL=true/false
	  handling; comment values for BUILD_WARNOPT

2021-09-20  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict: update for recently added docs and
	  merged PRs, and update sorting
	* docs/config-prereqs.txt: config-prereqs.txt: fix markup to become
	  asciidoc

2021-09-20  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/Makefile.am, docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-
	  setup.txt + docs/Makefile.am: update some notes and ability to
	  build the new doc

2021-09-20  Jim Klimov <jim@jimklimov.com>

	* docs/ci-farm-lxc-setup.txt: ci-farm-lxc-setup.txt: update with
	  notes for "chroot apt-get" tricks
	* docs/ci-farm-lxc-setup.txt: ci-farm-lxc-setup.txt: fix markup to
	  become asciidoc

2021-09-21  Jim Klimov <jim@jimklimov.com>

	* docs/man/generic_modbus.txt: docs/man/generic_modbus.txt: some
	  whitespace issues
	* m4/nut_type_socklen_t.m4: [NUT issue #1053]
	  m4/nut_type_socklen_t.m4: convert one remaining
	  AC_TRY_COMPILE(H,M,S) into modern
	  AC_COMPILE_IFELSE(AC_LANG_PROGRAM(H,M), S)
	* configure.ac: [NUT issue #1053] configure.ac: apply recommendations
	  of "autoupdate" and warnings from "autoconf" for autotools-2.70

2021-09-20  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: config-prereqs.txt: fix markup to become
	  asciidoc
	* tests/.gitignore: GitIgnore test log and trace for "nutlogtest"

2021-09-20  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/Makefile.am, docs/ci-farm-lxc-setup.txt: docs/ci-farm-lxc-
	  setup.txt + docs/Makefile.am: update some notes and ability to
	  build the new doc

2021-09-20  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict: ordering and typo fixes in the
	  dictionary :)
	* docs/ci-farm-lxc-setup.txt: ci-farm-lxc-setup.txt: update with
	  notes for "chroot apt-get" tricks

2021-09-19  Jim Klimov <jim@jimklimov.com>

	* docs/nut-names.txt: docs/nut-names.txt: refactor the standalone
	  Time and Date format chapter

2021-09-20  Jim Klimov <jim@jimklimov.com>

	* docs/ci-farm-lxc-setup.txt: ci-farm-lxc-setup.txt: fix markup to
	  become asciidoc

2021-09-19  Jim Klimov <jimklimov+nut@gmail.com>

	* docs/ci-farm-lxc-setup.txt: Introduce docs/ci-farm-lxc-setup.txt
	  with setup notes
	* docs/ci-farm-lxc-setup.txt: Introduce docs/ci-farm-lxc-setup.txt
	  with setup notes

2021-09-17  Jim Klimov <jimklimov@gmail.com>

	* Jenkinsfile-dynamatrix: Update Jenkinsfile-dynamatrix  Revise
	  pattern for Makefiles and similar
	* Jenkinsfile-dynamatrix: Update Jenkinsfile-dynamatrix  Do not apply
	  filename regex filtering to main branch builds so they can always
	  serve as a reference
	* Jenkinsfile-dynamatrix: Update Jenkinsfile-dynamatrix  Remove
	  'default' target as it brings little value: default-tgt:distcheck-
	  valgrind tests the distcheck part, and default-nodoc tests the main
	  recipe with default settings and no distcheck (both skip/disable
	  docs).

2021-09-17  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: modularize the way
	  to constrain build scenarios not relevant to the changed files
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: find a way to
	  constrain build scenarios not relevant to the changed files (e.g.
	  no big rebuilds for a docs-only change)

2021-09-16  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict
	* docs/nut.dict: Update nut.dict
	* docs/nut-names.txt: Update nut-names.txt  Clarified an ambiguity
	  typo about time format, added examples for data with time zones

2021-09-16  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: change ulon to uint_32
	* drivers/generic_modbus.h: fix forward declarations of enum
	  occurances

2021-09-15  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Update for PR #1076
	* docs/nut.dict: Update nut.dict  Add "FTTx" for PR #1061
	* tests/getvaluetest.c: Update getvaluetest.c  Include NUT "common.h"
	  for NUT_UNUSED_VARIABLE among other things
	* tests/getvaluetest.c: getvaluetest.c: Fixing a NUT_UNUSED_VARIABLE

2021-09-15  Jim Klimov <jim@jimklimov.com>

	* clients/upsclient.c: upsclient.c: log upscli_init() as a no-op in
	  case of builds without SSL
	* clients/upsclient.c: upsclient.c: add NUT_UNUSED_VARIABLE for the
	  stub implem in case of builds without SSL
	* server/netssl.c: netssl.c: add NUT_UNUSED_VARIABLE for the stub
	  implem in case of builds without SSL
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: limit default-
	  withdoc(:man) scenarios to not iterate compiler variants, only OSes
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: add a comment with
	  overview of the dynacfgPipeline.slowBuild goals and trade-offs
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: add a groovy
	  shebang for highlighters
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: rephrase some
	  comments and filter bundle names

2021-09-14  dtsecon <dimitris.s.economou@gmail.com>

	* docs/nut.dict: update nut.dict
	* docs/nut.dict: update nut.dic

2021-09-13  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: only run and
	  withdocs:man on setups that did not yet run a witdocs:all (and are
	  declared capable of man)
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: remove distcheck-
	  light (sort of pointless WRT other scenarios) and withdocs:man
	  (redundant) from "various builds"
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: comment that
	  "default-all-errors" builds do not include docs and distcheck
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: add "default-
	  alldrv:no-distcheck" variant
	* ci_build.sh: ci_build.sh: add "default-alldrv:no-distcheck" variant
	* ci_build.sh: ci_build.sh: comment "default-all-errors" builds with
	  varying SSL implementations and refactor into a loop and case
	  Should be helftul for https://github.com/networkupstools/jenkins-
	  dynamatrix/issues/4 eventually
	* ci_build.sh: ci_build.sh: comment the case BUILD_TYPE to maintain
	  easier

2021-09-12  Jim Klimov <jimklimov+nut@gmail.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: reduce the amount
	  of build combos by careful use of dynamatrixAxesCommonEnv

2021-09-11  Jim Klimov <jimklimov+nut@gmail.com>

	* tests/cpputest.cpp: tests/cpputest.cpp: add an optional verbose
	  mode to list executed test case names
	* configure.ac: ci_build.sh: actively check that cppunit is not just
	  installed, but is usable with current compiler toolkit (we saw
	  linking issues and runtime segfaults with it)
	* ci_build.sh: ci_build.sh: update a comment for OpenIndiana gcc-4.x
	  vs. libgd
	* ci_build.sh: ci_build.sh: skip CGI builds for openindiana with
	  gcc-4.x (or older, preemptively) for now
	* ci_build.sh: ci_build.sh: update constraints for libgd/cgi builds
	  on freebsd
	* ci_build.sh: ci_build.sh: fix --disable-cppunit (not --without-
	  cppunit)

2021-09-11  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: constrain autotools
	  builds to "*fightwarn*" branches and PRs

2021-06-14  Doug Nazar <nazard@nazar.ca>

	* server/netssl.c: server: Add warning if DISABLE_WEAK_SSL is not
	  enabled.

2021-06-12  Jim Klimov <jimklimov@gmail.com>

	* server/netssl.c: Update netssl.c  Comment the default value of
	  `disable_weak_ssl` (currently not getting in our way, but can
	  change later)
	* server/netssl.c: Update netssl.c  Slight pedantic fix for use of
	  NSS VMAJOR/VMINOR macros
	* server/conf.c: Update conf.c  Comment parse_boolean() and add
	  support for "0" and "1" string values there, for good measure
	* conf/upsd.conf.sample: Update upsd.conf.sample  Mention that
	  DISABLE_WEAK_SSL is "currently" disabled by default, hinting that
	  it can become enabled after some releases.
	* docs/nut.dict: Update nut.dict  Add "TLSv"<number> support in
	  spellchecker

2021-06-11  Doug Nazar <nazard@nazar.ca>

	* conf/upsd.conf.sample, server/conf.c, server/netssl.c,
	  server/netssl.h: server: Add option to disable weak SSL
	  protocols/ciphers.

2021-09-01  Arnaud Quette <arnaud.quette@gmail.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/powerware-mib.c,
	  drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: Add a generic
	  function to convert date (#1078)  This provides conversion from US
	  date (mm/dd/yyyy) to ISO Calendar date (yyyy-mm-dd). Also adapt the
	  function callback mechanism to make it more generic, and only char*
	  to char* reformating, beside from the int to char* value lookup.
	  Co-authored-by: Jim Klimov <jim@jimklimov.com>

2021-08-03  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.h, clients/nutclientmem.cpp,
	  clients/nutclientmem.h: clients/nutclient.h + nutclientmem.h/.cpp:
	  add NUT_UNUSED_VARIABLE() where needed
	* drivers/libshut.h: drivers/libshut.h: define the Device field
	  recently added to USBDevice_t
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: initialize the recently
	  added USBDevice_t Device field
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  fix the switch-case fallthrough that should not be (the case of "s"
	  is handled lower in the routine, so instant return is not logical)
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  complete the item_t initializers
	* drivers/nutdrv_qx_masterguard.c: drivers/nutdrv_qx_masterguard.c:
	  be explicit about NUT_UNUSED_VARIABLEs

2021-07-20  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common/common.c: avoid C++ style comments

2021-05-25  Jim Klimov <jim@jimklimov.com>

	* docs/images/ci/fosshost.org_Host_Light_309px.png,
	  docs/images/ci/fosshost.org_Host_Light_38px.png: docs/image/ci: add
	  more Fosshost logos tuned to be readable at smaller height

2021-04-26  Jim Klimov <jim@jimklimov.com>

	* docs/man/dummy-ups.txt: dummy-ups.txt: mention the DDL and nut-ddl-
	  dump.sh

2021-08-27  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: note caveats
	  about installing cppunit and gcc-4.4.4 on OpenIndiana

2021-08-07  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: suggest
	  installing valgrind where available

2021-08-04  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: suggest
	  installing source-highlight where available

2021-08-03  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/config-prereqs.txt: list prerequisites for at
	  least a minimal build in OmniOS CE - update spellchecker
	* docs/config-prereqs.txt: docs/config-prereqs.txt: list
	  prerequisites for at least a minimal build in OmniOS CE
	* docs/config-prereqs.txt: docs/config-prereqs.txt: document libtool
	  as a prerequisite

2021-08-02  Jim Klimov <jim@jimklimov.com>

	* docs/config-prereqs.txt: docs/config-prereqs.txt: revise
	  installation of supported shell interpreters
	* docs/config-prereqs.txt: docs/config-prereqs.txt: add en-aspell for
	  freebsd profile

2021-08-01  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/config-prereqs.txt, docs/nut.dict,
	  docs/packager-guide.txt, docs/user-manual.txt: Introduce
	  docs/config-prereqs.txt and spellcheck for it

2021-08-11  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: revise use of
	  requiredNodelabels/excludedNodelabels, and reset them to surely
	  delete any cached values in the reusable dynamatrix object
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: keep docs builds to
	  the standard set of builders (nut-builder not doc-builder)

2021-08-10  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: use a custom-named
	  dynacfgPipeline.stashnameSrc
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: neuter the example
	  buildCommit
	* Jenkinsfile-dynamatrix: Revert "Jenkinsfile-dynamatrix: list the
	  custom commits built on new NUT CI for initial history"  This
	  reverts commit c9b5c870ac6834f16ebecb5334ac178de2d03d3d. Have that
	  list in history but do not clutter live version.
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: list the custom
	  commits built on new NUT CI for initial history
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: revise docs-all
	  build spec
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: modernize example
	  for custom replayed builds

2021-08-04  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: double-quote path var expansions
	* ci_build.sh: ci_build.sh: detect build agent capabilities for
	  Jenkins builds with NUT dynaMatrix config
	* ci_build.sh: ci_build.sh: abstract from TRAVIS_OS_NAME to
	  CI_OS_NAME and set one for Jenkins builds with NUT dynaMatrix
	  config

2021-08-03  Jim Klimov <jimklimov@gmail.com>

	* configure.ac: configure.ac: hack around libtool when building with
	  custom bitness

2021-08-03  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: define autotools-
	  based distcheck for NUT
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: define autotools-
	  based distcheck for NUT
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: explicitly exclude
	  openindiana from build scenario with all docs types
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: typo fix
	  (require*d*Nodelabels after upstream refactor)
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: do not pass
	  "-Wno-unknown-warning" to GCC
	* m4/nut_check_libavahi.m4: m4/nut_check_libavahi.m4: PoC enable
	  avahi build in FreeBSD - rearrange

2021-08-02  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Revert "Jenkinsfile-dynamatrix: try to
	  synchronize cloning of dsbcClone+stageNameClone"  This reverts
	  commit 2d477fac1c67f7a8477c550f1e5a638e533ab2ad : "synchronized" is
	  not supported for Jenkins Groovy CPS
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: try to synchronize
	  cloning of dsbcClone+stageNameClone
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: define
	  dsbcClone+stageNameClone closer to start of closure to get the
	  correct copy ASAP
	* Jenkinsfile-dynamatrix: Jenkinsfile-dynamatrix: add
	  SERVICE_FRAMEWORK="selftest" to shellcheck-nde (equivalent)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in: check for not-supported (t)csh interpreter
	* Makefile.am: Makefile.am: add SERVICE_FRAMEWORK="selftest" to
	  shellcheck-nde
	* Makefile.am: Makefile.am: add shellcheck-nde
	* Makefile.am: Makefile.am: fix shellcheck (not all OSes serve
	  /bin/bash at that pathname)

2021-07-31  Jim Klimov <jimklimov+nut@gmail.com>

	* m4/nut_check_libavahi.m4: m4/nut_check_libavahi.m4: PoC enable
	  avahi build in FreeBSD
	* m4/nut_check_libneon.m4: m4/nut_check_libneon.m4: FreeBSD installs
	  stuff under /usr/local

2021-07-28  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: report CONFIGURING NUT in a way
	  friendlier for copy-paste
	* configure.ac, m4/nut_compiler_family.m4: configure.ac +
	  m4/nut_compiler_family.m4: introduce NUT_COMPILER_FAMILY_FLAGS to
	  propagate -Wno-unknown-warning(-opton) before any pkgconfig
	* docs/man/Makefile.am: docs/man/Makefile.am: Fix check-man-txt to
	  also run from separate build dirs
	* ci_build.sh: ci_build.sh: do not make TOO MUCH noise when dumping
	  config.log
	* ci_build.sh: ci_build.sh: set DISTCHECK_FLAGS in "default-tgt:"*
	  handling too

2021-07-27  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: introduce BUILD_TYPE=default-withdoc:man
	  (and allow it)
	* .gitignore: GitIgnore CI-generated log files
	* ci_build.sh: ci_build.sh: introduce BUILD_TYPE=default-withdoc:man
	* ci_build.sh: ci_build.sh: make sure DISTCHECK_FLAGS is single-line
	* configure.ac: configure.ac: tell compiler to not choke on unknown
	  options

2021-07-26  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: parameterize $MAKE
	* ci_build.sh: ci_build.sh: try to avoid problems with multi-token
	  CFLAGS etc. when passed from "${CONFIG_OPTS[@]}" array into
	  DISTCHECK_CONFIGURE_FLAGS string (envvar) - refactor

2021-07-22  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: try to avoid problems with multi-token
	  CFLAGS etc. when passed from "${CONFIG_OPTS[@]}" array into
	  DISTCHECK_CONFIGURE_FLAGS string (envvar)

2021-07-20  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: detect if i2c library is usable, and
	  cancel i2c driver build if it is not

2021-06-26  Jim Klimov <jim@jimklimov.com>

	* Makefile.am, configure.ac: configure.ac: follow autotools doc
	  recommendation to automatically update the libtool script if it
	  becomes out-of-date
	* configure.ac: configure.ac: AC_PROG_LIBTOOL is noisily deprecated
	  since autotools-2.70; LT_INIT is the replacement
	* m4/nut_arg_with.m4: m4/nut_arg_with.m4: AC_HELP_STRING is noisily
	  deprecated since autotools-2.70; AS_HELP_STRING is available since
	  2.59 and we use it already a lot elsewhere

2021-04-26  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am: fix truncated comment
	  Text originates from SVN-Git migration in
	  e8e716e0598158f705e060c72f8f4b0444fbcd0f

2021-08-23  Arnaud Quette <ArnaudQuette@eaton.com>

	* docs/nut-names.txt: Complete the date standardization proposal for
	  time

2021-08-20  Arnaud Quette <ArnaudQuette@eaton.com>

	* docs/nut-names.txt: Propose to express dates using ISO 8601 when
	  possible

2021-08-19  Stephan Blecher <_github@blecher.at>

	* drivers/legrand-hid.c: issue-616: legrand 600 fix input voltage

2021-08-18  root <root@proxima2.blecher.at>

	* scripts/upower/95-upower-hid.rules: legrand hid rules update

2021-08-12  Arnaud Quette <arnaud.quette@gmail.com>

	* drivers/mge-xml.c: netxml-ups: fix for erroneous battery info
	  (MGEXML/0.30) (#1069)  Some battery related information were
	  wrongly using output information
	* docs/nut-names.txt: RFC: clarify and complete battery dates (#1063)
	  The existing battery.date means the installation or last
	  replacement date, as it seems to be implemented by various drivers.
	  Add an additional battery.date.maintenance for the next replacement
	  or maintenance date
	* docs/nut-names.txt: Extend battery information collection (#1062)
	  * RFC: Add battery.capacity.nominal   * RFC: add Li-ion battery
	  cell information   * RFC: Add battery.status   * Clarify Li-ion
	  battery cell information  Mention that min/max cell voltage and
	  temperature are observed values, not settings
	* docs/nut-names.txt: RFC: add new variable battery.packs.external
	  (#1060)  * RFC: add new variable battery.packs.external   * Improve
	  wording, as per Charles Lepple feedback   * Improve example values,
	  which can or not be zero-padded

2021-08-01  Jim Klimov <jim@jimklimov.com>

	* Jenkinsfile-dynamatrix: Introduce Jenkinsfile-dynamatrix

2021-07-28  Jim Klimov <jim@jimklimov.com>

	* data/driver.list.in: data/driver.list.in: list Ippon Back Comfo Pro
	  II 650/850/1050 as supported by blazer_usb [#1035]

2021-07-21  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c, drivers/generic_modbus.h: shutdown
	  configurable repetition with increasing time interval added

2021-07-19  dtsecon <dimitris.s.economou@gmail.com>

	* configure.ac, docs/Makefile.am, docs/man/Makefile.am: fix man pages
	  broken build process

2021-07-16  dtsecon <dimitris.s.economou@gmail.com>

	* docs/man/generic_modbus.txt: improve man page
	* docs/man/Makefile.am, docs/man/generic_modbus.txt: man page text
	  created, added in build procedure

2021-07-08  dogtopus <dogtopus@users.noreply.github.com>

	* docs/man/genericups.txt, drivers/genericups.h: genericups: Change
	  type 23 to be active low.  Seems that typical RS232 transceivers
	  inverts the signal automatically anyway, so there's no point of
	  making them active high by default.

2021-07-06  dogtopus <dogtopus@users.noreply.github.com>

	* docs/man/genericups.txt: docs: Document the special line NULL in
	  genericups documentation.
	* drivers/genericups.c: genericups: Bump version number.
	* docs/contact-closure.txt, docs/man/genericups.txt,
	  drivers/genericups.c, drivers/genericups.h: genericups: Add support
	  for FTTx battery backup.  A lot of those "UPSes" use a 4-wire open-
	  drain-like contact closure signaling (dubbed "telemetry interface")
	  to report their status (see https://dl4jz3rbrsfum.cloudfront.net/do
	  cuments/CyberPower_UM_CBN50U48A-1.pdf for example). They are sorta
	  compatible with APC 940-0020B/C cables in terms of pin assignments,
	  with extra signals for replace battery and battery missing and lack
	  of shutdown signal.  This patch adds a sample device type (23) for
	  this kind of device. It also adds support for the extra signal
	  types (RB for replace battery and BYPASS for disconnected battery)
	  used by these devices, as well as an option to unassign/disable an
	  unused signal in the config file by setting it to NULL.  Note that
	  there is no standard cable for this kind of device, so type 23
	  assumes RS232 control signaling and RTS as the voltage source for
	  input pin pullups.

2021-07-06  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c, drivers/generic_modbus.h: fix serial
	  options in modbus_open
	* drivers/generic_modbus.c: fix 'for' loop initial declarations for
	  compatibility out of C99 mode
	* drivers/Makefile.am: generic_modbus.h added to Makefile.am
	* drivers/generic_modbus.c: just one space less

2021-06-30  Nick Briggs <nicholas.h.briggs@gmail.com>

	* tests/.gitignore, tests/Makefile.am, tests/getvaluetest.c: Create
	  test harness for GetValue() report value extraction (usbhid-ups)
	  Adds source and updates Makefile.am to build tests/getvaluetest, a
	  test harness for the report value extraction function GetValue() in
	  hidparser.c.  getvaluetest has some built-in test cases, which are
	  easily extensible, but also accepts a single test specification on
	  the command line to allow for easy experimentation.  getvaluetest
	  -h for usage

2021-06-30  Jim Klimov <jim@jimklimov.com>

	* scripts/systemd/nut-driver-enumerator.service.in,
	  scripts/systemd/nut-driver@.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in:
	  systemd/*.service(.in): update units with SyslogIdentifier=%N  The
	  log identifier should hopefully help make more sense of syslog or
	  journal entries where helper shell script traces might end up.

2021-06-29  Dimitris Economou <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: minor changes to comply with nut
	  development guidelines
	* drivers/generic_modbus.c: variable ctx changed to mbctx

2021-06-25  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: removing unnecessary code
	* drivers/generic_modbus.c: time_ellapsed fixed

2021-06-25  abratchik <alexbratchik@yandex.com>

	* drivers/Makefile.am, drivers/arduino-hid.c, drivers/arduino-hid.h,
	  drivers/usbhid-ups.c, scripts/upower/95-upower-hid.rules: Arduino
	  UPS Support

2021-06-12  abratchik <alexbratchik@yandex.com>

	* docs/FAQ.txt, drivers/libusb.c, drivers/libusb.h, drivers/powervar-
	  hid.c: HID-compliant UPS support with interface gt than 0

2021-06-24  dtsecon <dimitris.s.economou@gmail.com>

	* drivers/generic_modbus.c: minor changes and tidying up
	* drivers/generic_modbus.c: remove unnecessary stuff
	* drivers/generic_modbus.c, drivers/generic_modbus.h: initial commit
	  of generic_modbus beta version source files
	* drivers/Makefile.am: generic_modbus sources add in buidling
	  procedure

2021-06-22  Tom Fifield <tom@tomfifield.net>

	* data/driver.list.in: Opti-UPS PS1500E is supported by blazer_usb
	  Opti-UPS PS1500E connects via serial over USB, and is supported by
	  the blazer_usb driver. This patch updates the compatibility list.
	  Manufacturer link: https://www.opti-
	  ups.com/index.asp?SCID=SC20060001  Device is automatically detected
	  by nut-scanner > [nutdev1] >       driver = "blazer_usb" >
	  port = "auto" >       vendorid = "0665" >       productid = "5161"
	  >       bus = "001"  OB status is correctly detected, and other
	  correct values are displayed when queried: battery.charge: 100
	  battery.voltage: 27.60 battery.voltage.high: 26.00
	  battery.voltage.low: 20.80 battery.voltage.nominal: 24.0
	  device.mfr: device.model: 1500VA device.type: ups driver.name:
	  blazer_usb driver.parameter.bus: 001 driver.parameter.pollinterval:
	  2 driver.parameter.port: auto driver.parameter.productid: 5161
	  driver.parameter.synchronous: no driver.parameter.vendorid: 0665
	  driver.version: 2.7.4 driver.version.internal: 0.12
	  input.current.nominal: 13.0 input.frequency: 60.0
	  input.frequency.nominal: 60 input.voltage: 113.9
	  input.voltage.fault: 111.4 input.voltage.nominal: 110
	  output.voltage: 113.3 ups.beeper.status: enabled
	  ups.delay.shutdown: 30 ups.delay.start: 180 ups.firmware: ups.load:
	  2 ups.mfr: ups.model: 1500VA ups.productid: 5161 ups.status: OL
	  ups.type: offline / line interactive ups.vendorid: 0665

2021-06-18  Scott K Logan <logans@cottsay.net>

	* drivers/tripplite.c: drivers/tripplite.c: start using the 'X' value
	  Relatively ancient documentation seems to suggest that this
	  'firmware checksum' value can be used to indicate the firmware
	  generation as well as the capabilities of the UPS, namely the
	  number of independently controllable plugs.

2021-06-16  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/hidparser.c: Add note regarding sensitivity to 32- vs 64-
	  bit compilation and overflow

2021-06-14  Doug Nazar <nazard@nazar.ca>

	* Makefile.am, conf/Makefile.am, data/Makefile.am, docs/Makefile.am,
	  docs/man/Makefile.am: Fix spellcheck to also run from separate
	  build dirs

2021-06-12  Jim Klimov <jim@jimklimov.com>

	* docs/nut-names.txt: docs/nut-names.txt: add the note about RFC
	  Recording Document
	* docs/nut-names.txt: docs/nut-names.txt: reword the intro paragraphs
	  and define the "experimental.*" namespace
	* docs/FAQ.txt: FAQ.txt: make it easier to find suggestions for
	  missing "battery.charge.restart" workarounds

2021-06-02  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/hidparser.c: Fix GetValue() to correctly extract values
	  from a report when compiled in LP64 mode  Changes the strategy for
	  removing potential garbage bits from values extracted from a
	  report. Use the LogMin and LogMax fields to drive which bits are
	  meaningful but avoid confusion when, for example, given a range of
	  -1..2147483647

2021-05-30  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: bugfix - populate systemdtmpfilesdir in
	  its option, not systemdshutdowndir
	* configure.ac: configure.ac: do not make noise with yet empty
	  systemdtmpfilesdir
	* configure.ac: configure.ac: process other values for
	  systemdshutdowndir option
	* configure.ac: configure.ac: just in case, double-quote to single-
	  tokenize detected systemd related options
	* configure.ac: configure.ac: update comments for systemd related
	  options

2021-05-28  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict: add new words for nut-website
	* configure.ac: configure.ac: improve reporting of systemd options
	  processing
	* autogen.sh, configure.ac, scripts/systemd/.gitignore,
	  scripts/systemd/nut-common.tmpfiles.in: configure.ac: generate
	  scripts/systemd/nut-common.in based on current config
	* configure.ac: configure.ac: typo fix in comment
	* Makefile.am, configure.ac, docs/configure.txt, docs/nut.dict,
	  scripts/systemd/.gitignore, scripts/systemd/Makefile.am,
	  scripts/systemd/nut-common.tmpfiles.in: [Issue #1030] Deliver
	  systemd-tmpfiles config to pre-create runtime locations

2021-05-24  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Update dict for PR #975
	* docs/man/nutdrv_qx.txt: Update nutdrv_qx.txt  Our accepted
	  terminology is for multiple "UPSes" not "UPSen", however
	  questionable the language might be
	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Bump version due to
	  addition of `phoenixtec_command()`
	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Pre-initialize "e = NULL"
	  in phoenixtec_command(), we do not set it from `memchr()` later in
	  all cases.
	* drivers/nutdrv_qx_masterguard.c: Update nutdrv_qx_masterguard.c
	  Add #include <stddef.h>
	* drivers/powerpanel.h: Update powerpanel.h  Define a subdriver_t for
	  driver version (modifiable) vs type (bin/txt)
	* drivers/powerp-txt.c: Update powerp-txt.c  Fix subdriver type vs
	  subdriver version
	* drivers/powerp-bin.c: Update powerp-bin.c  Track subdriver version
	* drivers/powerp-txt.c: Update powerp-txt.c  Introduce versioning
	* drivers/cyberpower-mib.c: Update cyberpower-mib.c  Update reported
	  driver version after the bump
	* drivers/cyberpower-mib.c: Update cyberpower-mib.c  Handle
	  "battery.voltage" and "battery.current" readings for different MIB
	  revisions

2021-05-24  Jim Klimov <jim@jimklimov.com>

	* lib/.gitignore: GitIgnore generated lib/libnutclientstub.pc

2021-05-24  Jim Klimov <jimklimov@gmail.com>

	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Formatting and slight
	  rewording of a comment

2021-05-24  Jim Klimov <jim@jimklimov.com>

	* drivers/usb-common.h: drivers/usb-common.h: better comment "the 5
	  pieces of information by which a USB device identifies itself"
	* drivers/usb-common.h: drivers/usb-common.h: move the recently added
	  USBDevice_t Device field to the end, for a bit of cross-version
	  binary compatibility
	* docs/man/blazer-common.txt, docs/man/nutdrv_qx.txt,
	  docs/man/tripplite_usb.txt, docs/man/usbhid-ups.txt: Docs: rephrase
	  Note for "device" option in USB drivers

2021-05-18  Clappier, Eric <EricClappier@Eaton.com>

	* tests/nutclienttest.cpp: Fix typo

2021-05-17  Clappier, Eric <EricClappier@Eaton.com>

	* clients/nutclientmem.cpp, clients/nutclientmem.h,
	  tests/nutclienttest.cpp: Take into account pull request remarks

2021-05-07  Clappier, Eric <EricClappier@Eaton.com>

	* drivers/bcmxcp_ser.c: Fix coverity test issue
	* tests/nutclienttest.cpp: Try fixing coverity test issue
	* clients/Makefile.am, configure.ac, lib/Makefile.am,
	  lib/libnutclientstub.pc.in, tests/Makefile.am: Separate lib for
	  stub

2021-05-05  Clappier, Eric <EricClappier@Eaton.com>

	* tests/nutclienttest.cpp: Add tests in cppunit
	* clients/Makefile.am: Fix missing header

2021-05-04  Clappier, Eric <EricClappier@Eaton.com>

	* clients/Makefile.am, clients/{nutclientmock.cpp =>
	  nutclientmem.cpp}, clients/{nutclientmock.h => nutclientmem.h},
	  tests/nutclienttest.cpp: Rename class  Fix cppunit test  Add
	  typedef for map
	* clients/nutclientmock.cpp: Fix indentation
	* clients/Makefile.am, clients/nutclient.cpp, clients/nutclient.h,
	  clients/nutclientmock.cpp, clients/nutclientmock.h: Separate
	  NutClientMock class
	* clients/nutclient.cpp, clients/nutclient.h,
	  tests/nutclienttest.cpp: Add mock for TcpClient

2021-05-20  Denis Yurin <d.jurin@gmail.com>

	* drivers/powercom-hid.c: add temperature readings for Powercom
	  MRT-3000  add temperature readings support for Powercom MRT-3000

2021-05-18  Alexey Kazancev <ruskazancev@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx.c: bump version to 0.31
	* drivers/nutdrv_qx.c: nutdrv_qx.c: add batt.volt.act validation
	  Some UPS return zero batt voltage after communication error. This
	  validation must fix wrong runtime calculation.
	* drivers/nutdrv_qx.c: nutdrv_qx.c: fix snr_command communication
	  error in protocol matching phase.

2021-05-06  Alexey Kazancev <ruskazancev@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx.c: bump version to 0.30

2021-04-26  Alexey Kazancev <ruskazancev@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx.c: add correction of runtime
	  estimation

2021-04-23  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c:
	  fabula_hunnox_subdriver(): annotate NUT_UNUSED_VARIABLE(device) arg
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c: fix
	  initialization of delta_ups_type_info[]
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c: fix
	  initialization of delta_ups_type_info[]
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c:
	  fabula_hunnox_subdriver(): annotate NUT_UNUSED_VARIABLE(device) arg
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: order includes and
	  subdrivers alphabetically
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: order includes and
	  subdrivers alphabetically
	* clients/nutclient.cpp, clients/nutclient.h:
	  clients/nutclient.{h,cpp}: explicitly request assignment operator
	  generation for exception classes

2021-04-09  Jim Klimov <jim@jimklimov.com>

	* drivers/metasys.c: drivers/metasys.c: fix SIZE_MAX comparison
	* drivers/metasys.c: drivers/metasys.c: fix %zd printing of ssize_t
	  res

2021-03-31  Jim Klimov <jim@jimklimov.com>

	* drivers/metasys.c: drivers/metasys.c: protect failsafe logic from
	  compiler warnings with pragmas
	* drivers/metasys.c: drivers/metasys.c: upsdrv_initinfo(): pedantic
	  and stylistic fixes
	* drivers/metasys.c: drivers/metasys.c: upsdrv_initinfo(): sanity-
	  check that reply was big enough to have a serial number, and then
	  cast for memcpy()
	* drivers/metasys.c: drivers/metasys.c: get_answer(): rectify var
	  types to avoid signedness and range warnings
	* drivers/metasys.c: drivers/metasys.c: fix arg type for
	  send_read_command() to avoid signedness mismatches
	* drivers/metasys.c: drivers/metasys.c: refactor a get_word_float()
	  to simplify code
	* drivers/metasys.c: drivers/metasys.c: fix fixed-width integers for
	  get_word()/get_long() or cast meaningfully where needed
	* drivers/bcmxcp.c: drivers/bcmxcp.c: cast the bytes when
	  constructing "cbuf[]"s element by element
	* drivers/bcmxcp.c: drivers/bcmxcp.c: instcmd(): cast use of sddelay
	  to avoid signedness warnings
	* drivers/bcmxcp.c: drivers/bcmxcp.c: upsdrv_initinfo(): buf is
	  size_t by usage
	* drivers/bcmxcp.c: drivers/bcmxcp.c: upsdrv_initinfo(): fix atoi()
	  of unsigned value for shutdown_delay
	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix fixed-width integers for
	  get_word()/get_long()/init_outlet() or cast meaningfully where
	  needed
	* drivers/al175.c: drivers/al175.c: avoid implicit conversion of byte
	  to int during bit-shifting

2021-03-30  Jim Klimov <jim@jimklimov.com>

	* drivers/al175.c: drivers/al175.c: avoid implicit tcflag_t
	  signedness conversion
	* drivers/al175.c: drivers/al175.c: avoid implicit char/byte
	  conversion
	* drivers/al175.c: drivers/al175.c: avoid implicit long/unsigned long
	  conversion, and fix formatting nearby
	* drivers/al175.c: drivers/al175.c: align arguments to wrappers of
	  al175_do() with the uint16_t type it accepts (avoid variable-width
	  signed int)
	* drivers/libusb.c: drivers/libusb.c: mark hid_rep_index static (not
	  externalized)

2021-01-20  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-ats16-nm2-mib.c, drivers/eaton-ats16-nmc-mib.c:
	  eaton-ats16-nm?-mib.c: port comments from 42ity fork to clarify
	  what is going on here for mib2nut_info_t definitions
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  comment about not-function pointers from libnet-snmp
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: fix
	  indentations and whitespaces
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: fix indentations and whitespaces
	* tools/nut-scanner/nut-scanner.c: nut-scanner.c: some extra
	  whitespace, some missing, in longopts[]

2021-01-06  Jim Klimov <jim@jimklimov.com>

	* server/netssl.c: server/netssl.c: #include "nut_stdint.h" for
	  limits definitions
	* clients/upscmd.c, clients/upsimage.c, clients/upsmon.c,
	  clients/upsrw.c, clients/upsstats.c, common/common.c, common/str.c,
	  drivers/al175.c, drivers/bcmxcp.c, drivers/bcmxcp_ser.c,
	  drivers/bcmxcp_usb.c, drivers/bestfortress.c, drivers/etapro.c,
	  drivers/genericups.c, drivers/metasys.c, drivers/netxml-ups.c,
	  drivers/nutdrv_siemens_sitop.c, drivers/powercom.h,
	  drivers/richcomm_usb.c, drivers/serial.c, drivers/snmp-ups.c,
	  server/upsd.c: Various sources: use nut_stdint.h where limits.h was
	  introduced recently
	* configure.ac, include/nut_stdint.h: nut_stdint.h: include limits.h
	  and make sure SIZE_MAX is defined

2020-12-27  Jim Klimov <jim@jimklimov.com>

	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: fix size_t types
	  for upsdebugx_hex() and range-check the values
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix static const struct
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix whitespace
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix static const struct

2020-12-26  Jim Klimov <jim@jimklimov.com>

	* server/conf.c, server/upsd.c, server/upsd.h: server/upsd.{c,h}
	  conf.c: fix maxconn to long, to match sysconf() return value; check
	  that practical value range allows to malloc() the buffers
	* server/upsd.c: server/upsd.c: fix size_t/ssize_t types for
	  {ssl_,}write() in sendback()
	* server/netssl.c, server/netssl.h: server/netssl.{c,h}: fix
	  ssl_write()/ssl_read() to return ssize_t (like upsclient
	  net_write()/net_read())
	* server/netssl.c: server/netssl.c: fix int types for OpenSSL
	  codepaths
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: fix numphases to
	  unsigned int
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: fix int size_t
	  types for read(), malloc() etc.
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: fix size_t types
	  for upsdebugx_hex() and some indentation
	* drivers/isbmex.c: drivers/isbmex.c: fix int size_t types for
	  read(), malloc() etc.
	* drivers/genericups.c: drivers/genericups.c: fix int types for
	  sleep()
	* drivers/genericups.c: drivers/genericups.c: cast termios types for
	  bit magic
	* drivers/gamatronic.h: drivers/gamatronic.h: fix speed_t/size_t in
	  baud_rates[] definition like for bcmxcp_ser
	* drivers/gamatronic.c: drivers/gamatronic.c: fix some whitespace
	* drivers/gamatronic.c: drivers/gamatronic.c: fix int size_t types
	  for read(), malloc() etc.
	* drivers/etapro.c: drivers/etapro.c: constrain return value for
	  etapro_get_response() type
	* drivers/bestuferrups.c: drivers/bestuferrups.c: fix size_t int type
	  for execute() (use-cases pass sizeof() anyway)
	* drivers/bestfortress.c: drivers/bestfortress.c: constrain value for
	  usleep() in upssend()
	* drivers/bestfortress.c: drivers/bestfortress.c: constrain return
	  value for upssend() type
	* drivers/bestfortress.c: drivers/bestfortress.c: fix size_t types
	  for upsdebugx_hex()

2021-04-23  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: fix back setparam()
	  arg type

2020-12-01  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: fix printing of
	  ssize_t variable

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: use size_t where it
	  should be, for data chunk length parsing

2020-12-26  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfcom.c: drivers/bestfcom.c: fix size_t int type for
	  execute() (use-cases pass sizeof() anyway)
	* drivers/belkinunv.c: drivers/belkinunv.c: fix int types for read(),
	  malloc() etc.
	* drivers/belkinunv.c: drivers/belkinunv.c: fix int types for reg
	  (byte)
	* drivers/belkin.c: drivers/belkin.c: fix size_t/useconds_t int type
	  for cnt (already limited to byte range)
	* drivers/bcmxcp.c: drivers/bcmxcp.c: whitespace fix indentation in
	  set_alarm_support_in_alarm_map()
	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix unsigned int type for index
	  arguments in set_alarm_support_in_alarm_map()
	* drivers/serial.c: drivers/serial.c: fix ssize_t int type for
	  function returns vs size_t buflen argument
	* drivers/dstate.c: drivers/dstate.c: fix size_t int type for
	  bufrw_max
	* drivers/main.c: drivers/main.c: fix int types for poll_interval
	* clients/upscmd.c: clients/upscmd.c: fix data range warnings for
	  asserts about implem-dependent overflow chances
	* clients/upsrw.c: clients/upsrw.c: fix data range warnings for
	  asserts about implem-dependent overflow chances
	* clients/upsclient.c: clients/upsclient.c: fix data range warnings
	  for asserts about implem-dependent overflow chances
	* clients/upsmon.c, clients/upsmon.h: clients/upsmon.c: fix int types
	  for power value and totalpv accounting
	* clients/upsmon.c: clients/upsmon.c: fix int types for sleep()
	* clients/upsimage.c: clients/upsimage.c: make explicit casts from
	  floating-points into int types for rendering
	* clients/upscmd.c: clients/upscmd.c: fix int types for timeouts from
	  upsclient.c
	* clients/upsrw.c: clients/upsrw.c: fix int types for timeouts from
	  upsclient.c
	* clients/upsclient.c: clients/upsclient.c: fix numq int types for
	  verify_resp()

2020-12-25  Jim Klimov <jim@jimklimov.com>

	* clients/upsclient.c: clients/upsclient.c: make explicit a case
	  size_t/ssize_t casting
	* clients/upsclient.c, clients/upsclient.h: clients/upsclient.{c,h}:
	  fix "timeout" type in
	  net_read/net_write/upscli_sendline_timeout/upscli_readline_timeout
	  to match upscli_select_read/upscli_select_write
	* clients/upsclient.c: clients/upsclient.c: fix int types for OpenSSL
	  codepaths

2020-12-07  Jim Klimov <jim@jimklimov.com>

	* drivers/metasys.c: drivers/metasys.c: various routines: fix
	  command_length into size_t
	* drivers/bcmxcp_io.h, drivers/bcmxcp_ser.c, drivers/bcmxcp_usb.c:
	  bcmxcp*: various routines: fix command_length into size_t
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: get_answer(): fix
	  bytes_read, end_length and length into size_t
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: get_answer(): fix
	  bytes_read, end_length and length into size_t

2020-12-02  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c: drivers/bcmxcp.c: use size_t for upsdebugx_hex()
	  and upsdebugx_ascii() args for logged data length

2020-12-01  Jim Klimov <jim@jimklimov.com>

	* drivers/masterguard.c: drivers/masterguard.c: fix printing of
	  ssize_t variable

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* clients/upsstats.c: clients/upsstats.c: fix use of use size_t vs
	  int-argumented printf("%.*s", int, str) formatting
	* drivers/al175.c: drivers/al175.c: check pointer math WRT buffer
	  lengths passed to logging
	* common/common.c, include/common.h: common.{c,h}: use size_t for
	  upsdebugx_hex() and upsdebugx_ascii() args for logged data length
	* drivers/tripplitesu.c: drivers/tripplitesu.c: init_comm(): fix data
	  types to size_t for strlen() function
	* drivers/tripplitesu.c: drivers/tripplitesu.c: do_command(): fix up
	  "count" int type to be unsigned
	* drivers/tripplitesu.c: drivers/tripplitesu.c: do_command(): fix up
	  "ret" int type to avoid conversions
	* drivers/masterguard.c: drivers/masterguard.c: avoid value type
	  conversion by changing data types to size_t for strlen() function
	* drivers/masterguard.c: drivers/masterguard.c: avoid value type
	  conversion by casting explicitly the return value of strlen()
	  function

2020-12-27  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.cpp, clients/nutclient.h:
	  clients/nutclient.{h,cpp}: explicitly request copy constructor
	  generation for exception classes

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* clients/upsset.c: drivers/upsset.c: fix up int types to avoid
	  implicit conversions
	* clients/upsimage.c: drivers/upsimage.c: avoid value type conversion
	  by casting explicitly the return value of strlen() function
	* clients/upsimage.c: drivers/upsimage.c: fix up int types to avoid
	  conversions
	* clients/cgilib.c: drivers/cgilib.c: fix up int types to avoid
	  conversions
	* clients/upsstats.c: drivers/upsstats.c: fix up floating-point types
	  to avoid conversions and precision change
	* clients/upsstats.c: clients/upsstats.c: use size_t where it should
	  be, for string length related processing
	* clients/upslog.c: clients/upslog.c: use size_t where it should be,
	  for string length related processing
	* clients/upslog.c: clients/upslog.c: avoid implicit floating-integer
	  conversion

2021-03-30  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: nut_enable_warnings: clang presets
	  should let "-Wdocumentation" slide: NUT does not use it now, and
	  third-party headers are what they are

2020-12-29  Jim Klimov <jim@jimklimov.com>

	* tests/nut-driver-enumerator-test.sh: tests/nut-driver-enumerator-
	  test.sh: allow to pass SHELL_PROGS="busybox_sh" as a single token

2020-12-26  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: move _matrix_linux_gnustd_warn_viable a
	  bit up in _matrix_required_linux listing, to get more probable
	  failures earlier

2021-04-23  Jim Klimov <jim@jimklimov.com>

	* drivers/delta_ups-mib.c: delta-mib.c: rename onbatt_info lookup
	  table in commented-away code sample (and match naming pattern with
	  other tables)
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c: typo in comment
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: comment that Vendor ID
	  0x0483 is from ST Microelectronics

2021-04-23  Jim Klimov <jimklimov@gmail.com>

	* drivers/ever-hid.c: Update ever-hid.c  Make and comment the macro
	  for ST Microelectronics vendor id (to generate udev data, etc.
	  properly)
	* drivers/ever-hid.c: Update ever-hid.c  Lowercase the hex in vendor
	  ID macro, for consistency

2021-04-22  Nick Briggs <nicholas.h.briggs@gmail.com>

	* drivers/hidparser.c: correct 'for' loop initial declarations are
	  only allowed in C99 or C11 mode
	* drivers/hidparser.c: Extract values in HIDParse correctly when
	  compiled in 64-bit (LP64) mode  Reworks the conversion of bytes in
	  little-endian order to host order to operate independently of the
	  sizeof(long) and the byte-order of the host system. The extracted
	  value is stored as uint32_t as the code already performs casts to
	  signed/unsigned of varying sizes as appropriate to the context of
	  use.

2021-04-21  Jim Klimov <jim@jimklimov.com>

	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: sync polling frequencies
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: remove (read-only) mappings for ups.delay*
	  in favor of same points polled for ups.timer*
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: comment away ups.mfr/model/serial setting
	  per PR comments
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: set voltage/current/frequency precision to
	  %.1f same for all entries
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: set battery.charge* precision to %.0f same
	  for all entries
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: import delta_ups_hid2nut[] entries "as is"
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: import Helper lookup tables and mapping
	  functions from master
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: change delta_ups_hid2nut[] content order
	  by names to be same as in master
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: import named delta_ups_usage_lkp[] content
	  from master
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: import delta_ups_format_model() content
	  from master
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: move delta_ups_format_model() to same
	  position as in master
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: indentations in delta_ups_claim()
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: indentations in delta_ups_hid2nut[]
	* drivers/delta_ups-hid.c: drivers/delta_ups-hid.c/.h: sync PR #807
	  code with master branch: indentations in delta_ups_usage_lkp[]
	* drivers/delta_ups-hid.c, drivers/delta_ups-hid.h:
	  drivers/delta_ups-hid.c/.h: sync PR #807 code with master branch:
	  rename delta => delta_ups, sync comments
	* drivers/Makefile.am, drivers/{delta-hid.c => delta_ups-hid.c},
	  drivers/{delta-hid.h => delta_ups-hid.h}, drivers/usbhid-ups.c,
	  scripts/upower/95-upower-hid.rules: Rename delta-hid.c/.h to
	  delta_ups-hid.c/.h and sync vendor label for USB [#807]

2021-04-21  Edgar Fuß <ef@math.uni-bonn.de>

	* drivers/nutdrv_qx.c: Correct format string  size_t is unsigned, so
	  use %zu (not %zd) in upsdebug() format string.
	* drivers/nutdrv_qx.c: Remove vis-dependent debugging code  Remove
	  (level 4) debugging code in the phoenixtex/masterguard USB
	  subdriver that depends on the BSD strvis() family for visual string
	  formatting.

2021-04-20  Jim Klimov <jimklimov@gmail.com>

	* drivers/delta-hid.c: Update delta-hid.c  Sync the vendor-name
	  comment (for udev generation among others) with another Delta HID
	  driver merged to master recently.

2021-04-20  Jim Klimov <jim@jimklimov.com>

	* drivers/delta_ups-hid.c, scripts/upower/95-upower-hid.rules:
	  95-upower-hid.rules: regenerate for idVendor=05dd (Delta UPS)
	* docs/documentation.txt: docs/documentation.txt: add a section on
	  reporting Data dumps for the DDL

2021-04-20  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Updated for PR #994

2021-04-20  Jim Klimov <jim@jimklimov.com>

	* docs/man/nutdrv_qx.txt: docs/man/nutdrv_qx.txt: fix copy-paste typo

2021-04-20  Ygor Amadeo Sartori Regados <ygorre@tutanota.com>

	* docs/man/microsol-apc.txt: Man page compilation error fixes
	* docs/man/Makefile.am, docs/man/microsol-apc.txt: Added man page
	* drivers/microsol-apc.c, drivers/microsol-common.h: Fix: wrong
	  operator and unused function
	* drivers/microsol-apc.c, drivers/microsol-apc.h: Fixed driver name

2021-04-20  Jim Klimov <jimklimov@gmail.com>

	* drivers/microsol-apc.c: Update microsol-apc.c  In upsdrv_info,
	  split contributors one per line for better source readability

2021-04-20  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix back the name for
	  "fabula_hunnox_subdriver" (USB protocol subdriver vs.
	  "hunnox_subdriver" for device data mapping)
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: bump core DRIVER_VERSION
	  to reflect changes from PR #638 for "hunnox" support
	* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx.c: drivers/nutdrv_qx.c:
	  simplify new subdriver/command naming from "fabula-hunnox" to
	  "hunnox"
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: restore indentation with
	  TABs
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fabula_command_hunnox():
	  comment about truncating the buflen to 102 bytes
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fabula_command_hunnox():
	  comment away scoping for (and use of) "hunnox_patch" leaving the
	  markers in comments for refactoring
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: comment that
	  fabula_hunnox_subdriver was reported to support more than Hunnox
	  branded devices
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fabula_command_hunnox():
	  restore originally PRed choice of usb_get_string{,_simple}() based
	  on langid_fix alone
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: separate
	  fabula_command_hunnox() from fabula_command() without using a mixed
	  routine, to ensure no impact on currently supported devices
	* docs/nut.dict: docs/nut.dict: typo fix

2021-04-20  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Some more keywords to the
	  dictionary from PR #638

2021-04-19  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Update dictionary for Hunnox PR
	  #638
	* docs/man/nutdrv_qx.txt: Update nutdrv_qx.txt  Basically mention
	  updates from Hunnox subdriver and protocol addition (PR #638).
	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  Err on the safer side of
	  changing behavior for non-hunnox device support, limit the
	  applicability of langid_fix (per PR #638 review cautionary
	  comments). Maybe the proposed original change did apply to other
	  devices that support the fix-up, but that should be evaluated
	  separately and this new constraint reversed if needed.
	* drivers/nutdrv_qx_hunnox.c: Update nutdrv_qx_hunnox.c  Updated file
	  heading
	* drivers/nutdrv_qx_hunnox.h: Update nutdrv_qx_hunnox.h  Updated file
	  heading

2021-04-10  Jim Klimov <jim@jimklimov.com>

	* docs/images/advanced.png, docs/images/bizarre.png: Vox populi:
	  replace master by primary and slave by secondary in documentation
	  images [#840]

2021-04-09  Jim Klimov <jim@jimklimov.com>

	* docs/images/ci/fosshost.org_Host_Dark_56px.png,
	  docs/images/ci/jenkins-nut-large-256px.png, docs/images/ci/jenkins-
	  nut-large-squared.png, docs/images/ci/jenkins-nut-large.pdn,
	  docs/images/ci/jenkins-nut-large.png, docs/images/ci/jenkins-nut-
	  small-256px.png, docs/images/ci/jenkins-nut-small.pdn,
	  docs/images/ci/jenkins-nut-small.png, docs/images/ci/jenkins-nut-
	  squared.png, docs/images/ci/jenkins-nut-transparent-bg-40px.png,
	  docs/images/ci/jenkins-nut-transparent-bg.png,
	  docs/images/ci/jenkins-nut.css, docs/images/ci/jenkins-nut.png,
	  docs/images/ci/jenkins-nut.txt: Add image and CSS resources used in
	  new Jenkins CI [#869]

2021-04-09  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Missed a couple of new dictionary
	  words

2021-04-09  Alexey Kazancev <ruskazancev@gmail.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: add overflows protection
	  for snr subdriver

2021-04-09  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Added "snr" and "SNR" to
	  spellchecker dictionary

2021-04-09  Alexey Kazancev <ruskazancev@gmail.com>

	* docs/acknowledgements.txt: docs/acknowledgements.txt: add NAG at
	  manufacturer list
	* data/driver.list.in: data/driver.list.in: add various SNR-UPS-LID-
	  XXXX UPSes supported by nutdrv_qx Protocol: 'megatec' USB
	  subdriver: 'snr'
	* docs/man/nutdrv_qx.txt: docs/man/nutdrv_qx.txt: update man page for
	  new 'snr' USB subdriver
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: add new 'snr' USB
	  subdriver to support SNR-UPS-LID units

2021-04-08  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: Update Makefile.am  Beside exactly "troff"
	  some systems have other "*roff" family tools and formats

2021-04-07  Jim Klimov <jimklimov@gmail.com>

	* configure.ac: configure.ac: satisfy both builders that have pkg-
	  config installed and those who do not
	* configure.ac: configure.ac: avoid syntax errors if pkg-config is
	  not installed

2021-04-06  Aaron Thompson <dev@aaront.org>

	* drivers/powercom.c: drivers/powercom.c: Fix a small error in output
	  voltage for KIN models.

2021-03-31  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: protect failsafe logic from
	  compiler warnings with pragmas

2021-03-30  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: alarm_set(): stretch slightly
	  absurd ways to avoid overflow and fix signed/unsigned mismatch
	  (follow up for #986)
	* configure.ac: configure.ac: add --enable-cppunit to allow disabling
	  it even if deemed supported by compiler  Practice shows that
	  libcppunit.so may be linked against a different compiler version
	  and/or libc than the one used for current NUT build. While formal
	  support checked by the script works, practical build fails.
	* NEWS: NEWS: Reflect terminology change for upsmon

2021-03-29  Jim Klimov <jim@jimklimov.com>

	* clients/upsmon.c: clients/upsmon.c: rename static functions
	  slavesync() => sync_secondaries() and checkmaster() =>
	  apply_for_primary() and document them better
	* README, clients/nutclient.cpp, clients/nutclient.h,
	  clients/upsmon.c, clients/upsmon.h, conf/ups.conf.sample,
	  conf/upsd.users.sample, conf/upsmon.conf.sample.in, docs/config-
	  notes.txt, docs/design.txt, docs/features.txt, docs/history.txt,
	  docs/man/clone.txt, docs/man/genericups.txt,
	  docs/man/libnutclient_misc.txt, docs/man/nut.conf.txt,
	  docs/man/nutdrv_atcl_usb.txt, docs/man/richcomm_usb.txt,
	  docs/man/upsd.txt, docs/man/upsd.users.txt,
	  docs/man/upsmon.conf.txt, docs/man/upsmon.txt, docs/net-
	  protocol.txt, docs/new-drivers.txt, docs/scheduling.txt,
	  docs/security.txt, drivers/optiups.c, scripts/augeas/README,
	  scripts/augeas/nutupsdusers.aug.in,
	  scripts/augeas/tests/test_nut.aug, scripts/perl/Nut.pm,
	  scripts/python/module/PyNUT.py, server/netcmds.h, server/netuser.c,
	  server/netuser.h, server/user.c: Vox populi: replace manager/master
	  by primary and subordinate/slave by secondary
	* scripts/python/app/README: scripts/python/app/README: typo fix
	* docs/man/libnutclient_misc.txt: docs/man/libnutclient_misc.txt: fix
	  English wording a bit
	* docs/nut.dict: docs/nut.dict: update word-count after large docs
	  update

2021-03-27  orbea <orbea@riseup.net>

	* drivers/Makefile.am: drivers: Fix undefined references with
	  slibtool.

2021-03-26  Arnaud Quette <ArnaudQuette@eaton.com>

	* scripts/upower/95-upower-hid.rules: Revert "95-upower-hid.rules
	  script updated"  This reverts commit
	  262c23c6b8f1368165c75a0df317b1ba9ff5c511.

2021-03-26  Jim Klimov <jimklimov@gmail.com>

	* tools/nut-snmpinfo.py: Update nut-snmpinfo.py  Also handle the `//`
	  comments same way as `/*...`

2021-03-25  Arnaud Quette <ArnaudQuette@eaton.com>

	* tools/nut-snmpinfo.py: nut-scanner: improve SNMP extractor script
	  Also remove EOL comments

2021-03-24  Jim Klimov <jim@jimklimov.com>

	* drivers/bestups.c, drivers/blazer.c, drivers/blazer.h,
	  drivers/blazer_ser.c, drivers/blazer_usb.c: bestups, blazer* driver
	  sources: add obsoletion notices on top, in favor of nutdrv_qx
	  drivers
	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: allow to trace USB
	  driver conflicts (e.g. obsoleted and new handlers of same
	  vendor/product IDs)

2021-03-23  Ygor Amadeo Sartori Regados <ygorre@tutanota.com>

	* drivers/microsol-apc.c, drivers/microsol-apc.h, drivers/microsol-
	  common.c, drivers/microsol-common.h: Bug fix: battery charge
	  calculation

2021-03-23  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: make GitIgnores failure fatal (and report
	  what the difference is, for tracked and regenerated files)
	* tests/.gitignore: GitIgnore tests/nutlogtest binary
	* ci_build.sh: ci_build.sh: make GitIgnores failure fatal

2021-03-23  Degott, Francois Regis <FrancoisRegisDegott@eaton.com>

	* scripts/upower/95-upower-hid.rules: 95-upower-hid.rules script
	  updated

2021-03-23  Ygor Amadeo Sartori Regados <ygorre@tutanota.com>

	* drivers/microsol-common.c: Bug fix: Handle packet boundary
	  desynchronization

2021-03-23  Degott, Francois Regis <FrancoisRegisDegott@eaton.com>

	* scripts/upower/95-upower-hid.rules: 95-upower-hid.rules script
	  updated
	* drivers/Makefile.am, drivers/eaton-ats16-nm2-mib.c, .../{eaton-
	  ats16-mib.h => eaton-ats16-nm2-mib.h}, .../{eaton-ats16-mib.c =>
	  eaton-ats16-nmc-mib.c}, drivers/eaton-ats16-nmc-mib.h,
	  drivers/snmp-ups.c: improve support of EATON ATS16 NMC/NM2

2021-03-21  Ygor Amadeo Sartori Regados <ygorre@tutanota.com>

	* drivers/microsol-apc.c: Fixed missing calculation part for BZ1500
	  Bug identified with data provided on issue #697
	* drivers/microsol-common.c: CI fix: C89 compilation fixed
	* drivers/Makefile.am: Missing header fixed
	* drivers/Makefile.am: CI error fix: missing header file

2021-03-19  Ygor Amadeo Sartori Regados <ygorre@tutanota.com>

	* drivers/microsol-common.c, drivers/microsol-common.h: Fixed LGTM
	  alert about localtime_r  Also passed microsol-common.c through
	  indent
	* drivers/Makefile.am, drivers/microsol-apc.c, drivers/microsol-
	  apc.h, drivers/microsol-common.c, drivers/microsol-common.h: New
	  driver: microsol-apc  Derived from solis driver, for newer APC
	  Back-UPS BR hardware. Support added for APC Back-UPS BZ1500,
	  BZ2200BI and BZ2200I. Tested on BZ2200BI. Created common file that
	  may be used on solis as well.

2021-03-14  JungEon Kim <me@jungeon.kim>

	* data/driver.list.in: Add Delta UPS Amplon R Series in drivers.list

2021-03-14  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: alarm_set(): at least log the
	  truncated buf if it does not fit into dstate field

2021-03-13  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt: docs/developers.txt: replace "master" where it
	  is easy, and update some recommendations
	* clients/upsmon.c: clients/upsmon.c: comment that also several NUT
	  drivers can directly set FSD flag propagated from the smarter power
	  devices
	* docs/security.txt: docs/security.txt: extend the Firewall section
	  for more considerations
	* docs/man/upsmon.txt: docs/man/upsmon.txt: suggestions for
	  experiments about timing the shutdown vs. dummy SHUTDOWNCMD to
	  check the skeleton logic
	* docs/man/upsmon.conf.txt: docs/man/upsmon.conf.txt: extend the
	  example for "bigserver" with manager vs subordinate upsmon's
	* docs/history.txt: docs/history.txt: reflect that slave/master terms
	  were deprecated
	* README: README: Make note of UPSes which allow multiple managerial
	  accesses
	* clients/nutclient.cpp, clients/nutclient.h, clients/upsmon.c,
	  docs/net-protocol.txt, scripts/perl/Nut.pm,
	  scripts/python/module/PyNUT.py, server/netcmds.h, server/netuser.c,
	  server/netuser.h, server/user.c: Identify points in source code
	  (and few related docs) for deprecating master|slave terminology
	* README, clients/upsmon.c, clients/upsmon.h, conf/ups.conf.sample,
	  conf/upsd.users.sample, conf/upsmon.conf.sample.in, docs/config-
	  notes.txt, docs/design.txt, docs/features.txt, docs/man/clone.txt,
	  docs/man/genericups.txt, docs/man/libnutclient_misc.txt,
	  docs/man/nut.conf.txt, docs/man/nutdrv_atcl_usb.txt,
	  docs/man/richcomm_usb.txt, docs/man/upsd.txt,
	  docs/man/upsd.users.txt, docs/man/upsmon.conf.txt,
	  docs/man/upsmon.txt, docs/net-protocol.txt, docs/new-drivers.txt,
	  docs/nut.dict, docs/scheduling.txt, docs/security.txt,
	  drivers/optiups.c, scripts/augeas/README,
	  scripts/augeas/nutupsdusers.aug.in,
	  scripts/augeas/tests/test_nut.aug, scripts/perl/Nut.pm,
	  server/user.c: Update documentation, emitted messages and easy-to-
	  fix code to rename master=>manager and slave=>subordinate
	* docs/man/upsmon.txt: docs/man/upsmon.txt: suggestions for
	  experiments about timing the shutdown vs. dummy SHUTDOWNCMD to
	  check the skeleton logic
	* docs/security.txt: docs/security.txt: extend the Firewall section
	  for more considerations
	* docs/security.txt: docs/security.txt: reword one shade of "master"
	* docs/solaris-usb.txt: docs/solaris-usb.txt: reword one shade of
	  "master"
	* drivers/asem.c: drivers/asem.c: clarify the use of "S" word
	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  clarify the use of "S" word
	* drivers/nutdrv_qx.c, drivers/usbhid-ups.c: drivers/nutdrv_qx.c &
	  usbhid-ups.c: reword "Reference list of..."
	* clients/upsmon.c, docs/net-protocol.txt: docs/net-protocol.txt +
	  upsmon.c: comment that also several NUT drivers can directly set
	  FSD flag propagated from the smarter power devices
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: note that
	  systems should only shutdown when less than MINSUPPLIES PSUs are
	  non-critical
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: note about
	  UPSes with manageable thresholds for critical state
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: note that
	  rack shutdowns can compete for I/O and take longer
	* conf/upsmon.conf.sample.in: conf/upsmon.conf.sample.in: generalize
	  the example about multi-PSU servers
	* docs/config-notes.txt: docs/config-notes.txt: update the example
	  about multi-PSU servers

2021-03-13  JungEon Kim <me@jungeon.kim>

	* drivers/Makefile.am, drivers/delta_ups-hid.c, drivers/delta_ups-
	  hid.h, drivers/usbhid-ups.c: delta_ups-hid: Add support for Delta
	  UPS Amplon R Series

2021-03-13  Jim Klimov <jim@jimklimov.com>

	* docs/config-notes.txt: docs/config-notes.txt: note about upsmon
	  with 0 PSUs for just-monitoring
	* data/html/header.html.in, docs/cables/apc-rs500-serial.txt,
	  docs/cables/ge-imv-victron.txt, docs/cables/powerware.txt,
	  docs/cables/repotec.txt, docs/cables/sms.txt, docs/man/apcsmart-
	  old.txt, docs/man/apcsmart.txt, docs/man/asem.txt,
	  docs/man/bcmxcp.txt, docs/man/bcmxcp_usb.txt, docs/man/belkin.txt,
	  docs/man/belkinunv.txt, docs/man/bestfcom.txt,
	  docs/man/bestuferrups.txt, docs/man/bestups.txt,
	  docs/man/everups.txt, docs/man/genericups.txt, docs/man/index.txt,
	  docs/man/libnutclient_misc.txt, docs/man/libnutclient_tcp.txt,
	  docs/man/libupsclient-config.txt, docs/man/liebert-esp2.txt,
	  docs/man/metasys.txt, docs/man/mge-shut.txt, docs/man/mge-
	  utalk.txt, docs/man/nut-driver-enumerator.txt, docs/man/nut-
	  ipmipsu.txt, docs/man/nut-scanner.txt,
	  docs/man/nutdrv_atcl_usb.txt,
	  docs/man/nutscan_add_device_to_device.txt,
	  docs/man/nutscan_add_option_to_device.txt,
	  docs/man/nutscan_cidr_to_ip.txt,
	  docs/man/nutscan_display_parsable.txt,
	  docs/man/nutscan_display_ups_conf.txt,
	  docs/man/nutscan_free_device.txt,
	  docs/man/nutscan_get_serial_ports_list.txt,
	  docs/man/nutscan_init.txt, docs/man/nutscan_new_device.txt,
	  docs/man/nutscan_scan_avahi.txt,
	  docs/man/nutscan_scan_eaton_serial.txt,
	  docs/man/nutscan_scan_ipmi.txt, docs/man/nutscan_scan_nut.txt,
	  docs/man/nutscan_scan_snmp.txt, docs/man/nutscan_scan_usb.txt,
	  docs/man/nutscan_scan_xml_http.txt, docs/man/oneac.txt,
	  docs/man/optiups.txt, docs/man/phoenixcontact_modbus.txt,
	  docs/man/powercom.txt, docs/man/powerman-pdu.txt,
	  docs/man/rhino.txt, docs/man/richcomm_usb.txt,
	  docs/man/riello_ser.txt, docs/man/riello_usb.txt,
	  docs/man/skel.txt, docs/man/solis.txt, docs/man/tripplite.txt,
	  docs/man/ups.conf.txt, docs/man/upscli_add_host_cert.txt,
	  docs/man/upscli_connect.txt, docs/man/upscli_disconnect.txt,
	  docs/man/upscli_get.txt, docs/man/upscli_init.txt,
	  docs/man/upscli_splitaddr.txt, docs/man/upscli_splitname.txt,
	  docs/man/upscli_upserror.txt, docs/man/upsclient.txt,
	  docs/man/upscmd.txt, docs/man/upsd.conf.txt, docs/man/upsd.txt,
	  docs/man/upsd.users.txt, docs/man/upsdrvctl.txt,
	  docs/man/upsdrvsvcctl.txt, docs/man/upslog.txt,
	  docs/man/upsmon.conf.txt, docs/man/upsmon.txt, docs/man/upsrw.txt,
	  docs/man/upssched.txt, docs/man/upsset.cgi.txt,
	  docs/man/upsset.conf.txt, docs/man/upsstats.html.txt,
	  docs/man/usbhid-ups.txt, docs/man/victronups.txt: docs: fix some
	  trailing whitespaces

2021-03-12  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: limit alarm_buf string to fit
	  into a dstate info status, and log errors and overflows from
	  alarm_set() [issue #960]

2021-03-02  Edgar Fuß <ef@math.uni-bonn.de>

	* docs/man/blazer-common.txt, docs/man/nutdrv_qx.txt,
	  docs/man/tripplite_usb.txt, docs/man/usbhid-ups.txt: Add a remark
	  that USB device numbers may be unstable  In the documentation of
	  the USB device number matching, add a remark that device numbers
	  need not to be stable across re-boots or when re-plugging the
	  device.
	* drivers/usb-common.c: USB device matching: add debug messages on
	  non-match  When failing to match the Device part, note this via
	  upsdebugx() just like when not matching any other part (VendorId,
	  ProductId, Bus, etc.).

2021-03-02  Jim Klimov <jimklimov@gmail.com>

	* docs/man/nutdrv_qx.txt: Update nutdrv_qx.txt  Fixed typo in a new
	  masterguard paragraph

2021-02-12  Edgar Fuß <ef@math.uni-bonn.de>

	* tools/nut-usbinfo.pl: Fix VendorID/ProductID matching  In a line
	  like { USB_DEVICE(0x06da, 0x0002),   "Phoenixtec Power","USB Cable
	  (V2.00)", &phoenixtec_subdriver },/* Masterguard A Series */ don't
	  match ProductID up to the closing parenthesis in the product name
	  string.

2021-02-11  Edgar Fuß <ef@math.uni-bonn.de>

	* docs/man/masterguard.txt, docs/man/nutdrv_qx.txt, docs/nutdrv_qx-
	  subdrivers.txt, drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_masterguard.c, drivers/nutdrv_qx_masterguard.h:
	  Add Masterguard A/E driver based on Q* framework  Add a new driver
	  for Masterguard A and E series based on the Q* framework
	  (nutdrv_qx).  Based on vendor documentation of both the command set
	  and USB protocol I was both asked not to disclose.  Supports "new"
	  A700/1000/2000/3000(-19) and E40/60/100(-19) (totally untested due
	  to lack of hardware).  Still sort of work in progress due to some
	  open questions on NUT integration.
	* docs/man/blazer-common.txt, docs/man/nutdrv_qx.txt,
	  docs/man/tripplite_usb.txt, docs/man/usbhid-ups.txt,
	  drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
	  drivers/riello_usb.c, drivers/tripplite_usb.c, drivers/usb-
	  common.c, drivers/usb-common.h, drivers/usbhid-ups.c: Add USB
	  device number matching  Extend the USB matching by a device number
	  (in addition to the existing bus number) by adding a Device field
	  to USBDevice_[st] and ammending the RegExp by a seventh field.
	  Maybe some #defines for the magical constants would be appropriate.
	  Add DEBUG_EXACT_MATCH_DEVICE analogous to DEBUG_EXACT_MATCH_BUS,
	  whatever its intended usage is.  Document the device field where
	  the bus field was documented (which is not the case everywhere it's
	  actually used).

2021-01-31  TJ McConnell <tj@vergesense.com>

	* drivers/tripplite-hid.c: Move 0x3024 alphabetically. Add comment
	  about new version

2021-01-26  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: fix regression on Eaton
	  ePDU  Fix a regression that caused a mis-determination of the SNMP
	  base OID index (0 or 1, should be 1). This in turn caused a mis-
	  iteration over the outlets, from 0 to N-1 instead of 1 to N, which
	  resulted in the missing Nth outlet (last outlet of the PDU). This
	  also caused some data refresh issues

2021-01-23  Yifeng Li <tomli@tomli.me>

	* drivers/main.c: main.c: write upsdrv_initinfo/updateinfo() logs to
	  syslog  When a NUT driver is started (via upsdrvctl start), it runs
	  the following sequence:  1. Run as a foreground process. 2. Do some
	  basic initialization, log to stderr. 3. If not debugging: - fork()
	  - Run as a daemon, stderr off, syslog on.  The problem, however, is
	  that upsdrv_initinfo() and updateinfo() are first called before
	  forking, as a result, the log messages is only sent to stderr, not
	  syslog. On a traditional init + syslog server setup, those startup
	  messages are lost. However, those lost messages can be urgent - for
	  example, it can be a warning about a failed UPS inverter. If the
	  server is freshly started, the admin may miss them until much
	  later, or keep staring at the mysterious alarm word without finding
	  anything relevant in syslog. Similarly, other types of warnings,
	  such as a rounded ondelay value, should also be visible in syslog.
	  This patch checks the debugging flags and turn on syslog earlier
	  when it's in non-debug, non-fork mode, allowing the logs during
	  upsdrv_initinfo() and upsdrv_updateinfo() to be recorded in syslog.
	  Mailing list discussion: https://alioth-
	  lists.debian.net/pipermail/nut-upsdev/2021-January/007508.html

2021-01-23  TJ McConnell <tj@vergesense.com>

	* drivers/tripplite-hid.c, scripts/upower/95-upower-hid.rules: Add
	  AVR750U (0x3024). Use smart1500lcdt_scale for
	  voltage/current/frequence

2021-01-20  Jim Klimov <jim@jimklimov.com>

	* drivers/delta_ups-mib.c: delta-mib.c: rename onbatt_info lookup
	  table in commented-away code sample
	* drivers/huawei-mib.c: huawei-mib.c: rename onbatt_info lookup table
	  in commented-away code sample
	* drivers/xppc-mib.c: xppc-mib.c: rename onbatt_info lookup table in
	  commented-away code sample

2016-05-25  Jim Klimov <jim@jimklimov.com>

	* drivers/raritan-px2-mib.c: raritan-px2-mib - renamed lookups to
	  have "raritanpx2_*" prefix
	* drivers/raritan-pdu-mib.c: raritan-pdu-mib - renamed lookups to
	  have "raritan_pdu_*" prefix
	* drivers/powerware-mib.c: powerware-mib - renamed "ietf_*" and
	  "eaton_*" lookups to have "pw_*" prefix

2016-05-23  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-mib.c: mge-mib.c : rename rogue ietf_* lookups to mge_*

2016-05-25  Jim Klimov <jim@jimklimov.com>

	* drivers/baytech-mib.c: baytech-mib - renamed "outlet_status_info"
	  lookup to "baytech_outlet_status_info"
	* drivers/apc-ats-mib.c: apc-ats-mib.c- renamed "ats_*" lookups to
	  "apc_ats_*"

2021-01-08  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/snmp-ups.c: snmp-ups: fix instant commands using numeric
	  parameters  Instant commands using numeric parameters, like
	  on/off/cycle commands, were failing due to a bad value submitted
	  type (time instead of integer)   Cherry-picked from
	  https://github.com/42ity/nut/pull/120

2020-12-29  Steve Magoun <smagoun@gmail.com>

	* drivers/macosx-ups.c: drivers/macosx-ups.c: Add ups.mfr and
	  ups.model legacy vars, fixes #949

2020-12-29  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: allow CI workers to say if they have
	  functional libgd (for the current compiler/ABI version) so whether
	  it should not be required

2020-12-28  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: treat helper dirs (tmp/ .inst/
	  CCACHE_DIR/) correctly even if named FS objects are symlinks to
	  dirs
	* docs/Makefile.am, docs/man/Makefile.am: docs/{man/,}Makefile.am:
	  parameterize EGREP and call "file" sanity checks case-insensitive
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: detect Apple
	  LLVM as CLANG

2020-12-27  Jim Klimov <jim@jimklimov.com>

	* configure.ac, docs/developers.txt: configure.ac
	  docs/developers.txt: add a "medium" warning pre-set difficulty
	  level
	* configure.ac: configure.ac: document the choice rationale of no-
	  warning macros
	* docs/developers.txt, docs/nut.dict: docs/developers.txt: document
	  the new --enable-warnings options
	* configure.ac: configure.ac: define a clang-minimal warning preset
	  that our codebase already survives
	* .travis.yml, configure.ac: Move comment about clang no-warning
	  selection from .travis.yml to configure.ac
	* .travis.yml: .travis.yml: make use of BUILD_WARNFATAL=yes
	  BUILD_WARNOPT=hard to simplify the test setup specifications

2020-12-26  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: hush clang warnings about nullptr in
	  C++ code (c++98 not compatible))
	* configure.ac: configure.ac: provide a hidden "gcc-legacy" warnings
	  option to cover previous behavior
	* ci_build.sh: ci_build.sh: allow passing --enable-warnings=... and
	  --enable-Werror=... args via BUILD_WARNOPT and BUILD_WARNFATAL
	  envvars
	* configure.ac: configure.ac: implement --enable-warnings=... and
	  --enable-Werror(=yes/no) to specify the presets we require to pass
	* m4/nut_arg_with.m4: m4/nut_arg_with.m4: add NUT_ARG_ENABLE and
	  document the difference vs NUT_ARG_WITH
	* ci_build.sh: ci_build.sh: support passing BUILD_SSL_ONCE=true to
	  only try whichever SSL implem is found, not both even if installed
	* autogen.sh: autogen.sh: shell-check that generated configure script
	  is syntactically valid
	* m4/nut_compiler_family.m4: m4/nut_compiler_family.m4: fix tracking
	  nut_cv_CLANGCC and determining CLANGCC=yes
	* drivers/apcsmart.c, drivers/apcsmart.h: drivers/apcsmart.{c,h}:
	  drop custom debx()/logx()/fatx()/fate() macros in favor of NUT-
	  standard ones

2020-12-02  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix a few whitespaces
	  (indentation)

2020-12-07  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb.c: drivers/libusb.c: fix whitespace

2020-12-25  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common/common.c: fix initialization of a struct
	  timeval (initialize all fields)
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c: fix
	  initialization of a info_lkp_t (initialize all fields)
	* drivers/al175.c: drivers/al175.c: assert incoming numbers, error-
	  check the sprintf() result, and comment why
	* drivers/blazer_usb.c, drivers/nutdrv_qx.c: nutdrv_qx blazer_usb:
	  report acceptable subdriver names in help()

2020-12-25  Jim Klimov <jimklimov@gmail.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c:
	  match_function_subdriver(): upsdebugx() device matching faults to
	  help troubleshoot driver setups

2020-12-24  Jim Klimov <jimklimov@gmail.com>

	* drivers/usb-common.c: usb-common.c: upsdebugx() device matching
	  faults to help troubleshoot driver setups

2020-12-25  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: add comment for per-
	  warning pragma naming
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: fix wrong long macro
	  name typo, for the pragmas gating
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.h: #include <limits.h>
	  (lost in cherrypick web)
	* docs/nut.dict: docs/nut.dict: add Evgeny
	* docs/nut.dict: docs/nut.dict: add maintainership
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: fix nesting of macros
	  for pragmas
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: use HAVE_PRAGMAS_FOR_GC
	  C_DIAGNOSTIC_IGNORED_TAUTOLOGICAL_CONSTANT_OUT_OF_RANGE_COMPARE
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce HAVE_PRAGMAS_FOR_
	  GCC_DIAGNOSTIC_IGNORED_TAUTOLOGICAL_CONSTANT_OUT_OF_RANGE_COMPARE
	  (equivalent of HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TYPE_LIMITS on
	  some compilers)
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: comment in/out function
	  contexts for the pragma
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: do macro magic for
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_TYPE_LIMITS_BESIDEFUNC working
	  with older compilers
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: separate the support for
	  #pragma GCC diagnostic... inside vs outside function bodies
	  (gcc-4.4 and older are upset about "inside" case)
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: cast type for printing
	  speed_t on different OSes

2020-12-07  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp_ser.c, drivers/bcmxcp_ser.h:
	  drivers/bcmxcp_ser.{c,h}: get_answer(): fix baud rate processing
	  into speed_t and size_t

2020-12-23  Jim Klimov <jim@jimklimov.com>

	* docs/user-manual.txt: docs/user-manual.txt: small typo fix
	* docs/nut.dict: nut.dict: update with project names that nut-website
	  spellchecking prefers to know
	* docs/nut.dict: nut.dict: update with project names that nut-website
	  spellchecking prefers to know
	* docs/nut.dict: nut.dict: update with project names that nut-website
	  spellchecking prefers to know

2020-12-21  Jim Klimov <jim@jimklimov.com>

	* docs/acknowledgements.txt: docs/acknowledgements.txt: update
	  persons currently involved, new maintainer  https://alioth-
	  lists.debian.net/pipermail/nut-upsdev/2020-November/007494.html

2020-12-15  Bi11 <Bi11gates9999@gmail.com>

	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: Fix incorrect
	  fatal message for privProtocol
	* tools/nut-scanner/scan_snmp.c: Fix incorrect usmAESPrivProtocol
	  import in nut-scanner  In libnetsnmp, usmAES128PrivProtocol is a
	  pointer, while usmAESPrivProtocol is an array. This change is the
	  same as in c7cf507454bcf6f40b24b58e61c130c7772c5bf2.

2020-12-15  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: Restore legacy Eaton ePDU
	  switchability info  Use a hack to also have switchability for both
	  the unit and its outlets on legacy Eaton G2 ePDU   Partially
	  cherry-picked from 42ity fork, and bumped to their faster moving
	  MIB mapping revision number. See
	  https://github.com/42ity/nut/pull/118  As for the behavior of the
	  fix:  * on G2, the first outlet.switchable doesn't exist, so try
	  the 2nd, which is the ugly hack: try on the first outlet to see if
	  switchable  * on G3, the first is good, so flag unique does the
	  rest  Tested on MA G2 and G3.

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* drivers/dummy-ups.c: drivers/dummy-ups.c: use size_t where it
	  should be, for numargs-related parsing
	* clients/upsclient.c: clients/upsclient.c: use size_t where it
	  should be, for numargs parsing
	* server/netcmds.h, server/netget.c, server/netget.h,
	  server/netinstcmd.c, server/netinstcmd.h, server/netlist.c,
	  server/netlist.h, server/netmisc.c, server/netmisc.h,
	  server/netset.c, server/netset.h, server/netssl.c, server/netssl.h,
	  server/netuser.c, server/netuser.h, server/upsd.c, server/user.c:
	  server/*: numerous upsd commands: use size_t where it should be,
	  for numargs parsing
	* server/sockdebug.c: server/sockdebug.c: use (and print) size_t
	  where it should be, for numargs parsing
	* drivers/dstate.c: drivers/dstate.c: use size_t where it should be,
	  for numargs parsing
	* clients/upssched.c: clients/upssched.c: use (and print) size_t
	  where it should be, for numargs parsing
	* clients/upsmon.c: clients/upsmon.c: use size_t where it should be,
	  for numargs parsing
	* clients/upsset.c: clients/upsset.c: use size_t where it should be,
	  for numargs parsing
	* server/conf.c: server/conf.c: use size_t where it should be, for
	  numargs parsing
	* drivers/snmp-ups.c: drivers/snmp-ups.c: whitespace fix
	* drivers/snmp-ups.c: drivers/snmp-ups.c: use size_t where it should
	  be, for numargs parsing
	* common/state.c, include/state.h, server/sstate.c: common and server
	  state.c: use size_t where it should be, for numargs and numflags
	  parsing
	* drivers/clone-outlet.c: drivers/clone-outlet.c: use size_t where it
	  should be, for numargs parsing
	* drivers/clone.c: drivers/clone.c: use size_t where it should be,
	  for numargs parsing
	* server/netssl.c: server/netssl.c: avoid implicit size_t (arch-
	  dependent) vs. PRInt32 (Mozilla NSS) integer conversion
	* clients/upsclient.c: clients/upsclient.c: avoid implicit size_t
	  (arch-dependent) vs. PRInt32 (Mozilla NSS) integer conversion

2020-12-02  Jim Klimov <jimklimov@gmail.com>

	* drivers/solis.c: Update solis.c  Shuffle the comparison in the if-
	  clause to certainly bail out if we did not read from the port.

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: fix up int types to
	  avoid implicit conversions, and pre-initialize to avoid
	  uninitialized use
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: initialize
	  variable to avoid potential uninitialized use
	* drivers/blazer.c: drivers/blazer.c: initialize variable to avoid
	  potential uninitialized use and convey an error if that happens
	* drivers/powerpanel.c: drivers/powerpanel.c: initialize variable to
	  avoid potential uninitialized use and convey an error if that
	  happens
	* drivers/solis.c: drivers/solis.c: initialize variable to avoid
	  potential uninitialized use and convey an error if that happens
	* drivers/rhino.c: drivers/rhino.c: initialize variable to avoid
	  potential uninitialized use and convey an error if that happens
	* drivers/bestfortress.c: drivers/bestfortress.c: initialize
	  variables to avoid potential uninitialized use and null-pointer
	  dereference if data processing fails

2020-12-02  Jim Klimov <jimklimov@gmail.com>

	* include/nut_float.h: Update nut_float.h  Consider equality to
	  epsilon to be also treated as zero
	* include/nut_float.h: Update nut_float.h  Fix copyright line

2020-11-30  Jim Klimov <jim@jimklimov.com>

	* drivers/cps-hid.c: drivers/cps-hid.c: employ nut_float.h for safer
	  floating point comparisons
	* drivers/snmp-ups.c: drivers/snmp-ups.c: employ nut_float.h for
	  safer floating point comparisons
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c:
	  employ nut_float.h for safer floating point comparisons
	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: employ
	  nut_float.h for safer floating point comparisons
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: employ nut_float.h for
	  safer floating point comparisons
	* drivers/blazer.c: drivers/blazer.c: employ nut_float.h for safer
	  floating point comparisons
	* drivers/upscode2.c: drivers/upscode2.c: employ nut_float.h for
	  safer floating point comparisons
	* drivers/solis.c: drivers/solis.c: employ nut_float.h for safer
	  floating point comparisons
	* drivers/rhino.c: drivers/rhino.c: employ nut_float.h for safer
	  floating point comparisons
	* drivers/metasys.c: drivers/metasys.c: employ nut_float.h for safer
	  floating point comparisons
	* drivers/mge-hid.c: drivers/mge-hid.c: employ nut_float.h for safer
	  floating point comparisons
	* configure.ac, include/Makefile.am, include/nut_float.h: Introduce
	  nut_float.h and check more carefully for presence of math.h and/or
	  float.h in the build system
	* drivers/tripplitesu.c: drivers/tripplitesu.c: avoid "bad function
	  cast" by casting explicitly the return value of the function
	* drivers/tripplite.c: drivers/tripplite.c: avoid "bad function cast"
	  by casting explicitly the return value of the function
	* drivers/mge-xml.c: drivers/mge-xml.c: avoid "bad function cast" by
	  casting explicitly the return value of the function
	* drivers/bestfortress.c: drivers/bestfortress.c: avoid "bad function
	  cast" by casting explicitly the return value of the function
	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix snprintf() target
	  buffer size from bogus sizeof() determination (#926)

2020-11-29  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: fix const
	  qualifier usage
	* drivers/snmp-ups.c: drivers/snmp-ups.c: fix const qualifier usage
	* drivers/snmp-ups.h: drivers/snmp-ups.h: remove const qualifiers
	  from strings in snmp_info_t, we have code that writes into them
	* drivers/dstate.c: drivers/dstate.c: dstate_tree_dump(): fix const
	  qualifier usage
	* drivers/bestfcom.c: drivers/bestfcom.c: avoid "bad function cast"
	  by casting explicitly the return value of the function
	* drivers/libshut.c: drivers/libshut.c: avoid alignment issues with
	  buffer used actually for different variable types
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_CAST_ALIGN to quiesce warnings
	  about a value we anyway receive a pointer to
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_CAST_ALIGN

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* drivers/solis.c: drivers/solis.c: avoid variable-length arrays,
	  their support became optional after C99
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: avoid variable-length
	  arrays, their support became optional after C99
	* drivers/apcsmart.c: drivers/apcsmart.c: avoid variable-length
	  arrays, their support became optional after C99
	* drivers/rhino.c: drivers/rhino.c: upsdrv_shutdown(): use sendshut()
	* drivers/rhino.c: drivers/rhino.c: sendshut(): handle negative
	  returns from send_command()
	* drivers/rhino.c: drivers/rhino.c: fix mismatched signedness in
	  comparison
	* drivers/rhino.c: drivers/rhino.c: avoid variable-length arrays,
	  their support became optional after C99

2020-11-29  Jim Klimov <jim@jimklimov.com>

	* server/sstate.c: server/sstate.c: sstate_dead(): do not shadow
	  global varname "maxage" with same-named func argument
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_ups_get(): do not shadow
	  function-scope varname "value" with temporary-scope namesake
	* drivers/snmp-ups.c: drivers/snmp-ups.c: snmp_ups_walk(): do not
	  shadow global varnames "(input|output|bypass)_phases" with same-
	  named func local variables
	* drivers/upscode2.c: drivers/upscode2.c: check_uppm(): do not shadow
	  function-scope varname "val" with temporary-scope namesake
	* drivers/libhid.c: drivers/libhid.c: new_report_buffer(): do not
	  shadow global varname "pDesc" with same-named func argument
	* drivers/libshut.c: drivers/libshut.c: do not shadow global varnames
	  "upsfd" and "device_path" with same-named func arguments in
	  numerous routines
	* drivers/dummy-ups.c: drivers/dummy-ups.c: parse_data_file(): do not
	  shadow global varname "upsfd" with same-named func argument (unused
	  for good measure)
	* clients/upsset.c: clients/upsset.c: print_rw(): do not shadow
	  global varname "upsname" with same-named func argument
	* drivers/riello_usb.c: drivers/riello_usb.c: fix array initializers
	  for sentinel entries
	* drivers/blazer_usb.c: drivers/blazer_usb.c: fix array initializers
	  for sentinel entries
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c: fix
	  array initializers for sentinel entries
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: fix array initializers
	  for sentinel entries
	* drivers/apcsmart_tabs.c: drivers/apcsmart_tabs.c: fix array
	  initializers for sentinel entries
	* drivers/apcsmart_tabs.c: drivers/apcsmart_tabs.c: fix numeric 0
	  into pointer NULL
	* drivers/apcsmart.c: drivers/apcsmart.c: fix array initializers for
	  sentinel entries
	* drivers/blazer_ser.c: drivers/blazer_ser.c: fix array initializers
	  for sentinel entries
	* drivers/blazer.c: drivers/blazer.c: fix array initializers for
	  sentinel entries
	* drivers/powerp-txt.c: drivers/powerp-txt.c: fix array initializers
	  for sentinel entries
	* drivers/powerp-bin.c: drivers/powerp-bin.c: fix array initializers
	  for sentinel entries
	* drivers/mge-hid.c: drivers/mge-hid.c: fix array initializers for
	  sentinel entries
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: upsdrv_initinfo():
	  fix array initializer; small whitespace clean-up
	* server/upsd.c: server/upsd.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* drivers/powerp-bin.c: drivers/powerp-bin.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* drivers/upscode2.c: drivers/upscode2.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT to
	  reinforce the defensive programming patterns
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_ASSIGN_ENUM
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* drivers/dstate.c: drivers/dstate.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* drivers/main.c: drivers/main.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* clients/upssched.c: clients/upssched.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* clients/upsmon.c: clients/upsmon.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* server/upsd.c: server/upsd.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES to quiesce a
	  system definition of signal routines
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_ASSIGN_ENUM
	* tools/nut-scanner/nutscan-ip.c: tools/nut-scanner/nutscan-ip.c:
	  whitespace/formatting fixes
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c:
	  whitespace/formatting fixes
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_COVERED_SWITCH_DEFAULT
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_STRICT_PROTOTYPES
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_ASSIGN_ENUM to quiesce a
	  thirdparty-strange usecase of enum
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_ASSIGN_ENUM
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  whitespace/formatting fixes
	* tools/nut-scanner/nutscan-ip.h: tools/nut-scanner/nutscan-ip.h:
	  whitespace/formatting fixes
	* tools/nut-scanner/nutscan-device.c: tools/nut-scanner/nutscan-
	  device.c: whitespace/formatting fixes
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  drop semicolons after scope braces

2020-11-28  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: consider "gdlib" pkg-config presence
	  equivalent to "libgd"  There is a discrepancy between OS distro
	  packaging names and the delivered .pc file name...
	* .travis.yml: .travis.yml: mark "gnu*-nowarn-x86-32bit" test cases
	  evergreen

2020-11-27  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: drivers/bcmxcp.{h,c}: typo fix
	  CAPASITOR=>CAPACITOR
	* tests/cpputest.cpp: cpputest.cpp: be sure to be able to handle
	  exception objects

2020-11-26  Jim Klimov <jimklimov@gmail.com>

	* drivers/blazer_usb.c: drivers/blazer_usb.c: annotate
	  #if/#else/#endif relevant to TESTING builds
	* scripts/Solaris/precheck.py: scripts/Solaris/precheck.py: quote
	  shell vars, and report mismatches if any

2020-11-27  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: xenial@s390x does not have "time" for us
	  (missed one beat)

2020-11-26  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: copy-paste
	  typo fix about unreachable code
	* drivers/libusb.c: drivers/libusb.c: copy-paste typo fix about
	  unreachable code

2020-11-27  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: from 32-bit build envs, drop amd64 libs
	  that confuse the linker
	* .travis.yml: .travis.yml: tell the linker to go 32-bit too

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: work around poor packaging of multilib
	  perl in ubuntu
	* .travis.yml: .travis.yml: define a &deps_driverlibs_cross_i386 list
	  for cross-builds (x86 32-bit)
	* .travis.yml: .travis.yml: for x86-32 builds with gnu17 standard,
	  try to change install order for g++-multilib
	* .travis.yml: .travis.yml: for x86-32 builds with gnu99 standard,
	  avoid g++-multilib

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: explicit support on 64-bit Debianish
	  systems for "gcc -m32" at least appears with gcc-multilib and
	  g++-multilib packages

2020-11-03  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: comment for exploring ways to get 32-bit
	  travis builds
	* .travis.yml: Issue #823 follow-up: add explicitly x86 32-bit builds
	  in Travis CI

2020-11-27  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: relax the naming of libgd options seen in
	  the wild

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: warn if libgd is not seen and a "default-
	  all-errors" build might go without CGI binaries

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/phoenixcontact_modbus.c: drivers/phoenixcontact_modbus.c:
	  mrir(): do not shadow global varname "ctx" with same-named func
	  argument
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: possibly_supported():
	  do not shadow global varname "hd" with func argument "hd"

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: drop semicolons after scope braces
	* tools/nut-scanner/nutscan-device.c: tools/nut-scanner/nutscan-
	  device.c: drop semicolons after scope braces
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c: drop
	  semicolons after scope braces
	* drivers/riello.c: drivers/riello.c: drop extra semicolons
	* drivers/bcmxcp.c: drivers/bcmxcp.c: drop semicolons after scope
	  braces
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: drop
	  semicolons after scope braces
	* drivers/powercom.c: drivers/powercom.c: drop semicolons after scope
	  braces
	* drivers/dstate.c: drivers/dstate.c: declare a macro for scoped
	  block in a way that semicolon may follow
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  mark up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c: mark
	  up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: mark up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: mark
	  up NUT_UNUSED_VARIABLEs

2020-11-27  Jim Klimov <jim@jimklimov.com>

	* clients/Makefile.am: clients/Makefile.am:
	  AM_CXXFLAGS+=-I$(top_srcdir)/include

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* tests/example.cpp, tests/nutclienttest.cpp: tests/nutclienttest.cpp
	  example.cpp: wrap into
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_GLOBAL_CONSTRUCTORS et al to
	  avoid warnings for CPPUnit macro implementation (boils down to
	  static vars)
	* tests/cpputest.cpp, tests/example.cpp, tests/nutclienttest.cpp,
	  tests/nutlogtest.c: tests/*.{c,cpp}: update legaleze headings
	* tests/example.cpp: tests/example.cpp: fix casting
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: fix CPPUNIT
	  assert after nullptr
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: fix NULL =>
	  nullptr
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: fix casting
	* tests/Makefile.am: tests/Makefile.am: fix delivery and tracking of
	  CPPUNITTEST(ER)SRC
	* tests/nutlogtest.c: tests/nutlogtest.c: add more tests to
	  investigate NUT_STRARG() behaviors
	* configure.ac, include/str.h, m4/ax_c_pragmas.m4:
	  m4/ax_c_pragmas.m4, str.h => common.h: introduce
	  HAVE_PRINTF_STRING_NULL and NUT_STRARG(x) macro (for issue #904)
	* tests/nutlogtest.c: tests/nutlogtest.c: use
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_OVERFLOW detection to
	  quiesce warnings about "%s" resolving from NULL pointer  First shot
	  at issue NUT #904
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: introduce
	  HAVE_PRAGMA_GCC_DIAGNOSTIC_IGNORED_FORMAT_OVERFLOW detection  First
	  shot at issue NUT #904
	* tests/cpputest.cpp: tests/cpputest.cpp: print final result code
	  more comprehensibly (especially since process exit code is
	  inverted)
	* clients/Makefile.am: clients/Makefile.am: be sure to use NUT
	  libcommon for CXX client builds
	* clients/nutclient.cpp, clients/nutclient.h:
	  clients/nutclient.{h,cpp}: move virtual destructors of exception
	  classes into CPP file to bolt a linker unit (avoid Weak Vtables
	  warnings and related build overheads)
	* clients/nutclient.cpp: clients/nutclient.cpp: (presumed) typo fix -
	  line ended with comma not semicolon
	* clients/nutclient.cpp: clients/nutclient.cpp: quiesce warning and
	  make visible the unused variable
	* clients/Makefile.am: clients/Makefile.am: define HAVE_NUTCOMMON for
	  NUT C++ builds
	* clients/nutclient.cpp: clients/nutclient.cpp: use pragmas for
	  -Wexit-time-destructors and -Wglobal-constructors handling for an
	  std:string static variable
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: define pragmas for -Wexit-
	  time-destructors and -Wglobal-constructors handling
	* clients/nutclient.cpp, clients/nutclient.h:
	  clients/nutclient.{h,cpp}: align strarr_alloc() type with xcalloc()
	  it uses => size_t
	* clients/nutclient.cpp: clients/nutclient.cpp: fix old-style C casts
	  into static_cast<>s
	* clients/nutclient.cpp, clients/nutclient.h: clients/nutclient.cpp:
	  for (clang) c++ builds with C++11/17/20, avoid warnings about C++98
	  compatibility that we do not claim anyway - quiesce in C++ source
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: for (clang) c++ builds with
	  C++11/17/20, avoid warnings about C++98 compatibility that we do
	  not claim anyway - check that we have pragmas for that
	* clients/nutclient.h: clients/nutclient.h: align method docs with
	  param names

2020-11-26  Bastien Nocera <hadess@hadess.net>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: Reindent upower rules
	  header  This piece of the code was really confusing because it
	  looked like, at a glance (and at more than a glance), that the line
	  which we'd have read in the generated rules file was commented out.
	  Turns out that beginning of lines in the generated rules could be
	  in the middle of the line in the code that generated it. Reindent
	  everything so that each line in the output corresponds to one line
	  in the input, except for empty lines.  There are no differences in
	  output between the versions before and after this change.
	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: Simplify exit path  Why
	  "!= usb" when we're already checking for usb and other values
	  above? Always go to the end label if we didn't already jump to the
	  section containing the actual rules.

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: do
	  not wrap variable definitions into parentheses like function
	  pointers
	* drivers/al175.c: drivers/al175.c: declare function(void) prototypes
	  explicitly
	* drivers/netxml-ups.c: drivers/netxml-ups.c:
	  netxml_alarm_subscribe(): explicitly cast range-limited int
	  conversions
	* drivers/powercom.c: drivers/powercom.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* drivers/powerman-pdu.c: drivers/powerman-pdu.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/powercom.c: drivers/powercom.c: annotate upsdrv_shutdown()
	  with noreturn attr
	* drivers/riello_usb.c: drivers/riello_usb.c: annotate shutdown*()
	  with noreturn attr
	* drivers/powercom.c: drivers/powercom.c: annotate shutdown*() with
	  noreturn attr
	* drivers/al175.c: drivers/al175.c: annotate upsdrv_shutdown() with
	  noreturn attr
	* clients/upsmon.c: clients/upsmon.c: annotate forceshutdown() with
	  noreturn attr
	* clients/upsimage.c: clients/upsimage.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* clients/upsimage.c: clients/upsimage.c: annotate lots of routines
	  with noreturn attr
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  mark up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c: mark
	  up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: mark up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c: mark
	  up NUT_UNUSED_VARIABLEs
	* drivers/netxml-ups.c: drivers/netxml-ups.c: align method docs with
	  param names
	* drivers/netxml-ups.c: drivers/netxml-ups.c: align method docs with
	  supported keywords
	* drivers/al175.c: drivers/al175.c: align method docs with param
	  names
	* drivers/hidparser.c: drivers/hidparser.c: satisfy pedantic macro
	  parser (defined vs. used value)
	* drivers/libshut.c: drivers/libshut.c: satisfy pedantic macro parser
	  (defined vs. used value)

2020-11-26  Jim Klimov <jim@jimklimov.com>

	* drivers/libusb.c: drivers/libusb.c: copy-paste typo fix about
	  unreachable code
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: copy-paste
	  typo fix about unreachable code

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now

2020-11-26  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_blazer-common.c: drivers/nutdrv_qx_blazer-
	  common.c: remove overly-eager protection from nonliteral format
	  strings

2020-11-26  Bastien Nocera <hadess@hadess.net>

	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: Fix handling of "bind"
	  events  See https://lwn.net/Articles/837033/ for an in-depth
	  explanation of how "bind" events should be handled in udev rules.
	  In short: " The ACTION line causes the entire file to be skipped
	  for anything other than ADD or CHANGE events; in particular, that
	  is what will happen with BIND events. That will cause properties
	  associated with those events to be lost — and the device in
	  question to be set up improperly (if at all). "

2020-11-26  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: mark "gnu*-nowarn-s390x" test cases
	  evergreen

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: xenial@s390x does not have "time" for us

2020-11-24  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: Issue #823 follow-up: add s390x (BigEndian) builds in
	  Travis CI

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_usb.c: drivers/riello_usb.c: do not hijack system
	  "errno" definition, and no use for local var of that name found
	  anyway
	* drivers/powerman-pdu.c: drivers/powerman-pdu.c: do not assign
	  invalid value not from enum range, especially when for no reason
	  other than to have an un-used initial value
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: cover all values
	  of enum in a switch()  Note: everything not covered before this PR
	  got aliased into default cases. I do not know the hardware and
	  models to rule this out otherwise, possibly assignments of binary
	  and/or smart protocol (lack of?) support are now wrong.
	* drivers/powerp-bin.c: drivers/powerp-bin.c: cover all values of
	  enum in a switch()
	* drivers/bestfcom.c: drivers/bestfcom.c: do not "break" just after
	  "fatalx()"
	* drivers/bcmxcp.c: drivers/bcmxcp.c: do not "break" just after
	  "return"
	* common/strerror.c: common/strerror.c: do not warn about unreachable
	  code in the web of ifdef built blocks
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: fix indentation

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* common/upsconf.c: common/upsconf.c: conf_args(): fix numargs type
	* common/str.c: common/str.c: str_to_{u,}short{,_strict}() routines:
	  explicit cast from temporary variable to return-value type
	* common/common.c: common/common.c: common/common.c: snprintfcat():
	  replace asserts by negative returns (and errno where applicable)
	* common/common.c: common/common.c: common/common.c: snprintfcat():
	  sort out the messy return types (avoid implicit cast in
	  verification assert)

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: do not warn
	  about nonliteral format string in this case
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: do not warn about
	  nonliteral format string in this case
	* drivers/snmp-ups.c: drivers/snmp-ups.c: various routines: do not
	  warn about nonliteral format string in these cases
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c:
	  various routines: do not warn about nonliteral format string in
	  these cases
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: do not warn about
	  nonliteral format string in this case
	* drivers/powerp-bin.c: drivers/powerp-bin.c: do not warn about
	  nonliteral format string in this case
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: do not warn about
	  nonliteral format string in this case
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: do not warn about
	  nonliteral format string in these cases
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: rename scope-local
	  'val' variables that shadow another from same routine
	* drivers/belkinunv.c: drivers/belkinunv.c: do not warn about
	  nonliteral format string in this case
	* drivers/bcmxcp.c: drivers/bcmxcp.c: do not warn about nonliteral
	  format string in this case
	* drivers/serial.c: drivers/serial.c: various routines: do not warn
	  about nonliteral format string in these cases
	* clients/upsset.c: clients/drivers: error_page(): do not warn about
	  nonliteral format string in this case
	* clients/upsmon.c: clients/drivers: do_notify(): do not warn about
	  nonliteral format string in this case
	* clients/upsimage.c: clients/drivers: drawbar() noimage(): do not
	  warn about nonliteral format string in this case
	* clients/upsclient.c: clients/upsclient.c: build_cmd(): do not warn
	  about nonliteral format string in this case
	* clients/upsclient.c: clients/upsclient.c: upscli_strerror(): do not
	  warn about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.h: clients/nutclient.h: declare strarr routines
	  to be seen

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-display.c: tools/nut-scanner/nutscan-
	  display.c: declare nutscan_device_type_string[] file-local variable
	  as static, and fix its indentation

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: drivers/snmp-ups*.{c,h}:
	  export *_info vars to avoid not-used allegations
	* drivers/apcupsd-ups.h: drivers/apcupsd-ups.h: comment away
	  status_info[] as currently un-used
	* drivers/riello.c, drivers/riello.h, drivers/riello_ser.c,
	  drivers/riello_usb.c: drivers/riello*.{c,h}: properly export
	  variables shared between driver subtypes
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: comment away
	  ipmi_config as currently un-used
	* drivers/mge-xml.c, drivers/netxml-ups.c, drivers/netxml-ups.h:
	  drivers/netxml/mge-xml*.{c,h}: export shutdown_duration more
	  usefully
	* drivers/riello.h, drivers/riello_ser.c, drivers/riello_usb.c:
	  drivers/riello*.{c,h}: export get_ups_statuscode() to avoid not-
	  used allegations
	* drivers/libshut.c: drivers/libshut.c: fix pre-declaration of
	  LIBshut_set_report()
	* drivers/al175.c: drivers/al175.c: declare ACT methods to keep
	  compiler happy even if some are not currently used
	* drivers/bcmxcp.c: drivers/bcmxcp.c: comment away FreqTol as
	  currently un-used
	* tools/nut-scanner/nutscan-display.c: tools/nut-scanner/nutscan-
	  display.c: use nut-scan.h header
	* tools/nut-scanner/nutscan-init.c: tools/nut-scanner/nutscan-init.h:
	  use its own header

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: expose load_library() routine

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* server/netcmds.h: server/netcmds.h: declare function(non-void!)
	  prototype explicitly

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* server/netcmds.h: server/netcmds.h: declare function(void)
	  prototype explicitly
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  expose load_library() routine
	* clients/upslog.h: clients/upslog.h: declare function(non-void*)
	  prototype explicitly
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: declare multiple file-local routines
	  as static
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  expose load_library() routine
	* tools/nut-scanner/scan_usb.c: tools/nut-scanner/scan_usb.c: expose
	  load_library() routine
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c:
	  declare a file-local routine as static
	* tools/nut-scanner/scan_nut.c: tools/nut-scanner/scan_nut.c: expose
	  load_library() routine
	* tools/nut-scanner/scan_ipmi.c: tools/nut-scanner/scan_ipmi.c:
	  expose load_library() routine
	* drivers/nut-ipmi.h: drivers/nut-ipmi.h: declare function(void)
	  prototype explicitly
	* drivers/apcsmart.c: drivers/apcsmart.c: declare multiple file-local
	  routines as static
	* drivers/powercom.c: drivers/powercom.c: declare multiple file-local
	  variables as static
	* drivers/oneac.c: drivers/oneac.c: declare multiple file-local
	  routines as static
	* drivers/libshut.c: drivers/libshut.c: declare multiple file-local
	  routines as static
	* drivers/microdowell.c: drivers/microdowell.c: rectify whitespaces
	  (indentations and blank lines)
	* drivers/microdowell.c: drivers/microdowell.c: declare multiple
	  file-local routines as static
	* drivers/microdowell.c: drivers/microdowell.c: declare a driver-
	  local variable as static
	* drivers/metasys.c: drivers/metasys.c: declare multiple file-local
	  routines as static
	* drivers/isbmex.c: drivers/isbmex.c: declare multiple file-local
	  routines as static
	* drivers/gamatronic.c: drivers/gamatronic.c: do not mark common
	  routine as static
	* drivers/gamatronic.c: drivers/gamatronic.c: declare multiple file-
	  local routines as static
	* drivers/bestfortress.c: drivers/bestfortress.c: declare a file-
	  local routine as static
	* drivers/bestfcom.c: drivers/bestfcom.c: declare multiple file-local
	  routines as static
	* drivers/bestfcom.c: drivers/bestfcom.c: declare a driver-local
	  variable as static
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: declare a file-local
	  routine as static
	* drivers/al175.c: drivers/al175.c: declare multiple file-local
	  routines as static
	* server/conf.c: server/conf.c: declare a file-local variable as
	  static
	* server/user.c: server/user.c: declare multiple file-local variables
	  as static, and fix their indentation
	* server/upsd.c: server/upsd.c: declare multiple file-local routines
	  as static
	* server/upsd.c: server/upsd.c: declare multiple file-local variables
	  as static, and fix their indentation
	* server/netcmds.h: server/netcmds.h: declare a file-local variable
	  as static
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: declare a file-local variable as static
	* tools/nut-scanner/nut-scan.h: tools/nut-scanner/nut-scan.h: declare
	  function(void) prototype explicitly
	* tools/nut-scanner/nutscan-device.h: tools/nut-scanner/nutscan-
	  device.h: declare function(void) prototype explicitly
	* tools/nut-scanner/scan_snmp.c: tools/nut-scanner/scan_snmp.c:
	  declare multiple file-local variables as static
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  declare a file-local routine as static
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  declare multiple file-local variables as static
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: declare
	  function(void) prototype explicitly
	* drivers/nut-libfreeipmi.c: drivers/nut-libfreeipmi.c: declare
	  multiple file-local variables as static
	* drivers/nut-ipmipsu.c: drivers/nut-ipmipsu.c: declare multiple
	  file-local variables as static
	* drivers/powerman-pdu.c: drivers/powerman-pdu.c: declare multiple
	  file-local variables as static
	* drivers/netxml-ups.c: drivers/netxml-ups.c: declare a driver-local
	  variable as static
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: declare multiple file-
	  local variables as static
	* drivers/apc-hid.c: drivers/apc-hid.c: declare multiple file-local
	  variables as static
	* drivers/emerson-avocent-pdu-mib.c: drivers/emerson-avocent-pdu-
	  mib.c: declare multiple file-local variables as static
	* drivers/masterguard.c: drivers/masterguard.c: declare multiple
	  file-local variables as static
	* drivers/Makefile.am, drivers/bcmxcp_ser.c, drivers/bcmxcp_ser.h,
	  tools/nut-scanner/scan_eaton_serial.c: Introduce bcmxcp_ser.h to
	  provide as extern some variables from the driver also used in nut-
	  scanner
	* drivers/raritan-px2-mib.c: drivers/raritan-px2-mib.c: declare a
	  driver-local variable as static
	* drivers/snmp-ups.h: clients/snmp-ups.h: declare some setter/getter
	  routines to be seen
	* drivers/snmp-ups.h: drivers/snmp-ups.h: declare function(void)
	  prototype explicitly
	* drivers/snmp-ups.c: drivers/snmp-ups.c: declare multiple file-local
	  routines as static
	* drivers/snmp-ups.c: drivers/snmp-ups.c: declare multiple file-local
	  variables as static
	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: declare
	  multiple file-local variables as static
	* drivers/riello_usb.c: drivers/riello_usb.c: declare multiple file-
	  local routines as static
	* drivers/riello_usb.c: drivers/riello_usb.c: declare multiple file-
	  local variables as static
	* drivers/riello_ser.c: drivers/riello_ser.c: declare multiple file-
	  local routines as static
	* drivers/riello_ser.c: drivers/riello_ser.c: declare multiple file-
	  local variables as static
	* drivers/riello.h: drivers/riello.h: declare function(void)
	  prototype explicitly
	* drivers/riello.c: drivers/riello.c: declare multiple file-local
	  variables as static
	* drivers/apcupsd-ups.h: drivers/apcupsd-ups.h: declare a driver-
	  local variable as static
	* drivers/apcsmart-old.h: drivers/apcsmart-old.h: declare multiple
	  file-local variables as static
	* drivers/victronups.c: drivers/victronups.c: declare multiple file-
	  local variables as static
	* drivers/mge-hid.c: drivers/mge-hid.c: declare multiple file-local
	  variables as static
	* drivers/mge-hid.c: drivers/mge-hid.c: end all info_lkp_t arrays
	  with sentinel entries
	* drivers/apc-hid.h, drivers/libhid.h: Move "extern int
	  max_report_size;" declaration from drivers/apc-hid.h to more
	  suitable drivers/libhid.h
	* drivers/mge-utalk.c: drivers/mge-utalk.c: declare a driver-local
	  variable as static
	* drivers/mge-utalk.h: drivers/mge-utalk.h: declare a driver-local
	  variable as static
	* drivers/metasys.c: drivers/metasys.c: declare multiple file-local
	  variables as static
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: declare multiple
	  file-local routines as static

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* drivers/genericups.h: drivers/genericups.h: declare a driver-local
	  variable as static
	* drivers/gamatronic.h: drivers/gamatronic.h: declare multiple file-
	  local variables as static
	* drivers/bestuferrups.c: drivers/bestuferrups.c: declare a driver-
	  local variable as static
	* drivers/dummy-ups.c: drivers/dummy-ups.c: declare multiple file-
	  local variables as static
	* drivers/dummy-ups.h: drivers/dummy-ups.h: declare a driver-local
	  variable as static
	* drivers/bestuferrups.c: drivers/bestuferrups.c: declare a file-
	  local variable as static
	* drivers/bestfortress.c: drivers/bestfortress.c: declare a file-
	  local variable as static
	* drivers/belkinunv.c: drivers/belkinunv.c: declare multiple file-
	  local variables as static
	* drivers/bcmxcp_ser.c: drivers/bcmxcp_ser.c: declare multiple file-
	  local variables as static
	* drivers/bcmxcp.c: drivers/bcmxcp.c: declare multiple file-local
	  variables as static
	* drivers/main.c: drivers/main.c: declare multiple file-local
	  variables as static, and fix their indentation
	* clients/upssched.c: clients/upssched.c: declare multiple file-local
	  variables as static, and fix their indentation
	* clients/upsmon.h: clients/upsmon.h: declare file-local variable as
	  static: struct notifylist[]
	* clients/upsset.c: clients/upsset.c: declare multiple file-local
	  variables as static, and fix their indentation
	* clients/upsimagearg.h: clients/upsimagearg.h: declare file-local
	  variable as static: struct imgarg[]
	* clients/status.h: clients/status.h: declare file-local variable as
	  static: struct stattab[]
	* clients/upslog.h: clients/upslog.h: declare file-local variable as
	  static: struct logcmds[]
	* clients/upsclient.c: clients/upsclient.c: declare file-local
	  variable as static: struct upscli_errlist[]

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_ser.c: drivers/riello_ser.c: riello_serialcomm(): do
	  not shadow global varname "bufIn" with same-named func argument
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: shut_synchronise(): do not shadow
	  global varnames "upsfd" (from scan_eaton_serial.c and main.c) with
	  func argument "upsfd"

2020-11-25  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.h, tests/nutclienttest.cpp:
	  tests/nutclienttest.cpp: add tests on Device, Variable and Command
	  copying by assignment and by constructor

2020-11-24  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.cpp: clients/nutclient.cpp: whitespace fixes
	  (indentations, blank lines)
	* clients/nutclient.h: clients/nutclient.h: whitespace fixes
	  (indentations)

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.cpp, clients/nutclient.h: nutclient.cpp: match a
	  copy constructor with a copy assignment operator (Device, Variable,
	  Command classes)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/tripplite.c: drivers/tripplite.c: upsdrv_initinfo(): use a
	  literal format string

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: fix diags pragmas to use our configured-support macros
	  for cleaner fencing (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: do not warn about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic-qs-hex.c: drivers/nutdrv_qx_voltronic-
	  qs-hex.c: fix diags pragmas to use our configured-support macros
	  for cleaner fencing (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic-qs-hex.c: drivers/nutdrv_qx_voltronic-
	  qs-hex.c: various routines: do not warn about nonliteral format
	  string in these cases

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic-qs.c: drivers/nutdrv_qx_voltronic-qs.c:
	  fix diags pragmas to use our configured-support macros for cleaner
	  fencing (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic-qs.c: drivers/nutdrv_qx_voltronic-qs.c:
	  do not warn about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_mecer.c: drivers/nutdrv_qx_mecer.c: fix diags
	  pragmas to use our configured-support macros for cleaner fencing
	  (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_mecer.c: drivers/nutdrv_qx_mecer.c: various
	  routines: do not warn about nonliteral format string in these cases

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_blazer-common.c: drivers/nutdrv_qx_blazer-
	  common.c: fix diags pragmas to use our configured-support macros
	  for cleaner fencing (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_blazer-common.c: drivers/nutdrv_qx_blazer-
	  common.c: various routines: do not warn about nonliteral format
	  string in these cases

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: fix diags
	  pragmas to use our configured-support macros for cleaner fencing
	  (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_bestups.c: drivers/nutdrv_qx_bestups.c: various
	  routines: do not warn about nonliteral format string in these cases

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: fix diags pragmas to
	  use our configured-support macros for cleaner fencing (nonliteral
	  format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: do not warn about
	  nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/blazer.c: drivers/blazer.c: fix diags pragmas to use our
	  configured-support macros for cleaner fencing (nonliteral format
	  strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/blazer.c: drivers/blazer.c: various routines: do not warn
	  about nonliteral format string in these cases

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/powerp-txt.c: drivers/powerp-txt.c: fix diags pragmas to
	  use our configured-support macros for cleaner fencing (nonliteral
	  format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/powerp-txt.c: drivers/powerp-txt.c: do not warn about
	  nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-utalk.c: drivers/mge-utalk.c: fix diags pragmas to use
	  our configured-support macros for cleaner fencing (nonliteral
	  format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-utalk.c: drivers/mge-utalk.c: various routines: do not
	  warn about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: fix diags pragmas
	  to use our configured-support macros for cleaner fencing
	  (nonliteral format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfortress.c: drivers/bestfortress.c: setinfo_float():
	  comment about a casting problem, and do not warn about nonliteral
	  format string in this case
	* drivers/bestfortress.c: drivers/bestfortress.c: do not warn about
	  nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/serial.c: drivers/serial.c: fix diags pragmas to use our
	  configured-support macros for cleaner fencing (nonliteral format
	  strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/serial.c: drivers/serial.c: do not warn about nonliteral
	  format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: fix diags pragmas to use our
	  configured-support macros for cleaner fencing (nonliteral format
	  strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: drivers/dstate.c: various routines: do not warn
	  about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* clients/upssched.c: clients/upssched.c: fix diags pragmas to use
	  our configured-support macros for cleaner fencing (nonliteral
	  format strings)

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* clients/upssched.c: clients/upssched.c: send_to_one(): do not warn
	  about nonliteral format string in this case

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common/common.c: fix diags pragmas to use our
	  configured-support macros for cleaner fencing (nonliteral format
	  strings)

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common/common.c: various routines: do not warn
	  about nonliteral format string in these cases

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common/common.c: snprintfcat(): do not warn about
	  nonliteral format string in this case

2020-11-24  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: run gnu17-clang-8-nowarn-ARM-64bit case
	  in fightwarn branches
	* .travis.yml: .travis.yml: annotate clearer the different
	  allowed_failure OS build sections
	* .travis.yml: .travis.yml: point all GCC -std=*++99 to *-98  I
	  thought it was an older GCC quirk, but even new ones complain:
	  g++: error: unrecognized command-line option '-std=gnu++99'; did
	  you mean '-std=gnu++98'? g++ (FreeBSD Ports Collection) 10.0.0
	  20191222 (experimental) Copyright (C) 2019 Free Software
	  Foundation, Inc. This is free software; see the source for copying
	  conditions.  There is NO warranty; not even for MERCHANTABILITY or
	  FITNESS FOR A PARTICULAR PURPOSE.

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: mark gnuXX-gcc-*-arm64 test cases as
	  evergreen
	* .travis.yml: .travis.yml: separate ARM64 test case matrices into
	  ..._viable and ..._fatal subsets
	* .travis.yml: .travis.yml: introduce
	  NUT_MATRIX_TAG="gnu17-gcc-9-nowarn-ARM-64bit" test case
	* .travis.yml: .travis.yml: drop gcc-multilib in ARM builds, seems
	  missing in Debian
	* .travis.yml: .travis.yml: drop arm-32bit builds, seems a no-go on
	  Travis quickly
	* .travis.yml: Issue #823 follow-up: add ARM 32-bit and 64-bit builds
	  in Travis CI

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* drivers/gamatronic.c: drivers/gamatronic.c: rectify whitespaces
	  (indentations and blank lines)

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* drivers/gamatronic.c: drivers/gamatronic.c: fix indentation and
	  scope whitespace
	* drivers/gamatronic.c: drivers/gamatronic.c: fix trailing whitespace
	* common/common.c: common/common.c: cleaner macro processing for
	  BUILD_64

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* include/timehead.h: include/timehead.h: satisfy pedantic macro
	  parser (defined vs. used value)

2020-11-23  Jim Klimov <jim@jimklimov.com>

	* m4/nut_report_feature.m4: m4/nut_report_feature.m4: report the
	  compiler tools and flags ultimately applied to this build
	* .gitignore: GitIgnore configure-test.docbuild* dirs
	* .travis.yml: .travis.yml: separate the matrix for
	  _matrix_freebsd_gnustd_warn_viable and ..._fatal cases
	* .travis.yml: .travis.yml: mark "gnuXX-gcc-freebsd-warn" cases as
	  evergreen to keep that way
	* .travis.yml: .travis.yml: on freebsd, `pkg install libgd`
	  explicitly (needs sudo)
	* .travis.yml: .travis.yml: introduce freebsd test cases with
	  warnings (typo fix)

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: alarm if bogus tests did
	  not fail
	* m4/ax_c_pragmas.m4: m4/ax_c_pragmas.m4: adapt to gcc vs clang CLI
	  capabilities
	* configure.ac, m4/nut_compiler_family.m4: Introduce
	  m4/nut_compiler_family.m4 detection
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: fix diags pragmas
	  to use our configured-support macros for cleaner fencing
	  (unreachable code)
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: fix diags
	  pragmas to use our configured-support macros for cleaner fencing
	  (unreachable code)
	* drivers/libusb.c: drivers/libusb.c: fix diags pragmas to use our
	  configured-support macros for cleaner fencing (unreachable code)
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: fix diags pragmas
	  to use our configured-support macros for cleaner fencing
	  (unreachable code)
	* configure.ac, m4/ax_c_pragmas.m4: Introduce m4/ax_c_pragmas.m4
	* .travis.yml: .travis.yml: curiously, gcc-7 in Travis does not alias
	  -std=gnu++99 to canonic gnu++98
	* autogen.sh: autogen.sh: do not hide the progress of autoreconf
	* ci_build.sh: ci_build.sh: fix whitespace
	* ci_build.sh: ci_build.sh: parameterize $CONFIGURE_SCRIPT as it may
	  be called differently on some platforms
	* .travis.yml: .travis.yml: amend cygwin bin files ACLs to let them
	  execute  Thanks https://stackoverflow.com/a/4493653/4715872 for the
	  hint
	* .travis.yml: .travis.yml: use choco bins in PATH also with
	  /cygdrive/ prefix just in case
	* .travis.yml: .travis.yml: use cygwin bins in PATH also with
	  /cygdrive/ prefix just in case
	* .travis.yml: .travis.yml: allow to skip cygwin autotools install if
	  it was done earlier and cached

2020-11-21  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: use cygwin bins as last resort (e.g. for
	  autoconf)
	* .travis.yml: Revert ".travis.yml: run Windows test cases with
	  cygwin bash"  This reverts commit
	  4592860aa82a208969eb1ae3ac2ec1f96e77bc07.

2020-11-19  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: for windows builds, add
	  /C/tools/cygwin/bin to PATH
	* .travis.yml: .travis.yml: define a NUT_MATRIX_TAG="gnu99-clang-win-
	  warn" test case for completeness

2020-11-22  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: add _matrix_freebsd_gnustd_warn to
	  _matrix_freebsd
	* .travis.yml: .travis.yml: introduce freebsd test cases with nowarn
	  and gnu17
	* .travis.yml: .travis.yml: introduce freebsd test cases with
	  warnings
	* .travis.yml: .travis.yml: mark "gnu99-gcc-freebsd-nowarn" and
	  "gnu99-clang-freebsd-nowarn" as required
	* ci_build.sh: ci_build.sh: as of now, skip building cgi (needs
	  libgd) on freebsd too, for "default-all-errors" test cases
	* .travis.yml: .travis.yml: define simple freebsd scenarios

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: do not warn
	  about unreachable code where we handle a legacy off-chance that
	  fatalx() might not exit the program
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: do not warn about
	  unreachable code where we handle a legacy off-chance that fatalx()
	  might not exit the program
	* drivers/libusb.c: drivers/libusb.c: do not warn about unreachable
	  code where we handle a legacy off-chance that fatalx() might not
	  exit the program
	* server/upsd.c: server/upsd.c: a move "help" switch() handling to
	  default case
	* server/upsd.c: server/upsd.c: a switch() default needs no break
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: a switch() default needs
	  no break
	* drivers/riello_usb.c: drivers/riello_usb.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* drivers/blazer_usb.c: drivers/blazer_usb.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: wrap unreachable
	  exit() added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: control_outlet():
	  do not warn about syntactic "break;" after returns in conditionals
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: wrap unreachable exit()
	  added due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* drivers/metasys.c: drivers/metasys.c: a switch() default needs no
	  break, especially not after fatalx()
	* drivers/dummy-ups.c: drivers/dummy-ups.c: a switch() default needs
	  no break, especially not after fatalx()
	* .gitignore: GitIgnore temporary dirs made by configure script
	  (remain around if it is aborted)
	* clients/upsmon.c: clients/upsmon.c: wrap unreachable exit() added
	  due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* clients/upsmon.c: clients/upsmon.c: wrap unreachable switch()-break
	  after help() with "ifndef HAVE___ATTRIBUTE__NORETURN" to avoid
	  warnings
	* clients/upslog.c: clients/upslog.c: wrap unreachable switch()-break
	  after help() with "ifndef HAVE___ATTRIBUTE__NORETURN" to avoid
	  warnings
	* clients/upscmd.c: clients/upscmd.c: wrap unreachable exit() added
	  due to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* clients/upsc.c: clients/upsc.c: wrap unreachable exit() added due
	  to earlier compiler warnings with "ifndef
	  HAVE___ATTRIBUTE__NORETURN" to avoid opposite warnings now
	* server/upsd.c: server/upsd.c: wrap unreachable exit() added due to
	  earlier compiler warnings with "ifndef HAVE___ATTRIBUTE__NORETURN"
	  to avoid opposite warnings now
	* include/attribute.h: include/attribute.h: align with
	  AX_C___ATTRIBUTE__ autoconf macro
	* m4/ax_c___attribute__.m4: m4/ax_c___attribute__.m4: extend to
	  declare support for certain __attribute__((...)) use-cases of
	  interest to NUT
	* configure.ac, m4/ax_c___attribute__.m4: configure.ac: introduce
	  AX_C___ATTRIBUTE__ from gnu.org
	* server/upsd.c: server/upsd.c: annotate help() with noreturn attr

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* server/upsd.c: server/upsd.c: help(): do not shadow global varnames
	  "progname" (from upsd.c and main.c) with func argument "progname"

2020-11-20  Jim Klimov <jim@jimklimov.com>

	* drivers/nut-ipmipsu.c: drivers/nut-ipmipsu.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: annotate
	  nutusb_open_error() with noreturn attr
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: fix indenting
	  whitespace
	* drivers/riello_ser.c: drivers/riello_ser.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/blazer.c: drivers/blazer.c: annotate upsdrv_shutdown() with
	  noreturn attr
	* drivers/dummy-ups.c: drivers/dummy-ups.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* clients/upsmon.c: clients/upsmon.c: annotate several routines with
	  noreturn attrs
	* clients/upsmon.c: clients/upsmon.c: help(): do not shadow global
	  varname "progname" with same-named func argument
	* clients/upsset.c: clients/upsset.c: annotate several routines with
	  noreturn attrs
	* clients/upsimage.c: clients/upsimage.c: annotate drawimage() with
	  noreturn attr
	* clients/upslog.c: clients/upslog.c: annotate help() with noreturn
	  attr

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: annotate help() with
	  noreturn attr
	* drivers/macosx-ups.c: drivers/macosx-ups.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: annotate
	  upsdrv_shutdown() with noreturn attr
	* drivers/ivtscd.c: drivers/ivtscd.c: annotate upsdrv_shutdown() with
	  noreturn attr
	* drivers/clone.c: drivers/clone.c: annotate upsdrv_shutdown() with
	  noreturn attr
	* drivers/skel.c: drivers/skel.c: annotate upsdrv_shutdown() with
	  noreturn attr
	* drivers/liebert.c: drivers/liebert.c: annotate upsdrv_shutdown()
	  with noreturn attr
	* drivers/serial.c: drivers/serial.c: annotate ser_open_error() with
	  noreturn attr
	* drivers/dstate.c: drivers/dstate.c: annotate sock_fail() with
	  noreturn attr
	* drivers/main.c: drivers/main.c: annotate forceshutdown() with
	  noreturn attr
	* common/parseconf.c: common/parseconf.c: annotate pconf_fatal() with
	  noreturn attr

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: fix typo in recent fix for clang warnings

2020-11-18  Jim Klimov <jimklimov@gmail.com>

	* scripts/Solaris/precheck.py: scripts/Solaris/precheck.py: modernize
	  calling sub-processes for Python 2.6+ and 3+ (keep original way for
	  older systems compat)

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* scripts/augeas/gen-nutupsconf-aug.py: scripts/augeas/gen-
	  nutupsconf-aug.py: drop unused variables  Originally PR meant to
	  drop "global" modifier outside a local function context, but found
	  that nothing defines or uses these three names. Must be some
	  leftover from planned but unfinished development.  Re-ran
	  ./autogen.sh and it generates the same file for the build.

2020-11-18  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.h: drivers/dstate.h: dstate_setaux(): fix missed
	  type change for "aux"
	* drivers/dstate.c: drivers/dstate.c: dstate_setaux(): fix missed
	  type change for "aux"
	* .gitignore: GitIgnore NetBeans project directory

2020-11-16  Jim Klimov <jim@jimklimov.com>

	* .gitignore: GitIgnore .gdb_history files
	* .gitignore: GitIgnore conf??????/ temporary directories that can
	  remain if configure script is aborted
	* .gitignore: GitIgnore conf_nut_report_feature file (made by
	  m4/nut_report)

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/powerman-pdu.c: drivers/powerman-pdu.c: query_one()
	  query_all(): do not shadow global varname "pm" with same-named func
	  argument
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c:
	  subdriver_match_func(): do not shadow global varname "hd" with func
	  argument "hd"
	* drivers/mge-xml.c: drivers/mge-xml.c: numerous routines: do not
	  shadow global varname "val" (for XML element temp store?) with
	  same-named func argument
	* drivers/netxml-ups.c: drivers/netxml-ups.c: send_http_request(): do
	  not shadow global varnames "session" and "uri" with func arguments
	* drivers/upscode2.c: upscode2.c: upsc_setstatus(): do not shadow
	  global varname "status" with func argument "status"
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: callback(): do not
	  shadow global varname "udev" with func argument "udev"
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: callback(): do not
	  shadow global varname "hd" with func argument "hd"
	* drivers/riello.c: drivers/riello.c: riello_calc_CRC(): change data
	  type to fix comparisons
	* drivers/powercom.c: drivers/powercom.c: output_voltage(): avoid a
	  multiplication overflow by casting
	* server/upsd.c: upsd.c: actually include signal.h from system
	* common/common.c: common/common.c: upsdebug_hex() /
	  upsdebug_ascii(): fix const-ness of buf casting
	* common/common.c: common/common.c: get_libname(): fix type to
	  receive strlen()
	* common/state.c, drivers/dstate.c, include/state.h, server/netget.c:
	  state.c dstate.c etc.: fix st_tree_t->aux to "long" as we convert
	  via strtol()
	* common/parseconf.c: common/parseconf.c: addchar(): signedness-aware
	  trim of ctx->ch range
	* common/common.c: common/common.c: mark search_paths[] as a static
	  array
	* common/common.c: common/common.c: snprintfcat(): sort out the messy
	  return types
	* common/common.c: common/common.c: sendsignalfn(): fix pid to "long"
	  as we convert via strtol()
	* common/common.c: common/common.c: writepid(): fix data type for
	  umask()
	* common/parseconf.c: parseconf.c: add_arg_word(): fix argpos to
	  size_t, we do not expect negative offsets
	* clients/upsclient.c, clients/upsclient.h, common/common.c,
	  drivers/apcsmart.c, drivers/serial.c, drivers/serial.h,
	  include/common.h: common, serial, upsclient: change read() and
	  write() operations from "int" to "ssize_t"
	* include/attribute.h: include/attribute.h: satisfy pedantic macro
	  parser (defined vs. used value)
	* drivers/powercom.c: drivers/powercom.c: do not check "if model >=
	  2000" just after processing "model < 2000"
	* drivers/pijuice.c: drivers/pijuice.c: do not check for
	  "powerInput5vIo <= POWER_PRESENT" twice in a row
	* drivers/bcmxcp.c: drivers/bcmxcp.c: do not check for "value>=0"
	  when we pick it from "unsigned char[]" answer
	* common/common.c: common/common.c: search_paths[]: comment the
	  reasoning (see also issue NUT #805)
	* drivers/apcupsd-ups.c: drivers/apcupsd-ups.c: comment about htons()
	  return value range (why I did not fix an "x<0" check)
	* .travis.yml: .travis.yml: run Windows test cases with cygwin bash
	* .travis.yml: .travis.yml: add at least a cygwin automake to Windows
	  test cases
	* .travis.yml: .travis.yml: limit builds on xcode7.x to C11
	* include/parseconf.h: include/parseconf.h: fix trailing whitespace
	* .travis.yml: .travis.yml: mark clang builds with fatal warnings,
	  additionally with -Wno-reserved-id-macro -Wno-padded to play around
	  system header issues

2020-11-16  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: rephrase the notice about looking for
	  required C library routines which are beyond strict C standards

2020-11-10  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: make checks for "Required C library
	  routine" not fatal: -Wall -Werror frowns upon the ways autotools
	  probe the system
	* configure.ac: configure.ac: detect routines that may be not
	  available in constrained standard-C modes

2020-11-16  Jim Klimov <jim@jimklimov.com>

	* configure.ac, m4/nut_stash_warnings.m4: Introduce
	  m4/nut_stash_warnings.m4 and NUT_STASH_WARNINGS and
	  NUT_POP_WARNINGS in configure.ac

2020-11-17  Jim Klimov <jim@jimklimov.com>

	* drivers/solis.c: drivers/solis.c: convert from localtime() to
	  localtime_r() which is thread-safe
	* drivers/rhino.c: drivers/rhino.c: convert from localtime() to
	  localtime_r() which is thread-safe
	* drivers/microdowell.c: drivers/microdowell.c: convert from
	  localtime() to localtime_r() which is thread-safe
	* drivers/mge-hid.c: drivers/mge-hid.c: convert from localtime() to
	  localtime_r() which is thread-safe
	* clients/upsstats.c: clients/upsstats.c: convert from localtime() to
	  localtime_r() which is thread-safe
	* clients/upslog.c: clients/upslog.c: convert from localtime() to
	  localtime_r() which is thread-safe

2020-11-16  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: build_to_only_catch_errors(): also report
	  on `make check` with the current test case
	* .travis.yml: Revert ".travis.yml: DISABLE test case
	  "gnu99-clang-5.0-nowarn": it has some problem with the recently
	  changed "tests/" (and runs clang-7 anyway as it does not use the
	  PPA for 5.0)"  This reverts commit
	  4749e0b26a33990dbd7bb56ff863cfc30db4245e as we can now have this
	  test case working again.
	* configure.ac: configure.ac: do not pick C++11 support if a standard
	  is explicitly requested by caller; fixes NUT issue #873
	* .travis.yml: .travis.yml: fix test cases for
	  NUT_MATRIX_TAG="*-clang-5.0-*" to actually use clang-5.0 explicitly

2020-11-15  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: mark test-case "gnu17-gcc-9-warn" as
	  passing now
	* .travis.yml: .travis.yml: add libnss3-dev and libssl-dev to test
	  against both SSL implems
	* .travis.yml: .travis.yml: DISABLE test case
	  "gnu99-clang-5.0-nowarn": it has some problem with the recently
	  changed "tests/" (and runs clang-7 anyway as it does not use the
	  PPA for 5.0)
	* drivers/snmp-ups.c, m4/nut_check_libnetsnmp.m4: drivers/snmp-ups.c:
	  fix the warning about how we get the size of usmAES128PrivProtocol
	* ci_build.sh: ci_build.sh: configure_nut(): sleep more before data
	  dump so interactive devs can react to the broken configure run
	* ci_build.sh: ci_build.sh: build_to_only_catch_errors(): report a
	  SUCCESS when we have one
	* ci_build.sh: ci_build.sh: allow caller to customize their
	  PKG_CONFIG_PATH
	* tests/Makefile.am: tests/Makefile.am: fix include dir for
	  cppunittest
	* server/netssl.c: server/netssl.c: comment about non-fatal build
	  warnings from NSS include names we use
	* server/netssl.c: server/netssl.c: mark up NUT_UNUSED_VARIABLEs for
	  build with Mozilla NSS
	* clients/upsclient.c: clients/upsclient.c: mark up
	  NUT_UNUSED_VARIABLEs for build with Mozilla NSS
	* m4/nut_check_libnss.m4: nut_check_libnss.m4 : warn that nss.pc is
	  more sensitive to matching PKG_CONFIG_PATH and build bitness than
	  others
	* ci_build.sh: ci_build.sh : enable SSL build variants of "default-
	  all-errors" with both OpenSS and Mozilla NSS
	* m4/nut_check_libnetsnmp.m4: m4/nut_check_libnetsnmp.m4: pick
	  correct bitness net-snmp-config-{32,64} script if available

2020-11-14  Jim Klimov <jim@jimklimov.com>

	* tests/Makefile.am: tests/Makefile.am: fix include dir for
	  nutlogtest

2020-11-10  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml (#823) : green-light several GCC test
	  cases that now pass even with all warnings enabled as fatal
	* clients/upsset.c: clients/upsset.c: refine whitespace

2020-11-09  Jim Klimov <jim@jimklimov.com>

	* drivers/rhino.c: drivers/rhino.c: drop extraneous parentheses
	* drivers/nutdrv_qx.h: drivers/nutdrv_qx.h: avoid a trailing comma in
	  enum list (C89)

2020-11-12  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict: spellcheck new keywords around "fightwarn"
	  chapter

2020-11-10  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt: docs/developers.txt: detail how to use
	  ci_build.sh intended for Travis CI to work on fixing stuff locally

2020-11-13  Jim Klimov <jim@jimklimov.com>

	* tests/cpputest.cpp: tests/cpputest.cpp : wrap the test run to catch
	  exceptions, if any
	* tests/cpputest.cpp: tests/cpputest.cpp : comment the progress
	  through steps
	* tests/cpputest.cpp: tests/cpputest.cpp: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* tests/Makefile.am: tests/Makefile.am : comment the cases where we
	  do not compile CXX tests
	* tests/Makefile.am, tests/nutlogtest.c: Introduce tests/nutlogtest.c
	  for upslog*() and friends

2020-11-12  Jean-Baptiste Boric <Jean-BaptisteBORIC@Eaton.com>

	* drivers/main.c: Fix faulty dump mode logic

2020-11-12  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict

2020-11-10  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : detect abs() and fabs() funcs

2020-11-12  Jim Klimov <jimklimov@gmail.com>

	* docs/acknowledgements.txt: Update acknowledgements.txt  Do not
	  constrain contribution from EVER Power Systems to one person

2020-11-11  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt: docs/developers.txt: document
	  NUT_UNUSED_VARIABLE()

2020-11-10  Jim Klimov <jim@jimklimov.com>

	* include/common.h: include/common.h : drop NUT_UNUSED and
	  NUT_UNUSED_FUNCTION macros as not portable enough
	* drivers/mge-hid.c: drivers/mge-hid.c: mark up NUT_UNUSED_VARIABLEs
	  in the more portable manner
	* drivers/tripplite-hid.c: drivers/tripplite-hid.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/serial.c: drivers/serial.c: mark up NUT_UNUSED_VARIABLEs in
	  the more portable manner
	* drivers/bestfcom.c: drivers/bestfcom.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/dummy-ups.c: drivers/dummy-ups.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/apcsmart-old.c: drivers/apcsmart-old.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/cps-hid.c: drivers/cps-hid.c: mark up NUT_UNUSED_VARIABLEs
	  in the more portable manner
	* drivers/apcsmart.c: drivers/apcsmart.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/bestfortress.c: drivers/bestfortress.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/blazer_usb.c: drivers/blazer_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/apc-hid.c: drivers/apc-hid.c: mark up NUT_UNUSED_VARIABLEs
	  in the more portable manner
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c: mark
	  up NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/riello_usb.c: drivers/riello_usb.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/explore-hid.c: drivers/explore-hid.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* server/upsd.c: server/upsd.c: mark up NUT_UNUSED_VARIABLEs in the
	  more portable manner
	* clients/upssched.c: clients/upssched.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* clients/upsset.c: clients/upsset.c: mark up NUT_UNUSED_VARIABLEs in
	  the more portable manner
	* clients/upsimage.c: clients/upsimage.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* clients/upsstats.c: clients/upsstats.c: mark up
	  NUT_UNUSED_VARIABLEs in the more portable manner
	* clients/upslog.c: clients/upslog.c: mark up NUT_UNUSED_VARIABLEs in
	  the more portable manner
	* clients/upsmon.c: clients/upsmon.c: mark up NUT_UNUSED_VARIABLEs in
	  the more portable manner
	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: mark up NUT_UNUSED_VARIABLEs in the
	  more portable manner
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  mark up NUT_UNUSED_VARIABLEs in the more portable manner
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  mark up NUT_UNUSED_VARIABLEs in the more portable manner
	* drivers/libshut.c, drivers/riello_ser.c, drivers/snmp-ups.c,
	  tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_snmp.c: libshut.c riello_ser.c nut-scanner bits:
	  abolish non-standard u_char and u_short  Probably standard C99
	  "uint8_t" and 16(?) bit short would be more proper, especially for
	  serial-line protocols. But the original code used types derived
	  from hardware implementation sized "char" and "short" - so they
	  stayed this way here.
	* drivers/riello_usb.c: drivers/riello_usb.c: avoid implicit switch
	  fall-through
	* clients/upsc.c: clients/upsc.c: avoid implicit switch fall-through
	* clients/upscmd.c: clients/upscmd.c: avoid implicit switch fall-
	  through
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: avoid implicit switch
	  fall-through
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: avoid implicit switch
	  fall-through
	* drivers/blazer_usb.c: drivers/blazer_usb.c: avoid implicit switch
	  fall-through
	* server/upsd.c: server/upsd.c: add blank lines for readability of
	  opts processing switch
	* server/upsd.c: server/upsd.c: avoid implicit switch fall-through
	* clients/upsstats.h: clients/upsstats.h: wrap with include-guards
	* clients/upssched.h: clients/upssched.h: wrap with include-guards
	* clients/upsmon.h: clients/upsmon.h: wrap with include-guards
	* clients/upslog.h: clients/upslog.h: wrap with include-guards
	* clients/upsimagearg.h: clients/upsimagearg.h: wrap with include-
	  guards
	* clients/status.h: clients/status.h: wrap with include-guards
	* clients/cgilib.h: clients/cgilib.h: wrap with include-guards
	* drivers/tripplite.h: drivers/tripplite.h: wrap with include-guards
	* drivers/safenet.h: drivers/safenet.h: wrap with include-guards
	* drivers/riello.h: drivers/riello.h: reword the wrap with include-
	  guards
	* drivers/powercom.h: drivers/powercom.h: wrap with include-guards
	* drivers/mge-utalk.h: include/mge-utalk.h: wrap with include-guards
	* drivers/oneac.h: drivers/oneac.h: wrap with include-guards
	* drivers/main.h: drivers/main.h: reword the wrap with include-guards
	* drivers/libusb.h: drivers/libusb.h: reword the wrap with include-
	  guards
	* drivers/libshut.h: drivers/libshut.h: reword the wrap with include-
	  guards
	* drivers/libhid.h: drivers/libhid.h: reword the wrap with include-
	  guards
	* drivers/hidparser.h: drivers/hidparser.h: reword the wrap with
	  include-guards
	* drivers/genericups.h: drivers/genericups.h: wrap with include-
	  guards
	* drivers/gamatronic.h: drivers/gamatronic.h: wrap with include-
	  guards and fix trailing whitespace
	* drivers/dummy-ups.h: drivers/dummy-ups.h: wrap with include-guards
	* drivers/apcupsd-ups.h: drivers/apcupsd-ups.h: wrap with include-
	  guards
	* drivers/apcsmart_tabs.h: drivers/apcsmart_tabs.h: reword the wrap
	  with include-guards
	* drivers/apcsmart.h: drivers/apcsmart.h: reword the wrap with
	  include-guards
	* drivers/apcsmart-old.h: drivers/apcsmart-old.h: wrap with include-
	  guards
	* include/upsconf.h: include/upsconf.h: wrap with include-guards
	* include/upsconf.h: include/upsconf.h: add (C) and license header
	* include/upsconf.h: include/upsconf.h: refine whitespace
	* include/timehead.h: include/timehead.h: add (C) and license header
	* include/timehead.h: include/timehead.h: wrap with include-guards
	* include/str.h: include/str.h: reword the wrap with include-guards
	* include/state.h: include/state.h: reword the wrap with include-
	  guards
	* include/proto.h: include/proto.h: add (C) and license header
	* include/proto.h: include/proto.h: reword the wrap with include-
	  guards
	* include/nut_stdint.h: include/nut_stdint.h: reword the wrap with
	  include-guards
	* include/nut_platform.h: include/nut_platform.h: reword the wrap
	  with include-guards
	* include/extstate.h: include/extstate.h: add (C) and license header
	* include/extstate.h: include/extstate.h: reword the wrap with
	  include-guards
	* include/extstate.h: include/extstate.h: refine whitespace
	* include/common.h: include/common.h: reword the wrap with include-
	  guards
	* include/attribute.h: include/attribute.h: add (C) and license
	  header
	* include/attribute.h: include/attribute.h: reword the wrap with
	  include-guards
	* server/user.h: server/user.h: update (C) and license header
	* server/user.h: server/user.h: wrap with include-guards
	* server/user-data.h: server/user-data.h: update (C) and license
	  header
	* server/user-data.h: server/user-data.h: wrap with include-guards
	* server/upstype.h: server/upstype.h: reword the wrap with include-
	  guards
	* server/stype.h: server/stype.h: reword the wrap with include-guards
	* server/sstate.h: server/sstate.h: reword the wrap with include-
	  guards
	* server/nut_ctype.h: server/nut_ctype.h: protect header files for
	  C++ inclusion
	* server/netuser.h: server/netuser.h: wrap with include-guards
	* server/netuser.h: server/netuser.h: add (C) and license header
	* server/netssl.h: server/netssl.h: reword the wrap with include-
	  guards
	* server/netset.h: server/netset.h: wrap with include-guards
	* server/netset.h: server/netset.h: add (C) and license header
	* server/netmisc.h: server/netmisc.h: wrap with include-guards
	* server/netmisc.h: server/netmisc.h: add (C) and license header
	* server/netcmds.h: server/netcmds.h: add (C) and license header
	* server/netlist.h: server/netlist.h: wrap with include-guards
	* server/netlist.h: server/netlist.h: add (C) and license header
	* server/netinstcmd.h: server/netinstcmd.h: wrap with include-guards
	* server/netinstcmd.h: server/netinstcmd.h: add (C) and license
	  header
	* server/netget.h: server/netget.h: wrap with include-guards
	* server/netget.h: server/netget.h: add (C) and license header
	* server/neterr.h: server/neterr.h: protect header files for C++
	  inclusion
	* server/neterr.h: server/neterr.h: wrap with include-guards
	* server/neterr.h: server/neterr.h: add (C) and license header
	* server/netcmds.h: server/netcmds.h: wrap with include-guards
	* server/desc.h: server/desc.h: add (C) and license header
	* server/desc.h: server/desc.h: wrap with include-guards
	* server/conf.h: server/conf.h: update (C) and license header
	* server/conf.h: server/conf.h: wrap with include-guards

2020-11-09  Jim Klimov <jimklimov@gmail.com>

	* docs/nut.dict: Update nut.dict  Add EVER Sinline model name

2020-11-09  Jim Klimov <jim@jimklimov.com>

	* drivers/asem.c: drivers/al175.c: update Linux i2c include mesh
	  (thanks to pijuice.c)
	* drivers/pijuice.c: drivers/pijuice.c: set_power_off(): drop unused
	  "data"
	* drivers/pijuice.c: drivers/pijuice.c: avoid setting "data" during a
	  write  Compiler warnings resolved this puzzle:  [2020-11-09
	  15:10:38] [build-err] pijuice.c:737:2: note: in expansion of macro
	  ‘I2C_WRITE_BYTE’ [2020-11-09 15:10:38] [build-err]   737 |
	  I2C_WRITE_BYTE( upsfd, cmd, shutdown_delay, __func__ ) [2020-11-09
	  15:10:38] [build-err]       |  ^~~~~~~~~~~~~~ [2020-11-09 15:10:38]
	  [build-err] pijuice.c:710:10: warning: variable ‘data’ set but not
	  used [-Wunused-but-set-variable] [2020-11-09 15:10:38] [build-err]
	  710 |  uint8_t data; [2020-11-09 15:10:38] [build-err]       |
	  ^~~~  So we did not need to set it at all, can go to simple
	  anonymous negative-return check.
	* drivers/pijuice.c: drivers/pijuice.c: use "__s32" de-facto in
	  headers instead of "s32" from manpages
	* drivers/pijuice.c: drivers/pijuice.c: rearrange I2C_*() macros to
	  catch -1 error codes while fetching unsigned ints
	* drivers/apcsmart.c: drivers/apcsmart.c: fix variadic macro logx()
	  call to accomodate modern standards
	* drivers/apcsmart.c: drivers/apcsmart.c: fix variadic macro logx()
	  call to accomodate modern standards
	* drivers/apcsmart.c: drivers/apcsmart.c: fix variadic macro debx()
	  call to accomodate modern standards
	* drivers/pijuice.c: drivers/pijuice.c: set_poweroff(): fix limited
	  value range exceeded
	* drivers/pijuice.c: drivers/pijuice.c: replace __FUNCTION__ by
	  __func__ to avoid warnings  error: ISO C does not support
	  '__FUNCTION__' predefined identifier [-Werror=pedantic]
	* drivers/bcmxcp.c: drivers/bcmxcp.c: bump string buffer size to
	  avoid potential overflows  If we have some bug getting outlet
	  numbers into billions (int at 64-bit) the string might overflow
	  indeed...
	* drivers/al175.c: drivers/al175.c: document a warning to address
	  later
	* drivers/snmp-ups.c: drivers/snmp-ups.c: avoid warning: control may
	  reach end of non-void function

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: avoid
	  implicit switch fall-through
	* .travis.yml: .travis.yml: our code (and checks) should not rely on
	  specific compiler features; implicit switch FALLTHRU was solved by
	  explicit goto jumps
	* docs/nut.dict: docs/nut.dict: update for conf/upsstats-
	  single.html.sample
	* docs/developers.txt: docs/developers.txt: avoid spellcheck warning
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  rearrange phases_nb and sanity-check the value to debug-log
	  unexpectancies
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  sanity-check the outlet_group_nb (not negative)

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/hidparser.c: drivers/hidparser.c: hide logging check that
	  never fires  hidparser.c:347:28: error: comparison is always false
	  due to limited range of data type [-Werror=type-limits] 347 |
	  if(pParser->Data.ReportID >= MAX_REPORT) uint8_t vs "500"  CC
	  @aquette

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: drop g_usec_timeout which is not actually
	  used
	* drivers/libusb.c: drivers/libusb.c: fix debug string formatting

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/solis.h: drivers/solis.h: swap "const static" => "static
	  const"  Avoids error: 'static' is not at beginning of declaration
	  [-Werror=old-style-declaration]
	* drivers/solis.c: drivers/solis.c: rectify C-style comments
	* drivers/isbmex.c: drivers/isbmex.c: comment about magic D() macro
	  got debug logging vs. upsdebugx()
	* drivers/rhino.c: drivers/rhino.c: ScanReceivePack(): rephrase if-
	  clause to avoid warnings  Seems this is a correct change logically:
	  - if( !( SourceFail ) == RedeAnterior ) + if( RedeAnterior == !(
	  SourceFail ) )  given this assignment just below the if-clause:
	  RedeAnterior = !( SourceFail );  to avoid a compiler warning that
	  "!" might apply not in a way intended by author
	* drivers/masterguard.c: drivers/masterguard.c: StringSplit(): use
	  the maxlen
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: setvar(): find a
	  use for "val"

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* clients/upssched.c: clients/upssched.c: main(): find use for argc
	* clients/upsmon.c: clients/upsmon.c: sigpipe(): find use for sig
	* clients/upsset.c: clients/upsset.c: print_rw(): find use for
	  upsname

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/blazer_usb.c: drivers/blazer_usb.c: upsdrv_initups():
	  constrain langid_fix scanned values to fit into signed int

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: upsdrv_initups():
	  constrain langid_fix scanned values to fit into signed int

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/netxml-ups.c: drivers/netxml-ups.c: rearrange sscanf() of
	  inputs to avoid wrong int values

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c: avoid
	  buffer overflows iterating item->info_rw, possible NPE, and fix the
	  check for hitting the sentinel entry  Fix warnings like:
	  nutdrv_qx_voltronic.c:4037:39: error: division 'sizeof (info_rw_t
	  *) / sizeof (info_rw_t)' does not compute the number of array
	  elements [-Werror=sizeof-pointer-div]  4037 |  if (i >=
	  (int)(sizeof(item->info_rw) / sizeof(item->info_rw[0]))) { |
	  ^  nutdrv_qx_voltronic.c: In function 'voltronic_p31g_set':
	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c:
	  voltronic_fault(): avoid buffer overflows with sprintf()

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* clients/upscmd.c: clients/upscmd.c: increase buffers to avoid
	  overflow (warnings)
	* clients/upsrw.c: clients/upsrw.c: increase buffers to avoid
	  overflow (warnings)

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/bestfcom.c: drivers/bestfcom.c: increase buffers to avoid
	  overflow (warnings)
	* drivers/bcmxcp.c: drivers/bcmxcp.c: setvar(): increase buffers to
	  avoid overflow (warnings)

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* clients/upssched.c: clients/upssched.c: increase buffers to avoid
	  overflow (warnings)

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: tools/nut-
	  scanner/scan_xml_http.c: avoid possible buffer overflow
	* drivers/snmp-ups.c: drivers/snmp-ups.c: su_alarm_set(): bump
	  alarm_info_value size to avoid print overflows

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/belkin-hid.c: drivers/belkin-hid.c: use fabs() for
	  floating-point math
	* drivers/belkin-hid.c: drivers/belkin-hid.c: use fabs() for
	  floating-point math

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/upscode2.c: drivers/upscode2.c: use fabs() for floating-
	  point math

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/netxml-ups.c: drivers/netxml-ups.c: instcmd(): find a use
	  for "extra"
	* drivers/riello_usb.c: drivers/riello_usb.c: instcmd(): find a use
	  for "extra"
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: instcmd(): find a
	  use for "extra"

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/riello_ser.c: drivers/riello_ser.c: instcmd(): find a use
	  for "extra"
	* drivers/apcsmart-old.c: drivers/apcsmart-old.c: instcmd(): find a
	  use for "extra"
	* drivers/ivtscd.c: drivers/ivtscd.c: instcmd(): find a use for
	  "extra"
	* drivers/clone.c: drivers/clone.c: instcmd(): find a use for "extra"
	* drivers/powerman-pdu.c: drivers/powerman-pdu.c: instcmd(): find a
	  use for "extra"
	* drivers/powerp-txt.c: drivers/powerp-txt.c: powpan_instcmd(): find
	  a use for "extra"
	* drivers/powerp-bin.c: drivers/powerp-bin.c: powpan_instcmd(): find
	  a use for "extra"
	* drivers/victronups.c: drivers/victronups.c: instcmd(): find a use
	  for "extra"

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/tripplitesu.c: drivers/tripplitesu.c: instcmd(): find a use
	  for "extra"
	* drivers/tripplite.c: drivers/tripplite.c: instcmd(): find a use for
	  "extra"
	* drivers/solis.c: drivers/solis.c: instcmd(): find a use for "extra"
	* drivers/nutdrv_siemens_sitop.c: drivers/nutdrv_siemens_sitop.c:
	  instcmd(): find a use for "extra"
	* drivers/safenet.c: drivers/safenet.c: instcmd(): find a use for
	  "extra"
	* drivers/rhino.c: drivers/rhino.c: instcmd(): find a use for "extra"
	* drivers/powercom.c: drivers/powercom.c: instcmd(): find a use for
	  "extra"
	* drivers/optiups.c: drivers/optiups.c: instcmd(): find a use for
	  "extra"
	* drivers/mge-utalk.c: drivers/mge-utalk.c: instcmd(): find a use for
	  "extra"
	* drivers/metasys.c: drivers/metasys.c: instcmd(): find a use for
	  "extra"
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: instcmd(): find a
	  use for "extra"
	* drivers/etapro.c: drivers/etapro.c: instcmd(): find a use for
	  "extra"
	* drivers/dummy-ups.c: drivers/dummy-ups.c: instcmd(): find a use for
	  "extra"
	* drivers/bestups.c: drivers/bestups.c: instcmd(): find a use for
	  "extra"
	* drivers/bestfortress.c: drivers/bestfortress.c: instcmd(): find a
	  use for "extra"
	* drivers/belkinunv.c: drivers/belkinunv.c: instcmd(): find a use for
	  "extra"
	* drivers/belkin.c: drivers/belkin.c: instcmd(): find a use for
	  "extra"
	* drivers/bcmxcp.c: drivers/bcmxcp.c: instcmd(): find a use for
	  "extra"

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* drivers/al175.c: drivers/al175.c: instcmd(): find use for "extra"

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-xml.c: drivers/mge-xml.c: mark up NUT_UNUSED_VARIABLEs
	* drivers/netxml-ups.c: drivers/netxml-ups.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/riello_usb.c: drivers/riello_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/blazer_usb.c: drivers/blazer_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/bcmxcp_usb.c: drivers/bcmxcp_usb.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/tripplite-hid.c: drivers/tripplite-hid.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/explore-hid.c: drivers/explore-hid.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/explore-hid.c: drivers/explore-hid.c: a few whitespace
	  fixes
	* drivers/cps-hid.c: drivers/cps-hid.c: mark up NUT_UNUSED_VARIABLEs
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: mark up
	  NUT_UNUSED_VARIABLEs

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/nutdrv_qx_voltronic.c: drivers/nutdrv_qx_voltronic.c: mark
	  up NUT_UNUSED_VARIABLEs
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/apcsmart-old.c: drivers/apcsmart-old.c: mark up
	  NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  mark up NUT_UNUSED_VARIABLEs
	* server/netuser.c: server/netuser.c: mark up NUT_UNUSED_VARIABLEs
	* server/netmisc.c: server/netmisc.c: mark up NUT_UNUSED_VARIABLEs
	* server/netssl.c: server/netssl.c: mark up NUT_UNUSED_VARIABLEs
	* server/upsd.c: server/upsd.c: mark up NUT_UNUSED_VARIABLEs
	* drivers/upsdrvctl.c: drivers/upsdrvctl.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/apcsmart.c: drivers/apcsmart.c: mark up
	  NUT_UNUSED_VARIABLEs

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-hid.c: drivers/mge-hid.c: mark up NUT_UNUSED_VARIABLEs
	* drivers/libshut.c: drivers/libshut.c: mark up NUT_UNUSED_VARIABLEs
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/dummy-ups.c: drivers/dummy-ups.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/bestfortress.c: drivers/bestfortress.c: mark up
	  NUT_UNUSED_VARIABLEs
	* drivers/bestfcom.c: drivers/bestfcom.c: mark up
	  NUT_UNUSED_VARIABLEs

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_eaton_serial.c: tools/nut-
	  scanner/scan_eaton_serial.c: mark up NUT_UNUSED_VARIABLEs
	* tools/nut-scanner/scan_avahi.c: tools/nut-scanner/scan_avahi.c:
	  mark up NUT_UNUSED_VARIABLEs

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* drivers/serial.c: drivers/serial.c: mark up NUT_UNUSED_VARIABLEs
	* clients/upssched.c: clients/upssched.c: mark up
	  NUT_UNUSED_VARIABLEs
	* clients/upsmon.c: clients/upsmon.c: mark up NUT_UNUSED_VARIABLEs
	* clients/upsset.c: clients/upsset.c: mark up NUT_UNUSED_VARIABLEs
	* clients/upsimage.c, clients/upsstats.c: clients/upsimage.c: mark up
	  NUT_UNUSED_VARIABLEs
	* clients/upsstats.c: clients/upsstats.c: mark up
	  NUT_UNUSED_VARIABLEs
	* clients/upslog.c: clients/upslog.c: mark up NUT_UNUSED_VARIABLEs
	* clients/upsclient.c: clients/upsclient.c: mark up
	  NUT_UNUSED_VARIABLEs for ifdef-ed codepaths

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/apc-hid.c: drivers/apc-hid.c: mark up NUT_UNUSED_VARIABLEs
	  (and comment a FIXME about possible use for that)

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* include/common.h: include/common.h: introduce NUT_UNUSED* macros to
	  mark up codebase

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c: comment about issue found
	  by pedantic compiler  snmp-ups.c: In function 'nut_snmp_init':
	  snmp-ups.c:599:66: error: division 'sizeof (oid * {aka long
	  unsigned int *}) / sizeof (oid {aka long unsigned int})' does not
	  compute the number of array elements [-Werror=sizeof-pointer-div]
	  599 |    g_snmp_sess.securityPrivProtoLen =
	  sizeof(usmAESPrivProtocol)/sizeof(oid); |
	  ^ In file included from /usr/include/net-snmp/snmpv3_api.h:27, from
	  /usr/include/net-snmp/net-snmp-includes.h:78, from snmp-ups.h:79,
	  from snmp-ups.c:39: /usr/include/net-
	  snmp/library/transform_oids.h:50:26: note: first 'sizeof' operand
	  was declared here 50 | NETSNMP_IMPORT oid
	  *usmAES128PrivProtocol; /* backwards compat */ |
	  ^~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors
	  make[1]: *** [Makefile:1953: snmp_ups-snmp-ups.o] Error 1

2020-11-08  Jim Klimov <jimklimov@gmail.com>

	* docs/developers.txt: Update developers.txt  Another spellcheck fix
	* docs/developers.txt: Update developers.txt  Avoid "quiesce" to
	  satisfy the spellchecker

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/apc-hid.c: drivers/apc-hid.c: a few whitespace fixes
	* drivers/openups-hid.c: drivers/openups-hid.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/tripplite-hid.c: drivers/tripplite-hid.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/powercom-hid.c: drivers/powercom-hid.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/cps-hid.c: drivers/cps-hid.c: initialize all fields of
	  info_lkp_t arrays
	* drivers/belkin-hid.c: drivers/belkin-hid.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/apc-hid.c: drivers/apc-hid.c: initialize all fields of
	  info_lkp_t arrays
	* drivers/apc-pdu-mib.c: drivers/apc-pdu-mib.c: define
	  APC_PDU_DEVICE_MODEL macro on top of file
	* drivers/apc-pdu-mib.c: drivers/apc-pdu-mib.c: initialize all fields
	  of mib2nut_info_t arrays
	* drivers/apc-pdu-mib.c: drivers/apc-pdu-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/apc-ats-mib.c: drivers/apc-ats-mib.c: initialize all fields
	  of mib2nut_info_t array
	* drivers/apc-ats-mib.c: drivers/apc-ats-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/eaton-ats16-mib.c: drivers/eaton-ats16-mib.c: initialize
	  all fields of mib2nut_info_t arrays
	* drivers/eaton-ats16-mib.c: drivers/eaton-ats16-mib.c: initialize
	  all fields of info_lkp_t arrays
	* drivers/huawei-mib.c: drivers/huawei-mib.c: initialize all fields
	  of mib2nut_info_t array
	* drivers/huawei-mib.c: drivers/huawei-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/hpe-pdu-mib.c: drivers/hpe-pdu-mib.c: initialize all fields
	  of mib2nut_info_t array
	* drivers/hpe-pdu-mib.c: drivers/hpe-pdu-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/eaton-ats30-mib.c: drivers/eaton-ats30-mib.c: initialize
	  all fields of mib2nut_info_t array
	* drivers/eaton-ats30-mib.c: drivers/eaton-ats30-mib.c: initialize
	  all fields of info_lkp_t arrays
	* drivers/delta_ups-mib.c: drivers/delta_ups-mib.c: initialize all
	  fields of mib2nut_info_t array
	* drivers/delta_ups-mib.c: drivers/delta_ups-mib.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/cyberpower-mib.c: drivers/cyberpower-mib.c: initialize all
	  fields of mib2nut_info_t array
	* drivers/cyberpower-mib.c: drivers/cyberpower-mib.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/bestpower-mib.c: drivers/bestpower-mib.c: initialize all
	  fields of mib2nut_info_t array
	* drivers/bestpower-mib.c: drivers/bestpower-mib.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/xppc-mib.c: drivers/xppc-mib.c: initialize all fields of
	  info_lkp_t arrays, and end sentinel entries to close them off
	* docs/developers.txt, docs/nut.dict: Satisfy the spellchecker
	* drivers/xppc-mib.c: drivers/xppc-mib.c: initialize all fields of
	  mib2nut_info_t array
	* drivers/raritan-pdu-mib.c: drivers/raritan-pdu-mib.c: initialize
	  all fields of mib2nut_info_t array
	* drivers/raritan-px2-mib.c: drivers/raritan-px2-mib.c: initialize
	  all fields of mib2nut_info_t array
	* drivers/raritan-px2-mib.c: drivers/raritan-px2-mib.c: fix
	  indentations
	* drivers/raritan-px2-mib.c: drivers/raritan-px2-mib.c: initialize
	  all fields of info_lkp_t arrays, and fix indentations in the table
	* drivers/raritan-pdu-mib.c: drivers/raritan-pdu-mib.c: initialize
	  all fields of info_lkp_t arrays
	* drivers/powerware-mib.c: drivers/powerware-mib.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/netvision-mib.c: drivers/netvision-mib.c: initialize all
	  fields of mib2nut_info_t array
	* drivers/netvision-mib.c: drivers/netvision-mib.c: initialize all
	  fields of info_lkp_t arrays
	* drivers/mge-mib.c: drivers/mge-mib.c: initialize all fields of
	  mib2nut_info_t array
	* drivers/mge-mib.c: drivers/mge-mib.c: initialize all fields of
	  info_lkp_t arrays
	* drivers/ietf-mib.c: drivers/ietf-mib.c: initialize all fields of
	  mib2nut_info_t arrays
	* drivers/ietf-mib.c: drivers/ietf-mib.c: initialize all fields of
	  info_lkp_t arrays
	* drivers/emerson-avocent-pdu-mib.c: drivers/emerson-avocent-pdu-
	  mib.c: initialize all fields of info_lkp_t arrays
	* drivers/emerson-avocent-pdu-mib.c: drivers/emerson-avocent-pdu-
	  mib.c: initialize all fields of mib2nut_info_t array
	* drivers/eaton-pdu-revelation-mib.c: drivers/eaton-pdu-revelation-
	  mib.c: initialize all fields of mib2nut_info_t array
	* drivers/eaton-pdu-revelation-mib.c: drivers/eaton-pdu-revelation-
	  mib.c: initialize all fields of info_lkp_t arrays
	* drivers/eaton-pdu-pulizzi-mib.c: drivers/eaton-pdu-pulizzi-mib.c:
	  initialize all fields of mib2nut_info_t array
	* drivers/eaton-pdu-pulizzi-mib.c: drivers/eaton-pdu-pulizzi-mib.c:
	  initialize all fields of info_lkp_t arrays
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  initialize all fields of mib2nut_info_t array
	* drivers/eaton-pdu-marlin-mib.c: drivers/eaton-pdu-marlin-mib.c:
	  initialize all fields of info_lkp_t arrays
	* drivers/eaton-pdu-genesis2-mib.c: drivers/eaton-pdu-genesis2-mib.c:
	  initialize all fields of mib2nut_info_t array
	* drivers/compaq-mib.c: drivers/compaq-mib.c: initialize all fields
	  of mib2nut_info_t array
	* drivers/compaq-mib.c: drivers/compaq-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/baytech-mib.c: drivers/baytech-mib.c: initialize all fields
	  of mib2nut_info_t array
	* drivers/baytech-mib.c: drivers/baytech-mib.c: initialize all fields
	  of info_lkp_t arrays
	* drivers/apc-mib.c: drivers/apc-mib.c: initialize all fields of
	  mib2nut_info_t array (and comment concern whether the addition was
	  right?)
	* drivers/apc-mib.c: drivers/apc-mib.c: replace verbatim OID string
	  we seek with a macro APC_UPS_DEVICE_MODEL like elsewhere
	* drivers/apc-mib.c: drivers/apc-mib.c: initialize all fields of
	  info_lkp_t arrays

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/apcsmart_tabs.c: drivers/apcsmart_tabs.c: initialize all
	  fields of upsdrv_info_t array
	* drivers/apcsmart_tabs.c: drivers/apcsmart_tabs.c: initialize all
	  fields of apc_vartab_t arrays
	* tools/nut-scanner/nutscan-serial.c: tools/nut-scanner/nutscan-
	  serial.c: initialize all fields of device_portname_t arrays
	* drivers/upscode2.c: drivers/upscode2.c: initialize all fields of
	  cmd_t and simple_t arrays

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/optiups.c: drivers/optiups.c: initialize all fields of
	  ezfill_t tables
	* drivers/mge-hid.c: drivers/mge-hid.c: update arrays of info_lkp_t
	  with fourth (nuf) field and comment where a real nuf() might be
	  useful
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: update arrays of
	  info_lkp_t with fourth (nuf) field and comment where a real nuf()
	  might be useful
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: update arrays of
	  info_lkp_t with fourth (nuf) field
	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: update HIDDevice_t
	  object with missing initializer for bcdDevice
	* drivers/mge-hid.c: drivers/mge-utalk.c: update arrays of info_lkp_t
	  with fourth (nuf) field
	* drivers/gamatronic.h: drivers/gamatronic.h: initialize the "value"
	  field in the struct array
	* drivers/gamatronic.h: drivers/gamatronic.h: avoid anonymous struct

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix info_lkp_t arrays to
	  consider fourth "nuf" field

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-xml.c: drivers/mge-xml.c: avoid implicit switch fall-
	  through (comment whether that wondering is the right thing to do
	  though)

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/upscode2.c: drivers/upscode2.c: comment the fallthrough in
	  upsc_simple() switch, so far consider it explicitly desired as it
	  was before
	* drivers/isbmex.c: drivers/isbmex.c: replace FALLTHRU comments with
	  more portable and reliable goto jumps

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/isbmex.c: drivers/isbmex.c: upsdrv_updateinfo(): fix
	  switch/break

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* drivers/blazer_usb.c: drivers/blazer_usb.c: avoid implicit switch
	  fall-through
	* drivers/riello_usb.c: drivers/riello_usb.c: avoid implicit switch
	  fall-through
	* drivers/tripplite_usb.c: drivers/tripplite_usb.c: avoid implicit
	  switch fall-through

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  explicit fall through to displaying help
	* drivers/nutdrv_qx.c: drivers/nutdrv_qx.c: qx_command(): explicit
	  fall through the switch
	* drivers/mge-hid.c: drivers/mge-hid.c: replace FALLTHRU comments
	  with same returns as the next default case

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-hid.c: drivers/mge-hid.c: quiesce -Wimplicit-
	  fallthrough=3 warnings about fall-through in switch

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: replace FALLTHRU
	  comments with more portable and reliable goto jumps

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/usbhid-ups.c: drivers/usbhid-ups.c: quiesce -Wimplicit-
	  fallthrough=3 warnings about fall-through in switch

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* clients/upsc.c: clients/upsc.c: replace FALLTHRU comments with more
	  portable and reliable goto jumps

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* clients/upsc.c: clients/upsc.c: quiesce -Wimplicit-fallthrough=3
	  warnings about fall-through in switch

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* common/snprintf.c: common/snprintf.c: replace FALLTHRU comments
	  with more portable and reliable goto jumps

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* common/snprintf.c: common/snprintf.c: quiesce -Wimplicit-
	  fallthrough=3 warnings about fall-through in switch

2020-11-08  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh: refactor to track failing "default-all-
	  errors" so we can extend it to "configure_nut()" and
	  "build_to_only_catch_errors()" more variants
	* ci_build.sh: ci_build.sh: refactor to have a
	  build_to_only_catch_errors() routine
	* ci_build.sh: ci_build.sh: refactor to have a configure_nut()
	  routine
	* docs/developers.txt: docs/developers.txt: document a valid use-case
	  of goto for clean switch-case fall-through

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* include/common.h: include/common.h: introduce NUT_UNUSED* macros to
	  mark up codebase

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml: in NUT_MATRIX test cases, specify
	  -Werror=implicit-fallthrough=3 to let special comments quiesce the
	  warning where a FALLTHRU is intentional
	* .travis.yml: .travis.yml: in clang test cases, do not insist that
	  all macros are used, or we can not pass even autoconf

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml : enable "-Wextra -Weverything" for clang
	  (follow-up to issue #823)
	* .travis.yml: .travis.yml : enable "-Wextra" for newer gcc versions
	  on Linux (follow-up to issue #823)
	* .travis.yml: .travis.yml : enable "-Wextra" for default gcc
	  versions on Linux (follow-up to issue #823)
	* configure.ac: configure.ac: revise the fix for AC_PROG_LIBTOOL to
	  only revert settings already passed to the compiler (that older
	  releases may not understand if we just force them)
	* configure.ac: configure.ac : work around libtool weakness seen by
	  pedantic compilers (did not test for "${CLANG}" so drop it for now)
	* configure.ac: configure.ac : work around libtool weakness seen by
	  pedantic compilers
	* ci_build.sh: ci_build.sh: do not hide autogen.sh stderr
	* ci_build.sh: ci_build.sh: if configure failed, sleep a bit before
	  dumping config.log

2020-11-03  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh : if configure script fails, dump its log
	  before exiting
	* .travis.yml: .travis.yml : rephrase some comments
	* .travis.yml: .travis.yml : separate the "_matrix_gnustd_nowarn"
	* .travis.yml: Issue #823 follow-up: support branches named like
	  "fightwarn" to build more test cases in Travis CI (actually enable
	  those build matrices)
	* .travis.yml: Issue #823 follow-up: support branches named like
	  "fightwarn" to build more test cases in Travis CI

2020-11-07  Jim Klimov <jimklimov@gmail.com>

	* drivers/eaton-ats16-mib.c: Update eaton-ats16-mib.c  Reworded the
	  comments
	* drivers/nutdrv_qx.c: Update nutdrv_qx.c  drivers/nutdrv_qx.c:
	  rectify indentations
	* drivers/tripplite_usb.c: Update tripplite_usb.c
	  drivers/tripplite_usb.c: drop trailing whitespace
	* docs/acknowledgements.txt: Update acknowledgements.txt  Acknowledge
	  a vendor contribution from EVER Power Systems
	* drivers/ever-hid.c: Update ever-hid.c  Small whitespace fixes
	* docs/acknowledgements.txt: Update acknowledgements.txt  Add vendor
	  contribution from AMETEK Powervar for UPM series
	* drivers/liebert-hid.c: Update liebert-hid.c  Minor whitespace fixes

2020-11-06  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac: drop trailing whitespace
	* tools/nut-usbinfo.pl: tools/nut-usbinfo.pl: drop trailing
	  whitespace
	* tools/nut-recorder.sh: tools/nut-recorder.sh: drop trailing
	  whitespace
	* tools/nut-ddl-dump.sh: tools/nut-ddl-dump.sh: drop trailing
	  whitespace
	* tests/nutclienttest.cpp: tests/nutclienttest.cpp: drop trailing
	  whitespace
	* server/user.c: server/user.c: drop trailing whitespace
	* server/upstype.h: server/upstype.h: drop trailing whitespace
	* server/sstate.c: server/sstate.c: drop trailing whitespace
	* server/sockdebug.c: server/sockdebug.c: drop trailing whitespace
	* server/netlist.c: server/netlist.c: drop trailing whitespace
	* server/netinstcmd.c: server/netinstcmd.c: drop trailing whitespace
	* server/netget.c: server/netget.c: drop trailing whitespace
	* server/conf.c: server/conf.c: drop trailing whitespace
	* common/upsconf.c: common/upsconf.c: drop trailing whitespace
	* common/state.c: common/state.c: drop trailing whitespace
	* common/setenv.c: common/setenv.c: drop trailing whitespace
	* common/parseconf.c: common/parseconf.c: drop trailing whitespace
	* clients/upsmon.h: clients/upsmon.h: drop trailing whitespace
	* clients/upsimagearg.h: clients/upsimagearg.h: rectify whitespace
	* clients/upsclient.h: clients/upsclient.h: drop trailing whitespace
	* clients/nutclient.cpp, clients/nutclient.h:
	  clients/nutclient.{cpp,h}: drop trailing whitespace
	* clients/cgilib.c: clients/cgilib.c: drop trailing whitespace
	* drivers/nut-ipmipsu.c, drivers/nut-libfreeipmi.c:
	  drivers/nut-*ipmi**.{c,h}: drop trailing whitespace
	* drivers/netxml-ups.c, drivers/netxml-ups.h: drivers/netxml-
	  ups.{c,h}: drop trailing whitespace
	* drivers/mge-utalk.h, drivers/mge-xml.c, drivers/mge-xml.h:
	  drivers/mge*.{c,h}: drop trailing whitespace
	* drivers/main.h: drivers/main.h: drop trailing whitespace
	* drivers/main.c: Drop exec bit from source file
	* drivers/liebert-hid.h, drivers/liebert.c: drivers/liebert*: drop
	  trailing whitespace
	* drivers/libhid.c: drivers/libhid.h: drop trailing whitespace
	* drivers/idowell-hid.c: drivers/idowell-hid.h: drop trailing
	  whitespace
	* drivers/hidtypes.h: drivers/hidtypes.h: drop trailing whitespace
	* drivers/genericups.h: drivers/genericups.h: drop trailing
	  whitespace
	* drivers/everups.c: drivers/everups.c: drop trailing whitespace
	* drivers/eaton-pdu-pulizzi-mib.c: drivers/eaton-pdu-pulizzi-mib.c:
	  drop trailing whitespace
	* drivers/dummy-ups.h: drivers/dummy-ups.h: drop trailing whitespace
	* drivers/dstate.c: drivers/dstate.c: drop trailing whitespace
	* drivers/delta_ups-mib.c: drivers/delta_ups-mib.c: drop trailing
	  whitespace
	* drivers/cyberpower-mib.c: drivers/cyberpower-mib.c: drop trailing
	  whitespace
	* drivers/blazer.c, drivers/blazer_usb.c: drivers/blazer*.{c,h}: drop
	  trailing whitespace
	* drivers/bestuferrups.c: drivers/bestuferrups.c: rectify
	  indentations
	* drivers/bestuferrups.c: drivers/bestuferrups.c: drop trailing
	  whitespace
	* drivers/belkin-hid.c, drivers/belkin-hid.h: drivers/belkin*.{c,h}:
	  drop trailing whitespace
	* drivers/bcmxcp_io.h, drivers/bcmxcp_ser.c, drivers/bcmxcp_usb.c:
	  drivers/bcmxcp*.{c,h}: drop trailing whitespace
	* drivers/baytech-mib.c: drivers/baytech-mib.c: drop trailing
	  whitespace
	* drivers/apc-mib.c: drivers/apc-mib.c: drop trailing whitespace
	* drivers/apc-hid.c, drivers/apc-hid.h: drivers/apc-hid.{c,h}: drop
	  trailing whitespace
	* drivers/xppc-mib.c: drivers/xppc-mib.h: drop trailing whitespace
	* drivers/tripplite-hid.h: drivers/tripplite-hid.h: drop trailing
	  whitespace
	* drivers/snmp-ups.h: drivers/snmp-ups.h: drop trailing whitespace
	* drivers/skel.c: drivers/skel.c: drop trailing whitespace
	* drivers/richcomm_usb.c: drivers/richcomm_usb.c: drop trailing
	  whitespace
	* drivers/powerware-mib.c: drivers/powerware-mib.c: drop trailing
	  whitespace
	* drivers/openups-hid.c: drivers/openups-hid.c: drop trailing
	  whitespace
	* drivers/oneac.c, drivers/oneac.h: drivers/oneac.{c,h}: drop
	  trailing whitespace
	* drivers/nutdrv_atcl_usb.c: drivers/nutdrv_atcl_usb.c: drop trailing
	  whitespace
	* drivers/riello.c, drivers/riello_ser.c, drivers/riello_usb.c:
	  drivers/riello*.{c,h}: drop trailing whitespaces
	* drivers/apcsmart-old.c, drivers/apcsmart-old.h: drivers/apcsmart-
	  old.{c,h}: drop trailing whitespaces
	* tools/nut-scanner/nut-scanner.c: tools/nut-scanner/nut-scanner.c:
	  fix whitespaces
	* tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-ip.c,
	  tools/nut-scanner/nutscan-ip.h, tools/nut-scanner/scan_avahi.c,
	  tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_ipmi.c, tools/nut-scanner/scan_usb.c: tools/nut-
	  scanner/*.{c,h}: drop trailing whitespaces
	* server/netmisc.c: server/netmisc.c: drop trailing whitespaces
	* server/netssl.c: server/netssl.c: drop trailing whitespaces
	* server/upsd.c: server/upsd.c: drop trailing whitespaces
	* drivers/ivtscd.c: drivers/ivtscd.c: drop trailing whitespaces
	* drivers/powerp-bin.h, drivers/powerp-txt.h, drivers/powerpanel.c,
	  drivers/powerpanel.h: drivers/powerp*.{c,h}: drop trailing
	  whitespaces
	* drivers/powerp-txt.c: drivers/powerp-txt.c: drop trailing
	  whitespaces
	* drivers/powerp-bin.c: drivers/powerp-bin.c: drop trailing
	  whitespaces
	* drivers/victronups.c: drivers/victronups.c: rectify whitespace
	* drivers/upscode2.c: drivers/upscode2.c: rectify whitespace

2020-11-05  Jim Klimov <jim@jimklimov.com>

	* drivers/tripplitesu.c: drivers/tripplitesu.c: drop trailing
	  whitespaces
	* drivers/solis.c, drivers/solis.h: drivers/solis.{c,h}: rectify
	  whitespaces
	* drivers/safenet.c: drivers/safenet.c: drop trailing whitespaces
	* drivers/rhino.c: drivers/rhino.c: normalize whitespace heavily
	* drivers/powercom.c: drivers/powercom.c: rectify leading whitespaces
	* drivers/powercom.c: drivers/powercom.c: drop trailing whitespaces
	* drivers/powercom.h: drivers/powercom.h: drop trailing whitespaces
	* drivers/optiups.c: drivers/optiups.c: rectify whitespaces
	* drivers/hidparser.c: drivers/hidparser.c: drop trailing whitespaces
	* drivers/usb-common.c: drivers/usb-common.c: drop trailing
	  whitespaces
	* drivers/libshut.h, drivers/libusb.h, drivers/usb-common.h:
	  drivers/libshut.h libusb.h usb-common.h: drop trailing whitespaces
	* drivers/libshut.c: drivers/libshut.c: rectify whitespaces per style
	  guide
	* drivers/mge-utalk.c: drivers/mge-utalk.c: drop trailing whitespaces
	* drivers/metasys.c: drivers/metasys.c: drop trailing whitespaces
	* drivers/masterguard.c: drivers/masterguard.c: rectify whitespaces
	  and drop comments opposing the project style guide
	* drivers/masterguard.c: drivers/masterguard.c: drop trailing
	  whitespaces
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: rectify whitespaces
	* drivers/liebert-esp2.c: drivers/liebert-esp2.c: drop trailing
	  whitespaces
	* drivers/isbmex.c: drivers/isbmex.c: rectify whitespaces
	* drivers/isbmex.c: drivers/isbmex.c: drop trailing whitespaces
	* drivers/gamatronic.h: drivers/gamatronic.h: rectify whitespaces
	* drivers/dummy-ups.c: drivers/dummy-ups.c: drop trailing whitespaces
	* drivers/bestups.c: drivers/bestups.c: drop trailing whitespaces
	* drivers/bestfortress.c: drivers/bestfortress.c: rectify whitespaces
	* drivers/bestfcom.c: drivers/bestfcom.c: rectify whitespaces
	* drivers/belkinunv.c: drivers/belkin.c: rectify whitespaces
	* drivers/belkin.c: drivers/belkin.c: drop trailing whitespaces
	* drivers/bcmxcp.c: drivers/bcmxcp.c: fix leading whitespaces

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* drivers/bcmxcp.c: drivers/bcmxcp.c: drop trailing whitespaces
	* drivers/bcmxcp.h: drivers/bcmxcp.h: drop trailing whitespaces
	* drivers/serial.c: drivers/serial.c: drop trailing whitespaces
	* clients/upssched.c: clients/upssched.c: drop trailing whitespaces
	* clients/upsmon.c: clients/upsmon.c: drop trailing whitespaces
	* clients/upsset.c: clients/upsset.c: drop trailing whitespaces
	* clients/upsimage.c: clients/upsimage.c: drop indented whitespaces
	* clients/upsstats.c: clients/upsstats.c: drop trailing whitespaces
	* clients/upslog.c: clients/upslog.c: drop trailing whitespaces
	* clients/upsc.c: clients/upsc.c: drop trailing whitespaces
	* clients/upsclient.c: clients/upsclient.c: drop trailing whitespaces
	* common/snprintf.c: common/snprintf.c: rectify whitespace

2020-11-06  amccartney <andrew.mccartney@ametek.com>

	* drivers/powervar-hid.c: Final clean up and edits for Powervar UPM
	  support

2020-11-04  Jim Klimov <jim@jimklimov.com>

	* configure.ac: Fix issue #833 for (sys/)termios.h on BSD  ...And
	  generally check if we CAN build serial drivers before trying to
	  (and/or guessing if we should try).

2020-11-04  Jim Klimov <jimklimov@gmail.com>

	* drivers/solis.c: Update solis.c  Drop temporary unicode comment for
	  PR
	* drivers/nutdrv_qx_voltronic.c: Update nutdrv_qx_voltronic.c  Drop
	  temporary comment with unicode for PR

2020-11-03  Eric Clappier <ericclappier@eaton.com>

	* drivers/eaton-ats16-mib.c: Apply patch "Nut-scanner fix for
	  discovery ats16 with legacy NMC and newer Network-M2"

2020-10-26  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/eaton-pdu-marlin-mib.c: snmp-ups: fix outlet ID on Eaton
	  ePDU  Tie outlet ID to a real OID, to avoid erroneous indexes (-1,
	  0)
	* docs/nut-names.txt, drivers/eaton-pdu-marlin-mib.c: snmp-ups: fix
	  Eaton ePDU switch ability  Expose a general switchability of the
	  unit, using outlet.switchability, along with a more suitable per-
	  outlet mechanism

2020-10-25  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: docs/man/Makefile.am : @echo diagnostic
	  messages without a trace by default

2020-10-22  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/main.c: Fix dstate init call WRT data dump  Closes:
	  https://github.com/networkupstools/nut/issues/835

2020-10-15  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: docs/man/Makefile.am : in check-man-*
	  targets, count the checked files (to see better the cases where
	  none were available)
	* docs/man/Makefile.am: docs/man/Makefile.am : typo fix ">&@" =>
	  ">&2" for stderr

2020-10-13  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml (#823) : in default builds, disable
	  whatever is not in "_matrix_required"
	* .travis.yml: .travis.yml (#823) : define a _matrix_linux and
	  _matrix_all groupings
	* .travis.yml: .travis.yml (#823) : clarify the distro-dependent
	  relations of matrix jobs as required and allowfail per distro

2020-10-12  Jim Klimov <jimklimov@gmail.com>

	* docs/man/usbhid-ups.txt: Update usbhid-ups.txt  Rearranged lines to
	  keep "all" block together, and finish the list item with a comma
	  without much context change ;)
	* docs/nut.dict: Update nut.dict for PR #733  Add new product name
	  and vendor keywords

2020-10-12  Jim Klimov <jim@jimklimov.com>

	* docs/acknowledgements.txt: docs/acknowledgements.txt: revise the
	  last paragraph for listing corporate contributors

2020-10-12  amccartney <andrew.mccartney@ametek.com>

	* docs/man/usbhid-ups.txt, drivers/powervar-hid.c: Changes per NUT
	  review comments. Removed info fields from polling. Added
	  company/contributor info. Updated docs/man/usbhid-ups.txt

2020-10-12  Jim Klimov <jim@jimklimov.com>

	* docs/nutdrv_qx-subdrivers.txt: docs/nutdrv_qx-subdrivers.txt:
	  revise a few typos
	* docs/configure.txt: docs/configure.txt: update for gdlib pkg-config
	  support (follow-up to #809)
	* docs/configure.txt: docs/configure.txt: update for gdlib pkg-config
	  support (follow-up to #809)

2020-10-12  Jim Klimov <jimklimov@gmail.com>

	* configure.ac: Update configure.ac  Whitespace mess

2020-10-12  Jim Klimov <jim@jimklimov.com>

	* docs/man/upsd.conf.txt: docs/man/upsd.conf.txt: mention that
	  ALLOW_NO_DEVICE envvar (e.g. from nut.conf) can override the
	  setting in upsd.conf
	* conf/nut.conf.sample: conf/nut.conf.sample: fix ALLOW_NO_DEVICE
	  example to "export" it on a separate line

2020-10-12  Jim Klimov <jimklimov@gmail.com>

	* .travis.yml: .travis.yml (#823) : win bash has no time

2020-10-12  Konstantin Gizdov <kgizdov@gmail.com>

	* drivers/usbhid-ups.c: address some comments

2020-10-12  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: ci_build.sh (#823) : add gnu99-clang-win-nowarn
	* ci_build.sh: ci_build.sh (#823) : only call dpkg on linux
	* ci_build.sh: ci_build.sh (#823) : investigate win autogen
	* .travis.yml: .travis.yml (#823) : fix delivery of ccache to win
	  builds

2020-10-11  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml (#823) : do not cache /usr/local/Cellar on
	  osx, it is too big and rejected anyway
	* .travis.yml: .travis.yml (#823, #828) : extend matrix for osx
	  builds with -std=gnu* variants that seem to pass
	* .travis.yml: .travis.yml (#823) : for osx builds, avoid "brew
	  update" by default, that since 2.0.0 release involves cleanup
	  automagically and takes a needless 15-30 minutes hit on a Travis
	  worker  When desired we can set HOMEBREW_NO_AUTO_UPDATE
	  customizable per run
	* .travis.yml: .travis.yml (#823) : for osx builds, add ccache; and
	  only bother for asciidoc + docbook-xsl if building docs
	* .travis.yml: .travis.yml (#823) : cache locations related to Brew
	  between runs
	* .travis.yml: .travis.yml (#823) : for now, enable CI_TRACE on Win
	  always (to find where ci_build.sh script dies)
	* .travis.yml: .travis.yml : set jobs.fast_finish:true

2020-10-10  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml (#823) : group tests into YAML _matrix-*
	  lists to pick some easier for particular runs on dev branches
	* .travis.yml: .travis.yml (#823) : xcode6.4 is deprecated on Travis,
	  try a newer oldest alternative (7.3)
	* .travis.yml: .travis.yml (#823) : add c99-clang-xcode10.2-warn
	* .travis.yml: .travis.yml (#823) : reorder some allowed_failure
	  tests to group logically
	* .travis.yml: .travis.yml (#823) : drop gnu14-gcc-8-nowarn (no C14),
	  add gnu17-clang-8-nowarn
	* .travis.yml: .travis.yml (#823) : drop gnu14 and gnu17 attempts
	  with gcc-7; try gnu14 with gcc-8
	* .travis.yml: .travis.yml (#823) : mark gnu17-gcc-9-nowarn as OK
	* ci_build.sh: .travis.yml (#823) : give up on gdlib (--with-cgi) on
	  win for now
	* .travis.yml: .travis.yml (#823) : add a few MacOS X and
	  Windows+clang9 build combos for diversity
	* .travis.yml: .travis.yml (#823) : add more compilers and standards
	  to try, to collect max diags: c17-clang-8-warn gnu17-gcc-9-warn
	* .travis.yml: .travis.yml (#823) : add more compilers and standards
	  to try : gnu14-gcc-7-nowarn gnu17-gcc-7-nowarn gnu17-gcc-9-nowarn
	  c99-clang-3.5-nowarn c17-clang-8-nowarn
	* .travis.yml: .travis.yml (#823) : specify "compiler" in our
	  handmade matrix to hint to Travis which env we want
	* .travis.yml: .travis.yml (#823) : comment the reference of C/C++
	  standard support by gcc and clang versions used
	* .travis.yml: .travis.yml : reshuffle default required builds order
	  to have the quicker ones more likely to fail in development
	  iterations to run first
	* .travis.yml: .travis.yml : move BUILD_TYPE=default and
	  BUILD_TYPE=default-tgt:distcheck-light into common stack for
	  manageability
	* .travis.yml: .travis.yml: declare linux "dist" that we want by
	  default
	* ci_build.sh: ci_build.sh: handle runs with unspecified BUILD_TYPE
	* ci_build.sh: ci_build.sh: report if PATH includes ccache, and if CC
	  and CXX understand passed C(XX)FLAGS
	* ci_build.sh: ci_build.sh: report values of PATH, CC and CXX (and
	  versions of the latter) before adding CCACHE into the mix

2020-10-09  Konstantin Gizdov <kgizdov@gmail.com>

	* drivers/usbhid-ups.c: more compact logic
	* drivers/usbhid-ups.c: remove leftover lines
	* drivers/usbhid-ups.c: lay the groundwork for CyberPower UT
	  cputquirk
	* drivers/usbhid-ups.c: fix indentation style

2017-10-03  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/configure.txt: Remove an extraneous point
	* docs/configure.txt: Update configure documentation for libusb
	  Document the possibility to override the auto-detection choice,
	  even though the implementation of this override is not yet
	  currently working

2020-10-09  Jim Klimov <jim@jimklimov.com>

	* docs/developers.txt: docs/developers.txt : document coding style
	  examples for tabs vs spaces
	* docs/developers.txt: docs/developers.txt : document a "for loop
	  initial declarations are only allowed in C99 or C11 mode"
	  portability offense
	* docs/developers.txt: docs/developers.txt : document the official
	  C99+ standard support and that we have CI to help make sure what is
	  upheld
	* .travis.yml: .travis.yml : update comment for the NUT_MATRIX_TAG
	  block of tests
	* .travis.yml: .travis.yml : fix comment-naming for cDefault-gcc-
	  default-nowarn/gnu99-gcc-default-nowarn primary not-failing case to
	  keep up
	* .travis.yml: .travis.yml : mark gnu89-gcc-default-nowarn as a not-
	  failing case to keep up
	* drivers/solis.c: drivers/solis.c : fix C89 for-loop var
	  declarations
	* .travis.yml: .travis.yml : mark gnu11-gcc-7-nowarn
	  gnu99-clang-5.0-nowarn as not-failing cases to keep up
	* .travis.yml: .travis.yml : add gnu89-gcc-default-nowarn to the test
	  matrix to check if at least the basic syntax is okay (note that
	  current warnings for C89 seem to indicate faults that may be fatal
	  in binary code)
	* .travis.yml: .travis.yml : mark gnu99-gcc-7-nowarn as a not-failing
	  case to keep up
	* .travis.yml: .travis.yml : add gnu99-clang-5.0-nowarn to the test
	  matrix (hope clang can do GNU C dialect)
	* .travis.yml: .travis.yml : add gnu11-gcc-7-nowarn to the test
	  matrix

2020-10-08  Alexey Rodionov <alexey.rodionov@red-soft.ru>

	* .../python/app/locale/ru/LC_MESSAGES/NUT-Monitor.mo,
	  scripts/python/app/locale/ru/ru.po: Fixed two typos and translation
	  of the term load

2020-10-08  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml : add c11-clang-5.0-nowarn and
	  c11-clang-5.0-warn to the matrix
	* .travis.yml: .travis.yml : add gnu99-gcc-7-nowarn
	  c99-clang-5.0-nowarn to test matrix (expected to be green)
	* .travis.yml: .travis.yml : warning comment about multitoken CFLAGS
	  and distcheck
	* ci_build.sh: ci_build.sh : spell case statements in consistent
	  style
	* ci_build.sh: ci_build.sh : define default-all-errors separately
	  from default-alldrv

2020-08-08  Sean McBride <sean@rogue-research.com>

	* clients/cgilib.c, clients/nutclient.cpp, clients/upsmon.c,
	  clients/upsset.c, drivers/al175.c, drivers/apcsmart-old.c,
	  drivers/asem.c, drivers/bcmxcp.c, drivers/belkinunv.c,
	  drivers/dstate.c, drivers/gamatronic.c, drivers/isbmex.c,
	  drivers/mge-utalk.c, drivers/nut-libfreeipmi.c,
	  drivers/nutdrv_qx_voltronic-qs-hex.c,
	  drivers/nutdrv_qx_voltronic.c, drivers/oneac.c, drivers/powercom.c,
	  drivers/rhino.c, drivers/riello_ser.c, drivers/snmp-ups.c,
	  drivers/solis.c, drivers/tripplite_usb.c, drivers/tripplitesu.c,
	  server/netssl.c, tools/nut-scanner/scan_nut.c: WIP: Fixed various
	  warnings and errors identified by cppcheck  Specifically:
	  arrayIndexThenCheck,drivers/nutdrv_qx_voltronic-qs-
	  hex.c:222,style,Array index 'i' is used before limits check.
	  arrayIndexThenCheck,drivers/oneac.c:176,style,Array index 'i' is
	  used before limits check.
	  clarifyCalculation,drivers/belkinunv.c:1063,style,Clarify
	  calculation precedence for '&' and '?'.
	  clarifyCalculation,drivers/belkinunv.c:922,style,Clarify
	  calculation precedence for '&' and '?'.
	  clarifyCalculation,drivers/powercom.c:677,style,Clarify calculation
	  precedence for '&' and '?'.
	  clarifyCalculation,drivers/powercom.c:732,style,Clarify calculation
	  precedence for '&' and '?'.
	  clarifyCondition,drivers/asem.c:248,style,Boolean result is used in
	  bitwise operation. Clarify expression with parentheses.
	  duplicateConditionalAssign,drivers/solis.c:725,style,The statement
	  'if (DaysOnWeek!=DaysOffWeek) DaysOnWeek=DaysOffWeek' is logically
	  equivalent to 'DaysOnWeek=DaysOffWeek'.
	  duplicateExpression,clients/cgilib.c:49,style,Same expression on
	  both sides of '||'.
	  duplicateExpression,drivers/nutdrv_qx_voltronic.c:270,style,Same
	  expression on both sides of '||'.
	  duplicateExpression,drivers/nutdrv_qx_voltronic.c:303,style,Same
	  expression on both sides of '||'.
	  duplicateExpression,drivers/nutdrv_qx_voltronic.c:397,style,Same
	  expression on both sides of '||'. identicalInnerCondition,drivers/t
	  ripplite_usb.c:579,warning,Identical inner 'if' condition is always
	  true. incorrectLogicOperator,drivers/dstate.c:1170,warning,Logical
	  conjunction always evaluates to false: c2 && !c2.
	  incorrectLogicOperator,drivers/rhino.c:190,warning,Logical
	  disjunction always evaluates to true: BattVoltage > 129 ||
	  BattVoltage < 144. incorrectStringBooleanError,drivers/mge-
	  utalk.c:899,warning,Conversion of string literal "\r\n" to bool
	  always evaluates to true.
	  invalidPrintfArgType_sint,clients/upsset.c:393,warning,%d in format
	  string (no. 1) requires 'int' but the argument type is 'unsigned
	  int'. invalidPrintfArgType_sint,clients/upsset.c:676,warning,%d in
	  format string (no. 1) requires 'int' but the argument type is
	  'unsigned int'.
	  invalidPrintfArgType_sint,drivers/isbmex.c:178,portability,%d in
	  format string (no. 1) requires 'int' but the argument type is
	  'ssize_t {aka signed long}'.
	  invalidPrintfArgType_sint,drivers/tripplitesu.c:435,warning,%d in
	  format string (no. 1) requires 'int' but the argument type is
	  'unsigned int'.
	  knownConditionTrueFalse,clients/upsmon.c:919,style,Condition 'un'
	  is always true
	  knownConditionTrueFalse,drivers/gamatronic.c:111,style,Condition
	  'ret>=0' is always true
	  knownConditionTrueFalse,drivers/powercom.c:696,style,Condition
	  'battval>bat0' is always true
	  knownConditionTrueFalse,drivers/solis.c:485,style,Condition
	  'AppPower==0' is always false knownConditionTrueFalse,tools/nut-
	  scanner/scan_nut.c:180,style,Condition 'numa>=3' is always true
	  memleak,clients/upsset.c:664,error,Memory leak: val
	  nullPointerRedundantCheck,drivers/snmp-ups.c:1554,warning,Either
	  the condition 'info_template==NULL' is redundant or there is
	  possible null pointer dereference: info_template.
	  pointerLessThanZero,drivers/nut-libfreeipmi.c:864,style,A pointer
	  can not be negative so it is either pointless or an error to check
	  if it is. pointerLessThanZero,drivers/nut-libfreeipmi.c:884,style,A
	  pointer can not be negative so it is either pointless or an error
	  to check if it is.
	  postfixOperator,clients/nutclient.cpp:896,performance,Prefer prefix
	  ++/-- operators for non-primitive types.
	  redundantInitialization,drivers/al175.c:548,style,Redundant
	  initialization for 'reply'. The initialized value is overwritten
	  before it is read.
	  uninitMemberVar,clients/nutclient.cpp:504,warning,Member variable
	  'TcpClient::_timeout' is not initialized in the constructor.
	  uninitMemberVar,clients/nutclient.cpp:513,warning,Member variable
	  'TcpClient::_timeout' is not initialized in the constructor.
	  uninitvar,server/netssl.c:546,error,Uninitialized variable: ret
	  unsignedLessThanZero,drivers/apcsmart-old.c:928,style,Checking if
	  unsigned expression 'sdtype' is less than zero.
	  unsignedPositive,drivers/bcmxcp.c:785,style,Unsigned expression
	  'commandByte' can't be negative so it is unnecessary to test it.
	  uselessAssignmentPtrArg,drivers/riello_ser.c:105,warning,Assignment
	  of function parameter has no effect outside the function. Did you
	  forget dereferencing it?

2020-10-08  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh : revise multi-token CONFIG_OPTS entries
	* .travis.yml, ci_build.sh: .travis.yml / ci_build.sh : define a
	  BUILD_TYPE=default-all-errors specifically to list all files with
	  errors fatal for current build config (but not list whatever
	  succeds)
	* ci_build.sh: ci_build.sh : allow to stack multi-token CC="ccache
	  clang" and such
	* ci_build.sh: ci_build.sh : recognize is_clang() for ccache wrapping
	* ci_build.sh: ci_build.sh : recognize is_clang()
	* .travis.yml, ci_build.sh: Issue #823 : Set up Travis CI testing for
	  more compiler implementations and C/C++ standards
	* ci_build.sh: ci_build.sh : fix a few historic typos
	* ci_build.sh: ci_build.sh: make sure we build all possible binaries
	  in default-alldrv mode

2020-10-08  Alexey Rodionov <alexey.rodionov@red-soft.ru>

	* .../app/locale/ru/LC_MESSAGES/NUT-Monitor.mo,
	  scripts/python/app/locale/ru/ru.po: Additional corrections of the
	  Russian translation
	* .../app/locale/ru/LC_MESSAGES/NUT-Monitor.mo,
	  scripts/python/app/locale/ru/ru.po: Fixed typos, made changes
	  according to comments

2020-10-08  Jim Klimov <jim@jimklimov.com>

	* drivers/Makefile.am: drivers/Makefile.am : drop redundant
	  pijuice_SOURCES listed in wrong section

2020-10-07  Jim Klimov <jim@jimklimov.com>

	* docs/man/snmp-ups.txt, docs/nut.dict: Update snmp-ups manpage for
	  symmetrathreephase quirk to complete PR #788

2020-10-07  Jim Klimov <jimklimov@gmail.com>

	* drivers/snmp-ups.c: Update snmp-ups.c  Fixed indentation for
	  multiline if-clause

2020-10-07  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am, docs/man/index.txt, docs/man/pijuice.txt,
	  docs/nut.dict: Add initial manpage for pijuice driver, hastily
	  ripped off one for asem driver
	* drivers/pijuice.c: pijuice.c cleanup : rectify leading indentations
	* drivers/pijuice.c: pijuice.c cleanup : rectify tabulation of
	  definitions
	* drivers/pijuice.c: pijuice.c cleanup : comment end of big block of
	  nested #if macros
	* drivers/pijuice.c: pijuice.c cleanup : rectify indentation and
	  blank-line the default return
	* drivers/pijuice.c: pijuice.c cleanup : indent stacked #if* macros
	* drivers/pijuice.c: pijuice.c cleanup : trailing whitespaces

2020-10-07  Jim Klimov <jimklimov@gmail.com>

	* clients/upsmon.c: Update upsmon.c  Log a warning if an UPS is both
	  OB+LB+Calibrating so due to this combo we do not tell the host to
	  shut down gracefully. Comment some ideas to work around such
	  situation in a smarter way if we have additional info to know if we
	  are in a safe environment just calibrating, or a known-unsafe one
	  with a real outage in progress.
	* common/state.c: state.c: state_delinfo(): comment on immutables
	  For `state_delinfo()` not deleting immutable variables, comment
	  this near the function and log for runtime hits to help
	  troubleshooting.

2020-10-06  Arnaud Quette <ArnaudQuette@eaton.com>

	* drivers/main.c: Driver datadump improvements  Do not switch to
	  statepath, nor write pidfile, when using the datadump (-s -d) mode

2020-09-22  Ross Williams <ross@ross-williams.net>

	* clients/upsmon.c, clients/upsmon.h: Do not shutdown if UPS is
	  performing calibration  Some UPS calibration procedures (e.g.
	  CyberPower) involve discharging the battery below the LB level, but
	  we don't want systems to shut down if the UPS is only on battery
	  because it is calibrating.

2019-04-01  Ross Williams <ross@ross-williams.net>

	* drivers/cyberpower-mib.c: cyberpower-mib: fix instant command
	  declarations  Had desired OID values in default value field. Also,
	  default value for SU_TYPE_CMD should be NULL.

2019-03-29  Ross Williams <ross@ross-williams.net>

	* drivers/cyberpower-mib.c: cyberpower-mib: Add instant commands

2019-04-01  Ross Williams <ross@ross-williams.net>

	* drivers/cyberpower-mib.c: cyberpower-mib: got delay OID wrong  Left
	  off .0
	* drivers/cyberpower-mib.c: cyberpower-mib: Add delay variables  Add
	  some read/write variables affecting the sleep delay and return
	  delay.
	* drivers/cyberpower-mib.c: cyberpower-mib: fix instant command
	  declarations  Had desired OID values in default value field. Also,
	  default value for SU_TYPE_CMD should be NULL.
	* drivers/cyberpower-mib.c: cyberpower-mib: NUT runtime is seconds
	  not minutes
	* drivers/cyberpower-mib.c: cyberpower-mib: clarify status values
	* drivers/cyberpower-mib.c: cyberpower-mib: correct sysOID  At least
	  newer CyberPower management cards report a sysOID of CPS-MIB::ups,
	  not the base CyberPower enterprise MIB that was previously defined.

2019-03-29  Ross Williams <ross@ross-williams.net>

	* drivers/cyberpower-mib.c: cyberpower-mib: Add instant commands
	* drivers/cyberpower-mib.c: cyberpower-mib: add support for battery
	  status  Reports LB, CAL, and RB flags

2020-08-12  Konstantin Gizdov <kgizdov@gmail.com>

	* drivers/usbhid-ups.c: initial patch that works

2020-07-29  Fabrice Fontaine <fontaine.fabrice@gmail.com>

	* m4/nut_check_libgd.m4: nut_check_libgd.m4: try to find gd through
	  pkg-config  gdlib-config has been dropped from version 2.3.0 with h
	  ttps://github.com/libgd/libgd/commit/d62f608c7c4a814c70d4ba777725e3
	  e62d9e2cde

2020-07-21  Luka Kovačič <luka.kovacic@builtin.io>

	* drivers/delta-hid.c: drivers: delta-hid: Update entry flags
	  appropriately  Update entry flags to use HU_FLAG_QUICK_POLL for
	  status and alarm variables, HU_FLAG_SEMI_STATIC for variables that
	  can change on user changes and HU_FLAG_STATIC for variables that
	  don't need to be updated after init.

2020-07-02  Luka Kovačič <luka.kovacic@builtin.io>

	* drivers/Makefile.am, drivers/delta-hid.c, drivers/delta-hid.h,
	  drivers/usbhid-ups.c, scripts/upower/95-upower-hid.rules: drivers:
	  delta-hid: Add Delta HID subdriver  Delta HID subdriver is added to
	  support Delta RT Series, Single Phase, 1/2/3 kVA UPS devices.  The
	  driver was tested and tweaked on Delta RT 3 kVA UPS.

2020-07-17  Alexey Rodionov <alexey.rodionov@red-soft.ru>

	* .../app/locale/ru/LC_MESSAGES/NUT-Monitor.mo,
	  scripts/python/app/locale/ru/ru.po: Add Russian translation for
	  NUT-Monitor

2020-07-11  Matt Merhar <mattmerhar@protonmail.com>

	* docs/security.txt: Fix typo in TCP Wrappers documentation

2020-06-15  Florian Bernd <flobernd@users.noreply.github.com>

	* drivers/apcupsd-ups.c: Do not overwrite `poll_interval` in
	  `apcupsd-ups`  This commit removes the hardcoded poll-interval of
	  60 seconds and instead only makes sure that the user-defined
	  interval is greater than a minimum-interval.
	* drivers/apcupsd-ups.c, drivers/apcupsd-ups.h: Do not call
	  `dstate_delinfo()` for LB-condition variables  This commit fixes
	  the `ignorelb` flag for the `apcupsd-ups` driver. Previusly
	  "battery.charge" and "battery.runtime" was cleared before invoking
	  `status_commit()` which caused the LB-condition to always be
	  `false`.
	* common/state.c: Respect `ST_FLAG_IMMUTABLE` in `dstate_delinfo()`

2020-06-11  Eric Zinnikas <eric@zinnikas.org>

	* drivers/cyberpower-mib.c: Support CyberPower RMCARD205

2020-06-11  Peter Klein <kleinpa00@gmail.com>

	* clients/nutclient.cpp, clients/nutclient.h: Remove dynamic
	  exception specifications from clients/nutclient.cpp  These are
	  invalid in c++17 and must be removed for compatibility with modern
	  compilers.

2020-06-02  Jim Klimov <jim@jimklimov.com>

	* drivers/apc-ats-mib.c: apc-ats-mib.c : use a ..._MODEL_NAME macro
	  and bump version to complete earlier fix

2020-05-31  Timothy Pearson <tpearson@raptorengineering.com>

	* drivers/snmp-ups.c: Fix long-standing transfer threshold read bug
	  with APCC 3 phase Symmetra units

2020-05-14  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/scan_snmp.c: SNMP scan: check the match dup on
	  'mib' instead of 'sysoid'  This actually avoids duplication when
	  multiple sysOIDs are declared for the same MIB

2020-05-01  gprints <g.s@arcor.de>

	* drivers/liebert-hid.c: Update liebert-hid.c

2020-04-28  Arnaud Quette <Arnaud.Quette@free.fr>

	* drivers/eaton-ats16-mib.c: snmp-ups: cleanup Eaton ATS16 with new
	  Network-M2  Duplicate the definition, as a workaround to the bugger
	  scanner data extraction, and point at the same eaton_ats16 name,
	  since there is no interest in separating mib2nut entries pointing
	  at the same MIB mapping

2020-01-15  Clappier, Eric <EricClappier@eaton.com>

	* drivers/ietf-mib.c: Issue corection filter ietf mib  (cherry picked
	  from commit 93a64efbdae28355be60329b651d3c42c7ddedf8)

2020-04-28  Arnaud Quette <Arnaud.Quette@free.fr>

	* tools/nut-snmpinfo.py: Fix Python issue in the SNMP scan extractor

2020-01-15  Clappier, Eric <EricClappier@eaton.com>

	* tools/nut-scanner/scan_snmp.c, tools/nut-snmpinfo.py: Fix nutscan
	  snmp  (cherry picked from commit
	  bc5a6c218e21c0af454007e2929c084129b6f3ed)
	* drivers/apc-ats-mib.c: Issue correction no pointer null at
	  beginning of the SNMP IDs device table  (cherry picked from commit
	  9d167892a36bf75d30839e7d4d6b53f037751666)

2020-04-28  Arnaud Quette <Arnaud.Quette@free.fr>

	* drivers/huawei-mib.c: Huawei MIB: add a counter check OID  This
	  avoids getting a false result when trying all OIDs, due to the use
	  of Net SNMP sysOID (.1.3.6.1.4.1.8072.3.2.10), found in various
	  implementations

2016-05-25  Jim Klimov <jim@jimklimov.com>

	* drivers/huawei-mib.c: huawei-mib - renamed lookups to have
	  "huawei_*" prefix  (cherry picked from commit
	  fd29f32b2837588518ec7bea07f414c2631d5c8f)

2020-04-21  Jim Klimov <jim@jimklimov.com>

	* scripts/augeas/nutupsdconf.aug.in: nutupsdconf.aug.in: complete the
	  ALLOW_NO_DEVICE definition
	* conf/nut.conf.sample, conf/upsd.conf.sample,
	  docs/man/upsd.conf.txt, scripts/augeas/nutupsdconf.aug.in,
	  scripts/augeas/tests/test_nut.aug, server/conf.c, server/upsd.c,
	  server/upsd.h: Rename NUT_NOCONF_ALLOWED to ALLOW_NO_DEVICE as
	  suggested in PR comments
	* conf/nut.conf.sample: nut.conf.sample: update the comment about
	  NUT_NOCONF_ALLOWED
	* server/upsd.c: upsd.c : CONST char* temp "envvar" as we do not
	  change the string later

2020-04-17  Jim Klimov <jim@jimklimov.com>

	* conf/upsd.conf.sample, docs/man/upsd.conf.txt: Re-spell "Boolean"
	  to satisfy spell-checker
	* conf/upsd.conf.sample, docs/man/upsd.conf.txt,
	  scripts/augeas/nutupsdconf.aug.in,
	  scripts/augeas/tests/test_nut.aug, server/conf.c, server/upsd.c,
	  server/upsd.h: Allow to configure NUT_NOCONF_ALLOWED option via
	  upsd.conf

2020-04-17  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-ats16-mib.c, drivers/eaton-ats16-mib.h, drivers/snmp-
	  ups.c: snmp-ups: add Eaton ATS16 with new Network-M2  Add support
	  for Eaton ATS16 using the new Network-M2 communication cards, and
	  including a fixed sysOID fingerprint

2020-04-03  Jim Klimov <jim@jimklimov.com>

	* clients/nutclient.cpp: clients/nutclient.cpp: sanity-check
	  getDevicesVariableValues() called with empty device list

2020-03-14  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict : fixes for NUT_NOCONF_ALLOWED addition
	* scripts/systemd/nut-driver-enumerator.service.in,
	  scripts/systemd/nut-driver@.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in: SystemD
	  service units: source EnvironmentFile=...nut.conf if available
	* conf/nut.conf.sample: nut.conf.sample : prepare an uncommentable
	  line for NUT_NOCONF_ALLOWED=true
	* server/upsd.c: server/upsd.c: introduce support for envvar
	  NUT_NOCONF_ALLOWED=true to allow starting with 0 ups.conf sections

2018-09-19  Arnaud Quette <ArnaudQuette@Eaton.com>

	* server/upsd.c: upsd should return EXIT_FAILURE when -c failed

2020-02-19  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in: when autostarting/reloading upsd (nut-server), do
	  it for previously "failed" unit too
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in: do systemctl daemon-reload between editing a unit
	  definition and auto-starting it

2018-12-18  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : centralize management of TIMEOUT_CMD and
	  TIMEOUT_ARGS, and use it for driver stop/start - it hangs too
	  sometimes

2020-02-09  Laurent Bigonville <bigon@users.noreply.github.com>

	* scripts/python/app/nut-monitor.appdata.xml, scripts/python/app/nut-
	  monitor.desktop: Update the appdata file to the latest version of
	  the specification (#727)  * nut-monitor: Update the appdata file to
	  the latest version of the specification  Fixes: #724  * nut-
	  monitor: Update the desktop file to follow the last version of the
	  sepcification

2020-02-09  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/documentation.txt, docs/nut.dict,
	  docs/solaris-usb.txt, scripts/Solaris/README: Add docs/solaris-
	  usb.txt for posterity (#755)

2020-01-08  Fernando Chaves <38504809+fernandolcx@users.noreply.github.com>

	* drivers/apcupsd-ups.h: apcupsd-ups: add real power and current
	  variables  LOAD_W => ups.realpower LOADAPNT => power.percent
	  OUTCURNT => `output.current` LOAD_VA => `ups.power` NOMAPNT =>
	  `ups.power.nominal`  Closes:
	  https://github.com/networkupstools/nut/pull/753

2019-11-06  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Add PowerWalker VFI 1000 CG PF1  Closes:
	  https://github.com/networkupstools/nut/issues/648

2019-09-18  andrewmccartney <andrew.mccartney@ametek.com>

	* drivers/Makefile.am, drivers/libusb.c, drivers/powervar-hid.c,
	  drivers/powervar-hid.h, drivers/usbhid-ups.c: Changes to add
	  support for Powervar UPM as usb-hid UPS. Includes adding a report
	  index to libusb.c in order to handle the composite device in the
	  UPM.

2019-09-12  Andrew Anderson <andrew@lirn.net>

	* drivers/pijuice.c: Conditionally include linux/i2c.h  Check for
	  I2C_FUNC_I2C to avoid errors caused by conflicts between
	  linux/i2c-dev.h and linux/i2c.h
	* configure.ac, drivers/pijuice.c: Add more granular I2C support
	  checks  Accommodate one more variation of SMBUS/I2C support  where
	  both the headers and the libraries exist and are usable.
	* drivers/pijuice.c: Pull over the latest development version  Clean
	  up the upsdebugX() labels Pull the conditional I2C support code
	  closer to the includes block Don't report battery temp as UPS temp
	  Warn if we adjust shutdown_delay
	* drivers/pijuice.c: Fix the length passed into memset()
	* drivers/asem.c: Add pijuice I2C driver for PiJuice HAT 4/4  Update
	  asem.c to complie cleanly by adding an include for <sys/ioctl.h>
	* configure.ac: Add pijuice I2C driver for PiJuice HAT 3/4  Check for
	  both the i2c-tools 3.x and 4.x include files (i2c-dev.h/smbus.h)
	  and set flags accordingly.  Link with the i2c library file from
	  i2c-tools 4.x if it is available.
	* drivers/Makefile.am: Add pijuice I2C driver for PiJuice HAT 2/4
	  Update the driver Makefile.am to add pijuice driver to the
	  LINUX_I2C_DRIVERLIST
	* drivers/pijuice.c: Add pijuice I2C driver for PiJuice HAT 1/4  Add
	  pijuice driver

2019-09-02  Laurent Bigonville <bigon@bigon.be>

	* scripts/python/app/nut-monitor.desktop: nut-monitor: Drop the .png
	  extension for the Icon in the .desktop file

2019-08-18  Laurent Bigonville <bigon@bigon.be>

	* scripts/python/Makefile.am, scripts/python/app/icons/256x256/nut-
	  monitor.png, .../python/app/{ => icons/48x48}/nut-monitor.png,
	  scripts/python/app/icons/64x64/nut-monitor.png,
	  scripts/python/app/icons/scalable/nut-monitor.svg: nut-monitor: Add
	  scalable, 64x64 and 256x256 icon for nut-monitor  FTR, this icon
	  comes from gnome-icon-theme 2.28

2019-07-22  rpvelloso <rvelloso@gmail.com>

	* drivers/solis.c: solis: avoid index out of bounds  Since the
	  parameter taken by autonomy_calc() is used to index a couple of
	  arrays of 5 positions and the variable `im`, which is passed to
	  autonomy_calc(), can be equal to 4, blindly incrementing it by one,
	  when it's 4, leads to an index out of bounds.

2019-07-30  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_siemens_sitop.c: nutdrv_siemens_sitop: move to the
	  new "battery.charge.approx" var
	* data/cmdvartab, docs/nut-names.txt: Add and document a new
	  "battery.charge.approx" var

2019-07-12  Spencer Shimko <spencer@quarksecurity.com>

	* drivers/tripplite_usb.c: Report load for Tripp Lite USB 3005
	  protocol  The debug output for a device using the Tripp Lite 09ae
	  3005 protocol seems to show that the ups.debug.L is the load as
	  noted on mailing list posts. Decode it and report it as ups.load.
	  Tested on TRIPP LITE SMART500RT1U.

2019-07-11  Jim Klimov <jim@jimklimov.com>

	* scripts/Solaris/nut-driver.xml.in: Solaris/nut-driver.xml.in :
	  constrain the impact of managing SMF instances for missing devices
	* scripts/systemd/nut-driver@.service.in: nut-driver@.service.in :
	  fix back templated @SBINDIR@
	* scripts/systemd/nut-driver@.service.in: Problem: Attempts to start
	  a nut-driver@bogusname actually run upsdrvctl on everything
	  Solution: First check if service instance name is valid, then use
	  it Should fix https://github.com/42ity/nut/issues/87

2019-07-10  Laurent Bigonville <bigon@bigon.be>

	* clients/Makefile.am, tools/nut-scanner/Makefile.am: libupsclient,
	  libnutscan: Only export symbols part of the public API  Fixes: #713

2019-07-09  Laurent Bigonville <bigon@bigon.be>

	* clients/upsclient.c, clients/upsmon.c, drivers/apcsmart.c,
	  drivers/bcmxcp.h, drivers/bestuferrups.c, drivers/main.c,
	  drivers/masterguard.c, drivers/metasys.c, drivers/mge-hid.c,
	  drivers/mge-mib.c, drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_q1.h,
	  drivers/optiups.c, drivers/solis.c, scripts/python/app/NUT-Monitor,
	  tools/nut-scanner/nut-scanner.c: Fix several typos
	* configure.ac, lib/libupsclient.pc.in, m4/nut_check_libnss.m4,
	  m4/nut_check_libopenssl.m4: Use pkg-config module names instead of
	  listing the libraries  Fixes: #709

2019-07-02  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : BUILD_64 not detected in some distros,
	  needs stdint.h

2018-05-04  Matthijs ten Berge <m.tenberge@awl.nl>

	* docs/man/nutdrv_siemens_sitop.txt: Spelling fix
	* drivers/nutdrv_siemens_sitop.c: Remove %-sign from variable values
	* drivers/nutdrv_siemens_sitop.c: Fix line endings
	* docs/man/nutdrv_siemens_sitop.txt: Better explanation of serial
	  port polling

2018-04-11  Matthijs ten Berge <m.tenberge@awl.nl>

	* data/driver.list.in, docs/man/Makefile.am, docs/man/{siemens-
	  sitop.txt => nutdrv_siemens_sitop.txt}, drivers/Makefile.am,
	  drivers/{siemens-sitop.c => nutdrv_siemens_sitop.c}: Rename driver
	  siemens-sitop to nutdrv_siemens_sitop  As requested in https://gith
	  ub.com/networkupstools/nut/pull/545#pullrequestreview-106712942

2018-03-26  Matthijs ten Berge <m.tenberge@awl.nl>

	* drivers/siemens-sitop.c: Various code improvements after review  -
	  The number of delimiter characters is no longer hard-coded, but
	  will be detected and thrown away at runtime - Discard any remains
	  in the RX buffer after communication errors - collapse repeating
	  code - upsdrv_shutdown now uses instcmd (removes duplicate code) -
	  obsolete ups.* variables removed - poll_interval not hard-coded,
	  but give a warning when a large value is encountered - option
	  parsing improved
	* docs/man/siemens-sitop.txt: Improve manpage layout

2018-03-23  Matthijs ten Berge <m.tenberge@awl.nl>

	* docs/man/siemens-sitop.txt, docs/nut.dict: Spellcheck fixes
	* data/driver.list.in, docs/man/Makefile.am, docs/man/siemens-
	  sitop.txt, drivers/Makefile.am, drivers/siemens-sitop.c: Initial
	  commit of siemens-sitop: driver for Siemens SITOP UPS500-series
	  UPSes

2019-04-26  William Chase <wchome@freet.org>

	* drivers/bestfcom.c: Fix for Ferrups FE7000 "off" command (#692)
	  "off" command for FE7000 required at least 5 seconds for the
	  command to be accepted.  Also should match the off with autostart
	  or "o" with "a" to be consistent with the manual:
	  https://www.eaton.com/content/dam/eaton/products/backup-power-ups-
	  surge-it-power-distribution/backup-power-ups/eaton-ferrups-tower-
	  ups/eaton-ferrups-FE-QFE-userguide-.pdf  (o [time] a is how the
	  manual references the "short" command)

2019-04-16  Ross Williams <ross@ross-williams.net>

	* drivers/snmp-ups.c: snmp-ups: add ability to set TimeTicks
	  correctly (#687)  * snmp-ups: add ability to set TimeTicks
	  correctly  Driver had been setting read/write parameters as either
	  Integer or String, but OIDs that expect TimeTicks cannot be set
	  using an Integer.  snmp-ups already supported getting TimeTicks
	  correctly and had helper functions for setting TimeTicks, but logic
	  had not been implemented in su_setOID().  * Missing semicolon ;-(
	  * snmp-ups: use NUT's str_to_long() in su_setOID()  Safer
	  conversion from provided strings to instant command or read/write
	  value. Omitted default value if !SU_MODE_INSTCMD because it is not
	  possible for read/write variable functions to be called without a
	  value (unlike instant commands).

2019-04-11  Jim Klimov <jimklimov@gmail.com>

	* drivers/eaton-pdu-marlin-mib.c, drivers/snmp-ups.c: [DNMY] Fix snmp
	  templates (#681)  * eaton-pdu-marlin-mib.c : move "outlet.count"
	  query higher  * snmp-ups.c : anticipate lack of OIDs in templates

2019-04-05  Jim Klimov <jimklimov@gmail.com>

	* .travis.yml, Makefile.am, ci_build.sh: Introduce shell script
	  syntax checks (#675)  * Introduce shell script syntax checks  *
	  Makefile.am : do not shellcheck/spellcheck by default as it can
	  fail for external circumstances (e.g. missing tools)  * Makefile.am
	  : visibly separate the "check-scripts-syntax" implementation (with
	  current system shells) vs "shellcheck" which may get impemented
	  differently (with external tools) in later iterations  *
	  Makefile.am : update the check-scripts-syntax comment (clarify
	  text, fix typo)  * Makefile.am : clarify the check-scripts-syntax
	  vs shellcheck comment  * .travis.yml and ci_build.sh : leave TBDs
	  for future shellcheck tool integration  * ci_build.sh : call both
	  shellcheck and check-scripts-syntax targets; it does not duplicate
	  the work and reports while one calls another for now - and will do
	  two tests when they become independent
	* configure.ac: configure.ac : fix mismatched usage of have_cxx11
	  envvar (#689)
	* server/conf.c: Problem: isdigit() receives a char* instead of char
	  (#690)  Solution: as a quick fix, pick the first char of the string
	  we pass. The proper fix would be to use the str_*() API for safe
	  conversions, in a later iteration.  See-also:
	  https://github.com/networkupstools/nut/issues/676

2019-04-01  Jim Klimov <jimklimov@gmail.com>

	* include/common.h: common.h : use the common do/while idiom for
	  macro with if clause

2019-04-01  Jim Klimov <jim@jimklimov.com>

	* common/common.c, include/common.h: Problem: upsdebug*() pass data
	  and allocate vars always  Solution: wrap old well-known API
	  routines into macros that check debugging level first, and only
	  invest into calling routines and passing data later - if that would
	  not be in vain.

2019-03-25  Jean-Baptiste Boric <boricj@users.noreply.github.com>

	* tools/nut-scanner/scan_snmp.c: Fix nut-scanner SNMPv3 (#680)

2019-03-19  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/compaq-mib.c, drivers/eaton-ats16-mib.c, drivers/eaton-pdu-
	  marlin-mib.c, drivers/hpe-pdu-mib.c, drivers/netxml-ups.c,
	  drivers/powerware-mib.c: Refresh firmware information for Eaton/HPE
	  devices  Despite the static nature of these data, firmware can be
	  updated by various means, and should thus be refreshed by the
	  driver, without needing a driver restart. A "semi static" approach
	  should be done in the end, as in usbhid-ups, but is not part of the
	  present development, though commented in the code. For the time
	  being, simply remove the STATIC flags to refresh the data (snmp-
	  ups) and allow to refresh product information (netxml-ups)

2019-03-19  Jean-Baptiste Boric <boricj@users.noreply.github.com>

	* tools/nut-scanner/scan_snmp.c: Fix SNMPv3 in nut-scanner (#679)

2019-03-15  Arjen de Korte <build+github@de-korte.org>

	* clients/upsclient.c, clients/upssched.c,
	  m4/nut_check_libopenssl.m4, server/netssl.c: Add support for
	  openssl-1.1.0 (#504)  * Add support for openssl-1.1.0  * Allow
	  TLSv1 and higher (not just TLSv1)  * Fix check for empty string  *
	  Report TLS handshake in debug mode  * Update
	  nut_check_libopenssl.m4  * Update upsclient.c  * Update netssl.c

2019-03-14  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/nutupsdrv.txt, docs/man/ups.conf.txt: nutupsdrv: reword
	  "user" directive section  Closes:
	  https://github.com/networkupstools/nut/issues/336 Closes:
	  https://github.com/networkupstools/nut/issues/671

2019-03-11  Arnaud Quette <arnaud.quette@free.fr>

	* docs/new-clients.txt: libnutclient: add comments to the code sample

2019-03-11  Jean-Baptiste Boric <boricj@users.noreply.github.com>

	* clients/nutclient.cpp, clients/nutclient.h, docs/new-clients.txt,
	  docs/nut.dict: Implement tracking commands in libnutclient (#673)
	  * Implement tracking commands in libnutclient   * Add
	  TrackingResult::INVALID_ARGUMENT

2019-02-26  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/solis.c: Fix regression in solis authors list

2019-02-26  Roberto Panerai Velloso <rvelloso@gmail.com>

	* drivers/solis.c, drivers/solis.h: Added author info for previous
	  merge https://github.com/networkupstools/nut/pull/511 (#672)  *
	  added author information

2019-02-26  Arnaud Quette <arnaud.quette@free.fr>

	* clients/Makefile.am, clients/upsclient.c, clients/upsclient.h,
	  clients/upscmd.c, clients/upsrw.c, common/snprintf.c,
	  conf/upsd.conf.sample, docs/man/Makefile.am,
	  docs/man/upscli_cleanup.txt, docs/man/upscli_readline.txt,
	  docs/man/upscli_sendline.txt, docs/man/upscmd.txt,
	  docs/man/upsd.conf.txt, docs/man/upsrw.txt, docs/net-protocol.txt,
	  docs/nut-names.txt, docs/nut.dict, docs/sock-protocol.txt,
	  drivers/dstate.c, drivers/upshandler.h, include/common.h,
	  scripts/augeas/nutupsdconf.aug.in,
	  scripts/augeas/tests/test_nut.aug, server/conf.c, server/netget.c,
	  server/netinstcmd.c, server/netset.c, server/nut_ctype.h,
	  server/sstate.c, server/upsd.c, server/upsd.h, tools/nut-
	  scanner/nut-scanner.c: INSTCMD and SET VAR status tracking
	  implementation  (#659)  * INSTCMD and SET VAR status tracking
	  implementation  This commit implements the instant commands
	  (instcmd) and variables settings (setvar) status tracking, to get
	  the actual execution status from the driver   * Missing Revision
	  history   * Fix nut-names.txt modification that should not be here
	  * Augeas support: add CMDSETSTATUSDELAY for upsd.conf   * INSTCMD
	  and SET VAR status tracking completion  Following Daniele Pezzini
	  thorough review, sanitize and improve the code, and also complete
	  documentation   * INSTCMD and SET VAR status tracking completion
	  implement support for status tracking in upscmd and upsrw   *
	  upscmd/upsrw: delay retries for status tracking   * Remove comment
	  There is no need to condition CMDSET_STATUS commands received by
	  upsd from the driver, on cmdset_status_enabled, since what matters
	  is the presence of a list and id   * Complete comment   * UUID v4
	  implementation  replaced the initial rxi/uuid4 library used by a
	  cross platform version. Though more basic, it is enough for our
	  needs, at least for now   * status_info should be static   * No
	  need for else, since fatalx is called before   * Suppress \n from
	  debug output   * Group sanity checks   * Get rid of dynamic memory
	  allocation   * Improve and enforce the use of UUID4_LEN   * Comment
	  on the size of dest for nut_uuid_v4()   * Move structures and
	  defines to more appropriate places   * Add functions with timeout
	  Add upscli_sendline_timeout and upscli_readline_timeout, beside
	  from the classic blocking versions. Also make a common define for
	  timeout, and use it in upsclient and nut-scanner   * upscmd/upsrw:
	  add a timeout option   * Basic homebrew UUID v4 implementation   *
	  Prefer to use static buffer for UUID   * log actual result of
	  instcmd / setvar   * Fix tracking ID reporting due to static memory
	  changes   * upsclient: use unsigned int for timeouts  Also,
	  explicit that upscli_cleanup() takes no argument.  * upscmd/upsrw:
	  use unsigned int for timeout + our str_to_uint() for it  Also,
	  slightly reword the help message for `-t` (timeout) option, in
	  order to clarify which is the unit (seconds) used for the provided
	  value.  * upscmd/upsrw: don't sleep after receiving a non-PENDING
	  CMDSET_STATUS  Also, remove some nesting in do_cmd() and do_set().
	  * net-protocol: clarify the format of GET CMDSET_STATUS +
	  <status_id>  <status_id> is not optional to get the status of a
	  command/setvar with CMDSET_STATUS, so drop the [square brackets]
	  from it. Also drop "quotes" in SET CMDSET_STATUS's <value>, since
	  it's expected to be a single word.  Plus, fix markup of INSTMCD's
	  <cmdparam> parameter.  * sock-protocol: align case and markup of
	  command parameters  * dstate: fix handling of INSTCMD's optional
	  parameters  We should still support the old `INSTCMD <cmdname>
	  [<cmdparam>]` format, and not only consider <cmdparam> when also
	  `STATUS_ID <id>` is provided.  Also, fix the format of our sock-
	  protocol commands mentioned in comments, and add function names to
	  debug info.  * common: document the recently added things  * upsd:
	  in INSTCMD/SET handlers, also accept NULL for status_id  Plus: -
	  use a simpler approach to test if status_id is not empty, - align
	  the way the SET command is built to the one used for the INSTCMD
	  command.  * upsd: drop unnecessary/unused global  * upsd: move
	  sanity checks of cmdset_status_get() after declaration of vars
	  Also, drop some nesting in that function.  * Move from
	  CMDSET_STATUS / STATUS_ID to TRACKING  This is just a big, big
	  rename, no code changes.  * upsd: refine the tracking API  Add a
	  couple of functions to change in a predictable way the value of the
	  general enablement of tracking and make it visible only inside
	  upsd.c. Also, move the tracking type (tracking_t) and the list of
	  items inside upsd.c.  * net-protocol: also return TRACKING between
	  OK and <id>, for INSTCMD/SET VAR  * dstate: *really* fix handling
	  of INSTCMD's optional parameters  Erroring out on `INSTCMD
	  <cmdname>` doesn't seem like a good idea...  * common: massage
	  default timeouts  Rename the default timeout used in network
	  operations by upsclient and nut-scanner to be more specific: from
	  DEFAULT_TIMEOUT to DEFAULT_NETWORK_TIMEOUT. Plus, make the default
	  timeout used when retrieving the result of an INSTCMD/SET VAR with
	  TRACKING enabled a common #define'd value
	  (DEFAULT_TRACKING_TIMEOUT), and use it also to publish the default
	  value of the -t option in the help messages of upscmd and upsrw.
	  As suggested by Charles Lepple.  * upsd: ignore case of UUID4 in
	  tracking API  Also, remove some nesting in tracking_del().  *
	  libupsclient: generate manpages for
	  upscli_{read,send}line_timeout()  To keep things simple, at least
	  for now, only generate manpages and not html pages (and, as such,
	  don't even think of using our linkman AsciiDoc macro with those
	  functions, to avoid dead links).  * libupsclient: bump version as
	  per recent changes  - addition of upscli_{read,send}line_timeout(),
	  - upscli_cleanup() -> upcli_cleanup(void)  Note: only increase
	  'current' and not 'age', because the upscli_cleanup() change could
	  (potentially) make it not compatible with previous versions.  *
	  upscmd/upsrw: warn that also the drivers need to support TRACKING,
	  for -w  * Fix typo and spelling   * Add check around atoi()
	  conversion

2019-02-25  Roberto Panerai Velloso <rvelloso@gmail.com>

	* drivers/solis.c, drivers/solis.h: solis: various improvements and
	  fixes  - fixed two memory leaks (unnecessary strdup's), - removed
	  ser_flush calls that were causing the driver to desync, -
	  refactored code, mostly bit mainpulation functions, - other minor
	  improvements in source code.

2019-02-23  Jim Klimov <jim@jimklimov.com>

	* clients/Makefile.am: clients/Makefile.am : also consider HAVE_CXX11
	  for .la target
	* tests/Makefile.am: tests/Makefile.am : explicitly consider
	  HAVE_CXX11
	* clients/Makefile.am, tests/Makefile.am: tests, clients Makefiles :
	  consider HAVE_CXX11
	* configure.ac: configure.ac : expose HAVE_CXX11 into automake
	* configure.ac: configure.ac : add C++0X as draft C++11 support
	  detection (older GCC on some systems)
	* configure.ac: configure.ac : refactor C++11 detection for
	  readability
	* configure.ac: Problem: OpenBSD mktemp complains on short pattern
	  Solution: bump from XXXXX to XXXXXXX which did not complain in
	  another part of the configure script

2019-02-20  Jim Klimov <jim@jimklimov.com>

	* clients/Makefile.am, tools/nut-scanner/Makefile.am: nut-scanner and
	  clients Makefile.am : comments about version-information

2019-02-16  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict : add words for upsdrvsvcctl doc

2019-02-08  Jim Klimov <jim@jimklimov.com>

	* common/common.c: Problem: 32-bit builds fail to load 64-bit libs
	  Solution: Do our best to guess the bitness of a build, and use it
	  in search paths for get_libname()

2019-02-03  Daniele Pezzini <hyouko@gmail.com>

	* server/upsd.c: upsd: fix the calling of netcmds items' func()
	  Since, as per our network protocol, it's perfectly legal to have
	  single-word commands (and we already have a few, e.g. VER, NETVER,
	  HELP, ...), we do not do an early check to ensure that at least one
	  argument was provided to the command. As such, the list of words
	  generated by parseconf could actually end with the command itself.
	  That said, trying to access something that should not be there
	  doesn't seem like a good idea, so, only pass to netcmds items'
	  func() the list of arguments (which starts at the second item of
	  the list of words), if there are arguments, otherwise just pass
	  NULL.
	* server/sstate.c: sstate: make sure ADDRANGE/DELRANGE have all the
	  needed parameters  Since ADDRANGE and DELRANGE take 3 arguments
	  (<varname>, <minvalue>, <maxvalue>), we have to ensure all of them
	  were provided, before attempting to use them.
	* drivers/dstate.c: dstate: fix dstate_delrange() socket protocol
	  command  The documented (and used in server-side) command for
	  deleting a range is `DELRANGE <varname> <minvalue> <maxvalue>`, not
	  `DELRANGE <varname> "<minvalue> <maxvalue>"`, as used in
	  dstate_delrange(). So, fix that unused (well, at least in NUT)
	  function to use the correct format.  Also, remove an extraneous
	  additional space in the command used in dstate_addrange().

2019-02-01  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, scripts/augeas/Makefile.am: Augeas support: execute
	  lenses tests if possible  This is however disabled for now, while
	  waiting to fix the reported issue  Ref:
	  https://github.com/networkupstools/nut/issues/657
	* configure.ac: Fix wording that breaks some syntax highlighting
	  systems
	* docs/nut-names.txt: Add the missing delayed versions of some
	  commands

2019-01-30  Jean-Baptiste Boric <boricj@users.noreply.github.com>

	* clients/nutclient.cpp, clients/nutclient.h: libnutclient: introduce
	  getDevicesVariableValues() (#654)  A performance bottleneck was
	  identified within the 42ity project, where querying all variable
	  values from 300 ePDUs through upsd and libnutclient took 15 seconds
	  to complete. The new method TcpClient::getDevicesVariableValues()
	  allows querying device variable values in bulk, by sending all LIST
	  VAR commands ahead of time and then parsing all the results at
	  once. Throughput is vastly improved, with the mega-query completing
	  about 15 times faster.

2019-01-28  Arnaud Quette <arnaud.quette@free.fr>

	* clients/Makefile.am, clients/nutclient.h: libnutclient: fix version
	  and interface  * Library version should be updated to reflect
	  changes, and is now 1:0:0 * Interface should be adapted so that the
	  additional argument to instant commands can be optional
	* drivers/eaton-pdu-marlin-mib.c, drivers/hpe-pdu-mib.c: snmp-ups:
	  support extra param for instcmd (Eaton/HPE)  Add support for extra
	  parameter for instant commands on Eaton and HPE ePDU
	* drivers/snmp-ups.c: snmp-ups: fix potential segfault  when using
	  delayed instant commands, with a NULL default value, and not
	  providing a value, the driver can segfault
	* docs/nut.dict: Fix spellcheck
	* clients/nutclient.cpp, clients/nutclient.h, docs/net-protocol.txt:
	  Add support for extra parameter for instant commands  Instant
	  commands were almost ready for supporting additional parameter.
	  However, it was not documented, and libnutclient was not supporting
	  it yet

2019-01-24  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apc-ats-mib.c, drivers/apc-mib.c, drivers/apc-pdu-mib.c,
	  drivers/baytech-mib.c, drivers/bestpower-mib.c, drivers/compaq-
	  mib.c, drivers/cyberpower-mib.c, drivers/eaton-ats16-mib.c,
	  drivers/eaton-ats30-mib.c, drivers/eaton-pdu-genesis2-mib.c,
	  drivers/eaton-pdu-marlin-mib.c, drivers/eaton-pdu-pulizzi-mib.c,
	  drivers/eaton-pdu-revelation-mib.c, drivers/emerson-avocent-pdu-
	  mib.c, drivers/hpe-pdu-mib.c, drivers/ietf-mib.c, drivers/mge-
	  mib.c, drivers/netvision-mib.c, drivers/powerware-mib.c,
	  drivers/raritan-pdu-mib.c, drivers/raritan-px2-mib.c, drivers/snmp-
	  ups.c, drivers/snmp-ups.h, scripts/subdriver/gen-snmp-subdriver.sh:
	  snmp-ups: Rework instant commands handling  Use snmp_info_t->dfl,
	  which is a char*, instead of snmp_info_t->info_len for instant
	  commands default value. This allows to distinguish between commands
	  that do not require a mandatory value. For instcmd requiring a
	  parameter (such as *.delay), a NULL snmp_info_t->dfl and no
	  extradata will result in STAT_INSTCMD_INVALID value returned  Also
	  adapt subdrivers and gen-snmp-subdriver.sh to match this
	* drivers/delta_ups-mib.c, drivers/eaton-pdu-marlin-mib.c,
	  drivers/huawei-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h,
	  drivers/xppc-mib.c, scripts/subdriver/gen-snmp-subdriver.sh: snmp-
	  ups: Simplify the mapping structure  * snmp_info_t->setvar is not
	  used anymore, so drop it, * hence, also delete flag SU_FLAG_SETINT
	  and references to it, * adapt subdrivers and gen-snmp-subdriver.sh
	  to match this

2019-01-23  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: Fix warnings (memset-elt-
	  size/pointer-sign)
	* drivers/snmp-ups.c: snmp-ups: Actually fix commands offset (off by
	  1)  The last fix was wrongly setting the offset to negative, and
	  substracting it again from the current device number, which
	  resulted in an addition, not a substraction
	* drivers/mge-hid.c, drivers/usbhid-ups.c: usbhid-ups / MGE: bump
	  versions to reflect changes

2019-01-22  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c, drivers/usbhid-ups.c, drivers/usbhid-ups.h:
	  usbhid-ups: Fix erroneous OB report on Eaton UPS  Also created a
	  read accessor on status bits and move the related definitions to
	  the driver header

2019-01-22  Jean-Baptiste Boric <boricj@users.noreply.github.com>

	* drivers/mge-xml.c, drivers/netxml-ups.c, drivers/netxml-ups.h:
	  netxml-ups: Report calibration status (#650)

2019-01-22  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/Makefile.am, drivers/hpe-pdu-mib.c,
	  drivers/hpe-pdu-mib.h, drivers/snmp-ups.c: snmp-ups: Add support
	  for HPE ePDU

2019-01-21  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: Improve ALARM flag handling

2019-01-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: Fix ALARM flag on non-daisychained
	  devices
	* drivers/snmp-ups.c: snmp-ups: Fix erroneous integration of hpe_pdu
	* drivers/snmp-ups.c: snmp-ups: Fix commands offset (off by 1)
	* drivers/snmp-ups.c: snmp-ups: Fix detection and display of hex
	  strings

2019-01-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/compaq-mib.c: snmp-ups: Add firmware version for new
	  Network card  Also bump HPE/Compaq subdriver version to 1.62

2018-12-04  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh : note to not skip full "main" evaluation in daemon
	  mode
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh : support SIGHUP causing a quick reconfig when
	  received both during the sleep and processing in-progress
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh : avoid continuous reconfiguration (esp. in daemon
	  mode)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : for many discovered changes, avoid the lag of
	  running systemctl daemon-reload for every item in the loop
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : in single-run, daemon and full-reconfig modes,
	  take note if the config file had changed while we were running -
	  re-sync services vs sections ASAP then
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : introduce calc_md5_file() and comment calc_md5()
	  a bit better

2018-12-07  Scott Shambarger <devel@shambarger.net>

	* clients/upsmon.c, clients/upssched.c, common/parseconf.c: Add
	  FD_CLOEXEC flag to config files, pipes and sockets  File
	  descriptors are leaking to processes spawned by upsmod and
	  upssched, leading to SELinux errors when (for example) sendmail
	  attempts to read from fd #4.

2018-12-01  mjan <mjmail@correo.casa.loc>

	* drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_hunnox.c, drivers/nutdrv_qx_hunnox.h: Add support
	  for Hunnox HNX-850

2018-11-19  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : critical typo fix (Environment is valid in
	  section Service, not Unit)

2018-11-16  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : refactor upsconf_getSection_content() to have
	  one place of logic to add the parsed section line
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test--ups.conf, tests/nut-driver-enumerator-test.sh:
	  nut-driver-enumerator.sh.in : section-name brackets should contain
	  a single token and not be inside another string
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : refactor upslist_normalizeFile_filter() into a
	  more readable standalone routine

2018-11-13  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : update the list of config factors that mean an
	  USB nutdrv_qx device
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test.sh: nut-driver-enumerator-test.sh / nut-driver-
	  enumerator-test--ups.conf / nut-driver-enumerator.sh.in : extend
	  upsconf_getValue() to query for several values in the same call to
	  more efficiently check if any key/flag is set
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test--ups.conf, tests/nut-driver-enumerator-test.sh:
	  nut-driver-enumerator-test.sh / nut-driver-enumerator-test--
	  ups.conf / nut-driver-enumerator.sh.in : do not ignore driver flags
	  followed by a comment
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : fix \t into TABCHAR
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : show the expected vs actual diff in any shell interpreter
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : add a disclaimer about config parser (probable
	  non-)conformity to NUT binary definitions
	* tests/nut-driver-enumerator-test--ups.conf: nut-driver-enumerator-
	  test--ups.conf : test a section with indented name
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test--ups.conf, tests/nut-driver-enumerator-test.sh:
	  nut-driver-enumerator-test.sh / nut-driver-enumerator-test--
	  ups.conf / nut-driver-enumerator.sh.in : in section-name lines,
	  ignore anything outside the first set of brackets
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : show a diff of expected vs actual, if the shell allows in-place
	  docs
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : suggest to a dev how to re-run the failed test verbosely

2018-11-05  Jim Klimov <jimklimov@gmail.com>

	* tools/Makefile.am, tools/nut-scanner/Makefile.am: tools/ Makefiles
	  : refactor with clarifications from DMF branch (#636)

2018-11-04  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : fix svcprop queries to base service level
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : consider "unknown" systemd unit state as one to
	  be restarted
	* scripts/upsdrvsvcctl/upsdrvsvcctl.in: upsdrvsvcctl.in : fix -D for
	  debugging level
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test--ups.conf, tests/nut-driver-enumerator-test.sh:
	  nut-driver-enumerator-test.sh / nut-driver-enumerator.sh.in :
	  support USB and Serial modes for nutdrv_qx
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : track changes of global config and restart
	  drivers and nut-server if that happened
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test.sh: nut-driver-enumerator-test.sh / nut-driver-
	  enumerator.sh.in : in upslist_debug() show also the global config
	  section
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in, tests/nut-driver-
	  enumerator-test--ups.conf, tests/nut-driver-enumerator-test.sh:
	  nut-driver-enumerator-test.sh / nut-driver-enumerator.sh.in :
	  support flag values (line is a single token)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : do not use an "other" section as a magic value
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : "break" the loop, not return from it (artefact
	  of moving code from a sub-shell)

2018-11-01  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh : Use a timeout to restart/reload nut-server
	  (systemd)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh : Do not restart/reload nut-server if not already
	  running (systemd)

2018-10-22  Robert W. Cashman <rob@cashmans.org>

	* drivers/cyberpower-mib.c: Added UPS load, battery charge, input
	  voltage/frequency, and output voltage, MIB mappings to cyberpower-
	  mib.c

2018-10-12  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml : move nut-driver-enumerator-test jobs
	  lower in stack - we want slow jobs to start first
	* .travis.yml: .travis.yml : matrix job seems to require having at
	  least two items

2018-10-11  Jim Klimov <jimklimov@gmail.com>

	* tests/nut-driver-enumerator-test.sh: Update nut-driver-enumerator-
	  test.sh  Standardize the testing setup

2018-10-11  Jim Klimov <jim@jimklimov.com>

	* builds/nut-driver-enumerator-test/ci_build.sh: builds/nut-driver-
	  enumerator-test/ci_build.sh : use the "selftest" dummy service
	  framework if systemd is not available in the testing OS environment
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : support a "selftest" dummy service framework
	* builds/nut-driver-enumerator-test/ci_build.sh: builds/nut-driver-
	  enumerator-test/ci_build.sh : let the tests have some
	  SERVICE_FRAMEWORK
	* tests/nut-driver-enumerator-test.sh: tests/nut-driver-enumerator-
	  test.sh : update envvar processing
	* builds/nut-driver-enumerator-test/ci_build.sh: builds/nut-driver-
	  enumerator-test/ci_build.sh : export BUILDDIR SRCDIR for the test
	  script
	* builds/nut-driver-enumerator-test/ci_build.sh: builds/nut-driver-
	  enumerator-test/ci_build.sh : debug the testing script itself
	* .travis.yml, builds/nut-driver-enumerator-test/ci_build.sh,
	  tests/nut-driver-enumerator-test.sh: Problem: nut-driver-enumerator
	  not Travised  Solution: Add call to its selftest

2018-10-10  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict : add components of --show-all-configs
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : echo if there is nothing to reconfigure (add
	  timestamp, do not spam in daemonized loop by default)
	* scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in:
	  Solaris preremove.in postinstall.in : pass the last-active nut-
	  driver-enumerator instance across package upgrades done over a
	  short timeframe
	* scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in:
	  Solaris preremove.in postinstall.in : less spam from "svcadm clear"
	  of not-failed services
	* scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in:
	  Solaris preremove.in postinstall.in : support the multi-instance
	  nut-driver-enumerator service now
	* tests/Makefile.am: tests/Makefile.am : EXTRA_DIST the new nut-
	  driver-enumerator-test script and config
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : echo if there is nothing to reconfigure (early
	  on or after the loop has done some changes)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : update comments regarding SMF service instance
	  wrapping
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : test for changed sections before testing for
	  changed set of section vs service names
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : small sanity check in
	  upslist_checksums_unchanged()
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : update comments regarding new support for
	  detection of changed device section contents
	* scripts/upsdrvsvcctl/upsdrvsvcctl.in: upsdrvsvcctl.in : SMF service
	  management should wait for completion, to be same as systemd
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : optimize loop work
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : basic support for detecting changes in ups.conf
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : commented a couple of FIXMEs illustrated by the test expected
	  data
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : call testcase_upslist_debug() last in the suite
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : store SECTION_CONTENT in a variable and spit it
	  out once
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : update tests for only trimming whitespace around first "="
	  character
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : refer to systemd unit via SVCINST not $1 when
	  registering
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : update comments
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : drop unneeded assignment in calc_md5()
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : in upslist_normalizeFile() only trim whitespace
	  around first "=" character (do not touch subsequent ones in value
	  part)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : optimize upsconf_getValue() since we use pre-
	  normalized data
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : add DEBUG=trace
	* tests/nut-driver-enumerator-test--ups.conf, tests/nut-driver-
	  enumerator-test.sh: nut-driver-enumerator-test.sh : add a test case
	  for dummy-ups proxying to a localhost "remote" device; add examples
	  of quoted key values with spaces

2018-10-09  Jim Klimov <jim@jimklimov.com>

	* tests/nut-driver-enumerator-test--ups.conf, tests/nut-driver-
	  enumerator-test.sh: nut-driver-enumerator-test.sh : add a test case
	  for querying global config pseudo-section
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : support getting global config values (when
	  device section value is empty)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : zsh not supported
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : add a test case for config value that was quoted
	* tests/nut-driver-enumerator-test.sh: nut-driver-enumerator-test.sh
	  : control values of section and device name checksums in
	  upsconf_debug()
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : expose section and device name checksums in
	  upsconf_debug()
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : introduce upsconf_getSection_MD5() to checksum
	  the normalized payload of a config section
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : in --reconfigure should exit() not return()
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : in systemd_validFullUnitName() add the .service
	  suffix if needed
	* tests/.gitignore, tests/nut-driver-enumerator-test--ups.conf,
	  tests/nut-driver-enumerator-test.sh: Introduce simple unit tests
	  for nut-driver-enumerator.sh
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : expose upsconf_debug() and upslist_debug() to
	  CLI
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : avoid direct exit during loop processing
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : use a variable SYSTEMD_CONFPATH
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : use UPSCONF_DATA_SDP and rearrange getSection()
	  routines for certain use-cases
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : use upslist_readFile_once() in command-line
	  tools to avoid re-parsing the config many times
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : use cached UPSCONF_DATA in upsconf_getSection()
	  rather than FS access every time
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : rearrange and document the initial slurping and
	  normalization of ups.conf, reducing the work done
	* docs/man/nut-driver-enumerator.txt, scripts/upsdrvsvcctl/nut-
	  driver-enumerator.sh.in, scripts/upsdrvsvcctl/upsdrvsvcctl.in: nut-
	  driver-enumerator.sh.in : add --show-configs to expose UPSCONF_DATA
	  with normalized content of ups.conf

2018-10-05  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/upsdrvsvcctl.in: upsdrvsvcctl.in : add
	  "reconf(igure)" call to pass into nut-driver-enumerator.sh
	* scripts/upsdrvsvcctl/upsdrvsvcctl.in: upsdrvsvcctl.in : update
	  usage()
	* docs/man/nut-driver-enumerator.txt, scripts/upsdrvsvcctl/nut-
	  driver-enumerator.sh.in: nut-driver-enumerator.txt : make
	  spellchecker happy
	* scripts/Solaris/postinstall.in: solaris postinstall :
	  REPORT_RESTART_42=no when reconfiguring
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : update message for reconfig dropping of old
	  service
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : fix fall-through daemonization for DASH
	* scripts/Solaris/README: Solaris README : update about two nut-
	  driver-enumerator instances
	* docs/man/nut-driver-enumerator.txt: nut-driver-enumerator.txt : add
	  recently introduced options into manpage
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : typo fix
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : typo fix
	* scripts/Solaris/nut-driver-enumerator.xml.in: nut-driver-
	  enumerator.xml.in : support daemonization into background (contract
	  service)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : support daemonization into background
	* scripts/Solaris/nut-driver-enumerator.xml.in: nut-driver-
	  enumerator.xml.in : typo fix
	* scripts/Solaris/nut-driver-enumerator.xml.in: nut-driver-
	  enumerator.xml.in : avoid creating default service twice
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : support SIGHUP for the daemon
	* scripts/Solaris/README, scripts/Solaris/nut-driver-
	  enumerator.xml.in: nut-driver-enumerator : use --daemon(=freq) in
	  Solaris SMF service, implement it as an option (two prepackaged
	  services, with and without loop)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator : add --daemon(=freq) to monitor ups.conf vs. services
	  changes ourselves in a loop
	* scripts/Solaris/postinstall.in: nut-driver-enumerator : use
	  --reconfigure to remake units from scratch in Solaris postinstall
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator : add --reconfigure to remake units from scratch

2018-10-04  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : for network-depending connections, wait for
	  ifplugd to set up physical network, if enabled
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : for network-depending connections, wait for DNS
	  resolver to appear
	* scripts/systemd/nut-driver-enumerator.service.in: nut-driver-
	  enumerator.service.in : do NOT remain active when done, allow nut-
	  driver-enumerator.path to start this again
	* scripts/Solaris/README: Solaris README : note that there is no
	  dynamic refresh when ups.conf is changed
	* scripts/Solaris/README: Solaris README : update reference to
	  upsdrvsvcctl directory
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : when removing a systemd instance, also remove
	  systemd complaints about it (if any)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : less ambiguity - manage ".service" instances as
	  such

2018-10-03  Jim Klimov <jimklimov@gmail.com>

	* common/common.c: get_libname() : support more 64-bit pathname
	  patterns (#609)

2018-09-08  Jim Klimov <jimklimov@gmail.com>

	* drivers/usbhid-ups.c: usbhid-ups.c : libusb/libshut tracing debug
	  text

2018-10-02  Jim Klimov <jim@jimklimov.com>

	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : in systemd use-case, fall back to rude restart
	  if reload-or-restart of nut-server stalled and failed

2018-09-28  Jim Klimov <jimklimov@gmail.com>

	* scripts/systemd/nutshutdown.in: Update nutshutdown.in  No strict
	  restrictions for fallback timeout

2018-09-27  Jim Klimov <jim@jimklimov.com>

	* scripts/Solaris/nut-server.xml.in, scripts/Solaris/svc-nut-
	  server.in, scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-
	  driver-enumerator.sh.in / nut-server.xml.in / svc-nut-server.in :
	  reload the running upsd instead of restarting it fully when
	  possible (Solaris SMF)
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : reload the running upsd instead of restarting it
	  fully when possible (Linux SystemD)

2018-09-26  Jim Klimov <jim@jimklimov.com>

	* scripts/systemd/nut-driver-enumerator.path.in: nut-driver-
	  enumerator.path.in : typo fix for CONFDIR => CONFPATH
	* docs/man/Makefile.am: docs/man/Makefile.am : handle other
	  nutclient*.3 manpages that are mass-implemented by some
	  libnutclient*.txt
	* scripts/systemd/nutshutdown.in: nutshutdown.in : fallback short
	  timeout if config is absent or not parsable
	* scripts/systemd/nutshutdown.in: nutshutdown.in : check that needed
	  programs exist first

2018-09-19  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : syntactic sugar
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time - reformatted
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time - also the values registered
	  with comm_driver structure
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time - reformatted
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time - also the values registered
	  with comm_driver structure
	* drivers/usbhid-ups.c: usbhid-ups.c : report the libusb version
	  involved in the driver at this time
	* tools/Makefile.am, tools/nut-scanner/Makefile.am: Update comments
	  in tools(/nut-scanner)/Makefile.am regarding new more proper
	  dependency definitions

2018-09-17  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: update support level of some Meta System
	  devices  As per the provided protocol: see nut-website's
	  66d30c90401ff7929b25e5a87f9299b728f861ea

2018-09-08  Jim Klimov <jim@jimklimov.com>

	* tools/Makefile.am: tools/Makefile.am : GENERATED_USB_FILES also
	  depend on nutdrv_qx.c
	* tools/Makefile.am: tools/Makefile.am : generalize
	  GENERATED_SNMP_FILES too for consistency
	* tools/Makefile.am: Makefile.am : fix back calling scripts from
	  distdir while being in builddir

2018-09-07  Jim Klimov <jimklimov@gmail.com>

	* tools/Makefile.am, tools/nut-snmpinfo.py, tools/nut-usbinfo.pl:
	  tools/nut-snmpinfo.py tools/nut-usbinfo.pl tools/Makefile : use
	  TOP_SRCDIR/TOP_BUILDDIR to pass with distcheck too

2018-09-08  Jim Klimov <jim@jimklimov.com>

	* scripts/Solaris/postinstall.in: Solaris/postinstall.in : clarify
	  tests for present vs non-empty config files
	* scripts/Solaris/postinstall.in, scripts/Solaris/postremove.in,
	  scripts/Solaris/preinstall.in, scripts/Solaris/preremove.in: Insert
	  or update header comments in Solaris pre/post-install/remove
	  scripts

2018-09-07  Jim Klimov <jimklimov@gmail.com>

	* tools/Makefile.am: tools/Makefile.am : update dependency on C
	  sources
	* Makefile.am: Makefile.am : "dist" drivers/*.c before tools (which
	  generates further files from that)
	* drivers/libusb0.c, drivers/libusb1.c: libusb0/1.c : ease debugging
	  by trace messages
	* drivers/libusb1.c: libusb1.c : inverted order of
	  usb_communication_subdriver_t name/ver fields
	* drivers/libusb0.c: libusb.c : inverted order of
	  usb_communication_subdriver_t name/ver fields
	* configure.ac: configure.ac  : syntactic sugar
	* drivers/libusb.c: libusb.c : inverted order of
	  usb_communication_subdriver_t name/ver fields
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : fix initial setup with 0 service instances
	  present
	* scripts/upsdrvsvcctl/nut-driver-enumerator.sh.in: nut-driver-
	  enumerator.sh.in : try to enable "nut-server" when restarting it
	* tools/Makefile.am: tools/Makefile.am : avoid rebuilding generated
	  files after "make dist" over and over
	* tools/nut-scanner/Makefile.am: tools/nut-scanner/Makefile.am :
	  structurally arrange built dependencies, reduce hardcoded
	  references to their names

2018-09-06  Jim Klimov <jimklimov@gmail.com>

	* drivers/libshut.c, drivers/libusb.c, drivers/usbhid-ups.c: libusb
	  tracing debug text

2018-09-06  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: add some Legrand devices supported by
	  nutdrv_qx  Also, specify that Legrand Multiplug is USB-only.
	* data/driver.list.in: HCL: update support level of some Meta System
	  devices  As per the provided protocol: see nut-website's
	  570c1e5e9f1fb4f82abef9359897b5159e88fc50 Also, fix name of "HF Line
	  /2".

2018-09-06  Gabriele Taormina <gabriele.taormina@legrand.com>

	* drivers/metasys.c: metasys: retrieve also battery charge and
	  runtime  The added command is only supported by devices with an 'id
	  code' >= 14, while for other, older, models the command is not
	  enabled by default, and the user has to perform a specific
	  procedure via serial to enable it (where supported).

2018-09-05  Daniele Pezzini <hyouko@gmail.com>

	* drivers/metasys.c: metasys: remove useless initialisation of vars

2018-08-27  Gabriele Taormina <gabriele.taormina@legrand.com>

	* data/driver.list.in, drivers/metasys.c: metasys: support some newer
	  Meta System and Legrand devices  Add to the metasys driver a few
	  new models (Meta System DHEA, and others now branded Legrand)
	  speaking the Meta System UPS protocol.
	* drivers/metasys.c: metasys: treat any '\0' in the serial number as
	  a '0'
	* drivers/metasys.c: metasys: for bypass mode, call status_set() with
	  "BYPASS", not "BY"
	* drivers/metasys.c: metasys: fix handling of errors/special values
	  As per protocol documentation, data is sent by the device with
	  unsigned integers of 8, 16 or 32 bits, with errors/special values
	  being: - for uint16: 0xFFFF and 0xFFFE, - for uint32: 0xFFFFFFFF.
	  Alas, those values are (and, probably, have always been) actually
	  reported in the documentation (mostly) as if their types were not
	  unsigned (so, in decimal: -1, and -2) and the metasys driver used
	  them like that, converting the values to non-fixed width signed
	  types (int and long) and then expecting a value of -1 or -2 to
	  signal a particular event, but this only happens on platforms where
	  int is exactly 16 bits, and long 32 bits. So, leave values as
	  unsigned types (adjusting all the printf formats accordingly), and
	  use the right hex values, instead.
	* data/driver.list.in, drivers/Makefile.am, drivers/legrand-hid.c,
	  drivers/legrand-hid.h, drivers/usbhid-ups.c: usbhid-ups: add
	  Legrand subdriver
	* data/driver.list.in, drivers/nutdrv_qx.c: nutdrv_qx: add support
	  for some Legrand USB devices

2018-08-29  Jim Klimov <jim@jimklimov.com>

	* scripts/systemd/Makefile.am: EXTRA_DIST scripts/systemd/nut.target
	  also

2018-08-21  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libneon.m4: nut_check_libneon.m4 : shell typo fix
	* m4/nut_check_libneon.m4: nut_check_libneon.m4 : do not AC_MSG_WARN
	  inside a standard message chain
	* m4/nut_check_libneon.m4: nut_check_libneon.m4 : provide fallback
	  defaults when pkg-config fails

2018-08-14  Jim Klimov <jim@jimklimov.com>

	* m4/nut_check_libneon.m4: nut_check_libneon.m4 : comment about
	  detecting without pkgconfig as a fallback
	* m4/nut_check_libavahi.m4: nut_check_libavahi.m4 : typo fix

2018-08-19  Daniele Pezzini <hyouko@gmail.com>

	* configure.ac: configure: fix messages of pkg-config checks  The
	  PKG_*() macros we use there already print messages, therefore we
	  can't use AC_MSG_CHECKING() before calling them, and
	  AC_MSG_RESULT() after, or we will get something like:  checking for
	  autoconf macro support of pkg-config... checking for pkg-config...
	  /usr/bin/pkg-config ^^^ AC_MSG_CHECKING()
	  ^^^ PKG_*() macro output checking pkg-config is at least version
	  0.9.0... yes ^^^ PKG_*() macro output -- continuation ok ^^^
	  AC_MSG_RESULT() checking for autoconf macro support of pkg-config
	  module checker... checking for dummy_PKG_CONFIG... yes ^^^
	  AC_MSG_CHECKING()                                               ^^^
	  PKG_*() macro output ok ^^^ AC_MSG_RESULT()  ...which is not
	  exactly desirable.  So, move the messages to AC_MSG_NOTICE(), with
	  the result being explicitly printed only on failure (AC_MSG_WARN()
	  call).
	* docs/man/Makefile.am: docs/man: fix man8 target for linux/i2c
	* docs/man/Makefile.am, drivers/Makefile.am: nutdrv_qx: don't
	  duplicate make targets  Since nutdrv_qx is both a serial and a USB
	  driver, up until now, its executable and manpages appeared in two
	  lists: serial and USB drivers, in order to be built in both cases,
	  when ./configure'd for only one of them... but, by doing this, when
	  ./configure'd for both, we ended up with dupes, which could
	  potentially cause problems, e.g. when installing them (and this
	  just happened).  For the executable, luckily, libtool calls install
	  one file at a time, so this was not, and it still should not be, a
	  problem. For the manpages, we were previously saved by automake,
	  which splits the list of files to be installed in different calls
	  if they are too many (see automake's am__install_max var, currently
	  set to 40), so the two nutdrv_qx entries ended up in different
	  calls to install, but the 8b75b03 commit, by adding more manpages
	  before nutdrv_qx's ones, pushed also the first occurrence to the
	  second call to install, which already contained the other one,
	  causing an error.  While other alternative, more flexible, but also
	  less portable, ways for solving this exist (e.g. using GNU make's
	  $(sort) on the generated lists), at least for now, prefer a more
	  portable solution, adding new intermediate lists for serial/USB
	  drivers and using simple automake conditionals.  Close
	  https://github.com/networkupstools/nut/issues/594

2018-08-14  Jim Klimov <jimklimov@gmail.com>

	* .gitignore, Makefile.am, README, common/Makefile.am, configure.ac,
	  docs/FAQ.txt, docs/config-notes.txt, docs/developers.txt,
	  docs/features.txt, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/nut-driver-enumerator.txt, docs/man/upsdrvctl.txt,
	  docs/man/upsdrvsvcctl.txt, docs/net-protocol.txt, docs/nut.dict,
	  include/Makefile.am, scripts/Aix/.gitignore, scripts/Aix/nut.init,
	  scripts/Aix/nut.init.in, scripts/Makefile.am,
	  scripts/Solaris/.gitignore, scripts/Solaris/Makefile.am,
	  scripts/Solaris/README, scripts/Solaris/makelocal.sh,
	  scripts/Solaris/nut-driver-enumerator.xml.in, scripts/Solaris/nut-
	  driver.xml.in, scripts/Solaris/nut-monitor.xml.in,
	  scripts/Solaris/nut-server.xml.in, scripts/Solaris/nut.in,
	  scripts/Solaris/nut.xml.in, scripts/Solaris/pkginfo.in,
	  scripts/Solaris/postinstall.in, scripts/Solaris/postremove,
	  scripts/Solaris/postremove.in, scripts/Solaris/preinstall,
	  scripts/Solaris/preinstall.in, scripts/Solaris/prepackage.py,
	  scripts/Solaris/{preproto.pl => preproto.pl.in},
	  scripts/Solaris/preremove.in, scripts/Solaris/svc-nut-monitor.in,
	  scripts/Solaris/svc-nut-server.in, scripts/systemd/.gitignore,
	  scripts/systemd/Makefile.am, scripts/systemd/README,
	  scripts/systemd/nut-driver-enumerator.path.in, scripts/systemd/nut-
	  driver-enumerator.service.in, scripts/systemd/nut-
	  driver.service.in, scripts/systemd/nut-driver.target,
	  scripts/systemd/nut-driver@.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in,
	  scripts/systemd/nut.target, scripts/systemd/nutshutdown.in,
	  scripts/upsdrvsvcctl/.gitignore, scripts/upsdrvsvcctl/Makefile.am,
	  scripts/upsdrvsvcctl/README, scripts/upsdrvsvcctl/nut-driver-
	  enumerator.sh.in, scripts/upsdrvsvcctl/upsdrvsvcctl.in: Use target
	  for drivers in Linux systemd (updated) and SMF instances for
	  drivers in new Solaris-like systems (and bring AIX initscript into
	  better shape) (#330)  * Use target for drivers in systemd  This
	  allows much better granularity and better monitoring in case of
	  multiple UPSes.  * nut-driver.target improvements suggested by
	  @peterhoeg in PR#229  * systemd units dependencies revised and
	  commented  * nut-driver-enumerator.sh initial commit  * nut-
	  driver@.service.in : integrate comments from @peterhoeg about
	  extending unit requirements  * WIP : initial integration of nut-
	  driver-enumerator.sh/service into makefiles etc.  * nut-driver-
	  enumerator.sh renamed into nut-driver-enumerator.sh.in as it has
	  processable templates in code  * nut-driver-enumerator.sh.in : add
	  its own config-file support to set the variables used inside (if
	  not via command-line env)  * nut-driver-enumerator.sh.in : fix up
	  the copyright header  * Subject: Fix systemd service file for
	  Debian From: Laurent Bigonville <bigon@debian.org> Forwarded: not-
	  needed  * nut-driver-enumerator.sh.in : complete the Solaris SMF
	  support in the helper script  * EXTRA_DIST the scripts/systemd/nut-
	  driver.target (non-templated) file  * nut-driver-enumerator.sh.in :
	  updated comments (esp. about usage and exit-codes) and runtime
	  messages  * nut-driver-enumerator.service.in : define an actual
	  service payload  * nut-driver-enumerator.sh.in : refactor the logic
	  of MAIN PROGRAM into smaller routines for readability  * nut-
	  driver-enumerator.sh.in : introduce routines to help define custom
	  dependencies of particular drivers on other services  * nut-driver-
	  enumerator.sh.in : allow custom NUT_CONF_DIR from envvar, to
	  facilitate testing  * nut-server.service.in : typo fix in comments
	  * nut-driver-enumerator.sh.in : support the concept of localhost
	  networking dependencies, and define vars with lists of services to
	  depend on  * nut-driver-enumerator.sh.in : use proper FMRI:instance
	  separator for SMF  * nut-driver-enumerator.sh.in : added variables
	  for dependency type on third-party service units  * nut-driver-
	  enumerator.sh.in : change upsconf_getDriverMedia() output from tab-
	  separated to multiline; add upsconf_getMedia() and upsconf_debug()
	  and upslist_debug()  * nut-driver-enumerator.sh.in : refactor with
	  upsconf_getValue() and cached pre-cooked ups.conf data;
	  infrastructure to configure service dependencies when adding the
	  service instance  * Remove hardcoded dependencies on udev and
	  network from provided systemd units; add comments about extending
	  via drop-in files and that nut-driver-enumerator will do this for
	  nut-drivers  * nutshutdown.in : mark executable  * nut-driver-
	  enumerator.sh.in : complete the systemd drop-in support for custom
	  dependencies for a driver  * nut-driver-enumerator.sh.in : complete
	  the SMF drop-in support for custom dependencies for a driver  *
	  nut-driver-enumerator.sh.in : comment-away upslist_debug() in
	  default runs  * WIP Adding Solaris SMF manifests for NUT  *
	  Sanitize Solaris SVR4 packaging rules  * Sanitize Solaris packaging
	  scripts some more  * Add configure options for Solaris packaging
	  variants  * Sanitize Solaris packaging scripts some more - consider
	  DESTDIR for installation root  * Turn solaris preproto.pl into a
	  template so it uses proper (configured) user/group strings  *
	  Makefile.am : ensure there is a DESTDIR set before packaging  *
	  Makefile.am : use $(MAKE) $(AM_MAKEFLAGS) instead of explicit
	  "make" (mostly in packaging recipe)  * makelocal.sh : commented and
	  revised  * Solaris/Makefile.am : put generated SVR4 package into
	  builddir (not srcdir that may be readonly) to match other OS
	  recipes  * Makefile.am : ensure the DESTDIR is used for packaging
	  purposes (when calling sub-makes)  * Solaris/pkginfo.in : ARCH is
	  CPU_TYPE, not OS_NAME  * GitIgnore built Solaris/NUT*.local.gz
	  product  * GitIgnore built systemd files  * GitIgnore
	  _install_pkgprotodir  * Makefile.am : ensure only the custom
	  DESTDIR is used for packaging purposes  * Makefile.am : convert the
	  big packaging "if" into "case"; link steps with "&&"; retain
	  DESTDIR if Solaris packaging fails; ensure the correct custom
	  DESTDIR is absent before packaging (and after Solaris packaging)  *
	  Solaris/Makefile.am : Revise recipe-names and comments for Solaris
	  packaging variants  * Solaris/Makefile.am and *.xml.in : relocate
	  SMF methods and manifests under NUT DATADIR to package compactly  *
	  Solaris-SMF : svc-nut.in svc-nut-client.in : use @RUN_AS_*@ and
	  @PIDPATH@ vars instead of hardcoding  * Solaris/Makefile.am : list
	  helper scripts and installation scripts and data in variables and
	  depend on them in packaging; chmod +x the scripts after copying
	  over to proto area  * GitIgnore config.cache  * Remove
	  Solaris/prepackage.py (unreferenced duplicate of precheck.py)  *
	  Solaris/nut.in : sanitize the default init-script  *
	  Solaris/Makefile.am : put init-scripts under NUT share (DATADIR) to
	  package it compactly; copy to OS dirs in postinstall  * Makefile.am
	  .gitignore etc. relocate successfully built package files to
	  abs_top_builddir  * Change Aix/nut.init to a .in template  * svc-
	  nut.in svc-nut-client.in : consider nut.conf if available  *
	  Solaris/Makefile.am and SVR4 scripts : install augeas lenses as
	  part of NUT package (in DATADIR at least)  * configure.ac : comment
	  about sysconfdir for NUT  * Sanitize Aix/nut.init.in  * More
	  standardization of Solaris initscripts and SMF methods; use
	  LD_LIBRARY_PATH to prefer NUT provided libs in case of conflicts
	  (facilitate bundling with third-party packages)  *
	  Solaris/Makefile.am : add ability to "make check" something here,
	  e.g. validate manifest XMLs  * Solaris SMF XML manifests : fix
	  "dependent" definitions, and add dependencies on required config
	  files  * configure.ac : fix a manually crafted "Checking for" into
	  using AC_MSG routines  * Solaris SVR4 packaging should now take
	  care of SMF service registration/teardown  * Solaris preremove.in
	  postinstall.in : Usage of @datadir@ caused "${prefix}" strings to
	  pop up - define the vars  * Solaris scripts : use lower-cased
	  @datadir@ in templates processed by configure  *
	  Solaris/preremove.in : fix FMRI pattern when removing package  *
	  Solaris/postinstall.in : fix SMF manifest dir  *
	  Solaris/postremove.in : fix verbose RM; wipe the /var/run/nut dir
	  too  * Solaris/preremove.in : fix commands when removing package  *
	  Solaris/postinstall.in : enable SMF services if configs are already
	  available (esp. create nut-driver instances)  *
	  Solaris/preremove.in : fix commands when removing package  *
	  Solaris/postinstall.in : enable SMF services if configs are already
	  available (esp. create nut-driver instances) - verbosity  *
	  Solaris/nut-driver-enumerator.xml.in : use a unique dependency name
	  (avoid conflict in nut-driver instances chain of deps)  * systemd
	  and Solaris : fix up embedded ${prefix} in service files and SMF
	  manifests after generation  * systemd/README : add recent authors
	  * Define a NUT_DATADIR and NUT_LIBEXECDIR with expanded path values
	  to use in service manifests  * Solaris : packaged service
	  addition/removal more verbose  * nut-driver-enumerator.xml.in nut-
	  driver.xml.in : do not block startup of nut server  * nut.xml.in :
	  do not block startup of nut server due to failed nut-driver-
	  enumerator  * nut-driver-enumerator.sh.in : improve portability by
	  using TAB char as is (not regex \t which gets misinterpreted by
	  some tools)  * nut-driver-enumerator.sh.in : comment the caveats  *
	  nut-driver-enumerator.sh.in : apcsmart is serial only  * nut-
	  driver-enumerator.sh.in : By default, update wrapping of devices
	  into services... but keep the door open to other uses of the script
	  * nut-driver-enumerator.sh.in : refactor a bit and add externally
	  callable actions  * Introduce upsdrvsvcctl with semantics similar
	  to upsdrvctl, but managing stop/start of SMF or systemd unit
	  instances  * nut-driver-enumerator.sh.in : consider possible
	  difference of device and service instance names  * nut-driver-
	  enumerator.sh.in : refactor md5  * nut-driver-enumerator.xml.in :
	  add REFRESH action and do not die on RESTART  * Mention nut-driver-
	  enumerator and upsdrvsvcctl in (systemd/|Solaris/)README  *
	  upsdrvsvcctl.in : updated comments  * upsdrvsvcctl.in : added a
	  resync option  * Rename Solaris SMF services to match systemd
	  patterns and ease life for sysadmins  * Add systemd nut.target to
	  manage the bundle of NUT services  * config-notes.txt : document
	  the systemd and SMF support in NUT  * nut.dict : update
	  spellchecker  * Solaris/Makefile.am : support copying where attrs
	  can not be preserved  * Solaris postinstall : report if services
	  were not instantly enabled due to missing config files  *
	  upsdrvsvcctl.in : reformat prettily  * nut-driver-enumerator.sh.in
	  : wrap usage()  * nut-driver-enumerator.sh.in : added --list-
	  services-for-devices  * nut-driver@.service.in : comment about
	  aligning timeouts with ups.conf maxstartdelay  * nut.xml.in :
	  Revise comments  * nut-driver-enumerator.sh.in : when amending
	  service unit instance config for systemd, update the Description to
	  state the NUT device section name  * nut-driver-enumerator.sh.in :
	  support common NUT_CONFPATH envvar  * Add upsdrvsvcctl.txt manpage
	  and references to upsdrvsvcctl in other docs  * upsdrvsvcctl.txt
	  manpage : refer to service management system logs  * upsdrvsvcctl :
	  support "list upsname" CLI action to help troubleshooting  *
	  upsdrvsvcctl : add handling for "shutdown" command  * Docs about
	  upsdrvsvcctl - clarify that it may not be preinstalled with non-
	  SMF/non-systemd OS packages  * Pass spellcheck for upsdrvsvcctl doc
	  updates  * Solaris packaging of nut-driver-enumerator.sh : deliver
	  into libexecdir same as in Linux  * Move nut-driver-
	  enumerator.sh.in and upsdrvsvcctl.in into scripts/upsdrvsvcctl to
	  share on par between Linux and Solaris (for starters)  * Use
	  @NUT_LIBEXECDIR@ for nut-driver-enumerator.sh  * Introduce nut-
	  driver-enumerator.path.in for systemd  * nut-driver-
	  enumerator.service.in : be part of nut.target, not common multi-
	  user  * Systemd services : be PartOf=nut.target to propagate
	  service stops  * postinstall.in : use NUT_DATADIR  * nut-
	  monitor.xml.in : depend on nut-server (if locally running)  *
	  nut.xml.in : fix path (use pre-eval-ed version)  * nut-driver-
	  enumerator.sh.in : add a way to print out just an instance suffix
	  name  * nut-driver-enumerator.sh.in : when printing full instance
	  name, do not add stuff if the argument is already a full name  *
	  nut-driver-enumerator.sh.in : implement --get-device-for-service  *
	  nut-driver (systemd/SMF) : use "nut-driver-enumerator.sh --get-
	  device-for-service" for current service instance name  * nut.xml.in
	  : this service is transient  * upsdrvsvcctl.in : fix parameter
	  passing  * upsdrvsvcctl.in : "clear" the SMF service state when
	  stopping/starting, just in case it was failed  * nut-driver-
	  enumerator.sh.in : restart upsd IFF the set of known-device
	  mappings was changed  * Revise and relax some dependencies for
	  Solaris SMF services  * nut-driver-enumerator.sh.in : info messages
	  go to stderr; reply for request only goes to stdout  * nut-driver-
	  enumerator.sh.in : complete the upslist_equals() method  *
	  nut.xml.in : never fail on stop (if component services did not
	  stop, it is their problem)  * Solaris preremove.in SMF : clear
	  sevices before stopping them, just in case  * upsdrvsvcctl.in :
	  post-process clearing of SMF service instances if any have failed
	  * nut.xml.in : never fail on stop (if component services did not
	  stop, it is their problem)  * Solaris preremove.in SMF : remove nut
	  before services it depends on  * main.c upsdrvctl.c : make debug
	  messages a bit more useful  * Solaris preremove.in SMF : do not
	  block stopping NUT driver services, but follow up with
	  upsdrv(svc)ctl stop of everything  * Solaris preremove.in SMF :
	  sleep after stopping drivers before removing their services  *
	  Solaris preremove.in SMF : force-remove services of drivers  * nut-
	  driver.xml.in : rename a dependency to avoid conflicts  * Solaris
	  nut.xml.in : add a refresh action handler  * Solaris postinstall.in
	  SMF : first use nut-driver-enumerator.sh.in to just register the
	  mappings, no autostarts  * Solaris preremove.in SMF : stop drivers
	  with common method (and use NUT_SBINDIR) before going one by one  *
	  Solaris postinstall.in SMF : start the drivers via upsdrvsvcctl
	  after registering (so the mapping is stable)  * Solaris
	  postinstall.in preremove.in : NUT_SBINDIR => SBINDIR  * Add manpage
	  for nut-driver-enumerator[8]  * Handle EXTRA_DIST of
	  scripts/upsdrvsvcctl/ with their own Makefile  * nut-driver-
	  enumerator.txt : change to be more like other page sources  *
	  Spellcheck nut-driver-enumerator.txt  * Add
	  scripts/upsdrvsvcctl/README  * Update gitignores  * List new
	  manpages upsdrvsvcctl nut-driver-enumerator in index  * Add
	  upsdrvsvcctl do scripts/Makefile.am SUBDIRS  * upsdrvsvcctl.in nut-
	  driver-enumerator.sh.in : Add a way to show configs per device  *
	  nut-driver-enumerator.sh.in : fix upsconf_getValue() to return
	  success if key was found, or report an error if not  * nut-driver-
	  enumerator.sh.in : expose upsconf_getValue() as --show-device-
	  config-value  * nut-driver-enumerator.sh.in : NOTE on top about the
	  choice of simplified shell  * nut-driver-enumerator.sh.in : in
	  upsconf_getSection() stop after printing out the section contents
	  * nut-driver-enumerator.sh.in : refactor upsconf_getValue() to use
	  upsconf_getSection()  * nut-driver-enumerator.sh.in : update
	  comment in header  * nut-driver-enumerator.service.in : do not fail
	  the systemd unit, it cannot restart  * Fix references for
	  configure.in to point to configure.ac nowadays  * nut-driver-
	  enumerator.sh.in : use fully-pathed SMF svccfg in all parts of code
	  consistently  * nut-driver-enumerator.sh.in : comment about not-
	  detecting reconfigurations of existing sections currently
	* docs/man/Makefile.am, scripts/subdriver/gen-snmp-subdriver.sh:
	  Upstream smaller fixes from 42ity NUT (#587)  * gen-snmp-
	  subdriver.sh : replace multiline "echo" with questional tabbing by
	  a single-string "printf"  * docs/man/Makefile.am : fix merge error
	  that broke manpage packaging

2018-07-31  Daniele Pezzini <hyouko@gmail.com>

	* tools/nut-scanner/nut-scanner.c: nutscanner: get debug level early
	  (for nutscan_init()) and restore options (#541)  * Revert "Problem:
	  nutscan_init() called before debug is enabled"  This reverts commit
	  f613d45f78c96c290a1d63d4a2c3f28385d90d42.  When parsing the command
	  line (or showing help), many options rely on a nutscan_avail_* var
	  already initialized by nutscan_init() -- moving that call after the
	  parsing of opts renders those options unavailable.  * nutscanner:
	  parse debug level opts separately before anything else  In order to
	  have early the value of the desired debug level (needed to
	  correctly debug nutscan_init()), split the parsing of command line
	  options into two loops: - the first one, before the call to
	  nutscan_init(), will only care about debug level, - the second one,
	  after the call to nutscan_init(), will consider the remaining (and
	  possibly depending on a nutscan_avail_* var already initialized by
	  nutscan_init()) arguments (and moan in case of errors).  Closes
	  https://github.com/networkupstools/nut/issues/500

2018-07-28  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: support USB devices that don't
	  close their replies with a CR  Since some devices, when
	  communicating via USB, don't close their replies to our
	  commands/queries with the expected (and mandated by the specs) CR,
	  rendering the driver almost useless as protocols get one less
	  character than they expect, update the various USB subdrivers
	  (leaving out the ones that rely on a CR to stop reading from the
	  device) to add the missing terminating CR in such cases (as long as
	  we get anything usable). This is a bit of a cheat, but, at least
	  for now, it will do -- not to mention the fact that it is way less
	  invasive than touching all the places of the driver that expect a
	  closing CR and all the qx2nut tables of the various protocols.
	  Close https://github.com/networkupstools/nut/issues/441

2018-07-25  mbastiaan <35669404+mbastiaan@users.noreply.github.com>

	* drivers/tripplite_usb.c: input_voltage_nominal, added case 6
	  SMX500RT1U 230V requires case 6.
	* drivers/tripplite_usb.c: Update tripplite_usb.c  Incremented driver
	  version for pull request #584
	* data/driver.list.in: Update driver.list.in  Added new line for
	  SMX500RT1U with product ID 0001. Updated line for other product IDs

2018-07-24  mbastiaan <35669404+mbastiaan@users.noreply.github.com>

	* drivers/tripplite_usb.c: Update tripplite_usb.c  Added
	  battery.charge status for 3005 protocol. Tested on SMX500RT1U,
	  charge level seems ok-ish considering how it's calculated and the
	  voltage jumping up and down.

2018-06-17  Links <help.markus+gitk@gmail.com>

	* drivers/mge-hid.c: get PowerWalker VFI 2000 TGS working, read
	  values correctly

2018-03-17  Steve Gilbert <stevegilbert23@gmail.com>

	* drivers/libhid.c: In HIDGetEvents.c call to get_interrupt, increase
	  timeout from 250 to 750 ms to allow more time for UPS response
	  (cherry picked from commit 5cea18c04a79cd873347efeffb6bb869edd8643e
	  --@clepple)  Closes:
	  https://github.com/networkupstools/nut/pull/543 Closes:
	  https://github.com/networkupstools/nut/issues/542

2018-05-24  Charles Lepple <clepple+nut@gmail.com>

	* drivers/tripplite-hid.c: usbhid-ups: Add support for
	  Delta/Minuteman UPS
	  https://github.com/networkupstools/nut/issues/555

2018-05-22  Jim Klimov <jim@jimklimov.com>

	* .travis.yml, ci_build.sh: Change the Travis test-case for
	  NO_PKG_CONFIG==true

2018-05-18  Arnaud Quette <ArnaudQuette@Eaton.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: Improve the SNMP subdriver
	  generation script  Provide a 3rd mode to allow an offline creation
	  for a complete MIB walk. In this mode, we get data from 1 file
	  (numeric snmpwalk dump of the whole SNMP tree). The sysOID is
	  extracted from the dump, and only the pointed subtree is used. A
	  MIB file MUST be provided, and is used to produce the string SNMP
	  walk.  Also reformatted the whole script using tab only, and
	  reconciled with the DMF version.

2018-05-15  Bernhard M. Wiedemann <githubbmw@lsmod.de>

	* tools/nut-snmpinfo.py, tools/nut-usbinfo.pl: Sort input file list
	  (#528)  so that nut builds in a reproducible way in spite of
	  indeterministic filesystem readdir order and
	  http://bugs.python.org/issue30461  See https://reproducible-
	  builds.org/ for why this is good.

2018-05-02  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: in 'sgs' USB subdriver, use
	  #define'd value for USB timeouts

2018-03-15  Daniele Pezzini <hyouko@gmail.com>

	* tools/nut-scanner/scan_usb.c: nutscanner: in scan_usb.c, nullify
	  free()'d pointers that are later reused  We assign 'device_name',
	  'serialnumber' and 'vendor_name' only if the analyzed device
	  provides that data and, since we use these pointers also to check
	  if those items are available so that we can store and free() them,
	  after free()'ing them we must make them NULL, or the next device,
	  if it does not provide that data, will inherit the old (now
	  free()'d) pointer and will attempt to access it and re-free() it.
	* drivers/libusb1.c: libusb1: don't use the same var to iterate both
	  devices and interface descriptor  From our old libusb.c, libusb1.c
	  inherited a for loop that iterates over the interface descriptor in
	  order to try and find the HID descriptor among its 'extra' bytes.
	  Unluckily, it uses the same var (i) that's now used, at the same
	  time, for the iteration through the device list, in which it
	  happens to be nested. Since this obviously spells disaster, make
	  these vars unique (and add a bit of debugging info).

2018-03-14  Daniele Pezzini <hyouko@gmail.com>

	* data/cmdvartab, docs/nut-names.txt: libusb: update example of
	  driver.version.usb and add it to cmdvartab
	* drivers/libusb1.c: libusb1: publish actual libusb version
	* tools/nut-scanner/scan_usb.c: libusb: in nutscanner, free busname
	  also on nutscan_new_device() errors or when done with it
	* drivers/bcmxcp_usb.c, drivers/libusb0.c, drivers/libusb1.c,
	  drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c, tools/nut-
	  scanner/scan_usb.c: libusb: improve handling of errors when
	  allocating new memory  - libusb 0.1 (when not shared with libusb
	  1.0): prefer our xstrdup() function -- on errors, it'll
	  automatically call fatal*(), - libusb 1.0 (and nutscanner): don't
	  use our x{malloc,strdup,...}() functions, so that we can free the
	  list of devices (and close the device and call libusb_exit() in
	  nutscanner) before exiting.
	* drivers/libusb1.c: libusb1: publish the interface we are actually
	  using
	* drivers/richcomm_usb.c: richcomm_usb: use the local USB device
	  handle in usb_device_open()  Although at that point of
	  usb_device_open(), both the local (handle) and the global (udev)
	  device handles point to the same thing, prefer the local one to
	  make things clearer.
	* drivers/bcmxcp_usb.c, drivers/libusb0.c, drivers/libusb1.c,
	  drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c, tools/nut-
	  scanner/scan_usb.c: libusb: clean up after ourselves  libusb 1.0: -
	  a device list allocated with libusb_get_device_list() must be
	  deallocated with a call to libusb_free_device_list(), - ditto for
	  the config descriptor.  libusb 0.1 and 1.0: - release (commented-
	  out) interfaces when done with them, - remove unnecessary goto's
	  after calls to fatal*() functions, - nutscanner: also close the USB
	  device handle (and libusb_exit() for libusb 1.0) on errors.

2018-03-13  Daniele Pezzini <hyouko@gmail.com>

	* drivers/bcmxcp_usb.c, drivers/tripplite_usb.c: usb drivers: free
	  USBDevice_t's dynamically allocated items when cleaning

2018-03-13  Georg Altmann <george@george-net.de>

	* docs/nut.dict: doc: update nut.dict
	* INSTALL.nut: doc: Update installation instructions for FreeBSD
	  Details usb device permissions. Also pkg and new port config style.

2018-03-10  Patrik Dufresne <ikus060@kase>

	* drivers/powerp-txt.c: Fix tabs
	* drivers/powerp-txt.c: Change status line parsing for CyberPower
	  OR1500LCDRTXL2U  Add a new way to parse the status line in
	  powerpanel text driver to support CyberPower model OR1500LCDRTXL2U
	  with serial cable. This model doesn't provide temperature, but does
	  provide runtime.

2018-03-09  Jim Klimov <jim@jimklimov.com>

	* drivers/main.c, drivers/upsdrvctl.c: main.c upsdrvctl.c : make
	  debug messages a bit more useful

2018-03-05  Daniele Pezzini <hyouko@gmail.com>

	* drivers/richcomm_usb.c: richcomm_usb: don't libusb_exit() when
	  closing a previously opened device
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: don't libusb_exit()
	  when closing a previously opened device
	* drivers/libusb1.c: libusb1: don't libusb_exit() when closing a
	  previously opened device
	* drivers/riello_usb.c: riello_usb: use libusb_bulk_transfer() for
	  bulk operations
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: add missing 'inline'
	  keyword

2018-03-04  Charles Lepple <clepple+nut@gmail.com>

	* drivers/usbhid-ups.c: usbhid-ups: fix instcmd logging before
	  fallback check  The hidups_item pointer needs to be checked for
	  NULL before dereferencing.

2018-02-28  Jim Klimov <jimklimov@gmail.com>

	* drivers/snmp-ups.c: Fix the recently added update for Avocent
	  support (#532)  * Problem: snmp-ups segfaults  Solution:
	  base_snmp_template_index() prevented from processing empty argument
	  * Problem: index has to be counted for any device not just for
	  daisychain  Solution: counted for both   * Problem: debug info
	  needs improvement  Solution: added   * drivers/snmp-ups.c : bump
	  the version for public-release driver fix  * snmp-ups.c : Fix
	  indentation for recent fixes

2018-02-20  Bernhard M. Wiedemann <bwiedemann@suse.de>

	* tools/nut-usbinfo.pl: Cleanup usbinfo code  to reduce code
	  duplication and solve an associated FIXME

2018-02-16  Arnaud Quette <ArnaudQuette@Eaton.com>

	* data/driver.list.in, drivers/Makefile.am, drivers/emerson-avocent-
	  pdu-mib.c, drivers/emerson-avocent-pdu-mib.h, drivers/snmp-ups.c:
	  snmp-ups: Add support for Emerson Avocent PM3000 PDU
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: various
	  improvements  This prepares the addition of newer devices

2018-01-11  Daniele Pezzini <hyouko@gmail.com>

	* m4/nut_check_libusb.m4: autoconf: support libusb 0.1
	  implementations identified as 'libusb-0.1'  Make NUT_CHECK_LIBUSB
	  macro aware of those libusb 0.1 implementations named in their pkg-
	  config files as 'libusb-0.1', instead of just 'libusb' (e.g. on
	  FreeBSD).

2018-01-10  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: update USB errors handling to
	  support both libusb 0.1 and 1.0

2018-01-02  Charles Lepple <clepple+nut@gmail.com>

	* configure.ac: Fix AC_MSG_*() quoting  The autoconf quote characters
	  are `[` and `]` - no need for `"`.

2018-01-01  Charles Lepple <clepple+nut@gmail.com>

	* m4/nut_check_libusb.m4: Add autoconf check for libusb_strerror()
	  Closes: https://github.com/networkupstools/nut/issues/509
	* docs/man/nutdrv_qx.txt, docs/man/snmp-ups.txt,
	  docs/man/ups.conf.txt, docs/man/usbhid-ups.txt: doc: Clean up
	  description of `pollfreq` and USB interrupts  Closes:
	  https://github.com/networkupstools/nut/issues/476

2017-12-05  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml : add a test-case for builds in absence of
	  pkg-config in the OS

2017-11-29  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/configure.txt, docs/man/nutupsdrv.txt, docs/man/upsd.txt: doc:
	  missing documentation for NUT_* env vars  Complete documentation
	  for upsd and drivers related to the environment variables
	  NUT_CONFPATH, NUT_STATEPATH and NUT_ALTPIDPATH

2017-04-08  Sam Varshavchik <mrsam@courier-mta.com>

	* docs/man/Makefile.am: Fix creation of documentation from
	  libnutclient_misc.txt  A simple .txt.3 rule doesn't understand that
	  libnutclient_misc.txt creates a bunch of .3.  A parallel build, say
	  'make -j 10' results in make trying to figure out how to build
	  nutclient_authenticate.3 before building libnutclient_misc.3, and
	  without a corresponding .txt in sight it gives up.  Rebased onto
	  master by Charles Lepple clepple+nut@gmail.com Closes:
	  https://github.com/networkupstools/nut/pull/418

2017-11-28  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/usbhid-ups.txt: doc: minor formatting in usbhid-ups man
	  page

2017-11-27  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/nutupsdrv.txt: doc: reword nutupsdrv man page  Reference:
	  https://github.com/networkupstools/nut/issues/476

2017-11-27  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nut-scanner.c: Problem: nutscan_init() called
	  before debug is enabled  Solution: Move the call to this stateless
	  function to the point after we parse arguments and just before we'd
	  start the actual scans. Later this can be extended to also consider
	  which scans were requested and so which libs to load.  Thanks to
	  @clepple for research in
	  https://github.com/networkupstools/nut/issues/500

2017-11-26  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/usbhid-ups.txt: doc: reword other parts of usbhid-ups man
	  page
	* docs/man/usbhid-ups.txt: doc: mention CPS delay quirks in usbhid-
	  ups man page  Closes:
	  https://github.com/networkupstools/nut/issues/432
	* tools/nut-scanner/scan_usb.c: nut-scanner: update
	  usb_get_string_simple() for libusb-1.0 API  Closes:
	  https://github.com/networkupstools/nut/issues/499
	* drivers/libusb1.c: libusb1: const-ify the USB interface number
	  Remove a few "magic numbers" from USB/HID-related calls.
	* drivers/libusb1.c: libusb1: LBYL approach to
	  libusb_set_auto_detach_kernel_driver()  Switch to look-before-you-
	  leap (LBYL) approach to calling
	  libusb_set_auto_detach_kernel_driver(), since FreeBSD (11.0 and
	  11.1; probably others) requires root privileges to attempt the
	  kernel driver detach (even if no detach operation is needed).
	* m4/nut_check_libusb.m4: libusb1: check for
	  libusb_kernel_driver_active()

2017-11-21  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Change Riello IDG/IPG support level to 4
	  The IDG and IPG models were not included in the protocol
	  documentation provided to the NUT project. Some values are also
	  returned as 0xFF/0xFFF/0xFFFF - see the HCL for details.  Source:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2017-November/007357.html

2017-11-17  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/nutupsdrv.txt, docs/man/usbhid-ups.txt: man pages:
	  clarification on polling parameters  Explain difference between
	  pollfreq and pollinterval in usbhid-ups, and highlight the
	  pollinterval parameter use from ups.conf in nutupsdrv  Closes:
	  https://github.com/networkupstools/nut/issues/476
	* data/driver.list.in: HCL: Eaton 9PX supported by mge-shut, usbhid-
	  ups and netxml-ups
	* data/driver.list.in: HCL: Eaton ATS 30 supported by snmp-ups
	* drivers/Makefile.am, drivers/mge-hid.c: mge-shut/usbhid-ups:
	  compute Output load for Eaton UPS  When HID data
	  UPS.PowerConverter.Output.ActivePower is not present, compute a
	  realpower approximation using available data. This is needed for
	  Eaton 5E and some other units  Closes:
	  https://github.com/networkupstools/nut/issues/484

2017-10-30  Michal Marek <MichalMarek1@eaton.com>

	* Makefile.am, configure.ac, scripts/systemd/Makefile.am:
	  configure.ac: Fix systemd shutdown directory detection  The
	  configure script assumes that systemd is installed below ${libdir},
	  which is not true on many biarch Linux distros with /lib64. Instead
	  of guessing, use pkg-config to find the path and provide a --with-
	  systemdshutdowndir option so that make distcheck can override it.
	  Also, rename the internal varable to systemdshutdowndir to rhyme
	  with the respective systemd.pc variable.

2017-10-20  Jim Klimov <jimklimov@gmail.com>

	* configure.ac: Problem: configure fails on system without pkg-config
	  Solution: detect presence and usability of pkg-config program and
	  autotools macros (they end up as unexpanded tokens if pkg-config is
	  not installed), and use this knowledge to proceed with search for
	  libcppunit - or not. When the test is optional, we should not kill
	  the build if we can not make it due to missing tools.

2017-10-11  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : line-
	  breaks for readability and 80-col standard - pass 2
	* drivers/eaton-pdu-marlin-mib.c: eaton-pdu-marlin-mib.c : line-
	  breaks for readability and 80-col standard

2017-10-08  Charles Lepple <clepple+nut@gmail.com>

	* docs/hid-subdrivers.txt: hid-subdrivers.txt: fix explore command
	  line  Also reformat some surrounding text.  Closes:
	  https://github.com/networkupstools/nut/issues/436
	* docs/hid-subdrivers.txt: hid-subdrivers.txt: clarify Tripp-Lite USB
	  reference  Closes:
	  https://github.com/networkupstools/nut/issues/452
	* docs/man/powerpanel.txt: powerpanel: emphasize that this driver is
	  serial-only  Apparently, the PowerPanel Plus vendor tool also has
	  USB support.
	* docs/man/belkin.txt, docs/man/belkinunv.txt: belkin/belkinunv: add
	  links to man pages for other Belkin drivers
	* docs/man/tripplite_usb.txt: tripplite_usb: update man page  * Fix
	  link to tripplitesu(8) * Add 3005 protocol * Update protocol
	  variable name
	* docs/man/dummy-ups.txt: dummy-ups: last state should be "OB LB" to
	  match text  Also corrected a typo.

2017-10-03  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/configure.txt: Update configure documentation for libusb
	  Document the possibility to override the auto-detection choice

2017-10-04  Daniele Pezzini <hyouko@gmail.com>

	* configure.ac, m4/nut_check_libusb.m4: libusb 1.0 port: directly use
	  `--with-usb` to choose the library

2017-10-03  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/configure.txt: Remove an extraneous point
	* docs/configure.txt: Update configure documentation for libusb
	  Document the possibility to override the auto-detection choice,
	  even though the implementation of this override is not yet
	  currently working

2017-10-02  Daniele Pezzini <hyouko@gmail.com>

	* docs/configure.txt, m4/nut_check_libusb.m4: libusb 1.0 port:
	  support libusb 0.1/-compat even when 1.0 is available  Since libusb
	  1.0 can happily coexist with libusb 0.1/libusb-compat, rework our
	  NUT_CHECK_LIBUSB macro so that, if both are available, libusb 1.0
	  precedence can be overridden passing to `configure` appropriate
	  values for `--with-usb-includes` and `--with-usb-libs` (i.e. libusb
	  0.1/libusb-compat-only settings).
	* m4/nut_check_libusb.m4: libusb 1.0 port: expand a bit the
	  introductory comment of libusb ac macro
	* m4/nut_check_libusb.m4: libusb 1.0 port: use only one AC_DEFINE'd
	  variable for libusb 0.1/-compat  Libusb 0.1/libusb-compat can be
	  found with both pkg-config and with its own libusb-config, but,
	  regardless of how we found it, we need to use the same AC_DEFINE'd
	  variable to signal its presence.
	* m4/nut_check_libusb.m4: libusb 1.0 port: don't check if libusb is
	  usable, if it's not available  Since LIBUSB_VERSION is always non-
	  empty ('none', if libusb is not found), testing for non-emptiness
	  will always fail and libusb 0.1/libusb-compat checks will always be
	  performed. So, test instead that it is not 'none'.

2017-03-22  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/libusb1.c, drivers/nut_libusb.h, tools/nut-
	  scanner/scan_usb.c: Fix spacers

2016-11-09  Charles Lepple <clepple+nut@gmail.com>

	* docs/nut-names.txt, drivers/libusb0.c, drivers/libusb1.c: Add
	  `driver.version.usb` variable  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-09-25  Charles Lepple <clepple+nut@gmail.com>

	* drivers/libusb1.c: libusb1: use return code from libusb_open()  Per
	  <http://libusb.sf.net/api-1.0/group__dev.html#ga8163100afdf933fabed
	  0db7fa81c89d1>, the handle is only populated when the return code
	  is 0.  This fixes a crash during device detection where more than
	  one HID UPS is available, and the driver needs to skip the first
	  one.

2016-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/libusb1.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c: libusb 1.0 port: fix
	  return code for interrupt ops  libusb 1.0 returns on success, the
	  number of bytes actually transferred or otherwise an error code,
	  except for interrupt transfers, where the actual transfer size is
	  stored in a separate variable. The libusb 1.0 implementation in NUT
	  thus needed to be fixed to behave the same way than the libusb 0.1
	  implementation  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0 port: remove the check on USB device
	  count  With the port to libusb 1.0, a sanity check was done on the
	  available number of USB devices to try. This however caused a
	  behavior regression, since the only device that NUT may have access
	  to can be the only UPS connected. In this case, the driver may exit
	  upon trying to reconnect if the device is transiently not available
	  Reference: https://github.com/networkupstools/nut/issues/300
	* drivers/libusb1.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  complete usb_set_altinterface code  usb_set_altinterface allows to
	  force the USB code to call `libusb_set_interface_alt_setting (0,
	  0)` (equivalent to `libusb_set_altinterface(0)` in libusb 0.1), as
	  was done in NUT 2.7.2 and earlier. However, the libusb 1.0
	  implementation was still missing the related code  Reference:
	  https://github.com/networkupstools/nut/issues/300
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  fix kernel driver detachment  Following the recent modification for
	  the kernel driver detachment, and the related functions
	  availability depending on the platforms, nutdrv_atcl_usb and
	  richcomm_usb were using the wrong macro for
	  libusb_set_auto_detach_kernel_driver and were missing the libusb
	  1.0 code for explicit kernel driver detachment  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c, m4/nut_check_libusb.m4: libusb 1.0 port: rework
	  the kernel driver detachment  libusb 1.0 has introduced a new
	  function (libusb_set_auto_detach_kernel_driver), beside from the
	  explicit kernel driver detachment request
	  (libusb_detach_kernel_driver). However, the former is not available
	  on all systems. As an example, FreeBSD 10.1-10.3 does not have
	  this. The detachment and interface claiming has been reworked to
	  handle this case (reported by Charles Lepple)  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-12  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0: remove unused typesafe_control_msg()
	  workaround  For libusb 0.1 implementation, we had to workaround a
	  libusb API goofs, by wrapping the base function usb_control_msg(),
	  and casting the variables to the right type. This is not needed for
	  libusb 1.0 implementation, but was wrongly left in the code
	  (reported by Charles Lepple)

2016-08-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: fix a warning on unused variable
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: simplify bus publication
	  bus publication was wrongly listing both the bus and the portname,
	  instead of the bus only. This may have caused some issue when
	  trying to match the port
	* drivers/usbhid-ups.c: usbhid-ups/mge-shut: forgotten version bump
	* drivers/usbhid-ups.c: usbhid-ups/mge-shut: rework errno/errors
	  handling  libusb 1.0 has its own set of return codes, and error
	  interface. Rework the common HID core (shared between usbhid-ups
	  and mge-shut) so that error handling can work with both, and using
	  either libusb 0.1 or 1.0 for usbhid-ups
	* tools/nut-scanner/scan_usb.c: nut-scanner: missing symbols lookup
	  for libusb 1.0  A few symbols from libusb 1.0 were wrongly used
	  directly, instead of being looked up and loaded at init time
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: add missing libusb_exit()
	  calls
	* tools/nut-scanner/nutscan-init.c, tools/nut-scanner/scan_usb.c,
	  tools/nut-usbinfo.pl: nut-scanner: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: Remove redundant
	  variable
	* drivers/tripplite_usb.c: tripplite_usb: remove extraneous comment
	  char
	* drivers/nut_libusb.h: permute typedef order of usb_dev_handle
	* drivers/nutdrv_qx.c: nutdrv_qx: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/richcomm_usb.c: richcomm_usb: missing function remap for
	  libusb 0.1  usb_strerror was not remapped for libusb 0.1
	  implementation
	* drivers/tripplite_usb.c: tripplite_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/riello_usb.c: riello_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices

2016-08-10  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/richcomm_usb.c: richcomm_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: add the missing detach
	  call  libusb 1.0 provide its own routine for detaching kernel
	  driver
	* drivers/Makefile.am, drivers/libhid.c, drivers/nut_libusb.h:
	  Forgotten occurences of libusb.h renaming  NUT internal header
	  "libusb.h" was renamed, since it collides with the libusb 1.0
	  header, which has the same name. A few occurences of reference and
	  documentation were however missing
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: initial port to libusb
	  1.0  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/blazer_usb.c: blazer_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/bcmxcp_usb.c: bcmxcp_usb: code cleanup

2016-08-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* docs/configure.txt, drivers/Makefile.am, drivers/libhid.c,
	  drivers/libhid.h, drivers/{libusb.c => libusb0.c},
	  drivers/libusb1.c, drivers/{libusb.h => nut_libusb.h}, drivers/usb-
	  common.h, drivers/usbhid-ups.c: ushid-ups: complete the port to
	  libusb 1.0  The port to libusb 1.0 is now complete for usbhid-ups.
	  Other USB drivers (bcmxcp_usb, blazer_usb, nutdrv_atcl_usb,
	  richcomm_usb, riello_usb, tripplite_usb, nutdrv_qx) have still to
	  be addressed

2016-08-01  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, m4/nut_check_libusb.m4: Initial port to libusb 1.0
	  Starting with the configure checks, to detect if libusb 1.0 if
	  available, and otherwise fall back to the libusb 0.1 backend

2017-09-17  Jim Klimov <jim@jimklimov.com>

	* configure.ac, tests/Makefile.am: Improve configure script and
	  recipe for CPPUNIT and C++11 detection  * Detect C++11 support and
	  its use for CPPUNIT tests through configure.ac - should address
	  issue #472 * Report after detecting C++11 support, presence of
	  libcppunit, and request for valgrind, whether we'd build the
	  cppunit tests * Update relevant comments in configure.ac
	* drivers/libusb0.c, drivers/libusb1.c: libusb0.c / libusb1.c :
	  report more visibly if we encountered errors accessing the device
	  (issue #477)
	* drivers/libusb0.c, drivers/libusb1.c: libusb0.c / libusb1.c :
	  sanitize indentation and break up long-lines

2017-09-21  Spiros Ioannou <sivann@inaccess.com>

	* drivers/phoenixcontact_modbus.c: phoenixcontact_modbus: fix stale
	  data detection  Also mark driver as DRV_BETA  Source:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2017-September/007331.html

2017-09-17  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : look for CPPUNIT after detecting pkg-
	  config presence, can help vs. issue #478

2017-09-06  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : dflt_statepath() / altpidpath() :
	  support defined-but-empty envvars to have same effect as not-
	  defined
	* common/common.c: common.c : altpidpath() : support priority of an
	  envvar, like statepath does

2017-09-05  Jim Klimov <jim@jimklimov.com>

	* drivers/main.c: main.c : update usage message with hints about
	  running as unprivileged user

2017-08-28  Jim Klimov <jimklimov@gmail.com>

	* .travis.yml, clients/upsclient.c, drivers/dstate.h, drivers/eaton-
	  pdu-marlin-mib.c, tests/Makefile.am: A few small fixes for cleaner
	  codebase and compilations (#466)  * dstate.h : use our timehead.h
	  to have "struct timeval" defined  * eaton-marlin : cosmetic
	  whitespace fixes  * tests/Makefile.am : cppunit should build with
	  C++11  * .travis.yml : make sure to use "docker" env with its
	  gcc-4.8+ for support of C++11 in cppunit tests

2017-08-24  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: docs/Makefile.am : fix up access rights for other
	  files in docs too (some PNGs end up inaccessible otherwise)

2017-08-23  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt, docs/nut.dict, drivers/eaton-ats16-mib.c: snmp-
	  ups: add support for input.phase.shift (#433)  * snmp-ups: add
	  support for input.phase.shift  ATS can now publish the electrical
	  dephasing between input sources   * Make spellchecker happy about
	  "dephasing"

2017-08-23  Christian Ehrhardt <christian.ehrhardt@canonical.com>

	* drivers/Makefile.am: automake: only pass net-snmp cflags to snmp-
	  ups (#464)  Other than formerly assumed in the makefile cflags can
	  be more than includes. And some of them need to be in sync in
	  regard to CFLAGS and LDFLAGS - for example usage of -fPIE.  This
	  conflicts with a current assumption in the makefile "In any case,
	  CFLAGS are only -I options, so there is no harm".  On a
	  Distribution where PIE is enabled by default, but disabled for
	  special cases (like net-snmp) the configure detection gets them as:
	  LIBNETSNMP_CFLAGS = -DNETSNMP_ENABLE_IPV6 -fno-strict-aliasing -g
	  -O2 -fdebug-prefix-map=/build/net-snmp-nlMQSZ/net-snmp-5.7.3+dfsg=.
	  -specs=/usr/share/dpkg/no-pie-compile.specs -fstack-protector-
	  strong -Wformat -Werror=format-security -DNETSNMP_USE_INLINE
	  -Ulinux -Dlinux=linux -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv
	  -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
	  -D_FILE_OFFSET_BITS=64 -I/usr/lib/x86_64-linux-gnu/perl/5.26/CORE
	  -Wdate-time -D_FORTIFY_SOURCE=2 -I/usr/include LIBNETSNMP_LIBS =
	  -Wl,-Bsymbolic-functions -specs=/usr/share/dpkg/no-pie-link.specs
	  -Wl,-z,relro -Wl,-z,now -L/usr/lib/x86_64-linux-gnu -lnetsnmp
	  -lcrypto -lm  Of importance are: -specs=/usr/share/dpkg/no-pie-
	  compile.specs -specs=/usr/share/dpkg/no-pie-link.specs  Now when
	  compiling the non-snmp objects incorrectly get the
	  "-specs=/usr/share/dpkg/no-pie-compile.specs" due to the assumption
	  that it is safe to add up all CFLAGS to the global one.  LDFLAGS
	  imported that way are only added to snmp. snmp_ups_LDADD =
	  $(LDADD_DRIVERS) $(LIBNETSNMP_LIBS) [...] snmp-ups$(EXEEXT):
	  $(snmp_ups_OBJECTS) $(snmp_ups_DEPENDENCIES)
	  $(EXTRA_snmp_ups_DEPENDENCIES) @rm -f snmp-ups$(EXEEXT)
	  $(AM_V_CCLD)$(LINK) $(snmp_ups_OBJECTS) $(snmp_ups_LDADD) $(LIBS)
	  That leads to other (all non snmp_ups) objects in drivers failing
	  to build. They get the no-pie-compile.specs (incorrect) spec but
	  not the no-pie-link.specs on the link step.  Some other parts like
	  mge_shut and nutdrv_qx already have custom CFLAGS/LDFLAGS that are
	  not added to the global CFLAGS. So despite the commend in the
	  makefile this doesn't seem to be new in general to nut.  I don't
	  want to mess too much with your build system for now as I don't
	  know many of its implications. So I chose not the full drop of that
	  global CFLAGS merge, but a minimal patch for now which fixes the
	  issue described.  Thereby closes #463

2017-08-23  Jim Klimov <jimklimov@gmail.com>

	* docs/snmp-subdrivers.txt, drivers/Makefile.am, drivers/eaton-mib.h,
	  drivers/eaton-pdu-genesis2-mib.c, drivers/eaton-pdu-genesis2-mib.h,
	  drivers/{eaton-mib.c => eaton-pdu-marlin-mib.c}, drivers/eaton-pdu-
	  marlin-mib.h, drivers/eaton-pdu-pulizzi-mib.c, drivers/eaton-pdu-
	  pulizzi-mib.h, drivers/eaton-pdu-revelation-mib.c, drivers/eaton-
	  pdu-revelation-mib.h, drivers/snmp-ups.c: Eaton ePDU SNMP MIB file
	  split in four (#465)  * snmp-subdrivers.txt : reference the
	  multitude of eaton subdrivers  * eaton-mib.h renamed into separate
	  constituent headers  * eaton-mib.c renamed into separate
	  constituent sources, earlier history retained in eaton-pdu-
	  genesis2-mib.c  * eaton-pdu-revelation-mib.c eaton-pdu-pulizzi-
	  mib.c eaton-pdu-genesis2-mib.c : no use to include dstate.h here  *
	  eaton-pdu-marlin-mib.c eaton-pdu-revelation-mib.c : port the
	  renamed structure names from original eaton-mib.c evolution

2017-08-16  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/snmp-ups.c: snmp-ups: fix the rounding / truncation of some
	  values  The multiplier system of the snmp-ups driver resulted in
	  some values being rounded to the nearby integer value, thus causing
	  a loss of the decimals and the value precision in general. This was
	  mainly visible on the value of currents, but also on some voltages

2017-08-07  Tobby <tobby88@users.noreply.github.com>

	* drivers/apcupsd-ups.c: apcupsd-ups: interpret "SHUTTING DOWN" as
	  "LB"  Fix issue https://github.com/networkupstools/nut/issues/460
	  so NUT with apcupsd-ups driver will correctly initiate a shut down
	  on low battery.  Bump version to 0.5  Closes:
	  https://github.com/networkupstools/nut/issues/460 Closes:
	  https://github.com/networkupstools/nut/issues/461

2017-08-10  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/apc-ats-mib.c, drivers/apc-ats-mib.h: Remove exec bits on
	  SNMP subdrivers

2017-08-02  Charles Lepple <clepple+nut@gmail.com>

	* drivers/cps-hid.c: CPS HID: add input.frequency and
	  output.frequency (0.5)  Suggested by Andy Jan:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2017-August/010856.html

2017-08-04  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/nut-names.txt: NUT namespace: fix an extraneous character
	  insertion  A character was wrongly inserted during the previous
	  commit, triggering a spellcheck error
	* drivers/eaton-mib.c: snmp-ups: Publish outlet.n.name for Eaton ePDU
	* docs/nut-names.txt: Extend namespace for iPDU and outlets  Extend
	  NUT namespace to also publish the name of an outlet, using
	  "outlet.n.name", beside from the existing "outlet.n.desc"

2017-08-03  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/eaton-mib.c: snmp-ups: Fix the phase of outlet groups for
	  Eaton PDU  Compute the phase to which an outlet group is connected
	  WRT the total number of phase(s) and the considered outlet group
	  number.
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: Introduce values
	  lookup functions  As already used in other drivers, such as usbhid-
	  ups, introduce optional values lookup functions, beside from values
	  lookup mapping. This allows to have a more powerful and generic
	  values processing before publication

2017-07-22  Charles Lepple <clepple+nut@gmail.com>

	* drivers/openups-hid.c: usbhid-ups: only check iOEMInformation once
	  for openups2  This prevents the 'libusb_get_string: invalid
	  argument' message from being logged continously.  Patch provided by
	  Alphonse <alphsteiner@gmail.com>
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2017-July/007314.html

2017-02-02  Daniel Schaal <daniel@schaal.email>

	* drivers/main.c: Add foreground option to drivers
	* docs/man/upsd.txt, scripts/systemd/nut-server.service.in,
	  server/upsd.c: Add foreground option to upsd

2016-12-17  Daniel Schaal <daniel@schaal.email>

	* clients/upsmon.c, docs/man/upsmon.txt, scripts/systemd/nut-
	  monitor.service.in: Add option to run upsmon in foreground

2017-06-26  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: docs/man/Makefile.am : Suffice to have
	  prebuilt docs in dist-ed sources only if DOC_INSTALL_DISTED_MANS is
	  enabled
	* docs/man/Makefile.am: docs/man/Makefile.am : Fix up dist-ed manpage
	  source timestamps regardless of DOC_INSTALL_DISTED_MANS value
	* docs/man/Makefile.am: docs/man/Makefile.am : Fix up manpage source
	  timestamps when dist-ing
	* docs/Makefile.am: docs/Makefile.am : make sure the builddir copy of
	  docbook-xsl.css is writeable (file is copied from OS, some distros
	  have it 444 and not 644)
	* docs/man/Makefile.am: docs/man/Makefile.am : do not rebuild docs
	  and do not error out if a prebuilt copy is among sources (not only
	  in builddir as before)
	* configure.ac, docs/man/Makefile.am: configure.ac
	  docs/man/Makefile.am : track DOC_INSTALL_DISTED_MANS fallback
	  behavior
	* configure.ac, m4/nut_check_asciidoc.m4: m4/nut_check_asciidoc.m4
	  configure.ac : parametrize the required minimum versions
	  (asciidoc/a2x, dblatex)
	* configure.ac: configure.ac : refer to detailed doc from --with-doc
	  help text; preset explicit nut_with_doc=man=auto value
	* docs/man/Makefile.am: docs/man/Makefile.am : small typo in comment
	* configure.ac: configure.ac : move comment to a more relevant line

2017-06-25  Charles Lepple <clepple+nut@gmail.com>

	* tools/gitlog2changelog.py: gitlog2changelog: log parse errors for
	  Author and Date  Suggested by Jim Klimov.
	* tools/gitlog2changelog.py: gitlog2changelog: Date header only
	  occurs at start of line  Alternative to
	  https://github.com/networkupstools/nut/pull/427

2017-06-13  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/main.c: all drivers: update inline help for '-d <count>'

2017-06-12  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/powerware-mib.c: snmp-ups: add input.bypass.frequency for
	  Eaton 3ph

2017-06-12  EVER-PowerSystems <it.support@ever.eu>

	* drivers/ever-hid.c: fixed status names, added comments, fixed
	  duplicates
	* drivers/ever-hid.c: fixed NUT names

2017-06-12  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/nutupsdrv.txt, drivers/main.c: all drivers: change
	  dump_data from flag to variable  The new option '-d dump_data' can
	  now accept the number of update loops requested as its value

2017-06-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/main.c: all drivers: add '-d' data dump option  Add '-d'
	  option to the driver-core, which causes the driver to dump the data
	  tree in upsc-like format to stdout, and exit

2017-06-09  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/nutupsdrv.txt, drivers/dstate.c, drivers/dstate.h,
	  drivers/main.c: all drivers: add '-d' data dump option  Add '-d'
	  option to the driver-core, which causes the driver to dump the data
	  tree in upsc-like format to stdout, and exit

2017-06-12  Emilien Kia (Eaton) <EmilienKia@Eaton.com>

	* docs/man/nutupsdrv.txt, drivers/main.c: Add option to run driver on
	  standalone mode. (#423)  When a driver is launched with '-s <id>'
	  instead of '-a <id>', the driver does not read ups.conf and only
	  looks for parameters on command line arguments (-x <var>=<val>). At
	  least, 'port' parameter shall be specified.

2017-06-03  Charles Lepple <clepple+nut@gmail.com>

	* drivers/belkin-hid.c: usbhid-ups: add Liebert GXT4 USB VID:PID
	  [10AF:0000]  Source: http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2017-June/010682.html  Voltage and ConfigVoltage appear to
	  be scaled improperly per the debug output.

2017-05-24  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt, drivers/eaton-mib.c, drivers/snmp-ups.c: snmp-
	  ups: add support for outlet.group phase (#422)  * snmp-ups: fix
	  oid2info value lookup  When oid2info returns NULL, don't publish
	  the variable. Previously, this was returning "UNKNOWN" which was
	  not suitable   * snmp-ups: add support for outlet.group phase
	  Outlets groups can now publish the electrical phase to which the
	  physical outlets group (Gang) is connected to. This is useful for
	  3ph ePDU

2017-05-21  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: CPS EC750G  Source:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2016-December/010461.html
	* data/driver.list.in: HCL: CPS PR2200LCDRT2U (SNMP)

2017-05-20  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Add APC Back-UPS CS; edit other APC USB
	  entries  Closes: https://github.com/networkupstools/nut/issues/365
	* data/driver.list.in: HCL: CyberPower EC350G supported by usbhid-ups
	  (v2.7.3)  Per @aurimasv on GitHub:  > Test results: Tested on
	  FreeNAS 9.10.1. Unplugged the UPS and the system > shutdown after
	  30 seconds.  Closes:
	  https://github.com/networkupstools/nut/issues/347  Also sorted CPS
	  entries.
	* data/driver.list.in: HCL: Powercool 350VA to 1600VA USB (v2.7.2+)
	  Closes: https://github.com/networkupstools/nut/issues/203
	* data/driver.list.in: HCL: Numeric Digital 800 plus works with
	  nutdrv_qx  Closes:
	  https://github.com/networkupstools/nut/issues/115 (~ 2.7.4)

2017-05-08  EVER-PowerSystems <it.support@ever.eu>

	* drivers/Makefile.am: fixed errors in makefile
	* drivers/Makefile.am, drivers/ever-hid.c, drivers/ever-hid.h,
	  drivers/usbhid-ups.c, scripts/upower/95-upower-hid.rules: add EVER
	  hid ups

2017-04-21  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: docs: build cables html documentation  Don't skip
	  cables from html documentation.

2017-04-09  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: docs/Makefile.am : typo fix not-building
	  FAQ.chunked

2017-04-21  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: docs/Makefile.am : make the working directory
	  contents writable before running a2x, so it can manage files copied
	  as read-only in earlier steps

2017-04-10  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/man/Makefile.am: Some systems detect html-
	  pages as "XML" - please them too
	* docs/man/Makefile.am: Some systems detect man-pages as "ASCII text"
	  - please them

2017-04-10  Jim Klimov <jimklimov@gmail.com>

	* docs/man/Makefile.am: Update Makefile.am  Some systems detect text
	  sources as "ISO-8859 English" text - please them.

2017-04-09  Jim Klimov <jim@jimklimov.com>

	* docs/man/Makefile.am: docs/man/Makefile.am : fix check-man-html for
	  distcheck
	* docs/man/Makefile.am: docs/man/Makefile.am : fix check-man-pages
	  for distcheck
	* docs/man/Makefile.am: docs/man/Makefile.am : fix check-man-txt for
	  distcheck
	* configure.ac, docs/Makefile.am, docs/man/Makefile.am: Add "make
	  check" for generated (or "released" pre-built) docs
	* docs/Makefile.am: docs/Makefile.am : typo fix not-building
	  FAQ.chunked
	* configure.ac: configure.ac : add --with-
	  doc(s)=all={yes,no,skip,auto} to manch e.g. man=skip etc. syntax

2017-04-05  Arnaud Quette <ArnaudQuette@Eaton.com>

	* data/driver.list.in: Add support for Eaton 9PX Split Phase 6/8/10
	  kVA  Using netxml-ups, usbhid-ups and mge-shut
	* drivers/netxml-ups.c: netxml-ups: bump driver version  In order to
	  reflect update for 2phases, bump driver version
	* drivers/dstate.c: dstate_detect_phasecount: update for 2phases
	  Update the code to be able to handle 2phases devices, also known as
	  "split phases"

2017-04-04  Arnaud Quette <ArnaudQuette@Eaton.com>

	* MAINTAINERS, data/driver.list.in, docs/man/nutupsdrv.txt,
	  drivers/Makefile.am, drivers/mge-shut.c, drivers/mge-shut.h:
	  oldmge-shut: final deprecation and removal  oldmge-shut is not
	  anymore part of the distribution, and is replaced by mge-shut

2017-04-04  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsclient.c, drivers/gamatronic.c, drivers/openups-hid.c,
	  drivers/snmp-ups.c, server/netssl.c, tools/nut-scanner/nutscan-
	  ip.c, tools/nut-scanner/nutscan-serial.c, tools/nut-
	  scanner/scan_eaton_serial.c, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_xml_http.c:
	  Cppcheck improvements (#405)  Fix all Cppcheck errors, using
	  standard c89: * Uninitialized variables, * Memory leak, * Brackets
	  balancing, * Common realloc mistake, * Possible null pointer
	  dereference, * Array index out of bounds, * Not null-terminated
	  string

2017-03-31  Nash Kaminski <nashkaminski@comcast.net>

	* docs/man/liebert-esp2.txt, docs/nut.dict, drivers/liebert-esp2.c:
	  liebert-esp2 changes: Correct battery V scaling, update docs,
	  implement split-phase unit support (#412)  * Update liebert-esp2
	  documentation, include note that port on GXT2 series does not fully
	  follow RS-232 specs.  * Refactor output format of liebert-esp2
	  driver to follow that of other drivers to fix the nut-cgi interface
	  as well as for overall consistency. Implement support for 2 phase
	  i.e. split phase input Liebert GXT2 series units. Correct battery
	  voltage scaling for GXT2 series units as well.  * Update nut.dict
	  * Update nut.dict

2017-03-30  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: Problem: NUT tests in Travis CI often wait for
	  default-withdoc  Solution in .travis.yml : since Travis cloud
	  starts the jobs as soon as it has resources, move the bulk of
	  quicker matrix jobs to start after the longest withdocs build.
	  Experimental note: we still need one job defined in the simple
	  matrix for default environment, but can keep others in a single
	  explicitly ordered list. Now the "Running for" time got cut from
	  8-9 to 5.5-6 minutes.

2017-03-29  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: docs/Makefile.am : update comment about
	  spellcheck-sortdict post-processing, to make it more relevant
	* docs/man/upsd.conf.txt, docs/nut.dict: Fix some more typos and add
	  nut.dict exceptions

2017-03-29  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/man/upsd.conf.txt: upsd.conf.txt: fix a typo from the previous
	  commit
	* conf/upsd.conf.sample, docs/man/upsd.conf.txt: upsd.conf:
	  clarification on the LISTEN directive

2017-03-22  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/libusb1.c, drivers/nut_libusb.h, tools/nut-
	  scanner/scan_usb.c: Fix spacers

2016-11-09  Charles Lepple <clepple+nut@gmail.com>

	* docs/nut-names.txt, drivers/libusb0.c, drivers/libusb1.c: Add
	  `driver.version.usb` variable  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-09-25  Charles Lepple <clepple+nut@gmail.com>

	* drivers/libusb1.c: libusb1: use return code from libusb_open()  Per
	  <http://libusb.sf.net/api-1.0/group__dev.html#ga8163100afdf933fabed
	  0db7fa81c89d1>, the handle is only populated when the return code
	  is 0.  This fixes a crash during device detection where more than
	  one HID UPS is available, and the driver needs to skip the first
	  one.

2016-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/libusb1.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c: libusb 1.0 port: fix
	  return code for interrupt ops  libusb 1.0 returns on success, the
	  number of bytes actually transferred or otherwise an error code,
	  except for interrupt transfers, where the actual transfer size is
	  stored in a separate variable. The libusb 1.0 implementation in NUT
	  thus needed to be fixed to behave the same way than the libusb 0.1
	  implementation  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0 port: remove the check on USB device
	  count  With the port to libusb 1.0, a sanity check was done on the
	  available number of USB devices to try. This however caused a
	  behavior regression, since the only device that NUT may have access
	  to can be the only UPS connected. In this case, the driver may exit
	  upon trying to reconnect if the device is transiently not available
	  Reference: https://github.com/networkupstools/nut/issues/300
	* drivers/libusb1.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  complete usb_set_altinterface code  usb_set_altinterface allows to
	  force the USB code to call `libusb_set_interface_alt_setting (0,
	  0)` (equivalent to `libusb_set_altinterface(0)` in libusb 0.1), as
	  was done in NUT 2.7.2 and earlier. However, the libusb 1.0
	  implementation was still missing the related code  Reference:
	  https://github.com/networkupstools/nut/issues/300
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  fix kernel driver detachment  Following the recent modification for
	  the kernel driver detachment, and the related functions
	  availability depending on the platforms, nutdrv_atcl_usb and
	  richcomm_usb were using the wrong macro for
	  libusb_set_auto_detach_kernel_driver and were missing the libusb
	  1.0 code for explicit kernel driver detachment  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c, m4/nut_check_libusb.m4: libusb 1.0 port: rework
	  the kernel driver detachment  libusb 1.0 has introduced a new
	  function (libusb_set_auto_detach_kernel_driver), beside from the
	  explicit kernel driver detachment request
	  (libusb_detach_kernel_driver). However, the former is not available
	  on all systems. As an example, FreeBSD 10.1-10.3 does not have
	  this. The detachment and interface claiming has been reworked to
	  handle this case (reported by Charles Lepple)  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-12  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0: remove unused typesafe_control_msg()
	  workaround  For libusb 0.1 implementation, we had to workaround a
	  libusb API goofs, by wrapping the base function usb_control_msg(),
	  and casting the variables to the right type. This is not needed for
	  libusb 1.0 implementation, but was wrongly left in the code
	  (reported by Charles Lepple)

2016-08-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: fix a warning on unused variable
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: simplify bus publication
	  bus publication was wrongly listing both the bus and the portname,
	  instead of the bus only. This may have caused some issue when
	  trying to match the port
	* drivers/usbhid-ups.c: usbhid-ups/mge-shut: rework errno/errors
	  handling  libusb 1.0 has its own set of return codes, and error
	  interface. Rework the common HID core (shared between usbhid-ups
	  and mge-shut) so that error handling can work with both, and using
	  either libusb 0.1 or 1.0 for usbhid-ups
	* tools/nut-scanner/scan_usb.c: nut-scanner: missing symbols lookup
	  for libusb 1.0  A few symbols from libusb 1.0 were wrongly used
	  directly, instead of being looked up and loaded at init time
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: add missing libusb_exit()
	  calls
	* tools/nut-scanner/nutscan-init.c, tools/nut-scanner/scan_usb.c,
	  tools/nut-usbinfo.pl: nut-scanner: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: Remove redundant
	  variable
	* drivers/tripplite_usb.c: tripplite_usb: remove extraneous comment
	  char
	* drivers/nut_libusb.h: permute typedef order of usb_dev_handle
	* drivers/nutdrv_qx.c: nutdrv_qx: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/richcomm_usb.c: richcomm_usb: missing function remap for
	  libusb 0.1  usb_strerror was not remapped for libusb 0.1
	  implementation
	* drivers/tripplite_usb.c: tripplite_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/riello_usb.c: riello_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices

2016-08-10  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/richcomm_usb.c: richcomm_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: add the missing detach
	  call  libusb 1.0 provide its own routine for detaching kernel
	  driver
	* drivers/Makefile.am, drivers/libhid.c, drivers/nut_libusb.h:
	  Forgotten occurences of libusb.h renaming  NUT internal header
	  "libusb.h" was renamed, since it collides with the libusb 1.0
	  header, which has the same name. A few occurences of reference and
	  documentation were however missing
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: initial port to libusb
	  1.0  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/blazer_usb.c: blazer_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/bcmxcp_usb.c: bcmxcp_usb: code cleanup

2016-08-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* docs/configure.txt, drivers/Makefile.am, drivers/libhid.c,
	  drivers/libhid.h, drivers/{libusb.c => libusb0.c},
	  drivers/libusb1.c, drivers/{libusb.h => nut_libusb.h}, drivers/usb-
	  common.h, drivers/usbhid-ups.c: ushid-ups: complete the port to
	  libusb 1.0  The port to libusb 1.0 is now complete for usbhid-ups.
	  Other USB drivers (bcmxcp_usb, blazer_usb, nutdrv_atcl_usb,
	  richcomm_usb, riello_usb, tripplite_usb, nutdrv_qx) have still to
	  be addressed

2016-08-01  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, m4/nut_check_libusb.m4: Initial port to libusb 1.0
	  Starting with the configure checks, to detect if libusb 1.0 if
	  available, and otherwise fall back to the libusb 0.1 backend

2017-03-22  Arnaud Quette <ArnaudQuette@Eaton.com>

	* clients/upssched-cmd, conf/upssched.conf.sample.in: upssched: align
	  documentation and sample files  Align documentation and sample
	  configuration and script, so that the whole is more coherent

2017-03-21  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/scheduling.txt: upssched: some clarification on TIMER

2017-03-20  Charles Lepple <clepple+git@gmail.com>

	* docs/nut.dict: Re-sort nut.dict (#406)  * Re-sort nut.dict  *
	  nut.dict header line

2017-03-13  Spiros Ioannou <sivann@inaccess.com>

	* configure.ac, data/driver.list.in, docs/man/Makefile.am,
	  docs/man/index.txt, docs/man/phoenixcontact_modbus.txt,
	  docs/nut.dict, drivers/Makefile.am,
	  drivers/phoenixcontact_modbus.c, m4/nut_check_libmodbus.m4:
	  phoenixcontact_modbus driver  Closes:
	  https://github.com/networkupstools/nut/pull/404

2017-03-14  Spiros Ioannou <sivann@inaccess.com>

	* .travis.yml: added libmodbus-dev to travis configuration

2017-03-15  Jim Klimov <jim@jimklimov.com>

	* docs/config-notes.txt: config-notes.txt : small clarifications in
	  the text
	* docs/developers.txt: developers.txt : small clarifications in the
	  text and line-wrapping and backticks
	* docs/config-notes.txt: config-notes.txt : small clarifications in
	  the text and line-wrapping
	* docs/cables.txt: cables.txt : line-wrapping
	* docs/asciidoc.txt: asciidoc.txt : line-wrapping
	* docs/acknowledgements.txt: acknowledgements.txt : line-wrapping
	* docs/support.txt: support.txt : small clarifications in the text
	  and line-wrapping
	* docs/security.txt: security.txt : small clarifications in the text
	  and line-wrapping
	* docs/outlets.txt: outlets.txt : line-wrapping
	* docs/new-drivers.txt: new-drivers.txt : line-wrapping
	* docs/net-protocol.txt: net-protocol.txt : line-wrapping
	* docs/maintainer-guide.txt: maintainer-guide.txt : small
	  clarifications in the text and line-wrapping and backticks
	* docs/macros.txt: macros.txt : line-wrapping
	* docs/history.txt: history.txt : line-wrapping
	* docs/features.txt: features.txt : small clarifications in the text
	  and line-wrapping and backticks
	* docs/download.txt: download.txt : line-wrapping
	* docs/developers.txt: developers.txt : small clarifications in the
	  text and line-wrapping and backticks
	* docs/daisychain.txt: daisychain.txt : small clarifications in the
	  text and line-wrapping
	* docs/configure.txt: configure.txt : small clarifications in the
	  text
	* docs/config-notes.txt: config-notes.txt : small clarifications in
	  the text
	* docs/acknowledgements.txt: acknowledgements.txt : small
	  clarifications in the text
	* docs/FAQ.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx-
	  subdrivers.txt : small clarifications in the text

2017-03-13  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict : add "distros" slangey
	* docs/configure.txt, docs/contact-closure.txt, docs/daisychain.txt,
	  docs/developers.txt, docs/features.txt, docs/history.txt, docs/net-
	  protocol.txt, docs/new-drivers.txt, docs/nut-names.txt, docs/nut-
	  qa.txt, docs/nutdrv_qx-subdrivers.txt, docs/outlets.txt, docs/sock-
	  protocol.txt: docs/*.txt : cleanup long-dash (use double-minus)
	* docs/acknowledgements.txt, docs/cables.txt, docs/configure.txt,
	  docs/contact-closure.txt, docs/design.txt, docs/developer-
	  guide.txt, docs/developers.txt, docs/documentation.txt,
	  docs/download.txt, docs/features.txt, docs/hid-subdrivers.txt,
	  docs/history.txt, docs/macros.txt, docs/maintainer-guide.txt,
	  docs/net-protocol.txt, docs/new-clients.txt, docs/new-drivers.txt,
	  docs/nut-names.txt, docs/nut-qa.txt, docs/outlets.txt,
	  docs/packager-guide.txt, docs/snmp-subdrivers.txt, docs/snmp.txt,
	  docs/sock-protocol.txt, docs/support.txt, docs/user-manual.txt:
	  docs/*.txt : cleanup trailing whitespace

2017-03-13  Arnaud Quette <ArnaudQuette@Eaton.com>

	* scripts/systemd/nutshutdown.in: Prefer @CONFPATH@ over @sysconfdir@
	  Otherwise, the generated nutshutdown script can end up with a non
	  fully expanded path like "${prefix}/etc/nut.conf" when not
	  specifying --sysconfdir and using default flags

2017-01-28  Laurent Bigonville <bigon@bigon.be>

	* scripts/systemd/nutshutdown.in: Add support for POWEROFF_WAIT
	  parameter  Use "systemctl reboot --force --force" to reboot the
	  machine has not been shutdown after the POWEROFF_WAIT delay.
	  Closes: #382

2017-03-04  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: snmp-ups.c : presumed typo fix : NUT var for
	  bypass mapping is "input.bypass" (fix the caller too)

2017-03-15  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: nut.dict : know of "nowait"

2017-01-28  Jim Klimov <jim@jimklimov.com>

	* docs/man/ups.conf.txt, docs/man/upsdrvctl.txt, drivers/upsdrvctl.c:
	  From: Arnaud Quette <arnaud.quette@free.fr> Date: Sat, 7 Jun 2014
	  02:27:15 +0200 Subject: [PATCH] Add 'nowait' option for upsdrvctl
	  in ups.conf  The nowait flag allow to tell upsdrvctl to not wait at
	  all for the driver(s) to execute the request command. The default
	  behavior, when this variable is omitted, is to wait 'maxstartdelay'
	  seconds

2017-03-13  Arnaud Quette <ArnaudQuette@Eaton.com>

	* scripts/systemd/nutshutdown.in: Prefer @CONFPATH@ over @sysconfdir@
	  Otherwise, the generated nutshutdown script can end up with a non
	  fully expanded path like "${prefix}/etc/nut.conf" when not
	  specifying --sysconfdir and using default flags
	* docs/scheduling.txt: Disambiguate FHS - Filesystem Hierarchy
	  Standard
	* docs/security.txt: Missing space

2017-03-13  Jim Klimov <jim@jimklimov.com>

	* docs/FAQ.txt, docs/config-notes.txt, docs/scheduling.txt,
	  docs/security.txt: Some docs/ files revised to backtick pathnames,
	  clean up trailing whitespace, and use double-minuses for long-dash
	  in sentences
	* docs/nut.dict: docs/nut.dict : add "FHS"

2017-03-04  Arnaud Quette <ArnaudQuette@Eaton.com>

	* docs/FAQ.txt, docs/config-notes.txt, docs/scheduling.txt,
	  docs/security.txt: Try to adapt paths in documentation
	  Documentation still widely uses the default paths source when
	  compiled from source. While it is feasible to adapt some at
	  compilation time, it is not desirable since, for example, the
	  online documentation on networkupstools.org has to be generic. So
	  try to make these paths more generic when possible, and otherwise
	  make a note

2017-03-04  Jim Klimov <jim@jimklimov.com>

	* docs/hid-subdrivers.txt, docs/nut.dict: spellcheck: "futher" is a
	  mistaken exception in custom dictionary
	* docs/nut.dict: nut.dict bumped to support nut-website documents
	  with words that Travis does not know
	* drivers/snmp-ups.c: snmp-ups.c : presumed typo fix : NUT var for
	  bypass mapping is "input.bypass" (fix the caller too)
	* docs/nut.dict: nut.dict bumped to support nut-website documents
	  with words that Travis does not know
	* docs/nut.dict: nut.dict bumped to support nut-website documents

2017-03-02  Arnaud Quette <ArnaudQuette@Eaton.com>

	* tools/nut-ddl-dump.sh: nut-ddl-dump.sh: various improvements
	  Improve the script to generate NUT device dumps by adding: * a
	  header line that mentions the generation source (automatic) and
	  date * add upsrw dump as comments * add upscmd dump as comments
	* drivers/eaton-ats16-mib.c: snmp-ups: ATS16 fixes for ambient sensor
	  values  Values for the attached ambient sensor to an ATS16 were
	  erroneously multiplied by 10

2017-03-01  Jim Klimov <jimklimov@gmail.com>

	* drivers/mge-xml.c: Update mge-xml.c  Include drivers/main.h to get
	  testvar() declared properly

2017-03-01  Jim Klimov <jim@jimklimov.com>

	* docs/man/upscli_init.txt: docs/man/upscli_init.txt : rephrase the
	  text to pass spellcheck (and human readability) and wrap some long
	  lines
	* drivers/snmp-ups.c: snmp-ups.c : presumed typo fix : NUT var for
	  bypass mapping is "input.bypass"
	* drivers/snmp-ups.c: snmp-ups.c : added comments about some
	  daisychain global vars

2017-02-28  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: drivers/snmp-ups.c : in snmp_ups_walk(), report
	  in log if aborting because of exit_flag
	* drivers/snmp-ups.c: drivers/snmp-ups.c : in snmp_ups_walk(), update
	  some comments
	* drivers/snmp-ups.c: drivers/snmp-ups.c : presumed typo fix in
	  comment about daisy (should be "1..N" not "2..N" in final code)
	* drivers/snmp-ups.c: drivers/snmp-ups.c : comment in snmp_ups_walk()
	  about daisychains vs unitary devices
	* drivers/snmp-ups.c: drivers/snmp-ups.c : comment in snmp_ups_walk()
	  about daisychains vs unitary devices
	* drivers/snmp-ups.c: drivers/snmp-ups.c : fix trailing whitespace
	* drivers/dstate.c, drivers/dstate.h, drivers/usbhid-ups.h:
	  drivers/dstate.c : in dstate_detect_phasecount() do not hardcode a
	  buf[] size but use a macro
	* drivers/dstate.c: drivers/dstate.c : extend a comment about 2-phase
	  devices into dstate_detect_phasecount()

2017-02-12  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: dstate.c : catch a few more zero value
	  representation and comment about others

2017-02-10  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c: dstate.c : refactor dstate_detect_phasecount() :
	  change the report about calculated values to use common format with
	  __func__
	* drivers/dstate.c: dstate.c : refactor dstate_detect_phasecount() :
	  change the no-longer-sexy overgrown one-liners with a readable
	  macro
	* drivers/dstate.c: dstate.c : important typo fixed for
	  dstate_detect_phasecount()
	* drivers/dstate.c: dstate.c : revise comment for
	  dstate_detect_phasecount()
	* drivers/dstate.c: dstate.c : address code style (move var
	  declarations to top of scope)
	* drivers/dstate.c: dstate.c : address some nit-picks

2017-02-09  Jim Klimov <jim@jimklimov.com>

	* drivers/dstate.c, drivers/dstate.h, drivers/mge-xml.c: Refactor
	  dstate_detect_phasecount(), adding a read-only mode (so the caller
	  can query the guesswork logic without changing active dstates)
	* drivers/dstate.c, drivers/dstate.h, drivers/mge-xml.c: Refactor the
	  dstate guesswork and setting for 1/3 phases, move it to common
	  dstate.c/.h and rename to dstate_detect_phasecount()
	* drivers/mge-xml.c: Refactor recent logic into a common
	  set_phasecount()
	* drivers/mge-xml.c: Drop an empty line
	* drivers/mge-xml.c: mge-xml.c : calculate
	  (input|bypass|output).phases number (1 or 3) based on available
	  non-zero measurements - typo fix for "INPUT.bypass."
	* drivers/mge-xml.c: mge-xml.c : calculate
	  (input|bypass|output).phases number (1 or 3) based on available
	  non-zero measurements - consider absence of Lx values for 1-phase
	  case
	* drivers/mge-xml.c: mge-xml.c : calculate
	  (input|bypass|output).phases number (1 or 3) based on available
	  non-zero measurements - also consider current (amps)
	* drivers/mge-xml.c: mge-xml.c : calculate
	  (input|bypass|output).phases number (1 or 3) based on available
	  non-zero measurements

2017-02-28  Jim Klimov <jim@jimklimov.com>

	* docs/man/netxml-ups.txt, drivers/mge-xml.c, drivers/netxml-ups.c:
	  mge-xml / netxml-ups : reimplement do_convert_deci as a simple
	  VAR_FLAG setting

2017-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-xml.c: mge-xml.c : add debug logging of values which
	  were converted
	* docs/man/netxml-ups.txt, docs/nut.dict, drivers/mge-xml.c,
	  drivers/netxml-ups.c: netxml-ups and mge-xml : allow users to
	  reenable legacy convert_deci() behavior at run-time, with a
	  configuration toggle (documented)
	* drivers/mge-xml.c: mge-xml.c : updated comment about convert_deci()
	  pre-history

2017-02-21  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-xml.c: drivers/mge-xml.c : when reporting deprecation
	  of convert_deci(), do it once visibly with details like issue
	  tracker URL, and in regular debug messages refer to that line

2017-02-20  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-xml.c: drivers/mge-xml.c : in convert_deci() now report
	  it is deprecated (with debug level 5) so we get reports if
	  deprecation bites anyone in reality
	* drivers/mge-xml.c: drivers/mge-xml.c : bump subdriver version
	* drivers/mge-xml.c: drivers/mge-xml.c : bump copyrights

2017-02-18  Jim Klimov <jimklimov@gmail.com>

	* drivers/mge-xml.c: Disable convert_deci() that was needed a decade
	  ago  Left the old code in place, commented away. If devices with
	  old NetXML pop up (those which served in XML 10x the measured
	  value), fixes can be applied based on voltage and amps and power
	  (order of magnitude comparison), or perhaps model names and/or
	  firmware versions or release dates, if we get those.

2017-02-27  Jim Klimov <jim@jimklimov.com>

	* drivers/netxml-ups.c: netxml-ups.c : typo fix (shutdwon =>
	  shutdown)
	* docs/man/netxml-ups.txt: docs/man/netxml-ups.txt : trailing
	  whitespace fixes

2017-02-28  Jim Klimov <jim@jimklimov.com>

	* data/Makefile.am: data/Makefile.am : did not link back to
	  "spellcheck-sortdict"

2017-02-04  Steven Bell <stv.bell07@gmail.com>

	* docs/nut.dict: Removed line left over from merge conflict. Ooops!

2017-01-28  Laurent Bigonville <bigon@bigon.be>

	* scripts/systemd/nutshutdown.in: Add support for POWEROFF_WAIT
	  parameter  Use "systemctl reboot --force --force" to reboot the
	  machine has not been shutdown after the POWEROFF_WAIT delay.
	  Closes: #382

2017-01-28  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-ats30-mib.c: drivers/eaton-ats30-mib.c : fix
	  whitespace
	* drivers/snmp-ups.c: drivers/snmp-ups.c : fix trailing whitespaces
	* docs/nut.dict: nut.dict : know of "nowait"
	* docs/Makefile.am: docs/Makefile.am : after spellcheck-interactive,
	  advise how to review the dictionary changes and avoid regressions
	* conf/upsd.conf.sample, conf/upsmon.conf.sample.in,
	  conf/upssched.conf.sample.in, docs/nut.dict: Spellchecked the conf/
	  sample files
	* Makefile.am, conf/Makefile.am: Spellcheck the conf/ directory
	* conf/upsd.users.sample, conf/upsmon.conf.sample.in:
	  upsmon.conf.sample.in : clarify nuances of master/slave systems,
	  and special use-cases of SHUTDOWNCMD and powervalue==0
	* conf/hosts.conf.sample, conf/nut.conf.sample, conf/ups.conf.sample,
	  conf/upsd.conf.sample, conf/upsd.users.sample,
	  conf/upsmon.conf.sample.in, conf/upssched.conf.sample.in,
	  conf/upsset.conf.sample, conf/upsstats.html.sample: Sample
	  configuration files : fix leading and trailing whitespace (mix of
	  tab/space)
	* conf/ups.conf.sample: ups.conf.sample : move maxretry example
	  higher in the file so it is before driver-block examples
	* drivers/apc-pdu-mib.c: Date:   Fri Aug 19 02:43:44 2016 +0200  apc-
	  pdu-mib.c fixes : * added trailing NULLs for proper structure size;
	  * fixed some items' flags; * fixed whitespace; * bumped MIBmap
	  version
	* data/driver.list.in, drivers/Makefile.am, drivers/apc-pdu-mib.c,
	  drivers/apc-pdu-mib.h, drivers/snmp-ups.c: From: Arnaud Quette
	  <arnaud.quette@free.fr> Date: Fri, 8 Apr 2016 14:40:00 +0200
	  Subject: [PATCH] snmp-ups: support APC PDU  Based on initial work
	  and data from Opengear, using SNMP subdriver creation script, add
	  support for the more recent APC PDU.  This was tested with a
	  AP8958, but should cover other models
	* docs/man/ups.conf.txt, docs/man/upsdrvctl.txt, drivers/upsdrvctl.c:
	  From: Arnaud Quette <arnaud.quette@free.fr> Date: Sat, 7 Jun 2014
	  02:27:15 +0200 Subject: [PATCH] Add 'nowait' option for upsdrvctl
	  in ups.conf  The nowait flag allow to tell upsdrvctl to not wait at
	  all for the driver(s) to execute the request command. The default
	  behavior, when this variable is omitted, is to wait 'maxstartdelay'
	  seconds
	* conf/ups.conf.sample: Document and pre-set the "maxretry" option in
	  ups.conf.sample

2017-01-27  Jim Klimov <jim@jimklimov.com>

	* drivers/eaton-ats16-mib.c, drivers/eaton-ats30-mib.c: Prefix
	  structures in eaton-atsXY-mib.c files with an eaton_atsXY rather
	  than just atsXY
	* README: README: not asciidoc, and redistributed - do not link to
	  volatile build status

2017-01-27  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/snmp-ups.c: snmp-ups: Fix counter OID matching  In case of
	  multiple similar sysOID (i.e. same sysOID in different subdrivers),
	  there is a counter matching OID (generally using the model OID).
	  However, the matching was causing a crash of snmp-ups in case where
	  it was not the right MIB mapping and the OID for model entry was
	  not available

2017-01-27  Steven Bell <stv.bell07@gmail.com>

	* docs/man/upscli_connect.txt, docs/nut.dict: Fixed issues with
	  documentation for automated spellcheck during CI check.

2017-01-27  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict : sorted to facilitate further
	  maintenance

2017-01-27  Arnaud Quette <ArnaudQuette@Eaton.com>

	* Makefile.am, data/Makefile.am, data/cmdvartab: Integrate cmdvartab
	  to the spellcheck target  This also includes 2 spelling fixes

2017-01-27  Jim Klimov <jim@jimklimov.com>

	* NEWS, docs/nut.dict: Spellcheck : Fixed typo in Tore O*r*petveit's
	  name
	* README: README : embed a Travis status image link for NUT Master
	  branch
	* Makefile.am, docs/.gitignore, docs/Makefile.am,
	  docs/man/Makefile.am: Spellcheck : add a recipe to keep nut.dict
	  sorted so git diffs are clearer
	* Makefile.am: Makefile.am : when calling spellcheck or spellcheck-
	  interactive for several subdirs, do not stop after the first failed
	  sub-make

2017-01-27  Steven Bell <stv.bell07@gmail.com>

	* docs/man/upscli_add_host_cert.txt, docs/man/upscli_connect.txt,
	  docs/man/upscli_init.txt: Updated and corrected documentation.

2017-01-27  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/Makefile.am, drivers/eaton-ats16-mib.c, drivers/eaton-
	  ats16-mib.h, drivers/snmp-ups.c: snmp-ups: rename Eaton ATS16
	  resources  Rename the subdriver files along with the structure and
	  entries, to make a clear difference with the newly added
	  eaton_ats30. This completes the previous commit, where some files
	  was erroneously committed
	* drivers/{eaton-ats-mib.c => eaton-ats16-mib.c}, drivers/{eaton-ats-
	  mib.h => eaton-ats16-mib.h}, drivers/eaton-ats30-mib.c: Fix
	  unterminated comment, from previous commit
	* tools/nut-scanner/scan_snmp.c: nut-scanner: force numeric
	  resolution of OIDs  As done in snmp-ups, force the numeric
	  resolution of OIDs, to ensure correct OID matching in all cases
	* drivers/snmp-ups.c: Only free variable when needed in
	  su_setvar/su_setOID  Previously, we tried to free temporary
	  pointers in all cases. However, this pointer may ever point at the
	  static structure, in case we do not need to instantiate variable
	  (outlet.* collection), and which causes a crash of the driver
	* drivers/eaton-ats30-mib.c: Add a comment on the unused OIDs
	* drivers/snmp-ups.c: Fix spacing
	* drivers/eaton-ats30-mib.c, drivers/eaton-ats30-mib.h: Fix legal
	  information

2017-01-26  Tomas Halman <TomasHalman@eaton.com>

	* drivers/Makefile.am, drivers/eaton-ats30-mib.c, drivers/eaton-
	  ats30-mib.h, drivers/snmp-ups.c: snmp-ups: support Eaton Automatic
	  Transfer Switch ATS30  ATS30 MIB differs from previously integrated
	  EATON ATS driver.

2016-09-14  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : revised upsdebugx() and upslogx() calls
	  to not trail an extra newline
	* common/common.c, configure.ac: Add support for system library
	  directories with names based on short target/build/host OS spec too

2017-01-24  Jim Klimov <jim@jimklimov.com>

	* common/common.c, configure.ac: Add support for system library
	  directories with names based on target/build/host OS spec (for GCC
	  at least)

2016-09-14  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : added logging and small optimizations
	  during get_libname()
	* common/common.c: common.c : add /usr/local/lib64 to search path

2017-01-19  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-init.c: nutscan-init.c : We can also use
	  libusb-compat from newer libusb-1.0 releases (issue #361)

2016-09-14  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nutscan-init.c: nut-scanner : support libneon-
	  gnutls.so as an alternative name

2016-07-12  Carlos Dominguez <cdominguezm@gmail.com>

	* common/common.c, include/common.h, tools/nut-scanner/nutscan-
	  init.c: Arnaud's patch applied, dynamic library bug fixed, tested!

2016-07-04  Arnaud Quette <arnaud.quette@free.fr>

	* common/common.c, include/common.h, tools/nut-scanner/nutscan-
	  init.c: Move get_libname() to common  This function, originally
	  created for nut-scanner, to be able to lookup for libraries loaded
	  using libtool loader, is now also useful for the DMF support. This
	  last loads libneon at runtime, to load DMF structure (including the
	  one for nut-scanner) and unload it once the file were read

2017-01-23  Jim Klimov <jim@jimklimov.com>

	* drivers/mge-hid.c, drivers/nutdrv_qx.h,
	  drivers/nutdrv_qx_bestups.c: Fix the non-ASCII quote character away
	  from C sources
	* docs/daisychain.txt, docs/man/al175.txt, docs/man/apcsmart.txt,
	  docs/man/apcupsd-ups.txt, docs/man/bcmxcp_usb.txt,
	  docs/man/bestups.txt, docs/man/blazer-common.txt,
	  docs/man/clone.txt, docs/man/libnutclient_commands.txt,
	  docs/man/libnutclient_misc.txt, docs/man/libnutclient_tcp.txt,
	  docs/man/libnutclient_variables.txt, docs/man/macosx-ups.txt,
	  docs/man/mge-shut.txt, docs/man/nut-scanner.txt,
	  docs/man/nutdrv_qx.txt, docs/man/nutscan_add_device_to_device.txt,
	  docs/man/nutscan_add_option_to_device.txt,
	  docs/man/nutscan_cidr_to_ip.txt,
	  docs/man/nutscan_get_serial_ports_list.txt, docs/man/nutupsdrv.txt,
	  docs/man/skel.txt, docs/man/snmp-ups.txt, docs/man/solis.txt,
	  docs/man/ups.conf.txt, docs/man/upscode2.txt,
	  docs/man/upsd.conf.txt, docs/man/upsd.txt,
	  docs/man/upsmon.conf.txt, docs/man/upsmon.txt, docs/man/upsrw.txt,
	  docs/man/upssched.conf.txt, docs/man/upsstats.html.txt,
	  docs/man/usbhid-ups.txt, docs/nut.dict: Update nut.dict and manpage
	  sources after initial spellchecking integration
	* Makefile.am, ci_build.sh, docs/man/Makefile.am:
	  docs/man/Makefile.am : track all manpage sources in a separate
	  variable and use that for spellchecker
	* docs/Makefile.am: docs/Makefile.am : add daisychain to ALL_TXT_SRC
	* docs/Makefile.am: docs/Makefile.am : revised TODOs for spellchecker

2017-01-20  Jim Klimov <jimklimov@gmail.com>

	* .travis.yml: Enable valgrind in travis matrix

2017-01-21  Jim Klimov <jim@jimklimov.com>

	* indent.sh: Initial commit of indent.sh helper

2017-01-20  Jim Klimov <jim@jimklimov.com>

	* Makefile.am, tests/Makefile.am: VALGRIND: abuse distcheck to run
	  tested programs in debug mode under valgrind
	* configure.ac: valgrind config fix
	* ci_build.sh: Travis : make spellcheck failures fatal now
	* docs/nut.dict: docs/nut.dict : add another word missed by earlier
	  private dict
	* docs/nut.dict: docs/nut.dict : try to enable UTF8 contributor names
	* docs/Makefile.am: docs/Makefile.am : try to enable UTF8 in args and
	  env
	* .travis.yml, ci_build.sh: Travis : enable i2c tests
	* .travis.yml: .travis.yml : rearrange apt deps and special case for
	  doc/spell tests in the matrix
	* .travis.yml, ci_build.sh: Travis: port the test-script structure
	  from DMF brach (better case than if)

2017-01-19  Jim Klimov <jim@jimklimov.com>

	* docs/nut.dict: docs/nut.dict : add some words not in dictionaries
	  available to Travis CI; add some developer names to the dictionary
	* NEWS, TODO, UPGRADING, common/parseconf.c, docs/FAQ.txt,
	  docs/acknowledgements.txt, docs/cables/sms.txt, docs/config-
	  notes.txt, docs/download.txt, docs/hid-subdrivers.txt, docs/new-
	  drivers.txt, docs/nut-qa.txt, docs/nut.dict, docs/nutdrv_qx-
	  subdrivers.txt, docs/packager-guide.txt, docs/snmp-subdrivers.txt,
	  lib/README, scripts/augeas/README: Spellchecker : Fix or rephrase
	  issues found by spellchecker, and update the NUT custom dictionary
	* docs/developers.txt: docs/developers.txt : fix non-ASCII tick
	  character
	* docs/acknowledgements.txt, docs/packager-guide.txt: Added myself to
	  docs/acknowledgements.txt docs/packager-guide.txt
	* docs/nut-qa.txt: docs/nut-qa.txt : rearranged the paragraph with CI
	  (to fit in 80 cols) and added link to Travis CI dashboard for NUT
	  branches
	* docs/packager-guide.txt: docs/packager-guide.txt : rearranged the
	  paragraph with recommended package description (to fit in 80 cols)
	* docs/developers.txt: docs/developers.txt : mention the recently
	  added Travis CI integration
	* docs/developers.txt: docs/developers.txt : reformat the paragraph
	  on distcheck-light, and mention the recently added option to skip
	  building docs
	* Makefile.am: Makefile.am : allow to call from workspace root the
	  docs/Makefile for targets: spellcheck spellcheck-interactive doc

2017-01-19  Jim Klimov <jimklimov@gmail.com>

	* docs/Makefile.am: docs/Makefile.am : parametrize aspell common
	  args; add togglable debugging of aspell setup

2017-01-19  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh, docs/Makefile.am: docs/Makefile.am + Travis : support
	  a SPELLCHECK_ERROR_FATAL toggle, and use it from Travis for now  *
	  docs/Makefile.am : also report if the build succeeds despite
	  spellcheck errors (due to this setting)
	* docs/Makefile.am: docs/Makefile.am : name the en lang explicitly
	* docs/Makefile.am: docs/Makefile.am : big reorganization of
	  spellcheck  * spellcheck targets should fail the build not only if
	  the last document failed the test * make sure to use custom
	  spellcheck dictionary from NUT source tree; revise erroring out if
	  automatic aspell finds issues * also set LC_ALL=C for aspell *
	  revised spellcheck failure message to suggest next steps for the
	  human * comment the spellcheck test; use more portable shell test
	  (instead of bracket); do not fail on empty aspell outputs

2016-09-07  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : add potential usage of valgrind,
	  optional and configurable/detectable

2017-01-19  Jim Klimov <jim@jimklimov.com>

	* .travis.yml, ci_build.sh: Travis CI should call spellcheck as a
	  separate spellchecking job (parallelize, optimize for speed,
	  separate error causes/reports)
	* .travis.yml: .travis.yml : add libcppunit to travis env, so tests
	  in NUT will be enabled

2017-01-11  Jim Klimov <jim@jimklimov.com>

	* .travis.yml: .travis.yml : drop comment for PR #354

2016-11-21  Jim Klimov <jim@jimklimov.com>

	* common/snprintf.c: common/snprintf.c : avoid a few compilation
	  warnings and a possible crash due to padded ints in variadic
	  functions
	* common/snprintf.c, configure.ac: common/snprintf.c and configure.ac
	  : avoid a few compilation warnings

2017-01-06  Daniele Pezzini <hyouko@gmail.com>

	* common/state.c: state: consider also ST_FLAG_NUMBER flags
	* drivers/dstate.c: dstate: report ST_FLAG_NUMBERs also in response
	  to a DUMPALL request
	* drivers/dstate.c: dstate: when dealing with ranges, don't lose
	  already-set flags  Ranges are now explicitly flagged as numbers,
	  but the use of dstate_setflags() means that we substitute any
	  previously-set flag with the ones we pass to that function, losing,
	  for example, an already-set r/w status, with the result of making
	  an affected var unchangeable. Use instead the newly added
	  dstate_addflags() function, which preserves already-set flags.
	* drivers/dstate.c, drivers/dstate.h: dstate: add a couple of
	  functions to ease the manipulation of flags

2017-01-10  Arnaud Quette <ArnaudQuette@Eaton.com>

	* drivers/snmp-ups.c: snmp-ups: fix device.type setting in daisychain
	  mode  device.type was not set due to a coding error, but pushed to
	  device.model (reported by Evgeny "Jim" Klimov from Eaton)
	* drivers/main.c: drivers: set the default device.type even earlier
	  device.type default setting to "ups" has to be done prior to the
	  initups() call, otherwise some devices (such as daisychained PDUs)
	  will not be able to override it

2017-01-04  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh : list contents of installation directory
	* ci_build.sh: ci_build.sh : fix installation directories for /etc
	  and udev, devd and hotplug (not hardcoded root paths)
	* ci_build.sh: ci_build.sh : list contents of installation directory
	* ci_build.sh: ci_build.sh : fix installation directories for /etc
	  and udev, devd and hotplug (not hardcoded root paths)
	* .travis.yml, ci_build.sh: Travis : take advantage of "--with-
	  doc=skip" support recently added in configure and Makefiles

2016-09-13  Jim Klimov <jim@jimklimov.com>

	* configure.ac, docs/man/Makefile.am: configure.ac,
	  docs/man/Makefile.am - support SKIP_MANS as an explicit non-fatal
	  situation

2017-01-04  Jim Klimov <jim@jimklimov.com>

	* ci_build.sh: ci_build.sh : comment about missing i2c
	* ci_build.sh: ci_build.sh : generalize the skipping of distcheck and
	  make it more comprehensible in script code
	* .travis.yml: .travis.yml : include the headers needed for i2c
	* .travis.yml: .travis.yml : use specific libgd
	* .travis.yml: .travis.yml : add graphics pkgs for CGI builds
	* ci_build.sh: .travis.yml / ci_build.sh : speed up with parallel
	  build (fall back to sequential if this fails)
	* .travis.yml, ci_build.sh: .travis.yml / ci_build.sh : current NUT
	  does not skip docs safely, so enable just manpages in default build
	* .travis.yml: .travis.yml : add libipmimonitoring packages too
	* .travis.yml: .travis.yml : older freeipmi in Travis Ubuntu 12.04.5
	* ci_build.sh: ci_build.sh : fix the doc-skipping option
	* .travis.yml: .travis.yml : apparently, libfreeipmi16 pkg requires
	  extra invitation
	* .travis.yml, ci_build.sh: Travis : require docs tools only for
	  "default-withdoc" builds; change "default" to skip the docs (and
	  try to pass distcheck)
	* .travis.yml: .travis.yml : only define default-alldrv once
	* .travis.yml, ci_build.sh: Initial integration of a travis matrix
	  build (different scenarios)
	* .gitignore, .travis.yml, ci_build.sh, docs/Makefile.am: Initial
	  commits of config and script files for Travis CI automatic
	  validation (simply do a compile and distcheck)

2017-01-04  Arnaud Quette <ArnaudQuette@Eaton.com>

	* m4/nut_check_asciidoc.m4: Minor typo fixes

2017-01-04  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : switch default option to "--with-
	  doc=man=auto" so ordinary builds succeed by default on any system
	* configure.ac: configure.ac alias
	* configure.ac: configure.ac : add the "--with-docs" as alias to "--
	  with-doc"
	* configure.ac, m4/ax_compare_version.m4, m4/nut_check_asciidoc.m4:
	  Refactor nut_check_asciidoc.m4 and configure.ac to check all doc-
	  tools in one place (and also only once), and fix comments and some
	  coding issues

2016-12-29  Charles Lepple <clepple+nut@gmail.com>

	* docs/new-drivers.txt: docs: reword/reformat new-drivers.txt
	  Distinguish HID PDC from Q*, etc.

2016-11-29  Florian Bruhin <git@the-compiler.org>

	* tools/gitlog2changelog.py: Fix gitlog2changelog.py on python 3
	* scripts/augeas/gen-nutupsconf-aug.py: Make gen-nutupsconf-aug.py
	  work with Python 3  This makes the script work with Python 2.6+.
	  Fixes #345.

2016-11-28  Daniele Pezzini <hyouko@gmail.com>

	* configure.ac: configure: fix checks for a2x-built docs  Since,
	  starting from commit d4a55ed, we now check that documents are
	  buildable in an 'external' directory, we need to call a2x with '--
	  destination-dir' pointing to that directory, otherwise a2x will put
	  the generated documents in the same directory where source files
	  are and then testing the non-existent files under our 'external'
	  directory will always fail, meaning that we will never pass these
	  checks.

2016-11-21  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am: EXTRA_DIST the docs/asciidoc.txt as used in
	  configure script checks
	* configure.ac: configure.ac : avoid nonportable "mktemp --tmpdir"
	  option

2016-11-17  Michal Soltys <soltys@ziu.info>

	* autogen.sh: autogen.sh: minor script fixup  In case any of the perl
	  / python parts fails (for example if system default is python3, the
	  script will complain about print), cd ../.. won't be executed.
	  Furthermore - if any of those scripts fail, there's no point in
	  continuing as both files are mandatory.
	* docs/man/apcsmart.txt, drivers/apcsmart.c, drivers/apcsmart.h:
	  apcsmart: CS "hack" updates  This patch adds cshdelay option (with
	  default set to 3.5s) between "simulate power failure" and "soft
	  hibernate" commands.

2016-11-16  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: sbhid-ups: fix Eaton/MGE mapping for beeper
	  handling  Two HID Paths exists for handling beeper status and
	  commands. However, only one historic was implement, which was not
	  actually suitable for issuing the commands on newer units (such as
	  3S, 5P*, ...) (reported by Sergey Talchuk)  Closes:
	  https://github.com/networkupstools/nut/issues/9
	* drivers/usbhid-ups.c: usbhid-ups: adjust debuging info

2016-11-09  Charles Lepple <clepple+nut@gmail.com>

	* docs/nut-names.txt, drivers/libusb0.c, drivers/libusb1.c: Add
	  `driver.version.usb` variable  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-11-03  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: CP1500EPFCLCD  Source:
	  https://github.com/networkupstools/nut/issues/337

2016-11-02  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Eaton 5E2200VA  Reference:
	  https://github.com/networkupstools/nut/issues/335
	* data/driver.list.in: HCL: Eaton Ellipse PRO 650 VA (USB) supported
	  by usbhid-ups  Closes:
	  https://github.com/networkupstools/nut/issues/255

2016-10-21  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: download.txt: Add Slackware link

2016-10-12  Kirill Ovchinnikov <ovchinnikov@ians.aero>

	* drivers/apc-mib.c, drivers/snmp-ups.c: apc-mib.c modified for
	  ups.delay.{start,shutdown} to include SU_TYPE_TIME

2016-10-11  Yann E. MORIN <yann.morin.1998@free.fr>

	* clients/upsclient.c: client/ups: add missing include  struct
	  timeval is declared in sys/time.h, so we need to #include it.

2016-10-11  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c:
	  Remove unimplement nut-scanner option  The -F --fingerprints-file
	  option, used to provide an additional list of SNMP fingerprints,
	  was never implemented, but made its way into the code. Remove it,
	  at least while waiting for an actual implementation
	* docs/man/nut-scanner.txt: Update nut-scanner manual page
	* tools/nut-scanner/nutscan-device.c, tools/nut-
	  scanner/scan_xml_http.c: Fix c++ style comments

2016-04-03  Alica <alicaccs@yahoo.com.tw>

	* conf/upsstats.html.sample: upsstats.html: Conform to HTML 4.01
	  Strict  Closes: https://github.com/networkupstools/nut/pull/278
	* conf/upsstats-single.html.sample: upsstats-single.html: Conform to
	  HTML 4.01 Strict

2016-10-05  Arnaud Quette <arnaud.quette@free.fr>

	* common/common.c: Fix c++ style comments
	* drivers/snmp-ups.c: Fix exit code for --list

2016-09-28  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_xml_http.c: nut-scanner : implement single-
	  IP and IP-range UDP NetXML device discovery
	* tools/nut-scanner/scan_snmp.c: scan_xml_http.c : fix leading
	  whitespaces (SPACE vs TABs mixed in code)
	* tools/nut-scanner/scan_snmp.c: scan_xml_http.c : replace some
	  fprintf with upsdebugx
	* tools/nut-scanner/nut-scanner.c: nut-scanner.c : increased debug-
	  tracing messages of nut-scanner progress
	* tools/nut-scanner/nut-scanner.c: nut-scanner.c : replaced printq()
	  with standard upsdebugx(), added "-D" option to increase debug
	  verbosity as common in NUT, moved the help text printout to its own
	  function

2016-09-27  Jim Klimov <jim@jimklimov.com>

	* common/common.c, include/common.h: common.c/.h : simplify the
	  upsdebugx() enhancement (no need to fight with warnings/pragmas)

2016-09-26  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/systemd/nut-server.service.in: systemd: add reload support
	  for nut-server / upsd  Add ExecReload entry to execute a
	  configuration reload of upsd, using the available 'upsd -c reload'

2016-09-25  Charles Lepple <clepple+nut@gmail.com>

	* drivers/libusb1.c: libusb1: use return code from libusb_open()  Per
	  <http://libusb.sf.net/api-1.0/group__dev.html#ga8163100afdf933fabed
	  0db7fa81c89d1>, the handle is only populated when the return code
	  is 0.  This fixes a crash during device detection where more than
	  one HID UPS is available, and the driver needs to skip the first
	  one.

2016-09-21  Jim Klimov <jim@jimklimov.com>

	* include/common.h: common.h : rearranged the
	  ENABLE_WARNING/DISABLE_WARNING macro definitions so they are only
	  called for supported compilers and generate empty macros (no-op)
	  for others

2016-09-20  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : move anti-warning macros out of the
	  function body, some compilers do not like that

2016-09-19  Jim Klimov <jim@jimklimov.com>

	* tools/nut-scanner/scan_xml_http.c: scan_xml_http.c : do not suggest
	  NetXML support for ePDUs (almost exclusively they are XMLv4 and do
	  not work with current NUT)

2016-09-18  Jim Klimov <jim@jimklimov.com>

	* common/common.c: common.c : in upsdebugx() added "[Dx]" prefix : do
	  not add it for level 0

2016-09-17  Jim Klimov <EvgenyKlimov@eaton.com>

	* common/common.c, include/common.h: common.c : augment upsdebugx()
	  and upsdebug_with_errno() by prepending the debug-level to logged
	  messages
	* common/common.c: common.c : fix whitespaces

2016-09-17  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : do not fail configuration if a doctype
	  picked with "auto" can not be built on this system - just skip it

2016-09-15  Jim Klimov <jim@jimklimov.com>

	* drivers/snmp-ups.c: Added and documented an snmp-ups argument to
	  list currently loaded MIB-to-NUT mappings (typo fix)
	* docs/man/snmp-ups.txt, drivers/snmp-ups.c: Added and documented an
	  snmp-ups argument to list currently loaded MIB-to-NUT mappings
	* drivers/snmp-ups.c: snmp-ups.c : small typo fix
	* docs/man/snmp-ups.txt, drivers/ietf-mib.c: Mention tripplite
	  mapping in snmp-ups manpage; updated some comments about it in
	  ietf-mib.c
	* configure.ac: configure.ac : when verifying ability to build docs,
	  consider out-of-tree builds too

2016-09-14  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : verify that we can actually build a
	  simple or chunked HTML document, beside having nominal versions of
	  software
	* configure.ac: configure.ac : verify that we can actually build a
	  manpage document, beside having nominal versions of software
	* configure.ac: configure.ac : verify that we can actually build a
	  simple PDF document, beside having nominal versions of software

2016-09-13  Jim Klimov <jim@jimklimov.com>

	* drivers/ietf-mib.c: Give the Tripplite SNMP MIB a name, do not
	  duplicate "ietf" entries

2016-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c, drivers/blazer_usb.c, drivers/libusb1.c,
	  drivers/nutdrv_atcl_usb.c, drivers/nutdrv_qx.c,
	  drivers/richcomm_usb.c, drivers/riello_usb.c: libusb 1.0 port: fix
	  return code for interrupt ops  libusb 1.0 returns on success, the
	  number of bytes actually transferred or otherwise an error code,
	  except for interrupt transfers, where the actual transfer size is
	  stored in a separate variable. The libusb 1.0 implementation in NUT
	  thus needed to be fixed to behave the same way than the libusb 0.1
	  implementation  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0 port: remove the check on USB device
	  count  With the port to libusb 1.0, a sanity check was done on the
	  available number of USB devices to try. This however caused a
	  behavior regression, since the only device that NUT may have access
	  to can be the only UPS connected. In this case, the driver may exit
	  upon trying to reconnect if the device is transiently not available
	  Reference: https://github.com/networkupstools/nut/issues/300
	* drivers/libusb1.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  complete usb_set_altinterface code  usb_set_altinterface allows to
	  force the USB code to call `libusb_set_interface_alt_setting (0,
	  0)` (equivalent to `libusb_set_altinterface(0)` in libusb 0.1), as
	  was done in NUT 2.7.2 and earlier. However, the libusb 1.0
	  implementation was still missing the related code  Reference:
	  https://github.com/networkupstools/nut/issues/300
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: libusb 1.0 port:
	  fix kernel driver detachment  Following the recent modification for
	  the kernel driver detachment, and the related functions
	  availability depending on the platforms, nutdrv_atcl_usb and
	  richcomm_usb were using the wrong macro for
	  libusb_set_auto_detach_kernel_driver and were missing the libusb
	  1.0 code for explicit kernel driver detachment  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c, m4/nut_check_libusb.m4: libusb 1.0 port: rework
	  the kernel driver detachment  libusb 1.0 has introduced a new
	  function (libusb_set_auto_detach_kernel_driver), beside from the
	  explicit kernel driver detachment request
	  (libusb_detach_kernel_driver). However, the former is not available
	  on all systems. As an example, FreeBSD 10.1-10.3 does not have
	  this. The detachment and interface claiming has been reworked to
	  handle this case (reported by Charles Lepple)  Reference:
	  https://github.com/networkupstools/nut/issues/300

2016-08-16  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsrw.c: upsrw: display the variable type beside ENUM /
	  RANGE  upsrw now displays more information, beside the ENUM and
	  RANGE, such as the variable type (NUMBER or STRING), and the
	  maximum length for STRING  Closes:
	  https://github.com/networkupstools/nut/issues/267
	* include/extstate.h: Add an explicit type NONE (ST_FLAG_NONE)
	  Reference: https://github.com/networkupstools/nut/issues/267
	* server/netget.c: Modify server side publication for variable type
	  ENUM can be either NUMBER or STRING, which was previously not
	  published.  Reference:
	  https://github.com/networkupstools/nut/issues/267
	* drivers/dstate.c: Automatically set the "NUMBER" flag for ranges
	  Ranges, added through dstate_addrange(), only support numeric
	  ranges. So automatically add the ST_FLAG_NUMBER flag to range
	  Reference: https://github.com/networkupstools/nut/issues/267
	* drivers/dstate.c: Support ST_FLAG_NUMBER in dstate_setflags()
	  Allow the drivers to explicitly use ST_FLAG_NUMBER through
	  dstate_setflags()  Reference:
	  https://github.com/networkupstools/nut/issues/267
	* include/extstate.h: Add an explicit type NUMBER (ST_FLAG_NUMBER)
	  Beside from the existing ST_FLAG_STRING, a need has arise to have
	  an explicit type NUMBER, and thus a flag for this type, can be used
	  generally, and more specifically with the driver primitive
	  dstate_setflags()  Reference:
	  https://github.com/networkupstools/nut/issues/267

2016-08-12  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb1.c: libusb 1.0: remove unused typesafe_control_msg()
	  workaround  For libusb 0.1 implementation, we had to workaround a
	  libusb API goofs, by wrapping the base function usb_control_msg(),
	  and casting the variables to the right type. This is not needed for
	  libusb 1.0 implementation, but was wrongly left in the code
	  (reported by Charles Lepple)
	* clients/upsrw.c: upsrw: display current values of NUMBER variables
	  References: https://github.com/networkupstools/nut/issues/267
	* drivers/snmp-ups.c: snmp-ups: discard decimals when set to "0"
	  Publish values as integer when decimals are set to "0". This at
	  least makes sense for some values that are real integers (phases
	  and outlets counts for example), but also with many other values
	  that have not sufficient precision to provide decimals

2016-08-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: fix a warning on unused variable
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: simplify bus publication
	  bus publication was wrongly listing both the bus and the portname,
	  instead of the bus only. This may have caused some issue when
	  trying to match the port
	* drivers/usbhid-ups.c: usbhid-ups/mge-shut: forgotten version bump
	* drivers/usbhid-ups.c: usbhid-ups/mge-shut: rework errno/errors
	  handling  libusb 1.0 has its own set of return codes, and error
	  interface. Rework the common HID core (shared between usbhid-ups
	  and mge-shut) so that error handling can work with both, and using
	  either libusb 0.1 or 1.0 for usbhid-ups
	* tools/nut-scanner/scan_usb.c: nut-scanner: missing symbols lookup
	  for libusb 1.0  A few symbols from libusb 1.0 were wrongly used
	  directly, instead of being looked up and loaded at init time
	* drivers/bcmxcp_usb.c, drivers/libusb1.c, drivers/nutdrv_atcl_usb.c,
	  drivers/richcomm_usb.c: libusb 1.0 port: add missing libusb_exit()
	  calls
	* tools/nut-scanner/nutscan-init.c, tools/nut-scanner/scan_usb.c,
	  tools/nut-usbinfo.pl: nut-scanner: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c, drivers/richcomm_usb.c: Remove redundant
	  variable
	* drivers/tripplite_usb.c: tripplite_usb: remove extraneous comment
	  char
	* drivers/nut_libusb.h: permute typedef order of usb_dev_handle
	* drivers/nutdrv_qx.c: nutdrv_qx: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/richcomm_usb.c: richcomm_usb: missing function remap for
	  libusb 0.1  usb_strerror was not remapped for libusb 0.1
	  implementation
	* drivers/tripplite_usb.c: tripplite_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/riello_usb.c: riello_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices

2016-08-10  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/richcomm_usb.c: richcomm_usb: initial port to libusb 1.0
	  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: add the missing detach
	  call  libusb 1.0 provide its own routine for detaching kernel
	  driver
	* drivers/Makefile.am, drivers/libhid.c, drivers/nut_libusb.h:
	  Forgotten occurences of libusb.h renaming  NUT internal header
	  "libusb.h" was renamed, since it collides with the libusb 1.0
	  header, which has the same name. A few occurences of reference and
	  documentation were however missing
	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: initial port to libusb
	  1.0  The port to libusb 1.0 is complete, at least from a build
	  perspective. This now needs to be tested with devices
	* drivers/blazer_usb.c: blazer_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* drivers/bcmxcp_usb.c: bcmxcp_usb: code cleanup

2016-08-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: bcmxcp_usb: initial port to libusb 1.0  The
	  port to libusb 1.0 is complete, at least from a build perspective.
	  This now needs to be tested with devices
	* docs/configure.txt, drivers/Makefile.am, drivers/libhid.c,
	  drivers/libhid.h, drivers/{libusb.c => libusb0.c},
	  drivers/libusb1.c, drivers/{libusb.h => nut_libusb.h}, drivers/usb-
	  common.h, drivers/usbhid-ups.c: ushid-ups: complete the port to
	  libusb 1.0  The port to libusb 1.0 is now complete for usbhid-ups.
	  Other USB drivers (bcmxcp_usb, blazer_usb, nutdrv_atcl_usb,
	  richcomm_usb, riello_usb, tripplite_usb, nutdrv_qx) have still to
	  be addressed

2016-08-06  Jim Klimov <jim@jimklimov.com>

	* docs/man/dummy-ups.txt: dummy-ups.txt : noted the sleep between
	  loops
	* docs/man/dummy-ups.txt: dummy-ups.txt : text and formatting revised
	  to be clearer to the uninitiated

2016-08-04  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/snmp-ups.txt: snmp-ups: document the use of non-standard
	  port  SNMP agent may publish data over a non-standard port, i.e.
	  not 161. This feature is supported since the origin, but was not
	  explicitly documented nor usable

2016-08-01  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, m4/nut_check_libusb.m4: Initial port to libusb 1.0
	  Starting with the configure checks, to detect if libusb 1.0 if
	  available, and otherwise fall back to the libusb 0.1 backend

2016-07-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix device.type publication  In
	  daisychain mode at least, device.type was not set to its actual
	  value, using the current mapping structure, but defaulting to "ups"
	  (reported by Tomas Halman, from Eaton)
	* drivers/snmp-ups.c: snmp-ups: fix and improve match_sysoid  The
	  function was returning FALSE instead of NULL in one case. Also
	  retry at most 3 times to get the sysOID

2016-07-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix instant commands publication
	  With non-daisychain setup, there was a bug that created an infinite
	  test loop when trying to add instant commands

2016-06-30  Tomas Halman <TomasHalman@eaton.com>

	* clients/nutclient.cpp: nutclient: fix library segmentation fault if
	  device name doesn't exists.  If device doesn't exist, getClient()
	  returns NULL. Then calling the method like
	  getClient()->getDeviceDescription(getName()) causes segfault. We
	  rather check the status and throw an exception in this case.

2016-06-25  Charles Lepple <clepple+nut@gmail.com>

	* docs/acknowledgements.txt: doc: fix acknowledgements link to GitHub

2016-06-23  Timothy Pearson <kb9vqf@pearsoncomputing.net>

	* drivers/libhid.c, drivers/tripplite-hid.c, drivers/usbhid-ups.c,
	  scripts/upower/95-upower-hid.rules: Add support for SU3000LCD2UHV
	  Note that protocol 1330 does not respond to requests for
	  UPS.OutletSystem.Outlet.DelayBeforeReboot, therefore those requests
	  needed to be bypassed in the driver.

2016-06-23  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-xml.c: netxml-ups: detect the unsupported XML v4
	  protocol  The XML/PDC protocol had an update with version 4, for
	  ePDU. However, this version is not supported by netxml-ups. We now
	  detect this version, and explicitly exit with an "XML v4 protocol
	  is not supported!" message
	* drivers/netxml-ups.c: netxml-ups: fix a segmentation fault
	  netxml_get_page() was not checking if page is NULL, hence resulting
	  in a segmentation fault with Eaton ePDU, which use the unsupported
	  version 4 of the XML/PDC protocol. Bump the driver version to 0.41

2016-06-13  Tomas Halman <TomasHalman@eaton.com>

	* clients/nutclient.cpp: NUT client library: internal::Socket class
	  must close socket in destructor.

2016-04-16  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in, drivers/mge-hid.c, scripts/upower/95-upower-
	  hid.rules: usbhid-ups: add IBM USB VID  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/7721 and
	  http://news.gmane.org/find-
	  root.php?message_id=5712AB29.6040001%40delphinidae.org.uk

2016-06-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: 2nd pass on fixing memory leaks  Fix
	  some remaining memory leaks reported by Coverity scan
	* drivers/snmp-ups.c: snmp-ups: fix memory leaks and incorrect
	  expression  Following the registration of NUT in Coverity scan, a
	  number of issues were identified. This is the very first set of QA
	  fixes related to this static code analysis

2016-06-08  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am: AIX package: reference the exact tarball version

2016-06-07  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: Update VMware ESXi package link (from René
	  Garcia)

2016-06-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix some regression due to daisychain
	  A few issues were remaining, following the daisychain support
	  addition. Issues were related to, at least, 3ph initialization and
	  data not being published, and identified with Eaton 3ph units,
	  using the "pw" MIB (reported by Yves Clauzel, from Eaton)

2016-06-05  Timothy Pearson <kb9vqf@pearsoncomputing.net>

	* drivers/powerp-txt.c: Add deep battery test for CyberPower
	  OL3000RMXL2U

2016-05-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: support
	  daisychain commands and settings  Daisychain commands and settings
	  on subdevices are now supported. Since 95% of the code of these two
	  functions was similar, a new function called su_setOID() was
	  created, and is now called by su_setvar and su_instcmd. This new
	  function is also daisychain-aware
	* drivers/dstate.c: dstate: adapt daisychain devices functions  For
	  daisychain devices, we increase the counter when alarms are present
	  on a subdevice, but don't decrease the count when the buffer is
	  empty. Otherwise, we may not get the ALARM flag in ups.status,
	  while there are some alarms present on device.X
	* drivers/eaton-mib.c: snmp-ups: fix input.L2.voltage on Eaton G2/G3
	  PDU  This data entry was missing the daisychain formatting
	  directive, which resulted in this data not being published
	  (reported by Vyskocil Michal from Eaton)

2016-05-27  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix regression related to daisychain
	  Fix a few regression with unitary devices, related to the
	  daisychain changes of the SNMP core engine
	* drivers/dstate.c: dstate: enforce underflow to not generate false
	  alarm  The newly introduced daisychain mechanism, with alarm
	  counters (not just boolean) introduced a potential underflow on
	  alarm_commit, which resulted in false positive "ALARM" flag
	  publication in ups.status
	* drivers/snmp-ups.c: snmp-ups: update for daisychain  Update the
	  daisychain implementation, as per the latest specification,
	  including considerations on "device.0". Alarms are also handled for
	  the daisychain devices. Initial code for settings and commands is
	  also present, but will be completed in subsequent commits, along
	  with a final cleanup and potential composite settings and commands
	  on "device.0" (that are then applied to all daisychain devices)
	* drivers/eaton-mib.c: snmp-ups: fix some daisychain data for Eaton
	  PDU  Some data (outlet.%i.current, outlet.%i.power,
	  outlet.%i.load.{off,on,cycle} and
	  outlet.group.%i.load.{off,on,cycle}) were missing the daisychain
	  formatting string, and were hence not published
	* docs/daisychain.txt, drivers/dstate.c, drivers/dstate.h: dstate:
	  add functions to address daisychain alarms  Add 2 new functions,
	  device_alarm_init() and device_alarm_commit(), to address
	  daisychain devices: these acts as the standard alarm_{init,commit},
	  but only clearing / committing the alarm buffer, and not
	  reinitializing the main alarm counter. Hence, the "device.0" (whole
	  daisychain) knows if it has to publish the "ALARM" flag in
	  ups.status

2016-05-25  Arnaud Quette <arnaud.quette@free.fr>

	* docs/new-drivers.txt: daisychain: add a reference for drivers and
	  alarms
	* docs/daisychain.txt: daisychain: update specification for alarms
	  handling
	* drivers/eaton-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-
	  ups: daisychain update, fix and completion  Following the
	  specification update on "device.0" consideration, adapt the current
	  implementation. For now, the whole daisychain will only publish
	  device.{mfr,model,count}. Initial support for settings and commands
	  was also added, and will be expanded to "device.0"
	* docs/daisychain.txt: daisychain: update and fix specification
	* docs/daisychain.txt: daisychain: update specification as per
	  discussion

2016-05-23  Arnaud Quette <arnaud.quette@free.fr>

	* docs/Makefile.am, docs/daisychain.txt, docs/developer-guide.txt,
	  docs/user-manual.txt: daisychain documentation: fix documentation
	  building  The daisychain documentation was missing from the build
	  rules, and from the documentation integration, which resulted in
	  documentation build being broken (reported by Charles Lepple). As a
	  side note, the documentation (both user and developer) will need
	  some update and cleanup, now that there is more content  Closes:
	  https://github.com/networkupstools/nut/issues/291
	* drivers/eaton-mib.c: snmp-ups: Eaton Aphel Revelation updates
	  Update Eaton Aphel Revelation MIB mapping, by fixing outlets
	  switchability publication and adding "device.revision". This last
	  data still has to be submitted as an RFC for extending NUT
	  variables namespace

2016-05-19  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix daisychain regression  A bug was
	  discovered with the new daisychain code and non-daisychained
	  device, resulting in data not being published

2016-05-18  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/compaq-mib.c, drivers/ietf-mib.c, drivers/mge-mib.c,
	  drivers/netvision-mib.c, drivers/powerware-mib.c, drivers/snmp-
	  ups.c, drivers/snmp-ups.h: snmp-ups: daisychain handling of 1ph /
	  3ph phases  Per device phases management is now available in
	  daisychain mode, for input, output and bypass. The overall
	  mechanism for phase determination has also changed to something
	  more generic, and not requiring the SU_FLAG_SETINT flag
	* drivers/eaton-mib.c: snmp-ups: fix input.phases for Eaton G2 / G3
	  ePDU  The current implementation was using the number of input, not
	  the number of phase(s)

2016-05-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: initial daisychain support for Eaton
	  PDU  Following the base implementation for daisychain support in
	  the SNMP driver core (snmp-ups), add support for daisychain for
	  Eaton PDU.  Commands definitions are disabled for now, and will be
	  addressed in a subsequent commit
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: base daisychain
	  support  This commit includes the initial support for daisychain.
	  There are however a number of limitations that still need to be
	  addressed, such as: * {input,output,bypass}.phase handling: for
	  now, mixed / hybrid daisychains are not supported * All devices
	  alarms are pushed to "ups.alarm" without discriminant (i.e. not
	  "device.X" appended to the alarm) * commands and settings are not
	  yet handled * non-regression testing on unitary devices have to be
	  done
	* README, docs/outlets.txt, docs/user-manual.txt: Documentation
	  adjustments
	* docs/daisychain.txt, docs/nut-names.txt: daisychain: initial
	  specification and documentation
	* drivers/mge-hid.c: mge-shut/usbhid-ups: list AEG PROTECT NAS vendor
	  06da  AEG PROTECT NAS were previously using VendorID / ProductID
	  0x2b2d / 0xffff, and are now using 0x06da / 0xffff. Also bump the
	  mge-hid subdriver version to 1.40

2016-05-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nutupsdrv.txt: Mention explicitly the default pollinterval
	  As in ups.conf manual page, mention the default poll interval, to
	  make it clear

2016-05-10  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-qa.txt: NUT QA: add Coverity static code analysis
	  information  NUT is now a registered Coverity project, and can thus
	  get static code analysis from it. This is just a first step, and
	  actions are needed to address the actual defects and complete the
	  project configuration. Due thanks to Synopsys, Inc., mother firm of
	  Coverity, for providing this service to Opensource project

2016-05-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apc-mib.c, drivers/snmp-ups.h: snmp-ups: remove the
	  redundant SU_TYPE_STRING define  SU_TYPE_STRING was originally
	  created to expose a required cast to string. However, it is
	  redundant with ST_FLAG_STRING, and not useful in the end. The only
	  subdriver that was using it is apc-mib (UPS support) and this was a
	  no-op
	* README: Fix wrong link reference  The "NUT outlets management and
	  PDU notes" were wrongly referred to as "Configuring automatic UPS
	  shutdowns

2016-05-04  Jim Klimov <jim@jimklimov.com>

	* .gitignore, docs/.gitignore: GitIgnore some built documents

2016-05-03  Jim Klimov <jim@jimklimov.com>

	* configure.ac: configure.ac : prefer "/usr/share/augeas/lenses/dist"
	  over "/usr/share/augeas/lenses" if present

2016-05-03  Arnaud Quette <arnaud.quette@free.fr>

	* docs/configure.txt: Document Augeas lenses configure option  Add
	  documentation on the new configure option --with-augeas-lenses-
	  dir=PATH

2016-05-03  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/man/Makefile.am: Follow-up to NUT PR#281 -
	  notice for the future
	* docs/Makefile.am, docs/man/Makefile.am: Revert toxic commit: "a2x
	  says "--destination-dir" is only valid for HTML... so let us reduce
	  complaints reported in build"  This reverts commit
	  fe17861c4ea12679b3ebfefa8a6d692d79d99f2d because in fact asciidoc
	  (8.6.9) lies about not supporting the flag, and it is reqired for
	  `ASCIIDOC_VERBOSE=-v make distcheck-light` to pass. So let's keep
	  it complaining but working.
	* Makefile.am, configure.ac, scripts/augeas/Makefile.am: Allow "make
	  install" to deliver Augeas lenses into the path defined by
	  configure (defaults to /usr/share/augeas/lenses)

2016-05-02  Jim Klimov <jim@jimklimov.com>

	* docs/Makefile.am, docs/man/Makefile.am: a2x says "--destination-
	  dir" is only valid for HTML... so let us reduce complaints reported
	  in build
	* configure.ac: configure.ac : by default, "--with-doc=man=yes" to
	  match legacy expectations, and permit "make dist" out of the box

2016-04-26  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c: nut-
	  scanner: Force numeric OIDs resolution  Force numeric OIDs
	  resolution (ie, do not resolve to textual names) and disable MIB
	  loading. This is mostly for the convenience of debug and results
	  output
	* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver generator:
	  add a FIXME

2016-04-11  Michal Vyskocil <michalvyskocil@eaton.com>

	* drivers/netvision-mib.c: netvision-mib: uses 0 as dfl  Change to
	  NULL as other subdrivers does

2016-04-11  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nutscan-init.c: nut-scanner: additional search
	  path  Prepend "/usr/" to the provided --libdir, in case this one
	  points at "/lib/..." or similar, and not to "/usr/lib/..."

2016-04-09  Émilien Kia <emilien.kia@gmail.com>

	* clients/nutclient.cpp: Correctly increment pointer in
	  stringset_to_strarr and stringvector_to_strarr.  Fix bug #232
	* tests/Makefile.am, tests/nutclienttest.cpp: Create unit test
	  (failing for now) to test bug #232 (nutclient:
	  stringset_to_strarr() and stringvector_to_strarr() only work for
	  one element).
	* clients/nutclient.cpp: Make string[set|vector]_to_strarr public to
	  be accessible to unit tests.
	* clients/nutclient.h: Make nut::Client::~Client virtual.  Prevent
	  compilation warning [-Wdelete-non-virtual-dtor].

2016-03-23  Jim Klimov <jim@jimklimov.com>

	* configure.ac, docs/configure.txt, docs/man/Makefile.am: Added
	  WITH_MANS support (to toggle generation of manpages) and revised
	  other documentation formats

2016-04-08  Jim Klimov <jim@jimklimov.com>

	* configure.ac, docs/configure.txt: configure.ac : do not inspect
	  systemdunitdir with pkg-info if we asked not to use it at all

2016-04-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/raritan-px2-mib.c: snmp-ups: fix a missing field in
	  raritan_px2 mapping  The default value (dfl field) was missing, and
	  thus producing a compilation warning

2016-04-07  Jim Klimov <jim@jimklimov.com>

	* docs/configure.txt, m4/nut_check_libgd.m4,
	  m4/nut_check_libnetsnmp.m4: Allow to customize path to gdlib-config
	  and net-snmp-config programs

2016-04-06  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, docs/man/snmp-ups.txt, drivers/Makefile.am,
	  drivers/raritan-px2-mib.c, drivers/raritan-px2-mib.h, drivers/snmp-
	  ups.c: snmp-ups: support Raritan Dominion PX2 PDU  Based on initial
	  work and data from Opengear, using SNMP subdriver creation script,
	  add support for the more recent Raritan PDU, model PX2.  This was
	  tested with a PX2-1486 (Metered Input), but should cover all PX2
	  models
	* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver creation
	  script: minor updates

2016-03-23  Jim Klimov <jim@jimklimov.com>

	* configure.ac: Fix "--with-doc=auto" to use present doc-gens  *
	  configure.ac : when using "--with-doc" do actually proceed if some
	  supported methods are found and some are not... build what we can
	  on this platform * configure.ac : revised upon peer review :
	  yes==all, default(empty)==no as documented in --help, auto guesser
	  must be explicit

2016-03-24  Kirill Ovchinnikov <kirill@rednoize.su>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: Added a feature of power on
	  and power off delay time writing to UPS configuration; Added
	  support of writing "timeticks" values to su_setvar() routine

2016-03-23  Michal Vyskocil <michalvyskocil@eaton.com>

	* drivers/eaton-mib.c: Bumb version of eaton-mib

2016-03-23  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/snmp-ups.txt, docs/snmp.txt: Fix references to the SNMP
	  section of protocols

2016-03-22  Michal Vyskocil <michalvyskocil@eaton.com>

	* drivers/snmp-ups.h: snmp-ups: mark SU_FLAG_OK as internal to the
	  driver
	* drivers/eaton-mib.c: snmp-ups: add outlet type to Eaton Marlin MIB

2016-03-22  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: Remove the extraneous GNU in front of FreeIPMI
	  Messages are now more homogeneous
	* docs/configure.txt: Clarify multiple specifier for --with-doc
	* docs/configure.txt: Update FreeIPMI requirements  The documented
	  requirements were out of date, compared to the tests done at
	  configure time

2016-03-22  Michal Vyskocil <michalvyskocil@eaton.com>

	* drivers/snmp-ups.h: snmp-ups: enhance documentation of some flags
	  Mark SU_FLAG_OK as deprecated and SU_FLAG_STALE as internal to
	  driver. This helps new developers to write or extend snmp
	  subdrivers.
	* docs/nut-names.txt: Document outlet.n.type  Add and document
	  outlet.n.type variable, which provides information about physical
	  outlet type.

2016-03-19  Charles Lepple <clepple+nut@gmail.com>

	* configure.ac: Version to 2.7.4.1 for snapshots

2016-03-18  Marty R <martin.p.rowe@gmail.com>

	* docs/download.txt: Update OpenWRT package information  The previous
	  link is over 5 years old, nut is now maintained in the packages
	  repository on GitHub.

2016-03-10  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/Makefile.am: Fix nut-scanner compilation in some
	  environments  Following the commits 5187dab (common: add some
	  string-related functions) and e767df5 (common: consolidate some
	  string-related functions), the build rules of nut-scanner were not
	  updated to also use str.c. Since the libcommon.la dependency was
	  still there, some environments managed to build cleanly, while
	  other are failing.  Update build dependencies to fix this situation
	* drivers/powerware-mib.c: snmp-ups: Eaton 3ph UPS improvements  Fix
	  the battery test status reporting, and start to simplify the
	  mapping layout by getting rid of some #define. Also add the
	  following: - battery test result "Unknown" - last battery
	  replacement date (battery.date) - output.voltage thresholds (high
	  and low) and nominal value
	* drivers/snmp-ups.c: snmp-ups: add a debug trace on
	  nut_snmp_get_int()

2016-03-09  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: Fix autoreconf on Debian  For some reason, Automake
	  doesn't search the current directory correctly when searching for
	  helper scripts, when 'nut' is running as a git-submodule, as it is
	  the case with the website repository
	* configure.ac: update version to 2.7.4
	* drivers/apc-ats-mib.c: snmp-ups: add APC ATS input.source
	* drivers/snmp-ups.c: snmp-ups: fix the matching OID tests  For both
	  sysOID and classic methods, we used to test one of the two OIDs
	  provided in the mib2nut structures. However, these two OIDs
	  (oid_pwr_status and oid_auto_check) tend to be redundant and
	  confusing. Replace these matching by an extraction of
	  {ups,device}.model
	* drivers/nut-libfreeipmi.c: nut-ipmipsu: fix compilation warnings
	* NEWS, UPGRADING, docs/FAQ.txt, docs/net-protocol.txt, docs/new-
	  drivers.txt, docs/nut-names.txt, docs/nutdrv_qx-subdrivers.txt,
	  docs/packager-guide.txt, docs/snmp-subdrivers.txt, lib/README,
	  scripts/augeas/README: Fix spelling and typo errors  Following the
	  spell-checking scope expansion, do a spell-checking pass
	* docs/documentation.txt: Update documentation as per the new devices
	  scope
	* docs/features.txt, docs/user-manual.txt: Update documentation as
	  per the new devices scope
	* docs/Makefile.am: Expand spell-checking scope  Add more documents,
	  outside of the docs/ directory Closes:
	  https://github.com/networkupstools/nut/issues/222

2016-03-08  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, tools/Makefile.am, tools/driver-list-format.sh: Check
	  driver.list[.in] format at make dist time  Instead of checking
	  driver.list.in at configure time, move the checking and
	  modification into a script that is called at make dist time. The
	  script can also be called manually, and will try to fix both
	  driver.list.in and driver.list

2016-03-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powerware-mib.c: Remove an erroneous test  This was made
	  test the enumerated values registration in snmp-ups, and should not
	  have been committed
	* data/driver.list.in: HCL: APC ATS AP7724 supported by snmp-ups
	  These Automatic Transfer Switch should be supported by snmp-ups,
	  however this was not tested at all Reference:
	  https://github.com/networkupstools/nut/issues/260
	* NEWS, UPGRADING: Update for release 2.7.4
	* drivers/Makefile.am, drivers/apc-ats-mib.c, drivers/apc-ats-mib.h,
	  drivers/snmp-ups.c: snmp-ups: support APC Automatic Transfer Switch
	  Following the recent extension of NUT scope and variable namespace,
	  to support Automatic Transfer Switch (ATS), implement SNMP support
	  for APC ATS (with help from "maaboo" through github) Reference:
	  https://github.com/networkupstools/nut/issues/260

2016-03-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/baytech-mib.c, drivers/bestpower-mib.c, drivers/compaq-
	  mib.c, drivers/cyberpower-mib.c, drivers/eaton-mib.c, drivers/mge-
	  mib.c, drivers/netvision-mib.c, drivers/powerware-mib.c,
	  drivers/raritan-pdu-mib.c: snmp-ups: fix mib2nut structures  Non
	  existent OIDs, for testing MIB selection, must be expressed as NULL
	  and not as empty string ("") for the algorithm to work

2016-03-03  Daniele Pezzini <hyouko@gmail.com>

	* docs/download.txt: docs: update several download links

2016-03-03  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMBER
	  type float values  Clarify a bit more documentation on how to
	  express float values, when using upsrw.  That is to say, using
	  decimal (base 10) english-based representation, so using a dot, in
	  non-scientific notation.  So hexadecimal, exponents, and comma for
	  thousands separator are forbiden
	* clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Prefer
	  NUMBER to NUMERIC for variable type  As per discussion on the
	  Github pull request, NUMBER would be more suitable than NUMERIC

2015-11-22  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: increase timeouts in 'sgs' USB
	  subdriver  Apparently the previously used timeouts in the 'sgs' USB
	  subdriver were not always enough, so increase them.

2015-11-11  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: various TS Shara UPSes supported by
	  nutdrv_qx  Protocol: 'megatec' USB subdriver: 'sgs'
	* drivers/nutdrv_qx.c: nutdrv_qx: make sure 'sgs' USB subdriver uses
	  only what it reads  Since, in 'sgs' USB subdriver, we read only 8
	  bytes at a time and we expect the first byte to tell us the length
	  of the data that follows, make sure we don't use more than what we
	  read from the device in case the first byte is not what we expect
	  it to be.

2015-03-04  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: increase verbosity of 'sgs' USB
	  subdriver  In 'sgs' USB subdriver: - be more verbose when
	  debugging, - always print the return code when dealing with an
	  error.

2014-01-31  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: update man page for new 'sgs'
	  USB subdriver

2014-01-31  Ronaldo Yamada <rhyamada@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: add new 'sgs' USB subdriver to
	  support TS Shara units

2016-03-02  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: added Eaton Powerware 9125-5000g
	  Supported with the additional USB card, with the bcmxcp_usb driver
	* docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMERIC
	  type float values  Clarify documentation on how to express float
	  values, when using upsrw.  That is to say, using decimal english-
	  based representation, so using a dot
	* drivers/mge-xml.c: netxml-ups: fix Eaton XML published data  Some
	  raw protocol data were wrongly published, and are now commented.
	  Also add some R/W flags to ambient thresholds Closes:
	  https://github.com/networkupstools/nut/issues/201
	* tools/nut-scanner/nut-scanner.c: nut-scanner: fix thread attachment
	  Add a test to have the right thread waiting for the scan to be
	  complete (patch from Michal Hlavinka, Red Hat)
	* configure.ac, tools/nut-scanner/nutscan-init.c, tools/nut-
	  scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: nut-scanner:
	  don't depend on development libraries  nut-scanner was previously
	  trying to use directly libXXX.so (libusb-0.1, libfreeipmi,
	  libnetsnmp, libavahi-client, libneon, libupsclient}. However, these
	  files are generally provided by the development packages. nut-
	  scanner now tries to look at some known paths, including the one
	  provided through --libdir, to find the correct libraries Closes:
	  https://github.com/networkupstools/nut/issues/233

2016-03-01  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Default to
	  type NUMERIC for variables  Any variable that is not STRING, RANGE
	  or ENUM is just a simple numeric value. The protocol documentation
	  (net-protocol.txt) was previously stating that "The default <type>,
	  when omitted, is integer." which was not fully true, since a
	  variable could also be a float.  Hence, the wording was changed to
	  advertise this, and that each driver is then responsible for
	  handling values as either integer or float.  Moreover, instead of
	  returning a TYPE "UNKNOWN", return "NUMERIC", which is more
	  suitable, and aligned with the NUT protocol specification
	* tools/nut-snmpinfo.py: SNMP subdriver generator: fix output
	  formatting
	* tools/nut-snmpinfo.py: SNMP subdriver generator: discard commented
	  lines  Discard any commented mib2nut_info_t declaration, which
	  should thus not be taken into account

2016-02-26  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/Makefile.am, drivers/eaton-ats-mib.c,
	  drivers/eaton-ats-mib.h, drivers/snmp-ups.c: snmp-ups: support
	  Eaton Automatic Transfer Switch  Following the recent extension of
	  NUT scope and variable namespace, to support Automatic Transfer
	  Switch (ATS), implement SNMP support for Eaton ATS.  Note that this
	  device can also be supported through Eaton XML/PDC (XML over HTTP)
	  protocol, supported by the NUT netxml-ups driver
	* data/cmdvartab, docs/nut-names.txt: Extend namespace for Automatic
	  Transfer Switch (ATS)  Extend NUT namespace to support a new type
	  of power device: ATS - Automatic Transfer Switch.  These devices
	  are used to setup 2 power systems, such as UPS, to power a single
	  power supply system, and be able to automatically transfer between
	  the input sources in case of failure of the primary one. The added
	  variable are for now limited to 'input.source' and
	  'input.source.preferred', but may be extended if needed

2016-02-25  C Fraire <cfraire@me.com>

	* docs/scheduling.txt: Fix docs location of upssched to sbin

2016-02-25  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: add the last
	  missing element in the structure
	* drivers/apc-mib.c, drivers/bestpower-mib.c, drivers/compaq-mib.c,
	  drivers/cyberpower-mib.c, drivers/delta_ups-mib.c, drivers/huawei-
	  mib.c, drivers/ietf-mib.c, drivers/mge-mib.c, drivers/netvision-
	  mib.c, drivers/powerware-mib.c, drivers/xppc-mib.c,
	  scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: fix values
	  lookup terminating element  The terminating element should really
	  be NULL, and not the string "NULL", as it was originally done, back
	  in 2002
	* drivers/snmp-ups.c: snmp-ups: revert order of the NULL/"NULL" test
	  Fix a segfault when doing first the string comparison test
	* drivers/snmp-ups.c: snmp-ups: register values enumerations
	  Whenever there is a values lookup structure for read/write data,
	  push the values as enumerations for upsrw
	* drivers/snmp-ups.c: snmp-ups: try to lookup values for numeric
	  elements  Numeric elements can also use the value resolution
	  mechanism
	* drivers/snmp-ups.c: snmp-ups: counter test sysOID with a test OID
	  Some devices have buggy sysOID exposed. Allow to counter test
	  another OID, to be able to select between different mapping
	  structures

2016-02-24  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver creation
	  script: allow sysOID override  Allow to use -s to override buggy
	  sysOID in some device FW. In this case, the sysOID entry in the
	  mib2nut structure should be set to NULL

2016-02-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/raritan-pdu-mib.c: snmp-ups: fix macaddr support for
	  Raritan PDU  Raritan MIB was fixed to expose macaddr on
	  device.macaddr instead of ups.macaddr
	* drivers/baytech-mib.c: snmp-ups: fix macaddr support for Baytech
	  PDU  Baytech MIB was fixed to expose macaddr on device.macaddr
	  instead of ups.macaddr
	* drivers/eaton-mib.c: snmp-ups: fix and complete macaddr support for
	  Eaton  Eaton G2 and G3 can now expose the MAC address of the
	  device, using device.macaddr. Eaton G1 Aphel was fixed to expose
	  this data on device.macaddr instead of ups.macaddr
	* drivers/snmp-ups.c: snmp-ups: add support for hexadecimal octet
	  strings
	* drivers/snmp-ups.c: snmp-ups: fallback for classic MIB detection
	  If the sysOID matching has failed, then snmp-ups uses ups.model to
	  get an OID to test. In case ups.model is not available, fallback to
	  trying to use device.model instead
	* docs/images/nut_layering.png, docs/images/nut_layering.svg: Refresh
	  and complete NUT architecture diagram

2016-02-08  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powerware-mib.c: snmp-ups: extend Eaton 3ph outputSource
	  values map  Add the new status values for xupsOutputSource
	  (.1.3.6.1.4.1.534.1.4.5.0), that maps to both ups.status and
	  ups.type

2016-02-03  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powerware-mib.c: snmp-ups: improve support for Eaton 3ph
	  Improve support for temperature and humidity data, including: -
	  ups.temperature now available - fixing ambient.temperature
	  (previously pointing at a wrong OID) - ambient.humidity now
	  available - the following settings now available: *
	  ups.temperature.low * ups.temperature.high * ambient.humidity.high
	  * ambient.humidity.low * ambient.temperature.high *
	  ambient.temperature.low

2016-02-01  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: various APCUPSD-controlled APC devices
	  via apcupsd-ups  Originally reported by GitHub user @Thermionix.
	  Reference: https://github.com/networkupstools/nut/pull/215

2016-01-31  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/nutdrv_atcl_usb.txt: man/nutdrv_atcl_usb: point to
	  nutdrv_qx (fuji) for 0001:0000  Also update best guess for the USB-
	  to-serial converter situation.
	* docs/FAQ.txt: FAQ: udevadm for fixing permissions

2016-01-30  Charles Lepple <clepple+nut@gmail.com>

	* drivers/nut-libfreeipmi.c: FreeIPMI: do not split function
	  arguments with a conditional  Alternate approach to suggestion by
	  Romero B. de S. Malaquias  Closes:
	  https://github.com/networkupstools/nut/pull/250

2016-01-24  Charles Lepple <clepple+nut@gmail.com>

	* docs/config-notes.txt: Documentation: fix formatting  Put syntax
	  examples in verbatim mode, and remove spaces from ends of lines.
	* drivers/apc-hid.c: usbhid-ups: handle missing USB strings in APC
	  code  Closes: https://github.com/networkupstools/nut/issues/258
	  Might fix:
	  https://bugs.launchpad.net/ubuntu/+source/nut/+bug/1483615

2016-01-23  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: added NHS Laser Senoidal 5000VA  Source:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/7123
	  Closes: https://github.com/networkupstools/nut/issues/254

2016-01-14  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix staleness detection  With some
	  ePDUs or devices using template for outlet and outlet.group,
	  communication loss with the device were not detected, due to the
	  handling mechanism. Simply skipping commands for templates, after
	  the init time, is sufficient to avoid this issue

2016-01-05  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: improve stale communication recovery
	  Disable the 10 iterations to retry communicating with stale device.
	  This was leading up to 10 x 30 seconds, so 5mn, before being able
	  to get data again
	* docs/new-drivers.txt, docs/nut-names.txt: Document
	  battery.charger.status  This will in time replace the historic CHRG
	  and DISCHRG flags published in ups.status.  Closes
	  https://github.com/networkupstools/nut/issues/196

2016-01-03  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Sweex model P220 via blazer_usb
	  Reference: https://github.com/networkupstools/nut/issues/251

2016-01-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/ietf-mib.c, drivers/ietf-mib.h, drivers/snmp-ups.c: snmp-
	  ups: add support for Tripplite units on IETF mib  These devices
	  expose ".1.3.6.1.4.1.850.1", which could be supported through this
	  specific MIB.  For now, just link that to the IETF MIB, to provide
	  a first level of support  Reference:
	  https://github.com/networkupstools/nut/issues/171

2015-12-30  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: First stab at checking driver.list.in format

2015-12-29  Charles Lepple <clepple+nut@gmail.com>

	* scripts/upower/95-upower-hid.rules: upower: update for AEG

2015-12-29  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powercom.c: Fix the processing of output voltage for KIN
	  units  The processing of output voltage requires to also take into
	  account the line voltage, as reported by Patrik Dufresne. This may
	  still need some further adjustments  Reference:
	  https://github.com/networkupstools/nut/issues/187
	* drivers/powercom.c: Fix the processing of input voltage for KIN
	  units  The processing of input voltage requires to also take into
	  account the line voltage, as reported by Patrik Dufresne. Also bump
	  the driver version to 0.16, since 0.15 was already used, but not
	  set  Reference: https://github.com/networkupstools/nut/issues/187
	* drivers/mge-hid.c: Fix letter case for AEG USB VendorID  The letter
	  case of this VendorID may be important for generated files, such as
	  the udev ones (reported by Charles Lepple)

2015-12-28  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/mge-hid.c: HCL: AEG PROTECT B / NAS
	  supported by usbhid-ups  Reference:
	  https://github.com/networkupstools/nut/issues/249

2015-12-17  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: Legrand Keor Multiplug supported by
	  nutdrv_qx  Reference:
	  https://github.com/networkupstools/nut/issues/248

2015-12-09  Andrey Jr. Melnikov <temnota.am@gmail.com>

	* drivers/bcmxcp_usb.c: Don't call usb_close() after reset

2015-12-08  Andrey Jr. Melnikov <temnota.am@gmail.com>

	* drivers/bcmxcp_usb.c: Call usb_reset() when driver unable to claim
	  device
	* drivers/bcmxcp.h, drivers/bcmxcp_usb.c: Refactor get_answer()
	  routine, make it properly deal with multi-packets responses. Lower
	  stack usage.

2015-07-27  Daniele Pezzini <hyouko@gmail.com>

	* common/common.c, common/str.c, drivers/bcmxcp.c, drivers/blazer.c,
	  drivers/blazer_ser.c, drivers/blazer_usb.c, drivers/libhid.c,
	  drivers/mge-xml.c, drivers/nutdrv_qx.c, drivers/powerp-bin.c,
	  drivers/powerp-txt.c, drivers/powerpanel.c, drivers/tripplitesu.c,
	  drivers/upscode2.c, include/common.h, include/str.h, server/upsd.c,
	  tools/nut-scanner/scan_usb.c: common: consolidate some string-
	  related functions  Move *trim*() functions from common to str.
	  Prepend the 'str_' common prefix. Bailout early if string is NULL
	  or empty. In *trim_m() functions, make sure the string containing
	  characters to be removed is not NULL and bailout early if empty.
	  Add new str_trim[_m]() functions to remove both leading and
	  trailing characters at the same time. Update all the tree
	  accordingly; versioning where appropriate.
	* common/Makefile.am, common/str.c, include/Makefile.am,
	  include/common.h, include/str.h: common: add some string-related
	  functions

2015-11-10  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Electrys UPS 2500 (nutdrv_qx and
	  blazer_ser)  Closes
	  https://github.com/networkupstools/nut/issues/241
	* data/driver.list.in: HCL: Eaton E Series DX UPS 1-20 kVA uses
	  blazer_ser  Closes
	  https://github.com/networkupstools/nut/issues/238

2015-11-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: add number of outlets in Eaton ePDU
	  groups
	* docs/nut-names.txt: Add a variable for the number of outlets in a
	  group  Added 'outlet.group.n.count' which provides the number of
	  outlets in the outlet group 'n'

2015-11-06  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx_voltronic-qs.c: nutdrv_qx: update 'voltronic-qs'
	  subdriver  Since, for devices supported by 'voltronic-qs'
	  subdriver, in reality: - invalid commands or queries are echoed
	  back, - accepted commands are followed by action without any
	  further reply, update the subdriver interface accordingly. Also: -
	  change slightly the way we publish protocol as ups.firmware.aux, -
	  update F's reply examples and some info_type (ratings;
	  output.frequency) in QX to NUT table to reflect reality, - increase
	  version number.

2015-10-19  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve 'T'
	  protocol support in 'voltronic-qs-hex' subdriver  Since the last
	  byte of the reply to the QS query (before the trailing CR) of
	  devices that implement the 'T' protocol holds in reality ratings
	  informations (nominal output frequency/voltage and nominal battery
	  voltage) in its bits, change the 'voltronic-qs-hex' subdriver
	  accordingly. Also: - change slightly the way we publish protocol as
	  ups.firmware.aux, - increase version number.
	* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: simplify
	  {in,out}put voltage conversion in 'voltronic-qs-hex'  In
	  'voltronic-qs-hex' subdriver, instead of calculating separately the
	  fractional and integer part of input and output voltage, do it at
	  once. Also, increase version number.
	* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve protocol
	  identification in 'voltronic-qs-hex'  Since 'V' protocol, in
	  reality, never happens to use the encoded version of the reply to
	  the QS query, but it always uses the plain version already
	  implemented in 'voltronic-qs' subdriver, remove it from the
	  identification process of 'voltronic-qs-hex' subdriver. Also,
	  remove some non-significant entries from the testing table and
	  increase version number.
	* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: harmonize
	  declarations/definitions in 'voltronic-qs-hex'  In 'voltronic-qs-
	  hex' subdriver, the scope of support functions is limited to the
	  subdriver as rightly stated in forward declarations, so correct
	  their definitions to reflect that. Also, increase version number.

2015-10-09  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-qa.txt: Reference Black Duck OpenHUB in QA documentation
	  Closes networkupstools/nut#192

2015-10-08  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: also use __func__ for additional
	  traces
	* drivers/powerware-mib.c: powerware-mib: more comments for RFC
	  device.event  Add more comments on the need to RFC device.event for
	  some data that are currently published under ups.alarm
	* drivers/powerware-mib.c: snmp-ups: improve Eaton 3-phase UPS alarms
	  reporting  Eaton 3phase UPS, using the Powerware MIB, can expose
	  many new alarms. Also use the standard driver "X.YY" versioning,
	  and bump subdriver release to "0.85"
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix and improve
	  the ups.alarms mechanism  This mechanism allows to walk a subtree
	  (array) of alarms, composed of OID references. The object
	  referenced should not be accessible, but rather when present, this
	  means that the alarm condition is TRUE. Both ups.status and/or
	  ups.alarm values can be provided
	* drivers/snmp-ups.c: snmp-ups: fix on some snprintf calls  Some
	  snprintf calls are using dynamically allocated variables, which
	  doesn't work with sizeof
	* drivers/snmp-ups.c: snmp-ups: use __func__ in debug messages
	* drivers/snmp-ups.c: snmp-ups: nut_snmp_get_oid() returns TRUE on
	  success
	* drivers/snmp-ups.c: snmp-ups: only use snprintf calls instead of
	  sprintf
	* drivers/eaton-mib.c, drivers/snmp-ups.c: snmp-ups: simplify
	  handling of other alarms  outlet, outlet groups and phase alarms
	  are now using a simplified approach that does not require specific
	  lookup structure to adapt alarm messages. This applies to Eaton
	  ePDU G2/G3

2015-09-22  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix a typo error in debug message
	  Unknown is spelled with an ending N (reported by Evgeny "Jim"
	  Klimov, from Eaton)
	* drivers/snmp-ups.c: snmp-ups: optimize phase number extraction
	  efficiency  Since we know that we are processing an alarm for a
	  phase "Lx", don't use strchr, but simply index (reported by Evgeny
	  "Jim" Klimov, from Eaton)
	* docs/nut-names.txt, drivers/eaton-mib.c: snmp-ups: use dash-
	  separator for out-of-range  For the sake of coherence with other
	  status relative to thresholds, "out of range" frequency status now
	  also use dash as separator, instead of space
	* drivers/eaton-mib.c: Fix a spelling error in comments
	* drivers/eaton-mib.c: snmp-ups: fix a typo error on Eaton ePDU G2/G3
	  MIB  Critical is really spelled critical, and not cricital, as used
	  in the various status thresholds value-lookup structures (reported
	  by Evgeny "Jim" Klimov, from Eaton)
	* data/cmdvartab: Mention the unit for ambient humidity information
	  Add an explicit mention that ambient information related to
	  humidity use the "(percent)" unit
	* data/cmdvartab, docs/nut-names.txt: Mention the unit for input
	  voltage information  Add an explicit mention that input information
	  related to voltage use the "Volts (V)" unit
	* data/cmdvartab: Mention the unit for ambient temperature
	  information  Add an explicit mention that ambient information
	  related to temperature use the "degrees C" unit

2015-09-18  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: add outlet group identifier for
	  Eaton ePDU  Eaton ePDU can now publish the parent group of each
	  outlet
	* docs/nut-names.txt: Extend outlet collection namespace with group
	  ID  An outlet can now publish the group to which it belongs to
	* drivers/snmp-ups.c: snmp-ups: complete nut_snmp_get_{str,int}
	  These methods now allow to get the value of an OID returned by the
	  source OID (as for the sysOID). In case of failure (non existent
	  OID), the functions return the last part of the returned OID (ex:
	  1.2.3 => 3)
	* drivers/snmp-ups.c: snmp-ups: create a nut_snmp_get_oid() function
	  This method allows to get the value of an OID which is also an OID
	  (as for the sysOID), without trying to get the value of the pointed
	  OID. This will allow to use nut_snmp_get_{int,str}() the get the
	  value of the pointed OID

2015-09-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: outlet groups type handling for
	  Eaton ePDU  Eaton ePDU can now publish the type of outlet group
	* docs/nut-names.txt: Extend outlet group collection namespace with
	  type  The type of outlet group can now be published, part of the
	  new outlet.group data collection
	* drivers/eaton-mib.c: snmp-ups: outlet groups commands for Eaton
	  ePDU  Eaton ePDU can now handle commands outlet groups, including
	  on, off and reboot (cycle)
	* drivers/snmp-ups.c: snmp-ups: fix commands handling for outlet
	  groups  The su_instcmd() function of snmp-ups is now adapted to
	  support outlet groups
	* drivers/eaton-mib.c: Advanced outlets groups alarm handling for
	  Eaton ePDU  Eaton ePDU can now handle alarms on outlets groups, for
	  voltage and current, relative to the configured thresholds
	* drivers/snmp-ups.c: snmp-ups: improvements for outlet groups and
	  alarms  Improve the code for general template management, including
	  outlets and outlets groups for now, and add alarm management for
	  outlet groups, the same way as for outlets

2015-09-16  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: snmp-ups: fix set variable for outlet groups
	  The setvar() function of snmp-ups is now adapted to support outlet
	  groups
	* drivers/eaton-mib.c: snmp-ups: outlet groups handling for Eaton
	  ePDU  Eaton ePDU can now handle outlet groups, including voltage
	  and current (with thresholds and status relative to the configured
	  thresholds), along with power and realpower. A subsequent commit
	  will address the alarms, settings and commands. Bump subdriver
	  version to 0.30
	* drivers/snmp-ups.c: snmp-ups: update debug message  The template
	  guestimation function name was changed, but the debug message was
	  left with the old function name

2015-09-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Extend NUT namespace with outlet.group
	  collection  A new data collection, called "outlet.group", is now
	  available. It provides grouped management for a set of outlets. The
	  same principles and data than the outlet collection apply to
	  outlet.group
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: adapt template
	  mechanisms for outlet groups  The template handling mechanisms,
	  originally created for outlets, is now adapted to also manage
	  outlet groups

2015-09-14  root <root@arno-zbook15.euro.ad.etn.com>

	* docs/nut-names.txt: Add a note on the outlet.count variable

2015-09-14  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: add nominal input current for Eaton
	  ePDU  snmp-ups now provides input.[Lx.]current.nominal for Eaton
	  ePDU G2/G3, both for 1phase and 3phase
	* drivers/eaton-mib.c: snmp-ups: better input.power handling for
	  Eaton ePDUs  Improve the way we declare and process input.power, as
	  previously done for input.realpower, in order to address the
	  variations between Eaton ePDUs G2 and G3

2015-09-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: publish part number for Eaton ePDU
	  device.part was standardized in NUT namespace, so enable the
	  declaration for Eaton ePDU
	* drivers/eaton-mib.c: snmp-ups: 3-phase alarm handling for Eaton
	  ePDU  Eaton ePDU can now handle alarms on 3-phase, currently
	  limited to voltage and current, relative to the configured
	  thresholds
	* drivers/snmp-ups.c: snmp-ups: implement 3-phase alarm handling
	  snmp-ups now allows to publish 3-phase alarms in ups.alarm, the
	  same way as with outlet.  Declaration of such alarms are done using
	  "Lx.alarm". info_lkp_t structures messages are shared templates
	  with outlets, and use the string formats to include the context
	  (outlet or phase) and the number (of the outlet or phase) in alarm
	  messages.  These alarms are then published in "ups.alarm", with the
	  standard mechanism for alarm publication
	* docs/nut-names.txt: Extend 3-phase collection namespace with alarms
	  3-phase data collection now allows to specify alarms, the same way
	  than with the outlet collection ("outlet.n.alarm"), but using
	  "Lx.alarm" (for example "L1.alarm").  These alarms are then
	  published in "ups.alarm", with the standard mechanism for alarm
	  publication
	* drivers/eaton-mib.c: Advanced threshold handling for Eaton 3-phase
	  ePDU  Eaton ePDU can now handle warning and critical thresholds
	  settings and status for input voltage and current on 3-phase units.
	  Alarms are however still to be implement
	* docs/nut-names.txt: Extend 3-phase collection namespace with
	  threshold  3-phase data collection now allows to specify low / high
	  warning and critical thresholds for voltage and current. Status
	  relative to the thresholds also exist for these data

2015-09-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix loss of
	  precision when setting values  su_setvar() was losing precision
	  when converting and casting the provided values to send to the SNMP
	  agent. As an example, with an OID in millivolt (multiplier set to
	  0.001), when providing 238 (V) using upsrw, the value sent to the
	  SNMP agent was 237999, so leaking 0.1 volt

2015-09-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/dstate.c: Extend ups.alarm internal buffer to 1024 chars
	  Currently, ups.alarm can hold up to 256 chars to expose alarms.
	  With the recent outlet alarms handling addition, the buffer may
	  quickly be to small.  Thus, increase to 1024, which may still not
	  be sufficient but already provides a bit more room
	* drivers/eaton-mib.c: snmp-ups: outlet alarm handling for Eaton ePDU
	  Eaton ePDU can now handle alarms on outlets, currently limited to
	  outlet voltage and current, relative to the configured thresholds
	* drivers/snmp-ups.c: snmp-ups: implement outlets / PDU alarm
	  handling  snmp-ups now allows to publish outlets and PDU alarms in
	  ups.alarm, the same way as with ups.status.  Declaration of such
	  alarms are done using the outlet template mechanism
	  ("outlet.%i.alarm"). info_lkp_t structures messages can also use
	  the string formats to include the outlet number in alarm messages.
	  These alarms are then published in "ups.alarm", with the standard
	  mechanism for alarm publication
	* docs/nut-names.txt: Extend outlet collection namespace with alarms
	  Outlet data collection now allows to specify alarms, using the
	  template definitions ("outlet.n.alarm").  These alarms are then
	  published in "ups.alarm", with the standard mechanism for alarm
	  publication

2015-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: outlet threshold handling for Eaton
	  ePDU  Eaton ePDU can now handle warning and critical thresholds
	  settings and status for outlet voltage and current
	* docs/nut-names.txt: Extend outlet collection namespace with
	  threshold  Outlet data collection now allows to specify low / high
	  warning and critical thresholds for voltage and current. Status
	  relative to the thresholds also exist for these data

2015-09-01  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: alarms handling for Eaton ePDU
	  Eaton ePDU can now publish alarms, related to input status
	  (voltage, frequency and current) and ambient status (temperature
	  and humidity). Note that alarms are still published under
	  ups.alarms, though these should belong to either pdu.alarms or
	  better device.alarms
	* drivers/eaton-mib.c: Advanced input threshold handling for Eaton
	  ePDU  Eaton ePDU can now handle warning and critical thresholds
	  settings and status for input voltage and current, along with the
	  frequency status
	* data/cmdvartab, docs/nut-names.txt: Extend input collection
	  namespace with threshold  Input data collection now allows to
	  specify low / high warning and critical thresholds for voltage and
	  current. Status relative to the thresholds also exist for these
	  data, and for the frequency

2015-08-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: snmp-ups: ambient dry contacts support for
	  Eaton ePDU  Eaton ambient modules, connected on ePDU, now publish
	  the status of the connected dry contacts sensors
	* data/cmdvartab, docs/nut-names.txt: Extend ambient collection
	  namespace with dry contacts  Ambient data collection now allow to
	  specify dry contacts sensor status
	* drivers/eaton-mib.c: snmp-ups: fix Eaton Pulizzi Switched PDU
	  multiplier  As per the previous commit, to well handle integer RW
	  variables
	* drivers/eaton-mib.c: snmp-ups: ambient threshold handling for Eaton
	  ePDU  Eaton ePDU can now handle warning and critical thresholds and
	  status for both humidity and temperature
	* data/cmdvartab, docs/nut-names.txt: Extend ambient collection
	  namespace with threshold  Ambient data collection now allow to
	  specify warning and critical thresholds
	* drivers/eaton-mib.c: snmp-ups: publish presence of Eaton ambient
	  sensor  Publish the actual presence of ambient sensor for Eaton
	  ePDU G2 and G3
	* data/cmdvartab, docs/nut-names.txt: Publish the actual presence of
	  an ambient sensor  A new data was created (ambient.present) to
	  publish the actual presence of an ambient sensor

2015-10-06  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Asium P700, Micropower LCD 1000 and Eaton
	  5E1100iUSB

2015-10-06  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: LYONN CTB-800V supported by nutdrv_qx
	  Protocol: 'voltronic-qs-hex'  Reference:
	  https://github.com/networkupstools/nut/pull/230

2015-08-22  Mariano <marianojan@users.noreply.github.com>

	* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: add support for
	  LYONN CTB-800V  Small protocol validation change in 'voltronic-qs-
	  hex' subdriver to add support for the protocol used by the LYONN
	  CTB-800V UPS.

2015-09-28  Arnaud Quette <arnaud.quette@free.fr>

	* docs/new-drivers.txt: Fix spacing error

2015-09-22  Charles Lepple <clepple+nut@gmail.com>

	* drivers/solis.c, drivers/solis.h: solis: remove additional warnings
	  The "Waiting" flag is always zero, and several other variables were
	  not used.
	* drivers/solis.c, drivers/solis.h: solis: clean up warnings  Comment
	  out unused constants, and add 'static' and 'const' wherever
	  possible.

2015-09-20  Charles Lepple <clepple+nut@gmail.com>

	* drivers/Makefile.am, drivers/solis.c: solis: math fixes  As
	  mentioned here: https://github.com/networkupstools/nut/pull/235

2015-09-19  bsalvador <bruno.salvador@gmail.com>

	* drivers/solis.c, drivers/solis.h: solis: patch for Microsol Back-
	  Ups BZ1200-BR  patch for correct reading for Microsol Back-Ups
	  BZ1200-BR  (rebased onto solis_debug branch, and cleaned up
	  whitespace. -- CFL)  Closes
	  https://github.com/networkupstools/nut/pull/235 and Closes
	  https://github.com/networkupstools/nut/pull/236

2015-09-16  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, docs/man/snmp-ups.txt, drivers/powerware-
	  mib.c, drivers/powerware-mib.h, drivers/snmp-ups.c: snmp-ups: add
	  Eaton Power Xpert Gateway UPS Card  This newer generation of SNMP
	  card is used for BladeUPS or other UPS, and is serving the same
	  XUPS MIB, as in the "pw" subdriver
	* scripts/subdriver/gen-snmp-subdriver.sh: Update SNMP subdriver
	  generation script  Complete the documentation, by adding some notes
	  and examples ; Fix the MIBs directories list and the "keep
	  temporary files" option

2015-09-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: Improve log/debug output trace

2015-09-08  Charles Lepple <clepple+nut@gmail.com>

	* drivers/solis.c: solis: resync with end-of-packet character (0.64)
	  Suggested by @rpvelloso in https://github.com/networkupstools/nut/i
	  ssues/231#issuecomment-134795747  Note that the driver could
	  possibly get out-of-sync after initial detection.

2015-09-07  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/macosx-ups.txt, drivers/macosx-ups.c: macosx-ups:
	  gracefully handle disconnection of UPS  Tested on 10.9.5 and
	  10.10.5. Returns "data stale" when UPS disappears.

2015-09-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powerware-mib.c: Bump Powerware SNMP subdriver version

2015-09-04  Charles Lepple <clepple+nut@gmail.com>

	* Makefile.am, docs/configure.txt, docs/new-clients.txt, tools/nut-
	  scanner/README: doc: correct remaining `--with-lib` references
	  Credit: Paul Vermeer

2015-09-01  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.h: Minor updates to TODO comments
	* drivers/snmp-ups.c: Implement ups.alarm for SNMP  snmp-ups now
	  allows to publish alarms in ups.alarm, the same way as with
	  ups.status

2015-08-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: Proper handling of integer RW variables  RW
	  variables were previously supposed to always be strings. Thus, the
	  multiplier (using the info_len field) was not applied. Also allow
	  setting float values, not only integer
	* drivers/snmp-ups.c, drivers/snmp-ups.h: Fix default SNMP retries
	  and timeout  The previous patch was using the default values from
	  Net-SNMP, which are set to -1. When the user was not providing
	  overriden values, this was causing the driver to not be able to
	  establish the communication with the device. The default values are
	  now fixed, as per documented (i.e. 5 retries and timeout of 1
	  second). Also bump the driver version to 0.74
	* docs/man/ups.conf.txt, drivers/dstate.c: Make more obvious the
	  socket write failure  Document the error that require the use of
	  the 'synchronous' flag. Also use debug level 1 instead of 2 for the
	  debug message

2015-08-23  Charles Lepple <clepple+nut@gmail.com>

	* drivers/solis.c: solis: Add upsdebug*() and upslogx() calls for
	  diagnostics

2015-08-18  Kenny Root <kenny@the-b.org>

	* drivers/powerware-mib.c: Add ups.start.auto for Powerware SNMP  Use
	  the IETF UPS MIB to indicate to Powerware devices that it should
	  restart when mains power is applied.
	* drivers/powerware-mib.c: Fix some indentation problems in PowerWare
	  SNMP
	* drivers/powerware-mib.c: Add shutdown.return for Powerware SNMP
	  The Powerware MIB supports the concept of shutting down with a
	  delay and then returning when line power is restored. The delay is
	  set to 0 seconds currently.
	* drivers/powerware-mib.c: Add load.{off,on}.delay for Powerware SNMP
	  The commands to shut down with delay have existed since the first
	  version of the Powerware MIB so add the newer commands
	  "load.off.delay" and "load.on.delay" to aid in shutdown scripts.

2015-08-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/dummy-ups.c, drivers/dummy-ups.h: Fix dummy-ups for
	  external value changes  dummy-ups allow to change the values of the
	  publicated variables through the standard upsrw tool. This method
	  is handy to script value changes, in a controlled way, compared to
	  the dynamic version (using the TIMER keyword in .dev files), which
	  changes the values in a non controlled way. Bump driver version to
	  0.14
	* m4/nut_check_libnss.m4: Fully check for a working Mozilla NSS
	  Rework the NSS tests so that just having runtime libraries
	  installed is not enough. Moreover, since GNU libc6 also provides a
	  nss.h header, the test now checks for both nss.h and ssl.h  Closes
	  networkupstools/nut#184
	* docs/download.txt: Fix Red Hat / Fedora packages repository URL

2015-08-03  Tomas Halman <TomasHalman@eaton.com>

	* clients/nutclient.cpp: Problem: nutclient library sometimes reads
	  socket closed by server. Solution: proper read return value
	  evaluation

2015-08-04  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/scan_snmp.c: Fix a crash on a 2nd call to
	  libnutscan  on behalf of Tomas Halman, from Eaton Opensource Team

2015-07-24  Nash Kaminski <nashkaminski@gmail.com>

	* drivers/tripplitesu.c: tripplitesu: Fix initialization when
	  tripplite firmware is buggy  With some Tripplite SU1000RT2U (and
	  possibly more) UPS's, a firmware bug causes a malformed response to
	  the very first command that is sent after the serial port is opened
	  following a warm or cold boot of the system. My theory is that this
	  related to either the RS232 data lines or handshaking lines being
	  pulled high once the server's UART is powered however I have not
	  determined precisely if this is related to the data line being
	  pulled high or the handshaking lines being asserted. However, I
	  have been able to consistently reproduce the issue where the driver
	  fails to start on the first attempt after a cold/warm boot across 3
	  different machines and 2 SU1000RT2U UPS's. To workaround this, the
	  initial enumeration is repeated a 2nd time after 300ms(to allow all
	  garbage data to arrive) if the first attempt fails, which allows
	  the driver to consistently startup successfully on the 1st attempt.
	  Closes networkupstools/nut#220

2015-07-24  Tim Smith <tsmith84@gmail.com>

	* INSTALL.nut: Spelling fixes  Spelling fixes and capitalization of
	  SUSE

2015-07-23  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/augeas/nutupsconf.aug.tpl: Update Augeas lens for ups.conf
	  Add the various missing global directives and ups fields

2015-07-20  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: fix case and spacing

2015-07-18  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: when targeting 'UPS No Ack'
	  consider also the trailing CR  In 'fabula' and 'krauler' USB
	  subdrivers, take into account also the trailing CR in the reply
	  while looking for a 'UPS No Ack'.
	* drivers/nutdrv_qx.c: nutdrv_qx: stay true to return code in
	  'fabula' USB subdriver  In 'fabula' USB subdriver, when reading
	  'UPS No Ack' from device, since we already mimic a timeout, also
	  empty the reply.

2015-07-11  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Fideltronic INIGO Viper 1200 supported by
	  nutdrv_qx

2015-07-02  Charles Lepple <clepple+nut@gmail.com>

	* drivers/usbhid-ups.c: usbhid-ups: bump version to 0.41  Both the
	  eaton_dual_reportdesc and usbhid_ups_input_vs_feature branches
	  claimed version 0.40, so let's disambiguate the merged version.

2015-07-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libhid.c: Add a debug trace for the number of HID objects
	  found
	* drivers/hidtypes.h: Fix testing typo  MAX_REPORT is really 500 (HID
	  objects), not 50!
	* drivers/hidparser.c: Report when there are further unprocessed HID
	  objects  Following the last commits, and especially the MAX_REPORT
	  one, warn whenever there are remaining HID objects that were not
	  processed. This may serve
	* drivers/hidtypes.h: Increase the maximum number of HID objects  The
	  previous value (300) was causing a trim of the remaining objects.
	  Increase the value to 500, which should give a bit of time
	* drivers/libshut.c, drivers/libshut.h, drivers/libusb.c,
	  drivers/usb-common.h, drivers/usbhid-ups.c: Add support for Eaton
	  dual HID report descriptor  All devices use HID descriptor at index
	  0. However, some newer Eaton units have a light HID descriptor at
	  index 0, and the full version is at index 1 (in which case,
	  bcdDevice == 0x0202). This dual report descriptor approach is due
	  to the fact that the main report descriptor is now too heavy, and
	  cause some BIOS to hang. A light version is thus provided at the
	  default index, solving this BIOS issues

2015-06-27  Charles Lepple <clepple+nut@gmail.com>

	* drivers/macosx-ups.c: macosx-ups: fix for 10.10 (Yosemite); v1.1
	  In OS X 10.9 and earlier, IOPSGetPowerSourcesInfo() returned a
	  CFDictionary. In 10.10 it returns a CFArray. Programmers are
	  supposed to use IOPSGetPowerSourceDescription() to gloss over this
	  distinction.  However, this does not make it easy to distinguish
	  between a laptop battery and an UPS. So the "port" driver option no
	  longer has any effect.  https://developer.apple.com/library/mac/doc
	  umentation/IOKit/Reference/IOPowerSources_header_reference/#//apple
	  _ref/c/func/IOPSGetPowerSourceDescription

2015-06-22  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/upower/95-upower-hid.rules, tools/nut-usbinfo.pl: Update
	  UPower HID rules and generator

2015-06-11  Charles Lepple <clepple+nut@gmail.com>

	* drivers/usbhid-ups.c: usbhid-ups.c: fall back to HID Input type if
	  not a Feature

2015-06-07  Charles Lepple <clepple+nut@gmail.com>

	* drivers/tripplite-hid.c: tripplite-hid.c: device.part is static
	  (version 0.82)

2015-06-04  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: make sure processed item's
	  boundaries are not wrong

2015-04-26  Nick Mayerhofer <nick.mayerhofer@enchant.at>

	* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx.h: nutdrv_qx: improve documentation for some
	  methods

2015-06-04  Daniele Pezzini <hyouko@gmail.com>

	* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx.h: nutdrv_qx: remove redundant comments and
	  update docs

2015-04-28  Nick Mayerhofer <nick.mayerhofer@enchant.at>

	* drivers/nutdrv_qx_voltronic.c: nutdrv_qx: move var declaration in
	  'voltronic' subdriver  Move variable declaration to fulfill
	  condition '3.3. Portability' of the developer guide. Bump version.
	* drivers/libhid.c: libhid: replace "flush loop" with memset  Move to
	  the C way of setting memory (memset), replacing a for loop with a
	  few anti-patterns in it: - for (...; ; i++) - for (...; i <
	  MAGIC_NUMBER; ...) - for (...) array[i] = 0

2015-05-18  Daniele Pezzini <hyouko@gmail.com>

	* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c,
	  drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
	  drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
	  drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
	  drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c,
	  drivers/nutdrv_qx_zinto.c: nutdrv_qx: give subdrivers a last chance
	  to process the command  Add (and document) a new function
	  ('preprocess_command()') to preprocess the command to be sent to
	  the device, just before the actual sending and, in case of instant
	  commands/setvars, after the 'preprocess()' function has been
	  triggered (if appropriate). As an example, this function can be
	  useful to add to all commands (both queries and instant
	  commands/setvars) a CRC or to fill the command of a query with some
	  data. Also, in qx_process(), address buf size vs item->answer size
	  earlier. Update all subdrivers accordingly, bump versions.

2015-06-01  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/snmp-ups.txt, drivers/snmp-ups.c, drivers/snmp-ups.h:
	  Provide access to Net-SNMP timeout and retries  Two new extra
	  arguments are now available to allow overriding Net-SNMP number of
	  retries (snmp_retries) and timeout per retry (snmp_timeout). These
	  respectively maps to snmpcmd "-r retries" and "-t timeout"

2015-05-29  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/upower/95-upower-hid.rules: Update UPower HID rules
	* tools/nut-usbinfo.pl: Fix UPower device matching for recent kernels
	  As per the UPower patch below referenced, hiddev* devices now have
	  class "usbmisc", rather than "usb".  See
	  http://cgit.freedesktop.org/upower/commit/rules/95-upower-
	  hid.rules?id=9f31068707fc79744961cea7258b0eb262effbf1

2015-05-28  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
	  device.h, tools/nut-scanner/nutscan-display.c, tools/nut-
	  scanner/nutscan-init.c, tools/nut-scanner/nutscan-init.h,
	  tools/nut-scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h,
	  tools/nut-scanner/nutscan-serial.c, tools/nut-scanner/nutscan-
	  serial.h, tools/nut-scanner/scan_avahi.c, tools/nut-
	  scanner/scan_eaton_serial.c, tools/nut-scanner/scan_ipmi.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  Fix legal information on source-code headers  Copyright and author
	  were not mentioned as it should be. Most of the nut-scanner
	  copyright belongs to EATON, apart from few parts. Files
	  descriptions are now also in Doxygen format

2015-05-18  Daniele Pezzini <hyouko@gmail.com>

	* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c,
	  drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
	  common.h, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-
	  old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
	  drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
	  drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c,
	  drivers/nutdrv_qx_zinto.c: nutdrv_qx: make preprocessed value's
	  size_t a const  There's no need to intervene on the passed-to-the-
	  function value of a preprocessed value's size_t, so clarify it is a
	  const. Update all subdrivers accordingly, bump versions.
	* drivers/nutdrv_qx.c: nutdrv_qx: make sure an answer is not reused
	  if preprocess_answer() fails  If an item's preprocess_answer()
	  function fails, the answer should not be considered valid and
	  inherited by the following items with the same command. Therefore,
	  on failure, clear the answer so that the following items are forced
	  to query the device and preprocess the answer anew, if appropriate.

2015-05-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Update NUT packages for Windows to 2.6.5-6

2015-05-07  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/systemd/nut-server.service.in: Restore systemd relationship
	  with nut-driver service  The Requires directive from nut-server to
	  nut-driver was previously removed, since it was preventing upsd
	  from starting whenever one or more drivers, among several, was
	  failing to start. Use the Wants directive, a weaker version of
	  Requires, which will start upsd even if the nut-driver unit fails
	  to start.  closes https://github.com/networkupstools/nut/issues/200

2015-04-23  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am: Cleanup GPG signature before generation

2015-04-22  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: bump version back to 2.7.3.1
	* configure.ac: Restore version 2.7.3 for release
	* docs/security.txt: Missing link reference update  The filename of
	  the previous GPG release key was not updated, leading to pointing
	  to the current release key

2015-04-08  Nick Mayerhofer <nick.mayerhofer@enchant.at>

	* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx.h: nutdrv_qx: clarify docs/inline comments

2015-04-16  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: bump version to 2.7.3.1

2015-04-15  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac: update version to 2.7.3
	* docs/security.txt: Update release signature verification  The
	  release manager key has change. Update the documentation to reflect
	  it, along with keeping necessary for checking the previous releases
	* docs/download.txt: Fix formatting issue
	* NEWS, UPGRADING: Final update for release 2.7.3  Complete the
	  release information for NUT 2.7.3
	* docs/maintainer-guide.txt: Store some comments for latter
	  processing

2015-04-10  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Improve Eaton ABM support for USB/HID units  As
	  per clarifications from David G. Miller (Eaton ABM expert) and
	  customers request, when ABM is enabled, we now both publish the
	  following as per the ABM information: - the 5 status bits
	  {charging, discharging, floating, resting, off} under
	  battery.charger.status - the 2 historical status bits {CHRG,
	  DISCHRG} under ups.status When ABM is disabled, we just publish the
	  2 historical status bits {CHRG, DISCHRG} under ups.status, as per
	  UPS.PowerSummary.PresentStatus.{Charging,Discharging}, as done
	  previously

2015-04-02  Arnaud Quette <arnaud.quette@free.fr>

	* conf/ups.conf.sample, docs/man/ups.conf.txt, drivers/dstate.c,
	  drivers/dstate.h, drivers/main.c: Improve synchronous driver flag
	  implementation  The previous commit was suffering a number of
	  issues. The present commit fixes these, along with adding more
	  documentation and a better and more understandable implementation
	  code. Thanks to Daniele Pezzini for the thorough review  Closes:
	  https://github.com/networkupstools/nut/issues/197

2015-04-01  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/ups.conf.txt, drivers/dstate.c, drivers/dstate.h,
	  drivers/main.c: Implement synchronous driver flag  As per issue
	  #197, NUT drivers work by default in asynchronous mode. This means
	  that all data are pushed by the driver on the communication socket
	  to upsd (Unix socket on Unix, Named pipe on Windows) without
	  waiting for these data to be actually consumed.  With some HW, such
	  as ePDUs, that can produce a lot of data, asynchronous mode may
	  cause some congestion, resulting in the socket to be full, and the
	  driver to appear as not connected.  By enabling the 'synchronous'
	  flag, the driver will wait for data to be consumed by upsd, prior
	  to publishing more.  This can be enabled either globally or per
	  driver.

2015-04-07  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/systemd/nut-server.service.in: Do not Require systemd nut-
	  driver for nut-server  Put the Requires=nut-driver.service in
	  comment for nut-server systemd unit file. Thus we don't require
	  drivers to be successfully started! This was a change of behavior
	  compared to init SysV, and could prevent from accessing
	  successfully started drivers, or at least to audit a system
	  Closes: https://github.com/networkupstools/nut/issues/200

2015-04-04  Charles Lepple <clepple+nut@gmail.com>

	* UPGRADING: UPGRADING: mention SSL permissions (#199)
	* docs/security.txt: NSS SSL documentation  Addresses new behavior as
	  part of the NSS forking fix (#199). Formatting and wording fixed as
	  well.

2015-04-04  Émilien Kia <emilien.kia@gmail.com>

	* server/upsd.c: Initialize SSL after deamonize and downgrade to
	  user.  Fix issue #190 - upsd: NSS SSL only working in debug mode
	  https://github.com/networkupstools/nut/issues/190

2015-04-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: Better input.realpower handling for Eaton
	  ePDUs G2/G3  Improve the way we declare and process
	  input.realpower, in order to address the variations between Eaton
	  ePDUs G2 and G3

2015-03-19  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Document new variables and commands addition
	  The variables and commands that were added were not described in
	  the NUT namespace document. These are: input.transfer.delay -
	  battery.energysave.load - battery.energysave.delay -
	  battery.charger.status - outlet.1.shutdown.return -
	  outlet.2.shutdown.return
	* drivers/bcmxcp.c: Fix the letter case of ABM and outlets status
	  For more coherence with NUT status publication, these status are
	  now lower case
	* drivers/bcmxcp.c: Add missing Author

2014-10-10  gavrilov-i <gavrilov-i@users.noreply.github.com>

	* data/cmdvartab, drivers/bcmxcp.c, drivers/bcmxcp.h: drivers/bcmxcp:
	  advanced features  Closes: #158  Added setvar function exec result
	  parsing  Add command to turn load on after shutdown.stayoff and
	  shutdown.return.  Outlet control changed. Outlet control via
	  commands "outlet.n.load.on/off" like in other drivers. Variable
	  outlet.n.staus now only for reading.  Some code changes in
	  outlet.n.shutdown.return command -  now supporting more than 3
	  outlets (up to 9).  Add descriptions to new and some old variables
	  and commands.  Add "bypass.start" command, for enabling bypass. For
	  returning in On-Line mode exec "load.on" command.  Additional
	  checks of UPS vars. Now add zero var only if it could be changed.

2015-04-01  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: Workaround input.{power,realpower} for Eaton
	  ePDUs  Add variable declarations to handle missing
	  input.{power,realpower} on Eaton ePDUs G2 and G3 1phase. On 3phase,
	  these variables point at SNMP OIDs that sum up the 3 phases
	  information. These OIDs should also be present on 1phase, however
	  it's actually not the case. So simply duplicate the L1 declaration

2015-03-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powerware-mib.c: Implement battery.charger.status for Eaton
	  SNMP  This new official variable now replaces the historic
	  'vendor.specific.abmstatus', as per other similar implementations
	  (in usbhid-ups and bcmxcp drivers)

2015-03-27  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Implement Eaton ABM support for USB/HID units
	  Add support for Eaton Advanced Battery Monitoring, for USB/HID
	  units. Information are provided through the new
	  battery.charger.status. For now, at least, when ABM is enabled, the
	  historic CHRG and DISCHRG flags are not published anymore in
	  ups.status

2015-03-26  Stuart Henderson <stu@spacehopper.org>

	* data/driver.list.in, docs/man/snmp-ups.txt, docs/snmp-
	  subdrivers.txt, drivers/Makefile.am, drivers/huawei-mib.c,
	  drivers/huawei-mib.h, drivers/snmp-ups.c: snmp-ups: new subdriver
	  for Huawei  "Hi, the [commit] below adds a new subdriver for snmp-
	  ups to support Huawei UPS, based on an observed walk from a
	  UPS5000-E with a few bits filled in from the MIBs (copy at
	  http://junkpile.org/HUAWEI_UPS_MIB/)."  http://news.gmane.org/find-
	  root.php?message_id=slrnmh6npf.tg7.stu%40naiad.spacehopper.org

2015-03-25  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx_voltronic.c: nutdrv_qx: add support in
	  'voltronic' subdriver for P13 protocol

2015-03-24  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Complementary Energy Saving data for Eaton USB
	  devices  Add a 2nd HID path for battery.energysave.delay. Depending
	  on the exact device model, different implementations may be used

2015-03-22  Daniele Pezzini <hyouko@gmail.com>

	* NEWS: nutdrv_qx: update NEWS about new 'fuji' USB subdriver

2015-03-21  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: typedef
	  testing_t only if TESTING is #defined  First reported by GitHub
	  user @nickma82
	* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
	  document 'voltronic-qs-hex' subdriver in man pages
	* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx_bestups.c,
	  drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
	  common.h, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-
	  old.c, drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
	  drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
	  drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c:
	  nutdrv_qx: add 'ignoresab' flag to support bogus devices  Some
	  UPSes incorrectly report the 'Shutdown Active' bit (7th bit of the
	  'status byte') as always on (=1), consequently making the driver
	  believe the UPS is nearing a shutdown (and, as a result, ups.status
	  always contains FSD). To workaround this issue, add a new
	  'ignoresab' flag that makes the driver do just what its name tells
	  (IGNORE Status Active Bit) skipping the relative item in qx2nut
	  tables.  References: -
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2015-March/006896.html -
	  https://github.com/networkupstools/nut/issues/195

2015-03-11  Arnaud Quette <arnaud.quette@free.fr>

	* data/cmdvartab, docs/nut-names.txt: Add some new variable names,
	  related to ePDUs  Add new variables names, related to ePDUs, such
	  as input.*.load, input.*.realpower and input.*.power
	* drivers/eaton-mib.c: Minor update to comments

2015-02-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: Fix outlet.{power,realpower} data mapping
	  According to the new mapping using the input collection, these two
	  data mapping were targeting at the wrong OIDs.

2015-02-03  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: Fix and complete a bit Eaton ePDUs support
	  Add some new data mapping to improve support for Eaton ePDUs. This
	  commit includes some new NUT data names that requires approval
	  before being merged

2015-03-19  Arnaud Quette <arnaud.quette@free.fr>

	* data/cmdvartab, docs/nut-names.txt, drivers/mge-hid.c: Add more
	  Energy Saving features for Eaton USB devices  Add two new Energy
	  Saving features: - battery.energysave.delay: to configure the delay
	  before switching off the UPS if running on battery and load level
	  low (in minutes) - battery.energysave.realpower: to switch off the
	  UPS if running on battery and power consumption on UPS output is
	  lower than this value (expressed in Watts). Note that documentation
	  in nut-names.txt and cmdvartab was limited to difference with an
	  upcoming branch merge, that will add the others
	* drivers/mge-hid.c: Align Energy Saving variable names  Change
	  ups.load.energysave to battery.energysave.load, to be coherent with
	  the latest commit made in the bcmxcp driver

2015-03-10  Arnaud Quette <arnaud.quette@free.fr>

	* data/cmdvartab, drivers/mge-hid.c: Add a new EnergySaving threshold
	  for Eaton UPSs  Add 'ups.load.energysave' parameter, to enable
	  energy saving when the power consumption on the UPS output drops
	  below this value (in percent). This new variable however requires
	  to go through the NUT RFC process to get approved

2015-03-19  Arnaud Quette <arnaud.quette@free.fr>

	* tools/Makefile.am: Also distribute nut-ddl-dump.sh helper script

2015-03-18  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: EUROCASE EA200N 2000VA supported by
	  nutdrv_qx  Protocol: 'megatec' USB subdriver: 'fuji'  Reference: ht
	  tp://thread.gmane.org/gmane.comp.monitoring.nut.user/8808/focus=908
	  1
	* drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_blazer-common.c,
	  drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
	  drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
	  drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
	  drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c:
	  nutdrv_qx: remove redundancy in blazer-common-dependent subdrivers
	  Since main nutdrv_qx driver already sets an alarm when FSD arises
	  (see nutdrv_qx.c>ups_alarm_set()), there is no need to do so in the
	  various subdrivers. So, in order to prevent a duplicated alarm
	  message, remove all unneeded code from the affected subdrivers (all
	  the ones that depend on nutdrv_qx_blazer-common).

2015-03-17  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: update Mecer ME-1000-WTU (supported by
	  nutdrv_qx)  Tested by @sliverc (Oliver Sauder) on NUT 2.7.1
	  Reference: https://github.com/networkupstools/nut/issues/148

2015-03-16  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: document USB subdrivers'
	  glitches
	* drivers/nutdrv_qx.c: nutdrv_qx: add workaround in 'fuji' subdriver
	  to support all shutdown.returns  As 'fuji' subdriver discards all
	  the commands of more than 3 characters, in order to support 'SnRm'
	  shutdown.returns (and hence the standard 'S.5R0003' shutdown.return
	  with DEFAULT_{ON,OFF}DELAYs) map 'SnRm' shutdown.returns to the
	  corresponding 'Sn' commands, meanwhile ignoring ups.delay.start and
	  making the UPS turn on the load as soon as power is back.
	* drivers/nutdrv_qx.c: nutdrv_qx: fix command handling in 'fuji'
	  subdriver  'fuji' subdriver supported devices only allow one 8
	  bytes interrupt as a command/query: make the subdriver discard (and
	  echo back) all the too long commands.

2014-11-08  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: update man for the new 'fabula'
	  and 'fuji' USB subdrivers

2014-06-26  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: add new 'fuji' USB subdriver  Add a
	  new USB subdriver ('fuji') to support models manufactured by Fuji
	  (and others) and accompained by UPSmart2000I software.

2015-03-15  Charles Lepple <clepple+nut@gmail.com>

	* docs/developers.txt, docs/new-drivers.txt: doc: document build
	  dependencies, etc.  Closes:
	  https://github.com/networkupstools/nut/issues/189
	* docs/nutdrv_qx-subdrivers.txt: doc: fold a few long preformatted
	  lines in nutdrv_qx developer guide
	* docs/FAQ.txt: docs: FAQ update  This addresses several issues: *
	  https://github.com/networkupstools/nut/issues/19 *
	  https://github.com/networkupstools/nut/issues/191  and  Closes:
	  https://github.com/networkupstools/nut/issues/161
	* docs/man/Makefile.am: docs/man: provide additional detail for
	  missing asciidoc/a2x error
	* configure.ac: configure: indicate required version of
	  Asciidoc/A2X/dblatex  Still doesn't address data-only packages like
	  docbook-xsl, so leaving this issue open.  Reference:
	  https://github.com/networkupstools/nut/issues/162
	* docs/Makefile.am, docs/man/Makefile.am: Pass --nonet to xsltproc
	  This prevents xsltproc from downloading DocBook XSL files for each
	  step in the documentation build process.  Reference:
	  https://github.com/networkupstools/nut/issues/172  Still need to
	  document what to do if the build fails.

2015-03-10  Arnaud Quette <arnaud.quette@free.fr>

	* docs/documentation.txt: Reference DDL on the Documentation page
	  Add a reference to the NUT Devices Dumps Library (DDL) on the
	  Documentation page, both for the website and the distributed
	  documentation. There are separate references, to distinguish the
	  DDL interest from a user and a developer point of view

2015-03-06  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-ddl-dump.sh: First stab at a helper script to generate
	  device dumps  This preliminary version only generates .dev (static)
	  dump files. However, a merge with nut-recorder.sh, which generates
	  .seq files (dynamic simulation) is to be considered, along with an
	  improved version for the newer .nds format

2015-02-24  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: CPS Value 1500ELCD-RU @ 2.6.3  Source:
	  http://news.gmane.org/find-
	  root.php?message_id=1423241134.6830.8.camel%40ignatev
	* data/driver.list.in: HCL: JAWAN JW-UPSLC02 with blazer_usb @ 2.7.2
	  Source: http://news.gmane.org/find-root.php?message_id=SNT404%2dEAS
	  8312A94DDAF0FAD4B7702BA52A0%40phx.gbl

2015-02-22  Charles Lepple <clepple+nut@gmail.com>

	* scripts/python/app/NUT-Monitor, scripts/python/app/gui-1.3.glade:
	  NUT-Monitor: updated version to 1.3.1

2015-02-14  Charles Lepple <clepple+nut@gmail.com>

	* NEWS, UPGRADING: NEWS/UPGRADING for 2.7.3

2015-02-14  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: specify 'bestups' ranges in man
	  pages

2015-01-03  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx_bestups.c: nutdrv_qx: bestups - add support for
	  'M' query

2014-11-02  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
	  update man pages for new 'bestups' subdriver
	* drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_bestups.h:
	  nutdrv_qx: add BestUPS subdriver (protocol=bestups)  A subdriver
	  using Best Power/Sola Australia protocol as described in
	  http://www.networkupstools.org/protocols/sola.html Based also on
	  bestups.c and meant to eventually replace it.

2015-02-14  Michael Fincham <michael.fincham@catalyst.net.nz>

	* scripts/python/app/NUT-Monitor: Correct unsafe permissions on
	  ~/.nut-monitor (Debian #777706)  fix-permissions-on-start.debdiff
	  from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=777706#24
	  Closes: https://github.com/networkupstools/nut/issues/185

2015-02-14  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c: apcsmart: fix SEGV in apc_getcaps()  ups ...

2015-02-13  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: fix command set
	  parsing for protocol version 4  The issue was discovered with
	  Smart-UPS RT 10000 XL by surr, see
	  https://github.com/networkupstools/nut/issues/180  When protocol
	  version is 4, command set query returns string with additional
	  section after another '.' .  This patch updates the code to handle
	  such string as well.

2015-02-10  Charles Lepple <clepple+nut@gmail.com>

	* configure.ac: configure.ac: bump version to 2.7.2.6 for snapshots
	* scripts/upower/95-upower-hid.rules: upower: regenerate for Powercom
	  PID 0001 (PR #121)
	* configure.ac: configure.ac: add bug report URL  Should be
	  compatible with Autoconf 2.59 and newer.

2015-02-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/netvision-mib.c: Improve support for on-battery detection
	  Add support for upsAlarmOnBattery OID, to better detect on-battery
	  events (reported by Henning Fehrmann)
	* drivers/libhid.c, drivers/libhid.h: Fix compilation warning related
	  to sign comparison

2015-01-31  Ryan Underwood <nemesis@icequake.net>

	* drivers/apc-hid.c, scripts/upower/95-upower-hid.rules: Add a
	  product ID for APC AP9584 USB kit.  Resolves
	  networkupstools/nut#181

2015-01-12  Charles Lepple <clepple+nut@gmail.com>

	* scripts/upower/95-upower-hid.rules: upower: regenerate rules file
	  for OpenUPS PID 0xd005
	* Makefile.am: Add systemd unit dir fix for 'make distcheck'

2015-01-11  Sergey Kvachonok <ravenexp@gmail.com>

	* configure.ac: Undo ${systemdsystemunitdir} mangling.  Running sed
	  's/\/lib/\${libdir}/' destroys any ${systemdsystemunitdir} values
	  that don't start with '/lib' e.g. '/usr/lib64/systemd/system'
	  becomes '/usr/usr/lib6464/systemd/system'.  If a local installation
	  prefix is needed use appropriately prefixed --with-
	  systemdsystemunitdir='' parameter instead.

2015-01-02  Charles Lepple <clepple+nut@gmail.com>

	* docs/cables.txt, docs/config-notes.txt, docs/configure.txt,
	  docs/features.txt, docs/history.txt, docs/man/nutdrv_qx.txt,
	  docs/nut-names.txt, docs/scheduling.txt, docs/security.txt: docs:
	  typo fixes

2015-01-01  Charles Lepple <clepple+nut@gmail.com>

	* docs/cables.txt: docs: MGE NMC pinout  Closes
	  https://github.com/networkupstools/nut/issues/141
	* docs/cables.txt: docs: Best Power cable pinout  Closes
	  https://github.com/networkupstools/nut/issues/164
	* INSTALL.nut: docs: clarify group ownership of directory in
	  INSTALL.nut  Closes
	  https://github.com/networkupstools/nut/issues/151
	* docs/man/dummy-ups.txt: docs: dummy-ups repeater mode requires `@`
	  in port name  Also reworded parts of the man page.

2014-12-17  bsalvador <bruno.salvador@gmail.com>

	* drivers/solis.c: Update solis.c to force ScanReceivePack()

2014-12-12  Andy Juniper <ajuniper@freeuk.com>

	* clients/upslog.c, docs/man/upslog.txt: upslog: break out of sleep
	  on SIGUSR1 and log immediately  Reference:
	  http://news.gmane.org/find-
	  root.php?message_id=54863D44.3000902%40freeuk.com

2014-11-25  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: additional NHS models

2014-11-17  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: NHS Sistemas de Energia: Expert C
	  Isolador series  Source: http://news.gmane.org/find-root.php?messag
	  e_id=CADe06rfE5MA%3dyWDZzofPsC7TOgGOU4TRSoi67uMXedymA9L7ow%40mail.g
	  mail.com

2014-11-07  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/subdriver/gen-snmp-subdriver.sh: Various minor fixes to the
	  SNMP subdriver generator

2014-11-06  Charles Lepple <clepple+nut@gmail.com>

	* drivers/openups-hid.c: openups-hid: Fix scale factors for 0xd005
	  (0.4)  Previous commit had extra scale factors applied.
	* drivers/openups-hid.c, drivers/openups-hid.h: openups-hid: voltage
	  scale factors based on product IDs
	* drivers/openups-hid.c: openups-hid: remove a const; this will
	  require more thought  The USB matching routines should have their
	  parameters marked as "const" to indicate that they do not modify
	  the matching tables, but that will require more invasive changes.
	  Roll this back for now.

2014-11-05  Charles Lepple <clepple+nut@gmail.com>

	* drivers/openups-hid.c: openups-hid: const and float/double fixups
	  (0.2)
	* drivers/openups-hid.c: openups-hid: add USB ProductID d005 for
	  OpenUPS2

2014-11-05  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am: Store the git start point as a variable  For
	  ChangeLog, we now store the git start point (older reference) in a
	  separate variable, to make the process more clear

2014-10-31  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: Update VMware ESXi package link (from René
	  Garcia)

2014-10-29  Charles Lepple <clepple+nut@gmail.com>

	* scripts/upower/95-upower-hid.rules: upower: Update Belkin and
	  Liebert rules  Follow-up to issue #159.
	* drivers/belkin-hid.c, drivers/liebert-hid.c: usbhid-ups: comments
	  describing Belkin/Liebert/Phoenixtec situation  Follow-up to issue
	  #159.
	* data/driver.list.in: HCL: Rucelf UPOII-3000-96-EL supported by
	  blazer_ser  Manufacturer:
	  http://www.rucelf.ua/en/catalog/upoii-3000-96-el/  Closes:
	  https://github.com/networkupstools/nut/issues/165

2014-10-28  Elio Parisi <E.Parisi@riello-ups.com>

	* drivers/riello_usb.c: riello_usb: explicitly claim USB interface
	  Reference: http://news.gmane.org/find-root.php?message_id=7731ed2f9
	  8014b8a90e695a06d077970%40AM3PR07MB289.eurprd07.prod.outlook.com
	  and https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=738122

2014-10-20  Elio Parisi <E.Parisi@riello-ups.com>

	* drivers/riello_usb.c: riello_usb: timeouts and error handling
	  (0.03)  Small changes in riello_usb.c that solved some problem with
	  managing transmission errors between the Raspberry Pi and Riello
	  ups (thanks to Fredrik Öberg): introducing timeout in reading ups
	  data in cypress_command; enhanced handling error codes
	  http://news.gmane.org/find-root.php?message_id=f5294e5579574bcbaf5c
	  dd95523e0b68%40AM3PR07MB289.eurprd07.prod.outlook.com
	* drivers/riello_ser.c: riello_ser: enhanced handling error codes
	  (0.03)

2014-10-20  Charles Lepple <clepple+nut@gmail.com>

	* docs/.gitignore: docs: docinfo.xml is now auto-generated

2014-10-20  Nik Soggia <nut@niksoggia.it>

	* drivers/Makefile.am: missing -lm in drivers/Makefile.am  Both
	  bcmxcp and bcmxcp_usb use ldexp(), so both need `-lm`.
	  http://news.gmane.org/find-
	  root.php?message_id=544515BA.4060804%40niksoggia.it

2014-10-10  Paul Chavent <paul.chavent@onera.fr>

	* drivers/belkin-hid.c: drivers : add Liebert GXT3 device.
	* drivers/main.c: drivers : fix possible memory leak.  In arguments
	  parsing, if user option is passed.

2014-09-30  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c: apcsmart: increase passes in setvar_enum()
	  Current 6 is not enough for bigger units - especially if we swap to
	  the value directly preceeding the current setting.

2014-09-27  Daniele Pezzini <hyouko@gmail.com>

	* configure.ac, docs/Makefile.am, docs/docinfo.xml,
	  docs/docinfo.xml.in: docs: add NUT version number/date in PDF
	  documents  Reference:
	  https://github.com/networkupstools/nut/issues/150
	* docs/chunked.xsl, docs/common.xsl, docs/xhtml.xsl: docs: move
	  DocBook options common to html stylesheets to common.xsl
	* docs/Makefile.am, docs/common.xsl: docs: add NUT version
	  number/date into footer of HTML pages  Reference:
	  https://github.com/networkupstools/nut/issues/150

2014-09-28  Arnaud Quette <arnaud.quette@free.fr>

	* docs/configure.txt: Clarify a bit more Avahi build requirements
	* tools/nut-scanner/Makefile.am: Don't reference subdir-object with
	  $(top_srcdir)  Replace references to objects in separate
	  directories that were using $(top_srcdir) by the expanded version
	  '../../'. The variable was otherwise part of the path, resulting in
	  build failures. This completes commit f8abb9b  Closes
	  networkupstools/nut#155
	* configure.ac: Explicitly use subdir-objects in automake init
	  Closes networkupstools/nut#155

2014-09-27  Arnaud Quette <arnaud.quette@free.fr>

	* configure.ac, m4/nut_check_asciidoc.m4: Also check for source-
	  highlight at configure time  source-highlight is used for
	  documentation generation. It's however optional, so we just check
	  for the sake of completion

2014-09-27  Arnaud Quette <arno@arno-zbook15.euro.ad.etn.com>

	* docs/man/Makefile.am, docs/man/asciidoc.conf: Add NUT version
	  number into footer of HTML man pages  Override AsciiDoc default for
	  footer-txt to include NUT version number into footer of HTML man
	  pages. This commit addresses the 2nd point of
	  networkupstools/nut#150

2014-09-26  Charles Lepple <clepple+nut@gmail.com>

	* drivers/tripplite_usb.c: tripplite_usb: set input.voltage.nominal
	  back to 230V (0.30)  Keeps the input.voltage and output.voltage
	  scaling from 0.28  Discussion:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/8719

2014-09-26  Arnaud Quette <arnaud.quette@free.fr>

	* conf/upsmon.conf.sample.in, docs/man/nut.conf.txt,
	  docs/man/upsmon.conf.txt, docs/packager-guide.txt: Replace outdated
	  references to shutdown.txt  shutdown.txt was merged into config-
	  notes.txt during the AsciiDoc conversion of the whole documentation
	  and website. This content is now available in the docs/config-
	  notes.txt file, section [[UPS_shutdown]] "Configuring automatic
	  shutdowns for low battery events"
	* conf/upsmon.conf.sample.in: Fix default value of POWERDOWNFLAG
	  POWERDOWNFLAG path changed from the hard-coded value /etc/killpower
	  to the build-time generated @CONFPATH@/killpower. This resulted in
	  an unexpected value '/etc/nut/killpower', at least on Debian.
	  (reported by Laurent Bigonville)  Closes networkupstools/nut#74

2014-09-25  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: move to ltrim_m()/rtrim_m()
	  functions
	* common/common.c, include/common.h: Add ltrim_m()/rtrim_m()
	  functions to trim several chars at the same time  Also, make
	  ltrim() / rtrim() wrappers around ltrim_m() / rtrim_m().
	* common/common.c: Make ltrim() modify the input string  Also, always
	  check string length in both ltrim() and rtrim().  Reference:
	  https://github.com/networkupstools/nut/issues/154

2014-09-25  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: sort Tripp Lite models by name, then
	  increasing power  I know this doesn't allow the cell merging code
	  to do as much, but this should make it easier to find models.
	* data/driver.list.in: HCL: add Tripp Lite OMNIVSINT800
	  (tripplite_usb)  Source:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/8713
	* drivers/tripplite_usb.c: tripplite_usb: scale min/max voltages for
	  SMART protocol (0.29)  Observed in a dump file from driver version
	  0.11. Scale input.voltage.minimum and input.voltage.maximum the
	  same way as other voltages.
	* drivers/tripplite_usb.c: tripplite_usb: fix voltage scaling for
	  240V/1001 (0.28)  Reported by Dave Williams:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/8713  The
	  input.voltage and output.voltage scaling for Protocol 1001 did not
	  factor in the input_voltage_scaled value.

2014-09-24  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/python/app/nut-monitor.appdata.xml: Fix compliance of NUT-
	  Monitor FreeDesktop AppData file  Following the upstream update (by
	  David Goncalves), update the screenshots width and height to
	  conform to AppData specification:
	  http://people.freedesktop.org/~hughsient/appdata/  Closes
	  networkupstools/nut#127

2014-05-18  Charles Lepple <clepple+nut@gmail.com>

	* drivers/genericups.c: genericups: log cable type overrides as they
	  are parsed  Fixes networkupstools/nut#28  Better than nothing, but
	  without a unit to test against, I don't want to make any more
	  intrusive changes.

2014-09-17  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-qa.txt: Minor update and completion  Use the new Debian
	  package tracker URL and add Redhat / Fedora bug tracker

2014-09-15  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: add devices supported by nutdrv_qx  -
	  Fideltronik LUPUS 500 USB Protocol: 'megatec' USB subdriver:
	  'fabula' Reference: http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2014-June/009059.html  - FTUPS FT-1000BS(T) / Voltronic
	  Power Apex 1KVA Protocol: 'voltronic-qs-hex' USB devices -> USB
	  subdriver: 'cypress'  - FTUPS FT-1000BS / Voltronic Power Imperial
	  1KVA Protocol: 'voltronic-qs' USB devices -> USB subdriver:
	  'cypress'

2014-07-11  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: improve the USB matching procedure
	  Consider also the iManufacturer/iProduct strings when checking
	  devices (if subdriver is not specified) to assign the right
	  subdriver in case the VID:PID couple is not specific enough.

2014-06-30  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: add new 'fabula' USB subdriver  Add
	  a new USB subdriver ('fabula') to support models
	  manufactured/rebranded by Fideltronik and accompained by
	  UPSilon2000 software.  Reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2014-June/009059.html

2014-09-03  Daniele Pezzini <hyouko@gmail.com>

	* drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-
	  qs-hex.h: nutdrv_qx: add Voltronic-QS-Hex subdriver
	  (protocol=voltronic-qs-hex)  A subdriver using a protocol, specific
	  to UPSes manufactured by Voltronic Power, partially Hex-encoded
	  (e.g. 'QS' reply) and supporting some megatec commands.
	* docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: update docs about added
	  support for more complex UPS answers
	* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h,
	  drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
	  drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
	  drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs.c,
	  drivers/nutdrv_qx_voltronic.c, drivers/nutdrv_qx_zinto.c:
	  nutdrv_qx: add basic support for more complex UPS answers  Add
	  support (also in 'TESTING' mode) for '\0' chars in raw UPS answers
	  and the ability to preprocess answers before anything else (e.g.:
	  for CRC, decoding, ...). Increase verbosity of USB subdrivers and
	  serial communication. Always print also the return code when
	  dealing with an error. Update all subdrivers accordingly, bump
	  versions.

2014-09-08  Charles Lepple <clepple+nut@gmail.com>

	* docs/documentation.txt: docs: Add link to Roger Price's openSUSE
	  writeup

2014-09-04  Daniele Pezzini <hyouko@gmail.com>

	* drivers/nutdrv_qx.c: nutdrv_qx: prevent a vicious loop when
	  unexpected answers happen  If a 'QX_FLAG_QUICK_POLL' item gets an
	  unexpected (non-empty) answer and, after returning from
	  'qx_ups_walk()', it is not followed by at least one item using a
	  different 'command', the driver will loop endlessly using the same
	  'broken' answer instead of trying to get a new one from the UPS. To
	  solve this issue, make sure to have an empty 'previous_item' when
	  starting 'qx_ups_walk()'. Also, bail out of 'qx_ups_walk()' when a
	  'QX_FLAG_QUICK_POLL' item can't be preprocessed properly through
	  'ups_infoval_set()'.

2014-09-04  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/asem.txt: docs: recommend I2C bus name for asem driver

2014-09-03  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nut-scanner.txt: Fix typo error in nut-scanner doc  The
	  example network range scanned when using 192.168.0.0/25 is actually
	  192.168.0.0 to 192.168.0.12*7* not (i.e. not .128) as previously
	  stated (reported by Evgeny 'Jim' Klimov)  Closes
	  networkupstools/nut#144

2014-09-02  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in, drivers/belkin-hid.c: HCL: Belkin Regulator
	  PRO-USB 050d:0f51 (0.17)
	  https://github.com/networkupstools/nut/issues/149

2014-08-22  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Mecer ME-100-WTU with blazer_usb  USB
	  VID:PID = 0665:5161  Tested by @silvec (Oliver Sauder) on NUT 2.6.3
	  Reference: https://github.com/networkupstools/nut/issues/148

2014-08-19  Charles Lepple <clepple+nut@gmail.com>

	* docs/documentation.txt: docs: update links for two articles

2014-08-17  Charles Lepple <clepple+nut@gmail.com>

	* tools/nut-usbinfo.pl: nut-usbinfo: fix FreeBSD devd.conf to use
	  $cdev
	* scripts/upower/95-upower-hid.rules: 95-upower-hid.rules: updated by
	  nut-usbinfo.pl  URL updated in previous commit.
	* tools/nut-usbinfo.pl: nut-usbinfo: change link from Alioth SVN to
	  GitHub
	* scripts/udev/.gitignore: udev: ignore 62-nut-usbups.rules  Follow-
	  up commit to networkupstools/nut#140

2014-08-17  Yann E. MORIN <yann.morin.1998@free.fr>

	* conf/Makefile.am: conf/: fix parallel install  Do not reference the
	  upsmon.conf.sample twice, otherwise install, with a high number of
	  make jobs, may fail, like so: http://autobuild.buildroot.net/result
	  s/256/2567e13cd5bc702bc3a38a1d6fc8e34022cc7db5/build-end.log   ---
	  This is not a rare occurence, as my testing managed to trigger the
	  issue in about 1 test out of 10 on average, on a not-so-fast
	  machine.

2014-08-16  Charles Lepple <clepple+nut@gmail.com>

	* tools/nut-usbinfo.pl: nut-usbinfo: ignore *.orig files

2014-08-14  Émilien Kia <emilien.kia@gmail.com>

	* configure.ac, docs/man/Makefile.am, m4/nut_check_asciidoc.m4: Test
	  presence of xmllint for manpages doc generation.
	* configure.ac, docs/man/Makefile.am, m4/nut_check_asciidoc.m4: Test
	  presence of xsltproc for manpages doc generation.

2014-08-04  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/ups.conf.txt, drivers/libusb.c: Remove redundant
	  usb_set_altinterface(), unless user requests it  Adds flag/value to
	  USB driver options.  Closes networkupstools/nut#138

2014-08-09  Charles Lepple <clepple+nut@gmail.com>

	* drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
	  drivers/tripplite_usb.c, drivers/usb-common.h, drivers/usbhid-
	  ups.c: libusb.c: consolidate USB-related addvar() calls
	* drivers/cps-hid.c: usbhid-ups (CPS): determine battery.voltage
	  scale factor at runtime  If the battery.voltage reading is greater
	  than 1.4x battery.voltage.nominal, apply a scale factor of 2/3 to
	  bring the voltage back in line.  Closes networkupstools/nut#142

2014-08-08  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nut-scanner.txt: Fix typo error  Fix a typo error on "-B"
	  option (reported by Evgeny 'Jim' Klimov)

2014-08-05  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/python/Makefile.am: Distribute FreeDesktop AppData file for
	  NUT Monitor  FreeDesktop AppData file for NUT Monitor was not
	  distributed, waiting for some approval

2014-08-01  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/udev/Makefile.am, scripts/udev/README: Fix USB permission
	  issues related to Linux / udev  Rename udev rules file to 62-nut-
	  usbups.rules, to prevent NUT USB privileges from being overwritten
	  Closes #140
	* docs/cables.txt: Fix typo error on Eaton / MGE USB-RJ45 cable

2014-07-14  Charles Lepple <clepple+nut@gmail.com>

	* scripts/Aix/.gitignore: Ignore generated AIX spec file

2014-07-14  Giuseppe Corbelli <giuseppe.corbelli@copanitalia.com>

	* AUTHORS, docs/man/asem.txt: asem: additional documentation
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6741

2014-07-13  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/upscli_get.txt: upscli_get(): mention SIGPIPE handling
	  Closes: #132
	* data/driver.list.in: HCL: distinguish between Tripp Lite old and
	  new protocol 3005

2014-07-13  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/python/app/nut-monitor.appdata.xml: Complete FreeDesktop
	  AppData file for NUT Monitor  As per Richard Hughes comments, in
	  #127, complete the description field

2014-07-12  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/Aix/nut-aix.spec.in: Minor adjustments as per Github
	  comments
	* docs/configure.txt: Add missing documentation for configure option
	  The new asem driver introduced --with-linux_i2c, for which
	  documentation was missing in configure documentation

2014-07-11  Charles Lepple <clepple+nut@gmail.com>

	* NEWS, data/driver.list.in, docs/man/Makefile.am, docs/man/asem.txt,
	  docs/man/index.txt: asem: documentation

2014-07-07  Giuseppe Corbelli <giuseppe.corbelli@copanitalia.com>

	* configure.ac, data/driver.list.in, drivers/Makefile.am,
	  drivers/asem.c: Support for ASEM UPS on Linux/i2c  Patch from
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6723
	  Thread: http://news.gmane.org/find-
	  root.php?message_id=53A83FCB.1080808%40copanitalia.com  Builds on
	  Ubuntu 12.10 and 14.04; requires libi2c-dev

2014-07-05  Charles Lepple <clepple+nut@gmail.com>

	* drivers/tripplite_usb.c: tripplite_usb: fix typos in bin2d() and
	  control_outlet() (0.27)
	* drivers/tripplite_usb.c: tripplite_usb: control_outlet() for
	  protocol 3005 (0.26)
	* drivers/tripplite_usb.c: tripplite_usb: Additional 3005 protocol
	  support (0.25)  http://news.gmane.org/find-root.php?message_id=CAFe
	  iwyG8HCfg%2dQqxcwhnm1Yo0z0F0BLyOPCYX%2d4yMMFg8sB4QQ%40mail.gmail.co
	  m
	* drivers/tripplite_usb.c: tripplite_usb: basic support for 3005
	  binary protocol (0.24)  Based on logs from SMART500RT1U

2014-07-04  vesnn <metanoite@rambler.ru>

	* drivers/powercom.c: Update powercom.c  Fix Powercom Imperial
	  initialization for models since 2009 with USB interface.

2014-06-23  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/python/app/nut-monitor.appdata.xml: Create a FreeDesktop
	  AppData file for NUT Monitor  appData files provide to users long
	  descriptions, screenshots and other useful information on
	  application. This will mainly serve for Software Center like
	  applications

2014-06-19  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Lacerda New Orion 800VA with blazer_usb
	  http://news.gmane.org/find-root.php?message_id=CANDysWwqgTUMYU03QbP
	  T8JxEtLd38mvwfTMMhZqS%3d%2diGpdvJDA%40mail.gmail.com

2014-06-17  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: add APC-Microsol entry for solis
	* drivers/solis.c: solis: silence clang warnings about extra
	  parentheses  Since we're in the neighborhood (#133)...  Typically,
	  the idiom is either:  if ( a == b )  for equality checking, or:  if
	  ( ( a = b ) )  for assignment with a comparison.
	* drivers/solis.c, drivers/solis.h: solis: eliminate fixed-length
	  string buffer for model name  The new APC model name overflows the
	  buffer. (#133)

2014-06-16  bsalvador <bruno.salvador@gmail.com>

	* drivers/solis.c: Update on solis.c to add more support  to Back-UPS
	  1200BR
	* drivers/solis.c: Update solis.c to support Microsol-APC Unit.
	  Added support to Back-UPS 1200BR (Microsol-APC) unit.

2014-06-15  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/upscli_get.txt, docs/man/upscli_list_next.txt,
	  docs/man/upscli_list_start.txt: docs: synchronize upscli_*
	  numq/numa with header  There were a few leftover signed int
	  parameters in the man pages, but the headers and implementation use
	  'unsigned int'.  Closes:
	  https://github.com/networkupstools/nut/issues/131
	* docs/man/solis.txt: docs: mention APC in Microsol driver man page
	* docs/man/apcsmart.txt: docs: point APC Microsol users from apcsmart
	  to solis  Also make some of the formatting and grammar self-
	  consistent.
	* drivers/solis.c: solis: recognize APC BZ1200-BR and BZ2200BI-BR
	  (0.62)  Patch suggested by Bruno Salvador for BZ1200-BR, and also
	  tested by Douglas A. Augusto on BZ2200BI-BR.  Reference: *
	  http://forums.freenas.org/index.php?threads/nobreak-bz1200-br-back-
	  ups-rs-1200va-600w-bivolt-115-nt.20247/ *
	  http://news.gmane.org/find-root.php?message_id=CACu22%2d3Nn2R%3dQQe
	  9uy%5fPXHRduaPaFgCp2Sw4ra57Ow2qDQcOJQ%40mail.gmail.com

2014-06-08  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/subdriver/gen-snmp-subdriver.sh: Inline documentation fixes

2014-06-03  george <rpubaddr0@gmail.com>

	* scripts/python/module/PyNUT.py: Fixed version description.
	* scripts/python/module/PyNUT.py: Added author information, bumped
	  version.  According to the semantic versioning scheme
	  (http://semver.org/), adding features that do not break backwards
	  compatibility with previous releases means that the minor version
	  number should be incremented.
	* scripts/python/module/PyNUT.py: Change format of raise keyword.
	  Fixes PyNUT Python 3 compatibility.
	* scripts/python/module/PyNUT.py: PyNUT: Create a custom exception
	  class.  This maintains backwards compatibility, and allows calling
	  programs to use "except PyNUTError" instead of "except Exception"
	  when using PyNUT methods.  See
	  https://wiki.python.org/moin/HandlingExceptions for more
	  information.
	* scripts/python/module/PyNUT.py: Fix error when raising without an
	  Exception.  Raising without a valid exception is invalid:  >>>
	  raise Traceback (most recent call last): File "<stdin>", line 1, in
	  <module> TypeError: exceptions must be old-style classes or derived
	  from BaseException, not NoneType >>> raise Exception Traceback
	  (most recent call last): File "<stdin>", line 1, in <module>
	  Exception  Changing this to "raise Exception" fixes this problem.

2014-06-01  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/tripplite_usb.txt, drivers/tripplite_usb.c: tripplite_usb:
	  last tweaks, for now.  Initialize bv_12V to a dummy value, since
	  gcc can't see that it is used in the union of both conditionals
	  where it is set.  Also, align the documentation with the strange
	  definition of empty used by the Tripp Lite state-of-charge
	  approximation.
	* drivers/tripplite_usb.c: tripplite_usb: silence warning (0.23)
	  Pedantic, to be sure, but someone might try the driver with a
	  protocol not listed, and sure enough, bv_12V won't be initialized.
	* docs/man/tripplite_usb.txt, drivers/tripplite_usb.c: tripplite_usb:
	  expose battery_min/_max as variables (0.22)
	  http://news.gmane.org/find-
	  root.php?message_id=21370.36829.817425.464627%40godel.bruda.ca

2014-05-27  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: GRAFENTHAL PR-3000-HS supported by snmp-
	  ups  Tested with 2.6.5-3 (0.68) on Windows (IETF MIB 1.4).  Some
	  NUT variables are zero - further testing may be needed.  Reference:
	  http://news.gmane.org/find-root.php?message_id=75FC7A5479BA4A4E8ADF
	  76BC3AD3E568581EC753%40MS03.MACLE.DE

2014-05-23  Charles Lepple <clepple+nut@gmail.com>

	* drivers/tripplite_usb.c: tripplite_usb: use dv/dq charge
	  calculation for all models (0.21)

2014-05-20  Andrew Burdo <zeezooz@gmail.com>

	* drivers/powercom-hid.c: Add comments for some values.
	* drivers/usbhid-ups.c: Reuse variable.
	* drivers/usbhid-ups.c: Add default case.

2014-05-18  Charles Lepple <clepple+nut@gmail.com>

	* scripts/upower/95-upower-hid.rules: upower: regenerate rules file
	  USB VID:PID = 10af:0004  This dependency graph makes my head spin.
	* configure.ac: configure.ac: version to 2.7.2.5 for snapshots

2014-05-13  Daniele Pezzini <hyouko@gmail.com>

	* drivers/compaq-mib.c: compaq-mib: comment out no longer used items
	  As per 31827d5faa86377efb7a92b7aec322cc4c7a275f

2014-05-03  Daniele Pezzini <hyouko@gmail.com>

	* docs/download.txt: docs: add Void Linux in download/Binary packages
	  Reference: https://github.com/networkupstools/nut/issues/125

2014-05-03  Charles Lepple <clepple+nut@gmail.com>

	* docs/Makefile.am: docs: add mge-usb-rj45.jpg to distribution

2014-05-02  Arnaud Quette <arnaud.quette@free.fr>

	* docs/images/cables/mge-usb-rj45.jpg: Add MGE information on USB-
	  RJ45 cable  The illustration matching the previous commit was still
	  needed on the nut repository, and not on the nut-website on
	* docs/cables.txt: Add MGE information on USB-RJ45 cable  These
	  information were provided by MGE years ago, and were waiting for
	  counter testing. Martin De Graaf - Loyer has now fixed this. Note
	  that the matching illustration will be committed on the new nut-
	  website repository

2014-04-29  Andrew Burdo <zeezooz@gmail.com>

	* drivers/powercom-hid.c, drivers/usbhid-ups.c: Bump versions.
	* data/driver.list.in, docs/man/usbhid-ups.txt: Update documentation.
	* drivers/usbhid-ups.c: Reconnect on interrupt read error.
	* drivers/libhid.c, drivers/libhid.h, drivers/powercom-hid.c,
	  drivers/usbhid-ups.c: Reading from the interrupt pipe implies that
	  you use INPUT flagged objects.
	* drivers/powercom-hid.c: Remove erroneous status.
	* drivers/powercom-hid.c: Comment non-compliant variables.

2014-04-17  Andrew Burdo <zeezooz@gmail.com>

	* drivers/libhid.c, drivers/libhid.h, drivers/powercom-hid.c,
	  drivers/usbhid-ups.c: Add support for 0d9f:0001 (USB HID,
	  Powercom).

2014-04-17  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS, UPGRADING, configure.ac: Update for release 2.7.2  Complete
	  the release information for NUT 2.7.2

2014-04-17  Stephen J. Butler <stephen.butler@gmail.com>

	* drivers/tripplite-hid.c: Scale for SMART1500LCDT

2014-04-07  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/compaq-mib.c: Fix erroneous status in HP/Compaq SNMP MIB
	  Using the most recent HP firmware (1.76), erroneous on-battery
	  status were reported. Also disable an erroneous low-battery
	  definition (pointing nowhere), while waiting for actual
	  improvements (report and patch from Philippe Andersson ; Closes
	  networkupstools/nut#117)

2014-04-06  Daniele Pezzini <hyouko@gmail.com>

	* drivers/mge-xml.c: mge-xml: fix compile-time warnings, versioning

2014-04-05  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Numeric Digital 800 plus  USB VID:PID =
	  0665:5161  Reference: networkupstools/nut#115 (blazer_usb @ 2.6.4;
	  waiting for confirmation with nutdrv_qx)
	* data/driver.list.in: HCL: Eaton Powerware 3105 supported by
	  bcmxcp_usb  Closes networkupstools/nut#117
	* data/driver.list.in, drivers/belkin-hid.c: usbhid-ups/belkin-hid:
	  add support for Emerson Network Power Liebert PSI 1440  USB VID:PID
	  = 10af:0004
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/8479

2014-04-05  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/al175.c: Fix data format warnings on all architectures
	  Complete commit 7daa0feb6ed4f1c29bfe14c8e491ba198a4ba643, and
	  actually fix some of the warnings related data format. Also bump
	  al175 driver revision
	* clients/Makefile.am: Update libupsclient library version
	  information  Following the recent export of libcommon functions in
	  libupsclient, update the library version information to 4:0:0

2014-04-04  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/al175.c: Fix data format warnings  Fix a few warnings
	  related data format, in debug code
	* clients/Makefile.am: Add libnutclient library version information
	  Add the missing LDFLAGS for adding version information

2014-03-21  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: [HCL] CABAC UPS-1700DV2 supported by
	  blazer_usb  Reported by jammin84  Closes #113
	* clients/Makefile.am, common/Makefile.am: Link libupsclient with
	  libcommon  Fix undefined references related to functions of
	  libcommon. This issue was reported on Debian:
	  https://bugs.debian.org/731156 (patch from Matthias Klose ; Closes
	  Github issue #73)

2014-03-18  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: [HCL] Digitus DN-170014 supported by
	  richcomm_usb  Reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2014-March/006695.html -or- http://news.gmane.org/find-root.
	  php?message_id=CADq9dvWMx0xBz9XXkVKXCre4ox%2d2kSeHtD7LW39eEDH1RCY8s
	  Q%40mail.gmail.com

2014-03-05  Charles Lepple <clepple+nut@gmail.com>

	* UPGRADING: Added note about --enable-option-checking=fatal  Closes
	  #99 (really)

2014-03-05  Émilien Kia <emilien.kia@gmail.com>

	* scripts/Aix/nut-aix.spec.in: Make web source path independant from
	  specific version.
	* scripts/Aix/nut-aix.spec.in: Use configure-dependant variables
	  instead of statically defined ones for user and group.
	* configure.ac: Use $target_cpu instead of calling uname to know cpu
	  type. Fix crosscompilation.

2013-06-14  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* scripts/Aix/nut-aix.spec.in, scripts/Aix/nut.init: AIX: packaging &
	  init script improvements  (cherry picked from commit
	  ce195e3a2eff1abbd8e192f4d3e278017d7ffb21)

2013-06-12  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* scripts/Aix/nut.init: Fixed client startup detection  (cherry
	  picked from commit 23df5e811cc9008bfa0a37bd174b59890a3760a6)
	* scripts/Aix/nut-aix.spec.in: Fixed AIX RPM specfile  (cherry picked
	  from commit 11ba37bf36dcda0398c8c62fab838dd00e54c5db)

2013-06-11  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* scripts/Aix/nut-aix.spec.in: Allow libneon-based XML driver &
	  scanning for AIX  (cherry picked from commit
	  4c2e89ec584b2015b22f4599d1571c26f2f94e3d)

2013-06-10  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* clients/Makefile.am: Fix of AIX-specific parseconf linking bug
	  Added dummy do_upsconf_args to binaries that use libcommon to
	  satisfy the linker. libcommon links libparseconf, which calls
	  do_upsconf_args supplied from above as an implementation-specific
	  routine.  (cherry picked from commit
	  0078f9383d3a7af4f3edfed6c78de387a12c6b2b)

2013-04-25  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* clients/Makefile.am, clients/upsclient.c, configure.ac:
	  linupsclient: NUT scanning on AIX bugfix  1/ A simmilar bug like in
	  Solaris is in AIX itself---non-blocking connect may return -1 while
	  errno == 0.  Shall be treated as EINPROGRESS. 2/ Linking of
	  libupsclent.so on AIX requires libcommon, otherwise scanning for
	  NUT crashes with SIGSEGV on unresolved usplogx  (cherry picked from
	  commit 16177f99bc995852bb86d2183958f24f11993632)

2013-03-13  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* Makefile.am: AIX packages: make package does the trick  (cherry
	  picked from commit 1d25bd2868339decace5b3028c834746f2824670)

2013-03-12  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* scripts/Aix/nut-aix.spec.in, scripts/Aix/nut.init: AIX packaging:
	  nut-client uninstal bugfix  Packages clean uninstallation
	  (lost/forgotten commit)  (cherry picked from commit
	  f6dd1aec5d2157a3ba3654621fa8e2ac88b060f9)

2013-03-08  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* clients/upsclient.c, configure.ac: Solaris/i386: non-blocking
	  connect WA  (cherry picked from commit
	  d2b466b9ee5402074ccbf7f2967433350affdbcc)

2013-03-04  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* Makefile.am, configure.ac, scripts/Aix/nut-aix.spec.in,
	  scripts/Aix/nut.init: AIX packaging  AIX init script and RPM spec.
	  file added  (cherry picked from commit
	  3851525edcb417f96a5d1c12fb786b85095b54d4)

2014-03-03  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: various updates  * Closes
	  https://github.com/networkupstools/nut/issues/107
	  * http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2013-November/006564.html * http://news.gmane.org/find-
	  root.php?message_id=50D9D460.1080408%40gmail.com
	  * http://news.gmane.org/find-root.php?message_id=CA%2b4duQ%3dppW%2b
	  Pz%2bRVPVXJyFLj0HErh1ZOtm5tk8b6n5Nd5kSk0g%40mail.gmail.com *
	  http://news.gmane.org/find-
	  root.php?message_id=528EC53C.9000801%40me.com
	* docs/nut-qa.txt: NUT QA document: updated and reworded
	* docs/nut-qa.txt: NUT QA document: CR->LF
	* docs/FAQ.txt: FAQ: minor updates  Update the bestfortress entry,
	  fix the mythicbeasts URL, and reword a few entries.

2014-02-13  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/upsimage.cgi.txt: upsimage.cgi(8): update GD homepage

2014-03-03  Émilien Kia <emilien.kia@gmail.com>

	* drivers/nutdrv_qx.h: Detect if TRUE (and FALSE) are already defined
	  and define bool_t accordingly.

2014-02-27  Arnaud Quette <arnaud.quette@free.fr>

	* UPGRADING: Add a note on Hardware Abstraction Layer removal
	* INSTALL.nut, autogen.sh, configure.ac, docs/Makefile.am,
	  docs/configure.txt, docs/developers.txt, docs/features.txt,
	  docs/macros.txt, docs/new-drivers.txt, docs/nut-hal.txt,
	  docs/packager-guide.txt, drivers/Makefile.am, drivers/dstate-hal.c,
	  drivers/dstate-hal.h, drivers/main-hal.c, drivers/main-hal.h,
	  m4/nut_check_libhal.m4, m4/nut_config_libhal.m4: Remove the
	  remaining HAL files and references  Remove the remaining build
	  rules, source code and documentation related to the FreeDesktop
	  Hardware Abstraction Layer (HAL) support. For the record, with this
	  HAL implementation, NUT drivers were sending data over DBus
	  (Closes: #99)

2014-02-24  Charles Lepple <clepple+nut@gmail.com>

	* drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
	  drivers/riello_usb.c, drivers/usbhid-ups.c: OpenBSD ports tree
	  patches for EPROTO  Closes networkupstools/nut#44

2014-02-26  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/Makefile.am, scripts/README, scripts/hal/.gitignore,
	  scripts/hal/Makefile.am, tools/nut-usbinfo.pl: Remove the
	  generation of HAL support files  Remove the code supporting the
	  generation of HAL FDI file. This is the first commit of a set to
	  address Github issue #99
	* drivers/snmp-ups.c: Fix snmp-ups segmentation fault  A basic sanity
	  check was missing in the core code of snmp-ups, causing a driver
	  crash under some specific circumstances, at driver initialisation
	  time. Hence, this does not affect production systems
	* README, UPGRADING, docs/FAQ.txt, docs/config-notes.txt,
	  drivers/Makefile.am, scripts/Solaris/nut.in,
	  scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in,
	  scripts/systemd/nut-driver.service.in,
	  scripts/systemd/nutshutdown.in: Closes #96: Install upsdrvctl to
	  $prefix/sbin  Install upsdrvctl to $prefix/sbin rather than
	  $driverexec. upsdrvctl has been historically standing beside the
	  drivers. It now resides in the system binaries ($prefix/sbin)
	  directory

2014-02-25  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Add improved support for Eaton 5P  Add the
	  necessary hooks to improve support for Eaton 5P range. This
	  includes post-processing of the model name, along with handling
	  rules for battery voltage (actual and nominal)

2014-02-19  Daniele Pezzini <hyouko@gmail.com>

	* docs/Makefile.am, docs/chunked.xsl, docs/common.xsl,
	  docs/xhtml.xsl: docs: prevent smartphones from being too smart
	  (docbook)  Add HTML <meta> tag to not auto-create telephone number
	  links on mobile browsers also in docbook processed documents.
	  Reference: https://github.com/networkupstools/nut/issues/78  XSL
	  files source: -
	  https://github.com/asciidoc/asciidoc/blob/master/docbook-
	  xsl/common.xsl -
	  https://github.com/asciidoc/asciidoc/blob/master/docbook-
	  xsl/xhtml.xsl -
	  https://github.com/asciidoc/asciidoc/blob/master/docbook-
	  xsl/chunked.xsl
	* docs/man/asciidoc.conf: docs: prevent smartphones from being too
	  smart  Add HTML <meta> tag to not auto-create telephone number
	  links on mobile browsers.  Reference:
	  https://github.com/networkupstools/nut/issues/78

2014-02-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt: Update NUT team membership for Daniele
	  Pezzini  Daniele Pezzini is a now a NUT senior developer

2014-02-14  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt, docs/website/news.txt: Formalizing the
	  end of the relationship with Eaton  The situation of the
	  relationship with Eaton has evolved, and since 2011 Eaton does not
	  support NUT anymore. This may still evolve in the future. But for
	  now, please do not consider anymore that buying Eaton products will
	  provide you with official support from Eaton, or a better level of
	  device support in NUT.

2014-02-14  Charles Lepple <clepple+nut@gmail.com>

	* Makefile.am: devd: use staging directory for distcheck
	* drivers/Makefile.am, drivers/snmp-ups.c, drivers/xppc-mib.c,
	  drivers/xppc-mib.h: snmp-ups: add XPPC-MIB for Tripp Lite
	  SU10KRT3/1X
	* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh:
	  documentation updates

2014-02-10  Charles Lepple <clepple+nut@gmail.com>

	* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh: fix
	  option typos  * Use '-M' for MIB directories, to match snmpwalk and
	  the help text. * Add space before '-c' in snmpwalk (not sure how
	  this worked before)
	* scripts/Makefile.am: cosmetic: Indent scripts/Makefile.am
	  EXTRA_DIST continuation lines
	* scripts/Makefile.am: Add gen-snmp-subdriver.sh to distribution
	  tarball

2014-02-14  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt: Update NUT team membership for Frédéric
	  Bohe  Frederic Bohe, NUT senior developer and Eaton contractor from
	  2009 to 2013, is now a retired member. Thanks for all the hard work
	  on the Windows port, nut-scanner, Unix packaging, support, ... Also
	  update the developers membership page, from Alioth to GitHub

2013-02-24  Charles Lepple <clepple+nut@gmail.com>

	* autogen.sh, configure.ac, scripts/Makefile.am,
	  scripts/devd/.gitignore, scripts/devd/Makefile.am,
	  scripts/devd/README, tools/nut-usbinfo.pl: FreeBSD: generate
	  devd.conf files for USB UPSes  This adds a --with-devd-dir=PATH
	  option to ./configure, which defaults to /usr/local/etc/devd (or
	  /etc/devd, whichever is found first).  Unlike udev, there does not
	  seem to be a way to re-trigger rules at runtime. This means you
	  will likely need to unplug and replug your UPS after installing the
	  new nut-usb.conf file.

2014-02-13  Arnaud Quette <arnaud.quette@free.fr>

	* .gitignore, server/.gitignore: Minor completion to gitignore files
	  Add a few more exotic targets, related to debug or official
	  distribution

2014-02-11  Daniele Pezzini <hyouko@gmail.com>

	* .gitignore, clients/.gitignore, common/.gitignore, conf/.gitignore,
	  data/.gitignore, data/html/.gitignore, docs/.gitignore,
	  docs/man/.gitignore, docs/website/.gitignore,
	  docs/website/scripts/.gitignore, drivers/.gitignore,
	  include/.gitignore, lib/.gitignore, m4/.gitignore,
	  scripts/.gitignore, scripts/HP-UX/.gitignore,
	  scripts/Solaris/.gitignore, scripts/augeas/.gitignore,
	  scripts/avahi/.gitignore, scripts/hal/.gitignore,
	  scripts/hotplug/.gitignore, scripts/python/.gitignore,
	  scripts/systemd/.gitignore, scripts/udev/.gitignore,
	  scripts/ufw/.gitignore, server/.gitignore, tests/.gitignore,
	  tools/.gitignore, tools/nut-scanner/.gitignore: Simplify gitignore
	  files  Remove redundancies and old/svn things. Limit the scope
	  wherever it makes sense. Ignore all cscope files and test logs.
	  Make ignoring generated files easier to maintain.

2014-02-11  Charles Lepple <clepple+nut@gmail.com>

	* drivers/libshut.c: libshut: partially revert PnP/RTS change
	  Reported by Baruch Even. It is unclear how this will work after
	  running nut-scanner, but it is more important to keep the drivers
	  working.  Reference: 65db105 /
	  2013-09-24T08:18:00Z!fredericbohe@eaton.com  Closes:
	  networkupstools/nut#91

2014-02-09  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: update manpage for the newly
	  supported Voltronic Power P98 units
	* drivers/nutdrv_qx.c, drivers/nutdrv_qx_mecer.c,
	  drivers/nutdrv_qx_mecer.h: nutdrv_qx: improve support for
	  '(ACK/(NAK' and Voltronic Power P98 UPSes  In 'mecer' subdriver's
	  claim function try to get protocol (QPI, for Voltronic Power
	  devices) used by the UPS: - supported devices are Voltronic Power's
	  P98 units - if the UPS doesn't support the QPI command, use its
	  reply to identify whether it uses '(ACK\r'/'(NAK\r' replies  This
	  way we can catch '(ACK/(NAK' devices, while previously the 'mecer'
	  subdriver was 'hidden' by the 'megatec' (echo back/'ACK/NAK') one.
	  Plus Q1 units with 'ACK'/'NAK' replies or echoing back not
	  supported and rejected commands are no longer wrongly 'claimed' by
	  the 'mecer' subdriver.

2014-02-03  Daniele Pezzini <hyouko@gmail.com>

	* docs/.gitignore, docs/Makefile.am, docs/documentation.txt: docs:
	  build PDF also for cables.txt

2014-02-02  Daniele Pezzini <hyouko@gmail.com>

	* Makefile.am, configure.ac, docs/.gitignore, docs/Makefile.am,
	  docs/man/.gitignore, docs/man/Makefile.am, docs/stable-hcl.txt,
	  docs/user-manual.txt, docs/website/.gitignore,
	  docs/website/Makefile.am, docs/website/css/ie-overrides.css,
	  docs/website/css/web-layout.css,
	  docs/website/css/xhtml11-quirks.css, docs/website/css/xhtml11.css,
	  docs/website/faviconut.ico, docs/website/faviconut.png,
	  docs/website/news.txt, docs/website/old-news.txt,
	  docs/website/projects.txt, docs/website/scripts/.gitignore,
	  docs/website/scripts/filter_png.js, docs/website/scripts/jquery.js,
	  docs/website/scripts/nut_jquery.js, docs/website/scripts/toc.js,
	  docs/website/ups-protocols.txt, docs/website/web-layout.conf,
	  docs/website/website.txt, tools/Makefile.am, tools/nut-hclinfo.py:
	  website: move to a standalone website

2014-01-18  Daniele Pezzini <hyouko@gmail.com>

	* docs/net-protocol.txt: docs: fix a couple of asciidoc errors in
	  net-protocols.txt
	* server/netlist.c: net-protocol: fix closing line of LIST RANGE

2014-01-16  Charles Lepple <clepple+nut@gmail.com>

	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: fix permissions-based
	  crash, and enable vendor variable (1.1)

2014-01-13  Charles Lepple <clepple+nut@gmail.com>

	* .gitignore: Ignore cscope.out
	* docs/man/.gitignore, docs/man/nutdrv_atcl_usb.txt,
	  drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: documentation and
	  logging (v1.0)

2014-01-11  Charles Lepple <clepple+nut@gmail.com>

	* drivers/apc-mib.c: snmp-ups: APC SmartBoost and SmartTrim are OL
	  SmartBoost and SmartTrim are voltage regulation functions that
	  prevent the UPS from using the battery during brownouts and
	  overvoltages, so the BOOST and TRIM states are also mapped to OL.
	  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6583
	* data/driver.list.in: [HCL] MicroDowell B.Box LP 500: genericups
	  type 7  Closes networkupstools/nut#83  From @lxp:  UPS shutdown
	  only works when on-battery and has a delay of about 1min until
	  execution (something between 50sec to 1min 30sec on mine).
	  References: http://www.ezdirect.it/pdf/lp500.pdf
	  https://forums.gentoo.org/viewtopic-t-730172-start-0.html

2014-01-11  Daniele Pezzini <hyouko@gmail.com>

	* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: fix man page
	  references

2014-01-11  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/nutdrv_atcl_usb.txt, drivers/nutdrv_atcl_usb.c:
	  nutdrv_atcl: match iManufacturer (vendor) string
	* docs/man/snmp-ups.txt: snmp-ups: update and edit documentation

2014-01-11  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in: HCL: add Atlantis Land/Voltronic Power units
	  supported by nutdrv_qx
	* drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
	  common.h: nutdrv_qx: fix nutdrv_qx_blazer-common.{c,h} header
	  comments
	* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
	  update manuals for new 'voltronic-qs' subdriver

2013-12-05  Daniele Pezzini <hyouko@gmail.com>

	* drivers/Makefile.am, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic-qs.h:
	  nutdrv_qx: add Voltronic-QS subdriver (nutdrv_qx
	  protocol=voltronic-qs)  A subdriver using a protocol, specific to
	  UPSes manufactured by Voltronic Power, based on the 'mustek' one
	  (i.e. 'QS').

2014-01-01  Charles Lepple <clepple+nut@gmail.com>

	* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: adjusted logging and
	  retries (v0.02)
	* data/driver.list.in, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/nutdrv_atcl_usb.txt: nutdrv_atcl_usb: man page and HCL
	  entries

2013-12-31  Charles Lepple <clepple+nut@gmail.com>

	* drivers/.gitignore, drivers/Makefile.am, drivers/nutdrv_atcl_usb.c,
	  tools/nut-usbinfo.pl: nutdrv_atcl_usb: 'ATCL FOR UPS' new driver
	  Reference: http://news.gmane.org/find-
	  root.php?message_id=%3c52B4C54E.1050106%40ariwainer.com.ar%3e
	* drivers/libusb.c, drivers/usb-common.h: Move USB_TIMEOUT to usb-
	  common.h

2013-12-31  Laurent Bigonville <bigon@bigon.be>

	* .gitignore, INSTALL => INSTALL.nut, Makefile.am, docs/FAQ.txt,
	  docs/Makefile.am, docs/configure.txt, docs/packager-guide.txt,
	  docs/user-manual.txt: Rename INSTALL to INSTALL.nut  Rename it to
	  INSTALL.nut so autoreconf will not try to overwrite it.  In Debian
	  tools like dh_autoreconf calls autoreconf with -f which overwrite
	  the INSTALL file.

2013-12-27  Charles Lepple <clepple+nut@gmail.com>

	* scripts/subdriver/gen-usbhid-subdriver.sh: usbhid-ups: fix call to
	  is_usb_device_supported()  The is_usb_device_supported() function
	  now takes a USBDevice_t* instead of a pair of USB ID values.

2013-12-22  Florian Bruhin <nut@the-compiler.org>

	* data/driver.list.in, docs/man/powercom.txt, drivers/powercom.c: Add
	  OptiUPS VS 575C support to PowerCom  Reference:
	  http://news.gmane.org/find-
	  root.php?message_id=%3c20131126085646.GM28832%40lupin%3e

2013-12-11  Denis Yantarev <denis.yantarev@gmail.com>

	* drivers/blazer_usb.c, drivers/nutdrv_qx.c: Fixed incorrectly
	  reported Ippon response length

2013-11-30  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx.c,
	  drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
	  common.h, drivers/nutdrv_qx_megatec-old.c,
	  drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_q1.c: nutdrv_qx: fix
	  'megatec/old' and 'mustek' subdrivers' claim functions  Address,
	  for 'megatec/old' and 'mustek' subdrivers, the same problem fixed
	  in commit 720975f4de910b270ba705a7f2981c2ee33ca2eb for Q1-based
	  ones: - Make the claim function of 'megatec/old' and 'mustek'
	  subdrivers not poll the UPS for 'vendor' informations as they are
	  not really needed to set these protocols apart from the other ones
	  (i.e. the 'status' poll is specific enough, at the time of
	  writing). - Move common 'light' claim function to nutdrv_qx_blazer-
	  common.{c,h}. - Update manual. - Versioning.

2013-11-24  Daniele Pezzini <hyouko@gmail.com>

	* docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: improve developer manual
	  Get rid of useless tables. Fix minor errors/typos.
	* drivers/nutdrv_qx.c: nutdrv_qx: versioning
	* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
	  update manuals for new Q1 subdriver and improve readability

2013-11-23  Daniele Pezzini <hyouko@gmail.com>

	* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers/nutdrv_qx_q1.c,
	  drivers/nutdrv_qx_q1.h: nutdrv_qx: add new 'fallback' Q1 subdriver
	  Add new 'Q1' subdriver. This subdriver implements the same protocol
	  as the one used by the 'megatec' subdriver minus the vendor (I) and
	  ratings (F) queries. In the claim function: - it doesn't even try
	  to get 'vendor' informations (I) - it checks only status (Q1),
	  through 'input.voltage' variable Therefore it should be able to
	  work even if the UPS doesn't support vendor/ratings *and* the user
	  doesn't use the 'novendor'/'norating' flags, as long as: - the UPS
	  replies a Q1-compliant answer (i.e. not necessary filled with all
	  of the Q1-required data, but at least of the right length and with
	  not available data filled with some replacement character) - the
	  UPS reports a valid input.voltage (used in the claim function) -
	  the UPS reports valid status bits (1st, 2nd, 3rd, 6th, 7th are the
	  mandatory ones)  This commit reintroduces a functionality of the
	  blazer subdrivers that was lost because now, in order to tell
	  whether a device is supported by a subdriver or not, if the user
	  doesn't call the driver with the 'novendor' flag, both the status
	  (Q1) and the vendor (I/FW?) queries are needed (that's to better
	  discern the subdrivers).  Reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2013-November/008692.html

2013-11-23  Charles Lepple <clepple+nut@gmail.com>

	* configure.in => configure.ac: Rename configure.in to configure.ac
	  autoconf has been warning about this for a while - let's fix it
	  before too many branches get created with the old name.
	* configure.in: configure.in: bump version to 2.7.1.5  Some packaging
	  systems don't like the -pre# system.

2013-11-21  Laurent Bigonville <bigon@bigon.be>

	* docs/man/ups.conf.txt, docs/man/upsdrvctl.txt, drivers/upsdrvctl.c:
	  Provide retry options for upsdrvctl and driver(s)  As recently seen
	  in Debian (bugs #694717 and #677143), it may be required to have
	  upsdrvctl retrying to start the driver in case of failure.  More
	  specifically, a mix of init system (V and systemd), udev and USB
	  device(s) can result in the /dev entry not being available at
	  driver startup, thus resulting in a general failure to start NUT.
	  This commit provides at least a way to overcome this issue. A more
	  suitable  solution will require more work on NUT design.  This
	  patch if based on Arnaud Quette proposal

2013-11-20  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am: Maintainers targets: distribution signature / hashes
	  Create some handy targets to ease and automate release publication

2013-11-19  Charles Lepple <clepple+nut@gmail.com>

	* configure.in: configure: update version to 2.7.1
	* docs/website/news.txt: news: add 2.7.1 release
	* Makefile.am: ChangeLog: use full path to generator script
	* docs/website/projects.txt: website: update related project links

2013-11-18  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS: Minor reordering of the news

2013-11-18  Kirill Smelkov <kirr@mns.spb.ru>

	* MAINTAINERS, docs/man/.gitignore, docs/man/Makefile.am,
	  docs/man/al175.txt, docs/man/index.txt, docs/man/nutupsdrv.txt,
	  docs/new-drivers.txt, drivers/Makefile.am, drivers/al175.c: al175:
	  updated driver, please restore it  Back in 2005 I was young and
	  idealistic, that's why you finally marked al175 as 'broken', but
	  now I understand your points (some) and that in NUT you need good
	  portability.  So this time I've checked that al175 compiles with
	  CC="gcc -std=c89 -pedantic", and CC="gcc -std=c99 -pedantic"  Also,
	  I've tried to clean-up the driver based on feedback from 2009, but
	  unfortunately I no longer have hardware to test and will not have
	  any in foreseable future, so the driver was reworked to meet the
	  project code quality criteria, without testing on real hardware.
	  Some bugs may have crept in.  Changes since last posting in 2009:
	  - patch rebased on top of current master (v2.6.5-400-g214c442); -
	  added reference to COMLI communication protocol document; - status
	  decode errors go to log, instead of setting non-conformant status
	  like "?T", "?OOST", etc.  For such errors new loglevel is
	  allocated; - "High Battery" status is back; - converted tracing
	  macros to direct use of upsdebugx and numbers 1,2,3,4 for loglevels
	  as requested (but now lines got longer because of explicit __func__
	  usage); - lowered usage of other macros (e.g. REVERSE_BITS
	  inlined); - alarm(3) is not used anymore - instead whole I/O
	  transaction time budget is maintained manually; - man page
	  converted to asciidoc and supported variables list is merged into
	  it;  - upsdebug_ascii moved to common.c and to separate patch.
	  ~~~~  Changes since al175 was removed from NUT tree in 2008:  -
	  alloca was eliminated through the help of automatic variables -
	  debugging/tracing were reworked to (almost always) use NUT builtins
	  - al175 now uses 3 debug levels for (1=user-level info, 2=protocol
	  debugging, 3=I/O tracing)  - rechecked
	  http://eu1.networkupstools.org/doc/2.2.0/developers.html and
	  applied where apporpiate  Also  > This driver does not support
	  upsdrv_shutdown(), which makes > it not very useful in a real world
	  application. This alone > warrants 'experimental' status, but for
	  the below mentioned > reasons (to name a few), it's flagged
	  'broken' instead.  Yes, at present shutdown is not supported, and
	  unfortunately now I don't have AL175 hardware at hand, so that I
	  can't write it and verify the implementation.  I've marked the
	  driver as DRV_EXPERIMENTAL, although it was tested by us as part of
	  our systems to work OK for more than three years in production
	  environment on ships (and we don't need shutdown there -- in
	  critical situations the system has to operate as long as possible,
	  untill the battery is empty)  Also, all of the previous issues
	  listed below are now fixed in this al175 version:  - ‘return’ with
	  a value, in function returning void (2x) - anonymous variadic
	  macros were introduced in C99 - C++ style comments are not allowed
	  in ISO C90 - ISO C forbids braced-groups within expressions (5x) -
	  ISO C90 forbids specifying subobject to initialize (16x) - ISO C99
	  requires rest arguments to be used (18x)  Yes, "All the world is
	  not an x86 Linux box," and I've tried to make all the world happy.
	  Please apply.  Thanks, Kirill.
	* common/common.c, docs/developers.txt, include/common.h: common:
	  upsdebug_ascii() - to dump a message in ascii  For debugging ASCII-
	  based protocols with control characters (e.g. COMLI) it is handy to
	  dump messages not in hex, but in ascii with human readable codes.
	  Add utility function to do it.

2013-11-17  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/.gitignore, drivers/.gitignore: apcupsd-ups: ignore
	  generated files
	* drivers/apcupsd-ups.c: apcupsd-ups: fix cut-n-paste error
	* drivers/apcupsd-ups.c: apcupsd-ups 0.04: use O_NONBLOCK instead of
	  FIONBIO
	* NEWS, docs/man/index.txt: apcupsd-ups: add NEWS and man page link
	* UPGRADING: Mention upsrw output change.
	* docs/man/nut-recorder.txt: Reword nut-recorder man page
	* UPGRADING: UPGRADING: link to man pages for changed drivers
	* configure.in: Bump version to 2.7.1-pre2
	* NEWS, UPGRADING: Update NEWS and UPGRADING for 2.7.1  Closes:
	  networkupstools#37
	* data/driver.list.in: HCL: StarPower PCF-800VA  Reported by Don.
	  Reference: http://news.gmane.org/find-root.php?message_id=%3cCAPO%2
	  bLDnApF3ALNfp%5fwaVpHqSuJ9sajKCKXPXLLsAWUWww7Of%3dw%40mail.gmail.co
	  m%3e
	* data/driver.list.in: HCL: Atlantis Land A03-P551(V1.2) supported by
	  blazer_usb  Reported by Giovanni Panozzo.  Reference:
	  http://news.gmane.org/find-
	  root.php?message_id=%3c51B76B0C.1080109%40panozzo.it%3e  Note that
	  blazer_usb will eventually be replaced by nutdrv_qx.
	* clients/nutclient.h, clients/upsclient.c,
	  conf/upsmon.conf.sample.in, configure.in, docs/FAQ.txt,
	  docs/man/libnutclient.txt, docs/man/libnutclient_general.txt,
	  docs/man/upsmon.conf.txt, docs/security.txt, drivers/powerman-
	  pdu.c, server/netssl.c: Replace 'connexion' with 'connection' in
	  English contexts  Also reworded a few phrases surrounding the
	  replacements.
	* docs/man/.gitignore: asciidoc: ignore all generated blazer*.html
	  files
	* data/driver.list.in: HCL: update CyberPower entries, including
	  CP900AVR  Reported by Craig Duttweiler  Reference:
	  http://news.gmane.org/find-
	  root.php?message_id=%3c51295F86.4080601%40twistedsanity.net%3e
	* docs/stable-hcl.txt: GitHub issues can also be used to report HCL
	  updates
	* docs/website/projects.txt: Update links to related projects
	* docs/download.txt: Update download page  * Re-added link to
	  Buildbot snapshot generator * Updated a few links

2013-11-13  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/.gitignore, drivers/.gitignore: Add nutdrv_qx to
	  .gitignore files and remove voltronic from them

2013-11-12  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/Makefile.am: a2x: use --destination-dir  This option seems
	  to work now. Previously, Asciidoc source files were copied to the
	  destination directory, but this did not account for included files.

2013-11-12  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/nutdrv_qx.txt: nutdrv_qx: fix cross links in manpage
	  Remove links to voltronic manuals. Fix links to blazer manuals.

2013-11-12  Charles Lepple <clepple+nut@gmail.com>

	* .gitignore: git: ignore test-driver, and sort ignores list  test-
	  driver is apparently part of automake, generated for libcpp unit
	  tests.

2013-11-10  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/Makefile.am: Include blazer-common.txt in built tarball

2013-11-10  Daniele Pezzini <hyouko@gmail.com>

	* clients/upsrw.c: upsrw: publish also the maximum length of STRING
	  rw variables

2013-11-09  Daniele Pezzini <hyouko@gmail.com>

	* docs/website/scripts/nut_jquery.js: HCL: Improve readability of
	  nut_jquery.js
	* docs/website/scripts/nut_jquery.js: HCL: make support-level filter
	  show items with a 'higher or equal' level  Reference: https://githu
	  b.com/networkupstools/nut/issues/48#issuecomment-28134135
	* data/driver.list.in: nutdrv_qx: readd HCL's items lost with the
	  revert of the voltronic merge
	* data/driver.list.in: nutdrv_qx: remove superfluous indications from
	  the HCL
	* data/driver.list.in, docs/Makefile.am, docs/man/Makefile.am,
	  docs/man/index.txt, docs/man/{blzr.txt => nutdrv_qx.txt},
	  docs/man/nutupsdrv.txt, docs/new-drivers.txt, ...lzr-subdrivers.txt
	  => nutdrv_qx-subdrivers.txt}, drivers/Makefile.am, drivers/{blzr.c
	  => nutdrv_qx.c}, drivers/{blzr.h => nutdrv_qx.h}, ...r_blazer-
	  common.c => nutdrv_qx_blazer-common.c}, ...r_blazer-common.h =>
	  nutdrv_qx_blazer-common.h}, drivers/{blzr_mecer.c =>
	  nutdrv_qx_mecer.c}, drivers/{blzr_mecer.h => nutdrv_qx_mecer.h},
	  ...{blzr_megatec-old.c => nutdrv_qx_megatec-old.c},
	  ...{blzr_megatec-old.h => nutdrv_qx_megatec-old.h},
	  drivers/{blzr_megatec.c => nutdrv_qx_megatec.c},
	  drivers/{blzr_megatec.h => nutdrv_qx_megatec.h},
	  drivers/{blzr_mustek.c => nutdrv_qx_mustek.c},
	  drivers/{blzr_mustek.h => nutdrv_qx_mustek.h},
	  .../{blzr_voltronic.c => nutdrv_qx_voltronic.c},
	  .../{blzr_voltronic.h => nutdrv_qx_voltronic.h},
	  drivers/{blzr_zinto.c => nutdrv_qx_zinto.c}, drivers/{blzr_zinto.h
	  => nutdrv_qx_zinto.h}, tools/nut-usbinfo.pl: nutdrv_qx: rename
	  'blzr' driver to 'nutdrv_qx'  Reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2013-November/006555.html
	* docs/stable-hcl.txt, docs/website/css/web-layout.css: Address Issue
	  #48 (text-based browsers)  Reference: https://github.com/networkups
	  tools/nut/issues/48#issuecomment-28107101

2013-11-08  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/projects.txt: Cleanup NUT related projects

2013-10-25  Daniele Pezzini <hyouko@gmail.com>

	* drivers/blazer.c: blazer: Support UPSes that reply '(ACK' when an
	  instant command succeeds
	* drivers/blazer.c: blazer: Fix a discrepancy in the handling of
	  instant commands  Check if the reply we got back from the UPS is
	  'ACK' also for the commands stored in the array.

2013-10-17  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/blazer-common.txt: blazer: Cosmetic changes
	* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: Fix
	  blazer_{ser,usb} + TESTING  Those things are useless when TESTING
	  is defined
	* docs/man/blazer-common.txt: blazer: Fix user manuals
	  {Serial,USB}-specific sections belong to 'Extra arguments' section
	* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: Versioning
	* drivers/blazer.c: blazer: Add more log infos in instcmd

2013-10-16  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/Makefile.am, docs/man/{blazer.txt => blazer-common.txt},
	  docs/man/blazer_ser.txt, docs/man/blazer_usb.txt,
	  docs/man/index.txt, docs/man/nutupsdrv.txt: blazer: Fix {usb,ser}
	  manual  Split the old blazer manual in two manuals named after
	  their executables with a common source.
	* docs/man/blazer.txt: blazer: Fix user manual  Fix minor errors Add
	  ranges Fix test.battery.start (i.e. minutes instead of seconds)
	* drivers/blazer.c: blazer: Fix shutdown sequence  Split stop pending
	  shutdown and shutdown itself so that if we have problems stopping
	  the shutdown (e.g. there's no shutdown pending and the UPS, because
	  of that, echoes back the command) we can still shutdown the UPS.
	* drivers/blazer.c: blazer: Fix minor error in battery guesstimation
	  We need both battery.voltage.low and battery.voltage.high to
	  'guesstimate' the battery charge
	* drivers/blazer.c: blazer: Fix test.battery.start  T00 doesn't make
	  any sense: the range should be 01-99 minutes
	* drivers/blazer.c: blazer: Fix shutdown.return  'SnR0000' is meant
	  to put the UPS down and not return 'Sn' should be used instead when
	  ondelay is 0
	* drivers/blazer.c: blazer: Fix shutdown delay  'offdelay' as used by
	  this driver is meant to be in the .2-.9 (12..54 seconds) and 01-10
	  (60..600 seconds) range.

2013-11-03  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in, docs/man/.gitignore, docs/man/Makefile.am,
	  docs/man/index.txt, docs/man/voltronic_ser.txt,
	  docs/man/voltronic_usb.txt, drivers/Makefile.am,
	  drivers/voltronic.c, drivers/voltronic.h, drivers/voltronic_ser.c,
	  drivers/voltronic_usb.c, tools/nut-usbinfo.pl: Revert "Merge branch
	  'voltronic-driver'"  This reverts commit
	  de07fc7f5e7f68b91507b2bf3d4d3b92b774c3ed, reversing changes made to
	  a074844f88ca352780dd881b5fa3c435832d165e.  The voltronic
	  funtionality will be a subdriver of the new blazer driver.

2013-11-04  Daniele Pezzini <hyouko@gmail.com>

	* drivers/blzr_voltronic.c: blzr: Fix log message
	* drivers/blzr_voltronic.c: blzr: Fix compile-time error  Reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2013-November/006549.html

2013-10-25  Daniele Pezzini <hyouko@gmail.com>

	* drivers/blzr.c: blzr: Cosmetic changes
	* drivers/blzr_megatec-old.c, drivers/blzr_megatec.c,
	  drivers/blzr_mustek.c, drivers/blzr_zinto.c: blzr: Remove
	  duplicates in the testing struct

2013-11-04  Daniele Pezzini <hyouko@gmail.com>

	* drivers/blzr_blazer-common.c, drivers/blzr_blazer-common.h: blzr:
	  Fix blzr_blazer-common.{c,h} header comments

2013-10-25  Daniele Pezzini <hyouko@gmail.com>

	* docs/blzr-subdrivers.txt, docs/man/blzr.txt, drivers/Makefile.am,
	  drivers/blzr.c, drivers/blzr_mecer.c, drivers/blzr_mecer.h: blzr:
	  Add Mecer subdiver (blzr protocol=mecer)  A subdriver covering an
	  idiom similar to the one used by the megatec subdriver, but with
	  these peculiarities: - if a command/query is rejected or invalid,
	  the UPS will reply '(NAK\r' - if a command succeeds, the UPS will
	  reply '(ACK\r'

2013-10-17  Daniele Pezzini <hyouko@gmail.com>

	* docs/blzr-subdrivers.txt: blzr: Improve developer manual  Add note
	  on how to group items in blzr2nut array.
	* drivers/blzr_voltronic.c: blzr: Fix switch/case  Forgot to break at
	  the end of the case
	* docs/man/blzr.txt, drivers/blzr.c, drivers/blzr_voltronic.c: blzr:
	  Cosmetic changes

2013-10-16  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in, docs/Makefile.am, docs/blzr-subdrivers.txt,
	  docs/man/Makefile.am, docs/man/blzr.txt, docs/man/index.txt,
	  docs/man/nutupsdrv.txt, docs/new-drivers.txt, drivers/Makefile.am,
	  drivers/blzr.c, drivers/blzr.h, drivers/blzr_blazer-common.c,
	  drivers/blzr_blazer-common.h, drivers/blzr_megatec-old.c,
	  drivers/blzr_megatec-old.h, drivers/blzr_megatec.c,
	  drivers/blzr_megatec.h, drivers/blzr_mustek.c,
	  drivers/blzr_mustek.h, drivers/blzr_voltronic.c,
	  drivers/blzr_voltronic.h, drivers/blzr_zinto.c,
	  drivers/blzr_zinto.h, drivers/dstate-hal.c, drivers/dstate-hal.h,
	  tools/nut-usbinfo.pl: blzr: New driver 'blzr'  New driver for Q*
	  UPSes. Based on blazer, usbhid-ups and voltronic driver.  This
	  might address Issue #25

2013-11-04  Charles Lepple <clepple+nut@gmail.com>

	* include/Makefile.am: nut_include.h: fail gracefully if git fails
	  Fix proposed by Jim Klimov.

2013-11-03  Charles Lepple <clepple+nut@gmail.com>

	* docs/stable-hcl.txt: HCL: typos
	* data/driver.list.in, docs/stable-hcl.txt: HCL: minor cleanup
	  Remove a duplicate Tripp Lite entry, and add a missing "a".
	* docs/stable-hcl.txt: HCL documentation: reword
	* data/driver.list.in, docs/acknowledgements.txt: HCL: incorporate
	  Tripp Lite test results  Source:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/8173
	* docs/Makefile.am, docs/website/Makefile.am: HCL: additional
	  dependencies  Apparently still not complete, though.
	* docs/website/scripts/nut_jquery.js: HCL JavaScript: make key case-
	  insensitive  Also special-case the spelling change for Tripp Lite.
	  TODO: make the value matching case-insensitive as well.
	* docs/website/scripts/nut_jquery.js: HCL JavaScript: update the USB-
	  matching code  Slightly more accurate, but later on we should
	  really track the connection type as a first-class attribute for
	  each entry in the HCL. Matching the driver name is brittle.
	* docs/website/scripts/nut_jquery.js, tools/nut-hclinfo.py: HCL
	  generation: don't combine driver names  The Python and JavaScript
	  code for generating the HCL was combining adjacent drivers even
	  when the support level was different. This clutters up the driver
	  list a bit, but presents a more accurate picture of support levels.

2013-10-28  Michal Soltys <soltys@ziu.info>

	* docs/man/apcsmart.txt: apcsmart: minor man update  A short note
	  about availabilty of apcsmart-old.
	* docs/man/apcsmart.txt, drivers/apcsmart.c, drivers/apcsmart.h:
	  apcsmart: string/comment/text trivial changes

2013-10-27  Charles Lepple <clepple+nut@gmail.com>

	* tools/nut-scanner/nutscan-device.c: [nut-scanner] Remove unused
	  variable

2013-10-18  Vaclav Krpec <VaclavKrpec@Eaton.com>

	* tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
	  device.h, tools/nut-scanner/nutscan-display.c, tools/nut-
	  scanner/scan_nut.c: Nutscan fix and enhancement  Closes #60 (GitHub
	  Pull Request via fbohe)
	* docs/man/netxml-ups.txt, drivers/mge-xml.c, drivers/mge-xml.h,
	  drivers/netxml-ups.c: netxml: added RW access, fixed FSD/shutdown
	  duration bugs, etc.  * Fixed bugs in resolution of FSD condition
	  and computation of shutdown duration. * Added System.* UPS
	  variables. * Enabled RW access to appropriate UPS variables. *
	  Added UPS veriables value convertors. * Added support for XML
	  protocol v3 {GET|SET}_OBJECT query implementing getvar and setvar
	  routines. * netxml driver man page updated to include info about
	  the driver-specific configuration parameters.  Closes #59 (GitHub
	  pull request: "Enhancement for netxml driver")  Pull request by:
	  Frédéric BOHE <fredericbohe@eaton.com>
	* clients/upsc.c, clients/upscmd.c, clients/upslog.c,
	  clients/upsrw.c: Fix AIX linkage of do_upsconf_args()  Closes #58
	  (GitHub pull request "Fix AIX build")  (cherry picked from commit
	  5fc7518f97d2738d791c3c77f2257d05e3a9da3b)

2013-10-26  Charles Lepple <clepple+nut@gmail.com>

	* configure.in: Define _REENTRANT for all Solaris and AIX platforms.
	  This is essentially the final commit in pull request #39.

2013-10-24  Frédéric BOHE <fredericbohe@eaton.com>

	* drivers/mge-hid.c: Fix wrong OFF status reported when on battery.
	  UPS.BatterySystem.Charger.PresentStatus.Used is not related to UPS
	  outputs being on or off but rather to the charger being on or off.

2013-10-16  Daniele Pezzini <hyouko@gmail.com>

	* scripts/python/Makefile.am, scripts/python/app/gui-1.3.glade,
	  .../app/locale/it/LC_MESSAGES/NUT-Monitor.mo,
	  scripts/python/app/locale/it/it.po, scripts/python/app/nut-
	  monitor.desktop: Add italian translation
	* scripts/python/app/locale/fr/fr.po: Add source of french
	  translation
	* scripts/python/app/gui-1.3.glade.h, scripts/python/app/locale/NUT-
	  Monitor.pot: Add translation sources

2013-10-16  Frédéric BOHE <fredericbohe@eaton.com>

	* drivers/powerware-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h:
	  Fix Low Battery detection with ConnectUPS cards  The low battery
	  OID itself cannot be read directly. Low battery alarms OID appears
	  in an alarm array.

2013-10-02  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: [HCL] Add support for Eaton 5S  Add Eaton 5S
	  (USB ID 0x0463:0xffff) to the list of usbhid-ups supported models
	  (reported by Matt Ivie)

2013-10-02  Frédéric BOHE <fredericbohe@eaton.com>

	* data/driver.list.in: [HCL] update Eaton UPS

2013-09-30  Frédéric BOHE <fredericbohe@eaton.com>

	* drivers/libshut.c: Increment driver revision

2013-09-28  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c: bcmxcp: Fix handling of date and time format  The
	  date and time bytes are packed BCD, so it must be properly decoded.
	  The check for the Julian or Month:Day format was wrong Info on
	  format taken from http://old.networkupstools.org/protocols/eaton/XC
	  P_Rev_C1_Public_021309.pdf
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for some
	  more meters and one more command  Add mapping for
	  PW_SET_TIME_AND_DATE command. Add mapping for input.bypass.voltage,
	  input.bypass.L1-N.voltage, input.bypass.L2-N.voltage,
	  input.bypass.L3-N.voltage. Add mapping for input.bypass.frequency.
	  Add mapping for ups.power.nominal if provided as meter, it was
	  previously only set on init. Change mapping for ups.realpower for
	  single phase. Tested on Eaton PW9130.
	* drivers/bcmxcp.c: bcmxcp: Remove newline on debug output for
	  outlets

2013-09-24  Frédéric BOHE <fredericbohe@eaton.com>

	* drivers/libshut.c, tools/nut-scanner/scan_eaton_serial.c: Change
	  RTS init level for PnP devices  Setting RTS line to 1 disturbs
	  communication with some devices using serial plug and play feature.
	  So we need to initialize it to 0.

2013-09-07  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add support for Forza FX-1500LCD  Add Forza
	  FX-1500LCD (USB ID 0x0665:0x5161) to the list of blazer_usb
	  supported models (reported by Gabor Tjong A Hung)
	* data/driver.list.in: Add Schneider APC AP9630 SNMP management card
	  Add Schneider APC AP9630 SNMP management card to the list of snmp-
	  ups supported models. Note that it requires the option
	  "privProtocol=AES" to work (reported by Tim Rice)
	* drivers/.gitignore: Git ignore drivers/voltronic_{ser,usb}  Add
	  drivers/voltronic_{ser,usb} to the list of Git ignored files

2013-08-28  Charles Lepple <clepple+nut@gmail.com>

	* packaging/RedHat/.gitignore, packaging/debian/.gitignore,
	  packaging/mandriva/.gitignore, packaging/opensuse/.gitignore:
	  Remove .gitignore files from long-gone packaging directory.

2013-08-28  Daniele Pezzini <hyouko@gmail.com>

	* docs/website/css/web-layout.css: Improve CSS readability
	* docs/stable-hcl.txt, docs/website/css/web-layout.css: Address Issue
	  #48  Move legend out of filters' block. (HTML+CSS)

2013-08-10  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c: bcmxcp: Add instcmd for system test capabilities
	  based on what UPS support

2013-08-09  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Code restructure,
	  declare variables at top of method  After re-reading code style,
	  compiled with -pedantic, and got some warnings, so moved variable
	  declarations to the top of methods
	* drivers/bcmxcp.c, drivers/bcmxcp_io.h, drivers/bcmxcp_ser.c,
	  drivers/bcmxcp_usb.c: bcmxcp: Reformat code, remove tabs in the
	  middle of lines. No code changes  After re-reading the developer
	  code style guide, use spaces and not tabs in the middle of lines to
	  align text
	* drivers/bcmxcp.h: bcmxcp: Reformat code, remove tabs in the middle
	  of lines. No code changes  After re-reading the developer code
	  style guide, use spaces and not tabs in the middle of lines to
	  align text
	* drivers/bcmxcp.c: bcmxcp: Refactor code, use if-else if rather than
	  4 if statements

2013-08-08  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c: bcmxcp: Add parameter to nut_find_infoval to
	  control debug output  We do not want debug output if
	  nut_find_infoval does not find a mapped value in all cases. For
	  example, when a command byte is not mapped to a instcmd, we do not
	  want debug output.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Remove
	  PW_UPDATE_POWER_SOURCE_STATUS_COMMAND, it seems very unlikely to be
	  used
	* drivers/bcmxcp.h: bcmxcp: Cosmetic changes constant definitions. No
	  code changes.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Use command map to
	  control which instcmd are supported  Use the command map info
	  retrieved from UPS to list all commands supported by the UPS at
	  debug level 2. Use the info from command map to set up which
	  instcmd the UPS supports.
	* drivers/bcmxcp.c: bcmxcp: Use info_lkp_t structure for mapping
	  topology info  Make code simpler by using the info_lkp_t structure
	  for mapping value from topology block to text presented to user as
	  ups.description
	* drivers/bcmxcp.c: bcmxcp: Cosmetic commentary fixes and remove some
	  empty lines. No code changes
	* drivers/bcmxcp.c: bcmxcp: Output unsupported alarms on debug level
	  3, not level 2  The supported alarms in alarm map is outputted at
	  debug level 2. The unsupported alarms should be outputted at debug
	  level 3, it is not that interesting. Also remove debug outputted
	  empty line after table heading line for meter map and alarm map.
	* drivers/bcmxcp.c: bcmxcp: Refactor code for setting which alarms
	  are supported, to avoid code duplication  Refactor the code which
	  checks the alarm map for supported alarms, by making a new method
	  which checks the alarm bit to see if the alarm is supported.
	* drivers/bcmxcp.c: bcmxcp: Only include ups.serial and device.part
	  if they have a value  Only set info about ups.serial and
	  device.part if the UPS actually report useful info for these.
	  Remove the handling of space characters as meaning string
	  termination for ups.serial, this is not done for part number, and
	  according to bcmxcp spec are these both 16 byte ascii text
	  messages. Move Nominal output frequence handling up, placing it
	  just below Nominal output voltage

2013-08-04  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/index.txt, docs/man/voltronic_ser.txt,
	  docs/man/voltronic_usb.txt: voltronic* documentation updates  - Add
	  to man page index - Reword a few sections - Fix typos - Comment out
	  USB section in voltronic_ser.txt  Long-term, we should probably
	  figure out a better way to maintain two parallel driver pages like
	  this. The blazer man page is the same for both, with .so links for
	  the man pages, but then you have USB info in a serial driver page.
	  For now, voltronic_usb.txt is just a copy of voltronic_ser.txt with
	  a few _ser-to-_usb replacements.

2013-08-01  Daniele Pezzini <hyouko@gmail.com>

	* drivers/voltronic.c: Get rid of 'god.knows' variables

2013-07-26  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powercom-hid.c: Forgotten subdriver version bump

2013-07-25  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/upsc.txt, docs/man/upscmd.txt, docs/man/upsrw.txt:
	  Complete upsclient commands usage note  Add a note for scripting
	  usage, for upsc, upscmd and upsrw, to state the obvious: only
	  consider the output from stdout for data requested. stderr may
	  contain error messages, which can disrupt your script execution.
	  Address the second task and closes Github issue #30
	* clients/upsclient.c: Fix a minor regression in upsclient output
	  NSS support has introduced a minor regression in upsclient output.
	  Clients such as upsc, upscmd and upsrw were particularly affected.
	  This patch restores a default behavior similar to prior versions.
	  However, "-v" option remains to be implemented.  Address the first
	  task of Github issue #30

2013-07-24  Charles Lepple <clepple+nut@gmail.com>

	* docs/website/web-layout.conf: Add GitHub link to website sidebar

2013-07-24  Frédéric BOHE <fredericbohe@eaton.com>

	* configure.in: Fix wrong errno reported by connect on Solaris
	  Closes issue #43
	* clients/upsclient.c: Fix connect in multi-threaded environnement on
	  AIX  Closes issue #42

2013-07-23  Frédéric BOHE <fredericbohe@eaton.com>

	* clients/upsclient.c: Fix nut-scanner crash on nut server scan,
	  upscli_sslinit calls upscli_readline which might calls
	  upscli_disconnect in case of error. upscli_disconnect frees
	  ups->host and set it to NULL, so it is illegal to use ups->host
	  after a call to upscli_sslinit.

2013-07-23  Charles Lepple <clepple+nut@gmail.com>

	* clients/Makefile.am: Revert "Fix connect in multi-thread
	  environnement on Solaris"  This reverts the previous commit. It
	  overwrites the CFLAGS which specifies one of the key include
	  directories.

2013-07-23  Frédéric BOHE <fredericbohe@eaton.com>

	* clients/Makefile.am: Fix connect in multi-thread environnement on
	  Solaris
	* tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
	  device.h, tools/nut-scanner/scan_avahi.c, tools/nut-
	  scanner/scan_eaton_serial.c, tools/nut-scanner/scan_ipmi.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  [nut-scanner] Make sure to return the first device of the list.

2013-07-22  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: Download information: reference Git
	* configure.in: Bump NUT version to 2.7.1-pre1

2013-07-21  Charles Lepple <clepple+nut@gmail.com>

	* include/Makefile.am: nut_version.h: trim tag characters through
	  first slash

2013-04-27  Charles Lepple <clepple+nut@gmail.com>

	* include/Makefile.am: nut_version.h: remove SVN plumbing  This
	  should eliminate the "Unversioned directory" message. The source of
	  the version information is also listed in nut_version.h  Closes
	  Github issue #15

2013-07-16  Sven Putteneers <sven.putteneers@gmail.com>

	* scripts/python/app/NUT-Monitor: NUT-Monitor: parse battery.runtime
	  as float  Without this patch, I get a flood of "Invalid literal for
	  int with base 10: '28500.00" errors.  http://news.gmane.org/find-
	  root.php?message_id=%3c51E54B99.9030908%40gmail.com%3e

2013-07-10  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/news.txt, docs/website/projects.txt: Reference walNUT
	  Gnome Shell extension

2013-07-09  Charles Lepple <clepple+nut@gmail.com>

	* drivers/riello_ser.c, drivers/riello_usb.c: riello: suppress some
	  warnings about %lu versus %u

2013-07-09  Elio Parisi <E.Parisi@riello-ups.com>

	* drivers/riello.h, drivers/riello_ser.c, drivers/riello_usb.c:
	  riello: whitespace fixes, and read nominal values only once  Bumped
	  driver versions to 0.02

2013-07-07  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add support for reading
	  topology map and setting ups.description based on it
	* drivers/bcmxcp.c: bcmxcp: Initialize variables in
	  calculate_ups_load method
	* drivers/bcmxcp.c: bcmxcp: Output more info hardware capabilities in
	  debug mode  Add some more debug output on driver init, to let us
	  know what the hardware support. Outputs length of alarm history
	  log, topology block length and maximum supported command length.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  input.quality to meters
	* drivers/bcmxcp.c: bcmxcp: Add Alf Høgemark as one of the authors
	  for the driver
	* drivers/bcmxcp.c: bcmxcp: Only calculate ups.load if the UPS does
	  not report it directly  If the UPS does not report a meter mapped
	  to ups.load, we try to calculate the ups.load, but we do not
	  calculate it if the UPS can report the ups.load directly
	* drivers/bcmxcp.c: bcmxcp: Use defined constants in setvar, and
	  handle BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST  Use the defined
	  constants from header file, instead of magic numbers in setvar
	  method. Add handling of BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST.
	  Report upsdrv_comm_good on successful execution of setvar to UPS.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add handling of
	  BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST and others in ACK block
	  Add support for handling more return statuses when exeucting
	  commands, the most important being
	  BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST, which means the command
	  was executed. The others added all handles cases where command was
	  not executed, but you now get a more detailed entry in log as to
	  why it was not executed.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  output.L<phase>.power to meters  Not tested on hardware, due to
	  lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  battery.current.total to meters  Not tested on hardware, due to
	  lack of hardware supporting it

2013-07-06  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  input.realpower to meters  input.realpower is not listed in
	  http://www.networkupstools.org/docs/developer-
	  guide.chunked/apas01.html, but other drivers use it. Not tested on
	  hardware, due to lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  ambient.1.temperature to meters  Not tested on hardware, due to
	  lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  input.power to meters  input.power is not listed in
	  http://www.networkupstools.org/docs/developer-
	  guide.chunked/apas01.html, but other drivers use it. Not tested on
	  hardware, due to lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  output.powerfactor and input.powerfactor to meters
	  input.powerfactor is not listed in
	  http://www.networkupstools.org/docs/developer-
	  guide.chunked/apas01.html, so a bit unsure if this should be added.
	  Not tested on hardware, due to lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
	  output.L<phase>.power.percent to meters  Not tested on hardware,
	  due to lack of hardware supporting it
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: map ups.date and
	  ups.time to meters.  Not testes on hardware, due to lack of
	  hardware supporting it
	* drivers/bcmxcp.h: bcmxcp: Comment which meter map constants are
	  mapped to nut variables

2013-07-05  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add constants for all
	  bcmxmp meter map, and replace magic numbers with constants  Take
	  all the bcmxcp meter map defined in http://old.networkupstools.org/
	  protocols/eaton/XCP_Meter_Map_021309.pdf and put them into the
	  bcmxcp.h file. Update the bcmxcp.c file, replacing magic numbers
	  for meter map by using the corresponding defined constant.

2013-07-04  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c: bcmxcp: Let decode_instcmd_exec also handle short
	  read from UPS
	* drivers/bcmxcp.c: bcmxcp: Add test.panel.start instcmd support
	* drivers/bcmxcp.c: bcmxcp: Use one fuction to decode command
	  execution status in all places  To avoid duplicating the logic
	  which checks the status of command execution at UPS, add a new
	  function which contains the check, and use that function whenever
	  we send a command to UPS and get status back from UPS.
	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Define byte for
	  choosing which system test to run in header file
	* drivers/bcmxcp.c: bcmxcp: Fix outlet number for
	  outlet.x.shutdown.return if more than 2 outlets
	* drivers/bcmxcp.c: bcmxcp: Let upsdrv_shutdown call instcmd for
	  shutting down  To avoid code duplication between upsdrv_shutdown
	  and instcmd, let the upsdrv_shutdown method first try to issue a
	  shutdown.return instcmd, and then proceed with shutdown.stayoff if
	  the shutdown.return failed. This seems to be in line with what the
	  usbhid driver does.
	* drivers/bcmxcp.c: bcmxcp: report upsdrv_comm_good at successful
	  execution of instcmd
	* drivers/bcmxcp.c: bcmxcp: Return more specific error codes from
	  instcmd  Use the available STAT_INSTCMD_FAILED and
	  STAT_INSTCMD_INVALID as return value from the instcmd method when
	  applicable, instead of always returning STAT_INSTCMD_UNKNOWN or -1.

2013-07-03  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: use command map if
	  supplied.  If UPS supplies command map, use it to control what
	  commands we register with dstate_addcmd. If UPS does not supply
	  command map, we register default commands with dstate_addcmd
	* data/cmdvartab, drivers/bcmxcp.c: bcmxcp: cosmetic: make changes by
	  Prachi Gandhi more coherent with rest of driver
	* drivers/bcmxcp.c: bcmxcp: Fix method name outputted in debug
	  message  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6458
	  Whitespace was addressed in previous commit (clepple)

2013-07-03  Charles Lepple <clepple+nut@gmail.com>

	* drivers/bcmxcp.c: bcmxcp: indentation fixes (no code changes)

2013-07-03  Alf Høgemark <alf@i100.no>

	* drivers/bcmxcp.c: bcmxcp: add ups.load and battery.voltage.low
	  Adapted slightly for bcmxcp branch (original patch was against
	  master). Bump driver version to 0.28 as well. (clepple)  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6460

2013-06-18  Daniele Pezzini <hyouko@gmail.com>

	* drivers/voltronic.c: Add unknown/unused and commented capability
	  entries  Might be useful for future versions.
	* data/driver.list.in: Add devices to HCL
	* drivers/voltronic.c, drivers/voltronic_ser.c,
	  drivers/voltronic_usb.c: Fix warning flag + versioning  Some UPSes
	  seem to reply with a \0 just before the end of the warning flag
	  (obtained with QWS), as a consequence of that, the string in C is 1
	  char shorter than expected (the \r is not within the string). ->
	  Fix voltronic_warning function. Increase driver versions.
	* drivers/voltronic.c, drivers/voltronic_ser.c,
	  drivers/voltronic_usb.c: Fix shutdown.return + versioning  Fix
	  shutdown.return when ondelay = 0 -> split between offdelay < 60 and
	  offdelay > 60. Increase driver versions.

2013-06-17  Daniele Pezzini <hyouko@gmail.com>

	* docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt: Correct
	  typos @shutdown.{return,stayoff}
	* drivers/voltronic.c, drivers/voltronic_ser.c,
	  drivers/voltronic_usb.c: Imrove shutdown sequence + versioning
	  Split shutdown and stopping of pending shutdowns so that if there's
	  no shutdown pending and the UPS doesn't accept a shutdown.stop in
	  this situation (i.e. it replies '(NAK') the shutdown procedure
	  doesn't get halted. Increase version number of drivers.
	* data/driver.list.in: Correct typos & add software reference in HCL
	* docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt: Improve
	  docs layout
	* drivers/voltronic_usb.c: Add USBDevice_t structure
	* drivers/voltronic_usb.c: Add comment so that autogen rules have the
	  right comment
	* drivers/voltronic_ser.c, drivers/voltronic_usb.c: Correct manpage
	  references

2013-05-14  Bo Kersey <bo@vircio.com>

	* drivers/bestfcom.c: bestfcom: Use fc.idealbvolts for calculating
	  percent charge  'I have a Best Ferrups 3.1KVA and I noticed that
	  the percent battery voltage reported from upsc never gets above
	  69.9%.  I believe there is a mistake in the driver.  The battery
	  percentage is calculated based on the High Battery Alarm Setpoint
	  (59.6V) instead of the Ideal Voltage which is about 54V (4
	  batteries x 13.6V).  I examined the source code and found that the
	  variable fc.fullvolts is the result of querying parameter 67 from
	  the UPS.  This parameter is defined per Ferrups Tip 503 as: "The
	  battery voltage at which the UPS sound a High Battery alarm"  A
	  better value to use in determining the percent battery voltage
	  would be fc.idealbvolts which is calculated in the driver source...
	  I propose the following patch to fix the battery.charge (% battery
	  full) reading.'  Ref:
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/7891

2013-05-13  Michal Soltys <soltys@ziu.info>

	* docs/nut-names.txt: Add device.uptime to nut-names.txt  Also fix
	  one typo.
	* docs/man/apcsmart.txt, drivers/apcsmart.c: apcsmart: allow users to
	  select non-canonical tty mode  The main reason behind this addition
	  is windows compatibility, see
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/7762  IGNCR
	  has been readded earlier in commit
	  20c52bee77fa0b3ea3c7f8bec25afd103b7ff4a2 - this might be enough to
	  handle windows behavior, but if it's not the case - using non
	  canonical processing (same as is present in apcsmart-old) should
	  solve any pressing issues.
	* drivers/apcsmart_tabs.c: apcsmart: add device.uptime to vartab

2013-04-26  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c, drivers/apcsmart_tabs.h: apcsmart: remove
	  APC_DEPR flag  APC_{MULTI, PRESENT} are both sufficient for
	  handling 1:n and n:1 relations

2013-04-22  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c: apcsmart: expand APC_MULTI to apc:nut 1:n cases

2013-04-15  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c, drivers/apcsmart_tabs.c: apcsmart: change
	  approach to 2 digit compatibility entries  As reported in
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/7762 - 2
	  digit values reported through 'b' are really >255V voltage values.
	  So we match whole 00 - FF set as single (fake) compat entry.

2013-04-16  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c: apcsmart: remove strchr() check from
	  legacy_verify()  As vartab doesn't contain characters from
	  APC_UNR_CMDS.

2013-04-15  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.h: apcsmart: re-add CR to ignore sets  Despite
	  icanon mode, windows (supposedly) is uncapable of ignoring CR in
	  fashion analogous to IGNCR flag.  See
	  http://article.gmane.org/gmane.comp.monitoring.nut.user/7762 for
	  rationale.
	* drivers/apcsmart_tabs.c: apcsmart: add regex format to
	  ambient.0.temperature  'T' might (on older units) also mean "ups
	  uptime", so we want to distinguish that case gracefully. The
	  formats are:  uptime: 000.0 temp: 00.00

2013-05-03  Andrew Avdeev <andrew.avdeev@gmail.com>

	* drivers/powercom-hid.c: PowerCOM BNT-1000AP HID instant commands
	  Adds a few vendor-specific HID mappings for PowerCOM.  Instant
	  commands supported on UPS [pcm]:  beeper.disable - Disable the UPS
	  beeper beeper.enable - Enable the UPS beeper beeper.toggle - Toggle
	  the UPS beeper load.off - Turn off the load immediately load.on -
	  Turn on the load immediately shutdown.return - Turn off the load
	  and return when power is back shutdown.stayoff - Turn off the load
	  and remain off test.battery.start.quick - Start a quick battery
	  test  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6435

2013-04-25  Christian Wiese <christian.wiese@securepoint.de>

	* tools/nut-scanner/Makefile.am, tools/nut-scanner/scan_usb.c: nut-
	  scanner: fix scan_usb to remove trailing spaces from output strings
	  This patch uses rtrim() from libcommon to remove trailing spaces
	  from serialnumber, device_name and vendor_name.  see:
	  https://github.com/networkupstools/nut/issues/26

2013-04-18  Arnaud Quette <arnaud.quette@free.fr>

	* docs/new-drivers.txt: Add a reference to the SNMP subdrivers
	  chapter

2013-04-15  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h: apcsmart: move variable regex matching
	  into vartab  This also allows us to properly validate (in near
	  future) cases when single apc variable can match multiple nut
	  variables.  Other changes:  - adjust rexhlp() to follow 0 for false
	  and non-0 for true, like in the rest of the functions - remove
	  valid_cmd() as rexhlp() can be used directly with formats in the
	  table; furthermore the warning (in case of failure) could be
	  confusing when we add nut:apc n:1 case

2013-04-11  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libusb.c: Set USB timeout to 5 seconds  Set the low level
	  USB timeout back to the standard 5 seconds. This was set to 4
	  seconds, for performance reasons, but is now causing issues with
	  some devices (reported by Stefan "stevenbg", GitHub issue #23)

2013-04-10  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/.gitignore: Ignore voltronic_* generated documentation
	* drivers/voltronic_usb.c: voltronic_usb: switch to new
	  is_usb_device_supported() syntax
	* tools/nut-usbinfo.pl: Add voltronic_usb driver to USB info
	  extractor tool

2013-04-10  Daniele Pezzini <hyouko@gmail.com>

	* data/driver.list.in, docs/man/Makefile.am,
	  docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt,
	  drivers/Makefile.am, drivers/voltronic.c, drivers/voltronic.h,
	  drivers/voltronic_ser.c, drivers/voltronic_usb.c: New drivers:
	  voltronic_ser/voltronic_usb  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6418

2013-04-10  Elio Parisi <E.Parisi@riello-ups.com>

	* drivers/riello.c, drivers/riello.h, drivers/riello_ser.c,
	  drivers/riello_usb.c: Riello drivers: fix memset() arguments, and
	  use stdint.h  Reference:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/6417

2013-04-04  Émilien Kia <emilien.kia@gmail.com>

	* configure.in, docs/new-clients.txt, scripts/Makefile.am,
	  scripts/README, scripts/java/.gitignore, scripts/java/Makefile.am,
	  scripts/java/README, scripts/java/jNut/.gitignore,
	  scripts/java/jNut/README, scripts/java/jNut/pom.xml,
	  .../main/java/org/networkupstools/jnut/Client.java,
	  .../java/org/networkupstools/jnut/Command.java,
	  .../main/java/org/networkupstools/jnut/Device.java,
	  .../org/networkupstools/jnut/NutException.java,
	  .../java/org/networkupstools/jnut/Scanner.java,
	  .../org/networkupstools/jnut/StringLineSocket.java,
	  .../java/org/networkupstools/jnut/Variable.java,
	  .../java/org/networkupstools/jnut/ClientTest.java,
	  .../java/org/networkupstools/jnut/ScannerTest.java,
	  scripts/java/jNutList/README, scripts/java/jNutList/pom.xml,
	  .../java/org/networkupstools/jnutlist/AppList.java,
	  scripts/java/jNutWebAPI/README, scripts/java/jNutWebAPI/pom.xml,
	  .../jnutwebapi/NutRestProvider.java,
	  .../jnutwebapi/RestWSApplication.java,
	  .../jnutwebapi/ScannerProvider.java,
	  .../jNutWebAPI/src/main/webapp/WEB-INF/web.xml: Remove java related
	  files (jNut) which will be moved to a separated repository.  See
	  issues: - https://github.com/networkupstools/nut/issues/2 -
	  https://github.com/networkupstools/nut/issues/22

2013-03-26  Alex Lov <alex@alexlov.com>

	* drivers/ietf-mib.c: Fix OID for input.bypass.voltage in ietf-mib.c
	  Ooops, forgot fix one
	* drivers/ietf-mib.c: Fix OIDs for bypass group in ietf-mib.c
	  Reference http://tools.ietf.org/html/rfc1628#page-12 For bypass
	  voltage, current and power

2013-03-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/FAQ.txt: Add a FAQ entry for supported but not working USB UPS

2013-03-10  Charles Lepple <clepple+nut@gmail.com>

	* scripts/upower/95-upower-hid.rules: upower: update generated rules
	  file

2013-03-09  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: Update VMware ESXi package link (from René
	  Garcia)

2013-02-28  Charles Lepple <clepple+nut@gmail.com>

	* Makefile.am, tools/gitlog2changelog.py: Issue #4: Specify starting
	  commit to gitlog2changelog.py

2013-02-27  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart_tabs.c: apcsmart: add old APC 600I compatibility
	  entry  Though without 'T' - until we handle situations when single
	  nut variable is able to correspond to more than one apc var.
	  Testet-by: Markus Pruehs <apc@markus.pruehs.com>

2013-02-26  Charles Lepple <clepple+nut@gmail.com>

	* tools/gitlog2changelog.py: git-changelog: really fixes #4 (missing
	  entries)  The script was discarding any commits which happened to
	  include the word 'commit'.
	* tools/gitlog2changelog.py: git-changelog: remove re.* calls for
	  simple string matching

2013-02-25  Charles Lepple <clepple+nut@gmail.com>

	* Makefile.am, tools/Makefile.am: git-changelog: Fix list of
	  distributed files
	* tools/gitlog2changelog.py: Fixes issue #4: ChangeLog now includes
	  single-file commits.
	* Makefile.am, tools/gitlog2changelog.py: Issue #4: generate
	  ChangeLog from git logs  This seems to generate long ChangeLog
	  entries in the format we had with svn2cl, but some commits appear
	  to be missing.
	* tools/gitlog2changelog.py: Import gitlog2changelog.py (2008-12-27)
	  https://github.com/cryos/avogadro/commit/8be9957e5b3b5675701ef2ed00
	  2aa9e718d4146e#scripts/gitlog2changelog.py

2013-02-25  Émilien Kia <emilien.kia@gmail.com>

	* clients/nutclient.cpp, clients/nutclient.h: Add comparison operator
	  for nut::Device class.  Make std::set<nut::Device> work and not
	  dropping devices anymore.

2012-11-02  Charles Lepple <clepple+nut@gmail.com>

	* README, scripts/upower/95-upower-hid.rules: apcupsd-ups: link to
	  man page from README  Patch by Arnaud: https://alioth.debian.org/tr
	  acker/index.php?func=detail&aid=313846&group_id=30602&atid=411544

2012-10-30  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/apcupsd-ups.txt: apcupsd-ups: Update man page with
	  variables and units

2012-09-28  Charles Lepple <clepple+nut@gmail.com>

	* drivers/apcupsd-ups.c, drivers/apcupsd-ups.h: apcupsd-ups:
	  Additional variables
	* drivers/apcupsd-ups.c, drivers/apcupsd-ups.h: apcupsd-ups: Remove
	  multiplier from ups.load

2012-09-27  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/apcupsd-ups.txt, drivers/apcupsd-ups.c: apcupsd-ups:
	  miscellaneous cleanup

2012-09-27  Andreas Steinmetz

	* docs/man/Makefile.am, docs/man/apcupsd-ups.txt,
	  drivers/Makefile.am, drivers/apcupsd-ups.c, drivers/apcupsd-ups.h:
	  apcupsd client driver   https://alioth.debian.org/tracker/?func=det
	  ail&atid=411544&aid=313846&group_id=30602

2013-02-23  Charles Lepple <clepple+nut@gmail.com>

	* drivers/bcmxcp.c: bcmxcp: remove unused variable

2013-02-16  Charles Lepple <clepple+nut@gmail.com>

	* docs/website/news.txt: News: Git conversion
	* docs/developers.txt: Update developer documentation for Git
	  repository

2013-02-21  Arnaud Quette <arnaud.quette@free.fr>

	* .gitignore, scripts/HP-UX/.gitignore: Git ignored files completion

2013-02-21  Michal Soltys <soltys@ziu.info>

	* drivers/apcsmart_tabs.c: apcsmart: minor fixups to compat. tables
	* drivers/apcsmart.c: apcsmart: verify/setup fixups  legacy_verify()
	  - check against commands we always ignore oldapcsetup() - extra
	  comments, minor flow change

2013-02-17  Charles Lepple <clepple+nut@gmail.com>

	* tools/git-svn.authors, tools/svn2cl.authors: Remove obsolete
	  authors files.

2013-02-16  Arnaud Quette <arnaud.quette@free.fr>

	* .gitignore: Git ignored files completion

2013-02-06  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* scripts/Solaris/nut.in, scripts/Solaris/postinstall.in: [Solaris]
	  Fix postinstall user/group, and service start  * Fix postinstall
	  user/group detection/creation. * Fix service start depending on the
	  mode, and add poweroff command.

2013-02-04  Emilien Kia <kiae.dev@gmail.com>

	* include/proto.h: Move __cplusplus/extern "C" begin block before to
	  fix a problem of ifdef when included in real C++ code.

2013-02-01  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* configure.in, scripts/HP-UX/makedepot.sh, scripts/HP-UX/nut.psf.in,
	  scripts/HP-UX/postinstall.in: [HP-UX] : add postinstal script for
	  installing services files.

2013-02-01  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/snmp-ups.txt: Update SNMP driver documentation  Mentioning
	  'mib' is not needed anymore since NUT 2.6.2. Also mention 'v3' as
	  an allowed value for 'snmp_version' (reported by Tim Rice)

2013-01-29  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h: apcsmart: implement #311678 (multiple
	  values per variable)  This is a bit more general than the original
	  request.  All variables that return multiple comma-separated
	  values, are added as *.N.* where 1 <= N <= APC_PACK_MAX; the
	  variables are stored with temporary name *.0.* in apcsmart_tabs.c,
	  but only at least 1 and at most 4 are added per update run
	  (superfluous - if any - are removed), with *.0.* placeholder being
	  ignored.  We assume that the particular variables cannot belong to
	  the capability set at the same time (as reported by user) -
	  otherwise we will need a bit more complex handling, including
	  updates to all setvar functions.
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: update logging
	  logic / apc_read()  - logging  This mostly adds few macros that
	  implicitly use or pass caller's name (and in case of hard errors,
	  line number). This allows removal of a few "failed" / "succeeded"
	  lines (which in practice don't really happen), for example there is
	  no need for:  upslogx(LOG_ERR, "preread_data: apc_write failed");
	  as any hard error will be reported by apc_write() internally,
	  providing the place and line number it was called at.  Similarly,
	  some upslogx / upsdebugx calls were wrapped in analogous macros to
	  provide caller's name automatically.  Debug levels (-D) were
	  adjusted to require only one letter.  - apc_read()  It's been a bit
	  more scrutinized:  - filling up full caller's buffer is considered
	  an error; shouldn't happen unless the ups is somehow damaged or
	  some model is capable of returning more than 512 bytes in one read
	  (current max I witnessed is around 270 bytes during capability
	  read) - timeout reads (whether it's allowed or not) cannot really
	  have any non-0 count, though sanity check could theoretically be
	  useful in non-canonical mode; commented out code was added for
	  reference
	* drivers/apcsmart.c: apcsmart: enhance prtchr()  So it can handle 4
	  returns with static pointers.
	* drivers/apcsmart.c: apcsmart: allow timeout on read in smartmode()
	  As this function is used to "nudge" ups, we should expect it to
	  timeout.  Also avoids extra log spam.

2013-01-29  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* scripts/Solaris/postinstall.in: Use variables to generate Solaris
	  postinstall script.
	* scripts/Solaris/postinstall.in: Enhance the Solaris post install
	  script.

2013-01-22  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/Makefile.am: Remove duplicate entries for Eaton serial
	  scan
	* include/Makefile.am, tools/nut-scanner/Makefile.am: List missing
	  header files to be distributed  nutscan-serial.h and nut_platform.h
	  were missing from the distribution
	* scripts/Solaris/.gitignore: Subversion ignored files completion
	  Mark Solaris generated packaging files as Subversion ignored (no
	  functional changes)
	* docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/nut-scanner.txt,
	  docs/man/nutscan_get_serial_ports_list.txt,
	  docs/man/nutscan_scan_avahi.txt,
	  docs/man/nutscan_scan_eaton_serial.txt,
	  docs/man/nutscan_scan_ipmi.txt, docs/man/nutscan_scan_nut.txt,
	  docs/man/nutscan_scan_snmp.txt, docs/man/nutscan_scan_usb.txt,
	  docs/man/nutscan_scan_xml_http.txt, include/nut_platform.h,
	  tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scan.h,
	  tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-
	  device.h, tools/nut-scanner/nutscan-display.c, tools/nut-
	  scanner/nutscan-serial.c, tools/nut-scanner/nutscan-serial.h,
	  tools/nut-scanner/scan_eaton_serial.c, tools/nut-
	  scanner/scan_nut.c: Add nut-scanner support for Eaton serial units
	  nut-scanner and libnutscan now provides respectively an option and
	  functions to detect Eaton serial devices. The following protocols
	  are supported: SHUT, XCP and Q1 (patch from Frederic Bohe, with
	  parts from Arnaud Quette, both for Eaton)
	* configure.in: Fix for pthread on HP-UX  pthread is compiled on a
	  stub when -lpthread is not explicitly added. This commit is a
	  duplicate of [[SVN:3801]], from Frederic Bohe (for Eaton)
	* drivers/bcmxcp_ser.c: Change baud-rates ordering for auto-detection
	* docs/new-drivers.txt, drivers/serial.c, drivers/serial.h: Add non-
	  fatal versions of ser_open / ser_set_speed

2013-01-21  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* scripts/Solaris/nut.in, scripts/Solaris/postinstall.in: Allow
	  start/stop of NUT from Solaris packages

2013-01-13  Emilien Kia <kiae.dev@gmail.com>

	* clients/cgilib.h, clients/status.h, clients/upsimagearg.h,
	  clients/upslog.h, clients/upsmon.h, clients/upssched.h,
	  clients/upsstats.h, include/common.h, include/extstate.h,
	  include/proto.h, include/state.h, include/upsconf.h, server/conf.h,
	  server/desc.h, server/netcmds.h, server/netget.h,
	  server/netinstcmd.h, server/netlist.h, server/netmisc.h,
	  server/netset.h, server/netssl.h, server/netuser.h,
	  server/sstate.h, server/stype.h, server/upsd.h, server/upstype.h,
	  server/user-data.h, server/user.h, tools/nut-scanner/nut-scan.h,
	  tools/nut-scanner/nutscan-device.h, tools/nut-scanner/nutscan-
	  init.h, tools/nut-scanner/nutscan-ip.h: Protect header files for
	  C++ inclusion.

2012-12-19  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for Lyonn CTB-1200  Add Lyonn
	  CTB-1200 (USB ID 0x0665:0x5161) to the list of blazer_usb supported
	  models (reported by Martin Sarsale)
	* docs/stable-hcl.txt: Clarify expected report for shutdown testing
	  State explicitly that, for now, a statement that the user has
	  actually tested the shutdown procedure successfully is enough
	  (report from Martin Sarsale)

2012-12-19  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* scripts/HP-UX/makedepot.sh, scripts/HP-UX/nut.psf.in: Use installed
	  binaries to create package

2012-12-18  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/delta_ups-mib.c: Fix a typo error and current multiplier
	  factor
	* data/driver.list.in, drivers/Makefile.am, drivers/delta_ups-mib.c,
	  drivers/delta_ups-mib.h, drivers/snmp-ups.c: Support for DeltaUPS
	  MIB and Socomec Netys RT 1/1  Add preliminary SNMP support for a
	  new MIB: DeltaUPS MIB, with sysOID ".1.3.6.1.4.1.2254.2.4". The
	  first known supported devices are Socomec Netys RT 1/1, equiped
	  with Netvision SNMP card

2012-12-18  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcsmart: add update_info()  No need for almost
	  identical update_info_normal() and update_info_all()
	* drivers/apcsmart.c: apcsmart: two fixups  In poll_data(): we are
	  not supposed to set variable after its (formally impossible)
	  removal  In upsdrv_shutdown(): wrong comparison

2012-12-14  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/powerp-txt.c, drivers/powerpanel.c:
	  Add support for CyberPower OL3000RMXL2U  Add CyberPower
	  OL3000RMXL2U serial support to the powerpanel driver, text protocol
	  version (Alioth patch #313910, from Timothy Pearson)

2012-12-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/Makefile.am, docs/new-drivers.txt, docs/snmp-subdrivers.txt,
	  scripts/subdriver/gen-snmp-subdriver.sh: Helper script to create
	  SNMP subdrivers stubs  Created a new shell script
	  (scripts/subdriver/gen-snmp-subdriver.sh) to automatically create a
	  "stub" subdriver. This will make it a lot easier and quicker to
	  create subdrivers for snmp-ups. A new documentation chapter has
	  also been added ("How to make a new subdriver to support another
	  SNMP device")
	* drivers/tripplite-hid.c: Add support for newer TrippLite
	  Smart1500LCD  Add newer TrippLite Smart1500LCD (USB ID
	  0x09ae:0x3016) to the list of usbhid-ups supported models (reported
	  by Steve Salier)

2012-12-12  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* drivers/mge-hid.c: Fix crash with debug level greater or equal to 2

2012-12-10  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcsmart: add prtchr() helper  Add prtchr()
	  helper and simplify reporting when we check whether some APC
	  cmd/var character is or isn't printable.
	* drivers/apcsmart_tabs.c: apcsmart: apc_cmdtab[] fixup  Earlier
	  commit that adjusted regex checks, also changed cmd fields for all
	  instant commands handled by custom functions. We cannot do that, as
	  they are not detected as supported this way.

2012-12-08  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-utalk.c, drivers/mge-utalk.h: Change Martin Loyer's
	  mail address  As per Martin's request.
	* drivers/mge-utalk.c: Improve mge-utalk general behavior  Make two
	  adjustments to improve the general behavior: first, send the double
	  "Z" prior to "Si" command. Second, inter-commands delay has been
	  increased to comply with the specification

2012-12-08  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcsmart: serial related stuff a bit more
	  strict  Also:  - apc_flush() now loops with >0 condition (otherwise
	  errored apc_read() might cause inf loop) - ser_comm_good/fail()
	  were kind of missing in write wrappers
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart:
	  sdlist/sdtype/advorder changes  - verify 'advorder' with regex -
	  remove unused defines - as the user is directed towards man page
	  either way (and without it numbers are kind of meaningless), drop
	  SDMAX
	* drivers/apcsmart.c: apcsmart: setup port after variable
	  sanitization in upsdrv_initups()
	* drivers/apcsmart.c: apcsmart: cleanup dstate ok/stale calls
	* drivers/apcsmart.c: apcsmart: getbaseinfo() fixup  In extremely
	  unlikely case of failing write, report it up and act accordingly.
	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h: apcsmart: adjust regex logic  A bit
	  simpler / tighter now.
	* drivers/apcsmart.c: apcsmart: add var_string_setup()  In theory
	  deprecate_vars() should also consider APC_STRING variables. In
	  practice - we don't have any variables that are both APC_MULTI and
	  APC_STRING - but it's more correct this way, so let's do it.
	* drivers/apcsmart.c: apcsmart: cosmetics  - code shuffling,
	  comments, flow - rename query_ups() -> legacy_verify() - add few
	  lines of help directing to man page
	* drivers/apcsmart.c: apcsmart: simplify query_ups() /
	  proto_verification()  Both functions rely now on common variable
	  verificaion function.
	* drivers/apcsmart.c: apcsmart: add var_verify()  The function will
	  be used in subsequent commit for common verification.
	* drivers/apcsmart.c: apcsmart: shuffle two functions  query_ups()
	  and oldapcsetup()
	* drivers/apcsmart.c: apcsmart: simplify query_ups()  This commit
	  changes query_ups() function and makes it rely on the same
	  deprecate_vars() logic that protocol_verify() requires.  We can
	  shorten the code a bit now, and it allows us to do more
	  simplifications in subsequent commits.
	* drivers/apcsmart.c: apcsmart: add functions informing about
	  [un]supported cmds/vars  In unified fashion, instead of each
	  protocol-verification related function doing it on its own.
	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h: apcsmart: minor tidying up  comments,
	  trivial changes, code shuffling ...
	* drivers/apcsmart.c: apcsmart: remove unused field 'def' from cchar
	  In apc_ser_diff() reporting differences between
	  tcgetattr/tcsetattr, 'def' field was unused (along with related
	  defines).

2012-12-06  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: Fix nut-scanner compilation
	  without pthread

2012-12-02  Charles Lepple <clepple+nut@gmail.com>

	* drivers/riello_usb.c: riello_usb.c: eliminate uninitialized
	  variable

2012-11-29  Arnaud Quette <arnaud.quette@free.fr>

	* conf/.gitignore: Subversion ignored files completion  Mark
	  upsmon.conf.sample as Subversion ignored, since it is now generated
	  from a .in template file (no functional changes)
	* conf/Makefile.am, conf/{upsmon.conf.sample =>
	  upsmon.conf.sample.in}, configure.in: Adapt upsmon.conf sample to
	  use configured values  The sample upsmon.conf provided now adapts
	  RUN_AS_USER value, and NOTIFYCMD / POWERDOWNFLAG base path to the
	  user configured values

2012-11-28  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/riello.c, drivers/riello_ser.c, drivers/riello_usb.c: Minor
	  improvements to Riello drivers  Fix ups.power.nominal name in
	  Riello drivers, and its value for GPSER protocol(riello_ser).
	  device.mfr was also changed in both drivers, and revisions were
	  bumped to 0.02 (patch from Elio Parisi, Riello)
	* data/driver.list.in, drivers/Makefile.am, drivers/openups-hid.c,
	  drivers/openups-hid.h, drivers/usbhid-ups.c,
	  scripts/upower/95-upower-hid.rules: Official support for Minibox
	  openUPS Intelligent UPS  Add a new usbhid-ups subdriver to handle
	  Minibox openUPS Intelligent UPS (USB ID 0x04d8:0xd004) (patch from
	  Nicu Pavel, Mini-Box.Com)

2012-11-28  Charles Lepple <clepple+nut@gmail.com>

	* conf/upsmon.conf.sample, docs/man/upsmon.conf.txt: Update
	  references to pager.txt

2012-11-27  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* data/driver.list.in, docs/man/genericups.txt: Add information about
	  Eaton Management Card Contact

2012-11-25  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/riello.c, drivers/riello.h, drivers/riello_ser.c,
	  drivers/riello_usb.c: Minor improvements to Riello drivers  Fix
	  functions and variables names to use English language. Also fix
	  warnings reported by Mac OS X Buildbot and Charles Lepple (patch
	  from Elio Parisi, Riello)

2012-11-21  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt: Complete Acknowledgements with a Riello
	  entry  Riello deserves a dedicated entry in the Supporting UPS
	  manufacturers, for having provided protocols information and
	  drivers implementations
	* docs/man/.gitignore: Subversion ignored files completion  Mark
	  riello_ser and riello_usb HTML manpages as Subversion ignored (no
	  functional changes)
	* data/driver.list.in, docs/man/.gitignore, docs/man/Makefile.am,
	  docs/man/riello_ser.txt, docs/man/riello_usb.txt,
	  drivers/.gitignore, drivers/Makefile.am, drivers/riello.c,
	  drivers/riello.h, drivers/riello_ser.c, drivers/riello_usb.c,
	  tools/nut-usbinfo.pl: Official support for Riello serial and USB
	  devices  Add two new drivers, riello_ser and riello_usb, to support
	  the whole ranges of Riello devices: IDG, IPG, WPG, NPW, NDG, DVT,
	  DVR, DVD, VST, VSD, SEP, SDH, SDL, SPW, SPT, MCT, MST, MCM, MCT,
	  MHT, MPT and MPM. This completes the official Riello protocols
	  publication, that happened in May 2012 (developed by Elio Parisi,
	  from Riello)

2012-11-20  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsclient.h, server/nut_ctype.h: Fix NSS include directives
	  The current NSS include directives (nss/nss.h) were incorrect.
	  These were failing on Redhat systems, and working on some others
	  because of the default include path (reported by Michal Hlavinka,
	  from Redhat)

2012-11-19  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for Aviem Power RT
	  1000-3000VA  Add Aviem Systems - Aviem Power RT 1000-3000VA to the
	  list of blazer_ser supported models (reported by Michael
	  Dobrovitsky)

2012-11-19  Emilien Kia <kiae.dev@gmail.com>

	* tools/nut-scanner/nutscan-device.c: Fix a memory leak in scanner.

2012-11-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/.gitignore: Complete the list of Subversion ignored files
	  Commit r3778 was missing generated HTML files (no functional
	  changes)
	* docs/man/Makefile.am: Fix installation of libnutclient manual pages
	  Commit r3777 fixed the test target, but libnutclient manual pages
	  were not actually installed
	* docs/man/.gitignore, lib/.gitignore: Complete the list of
	  Subversion ignored files  The merge of NSS and libnutclient
	  branches have left some new generated files (no functional changes)
	* docs/man/libnutclient_commands.txt,
	  docs/man/libnutclient_devices.txt,
	  docs/man/libnutclient_general.txt, docs/man/libnutclient_misc.txt,
	  docs/man/libnutclient_tcp.txt, docs/man/libnutclient_variables.txt:
	  Fix Buildbot failures on previous commit (man pages)  The merge of
	  the libnutclient branch caused a failure of the 'distcheck-light'
	  test target. Manual pages documentation in this branch uses a
	  mechanism to generate multiple manpages from one source file. This
	  was however conflicting with a Makefile rule, that requires the
	  generated file to have the same name as the source file. Applies
	  the same principle by adding the content of the Header section to
	  the NAME commands list. Also fix a typo error in the Header section
	  of libnutclient_devices

2012-11-13  Emilien Kia <kiae.dev@gmail.com>

	* clients/Makefile.am, clients/nutclient.cpp, clients/nutclient.h,
	  configure.in, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/libnutclient.txt, docs/man/libnutclient_commands.txt,
	  docs/man/libnutclient_devices.txt,
	  docs/man/libnutclient_general.txt, docs/man/libnutclient_misc.txt,
	  docs/man/libnutclient_tcp.txt, docs/man/libnutclient_variables.txt,
	  docs/new-clients.txt, lib/Makefile.am, lib/README,
	  lib/libnutclient.pc.in: Merge libnutclient (libcpp) branch   Pull
	  Request #2: "High level C and C++ libnutclient" from
	  https://github.com/clepple/nut/pull/2 . Hand-merged into SVN trunk
	  from commit: 701cc571f4f8578e9c82b13c1e9eab509a41cd7f

2012-11-08  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/man/usbhid-ups.txt, drivers/usbhid-ups.c: Add a command line
	  to usbhid-ups to activate the max_report tweak.
	* drivers/apc-hid.c, drivers/libhid.c: Fix tweak for APC Back-UPS
	  since it seems to break Back-UPS 700 connectivity (reported by
	  Denis Serov).  Adding some more comments on UPS which need and
	  which do not need the tweak. Refactored the detection code.

2012-11-07  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/subdriver/gen-usbhid-subdriver.sh: Fix USB HID subdriver
	  generation tool  This tool has not been updated since timestamps
	  were added to driver debug traces. It was thus producing erroneous
	  results (reported by Nicu Pavel)

2012-11-01  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: Fix a crash on outlets management  snmp-ups was
	  crashing when the number of outlets was equal to zero

2012-10-31  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/.gitignore, docs/man/blazer.txt: Fix blazer manual pages
	  generation  to generate blazer, blazer_ser and blazer_usb manual
	  pages. The same manual page is now distributed and available under
	  these 3 names (warning to packagers)
	* docs/man/Makefile.am, docs/man/asciidoc.conf: Fix manpage
	  refmiscinfo attributes and multiple NAME  refmiscinfo attributes
	  were previously specified through asciidoc.conf. This approach
	  prevented from specifying and generating multiple manual pages from
	  a single source. Moreover, manversion (pointing NUT version) was
	  mistyped, and thus omitted. Makefile rules now directly define
	  refmiscinfo through attributes, and allow to solve the long
	  standing blazer / blazer_ser / blazer_usb related issue, and the
	  upcoming libnutclient one

2012-10-19  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/cps-hid.c, drivers/idowell-hid.c, scripts/subdriver/gen-
	  usbhid-subdriver.sh: Replace missing occurrences in previous commit
	* docs/hid-subdrivers.txt, drivers/libhid.c, scripts/Makefile.am,
	  scripts/subdriver/{path-to-subdriver.sh => gen-usbhid-
	  subdriver.sh}: Rename usbhid subdriver generation script  This
	  script was previously named path-to-subdriver.sh, which was not
	  enough meaningful. The renaming to gen-usbhid-subdriver.sh also
	  makes sense with a potential gen-snmp-subdriver.sh
	* data/driver.list.in: HCL: Add support for Apollo 850VA  Add Apollo
	  850VA (USB ID 0x0665:0x5161) to the list of blazer_usb supported
	  models (reported by Mike Raath)

2012-10-15  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, scripts/systemd/nut-driver.service.in: Fix driver
	  path in systemd driver unit  The driver path, in nut-
	  driver.service, was not expanded correctly (reported by Marc
	  Rechté)

2012-10-15  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* data/driver.list.in: HCL: add info about new APC models  Info about
	  new SMT, SMX and SURTD models which require additional card for
	  "legacy" smart protocol.

2012-10-15  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Only fail if SSL was explicitly requested
	  Configuration should not abort if neither OpenSSL nor Mozilla NSS
	  has been found, and if SSL was not explicitly requested by the
	  user. This fixes the Buildbot compilation failure on Aix (build
	  #206)

2012-10-12  Charles Lepple <clepple+nut@gmail.com>

	* tools/git-svn.authors, tools/svn2cl.authors: Update Emilien Kia's
	  email address

2012-10-11  Arnaud Quette <arnaud.quette@free.fr>

	* docs/Makefile.am: Fix Solaris compilation failure

2012-10-10  Arnaud Quette <arnaud.quette@free.fr>

	* README: Spell check fix (test)
	* .gitignore, configure.in, docs/.gitignore, docs/Makefile.am,
	  docs/nut-qa.txt, docs/nut.dict: Spell checking framework
	  implementation  Implement a framework to spell check documentation
	  source files, using Aspell. This includes an interactive build
	  target (make spellcheck-interactive), and an automated one (make
	  spellcheck), mainly for QA / Buildbot purpose. Note that a base NUT
	  dictionnary is also available (docs/nut.dict), providing a glossary
	  of terms related to power devices and management
	* drivers/tripplite_usb.c: Remove POD ("Plain Old Documentation")
	  With the approval of the author (Charles Lepple), remove POD
	  ("Plain Old Documentation"). This embedded documentation was
	  redundant, and is probably out of date, with respect to the
	  AsciiDoc version
	* drivers/powercom.c, drivers/powercom.h, drivers/upscode2.c: Remove
	  unnecessary RCS $Id lines

2012-10-05  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nut-scan.h: Fix compilation error  Define
	  IPMI_PRIVILEGE_LEVEL_ADMIN value, in case FreeIPMI is not available

2012-10-04  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nut-scanner.txt, drivers/nut-ipmipsu.c, tools/nut-
	  scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_ipmi.c: Support power supplies scan over the network
	  nut-scanner can now scan for power supplies with IPMI over LAN.
	  This is currently limited to IPMI 1.5 only

2012-10-03  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt: Update acknowledgements

2012-09-28  Charles Lepple <clepple+nut@gmail.com>

	* drivers/.gitignore: Cleanup of svn:ignore list in drivers/ (no code
	  change)

2012-09-27  Charles Lepple <clepple+nut@gmail.com>

	* tools/git-svn.authors, tools/svn2cl.authors: Welcome, Václav! (SVN
	  username mappings)

2012-09-21  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-qa.txt: Update the link to the Ubuntu QRT script

2012-09-19  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4, tools/nut-
	  scanner/scan_ipmi.c: Support for FreeIPMI 1.1.x and 1.2.x (#2)
	  Prepare for supporting API changes in FreeIPMI 1.1.x and 1.2.x.
	  This 2nd patch, which completes [[SVN:3675]], addresses FRU API
	  changes, and removes code redundancy. This code has been tested
	  with FreeIPMI 0.8.12 and the latest [[FreeIPMI SVN]] trunk r9505
	  (reported as 1.2.0.beta2 by pkgconfig)
	* docs/download.txt, docs/website/news.txt: Update Windows package
	  publications for 2.6.5-3

2012-09-17  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt, docs/website/news.txt: Update Windows package
	  publications for 2.6.5-2

2012-09-12  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: Fix data reception loop  The new data
	  reception algorithm was trying to get more data than it should
	  (patch from Rich Wrenn)

2012-09-10  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* drivers/apc-hid.c, drivers/apc-hid.h, drivers/libhid.c: Add a tweak
	  for APC Back UPS ES  APC Back UPS ES have a buggy firmware which
	  overflows on ReportID 0x0c, i.e.
	  UPS.PowerSummary.RemainingCapacity. This results in battery.charge
	  not being exposed and endless reconnections on systems with libusb
	  reporting EOVERFLOW. And it results on a failure to init the driver
	  for  systems with libusb not reporting EOVERFLOW but EIO (i.e. on
	  Windows).
	* tools/nut-scanner/nut-scanner.c: [nut-scanner] Fix a crash when no
	  start IP is provided.
	* drivers/apc-hid.c, drivers/bcmxcp_usb.c, drivers/belkin-hid.c,
	  drivers/blazer_usb.c, drivers/cps-hid.c, drivers/idowell-hid.c,
	  drivers/liebert-hid.c, drivers/mge-hid.c, drivers/powercom-hid.c,
	  drivers/richcomm_usb.c, drivers/tripplite-hid.c,
	  drivers/tripplite_usb.c, drivers/usb-common.c, drivers/usb-
	  common.h: Extend USB device support check (from Arnaud Quette)  Use
	  USBDevice_t structure in is_usb_device_supported(), instead of
	  direct VendorID and ProductID. This allows to pass it to the
	  specific processing handler for broader check

2012-09-07  Leo Arias <elopio-guest@alioth.debian.org>

	* conf/nut.conf.sample: Update nut.conf.sample (grammar and
	  documentation)   https://alioth.debian.org/tracker/?func=detail&ati
	  d=411544&aid=313762&group_id=30602

2012-08-14  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS, UPGRADING, configure.in, data/driver.list.in,
	  docs/Makefile.am, docs/configure.txt, docs/documentation.txt,
	  docs/download.txt, docs/images/eaton-logo.png,
	  docs/images/hostedby.png, docs/images/simple.png,
	  docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/macosx-ups.txt, docs/man/mge-shut.txt,
	  docs/man/nutscan.txt, docs/man/nutscan_scan_avahi.txt,
	  docs/man/powercom.txt, docs/man/skel.txt, docs/nut-names.txt,
	  docs/website/.gitignore, docs/website/Makefile.am,
	  docs/website/css/web-layout.css, docs/website/news.txt,
	  docs/website/old-news.txt, docs/website/projects.txt,
	  docs/website/web-layout.conf, drivers/.gitignore,
	  drivers/Makefile.am, drivers/macosx-ups.c, drivers/mge-hid.c,
	  drivers/powercom-hid.c, drivers/skel.c, drivers/usbhid-ups.c,
	  drivers/usbhid-ups.h, m4/nut_check_libltdl.m4: Merge from trunk
	  [[SVN:3679]] to [[SVN:3718]] to ssl-nss-port

2012-08-09  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/.gitignore, docs/website/Makefile.am,
	  docs/website/news.txt, docs/website/old-news.txt: Integrate
	  archived news
	* docs/nut-names.txt, drivers/mge-hid.c: Add shutdown ability switch
	  to Eaton units  Eaton HID units (using usbhid-ups or [new,old]mge-
	  shut) were missing a data mapping to allow the change of the
	  shutdown ability switch. The result was that the UPS was not
	  powered off, even if all the protocol commands were sent (reported
	  by Daniel O'Connor)
	* docs/download.txt, docs/website/news.txt: Update Windows package
	  publications for 2.6.5-1
	* docs/man/.gitignore, docs/man/index.txt: Added macosx-ups manual
	  page to the index  Also add generated groff and HTML contents to
	  the list of Subversion ignored files

2012-08-08  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS, UPGRADING, configure.in, docs/website/news.txt: Final update
	  for 2.6.5 release
	* drivers/.gitignore: Subversion ignored files completion  Mark
	  oldmge-shut binary as Subversion ignored (no functional changes)
	* docs/configure.txt, m4/nut_check_libltdl.m4: Complete libltdl
	  configuration options  Add configure options to add specific cflags
	  (--with-libltdl-includes) and libs (--with-libltdl-libs) for
	  libltdl. This serves at least to point at non standard location, as
	  on FreeBSD (reported by David Durieux)

2012-08-06  Arnaud Quette <arnaud.quette@free.fr>

	* docs/documentation.txt: Add a Wikipedia reference on Solar
	  controller
	* docs/Makefile.am, docs/images/eaton-logo.png,
	  docs/images/hostedby.png, docs/website/Makefile.am,
	  docs/website/css/web-layout.css, docs/website/web-layout.conf: Free
	  NUT from Eaton website hosting  NUT is no more hosted by Eaton.
	  Arnaud Quette (NUT project leader) has taken over NUT hosting on
	  his own, to give NUT back some independance. This effort is also
	  part of a logic to stop crediting Eaton for contributions from
	  others (especially Arnaud Quette, as an individual). The new
	  hosting service is located, as for Arnaud's blog
	  (http://arnaud.quette.fr) on Gandi servers, using PaaS. This will
	  allow more flexibility and automation of the release process

2012-08-06  Charles Lepple <clepple+nut@gmail.com>

	* configure.in, docs/man/Makefile.am, docs/man/macosx-ups.txt,
	  drivers/Makefile.am, drivers/macosx-ups.c: macosx-ups: new OS X
	  Power Sources meta-driver  Mac OS X provides UPS status information
	  in a format similar to what is shown for laptop batteries. This
	  driver will convert that information into a format compatible with
	  NUT.

2012-08-05  Charles Lepple <clepple+nut@gmail.com>

	* drivers/skel.c: Update comments in skel.c  Fixed a typo, and added
	  fatalx() as an alternative to fatal_with_errno()
	* docs/man/skel.txt: Update skeleton driver man page.

2012-08-03  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/nutscan.txt, docs/man/nutscan_scan_avahi.txt: nutscan
	  documentation: editing

2012-07-31  Arnaud Quette <arnaud.quette@free.fr>

	* docs/images/simple.png: Remove extraneous text
	* data/driver.list.in: HCL: Add support for UNITEK Alpha650ipF and
	  Alpha650ipE  Add UNITEK Alpha650ipF and Alpha650ipE (USB ID
	  0x0f03:0x0001) to the list of blazer_usb supported models (reported
	  by Pascal MIRALLES)
	* docs/website/projects.txt: Reference Buffalo NAS in Related
	  projects  Add a reference in the Related projects, on Buffalo
	  TerraStation (Business-class) NAS range, which uses NUT for power
	  protection

2012-07-30  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt, docs/website/news.txt: First NUT virtualization
	  package (VMware ESXI 5.0)  Add the reference to the first NUT
	  virtualization package. This one is currently an external effort to
	  add VMware NUT client for ESXI 5.0. But this support will be part
	  of NUT in the long run

2012-07-24  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in, docs/man/powercom.txt, drivers/powercom-hid.c:
	  Synchronize Powercom USB documentation and code comments.
	  Apparently, there are at least two different models with the USB
	  VID:PID of 0d9f:0004. This update is based on the following report
	  by Gordon Longland:  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2012-July/007748.html

2012-07-23  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/powercom.txt: powercom: Mention this driver is serial only

2012-07-20  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* data/driver.list.in, drivers/Makefile.am: Switch mge-shut to
	  oldmge-shut and newmge-shut to mge-shut
	* docs/man/mge-shut.txt: Update mge-shut man page for notification
	  argument.
	* drivers/usbhid-ups.c: Add a "notification" parameter to newmge-shut
	  driver.  It is only here for compatibility with mge-shut driver. It
	  is ignored since we are always using SHUT_SYNC_OFF in libshut.c.

2012-07-20  Emilien Kia <kiae.dev@gmail.com>

	* README, docs/Makefile.am, docs/config-notes.txt, docs/contact-
	  closure.txt, docs/macros.txt, docs/man/mge-shut.txt,
	  docs/man/upscli_connect.txt, docs/man/upscli_disconnect.txt,
	  docs/man/upscli_fd.txt, docs/man/upscli_get.txt,
	  docs/man/upscli_list_next.txt, docs/man/upscli_list_start.txt,
	  docs/man/upscli_readline.txt, docs/man/upscli_sendline.txt,
	  docs/man/upscli_ssl.txt, docs/man/upscli_strerror.txt,
	  docs/man/upscli_upserror.txt, docs/man/upsclient.txt,
	  docs/scheduling.txt, docs/security.txt: Fix trunk merge (pass 2).
	  Apply changes to doc to prepare merge to trunk.

2012-07-19  Emilien Kia <kiae.dev@gmail.com>

	* clients/upsclient.c, server/netssl.c, server/netssl.h: Fix trunk
	  merge. Refactor and clean to prepare merge to trunk.

2012-07-19  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/man/mge-shut.txt: Document ondelay parameter unit discrepency
	  for SHUT drivers  mge-shut uses a ten seconds unit for ondelay
	  whereas newmge-shut uses seconds.
	* drivers/usbhid-ups.c, drivers/usbhid-ups.h: Add a lowbatt setting
	  to newmge-shut in order to mimic mge-shut setting

2012-07-19  Emilien Kia <kiae.dev@gmail.com>

	* server/Makefile.am, server/conf.c, server/netcmds.h, server/{ssl.c
	  => netssl.c}, server/{ssl.h => netssl.h}, server/upsd.c: Replace
	  server/ssl.[h|c] by server/netssl.[h|c] in order to prepare nss
	  branch merging.

2012-07-18  Emilien Kia <kiae.dev@gmail.com>

	* .gitignore, INSTALL, MAINTAINERS, Makefile.am, NEWS, UPGRADING,
	  autogen.sh, clients/Makefile.am, clients/upsc.c,
	  clients/upsclient.c, clients/upsclient.h, clients/upsmon.c,
	  clients/upsmon.h, clients/upsrw.c, clients/upssched.c,
	  common/Makefile.am, common/common.c, common/parseconf.c,
	  common/state.c, common/upsconf.c, compile, conf/nut.conf.sample,
	  conf/upsd.conf.sample, configure.in, data/cmdvartab,
	  data/driver.list.in, docs/.gitignore, docs/FAQ.txt,
	  docs/Makefile.am, docs/acknowledgements.txt, docs/cables.txt,
	  docs/cables/apc.txt, docs/config-notes.txt, docs/configure.txt,
	  docs/design.txt, docs/developer-guide.txt, docs/developers.txt,
	  docs/documentation.txt, docs/download.txt, docs/features.txt,
	  docs/images/advanced.png, docs/images/bigbox.png,
	  docs/images/bizarre.png, docs/images/nut-logo.png,
	  docs/images/nut.svg, docs/images/simple.png, docs/macros.txt,
	  docs/maintainer-guide.txt, docs/man/.gitignore,
	  docs/man/Makefile.am, docs/man/apcsmart-old.txt,
	  docs/man/apcsmart.txt, docs/man/bcmxcp.txt, docs/man/belkinunv.txt,
	  docs/man/blazer.txt, docs/man/dummy-ups.txt, docs/man/index.txt,
	  docs/man/metasys.txt, docs/man/nut-ipmipsu.txt, docs/man/nut-
	  recorder.txt, docs/man/nut-scanner.txt, docs/man/nut.conf.txt,
	  docs/man/nutscan.txt, docs/man/nutscan_add_device_to_device.txt,
	  docs/man/nutscan_add_option_to_device.txt,
	  docs/man/nutscan_cidr_to_ip.txt,
	  docs/man/nutscan_display_parsable.txt,
	  docs/man/nutscan_display_ups_conf.txt,
	  docs/man/nutscan_free_device.txt, docs/man/nutscan_init.txt,
	  docs/man/nutscan_new_device.txt, docs/man/nutscan_scan_avahi.txt,
	  docs/man/nutscan_scan_ipmi.txt, docs/man/nutscan_scan_nut.txt,
	  docs/man/nutscan_scan_snmp.txt, docs/man/nutscan_scan_usb.txt,
	  docs/man/nutscan_scan_xml_http.txt, docs/man/nutupsdrv.txt,
	  docs/man/oneac.txt, docs/man/powercom.txt, docs/man/snmp-ups.txt,
	  docs/man/ups.conf.txt, docs/man/upsc.txt,
	  docs/man/upscli_list_start.txt, docs/man/upsd.users.txt,
	  docs/man/upsmon.txt, docs/man/upsrw.txt, docs/net-protocol.txt,
	  docs/new-clients.txt, docs/new-drivers.txt, docs/nut-names.txt,
	  docs/security.txt, docs/sock-protocol.txt, docs/stable-hcl.txt,
	  docs/support.txt, docs/website/Makefile.am, docs/website/css/web-
	  layout.css, docs/website/faviconut.ico, docs/website/faviconut.png,
	  docs/website/news.txt, docs/website/projects.txt, docs/website/ups-
	  protocols.txt, docs/website/web-layout.conf, drivers/.gitignore,
	  drivers/Makefile.am, drivers/apc-hid.c, drivers/apc-mib.c,
	  drivers/apcsmart-old.c, drivers/apcsmart-old.h, drivers/apcsmart.c,
	  drivers/apcsmart.h, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h, drivers/bcmxcp.c, drivers/bcmxcp.h,
	  drivers/bcmxcp_ser.c, drivers/bcmxcp_usb.c, drivers/belkin-hid.c,
	  drivers/belkinunv.c, drivers/bestfcom.c, drivers/bestfortress.c,
	  drivers/bestpower-mib.c, drivers/bestups.c, drivers/blazer.c,
	  drivers/blazer_ser.c, drivers/blazer_usb.c, drivers/compaq-mib.c,
	  drivers/cps-hid.c, drivers/cyberpower-mib.c, drivers/cyberpower-
	  mib.h, drivers/dstate.c, drivers/dstate.h, drivers/dummy-ups.c,
	  drivers/dummy-ups.h, drivers/eaton-mib.c, drivers/eaton-mib.h,
	  drivers/etapro.c, drivers/gamatronic.c, drivers/genericups.c,
	  drivers/ietf-mib.c, drivers/isbmex.c, drivers/libhid.c,
	  drivers/libshut.c, drivers/liebert-esp2.c, drivers/liebert-hid.c,
	  drivers/main.c, drivers/masterguard.c, drivers/metasys.c,
	  drivers/mge-hid.c, drivers/mge-mib.c, drivers/mge-shut.c,
	  drivers/mge-utalk.c, drivers/microdowell.c, drivers/netvision-
	  mib.c, drivers/netxml-ups.c, drivers/nut-ipmi.h, drivers/nut-
	  ipmipsu.c, drivers/nut-libfreeipmi.c, drivers/oneac.c,
	  drivers/oneac.h, drivers/powercom-hid.c, drivers/powercom.c,
	  drivers/powercom.h, drivers/powerware-mib.c, drivers/raritan-pdu-
	  mib.c, drivers/rhino.c, drivers/safenet.c, drivers/snmp-ups.c,
	  drivers/snmp-ups.h, drivers/solis.c, drivers/tripplite-hid.c,
	  drivers/tripplite_usb.c, drivers/tripplitesu.c, drivers/upscode2.c,
	  drivers/upshandler.h, drivers/usb-common.c, drivers/usbhid-ups.c,
	  include/.gitignore, include/Makefile.am, include/common.h,
	  include/extstate.h, include/nut_stdint.h, include/parseconf.h,
	  include/state.h, lib/.gitignore, lib/Makefile.am, lib/README,
	  lib/libnutscan.pc.in, lib/libupsclient-config.in,
	  lib/libupsclient.pc.in, m4/ax_create_stdint_h.m4,
	  m4/nut_check_libavahi.m4, m4/nut_check_libfreeipmi.m4,
	  m4/nut_check_libltdl.m4, m4/nut_check_libwrap.m4,
	  m4/nut_check_os.m4, m4/nut_report_feature.m4, scripts/HP-
	  UX/.gitignore, scripts/HP-UX/makedepot.sh, scripts/HP-
	  UX/nut.psf.in, scripts/Makefile.am, scripts/README,
	  scripts/augeas/Makefile.am, scripts/augeas/README,
	  scripts/avahi/nut.service.in, scripts/java/Makefile.am,
	  scripts/java/README, scripts/java/jNut/README,
	  scripts/java/jNut/pom.xml,
	  .../main/java/org/networkupstools/jnut/Client.java,
	  .../java/org/networkupstools/jnut/Command.java,
	  .../main/java/org/networkupstools/jnut/Device.java,
	  .../org/networkupstools/jnut/NutException.java,
	  .../java/org/networkupstools/jnut/Scanner.java,
	  .../org/networkupstools/jnut/StringLineSocket.java,
	  .../java/org/networkupstools/jnut/Variable.java,
	  .../java/org/networkupstools/jnut/ClientTest.java,
	  .../java/org/networkupstools/jnut/ScannerTest.java,
	  scripts/java/jNutList/README, scripts/java/jNutList/pom.xml,
	  .../java/org/networkupstools/jnutlist/AppList.java,
	  scripts/java/jNutWebAPI/README, scripts/java/jNutWebAPI/pom.xml,
	  .../jnutwebapi/NutRestProvider.java,
	  .../jnutwebapi/RestWSApplication.java,
	  .../jnutwebapi/ScannerProvider.java,
	  .../jNutWebAPI/src/main/webapp/WEB-INF/web.xml,
	  scripts/logrotate/nutlogd, scripts/python/module/PyNUT.py,
	  scripts/systemd/Makefile.am, scripts/systemd/README,
	  scripts/systemd/nut-driver.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in,
	  scripts/systemd/nutshutdown.in, scripts/udev/.gitignore,
	  scripts/udev/Makefile.am, scripts/udev/README, scripts/udev/nut-
	  ipmipsu.rules.in, scripts/ufw/README,
	  scripts/ufw/nut.ufw.profile.in, scripts/upower/95-upower-hid.rules,
	  server/Makefile.am, server/netcmds.h, server/netget.c,
	  server/netget.h, server/netinstcmd.c, server/netinstcmd.h,
	  server/netlist.c, server/netlist.h, server/netmisc.c,
	  server/netmisc.h, server/netset.c, server/netset.h,
	  server/netssl.c, server/netssl.h, server/netuser.c,
	  server/netuser.h, server/{ctype.h => nut_ctype.h}, server/sstate.c,
	  server/sstate.h, server/upsd.c, server/upsd.h, server/user.c,
	  tests/Makefile.am, tests/cpputest.cpp, tests/example.cpp,
	  tools/Makefile.am, tools/git-svn.authors, tools/nut-hclinfo.py,
	  tools/{device-recorder.sh => nut-recorder.sh}, tools/nut-
	  scanner/Makefile.am, tools/nut-scanner/README, tools/nut-
	  scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/nutscan-device.c, tools/nut-scanner/nutscan-device.h,
	  tools/nut-scanner/nutscan-display.c, tools/nut-scanner/nutscan-
	  init.c, tools/nut-scanner/nutscan-init.h, tools/nut-
	  scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h, tools/nut-
	  scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
	  scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c, tools/nut-
	  snmpinfo.py, tools/nut-usbinfo.pl, tools/svn2cl.authors: Merge from
	  trunk [[SVN:2848]] to [[SVN:3679]] to ssl-nss-port.  Note: a
	  problem is occurring for server/ssl.[h|c]: they have been moved to
	  server/netssl.[h|c] but consider them as removed.  For the branch
	  merging to trunk, consider paying attention to the case of these
	  files (removing them by hand).

2012-07-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apc-mib.c: APC SNMP MIB update and completion  Add
	  available high precision values, new variables
	  (input.transfer.reason, battery.current.total and ups.test.date),
	  and move ambient.{temperature,humidity}.{high,low} to ambient.1.*,
	  since they relate to alarm threshold of external probe 1 (patch
	  from Hong-Gunn Chew)
	* docs/nut-names.txt: Clarify the use of multiple ambient sensors
	  Multiple sensors can be exposed using the indexed notation.
	  'ambient.*', without index or using '0', relates to the embedded
	  sensor. For example: 'ambient.temperature' represent the embedded
	  sensor temperature. Other sensors (external, communication card,
	  ...) can use indexes from '1' to 'n'. For example:
	  'ambient.1.temperature' for the first external sensor temperature.
	* docs/nut-names.txt: NUT namespace completion  Add two new variables
	  'ups.test.date' and 'battery.current.total'. Also add a note on the
	  'ambient' collection for supporting multiple sensors

2012-07-16  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/nut-ipmipsu.c, drivers/nut-libfreeipmi.c,
	  m4/nut_check_libfreeipmi.m4, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_ipmi.c: Support for FreeIPMI 1.1.x and 1.2.x
	  Prepare for supporting API changes in FreeIPMI 1.1.x and 1.2.x.
	  This is mostly related to SDR API simplifications. A 2nd iteration
	  will probably address code redundancy, whenever possible

2012-07-10  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/eaton-mib.c, drivers/eaton-mib.h,
	  drivers/snmp-ups.c, drivers/snmp-ups.h: Add support for Eaton ePDU
	  Switched (Pulizzi)  Implement support for older Eaton / Powerware
	  ePDU Switched. These were once sold as Pulizzi, and have now been
	  replaced by newer model (Eaton Marlin implementation and others)

2012-07-09  Emilien Kia <kiae.dev@gmail.com>

	* configure.in: Fix CppUnit detection.  Fix inconsistent test for
	  CppUnit install (using pkg-config) to really enable unit tests.

2012-07-05  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nut-ipmipsu.txt: Fix an error on possible power supplies
	  status

2012-07-04  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upssched.c: Fix upssched regression  Coverity branch merge
	  [[SVN:3555]] introduced a regression: any upssched.conf command
	  that takes a second argument resulted in a defective frame sent to
	  the parent process. Thus, the command was not executed (patch from
	  Oliver Schonefeld)
	* Makefile.am, configure.in, tests/.gitignore, tests/Makefile.am,
	  tests/cpputest.cpp, tests/example.cpp: Add basic infrastructure for
	  unit tests  Merge eki-unittests branch, with some adjustments, to
	  add a basic initial infrastructure for unit tests, using CppUnit
	  (v1.9.6+) (from Emilien Kia, from Eaton)

2012-07-03  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/systemd/nut-driver.service.in,
	  scripts/systemd/nutshutdown.in: Fix upsdrvctl call path  upsdrvctl
	  is located in @driverexecdir@, not @SBINDIR@ (reported by Michal
	  Hlavinka, from Redhat)

2012-06-15  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Adapt systemd installation directory #2  Complete
	  previous commit by also adapting paths for service files

2012-06-14  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Adapt systemd installation directory  Adapt systemd
	  installation directory for the shutdown script, so that it does not
	  try to install it in the actual system directory, but to the
	  pointed build directory, including a sub directory prefix
	* docs/new-clients.txt: Fix broken link to upscli_*(3) HTML manual
	  pages

2012-06-12  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Fix WITH_SSL and WITH_NSS AM_CONDITIONAL definitions
	  nut_with_nss / nut_with_openssl must be set to "yes", otherwise
	  AM_CONDITIONAL counterpart WITH_NSS / WITH_SSL is not defined
	* docs/new-drivers.txt: Forgotten mention  upsdrv_info_t->name is
	  also published as "driver.name" variable
	* docs/man/belkinunv.txt, drivers/belkinunv.c, drivers/main.c,
	  drivers/masterguard.c, drivers/metasys.c, drivers/mge-utalk.c,
	  drivers/microdowell.c, drivers/nut-ipmipsu.c, drivers/safenet.c,
	  drivers/tripplitesu.c, drivers/usbhid-ups.c: Remove redundant
	  driver.version.internal publication
	* configure.in, docs/configure.txt, docs/man/nut-scanner.txt: Add
	  missing references to libltdl for nut-scanner  nut-scanner requires
	  libltdl (Libtool dlopen abstraction) since NUT 2.6.3.
	  Documentations have been completed, and nut-scanner build status is
	  now exposed in the build configuration summary
	* drivers/snmp-ups.c: Fix publication of driver.version.data  Publish
	  the MIB name and version in driver.version.data, rather than merged
	  into driver.version.internal
	* drivers/netxml-ups.c: Fix publication of driver.version.data
	  netxml-ups subdriver version is to be tracked in
	  driver.version.data, not in driver.version.internal
	* docs/nut-names.txt: Add missing variable driver.version.data  Add
	  variable driver.version.data, to track version of the internal data
	  mapping, for generic drivers (reported by Luiz Angelo Daros de
	  Luca)
	* docs/nut-names.txt: Fix comment for driver.version.internal
	  Drivers internal version are always tracked separately, and stored
	  in driver.version.internal

2012-06-11  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcsmart: tcsetattr/tcgetattr addendum  This
	  small patch moves the comparison sequence into separate function.
	  No functional changes.  Also minor retab! run on defines.

2012-06-11  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for REDi Blazer  Add REDi
	  Blazer 400VA / 600VA / 800VA to the list of blazer_ser supported
	  models (reported by Marius Gavrilescu)
	* docs/nut-names.txt: Fix a typo error on power.minimum description
	  power.minimum is really the minimum seen apparent power in VA
	  (reported by Luiz Angelo Daros de Luca)

2012-06-07  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/blazer_usb.c: HCL:  Add support for
	  Online Zinto A to blazer_usb  Add Online Zinto A (USB ID
	  0x06da:0x0601) to the list of blazer_usb supported models (reported
	  by Carsten Burkhardt)

2012-06-07  Charles Lepple <clepple+nut@gmail.com>

	* drivers/oneac.h: Remove unused constants to fix LLVM compilation
	  error.

2012-06-05  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/news.txt, docs/website/projects.txt: WMNut updates
	  Update WMNut release (0.64) and hosting URL

2012-06-04  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt, docs/website/news.txt: Update Windows package
	  publications for 2.6.4-1

2012-05-31  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS, UPGRADING, configure.in, docs/website/news.txt: Final update
	  for 2.6.4 release

2012-05-30  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for Cyber Power Systems
	  CP1000PFCLCD  Add CyberPower Systems CP1000PFCLCD (USB ID
	  0x0764:0x0501) to the list of usbhid-ups supported models (reported
	  by David Owen)
	* drivers/apc-mib.c: Track more APC SNMP sysOID values, as comments
	* drivers/upshandler.h: Fix code spacing (no functional change)
	* drivers/bcmxcp_ser.c, drivers/bcmxcp_usb.c: Add some debug traces
	  on incoming / outgoing data
	* INSTALL: Add missing reference to nut.conf manual page
	* drivers/bestfortress.c: Improve Best Fortress LI675VA support
	  Apply an old missed patch: all responses are preceded and
	  terminated by "CR LF". But bestfortress driver discards anything
	  after the first "CR LF". This patch trims everything up to the
	  first LF. (patch from Jørgen Thomsen)
	* drivers/metasys.c: Remove extraneous spaces (no functional changes)

2012-05-30  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* scripts/Solaris/preinstall: Updated preinstall script for 'nut'
	  group, user checking
	* Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/Solaris/preinstall: Added checking for existing 'nut'
	  group, user and updated package name

2012-05-29  Arnaud Quette <arnaud.quette@free.fr>

	* common/parseconf.c: Fix CVE-2012-2944: upsd can be remotely crashed
	  NUT server (upsd), from versions 2.4.0 to 2.6.3,  are exposed to
	  crashes when receiving random data from the network.  This issue is
	  related to the way NUT parses characters, especially from the
	  network. Non printable characters were missed from strings
	  operation (such as strlen), but still copied to the buffer, causing
	  an overflow.  Thus, fix NUT parser, to only allow the subset Ascii
	  charset from Space to ~  (Reported by Sebastian Pohle, Alioth bug
	  #313636, CVE-2012-2944)
	* data/driver.list.in: HCL: Add support for Lexis X-power Tigra 1kVA
	  Add Lexis X-power Tigra 1kVA to the list of blazer_ser or bestups
	  supported models (reported by Tmima Pliroforikis Perifereiakis
	  Enotitas Pierias)
	* data/driver.list.in: HCL: Encourage the use of blazer_ser instead
	  of bestups  Mention blazer_ser as prefered compared to bestups.
	  Recent changes to blazer_ser have made it possible to use it
	  instead of bestups. In the end, bestups will be replaced by
	  blazer_ser, as for other Megatec/Q1 drivers

2012-05-29  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* Makefile.am, configure.in, tools/nut-scanner/Makefile.am,
	  tools/nut-scanner/nut-scan.h, tools/nut-scanner/nutscan-init.c,
	  tools/nut-scanner/nutscan-init.h, tools/nut-scanner/scan_snmp.c:
	  Changes in nut-scanner to remove Sparc 'usmAESPrivProtocol' error
	  while creating package

2012-05-29  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer.c, drivers/blazer_ser.c: Improve Best UPS support in
	  blazer  Best UPS units, which use a subset of the Megatec/Q1
	  protocol, supported by the blazer drivers, can now work with
	  blazer_ser. This support is still limited, but already offers a
	  decent set of features

2012-05-25  Arnaud Quette <arnaud.quette@free.fr>

	* server/user.c: Add debug traces for instcmds and actions  Whenever
	  upsd adds an instant command or an action, from upsd.users, display
	  a debug trace
	* docs/man/upsd.users.txt: Clarify multiple actions specification
	  Add more details and an example, to illustrate multiple actions
	  specification (reported by Emilien Kia, from Eaton)

2012-05-24  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for Eaton Management Card
	  Contact  Add Eaton Management Card Contact (ref 66104) to the list
	  of mge-shut or mge-utalk supported models
	* drivers/compaq-mib.c: HP SNMP completion  Complete HP SNMP mapping
	  table, with thresholds, nominal values and more commands

2012-05-23  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/projects.txt: Reference Thecus NAS in Related projects
	  Add a reference in the Related projects, on Thecus NAS range, which
	  uses NUT for power protection

2012-05-22  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apcsmart.c, drivers/apcsmart.h: Complete previous commit
	  for HP-UX  HP-UX does not support VREPRINT, so make it conditional
	* drivers/apcsmart.c, drivers/apcsmart.h: Fix commit [[SVN:3603]]
	  Commit [[SVN:3603]] (fix tcsetattr() / tcgetattr() issue) has
	  introduced some incompatibility with older Unix systems, such as
	  Solaris, Aix and HP-UX. The present commit should address it.
	* scripts/java/jNut/src/main/java/org/networkupstools/jnut/Variable.j
	  ava: Adjust comment (no functional change)
	* configure.in, docs/net-protocol.txt, server/netcmds.h,
	  server/netmisc.c, server/netmisc.h: Add versioning to the network
	  protocol  Due to the number of recent evolutions to the network
	  protocol, along with other possible future changes, NUT network
	  protocol is now versioned. The chapter "Network protocol
	  information", of the developer guide, stores the revision history,
	  while a new "NETVER" command serves this information through the
	  protocol

2012-05-21  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Complete the supported PowerWalker ranges
	  Add PowerWalker Online VFI LCD, Line-Interactive VI LCD and Line-
	  Interactive VI models to the list of blazer_usb supported models
	* data/driver.list.in: HCL: Add support for Microline C-Lion Innova
	  ranges  Add Microline C-Lion Innova models to the list of
	  blazer_usb supported models

2012-05-21  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* Makefile.am, scripts/HP-UX/Makefile, scripts/HP-UX/nut.psf.in,
	  scripts/Makefile.am: generalized 'make package' call for Solaris,
	  HPUX package; updated nut.psf.in for HPUX

2012-05-21  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for KOLFF ranges  Add KOLFF
	  BLACK NOVA models to the list of blazer_usb supported models
	* data/driver.list.in: HCL: Add support Ippon INNOVA RT range  Add
	  Ippon INNOVA RT models to the list of blazer_usb supported models
	* data/driver.list.in: HCL: Add support for Gtec ranges  Add Gtec
	  models to the list of blazer_ser or blazer_usb supported models
	* data/driver.list.in: HCL: Complete the supported EVER ranges  Add
	  EVER POWERLINE RT / 11 / 31 and DUO II Pro models to the list of
	  blazer_ser or blazer_usb supported models
	* data/driver.list.in: HCL: Add support for COVER ENERGY SA ranges
	  Add COVER ENERGY SA models to the list of blazer_usb supported
	  models
	* data/driver.list.in: HCL: Add support for Borri ranges  Add Borri
	  models to the list of blazer_usb supported models
	* data/driver.list.in: HCL: Add support for ARTronic ranges  Add
	  ARTronic models, both serial and USB, to the list of blazer_ser and
	  blazer_usb supported models

2012-05-21  Charles Lepple <clepple+nut@gmail.com>

	* drivers/belkin-hid.c: Fix Liebert firmware (incorrect exponents)
	  There are at least two Liebert firmware types which both report a
	  VID:PID of 10af:0001. The newer ones tend not to have the Belkin
	  broken Usage Pages (and therefore use standard HID PDC paths) but
	  they have incorrect exponents for some fields. This patch fixes the
	  values for the latter implementation

2012-05-21  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/netvision-mib.c: Add 3-phases support
	  to Socomec Netvision MIB  Improve Socomec Netvision MIB, by adding
	  support for 3-phases UPS (patch from Manuel Bouyer)
	* data/driver.list.in: HCL: Add support for PowerShield Defender
	  1200VA  Add PowerShield Defender 1200VA (USB ID 0665:5161) to the
	  list of blazer_usb supported models (reported by Tom Clarkson)
	* drivers/blazer.c, drivers/blazer_ser.c, drivers/blazer_usb.c:
	  beeper.status belongs to the "ups" data collection

2012-05-16  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apcsmart.c, drivers/apcsmart.h: Final fix to the
	  tcsetattr() / tcgetattr() issue  The most likely cause of all
	  spurious differences between what was set on the port with
	  tcsetattr() and what tcgetattr() shows are likely to do with the
	  c_local PENDIN flag, which is a status bit, not a control bit. It
	  will change when there's unread pending input, which can be quite
	  often on an APC UPS.  The right way to compare struct termios
	  values is to clear the status flags _after_ the tcsetattr() and of
	  course after the tcgetattr() call and then compare the result with
	  what was set.  Also set NOKERNINFO, if available, as we don't want
	  the UPS or noise on the line to accidentally trigger status output
	  back to the UPS, and finally make sure IEXTEN is also cleared along
	  with ISIG since it too can cause weird things to happen.  This
	  change also adds some debug code to show any differences in the
	  structures in a logical manner in debug output (and squashes one
	  tiny compiler warning) (patch from Greg A. Woods)
	* docs/config-notes.txt, docs/man/upsmon.txt: Whitespace fixes
	  Remove some extraneous spaces, suggested by "git diff --check", and
	  improve a bit formatting (patch #36 from Greg A. Woods)

2012-05-15  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: Remove dead code  Remove
	  dead code, related to shutdown handling (no functional changes)
	  (based on patch #29 from Greg A. Woods)

2012-05-15  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* scripts/Solaris/Makefile.am: Updated scripts/Solaris/Makefile.am to
	  remove prototype, checkinstall

2012-05-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Fix formating issue
	* docs/nut-names.txt: Add missing battery.voltage data to the
	  namespace  Add missing battery.voltage.{low,high} to the standard
	  NUT namespace
	* docs/nut-names.txt, drivers/upscode2.c: Rename peakcurrent to
	  current.peak (as per RFC)  Rename peakcurrent to current.peak,
	  since it is more coherent and suitable
	* drivers/dummy-ups.c, drivers/dummy-ups.h: Update and cleanup
	  Convert flags defitions to bitwise left shift, convert some
	  comments about variables to actual values, and do a bit of cleanup
	  (patch #27 from Greg A. Woods)

2012-05-15  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* scripts/Solaris/checkinstall, scripts/Solaris/precheck.py,
	  scripts/Solaris/prototype: Deleted checkinstall, prototype files

2012-05-15  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer.c: Add comment on shutdown.return ondelay value  Add
	  a comment reinforcing the need for ondelay=3 (partial patch #26
	  from Greg A. Woods)
	* docs/man/snmp-ups.txt: Complete APC SNMP compatibility information
	  Mention more varieties of APC SNMP cards, and mention the POWERNET
	  MIB (patch #25 from Greg A. Woods)

2012-05-15  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/Solaris/pkginfo.in, scripts/Solaris/prepackage.py,
	  scripts/Solaris/preproto.pl: Added perl script to create prototype
	  file onsolaris platform, updated Makefile.am
	* m4/nut_check_os.m4: Added perl script to create prototype file
	  onsolaris platform, updated Makefile.am

2012-05-15  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/netvision-mib.c: Fix status processing for "ECO mode"  When
	  running in "ECO mode", the driver should report an ups.status set
	  to "OL", or it otherwise ends up with an empty string that confuses
	  upsmon (patch from Ivan Kuznetsov)

2012-05-14  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/blazer.txt: Mention General Electric in blazer manual page
	  Mention General Electric as a user of the Megatec/Q1 protocol
	  (patch #24 from Greg A. Woods)
	* clients/upsmon.h: Use bitwise left shift for flags definitions  Use
	  (1 << N) to define a bit flag at bit N, which is more coherent with
	  other similar implementations in NUT (patch #23 from Greg A. Woods)
	* clients/upsmon.c: Cosmetic changes  Remove dead / redundant
	  #defines, and enable interesting debug traces that were commented
	  out (based on patch #22 from Greg A. Woods)
	* drivers/apcsmart.h: Use bitwise left shift for status flags
	  definitions  Use (1 << N) to define a bit flag at bit N, which is
	  more coherent with other similar implementations in NUT (patch #21
	  from Greg A. Woods)
	* drivers/apcsmart.c, drivers/apcsmart.h: Don't be too strict about
	  terminal settings  Don't log an error when tcgetattr() reports
	  different settings on the port (patch #20 from Greg A. Woods)
	* tools/nut-usbinfo.pl: Better filtering on USB related files  The
	  current USB information extraction script is not optimal at
	  filtering files that need to be inspected. While waiting for a
	  proper rewrite, improve a bit more filenames filtering (patch #18
	  from Greg A. Woods)
	* drivers/blazer_ser.c: Quote the debug output for space visibility
	  Quote the debug output so one can see how many spaces there are
	  (patch #16 from Greg A. Woods)
	* docs/cables/apc.txt: Update APC cabling information  Update
	  information about APC cable model numbering and revisions (patch
	  #16 from Greg A. Woods)
	* data/driver.list.in: HCL: GE Digital Energy updates  Rename "GE" to
	  "GE Digital Energy", which is more appropriate in this context.
	  Also add GT Series 1000-3000 VA to the list of blazer_ser supported
	  models (patch #15 from Greg A. Woods)
	* docs/developers.txt: Complete notes on spaces for alignements  Add
	  complementary note on the use of spaces for alignements (patch #14
	  from Greg A. Woods)
	* docs/design.txt: Use more suitable examples  Use an example driver
	  name matching the unified NUT drivers generic manual page name
	  (patch #13 from Greg A. Woods)
	* drivers/mge-hid.c: Complete and update Eaton HID usages table

2012-05-11  Arnaud Quette <arnaud.quette@free.fr>

	* tools/Makefile.am: Fix typo in comment  Fix a typo error in comment
	  (reported by Fred Bohé, from Eaton)
	* scripts/upower/95-upower-hid.rules: Update upower script  Update
	  upower script with recent changes and updates (redundant with patch
	  #6 from Greg A. Woods)
	* tools/Makefile.am: Explicit mention of Makefiles brokenness
	  Document that, at least, this Makefile.am is broken by design
	  (patch #5 from Greg A. Woods)
	* docs/man/apcsmart.txt: Fix documentation wording  "there're" is not
	  a valid contraction, especially not in a technical document (patch
	  #4 from Greg A. Woods)
	* docs/man/apcsmart.txt: Always use upper case for the acronym "UPS"
	  Be consistent in using all upper case for the acronym "UPS" (Ie
	  Uninterruptible Power Supply) (patch #3 from Greg A. Woods)
	* docs/man/apcsmart.txt: Fix SmartUPS cabling nomenclature  Correct
	  the nomenclature of the SmartUPS cabling part numbers (patch #2
	  from Greg A. Woods)
	* configure.in: Fix a configure error message  Asciidoc might
	  actually be installed but documentation might still not be build-
	  able (earlier messages should hint at exactly what was missing)
	  (patch #1 from Greg A. Woods)
	* data/driver.list.in: HCL: Add support for ATEK Defensor range  Add
	  ATEK Defensor range (Innova series) to the list of blazer_usb
	  supported models
	* data/driver.list.in: HCL: Fix EVER brand name  The correct name is
	  "EVER", not "EVER UPS", as per a request from the manufacturer

2012-05-10  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/news.txt: Update for WMNut 0.63 publication
	* docs/website/ups-protocols.txt: Official Riello protocols
	  publication

2012-05-08  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* Makefile.am, scripts/Solaris/Makefile.am,
	  scripts/Solaris/prepackage.py: Added python script to create
	  pkginfo.in and checkinstall scripts depending upon the solaris
	  platform

2012-05-03  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libshut.c, drivers/mge-shut.c: Forgotten driver version
	  bump
	* clients/upsmon.c: Coverity fix on upsmon  Remove an unneeded null
	  check, that cause a Coverity error (reported by Michal Hlavinka
	  from RedHat)
	* drivers/libshut.c, drivers/mge-shut.c: Coverity fix on Eaton SHUT
	  Fix some tests that are always false, regardless of the values of
	  operands (reported by Michal Hlavinka from RedHat)

2012-05-02  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt, docs/website/news.txt: Update Windows package
	  publications
	* common/Makefile.am, include/Makefile.am: Better handling of
	  nut_version.h  nut_version.h should not be distributed, since it is
	  automatically built. Moreover, hard dependency in common/ is not
	  needed since BUILT_SOURCES reference ensure generation before any
	  other target:
	  http://www.gnu.org/software/automake/manual/automake.html#Sources
	  (Reported by Regid Ichira, Debian bug #613643)

2012-04-27  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/cps-hid.c: Add support for CyberPower
	  Systems PR6000LCDRTXL5U  Add CyberPower Systems PR6000LCDRTXL5U
	  (USB ID 0x0764:0x0601) to the list of usbhid-ups supported models
	  (reported by Dax Kelson)
	* data/driver.list.in: HCL: Complete HP supported devices list  Add
	  HP UPS Management Module to the list of snmp-ups supported models.
	  Also complete serial compatibility for some models, using mge-shut

2012-04-25  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nut-scanner.txt: Clarify nut-scanner compilation and
	  distribution  Document explicitely how nut-scanner is compiled, and
	  how its features are made available, according to its dependencies
	  (both compile time and runtime)

2012-04-24  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-init.c,
	  tools/nut-scanner/nutscan-init.h, tools/nut-scanner/scan_avahi.c,
	  tools/nut-scanner/scan_ipmi.c, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c,
	  tools/nut-scanner/scan_xml_http.c: Cleaner exit for nut-scanner

2012-04-23  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: Be
	  more verbose when failing to dynamically load a library

2012-04-14  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/nut-recorder.txt, tools/nut-recorder.sh: Create nut-
	  recorder manual page
	* drivers/tripplite-hid.c: HP USB UPS completion #3  Remove R/T3000
	  USB ID (0x03f0:0x1fe5) from the TrippLite HID mapping, since it is
	  supported by the Eaton HID mapping. This completes commit
	* drivers/usbhid-ups.c: Correct Celsius temperatures that should be
	  in Kelvin  Check if raw value is in the Kelvin range, to detect
	  buggy values that are already expressed in Celsius degrees, as
	  found on some HP devices
	* docs/developer-guide.txt, tools/Makefile.am, tools/{device-
	  recorder.sh => nut-recorder.sh}: Rename device-recorder to nut-
	  recorder
	* data/driver.list.in: HCL: Reorder Dell devices by connection type

2012-04-10  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/systemd/nut-driver.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in,
	  scripts/systemd/nutshutdown.in: Fix broken systemd integration in
	  the build system  Step 2: add the theoretical path templates to the
	  systemd scripts. This however requires adjustments to the RPM
	  package. Namely, upsd and upsmon will have to be installed in
	  /sbin, instead of the current /usr/sbin
	* configure.in, scripts/systemd/Makefile.am: Fix broken systemd
	  integration in the build system  Step 1: remove Makefile rules that
	  were both useless, and causing warning. Generate nut-*.service
	  files from .in templates in configure, as it should be, which is
	  currently void since there is no target to substitute. This has
	  however required to export SBINDIR and PIDPATH through AC_SUBST, in
	  configure
	* clients/upsrw.c, common/state.c, docs/man/upscli_list_start.txt,
	  docs/man/upsrw.txt, docs/net-protocol.txt, docs/new-drivers.txt,
	  docs/sock-protocol.txt, drivers/dstate.c, drivers/dstate.h,
	  include/extstate.h, include/state.h, server/netget.c,
	  server/netlist.c, server/netset.c, server/sstate.c,
	  server/sstate.h: Support of ranges of values for writable variables
	  It is now possible to specify one or more ranges of values for
	  writable variables, using dstate_addrange() in drivers. upsd also
	  supports the new type 'RANGE' for 'GET TYPE', along with the 'LIST
	  RANGE' command. Finally, users can interact through upsrw, which
	  displays the supported ranges, and enforces new value checking
	  against the provided boundaries
	* drivers/mge-hid.c: HP USB UPS completion #2  Address HP USB/HID
	  devices, that use the Eaton HID definitions. This includes the
	  latest products range (USB IDs 0x1fe5, 0x1fe6, 0x1fe7 and 0x1fe8),
	  and few more variables and commands
	* drivers/mge-hid.c: Fix Eaton / MGE outlet.2.switchable flags
	  outlet.2.switchable should only be writable to enable ECO mode on
	  Ellipse ECO, Protection Station and some 3S. Other models should
	  only expose it as read only (reported by Prachi Gandhi from Eaton,
	  Alioth bug #313587)

2012-04-04  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/Makefile.am, scripts/logrotate/nutlogd: Provide log
	  rotation configuration for NUT  Provide a basic configuration file
	  for managing rotation (logrotate) of NUT log files, generated by
	  upslog

2012-04-02  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Update the namespace  Complete the namespace
	  with missing variables and commands, that are either known or have
	  had an RFC
	* docs/man/.gitignore: Subversion ignored files completion  Mark
	  nutscan_init.html as Subversion ignored (no functional changes)

2012-03-31  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: HCL: Add support for AEG Power Solutions
	  PROTECT HOME  Add AEG Power Solutions PROTECT HOME (USB ID
	  0x0665:0x5161) to the list of blazer_ser and blazer_usb supported
	  models (reported by Joachim Schiele)

2012-03-30  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp_usb.c: Add debug traces for read / write commands
	* common/common.c, include/common.h: Improve support functions for
	  trimming strings  Enforce verifications in rtrim, and add an ltrim
	  function

2012-03-29  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/blazer_usb.c: Add support Innova
	  online UPS family  Add Innova T (0x06da:0x0201), Innova RT
	  (0x06da:0x0005) and Innova 3/1 T (0x06da:0x0004) to the list of of
	  blazer_usb and blazer_ser supported models. Innova series are
	  online UPS supporting Q1 for compatibility, and many more commands.
	  Better support, either through blazer_* rewrite or through a new
	  driver, is considered as a future possibility

2012-03-24  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, docs/Makefile.am, docs/security.txt,
	  scripts/Makefile.am, scripts/ufw/.gitignore, scripts/ufw/README,
	  scripts/ufw/nut.ufw.profile.in: Uncomplicated Firewall (UFW)
	  support  Provide an Uncomplicated Firewall (UFW) profile
	  (nut.ufw.profile) to tightly integrate NUT, along with some
	  documentation completion for the Security chapter of the user
	  manual

2012-03-23  Arnaud Quette <arnaud.quette@free.fr>

	* conf/nut.conf.sample, docs/man/nut.conf.txt: Fix nut.conf
	  documentation and sample file  Since nut.conf is intended to be
	  sourced by shell scripts, spaces must not be added around the equal
	  sign. Fix documentation and sample file to conform to this purpose,
	  and add bold warning (reported by Tim Rice, Alioth bug #312452)
	* clients/upsmon.c, server/upsd.c: Detect duplicate instances of upsd
	  / upsmon  Fix a long standing issue, that is the lack of detection
	  of duplicate upsd / upsmon instances when starting another one of
	  these daemons. This previously resulted in inconsistencies, such as
	  being unable to stop the daemon, due to its .pid file being removed
	  by the newly started instance (last reported by Andrew Min Chang)

2012-03-21  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* drivers/libshut.c: Avoid stack corruption on invalid frame  In the
	  protocol, the frame size can be 8 bytes max. That is why the frame
	  buffer is only 8 bytes long. If the frame is corrupted, the size
	  read may be up to 15, which may corrupt the stack while writing
	  into the frame buffer. This patch add a simple sanity check on the
	  size to avoid a crash and enforce protocol limitation.
	* drivers/libshut.c: Fix SHUT variables read (from Arnaud Quette)
	* drivers/bcmxcp.c, drivers/bcmxcp.h, drivers/bcmxcp_usb.c: Change
	  timeout for PW9120  Current timeout (1 sec) is too short for
	  PW9120: numerous frames are lost. Setting this to 2 seconds fix
	  this.
	* drivers/libshut.c: Deactivate UPS notification  Currently this
	  driver is ignoring notification by automatically sending NACK when
	  they are received. Nevertheless,this behavior creates communication
	  errors with some UPS (M2200). So this patch completly disable the
	  sending of notification from the UPS. Ideally we should correclty
	  implement notifications managment for optimal performance, but with
	  this patch, at least, communiaton works.
	* drivers/libshut.c: Fix shut notification mask

2012-03-09  Arnaud Quette <arnaud.quette@free.fr>

	* docs/config-notes.txt: Emphasize special characters
	* data/driver.list.in, drivers/tripplite-hid.c: HP USB UPS completion
	  #1  Address HP USB/HID devices, that use the TrippLite HID
	  definitions. This includes new ProductIDs, and few more variables
	  and commands
	* drivers/oneac.h: Remove extraneous comment start

2012-03-08  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* common/parseconf.c, common/upsconf.c, docs/config-notes.txt: More
	  flexible '=' character managment in conf files  This allow to
	  support the following forms : 'foo = bar', 'foo=bar', 'foo =bar'
	  and 'foo= bar'

2012-03-06  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/oneac.txt, drivers/oneac.c, drivers/oneac.h: Improve
	  general OneAC support (oneac 0.80)  Improve support for all
	  families of Oneac (EG, ON, OZ and OB), including support for more
	  data and instant commands (patch from Bill Elliot)

2012-03-05  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer.c, drivers/blazer_ser.c, drivers/blazer_usb.c:
	  Guesstimate battery high and low voltages  Add an automatic
	  estimation for high and low voltages, to be able to determine
	  battery charge. This should cover most cases, but a bold mention
	  has been added at driver startup, to inform the user. Driver
	  version (USB and serial) have been bumped to reflect this change
	* drivers/blazer.c: Set 'FSD' status flag upon need  As per the
	  recent decision to allow driver to set 'FSD' status flag, set 'FSD'
	  upon "Shutdown imminent" detection

2012-03-02  Arnaud Quette <arnaud.quette@free.fr>

	* autogen.sh, scripts/augeas/Makefile.am: Sanity check before python
	  script execution  Only generate Augeas ups.conf lens if we can
	  import required Python modules (re,glob,codecs)
	* docs/man/blazer.txt: Fix typo error in runtimecal example values
	* docs/stable-hcl.txt: Improve formating
	* docs/new-drivers.txt: Formalize the use of the FSD status flag  As
	  an exception, drivers are now allowed to set the "FSD" (Forced
	  ShutDown) status flag when an imminent shutdown has been detected

2012-02-29  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsc.c, docs/man/upsc.txt: Client side implementation of
	  "LIST CLIENT"  Implement "LIST CLIENT" in upsc, using "-c <device
	  name>"
	* docs/net-protocol.txt, server/netlist.c: Adjust server side
	  implementation of "LIST CLIENT"  Commands of the "LIST" family have
	  to be coherent with the command name. Ie, "LIST CLIENT" should use
	  the same "CLIENT" prefix, or it will otherwise break client side
	  verification mechanism
	* server/netlist.c: Adjust "LIST CLIENTS" implementation  Adjust
	  "LIST CLIENTS" implementation to be more coherent with other
	  network protocol commands
	* docs/net-protocol.txt: Document new "LIST CLIENTS" command
	* server/upsd.c, server/upsd.h: Remove upsd "info" command  Adjust
	  initial "LIST CLIENTS" commit, by removing the upsd "info" command,
	  which is not suitable, and redundant with the "LIST CLIENT" command
	  of the network protocol  [Fixed compilation error]

2012-02-29  Charles Lepple <clepple+nut@gmail.com>

	* scripts/python/module/PyNUT.py: Add support for LIST CLIENTS, etc.
	  to PyNUT.  Patch by Rene Martín Rodríguez <rmrodri@ull.edu.es>.
	  Merged with typo fixes in repository.  Covers LIST CLIENTS, FSD,
	  HELP and VER. Module version bumped to 1.2.2.  Discussion:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/5871
	* server/netlist.c, server/upsd.c, server/upsd.h: Add new "LIST
	  CLIENTS" command to NUT protocol.  Patch by Rene Martín Rodríguez
	  <rmrodri@ull.edu.es>, with indentation changed to tabs.
	  Discussion:
	  http://article.gmane.org/gmane.comp.monitoring.nut.devel/5870
	* drivers/blazer.c: Update URL to Megatec protocol description.

2012-02-28  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/liebert-hid.c: UPower optimization  Always spell
	  manufacturer names the same way across the various USB drivers.
	  This avoids duplication of manufacturer entries in
	  scripts/upower/95-upower-hid.rules, during automatic generation

2012-02-27  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/cps-hid.c: Add support for CyberPower
	  OR700LCDRM1U  Add CyberPower OR700LCDRM1U (0x0764:0x0601) to the
	  list of usbhid-ups supported models (reported by Brian McCann)

2012-02-22  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: drivers/apcsmart.c: setvar_string() and
	  apc_write_long() bugfixes  setvar_string() couldn't function
	  properly, due to the use of wrong variable.  Not associated with
	  any bugreport (reported directly to email).
	* drivers/apcsmart.c: drivers/apcsmart.c: make
	  tcsetattr()/tcgetattr() difference not fatal  This is follow up
	  from earlier bug report (#313395). Earlier commit should have fixed
	  the issue, but the original submitter never commented on it.  Just
	  in case - instead of making it fatal, we only log the issue.

2012-02-20  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c, tools/nut-scanner/scan_snmp.c: Better handling
	  of Net-SNMP AES PrivProtocol  Handle smartly issues related to Net-
	  SNMP support and declaration of AES PrivProtocol

2012-02-19  Charles Lepple <clepple+nut@gmail.com>

	* drivers/snmp-ups.c, drivers/snmp-ups.h: Don't allocate storage for
	  variables in snmp-ups.h  The header files should declare variables
	  as extern, and they should be allocated in only one .c file (not
	  all of the files which include the .h file). While this is not an
	  immediate problem when only one .c file includes the .h file, it
	  still should be fixed in case that changes in the future.  Patch by
	  Daniel Macks: http://fink.cvs.sourceforge.net/viewvc/fink/experimen
	  tal/dmacks/finkinfo/nut.patch?revision=1.1&view=markup
	* drivers/bcmxcp.c, drivers/bcmxcp.h: Don't allocate storage for
	  variables in bcmxcp.h  The header files should declare variables as
	  extern, and they should be allocated in only one .c file (not all
	  of the files which include the .h file). This was causing multiple
	  symbol definitions on Mac OS X.  Patch by Daniel Macks: http://fink
	  .cvs.sourceforge.net/viewvc/fink/experimental/dmacks/finkinfo/nut.p
	  atch?revision=1.1&view=markup

2012-02-16  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/blazer_usb.c: Add support for Online
	  Yunto YQ450  Add Online Yunto YQ450 (0x06da:0x0002) to the list of
	  blazer_usb supported models (reported by Thomas Maisl)

2012-02-16  Charles Lepple <clepple+nut@gmail.com>

	* tools/git-svn.authors, tools/svn2cl.authors: Update SVN username
	  mappings

2012-02-14  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add support for Tripp-Lite OMNISMART500  Add
	  Tripp-Lite OMNISMART500 (productID 0001) to the list of
	  tripplite_usb supported models (reported by Matt Schulte)

2012-02-10  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Support for Dell UPS Network Management Card
	  Add Dell UPS Network Management Card to the list of snmp-ups and
	  netxml-ups supported models. SNMP support currently relies on IETF
	  (RFC-1628) MIB, and not on Dell UPS MIB

2012-02-09  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Remove useless lib_mutex and buggy
	  dev_mutex

2012-02-03  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am: Update ChangeLog generation and fix text wrapping
	  Adapt the ChangeLog file generation process to correctly wrap text,
	  even with the new 'git style' format, used for Subversion commit
	  messages

2012-02-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp.c, drivers/bcmxcp.h: Improve XCP support for battery
	  status  Add support for battery test publication in
	  ups.test.result, and RB (replace battery) in ups.status

2012-01-31  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bestfortress.c: Add more debug traces  Add more debug
	  traces, again, to work on the checksum corruption issue

2012-01-23  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-mib.c: Clean and complete MGE MIB  Complete MGE MIB for
	  status, variables and commands, using IETF MIB OIDs when needed.
	  Macro have also been replaced by actual numeric OID paths for
	  better clarity.
	* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups shutdown support
	  snmp-ups now provides support for UPS shutdown, based on usbhid-ups
	  mechanisms (composite commands and fallback). Composite commands
	  are also supported. This means, for example, that if
	  'shutdown.return' is not supported, a combination of 'load.off' +
	  'load.on' may be used.
	* drivers/ietf-mib.c: Fix invalid variable name  Beeper status
	  belongs to the 'ups' data collection
	* drivers/snmp-ups.c: Check validity of instant commands before
	  addition  Prior to adding new instant commands, referenced OIDs are
	  now checked for existance. This avoid adding commands that are not
	  supported
	* docs/man/upsmon.txt: Fix upsmon synopsis  Add the missing '-K'
	  (Test for the shutdown flag) to upsmon synopsis (reported by Regid
	  Ichira)

2012-01-20  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Support for Riello Netman Plus 102 SNMP Card
	  Add Riello Netman Plus 102 SNMP Card, and attached Sentinel SDL
	  6000-7 and Sentinel Dual SDH 1000-7 UPS, to the list of snmp-ups
	  supported models (reported by Rainer Stumbaum)

2012-01-19  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bestfortress.c: Add more debug traces, to work on the
	  checksum corruption issue

2012-01-18  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt, drivers/usbhid-ups.c: Adjust ups.start.auto
	  value for shutdown commands  When present, ups.start.auto value
	  needs to be adjusted for shutdown.{return,stayoff} to behave as
	  expected. This is limited to Eaton devices (reported by Rich Wrenn)

2012-01-11  Arnaud Quette <arnaud.quette@free.fr>

	* UPGRADING: Cleanup garbage line  Remove garbage line that was added
	  by accident during the AsciiDoc branch merge or work
	* tools/nut-scanner/Makefile.am, tools/nut-scanner/nutscan-init.c,
	  tools/nut-scanner/scan_nut.c: Move libupsclient to weak runtime
	  dependencies  libupsclient, as other libraries used by nut-scanner,
	  is now a weak runtime dependency, through the use of lt_dl*()
	  functions. This means that libupsclient is not anymore required,
	  but only suggested. This should also solve the distcheck-light
	  compilation on Aix (on behalf of Frédéric Bohe, from Eaton)

2012-01-10  Michal Hlavinka <mhlavink@redhat.com>

	* drivers/dstate.c: do not forget to check send_to_one return value
	  send_to_one free()s connection, we can't use it after failure.
	* drivers/bcmxcp.c: do not call getinfo twice, use returned value for
	  parsing  result was stored, but never used. Another dstate_getinfo
	  call was used instead of stored value. Probably result of copy-
	  paste.
	* tools/nut-scanner/scan_xml_http.c: do not use unterminated string
	  in strlen  recvfrom returns raw data without null termination, this
	  string can't be used in strlen. Use number of recieved bytes
	  returned by recvfrom instead of strlen.
	* clients/upssched.c: do not send garbage on retry  because write and
	  read commands shared one buffer, on retry we did not send command
	  again, but last read data
	* drivers/tripplite_usb.c: prevent buffer overflow in hexascdump
	  haxascdump uses fixed size static buffer, but it had no checks to
	  assure result can fit into that buffer.
	* tools/nut-scanner/scan_nut.c: ups variable was allocated, but not
	  free()d
	* drivers/rhino.c, drivers/solis.c: use automatic time_t variable
	  instead of allocated one  time_t value is small enough to be
	  automatic variable instead of allocated one. It eliminates risk we
	  forget to free it again.
	* drivers/bcmxcp.c: do not forget to free pTmp  even if len is zero,
	  pTmp should be freed
	* drivers/mge-utalk.c: prevent null pointer dereference in strchr  in
	  some cases p can be null causing null pointer dereference of v
	  (initialized to 0) in strchr command
	* drivers/bcmxcp_usb.c: Fix condition in re-try loop making error
	  checking unreachable  for loop with condition retry <= MAX_TRIES
	  ends with retry = MAX_TRIES+1. This breaks following error check
	  with retry == MAX_TRIES condition, because it's true only in case
	  when last retry actualy succeeded.

2012-01-09  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bestups.c: Add the missing driver variable "battvoltmult"
	  (patch from Sadara Kael)

2012-01-06  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/snmp-ups.c: Reword the message when sysOID detection fails
	* drivers/compaq-mib.c: Add the sysOID value, and bump the MIB
	  version to 1.1 (reported by Jack Challen)
	* docs/download.txt: Remove inline SHA-256 sum, and provide links to
	  MD5 and SHA-256 sums

2012-01-05  Arnaud Quette <arnaud.quette@free.fr>

	* server/netget.c: GET UPSDESC does not need device sanity checks
	  (i.e. connected, with fresh data) to answer  (reported by Emilien
	  Kia, Alioth bug #313323)
	* data/driver.list.in: Add Dynamix 1000VA USB to the list of
	  blazer_usb supported models  (requires "langid_fix=0x0409" in
	  ups.conf; reported by Glen Ogilvie)

2012-01-04  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Add the missing SHA-256 sum on the Download page
	  / section  (needs to be generated after the distribution package)
	* docs/website/news.txt: Update 2.6.3 release date

2012-01-03  Arnaud Quette <arnaud.quette@free.fr>

	* NEWS, UPGRADING, configure.in, docs/website/news.txt: Final update
	  for 2.6.3 release

2012-01-03  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/config-notes.txt: Add a note about file names with space
	  characters in the documentation.

2012-01-03  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/dummy-ups.c: Add a comment for further processing

2012-01-03  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: Fix nut scanner SNMP v3 help
	  message.
	* docs/man/nut-scanner.txt: Fix nut scanner SNMP v3 documentation.

2011-12-30  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* configure.in, scripts/Solaris/Makefile.am,
	  scripts/Solaris/checkinstall, scripts/Solaris/nut.in,
	  scripts/Solaris/pkginfo.in, scripts/Solaris/postinstall.in,
	  scripts/Solaris/postremove, scripts/Solaris/preinstall,
	  scripts/Solaris/preremove.in, scripts/Solaris/prototype: Added
	  Solaris Packaging scripts

2011-12-17  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer_usb.c: Actually apply the langid_fix value, ...
	  ...when calling usb_get_string (reported by Charles Lepple)
	* data/driver.list.in, docs/man/blazer.txt, drivers/blazer_usb.c: Try
	  to fix language ID support for USB units from LDLC, Dynamix ...
	  ...and no names in blazer_usb (reworked patch, from Brian R. Smith
	  and Aurélien Grenotton)

2011-12-16  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/HP-UX/.gitignore: Add the generated HP-UX packaging script
	  (.psf) to the list of ignored files
	* drivers/eaton-mib.c, drivers/snmp-ups.c: Fix newer Eaton ePDU OIDs
	  declaration ordering, ...  ...so that it better supports the
	  various models (switched or advanced monitored)

2011-12-15  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsclient.c, drivers/belkinunv.c, drivers/etapro.c,
	  drivers/gamatronic.c, drivers/isbmex.c, drivers/libshut.c,
	  drivers/metasys.c, drivers/mge-shut.c, drivers/microdowell.c,
	  drivers/nut-libfreeipmi.c, drivers/rhino.c, drivers/solis.c: Fix
	  set but not used variables [-Wunused-but-set-variable]  (including
	  patch from Regid Ichira)

2011-12-13  Arnaud Quette <arnaud.quette@free.fr>

	* compile: Update compile script, as per the latest version available
	  in Automake (1.11)
	* docs/man/.gitignore: Add the generated nutscan_init.3 Groff manual
	  page...  ...to the list of ignored files
	* tools/nut-scanner/Makefile.am, tools/nut-scanner/scan_ipmi.c: Add
	  IPMI power supplies discovery to nut-scanner
	* drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4: Separate
	  IPMI requirements, between FRU lookup and monitoring.  This way, we
	  can at least compile nut-scanner with IPMI support and a limited
	  (no monitoring) version of nut-ipmipsu, using older (pre 1.0.1)
	  FreeIPMI versions

2011-12-12  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/Makefile.am: Unconditional compile of scan_*
	  source code...  ...since now they contains the relevant stub
	  function.
	* tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  Clean call to nutscan include files
	* tools/nut-scanner/nutscan-init.c: Fix wrong variable name
	* tools/nut-scanner/nut-scanner.c: Fix wrong call to
	  nutscan_scan_avahi
	* tools/nut-scanner/Makefile.am: Forgot to include nutscan-init.h in
	  Makefile
	* docs/man/Makefile.am, docs/man/nutscan_init.txt,
	  docs/man/nutscan_scan_avahi.txt, docs/man/nutscan_scan_ipmi.txt,
	  docs/man/nutscan_scan_nut.txt, docs/man/nutscan_scan_snmp.txt,
	  docs/man/nutscan_scan_usb.txt, docs/man/nutscan_scan_xml_http.txt:
	  Update documentation
	* tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  Make sure not to call any non-initialized function pointers.
	* tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scan.h,
	  tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-init.c,
	  tools/nut-scanner/nutscan-init.h, tools/nut-scanner/scan_avahi.c,
	  tools/nut-scanner/scan_ipmi.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  Keep the same API whatever the library are at compile time...
	  ...(so some scan functions may be stub only) Add an init function +
	  variable to know the available scan method at run time.  Update
	  nut-scanner accordingly.

2011-12-09  Arnaud Quette <arnaud.quette@free.fr>

	* Makefile.am, configure.in, libltdl/COPYING.LIB,
	  libltdl/Makefile.am, libltdl/Makefile.in, libltdl/Makefile.inc,
	  libltdl/README, libltdl/aclocal.m4, libltdl/argz.c,
	  libltdl/argz_.h, libltdl/config-h.in, libltdl/config/compile,
	  libltdl/config/config.guess, libltdl/config/config.sub,
	  libltdl/config/depcomp, libltdl/config/edit-readme-alpha,
	  libltdl/config/general.m4sh, libltdl/config/getopt.m4sh,
	  libltdl/config/install-sh, libltdl/config/ltmain.m4sh,
	  libltdl/config/ltmain.sh, libltdl/config/mdate-sh,
	  libltdl/config/missing, libltdl/config/mkstamp,
	  libltdl/config/texinfo.tex, libltdl/configure,
	  libltdl/configure.ac, libltdl/libltdl/lt__alloc.h,
	  libltdl/libltdl/lt__dirent.h, libltdl/libltdl/lt__glibc.h,
	  libltdl/libltdl/lt__private.h, libltdl/libltdl/lt__strl.h,
	  libltdl/libltdl/lt_dlloader.h, libltdl/libltdl/lt_error.h,
	  libltdl/libltdl/lt_system.h, libltdl/libltdl/slist.h,
	  libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
	  libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
	  libltdl/loaders/loadlibrary.c, libltdl/loaders/preopen.c,
	  libltdl/loaders/shl_load.c, libltdl/lt__alloc.c,
	  libltdl/lt__dirent.c, libltdl/lt__strl.c, libltdl/lt_dlloader.c,
	  libltdl/lt_error.c, libltdl/ltdl.c, libltdl/ltdl.h,
	  libltdl/m4/argz.m4, libltdl/m4/autobuild.m4, libltdl/m4/libtool.m4,
	  libltdl/m4/ltdl.m4, libltdl/m4/ltoptions.m4, libltdl/m4/ltsugar.m4,
	  libltdl/m4/ltversion.in, libltdl/m4/ltversion.m4,
	  libltdl/m4/lt~obsolete.m4, libltdl/slist.c, libltdl/stamp-mk,
	  m4/nut_check_libltdl.m4, tools/nut-scanner/Makefile.am: Delete the
	  bundled version of libltdl, ...  and add detection and integration
	  for the system provided version. nut-scanner build now depends on
	  the existence of libltdl on the system
	* autogen.sh: Revert commit [[SVN:3344]],  ...since it causes
	  problems with documentation build, due to INSTALL being overwritten

2011-12-09  Charles Lepple <clepple+nut@gmail.com>

	* autogen.sh: Force files to be overwritten (especially for libtool)

2011-12-07  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* Makefile.am, configure.in, libltdl/COPYING.LIB,
	  libltdl/Makefile.am, libltdl/Makefile.in, libltdl/Makefile.inc,
	  libltdl/README, libltdl/aclocal.m4, libltdl/argz.c,
	  libltdl/argz_.h, libltdl/config-h.in, libltdl/config/compile,
	  libltdl/config/config.guess, libltdl/config/config.sub,
	  libltdl/config/depcomp, libltdl/config/edit-readme-alpha,
	  libltdl/config/general.m4sh, libltdl/config/getopt.m4sh,
	  libltdl/config/install-sh, libltdl/config/ltmain.m4sh,
	  libltdl/config/ltmain.sh, libltdl/config/mdate-sh,
	  libltdl/config/missing, libltdl/config/mkstamp,
	  libltdl/config/texinfo.tex, libltdl/configure,
	  libltdl/configure.ac, libltdl/libltdl/lt__alloc.h,
	  libltdl/libltdl/lt__dirent.h, libltdl/libltdl/lt__glibc.h,
	  libltdl/libltdl/lt__private.h, libltdl/libltdl/lt__strl.h,
	  libltdl/libltdl/lt_dlloader.h, libltdl/libltdl/lt_error.h,
	  libltdl/libltdl/lt_system.h, libltdl/libltdl/slist.h,
	  libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
	  libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
	  libltdl/loaders/loadlibrary.c, libltdl/loaders/preopen.c,
	  libltdl/loaders/shl_load.c, libltdl/lt__alloc.c,
	  libltdl/lt__dirent.c, libltdl/lt__strl.c, libltdl/lt_dlloader.c,
	  libltdl/lt_error.c, libltdl/ltdl.c, libltdl/ltdl.h,
	  libltdl/m4/argz.m4, libltdl/m4/autobuild.m4, libltdl/m4/libtool.m4,
	  libltdl/m4/ltdl.m4, libltdl/m4/ltoptions.m4, libltdl/m4/ltsugar.m4,
	  libltdl/m4/ltversion.in, libltdl/m4/ltversion.m4,
	  libltdl/m4/lt~obsolete.m4, libltdl/slist.c, libltdl/stamp-mk,
	  tools/nut-scanner/Makefile.am, tools/nut-scanner/scan_avahi.c,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c,
	  tools/nut-scanner/scan_xml_http.c: First set of modification to
	  include libltdl

2011-12-05  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, docs/man/snmp-ups.txt, drivers/Makefile.am,
	  drivers/cyberpower-mib.c, drivers/cyberpower-mib.h, drivers/snmp-
	  ups.c: Add Cyber Power Systems with SNMP RMCARD (100, 201, 202 and
	  301) ...  ...to the list of snmp-ups supported models (patch from
	  Eric Schultz)
	* drivers/snmp-ups.c: Remove the Eaton Marlin hook, for base outlet
	  index ...  ...since it has been fixed by a new firmware revision

2011-11-29  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-snmpinfo.py: Fix indentation and use open() instead of
	  file(), to better support Python 3  (Alioth bug #313446, patch from
	  Bohdan Popovych)

2011-11-25  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/nut-ipmi.h: Fix wrong prototype declaration, that was
	  causing a compilation warning  (implicit declaration of function
	  ‘nut_ipmi_get_sensors_status’)

2011-11-24  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/Solaris/pkginfo.in: BASEDIR must also be adapted from
	  configure settings
	* scripts/Solaris/Makefile.am: Add missing dependencies, and
	  distribution rules
	* scripts/Makefile.am: There is no need to list Solaris/pkginfo.in
	  there, ...  ...since 'Solaris' is listed in SUBDIRS, and
	  'pkginfo.in' is listed in configure.in
	* scripts/Solaris/Makefile.am: Remove makelocal.sh from
	  check_SCRIPTS, ...  ...since it is not meant to be run at "make
	  check" time

2011-11-24  Prachi Gandhi <prachi-guest@alioth.debian.org>

	* Makefile.am, configure.in, scripts/Makefile.am,
	  scripts/Solaris/Makefile.am, scripts/Solaris/makelocal.sh,
	  scripts/Solaris/pkginfo.in, scripts/Solaris/prototype: Reverted
	  changes made for Solaris packaging files in [[SVN:3326]] ...  added
	  files in NUT_packaging branch
	* Makefile.am, configure.in, scripts/Makefile.am,
	  scripts/Solaris/Makefile.am, scripts/Solaris/makelocal.sh,
	  scripts/Solaris/pkginfo.in, scripts/Solaris/prototype: Solaris NUT
	  package files added
	* Makefile.am, configure.in, scripts/Makefile.am,
	  scripts/Solaris/Makefile.am, scripts/Solaris/makelocal.sh,
	  scripts/Solaris/pkginfo.in, scripts/Solaris/prototype: Solaris NUT
	  package files added

2011-11-15  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer_usb.c, drivers/usb-common.h: Revert commit
	  [[SVN:2993]] and [[SVN:2994]].  This enables again inclusion of
	  buggy USB Device and Vendor IDs, supported by blazer_usb, in udev
	  rules file (Reported by Stanislav Brabec, from Suse)
	* tools/Makefile.am: Add missing comment

2011-11-12  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-mib.c: Add upsmgBatteryLowCondition OID to the status
	  mapping  (reported by Kiss Gabor (Bitman))

2011-11-11  Praveen Kumar <praveenkumar-guest@alioth.debian.org>

	* scripts/HP-UX/makedepot.sh: script file to create package (depot)
	  for HP-UX

2011-11-08  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/web-layout.conf: Complete search keywords
	* docs/website/web-layout.conf: Final fix for the displaying of the
	  legend, to work on all browsers, ...  ...while still being
	  conforming to W3C validation

2011-11-07  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/web-layout.conf: Fix displaying of the legend

2011-11-05  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* docs/cables.txt, docs/man/apcsmart.txt: apcsmart.txt: minor
	  documentation update  Broken diagram link and 940-0024E cable
	  mention (reported by Jonathan Laventhol).

2011-11-05  Arnaud Quette <arnaud.quette@free.fr>

	* conf/upsd.conf.sample, server/upsd.c: Don't fail to start if at
	  least one of the listening interface is available.  This is needed
	  on systems where either IPv4 or IPv6 is disabled, and no explicit
	  LISTEN directive has been specified (Reported by Pavel Zubkou,
	  Debian bug #598741)

2011-11-02  Praveen Kumar <praveenkumar-guest@alioth.debian.org>

	* configure.in, scripts/HP-UX/nut.psf.in: Adding packaging script for
	  HPUX

2011-10-31  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt, docs/website/news.txt: Publish update jNut 0.2,
	  along with the new jNutWebAPI  (contributed by Emilien Kia, from
	  Eaton)

2011-10-28  Emilien Kia <kiae.dev@gmail.com>

	* scripts/java/README, scripts/java/jNutWebAPI/README,
	  scripts/java/jNutWebAPI/pom.xml,
	  .../jnutwebapi/NutRestProvider.java,
	  .../jnutwebapi/RestWSApplication.java,
	  .../jnutwebapi/ScannerProvider.java,
	  .../jNutWebAPI/src/main/webapp/WEB-INF/web.xml: Initial commit of
	  jNutWebAPI.
	* scripts/java/jNut/.gitignore, scripts/java/jNut/src/main/java/org/n
	  etworkupstools/jnut/Scanner.java: Fix a little bug with function
	  namming (get instead of set).

2011-10-27  Arnaud Quette <arnaud.quette@free.fr>

	* docs/maintainer-guide.txt: Create a basic NUT maintainer guide, ...
	  to start tracking and improving maintenance workflow
	* drivers/bcmxcp_usb.c: Handle disconnection issues and reconnection
	  mechanism  (bug reported by Rich Wrenn)

2011-10-25  Emilien Kia <kiae.dev@gmail.com>

	* .../test/java/org/networkupstools/jnut/ClientTest.java: Add licence
	  information.
	* scripts/java/jNut/README, scripts/java/jNut/pom.xml,
	  .../java/org/networkupstools/jnut/Scanner.java,
	  .../java/org/networkupstools/jnut/ScannerTest.java: Add nut-
	  scanner.

2011-10-25  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Add sanity checks
	* tools/nut-scanner/scan_avahi.c: Remove unused variable

2011-10-25  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: drivers/apcsmart.c: minor correction  Assigning
	  0 directly was wrong (actually, a leftover from earlier version of
	  the code that was removed) - ser_set_speed() prepares the port
	  initially, we only adjust certain options.

2011-10-24  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/man/nut-scanner.txt, tools/nut-scanner/nut-scanner.c: Forgot
	  to document "-q" option (thanks to Emilien Kia for reporting this)

2011-10-21  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: Trivial layout consistency
	* docs/man/nut-scanner.txt: Update man page with -V and -a option
	* tools/nut-scanner/nut-scanner.c: Add an option to display available
	  bus (usefull for wrapper).
	* tools/nut-scanner/nut-scanner.c: return -1 on bad command line
	  option

2011-10-19  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-ip.c: Fix crash on 32bits systems
	* tools/nut-scanner/nut-scanner.c: Add a switch to display NUT
	  version.

2011-10-19  Charles Lepple <clepple+nut@gmail.com>

	* docs/FAQ.txt: Add FAQ entry for LISTEN directive

2011-10-18  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/eaton-mib.c: Fix outlets reported current, ...  ...which
	  were off by 100 in aphel_genesisII MIB, and bump MIB version to
	  0.46 (patch from Sven Nilsson)

2011-10-14  Arnaud Quette <arnaud.quette@free.fr>

	* docs/Makefile.am, docs/images/nut-logo.png, docs/images/nut.svg,
	  docs/website/Makefile.am, docs/website/css/web-layout.css,
	  docs/website/faviconut.ico, docs/website/faviconut.png,
	  docs/website/web-layout.conf: Add the new NUT logo (contributed by
	  Luc Descotils, from Eaton)
	* docs/website/web-layout.conf: Fix another W3C validator error
	  (there is no attribute "language" anymore for <script> in XHTML
	  1.1)
	* data/driver.list.in: Remove redundant entry, that probably causes a
	  W3C validator error (end tag for "tr" which is not finished)
	* tools/Makefile.am: Only generate static and JSON HCL if we can
	  import json, ...  ...simplejson and lxml Python modules
	* docs/Makefile.am: Remove the user manual dependency on static HCL,
	  which broke Buildbot
	* configure.in, docs/Makefile.am, docs/download.txt,
	  docs/website/Makefile.am: Automate generation of the version
	  release information, in the Download section.  This is a rewritten
	  version of [[SVN:3272]], this time using Asciidoc mechanism instead
	  of Autoconf
	* Makefile.am, docs/Makefile.am, tools/Makefile.am, tools/nut-
	  hclinfo.py: Add static HCL as a user manual dependency, along with
	  the needed build rules

2011-10-14  Charles Lepple <clepple+nut@gmail.com>

	* include/Makefile.am: nut_version.h: grab Git revision, if any

2011-10-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/configure.txt: Add missing --with-avahi documentation
	* docs/Makefile.am, docs/developer-guide.txt, tools/nut-
	  scanner/.gitignore, tools/nut-scanner/README, tools/nut-
	  scanner/nut-scan.h: Add a 'NUT device discovery' chapter to the
	  developer guide, ...  ...to document libnutscan
	* configure.in: Enable Avahi automatic support, upon detection
	* docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
	  docs/man/nutscan.txt: Add an overview manpage for libnutscan
	* configure.in, docs/Makefile.am, docs/{download.txt.in =>
	  download.txt}: Revert [[SVN:3272]], which breaks distribution
	  check, ...  ...while waiting for a suitable solution

2011-10-13  Charles Lepple <clepple+nut@gmail.com>

	* docs/man/nut-scanner.txt: nut-scanner.txt: spelling and style edits

2011-10-13  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/man/nut-scanner.txt: Add examples to nut-scanner man page

2011-10-12  Arnaud Quette <arnaud.quette@free.fr>

	* docs/.gitignore: Mark download.txt as ignored, ...  ...since it is
	  now generated automatically (no functional changes)

2011-10-11  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, docs/Makefile.am, docs/{download.txt =>
	  download.txt.in}: Automate generation of the stable release
	  information, in the Download section

2011-10-10  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/nut-libfreeipmi.c, tools/nut-scanner/scan_avahi.c: Replace
	  <time.h> inclusion by "timehead.h", as per NUT coding standard
	  (Reported by Prachi Gandhi, from Eaton)

2011-10-10  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/man/nut-scanner.txt, tools/nut-scanner/nut-scanner.c: Add CIDR
	  option manual

2011-10-10  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/upower/95-upower-hid.rules: Update upower script with
	  Powercom entry
	* docs/website/projects.txt: Advertise more the official Windows
	  port, with regard to WinNUT
	* Makefile.am: Force ChangeLog regeneration upon make dist, ...
	  ...in case it has already been generated previously

2011-10-06  Charles Lepple <clepple+nut@gmail.com>

	* docs/support.txt: Reduce recommended debug level from 5 to 2 in
	  Support page.

2011-10-05  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/powercom-hid.c: Add Powercom BNT-xxxAP
	  (productID 0004)...  ...to the list of usbhid-ups supported models
	  (reported by Virus, on Ubuntu Launchpad)

2011-09-30  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add Belkin F6S600auUSB to the list of
	  blazer_usb supported models  (reported by Simon Dwyer)

2011-09-26  Arnaud Quette <arnaud.quette@free.fr>

	* conf/upsd.conf.sample: Complete LISTEN information, with regard to
	  IP v4 or v6 disabled kernel  (reported by Pavel Zubkou, Debian bug
	  #598741)
	* clients/Makefile.am: Fix forgotten update of libupsclient version
	  information  (bump from 1:0:0 to 2:0:1)
	* docs/man/bcmxcp.txt, docs/man/blazer.txt, docs/man/dummy-ups.txt:
	  Fix spelling and typo errors (patch from Laurent Bigonville,
	  Debian)
	* tools/nut-scanner/scan_xml_http.c: Fix remaining compilation errors
	  on FreeBSD, ...  ...due to missing <netinet/in.h> header inclusion

2011-09-26  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-ip.c: Remove AI_NUMERICSERV...  ...since
	  it's useless and produces compile error on some systems.
	* tools/nut-scanner/nutscan-ip.h: Try to fix FreeBSD build

2011-09-23  Arnaud Quette <arnaud.quette@free.fr>

	* docs/config-notes.txt: Add a note on nut-scanner availability
	* docs/.gitignore: Mark some forgotten generated HTML files as
	  ignored files  (no functional changes)
	* docs/Makefile.am, docs/developer-guide.txt, docs/new-clients.txt,
	  lib/README: Complete lib/README and convert it to Asciidoc, ...
	  ...as 'Appendix B: NUT libraries complementary information'
	* configure.in, docs/macros.txt, docs/man/Makefile.am,
	  docs/website/Makefile.am, drivers/Makefile.am,
	  m4/nut_check_libfreeipmi.m4, m4/nut_check_libwrap.m4,
	  m4/nut_report_feature.m4, tools/nut-scanner/Makefile.am, tools/nut-
	  scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c, tools/nut-
	  scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c: Rework the whole
	  HAVE_<FEATURE> versus WITH_<FEATURE> logic, ...  ...which is not
	  suitable anymore since nut-scanner. Previously, we only defined an
	  automake variable (AM_CONDITIONAL) that allowed to compile coherent
	  set of features (a specific driver, for example). With nut-scanner,
	  we also need a pre-processor macro (AC_DEFINE) to manage code
	  activation inside of a feature. The NUT_REPORT_FEATURE macro has
	  been modified to handle all this logic

2011-09-23  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h,
	  tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_xml_http.c:
	  Replace calls to inet_* functions by equivalent getaddrinfo and
	  getnameinfo...  ...for portability

2011-09-22  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: Move a pthread variable to a
	  #ifdef HAVE_PTHREAD section.

2011-09-20  Arnaud Quette <arnaud.quette@free.fr>

	* server/Makefile.am, server/netcmds.h, server/netget.c,
	  server/netget.h, server/netinstcmd.c, server/netinstcmd.h,
	  server/netlist.c, server/netlist.h, server/netmisc.c,
	  server/netmisc.h, server/netset.c, server/netset.h,
	  server/netuser.c, server/netuser.h, server/{ctype.h =>
	  nut_ctype.h}, server/ssl.c, server/ssl.h, server/upsd.c,
	  server/upsd.h: Rename upsd internal client structure and header
	  from ctype_t to nut_ctype_t.  This avoids namespace conflict on
	  AIX, and is more suitable in general

2011-09-18  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/nutupsdrv.txt: Add the missing '-q' option (closes Alitoth
	  patch #301145)
	* tools/nut-scanner/Makefile.am: Distribute the needed headers for
	  libnutscan
	* configure.in, lib/.gitignore, lib/Makefile.am,
	  lib/libnutscan.pc.in: Add pkg-config support for libnutscan
	* common/Makefile.am: Remove extraneous space

2011-09-17  Arnaud Quette <arnaud.quette@free.fr>

	* docs/developer-guide.txt, docs/man/dummy-ups.txt: Complete device
	  simulation and recording information
	* docs/man/index.txt: Add nut-scanner and libnutscan entries to the
	  manual pages index
	* docs/man/.gitignore: Mark some more generated HTML files as ignored
	  files  (no functional changes)

2011-09-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Add the missing SHA-256 sum on the Download page
	  / section  (need to be generated after the distribution package)
	* drivers/nut-ipmipsu.c, drivers/nut-libfreeipmi.c: Don't override
	  PSU absence with the power failure flag
	* NEWS, UPGRADING, configure.in, docs/download.txt,
	  docs/website/news.txt: Final update for 2.6.2 release
	* docs/configure.txt: Complete the minimum FreeIPMI version required
	* tools/nut-scanner/.gitignore: Mark remaining generated files as
	  ignored files  (no functional changes)

2011-09-15  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_nut.c: Conditional inclusion of pthread.h
	* tools/nut-scanner/nut-scanner.c, tools/nut-scanner/nutscan-
	  display.c, tools/nut-scanner/scan_avahi.c, tools/nut-
	  scanner/scan_ipmi.c, tools/nut-scanner/scan_nut.c, tools/nut-
	  scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: config.h is
	  included in common.h, so only include common.h
	* include/parseconf.h: We need stdio.h because we use FILE type.

2011-09-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/.gitignore: Mark remaining generated manual pages as
	  ignored files  (no functional changes)
	* docs/man/nut-ipmipsu.txt, drivers/nut-ipmi.h, drivers/nut-
	  ipmipsu.c, drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4:
	  Complete nut-ipmipsu, by adding sensors discovery and monitoring

2011-09-14  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Remove use of strndup. This is not
	  supported on Solaris.

2011-09-14  Charles Lepple <clepple+nut@gmail.com>

	* tools/nut-scanner/scan_snmp.c: Remove unbalanced #endif
	* tools/nut-scanner/scan_snmp.c: nut-scanner: use "common.h", which
	  includes "config.h"
	* tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c:
	  Include <string.h> for nut-scanner
	* tools/nut-scanner/scan_snmp.c: Silence redefined PACKAGE_ macro
	  warnings  This should be fixed properly upstream, but in the mean
	  time, the SNMP-based tools can't use these macros properly (since
	  they will have the values for Net-SNMP, not NUT).

2011-09-14  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-ip.c: Get rid of s6_addr32 in IPv6 code
	  since it is implementation specific.  Replaced by s6_addr. (thanks
	  to Charles Lepple)

2011-09-14  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/.gitignore: Mark apcsmart-old binary as ignored file (no
	  functional changes)

2011-09-14  Emilien Kia <kiae.dev@gmail.com>

	*
	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Client.jav
	  a, scripts/java/jNut/src/main/java/org/networkupstools/jnut/Command
	  .java, scripts/java/jNut/src/main/java/org/networkupstools/jnut/Dev
	  ice.java, .../java/jNut/src/main/java/org/networkupstools/jnut/NutE
	  xception.java, .../jNut/src/main/java/org/networkupstools/jnut/Stri
	  ngLineSocket.java, scripts/java/jNut/src/main/java/org/networkupsto
	  ols/jnut/Variable.java: Fix mail address typo for javadoc.

2011-09-13  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/Makefile.am: Fix make distcheck-light

2011-09-13  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp.c: Fix compilation warning on values comparison
	  being always false
	* configure.in, tools/nut-scanner/nut-scanner.c: Complete commit
	  [[SVN:3218]], to address getopt_long too
	* configure.in: Do a second check to ensure inclusion of getopt.h, in
	  case optind is known
	* drivers/bcmxcp.c, drivers/bcmxcp.h, drivers/bcmxcp_ser.c: Add
	  support for outlet.n.delay.{start,shutdown}, ...  ...and use
	  outlet.n.delay.shutdown for outlet.n.shutdown.return instead of the
	  default 3 seconds (patch from Rich Wrenn)

2011-09-13  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-ip.c: Do not use long long variable
	  anymore
	* tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_nut.c:
	  Remove all calls to asprintf

2011-09-12  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* docs/FAQ.txt, docs/config-notes.txt, docs/download.txt,
	  docs/man/Makefile.am, docs/man/apcsmart-old.txt,
	  docs/man/apcsmart.txt, docs/stable-hcl.txt, docs/website/web-
	  layout.conf, drivers/Makefile.am, drivers/apcsmart-old.c,
	  drivers/apcsmart-old.h, drivers/apcsmart.c, drivers/apcsmart.h,
	  drivers/apcsmart_tabs.c, drivers/apcsmart_tabs.h, drivers/eaton-
	  mib.c, drivers/eaton-mib.h, drivers/snmp-ups.c: Merge with trunk
	  from [[SVN:3196]]
	* docs/man/Makefile.am, docs/man/nut-scanner.txt,
	  docs/man/nutscan_add_device_to_device.txt,
	  docs/man/nutscan_add_option_to_device.txt,
	  docs/man/nutscan_cidr_to_ip.txt,
	  docs/man/nutscan_display_parsable.txt,
	  docs/man/nutscan_display_ups_conf.txt,
	  docs/man/nutscan_free_device.txt, docs/man/nutscan_new_device.txt,
	  docs/man/nutscan_scan_avahi.txt, docs/man/nutscan_scan_ipmi.txt,
	  docs/man/nutscan_scan_nut.txt, docs/man/nutscan_scan_snmp.txt,
	  docs/man/nutscan_scan_usb.txt, docs/man/nutscan_scan_xml_http.txt:
	  Add man pages

2011-09-12  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/Makefile.am: apcsmart: minor Makefile.am change  Add
	  missing apcsmart_tabs.h
	* drivers/apcsmart.c: apcsmart: limit comm-lost spam  In
	  upsdrv_updateinfo(), additional comm-lost messages were logged,
	  potentially causing unnecessary spam in logs. As ser_comm_fail()
	  and ser_comm_good() functions do so themselves (including rate
	  limiting), we changed the superfluous info to debug level and also
	  switched to upsdebugx().
	* drivers/apcsmart.h: apcsmart: add '+' to APC_UNR_CMDS  Only '-' is
	  used, and only internally by the driver - no need to inform in logs
	  about unrecognized command.
	* docs/man/apcsmart.txt: apcsmart: minor updates to apcsmart man page

2011-09-12  Charles Lepple <clepple+nut@gmail.com>

	* docs/FAQ.txt: Reword rewording in FAQ

2011-09-09  Arnaud Quette <arnaud.quette@free.fr>

	* docs/FAQ.txt: Fix wording, that is not appropriate anymore
	* docs/config-notes.txt: Complete shutdown information on the
	  "critical UPS" notion
	* docs/download.txt: Add missing comma for OpenWrt
	* docs/stable-hcl.txt: Complete information for reporting new device
	* drivers/eaton-mib.c, drivers/eaton-mib.h, drivers/snmp-ups.c: Add a
	  missing Eaton MIB for PDU

2011-09-09  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c, tools/nut-snmpinfo.py: Use the
	  SysOID registered in drivers's sources...  ...to detect the
	  favorite MIB for SNMP devices. Fall back to old method if no
	  matching SysOID is found.

2011-09-08  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Forgotten commit for the new updated Windows
	  package
	* docs/website/web-layout.conf: Fix XHTML 1.1 compliance (reported by
	  W3C validators)

2011-09-08  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_avahi.c: Add a timeout to scan-avahi
	  function

2011-09-08  Arnaud Quette <arnaud.quette@free.fr>

	* .gitignore, configure.in, m4/nut_check_os.m4, scripts/Makefile.am,
	  scripts/README, scripts/systemd/.gitignore,
	  scripts/systemd/Makefile.am, scripts/systemd/README,
	  scripts/systemd/nut-driver.service.in, scripts/systemd/nut-
	  monitor.service.in, scripts/systemd/nut-server.service.in,
	  scripts/systemd/nutshutdown.in: Add initial support for systemd
	  (patch from Michal Hlavinka)

2011-09-06  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* configure.in, docs/download.txt, docs/new-clients.txt,
	  docs/website/news.txt, docs/website/projects.txt, drivers/apc-
	  mib.c, drivers/bestpower-mib.c, drivers/eaton-mib.c, drivers/ietf-
	  mib.c, drivers/mge-hid.c, drivers/mge-mib.c, drivers/netvision-
	  mib.c, drivers/powerware-mib.c, drivers/raritan-pdu-mib.c,
	  drivers/snmp-ups.c, drivers/snmp-ups.h, scripts/Makefile.am,
	  scripts/README, scripts/java/Makefile.am, scripts/java/README,
	  scripts/java/jNut/README, scripts/java/jNut/pom.xml,
	  .../main/java/org/networkupstools/jnut/Client.java,
	  .../java/org/networkupstools/jnut/Command.java,
	  .../main/java/org/networkupstools/jnut/Device.java,
	  .../org/networkupstools/jnut/NutException.java,
	  .../org/networkupstools/jnut/StringLineSocket.java,
	  .../java/org/networkupstools/jnut/Variable.java,
	  .../java/org/networkupstools/jnut/ClientTest.java,
	  scripts/java/jNutList/README, scripts/java/jNutList/pom.xml,
	  .../java/org/networkupstools/jnutlist/AppList.java: Merge from
	  trunk [[SVN:3177]]

2011-09-06  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/apc-mib.c, drivers/bestpower-mib.c, drivers/eaton-mib.c,
	  drivers/ietf-mib.c, drivers/mge-mib.c, drivers/netvision-mib.c,
	  drivers/powerware-mib.c, drivers/raritan-pdu-mib.c, drivers/snmp-
	  ups.c, drivers/snmp-ups.h: Add a new initialization method, that
	  uses sysObjectID  (indirection to the main MIB of the device) to
	  detect supported devices. This speeds up even more init stage and
	  should render void the use of 'mib' option
	* drivers/snmp-ups.c: Force numeric OIDs resolution, ie do not
	  resolve to textual names.  This is mostly for the convenience of
	  debug output

2011-09-05  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_ipmi.c: typo
	* tools/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_xml_http.c:
	  More conditional compilation fixes
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_ipmi.c: use HAVE_FREEIPMI_FREEIPMI_H instead
	  of non existing WITH_IPMI
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_ipmi.c: Prepare IPMI integration. Fix
	  conditional compilation
	* tools/nut-scanner/scan_snmp.c: Fix no thread compilation
	* tools/nut-scanner/nut-scanner.c: Raise default timeout from 1s to
	  5s. Use parallel scanning.

2011-09-05  Arnaud Quette <arnaud.quette@free.fr>

	* scripts/java/Makefile.am,
	  .../java/org/networkupstools/jnuttest/AppTest.java: Remove test
	  code, since it is bound to jNut and not jNutList (reported by
	  Emilien Kia)
	* drivers/mge-hid.c: Add support for battery.runtime.low, and end of
	  battery life (life cycle monitoring) ; along with measurements
	  (outlet power factor, power, real power and current) for 5 PX
	* configure.in, scripts/Makefile.am, scripts/java/.gitignore,
	  scripts/java/Makefile.am: Complete jNut automake integration
	  (distribution rules)

2011-09-03  Arnaud Quette <arnaud.quette@free.fr>

	* docs/man/.gitignore: Mark nut-ipmipsu.html as ignored file (no
	  functional changes)

2011-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* docs/new-clients.txt: Fix jNut Asciidoc integration
	* docs/download.txt, docs/new-clients.txt, docs/website/news.txt,
	  scripts/README, scripts/java/README, scripts/java/jNut/README,
	  scripts/java/jNutList/README: Integrate jNUT information in the
	  developer guide, ...  along with news and download section
	* docs/website/news.txt: Add the Beta NUT 2.6.1-1 package for
	  Windows, and some news history (just intended for VCS history)
	* docs/website/projects.txt: Formatting fixes

2011-09-02  Emilien Kia <kiae.dev@gmail.com>

	* scripts/java/README, scripts/java/jNut/README,
	  scripts/java/jNut/pom.xml,
	  .../main/java/org/networkupstools/jnut/Client.java,
	  .../java/org/networkupstools/jnut/Command.java,
	  .../main/java/org/networkupstools/jnut/Device.java,
	  .../org/networkupstools/jnut/NutException.java,
	  .../org/networkupstools/jnut/StringLineSocket.java,
	  .../java/org/networkupstools/jnut/Variable.java,
	  .../java/org/networkupstools/jnut/ClientTest.java,
	  scripts/java/jNutList/README, scripts/java/jNutList/pom.xml,
	  .../java/org/networkupstools/jnutlist/AppList.java,
	  .../java/org/networkupstools/jnuttest/AppTest.java: Add jNut (NUT
	  client in Java) to trunk.

2011-09-02  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Make sure SNMP strings are NULL
	  terminated
	* configure.in: Forgot to resolve a conflict with previous merge
	* MAINTAINERS, NEWS, UPGRADING, clients/upssched.c, common/common.c,
	  data/cmdvartab, data/driver.list.in, docs/FAQ.txt,
	  docs/acknowledgements.txt, docs/configure.txt, docs/download.txt,
	  docs/features.txt, docs/images/advanced.png,
	  docs/images/bigbox.png, docs/images/bizarre.png,
	  docs/images/simple.png, docs/man/Makefile.am, docs/man/blazer.txt,
	  docs/man/nut-ipmipsu.txt, docs/man/powercom.txt, docs/nut-
	  names.txt, docs/stable-hcl.txt, docs/website/Makefile.am,
	  docs/website/news.txt, docs/website/projects.txt, docs/website/web-
	  layout.conf, drivers/Makefile.am, drivers/apcsmart.c,
	  drivers/apcsmart.h, drivers/bcmxcp.c, drivers/bcmxcp_ser.c,
	  drivers/bcmxcp_usb.c, drivers/bestfcom.c, drivers/blazer.c,
	  drivers/blazer_usb.c, drivers/cps-hid.c, drivers/dstate.c,
	  drivers/libhid.c, drivers/liebert-esp2.c, drivers/liebert-hid.c,
	  drivers/main.c, drivers/mge-hid.c, drivers/mge-utalk.c,
	  drivers/microdowell.c, drivers/nut-ipmi.h, drivers/nut-ipmipsu.c,
	  drivers/nut-libfreeipmi.c, drivers/powercom.c, drivers/powercom.h,
	  drivers/rhino.c, drivers/snmp-ups.c, drivers/solis.c, drivers/usb-
	  common.c, drivers/usb-common.h, include/Makefile.am,
	  lib/libupsclient-config.in, lib/libupsclient.pc.in,
	  m4/ax_create_stdint_h.m4, m4/nut_check_libfreeipmi.m4,
	  m4/nut_report_feature.m4, scripts/Makefile.am,
	  scripts/augeas/README, scripts/avahi/nut.service.in,
	  scripts/udev/Makefile.am, scripts/udev/README, scripts/udev/nut-
	  ipmipsu.rules.in, scripts/upower/95-upower-hid.rules,
	  server/netinstcmd.c, server/netlist.c, server/upsd.c, tools/git-
	  svn.authors, tools/nut-usbinfo.pl, tools/svn2cl.authors: Merge from
	  rev [[SVN:2911]]

2011-09-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/main.c: Remove extraneous empty line

2011-08-31  Emilien Kia <kiae.dev@gmail.com>

	* drivers/usb-common.c: Fix pointer check on wrong variable (Patch
	  from Thomas Jarosch)
	* drivers/mge-utalk.c: Fix use of uninitialized variable (Patch from
	  Thomas Jarosch)
	* common/common.c: Fix file descriptor leak (Patch from Thomas
	  Jarosch)

2011-08-31  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_snmp.c: More API cleaning
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nutscan-ip.c,
	  tools/nut-scanner/nutscan-ip.h, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c: Consolidating API
	* configure.in, m4/nut_check_libavahi.m4, tools/nut-
	  scanner/Makefile.am, tools/nut-scanner/nut-scan.h, tools/nut-
	  scanner/nut-scanner.c, tools/nut-scanner/scan_avahi.c: Add avahi
	  scanning
	* tools/nut-scanner/scan_nut.c: Make scan_nut reentrant

2011-08-30  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcsmart: revert back from custom serial
	  functions to serial.c ones  Following Arjen's suggestion, this
	  patch reverts the apcsmart back to relying on serial.c functions
	  for opening/closing and setting speed.  For the reference:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2011-June/005491.html  If it turns out that re-opening
	  serial ports during normal driver activity is really necessary, it
	  can be easily added to serial.c.
	* drivers/apcsmart.c: Fix alignment of preprocessor directives

2011-08-29  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Add region/country management, ...  ...to
	  improve features provided such as 'output.voltage.nominal' and 3S
	  Eco control
	* data/driver.list.in, drivers/mge-hid.c: Add Eaton 3S to the list of
	  usbhid-ups supported models

2011-08-29  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nutscan-display.c: Make sure device names are
	  unique for "nut.conf style" display
	* tools/nut-scanner/nut-scanner.c: Add a "quiet" option

2011-08-25  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Fix duplication

2011-08-24  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/nutscan-device.h, tools/nut-scanner/nutscan-
	  display.c: Add parsable output

2011-08-20  Charles Lepple <clepple+nut@gmail.com>

	* m4/nut_report_feature.m4: Avoid implementation-specific use of
	  "echo" in autoconf
	  http://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html

2011-08-18  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_xml_http.c: Remove useless "" for desc

2011-08-16  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/.gitignore, tools/nut-scanner/Makefile.am,
	  tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/{device.c => nutscan-device.c}, tools/nut-
	  scanner/{device.h => nutscan-device.h}, tools/nut-
	  scanner/{display.c => nutscan-display.c}, tools/nut-scanner/{ip.c
	  => nutscan-ip.c}, tools/nut-scanner/{ip.h => nutscan-ip.h},
	  tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c,
	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  More consistent API naming

2011-08-05  Charles Lepple <clepple+nut@gmail.com>

	* configure.in: configure.in: minor changes to output  * Capitalized
	  "UPS" * --with-drivers= : Only *build* specific drivers

2011-07-30  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add Cyber Power Systems CP1000AVRLCD to the
	  list of usbhid-ups supported models  (reported by David C. Rankin)

2011-07-28  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-usbinfo.pl: Proper fix to [[SVN:3012]], which satisfies
	  both udev and upower

2011-07-27  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-usbinfo.pl: Partially revert [[SVN:3012]].  It caused a
	  udev regression, with several missing USB IDs (thanks to Pawel
	  Sikora for uncovering it)
	* scripts/augeas/README: Add a complete Python Augeas example code

2011-07-26  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, docs/man/nut-ipmipsu.txt, scripts/udev/.gitignore,
	  scripts/udev/Makefile.am, scripts/udev/README, scripts/udev/nut-
	  ipmipsu.rules.in: Add udev rules file and documentation for nut-
	  ipmipsu
	* m4/nut_check_libfreeipmi.m4: Improve detection of the needed
	  functions
	* data/driver.list.in: Add Orvaldi 750 / 900SP to the list of
	  blazer_usb supported models  (reported by Pawel Sikora)
	* drivers/nut-ipmipsu.c: Fix missing comment closure, add a TODO list
	  and remove unused variables

2011-07-21  Charles Lepple <clepple+nut@gmail.com>

	* tools/git-svn.authors: Added authors file for git-svn
	  synchronization

2011-07-19  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add POWEREX VI 1000 LED to the list of
	  blazer_usb supported models  (reported by Sergey Talchuk)

2011-07-17  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add SVEN Power Pro+ series (USB ID
	  ffff:0000)...  ...to the list of blazer_usb supported models
	  (reported by Vlad)

2011-07-16  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Fix --with-[free]ipmi configure option...  ...so that
	  it actually behave correctly in automatic detection mode

2011-07-14  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in: Fix the typo that made its way into commit
	  [[SVN:3136]], and broke configure
	* configure.in, docs/configure.txt, docs/man/.gitignore,
	  docs/man/Makefile.am, docs/man/nut-ipmipsu.txt, drivers/.gitignore,
	  drivers/Makefile.am, drivers/nut-ipmi.h, drivers/nut-ipmipsu.c,
	  drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4: First
	  attempt to create a driver to monitor power supply units using
	  IPMI.  This preliminary version only reads FRU (Field Replace Unit)
	  information, but not yet the sensor information (describing if the
	  PSU is present and online), and includes base documentation
	  (manpage and configure options). It currently supports GNU
	  FreeIPMI, but uses an abstract IPMI implementation that will allow
	  to use other IPMI toolkits

2011-07-13  Arnaud Quette <arnaud.quette@free.fr>

	* docs/configure.txt: Move several misplaced options to the right
	  sections
	* tools/Makefile.am: Finally fix both distribution and compilation
	  rules, ...  ...completing commit [[SVN:3121]]
	* tools/nut-scanner/Makefile.am: Force building automatically
	  generated files before any target
	* drivers/bestfcom.c: Remove unused variables (patch from Regid
	  Ichira, Debian bug #633756)

2011-07-12  Arnaud Quette <arnaud.quette@free.fr>

	* MAINTAINERS: Update the corporate mail address and some details

2011-07-08  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/ip.c, tools/nut-scanner/ip.h, tools/nut-
	  scanner/nut-scanner.c: Add an helper function to decode CIDR
	  notation.

2011-07-08  Charles Lepple <clepple+nut@gmail.com>

	* docs/acknowledgements.txt: Fix typo in link on Acknowledgements
	  page

2011-07-07  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Make sure the description string
	  ends with a 0

2011-07-07  Arnaud Quette <arnaud.quette@free.fr>

	* docs/acknowledgements.txt: Move Arjen de Korte, NUT Senior
	  lieutenant, to the Retired members section.  Thanks for all his
	  years of dedication to make NUT better

2011-07-06  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: help and CLI modified depending on
	  what is available at compile time
	* tools/nut-scanner/scan_nut.c: Remove redundant quote in scan_nut
	* configure.in, tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-
	  scanner.c: Conditional compilation of neon related code (thanks to
	  Arnaud Quette)
	* tools/nut-scanner/nut-scanner.c: Add switches to select the desired
	  buses
	* tools/nut-scanner/display.c, tools/nut-scanner/scan_snmp.c: Display
	  everything as: varname<space>=<space>"value"

2011-07-05  Arnaud Quette <arnaud.quette@free.fr>

	* tools/Makefile.am, tools/nut-scanner/Makefile.am: Fix distribution
	  and compilation rules, ...  ...to suit general needs and nut-
	  scanner specific requirements

2011-07-04  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_nut.c: Add timeout to scan_nut
	* tools/nut-scanner/scan_snmp.c: Remove unused variable
	* clients/upsclient.c, clients/upsclient.h: Add upscli_tryconnect
	  function which is upscli_connect function...  ...with the control
	  of the connect timeout.

2011-07-01  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* MAINTAINERS: It's been fun, but I feel the time has come to say
	  farewell. All the best...

2011-06-29  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, scripts/Makefile.am, scripts/avahi/.gitignore,
	  scripts/avahi/nut.service.in: Add Avahi support for NUT mDNS
	  publication, using a static service file
	* tools/svn2cl.authors: Add missing committers, and reorder using the
	  Project Member List:
	  https://alioth.debian.org/project/memberlist.php?group_id=30602

2011-06-28  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add various models equipped with APC AP9618
	  management card, ...  ...including APC Smart-UPS RT XL, to the list
	  of snmp-ups supported models (reported by Angela Williams)

2011-06-28  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: remove SER_D6, as
	  it's implied by SER_{CS,CC} flags...  ...and has no use otherwise
	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c:
	  apcsmart: fix conditions in instcmd(); use regex for format
	  validation
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: fix
	  apc_write_rep() and apc_write_long() behaviour -  ...we can't
	  assume that the command will succeed and keep sending the rest of
	  the sequence
	* drivers/apcsmart.c: apcsmart: comments, code shuffling
	* drivers/apcsmart.c: apcsmart: minor changes
	* drivers/apcsmart.c: apcsmart: *qco fix
	* drivers/apcsmart.c: apcsmart: follow dev guide more closely
	* drivers/apcsmart.c: apcsmart: add parameter to smartmode()
	* docs/man/apcsmart.txt: apcsmart: manpage update
	* drivers/apcsmart.c: apcsmart: apc_read() adjustment
	* drivers/apcsmart.c: apcsmart: use slightly adjusted older
	  smartmode() version
	* drivers/apcsmart.c: apcsmart: apc_flush() fix
	* drivers/apcsmart.c: apcsmart: remove some of the old commented out
	  sections
	* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c:
	  apcsmart: trivial changes
	* drivers/apcsmart.c: apcsmart: add a few apc_flush() calls
	* drivers/apcsmart.c: apcsmart: sanitize sdtype (and other vars) in
	  upsdrv_initups()
	* drivers/apcsmart.c: apcsmart: update oldapcsetup()
	* drivers/apcsmart.c: apcsmart: allow ^Z to timeout
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: update detection
	  code, add command set regex
	* drivers/apcsmart.c: apcsmart: sdcmd_AT() fix
	* drivers/apcsmart.c: apcsmart: add regex matching of variable result
	  to verify, ...  ...if it actually makes sense
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: add typical
	  buffer length defines
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: change how SER_*
	  flags are handled
	* drivers/apcsmart.c: apcsmart: trivial changes
	* drivers/apcsmart.c: apcsmart: rename wugrace -> awd
	* drivers/apcsmart.c: apcsmart: bugfixes
	* drivers/apcsmart.c, drivers/apcsmart_tabs.c,
	  drivers/apcsmart_tabs.h: apcsmart: updates to instand commands
	  (inc. shutdown commands), ...  ...enabled handling of ext paramater
	  for subcommands
	* drivers/apcsmart.c: apcsmart: apc_ser_tear() fixup
	* drivers/apcsmart.c: apcsmart: small sdcmd_Z() fix
	* drivers/Makefile.am, drivers/apcsmart.c, drivers/apcsmart.h,
	  drivers/apcsmart_tabs.c, drivers/apcsmart_tabs.h: apcsmart:
	  cleanups, split into two files
	* drivers/apcsmart.c: apcsmart: next changes to instcmd stuff
	* drivers/apcsmart.c: apcsmart: simplify query_ups()
	* drivers/apcsmart.c: apcsmart: add apc_write_rep() and
	  apc_write_long(), ...  ...initial changes to instcmd stuff
	* drivers/apcsmart.c: apcsmart: allow tearing down/setting up serial
	  connection...  ...during normal activity; changes should fix
	  #535583 as well
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: trivial changes
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: enable icanon
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: handle 1:n vars
	  (nut:apc) variables, ...  ...so we don't need tricks such as
	  ups.firmware.old
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: reintroduce
	  ignored set in protocol_verify() ...  ...for not exposed cmds/vars
	  (=> a bit more quiet logs)
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: introduce icanon
	  upsread() and upsflush()  (functions will be used after 'icanon'
	  commit)
	* drivers/apcsmart.h: apcsmart: add quick reference about alerts and
	  to-be-removed defines.  Introduce SER_* defines what will be used
	  in new functions.
	* drivers/apcsmart.h: apcsmart: add command '@' to compatibility
	  tables.
	* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: trivial changes
	* drivers/apcsmart.c: apcsmart: fix convert_data() ...  ...we can't
	  assume that argument passed is global or static, so we can't just
	  return it as is

2011-06-27  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/device.h, tools/nut-scanner/nut-scan.h,
	  tools/nut-scanner/nut-scanner.c, tools/nut-scanner/scan_nut.c,
	  tools/nut-scanner/scan_snmp.c: Add NUT server scan.

2011-06-22  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/Makefile.am: Fix "make distcheck-light"
	* tools/nut-scanner/scan_snmp.c: Correct way to fix snmp device name
	  (by Arjen de Korte)

2011-06-21  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_xml_http.c: Use NUT const
	* tools/nut-scanner/ip.c, tools/nut-scanner/ip.h: Forgot to commit
	  the new files for iterator
	* tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scan.h,
	  tools/nut-scanner/scan_snmp.c: Factorize IP iterator
	* tools/nut-scanner/Makefile.am: Remove unneeded reference to *.h
	  files
	* tools/Makefile.am, tools/nut-scanner/nutscan-snmp.h, tools/nut-
	  snmpinfo.py: Add python script to generate nutscan-snmp.h at "make
	  dist" time
	* tools/nut-scanner/scan_snmp.c: End of snmp device name fix started
	  in previous commit ...  ...([[SVN:3048]] was commited too early on
	  my mistake).
	* tools/nut-scanner/nutscan-snmp.h, tools/nut-scanner/scan_snmp.c:
	  [[Commit comment was empty.]]

2011-06-17  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* docs/man/blazer.txt, drivers/blazer.c: Add preselection of
	  communication protocol used

2011-06-16  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_xml_http.c: Add "desc" option to xml_http
	  devices
	* drivers/snmp-ups.c: Fix SNMP v3 session initialisation
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_snmp.c: Add SNMP v3

2011-06-15  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_snmp.c: Add "community" switch for SNMP v1
	* tools/nut-scanner/scan_snmp.c: Add IPv6 to SNMP scan
	* configure.in: Detecting pthread availability (by Arnaud Quette)

2011-06-14  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_snmp.c: Add threads optimisation to SNMP
	* tools/nut-scanner/nut-scanner.c: Update command line help
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/nutscan-snmp.h, tools/nut-scanner/scan_snmp.c:
	  Add SNMP IPv4 discovery

2011-06-08  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/web-layout.conf: Update the Firefox download button,
	  since the previous one has disappeared
	* docs/website/news.txt, docs/website/projects.txt: Add a news entry,
	  and a reference in the Related projects, ...  ...on Dell PowerVault
	  NX3500, which uses NUT for power protection (approved by Dell)

2011-06-08  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/nut-scanner.c: Adding command line parameters
	  managment

2011-06-07  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c:
	  Clean up + check 80 column wide
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_xml_http.c: Timeout is passed in argument to
	  scan_xml_http
	* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
	  tools/nut-scanner/scan_xml_http.c: Enable XML/HTTP scanning
	* tools/nut-scanner/scan_usb.c: Use the add_device_to_device function
	* tools/nut-scanner/device.c, tools/nut-scanner/device.h: Add a
	  function to join two device

2011-06-06  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* tools/nut-scanner/device.c, tools/nut-scanner/device.h, tools/nut-
	  scanner/display.c, tools/nut-scanner/scan_usb.c, tools/nut-
	  scanner/scan_xml_http.c: More flexible way to manage optional
	  parameter of each devices...  ...via a simple linked list
	* tools/nut-scanner/display.h, tools/nut-scanner/{scan_usb.h => nut-
	  scan.h}, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_avahi.h, tools/nut-scanner/scan_ipmi.h, tools/nut-
	  scanner/scan_nut.h, tools/nut-scanner/scan_snmp.h, tools/nut-
	  scanner/scan_xml_http.h: Keep only one file for nut-scan library
	  interface
	* tools/nut-scanner/display.h: typo

2011-06-04  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add PowerWalker VI 850 LCD to the list of
	  blazer_usb supported models  (reported by Wayne Thomas)

2011-06-03  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/Makefile.am, tools/nut-scanner/device.c,
	  tools/nut-scanner/device.h, tools/nut-scanner/display.c, tools/nut-
	  scanner/display.h, tools/nut-scanner/nut-scanner.c, tools/nut-
	  scanner/scan_avahi.c, tools/nut-scanner/scan_avahi.h, tools/nut-
	  scanner/scan_ipmi.c, tools/nut-scanner/scan_ipmi.h, tools/nut-
	  scanner/scan_nut.c, tools/nut-scanner/scan_nut.h, tools/nut-
	  scanner/scan_snmp.c, tools/nut-scanner/scan_snmp.h, tools/nut-
	  scanner/scan_usb.c, tools/nut-scanner/scan_usb.h, tools/nut-
	  scanner/scan_xml_http.c, tools/nut-scanner/scan_xml_http.h:
	  Preliminary nut-scanner architecture (on behalf of Fred Bohe,
	  Eaton)

2011-06-01  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Add the missing SHA-256 sum on the Download page
	  / section
	* NEWS, UPGRADING, configure.in, docs/download.txt,
	  docs/website/news.txt: Final update for 2.6.1 release
	* docs/configure.txt: Update '--with-all' option documentation
	* configure.in: HAL deprecation (continued):  HAL support is not
	  enabled anymore when using '--with-all' configure option
	* drivers/mge-hid.c: Add support for 'battery.runtime.low'
	* data/cmdvartab: Add the missing entry for 'ups.efficiency'
	* data/driver.list.in: Add Vivaldi EA200 LED to the list of
	  richcomm_usb supported models  (reported by Sergey Talchuk)
	* drivers/mge-hid.c: Add 'ups.efficiency' data, supported by Eaton 5
	  PX

2011-05-31  Arnaud Quette <arnaud.quette@free.fr>

	* docs/nut-names.txt: Documentation the new 'ups.efficiency' NUT
	  variable
	* data/driver.list.in: Add Eaton 5 PX...  ...to the list of usbhid-
	  ups, mge-shut and newmge-shut supported models
	* scripts/upower/95-upower-hid.rules: Update UPower script with
	  Phoenixtec fix
	* tools/nut-usbinfo.pl: Do not overwrite manufacturer names with
	  empty values
	* drivers/liebert-hid.c: Fix USB VendorID 0x06da, which is
	  Phoenixtec, not Liebert
	* docs/download.txt: Update Subversion access information, following
	  Alioth update
	* docs/download.txt, docs/website/news.txt: Add the Windows Beta
	  package information

2011-05-27  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* scripts/upower/95-upower-hid.rules: Update upower script with
	  Powerware entry

2011-05-27  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scanner.c: Add
	  build rules for libnut-scan library, and some more comments

2011-05-27  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/blazer.c: Don't log status read failures until MAXTRIES
	  subsequent failures.  Occasional communication errors are common
	  for these devices and are not a concern.

2011-05-26  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/bcmxcp.c, drivers/bcmxcp_ser.c: Improve bcmxcp support for
	  older PowerWare 9315 (patch from Chris Adams)

2011-05-25  Arnaud Quette <arnaud.quette@free.fr>

	* server/netinstcmd.c: Fix the missing 'extra value' handling for
	  instant commands

2011-05-24  Michal Soltys <msoltyspl-guest@alioth.debian.org>

	* drivers/apcsmart.c: apcmsart.c: fix upsdrv_shutdown_advanced() -
	  ...with 'continue' statement, sdcmd_*s ignoring 'n' weren't called.

2011-05-20  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/blazer_usb.c: Don't use the USB_DEVICE() declaration macro
	  with non compliant identifiers, ...  ...such as blazer_usb' krauler
	  subdriver (missing from previous commit)

2011-05-20  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/blazer_usb.c, drivers/usb-common.h: Don't use the
	  USB_DEVICE() declaration macro with non compliant identifiers, ...
	  ...such as blazer_usb' krauler subdriver

2011-05-19  Arnaud Quette <arnaud.quette@free.fr>

	* server/netlist.c: State explicitely when device description is not
	  available, ...  ...to avoid user confusion (reported by Noel David
	  Torres Taño, Debian bug #595773
	* docs/man/powercom.txt, drivers/powercom.c: Improve formating and
	  wording of the powercom documentation, ...  ...manual page and
	  driver messages (patch from Keven L. Ates)

2011-05-13  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/powercom.c, drivers/powercom.h: Improve PowerCom BNT 1500A
	  and BNT-other support, ...  ...and bump driver version to 0.13
	  (patch from Keven L. Ates)

2011-04-30  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Complete Informer Compact supported VA ratings
	  (reported by Dushan Tcholich)

2011-04-27  Arnaud Quette <arnaud.quette@free.fr>

	* docs/website/Makefile.am: Enable website quirks to address Internet
	  Explorer 6, ...  ...which were missing since 2.6.0 publication
	* docs/website/web-layout.conf: Complete meta keywords, and enable
	  meta name and keywords on all pages
	* data/driver.list.in: Add Numeric 3000 SW to the list of blazer_ser
	  supported models  (reported by Petr Kubánek)

2011-04-26  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* data/driver.list.in, drivers/blazer_usb.c: Add support for GE EP
	  series  [http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2011-April/006788.html]

2011-04-19  Arnaud Quette <arnaud.quette@free.fr>

	* tools/nut-scanner/nut-scanner.c: Flush remaining comments for this
	  proof-of-concept

2011-04-18  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/libhid.c: Smarter solution for [[SVN:2972]] (pointed by
	  Arjen de Korte)
	* drivers/libhid.c: Trim extraneous end-of-line in buggy HID string
	  tables, ...  ...which results in upsc breaking the communication
	  pipe (Ubuntu bug #753661)

2011-04-15  Arnaud Quette <arnaud.quette@free.fr>

	* docs/stable-hcl.txt: Detail existing guidelines for reporting new
	  device entry
	* docs/features.txt: Refreshed graphic illustrations credits
	* docs/images/advanced.png, docs/images/bigbox.png,
	  docs/images/bizarre.png, docs/images/simple.png: Refreshed graphic
	  illustrations (provided by Eaton)

2011-04-01  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* data/driver.list.in: Add Inform Sinus SS 210 to list of supported
	  devices  [http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2011-March/006767.html]
	* drivers/cps-hid.c: Clamp reported battery charge to 100%  (seems to
	  report AbsoluteStateOfCharge instead of RemainingCapacity)
	  [http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2011-March/006770.html]

2011-03-31  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* data/driver.list.in, drivers/mge-hid.c: Add Eaton Powerware 9140 to
	  the list of usbhid-ups supported models

2011-03-29  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/blazer.c, drivers/blazer_usb.c: Make the terminating '\r'
	  in the Q1 reply optional

2011-03-29  Arnaud Quette <arnaud.quette@free.fr>

	* lib/libupsclient-config.in, lib/libupsclient.pc.in: Fix remaining
	  references to LIBSSL_LDFLAGS, ...  ...instead of LIBSSL_LIBS, which
	  cause unresolved symbol on libupsclient users (reported by Fabrice
	  Coutadeur on Ubuntu)

2011-03-23  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* INSTALL: Reverting previous commit (should not be in the trunk)
	* INSTALL: Add information about installing Windows

2011-03-18  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* include/Makefile.am: The include/nut_stdint.h file is no longer a
	  generated one (part two)
	* include/Makefile.am: The include/nut_stdint.h file is no longer a
	  generated one
	* configure.in, include/.gitignore, include/nut_stdint.h,
	  m4/ax_create_stdint_h.m4: Clean up fixed width integer types.  All
	  C99 capable systems have <inttypes.h>, which shall include
	  <stdint.h>.
	* drivers/solis.c: Fix typo in previous commit
	* drivers/solis.c: Fix compilation warning (no functional change)
	* data/driver.list.in: Update driver list for SVEN Power Pro+ series
	  (recent models ship with a different USB to serial implementation)
	* clients/upssched.c, configure.in, drivers/dstate.c, server/upsd.c:
	  The third argument to accept is an int on HPUX...  ...if
	  _XOPEN_SOURCE_EXTENDED is not defined (reverting previous commit)
	* configure.in: Quick check to see if defining '-munix=95' on HPUX...
	  ...fixes a problem with the accept() call

2011-03-15  Chetan Agarwal <chetanagarwal-guest@alioth.debian.org>

	* drivers/rhino.c: Fix compilation error (no functional change)
	* drivers/rhino.c: Fix missing comment closure from previous commit
	  (no functional change)
	* drivers/bcmxcp_usb.c, drivers/microdowell.c, drivers/rhino.c,
	  drivers/solis.c: Fix remaining C++ style comments, to conform to
	  the NUT coding rules  (no functional change)  on behalf of Prachi
	  Gandhi (prachisgandhi@eaton.com)

2011-03-14  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* configure.in: Quick check to see if defining _REENTRANT on HPUX
	  fixes a compilation warning

2011-03-14  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add IPAR Mini Energy ME 800 to the list of
	  blazer_usb supported models

2011-03-06  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/apcsmart.c: Fix another compilation warning.  Some
	  compilers (rightfully) claim that the value of 'n' may be used
	  without initialization. Until this is resolved, skip over this if
	  the value isn't set.
	* drivers/apcsmart.c: Fix compilation warning
	* drivers/apcsmart.h: Add additional Matrix models
	  [http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2011-March/005319.html]
	* drivers/apcsmart.c: Flush the input buffer before sending a command
	  [on behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c, drivers/apcsmart.h: protocol_verify() only
	  cares about explicitly specified commands...  ...and variables [on
	  behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c: Additional driver variables that can be set to
	  influence shutdown behavior  [on behalf of Michal Soltys
	  <soltys@ziu.info>]
	* drivers/apcsmart.c: Update version and author info [on behalf of
	  Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c: Deal with more different shutdown methods  [on
	  behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c: As 'b' can return different things than
	  firmware version on some old models ...  ...prefer 'V' over 'b' [on
	  behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c: remove superfluous status_commit()  [on behalf
	  of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c, drivers/apcsmart.h: adjust ignored chars and
	  handle over/~over  [on behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.c: cosmetics [on behalf of Michal Soltys
	  <soltys@ziu.info>]
	* drivers/apcsmart.c, drivers/apcsmart.h: remove APC_IGNORE [on
	  behalf of Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.h: add compat hardware, add commands [on behalf of
	  Michal Soltys <soltys@ziu.info>]
	* drivers/apcsmart.h: comsetics - adjust tabs [on behalf of Michal
	  Soltys <soltys@ziu.info>]

2011-03-02  Charles Lepple <clepple+nut@gmail.com>

	* docs/FAQ.txt: Update Mac power-on FAQ

2011-03-01  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, tools/Makefile.am, tools/nut-scanner/.gitignore,
	  tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scanner.c,
	  tools/nut-usbinfo.pl: First stab to create the nut-scanner (proof
	  of concept),  ...with full USB support, and preliminary support for
	  NUT and Eaton XML/HTTP scan
	* drivers/liebert-esp2.c: Improved Liebert ESP II support, ...
	  ...including UPS shutdown (poweroff), 1 and 3-phase input and
	  output variables, and most input / output / bypass / nominal
	  variables, along with a fix for the USB to serial cable (patch from
	  Farkas Levente and Spiros Ioannou)
	* data/driver.list.in: Add Eaton Powerware 9140, using the serial
	  interface, ...  ...to the list of bcmxcp supported models

2011-02-25  Charles Lepple <clepple+nut@gmail.com>

	* docs/download.txt: Moved SHA-256 value into download page, and
	  reformatted a bit.

2011-02-24  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in: Add several upscode2 supported devices that
	  were reported on the list:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsdev/2011-February/005281.html
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2005-July/000031.html

2011-02-21  Arnaud Quette <arnaud.quette@free.fr>

	* data/driver.list.in, drivers/mge-hid.c: Add Eaton Ellipse ECO (with
	  Eco control support)...  ...to the list of usbhid-ups supported
	  models
	* drivers/eaton-mib.c: Add support for the first ambient sensor  (up
	  to 8 sensors can be supported) on Eaton ePDU managed
	* clients/upsrw.c: Add the missing 'help' handler ('-h') to the
	  supported options

2011-02-20  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* docs/man/ups.conf.txt, drivers/dstate.c: Variables that have an
	  override.<variable> in ups.conf are now really immutable.  They
	  can't be changed anymore (not even if they would have been R/W
	  otherwise). Rationale is, that if a user wants to override a value,
	  we should honor that request.  Added documentation accordingly (and
	  corrected previous commit).
	* docs/man/ups.conf.txt, drivers/dstate.c, drivers/main.c: Add
	  'ignorelb' flag to list of UPS fields in ups.conf...  ...to
	  override the LB condition reported by the UPS.  This allows all
	  drivers that report battery.charge (battery.runtime) to shutdown
	  early by setting this flag and battery.charge.low
	  (battery.runtime.low) in ups.conf.
	* data/driver.list.in: Removing subdriver setting  (cypress is auto
	  detected for this VID:PID combination, so there is no need to
	  specify this in usb.conf)

2011-02-19  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: Add Mustek Yukai PowerMust 1000 USB  Reported
	  by Noel David Torres Taño:
	  http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2010-August/006163.html  Other models may be supported as
	  well. *
	  http://www.mustek.com.tw/Yukai/html/prod_ups/PowerMust1000.html *
	  http://www.mustek.com.tw/Yukai/html/UPS.html

2011-02-17  Arnaud Quette <arnaud.quette@free.fr>

	* docs/download.txt: Preliminary support for source release hash,
	  using unsigned SHA256 sum

2011-02-15  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* common/parseconf.c: In PCONF_CTX_t, argsize is an array of type
	  size_t values, ...  ...so instead of using sizeof(int *) we really
	  should use sizeof(size_t) for the size of individual elements

2011-02-15  Charles Lepple <clepple+nut@gmail.com>

	* data/driver.list.in: HCL: Re-add some devices to driver.list.in
	  from [[SVN:2516]]  These entries seem to have been dropped,
	  potentially due to the rename from driver.list to driver.list.in,
	  and the format change.

2011-02-11  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/libhid.c: Restore the nut-2.4.1 behavior for reading
	  reports from devices

2011-02-09  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/dummy-ups.c: Prefer 'snprintf' and 'snprintfcat' over
	  'strncat'  (the latter can overflow the destination buffer)

2011-02-09  Frederic Bohe <fbohe-guest@alioth.debian.org>

	* drivers/dummy-ups.c: Fix a memory leak in dummy-ups driver

2011-02-08  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/apc-hid.c: Add yet another way to shutdown the APC CS-500
	  [http://lists.alioth.debian.org/pipermail/nut-
	  upsuser/2011-January/006550.html]

2011-02-02  Arnaud Quette <arnaud.quette@free.fr>

	* drivers/mge-hid.c: Fix a wrong value mapping resolution, and bump
	  driver's HID data version to 1.20
	* docs/website/web-layout.conf: Unconditional inclusion of Google
	  Analytics code
	* docs/man/dummy-ups.txt, docs/man/metasys.txt, drivers/apcsmart.c,
	  drivers/dummy-ups.c, drivers/genericups.c, drivers/metasys.c,
	  drivers/snmp-ups.c: Fix some spelling errors (base patch from
	  Laurent Bigonville, from Debian)

2011-01-31  Charles Lepple <clepple+nut@gmail.com>

	* docs/documentation.txt, docs/download.txt: Update URL for Trac.

2011-01-28  Arnaud Quette <arnaud.quette@free.fr>

	* docs/security.txt: Fix content to satisfy Docbook
	* configure.in: Add missing variables setting, to allow AC_SUBST()
	  propagation

2011-01-27  Chetan Agarwal <chetanagarwal-guest@alioth.debian.org>

	* drivers/bcmxcp.c: Added implementation for 'test.system.start'
	  instant command.
	* drivers/bcmxcp.h: Added constants for return code and UPS status.
	* data/cmdvartab: Added description for 'test.system.start' command.
	* docs/new-names.txt: Added test.system.start variable

2011-01-22  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* drivers/apc-hid.c: Add mappings to APC HID subdriver

2011-01-19  Emilien Kia <kiae.dev@gmail.com>

	* docs/asciidoc.conf, docs/dir_conflicts.prej,
	  m4/nut_check_libnss.m4, m4/nut_check_libopenssl.m4,
	  scripts/upower/95-upower-hid.rules: Finish trunk merging (see
	  previous commit).
	* COPYING, INSTALL, Makefile.am, NEWS, README, UPGRADING, autogen.sh,
	  clients/Makefile.am, configure.in, data/.gitignore,
	  data/Makefile.am, data/driver.list.in, data/epdu-managed.dev,
	  data/{evolution500.dev => evolution500.seq}, docs/.gitignore,
	  docs/Makefile.am, docs/config-notes.txt, docs/configure.txt,
	  docs/developer-guide.txt, docs/docinfo.xml, docs/documentation.txt,
	  docs/download.txt, docs/history.txt, docs/images/old-cgi.png,
	  docs/man/.gitignore, docs/nut-names.txt, docs/{website => }/stable-
	  hcl.txt, docs/support.txt, docs/user-manual.txt,
	  docs/website/Makefile.am, docs/website/news.txt,
	  docs/website/website.txt, drivers/.gitignore, drivers/Makefile.am,
	  drivers/idowell-hid.c, drivers/idowell-hid.h, drivers/usbhid-ups.c,
	  m4/nut_check_libhal.m4, m4/nut_check_libneon.m4,
	  m4/nut_check_libnetsnmp.m4, m4/nut_check_libpowerman.m4,
	  m4/nut_check_libusb.m4, m4/nut_check_libwrap.m4,
	  scripts/Makefile.am, scripts/README, scripts/augeas/Makefile.am,
	  scripts/augeas/README, scripts/augeas/gen-nutupsconf-aug.py,
	  scripts/augeas/nuthostsconf.aug.in,
	  scripts/augeas/nutnutconf.aug.in,
	  scripts/augeas/nutupsconf.aug.tpl,
	  scripts/augeas/nutupsdconf.aug.in,
	  scripts/augeas/nutupsdusers.aug.in,
	  scripts/augeas/nutupsmonconf.aug.in,
	  scripts/augeas/nutupsschedconf.aug.in,
	  scripts/augeas/nutupssetconf.aug.in,
	  scripts/augeas/tests/test_nut.aug, scripts/hal/.gitignore,
	  scripts/hal/ups-nut-device.fdi.in, scripts/hotplug/.gitignore,
	  scripts/hotplug/libhid.usermap, scripts/python/app/NUT-Monitor,
	  scripts/python/module/PyNUT.py,
	  scripts/python/module/test_nutclient.py, scripts/udev/.gitignore,
	  scripts/udev/nut-usbups.rules.in, scripts/upower/95-upower-
	  hid.rules, server/Makefile.am, server/conf.c, server/desc.c,
	  tools/Makefile.am, tools/nut-hclinfo.py, tools/nut-usbinfo.pl:
	  Merge from trunk ([[SVN:2777]] to HEAD).
	* clients/upsmon.c, conf/upsd.conf.sample, docs/man/upsd.conf.txt,
	  docs/security.txt, server/conf.c, server/netssl.c, server/netssl.h:
	  Add flag to desactivate client certificate validation (in upsd).
	  Define WITH_CLIENT_CERTIFICATE_VALIDATION flag to enable it.

2011-01-18  Emilien Kia <kiae.dev@gmail.com>

	* clients/upsclient.c, clients/upsmon.c: Move warning message about
	  CERTVERIFY in upscli...  ...to be coherant with real behavior.
	* clients/upsclient.c: Force to disable SSLv2 handshake compatibility
	  (if no, nss can not connect to openssl server).
	* clients/upsclient.c: Force disconnect if SSL is not available and
	  CERTVERIFY is 1 (but no FORCESSL).
	* clients/upsclient.c, clients/upsmon.c: Fix CERTVERIFY behaviour for
	  NSS.
	* conf/upsd.conf.sample: Forget a comment heading '#'.
	* clients/upsclient.c: Prevent segfault.

2011-01-17  Charles Lepple <clepple+nut@gmail.com>

	* scripts/Makefile.am: Include perl/Nut.pm in tarball.
	* COPYING, Makefile.am: Include LICENSE-GPL{2,3} in tarball.  Made
	  the text in COPYING agree with the filenames.

2011-01-14  Emilien Kia <kiae.dev@gmail.com>

	* server/netssl.c: Prevent infinite loop when password is not found.

2011-01-11  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* conf/upsmon.conf.sample, docs/man/upsmon.conf.txt: Correct the
	  usage of CERTPATH for OpenSSL

2011-01-11  Emilien Kia <kiae.dev@gmail.com>

	* docs/man/Makefile.am, docs/man/upscli_add_host_cert.txt,
	  docs/man/upscli_cleanup.txt, docs/man/upscli_init.txt,
	  docs/man/upsclient.txt: Add upscli API doc.
	* conf/upsd.conf.sample, docs/man/upsd.conf.txt, server/conf.c,
	  server/netssl.c: Use CERTFILE directive for openssl and CERTPATH
	  for nss.

2011-01-10  Emilien Kia <kiae.dev@gmail.com>

	* docs/security.txt: Add SSL doc about NSS usage.

2011-01-07  Emilien Kia <kiae.dev@gmail.com>

	* conf/upsd.conf.sample, conf/upsmon.conf.sample,
	  docs/man/upsd.conf.txt, docs/man/upsmon.conf.txt: Document
	  upsd.conf and upsmon.conf about security directives.
	* server/conf.c: Deprecate CERTFILE conf var to the benefit of
	  CERTPATH:  ...homogenize conf directive names.

2011-01-06  Emilien Kia <kiae.dev@gmail.com>

	* clients/upsclient.c, server/netssl.c: More human log.
	* clients/upsclient.c, clients/upsclient.h, clients/upsmon.c,
	  server/conf.c, server/netssl.c, server/netssl.h: Add certificate
	  validation (both server and client sides).

2011-01-04  Emilien Kia <kiae.dev@gmail.com>

	* clients/upsclient.c, server/conf.c, server/netssl.c,
	  server/netssl.h, server/upsd.c: Allow to specify server certificate
	  name (instead of hard coded ;)).  Remove unused (client only)
	  callback on server.
	* server/netssl.c: Add more 'lack of initialization' test.
	* clients/upsclient.c, server/conf.c, server/netssl.c, server/upsd.c:
	  Prevent memory leaks and add notes about them.  Add password to
	  decrypt secret key in server.

2010-12-23  Emilien Kia <kiae.dev@gmail.com>

	* clients/upsclient.c, clients/upsclient.h, clients/upsmon.c,
	  m4/nut_check_libnss.m4, server/ctype.h, server/netssl.c,
	  server/netssl.h, server/upsd.c: First implementation of NSS
	  support.

2010-12-22  Emilien Kia <kiae.dev@gmail.com>

	* AUTHORS, clients/upsclient.c, conf/ups.conf.sample, configure.in,
	  data/driver.list.in, docs/FAQ.txt, docs/acknowledgements.txt,
	  docs/cables/sms.txt, docs/config-notes.txt, docs/configure.txt,
	  docs/dir_conflicts.prej, docs/macros.txt, docs/man/Makefile.am,
	  docs/man/blazer.txt, docs/man/index.txt, docs/man/nutupsdrv.txt,
	  docs/man/ups.conf.txt, docs/new-drivers.txt,
	  docs/website/scripts/nut_jquery.js, drivers/Makefile.am,
	  drivers/dstate.c, drivers/dstate.h, drivers/megatec.c,
	  drivers/megatec.h, drivers/megatec_usb.c, m4/nut_check_os.m4,
	  server/upsd.c, tools/nut-usbinfo.pl: Merge trunk from branch
	  creation

2010-12-21  Emilien Kia <kiae.dev@gmail.com>

	* INSTALL, Makefile.am, README, docs/ideas.txt => TODO, UPGRADING,
	  clients/upsclient.c, clients/upsclient.h, clients/upscmd.c,
	  clients/upsrw.c, conf/upsd.conf.sample, conf/upsd.users.sample,
	  configure.in, data/Makefile.am, data/driver.list,
	  data/driver.list.in, docs/.gitignore, docs/FAQ, docs/FAQ.txt,
	  docs/Makefile.am, docs/README, docs/acknowledgements.txt,
	  docs/acpi.txt, docs/asciidoc.txt, docs/big-servers.txt,
	  docs/cables.txt, docs/chroot.txt, docs/commands.txt, docs/config-
	  files.txt, docs/config-notes.txt, docs/configure.txt, docs/contact-
	  closure.txt, docs/data-room.txt, docs/design.txt, docs/developer-
	  guide.txt, docs/developers.txt, docs/documentation.txt,
	  docs/download.txt, docs/features.txt, docs/hid-subdrivers.txt,
	  docs/history.txt, docs/images/advanced.png,
	  docs/images/asciidoc.png, docs/images/bigbox.png,
	  docs/images/bizarre.png, docs/images/blue-arrow.png,
	  docs/images/cables/73-0724.png, docs/images/cables/940-0024C.jpg,
	  docs/images/cables/Lansafecable.jpg,
	  docs/images/cables/SOLA-330.png, docs/images/cables/belkin-f6cx-
	  rkm-xu-cable.jpg, docs/images/cables/mac-940-0024C.png,
	  docs/images/cables/mge-66049.png, docs/images/cables/mge-
	  db9-rj12.jpg, docs/images/cables/mge-db9-rj45.jpg,
	  docs/images/eaton-logo.png, docs/images/note.png, docs/images/nut-
	  banner.png, docs/images/nut_layering.png,
	  docs/images/nut_layering.svg, docs/images/simple.png,
	  docs/images/warning.png, docs/macros.txt, docs/man/Makefile.am,
	  man/apcsmart.8 => docs/man/apcsmart.txt, docs/man/asciidoc.conf,
	  docs/man/bcmxcp.txt, man/bcmxcp_usb.8 => docs/man/bcmxcp_usb.txt,
	  man/belkin.8 => docs/man/belkin.txt, docs/man/belkinunv.txt,
	  man/bestfcom.8 => docs/man/bestfcom.txt, docs/man/bestfortress.txt,
	  docs/man/bestuferrups.txt, man/bestups.8 => docs/man/bestups.txt,
	  man/blazer.8 => docs/man/blazer.txt, man/clone.8 =>
	  docs/man/clone.txt, man/dummy-ups.8 => docs/man/dummy-ups.txt,
	  docs/man/etapro.txt, docs/man/everups.txt, man/gamatronic.8 =>
	  docs/man/gamatronic.txt, man/genericups.8 =>
	  docs/man/genericups.txt, man/hosts.conf.5 =>
	  docs/man/hosts.conf.txt, docs/man/index.txt, docs/man/isbmex.txt,
	  docs/man/ivtscd.txt, docs/man/libupsclient-config.txt,
	  docs/man/liebert-esp2.txt, docs/man/liebert.txt,
	  docs/man/masterguard.txt, man/megatec.8 => docs/man/megatec.txt,
	  docs/man/megatec_usb.txt, man/metasys.8 => docs/man/metasys.txt,
	  docs/man/mge-shut.txt, docs/man/mge-utalk.txt,
	  docs/man/microdowell.txt, docs/man/netxml-ups.txt, man/nut.conf.5
	  => docs/man/nut.conf.txt, docs/man/nutupsdrv.txt, man/oneac.8 =>
	  docs/man/oneac.txt, docs/man/optiups.txt, docs/man/powercom.txt,
	  docs/man/powerman-pdu.txt, man/powerpanel.8 =>
	  docs/man/powerpanel.txt, docs/man/rhino.txt,
	  docs/man/richcomm_usb.txt, docs/man/safenet.txt, docs/man/skel.txt,
	  man/snmp-ups.8 => docs/man/snmp-ups.txt, docs/man/solis.txt,
	  man/tripplite.8 => docs/man/tripplite.txt,
	  docs/man/tripplite_usb.txt, docs/man/tripplitesu.txt,
	  docs/man/ups.conf.txt, docs/man/upsc.txt,
	  docs/man/upscli_connect.txt, docs/man/upscli_disconnect.txt,
	  docs/man/upscli_fd.txt, docs/man/upscli_get.txt,
	  docs/man/upscli_list_next.txt, docs/man/upscli_list_start.txt,
	  docs/man/upscli_readline.txt, docs/man/upscli_sendline.txt,
	  docs/man/upscli_splitaddr.txt, docs/man/upscli_splitname.txt,
	  docs/man/upscli_ssl.txt, docs/man/upscli_strerror.txt,
	  docs/man/upscli_upserror.txt, docs/man/upsclient.txt, man/upscmd.8
	  => docs/man/upscmd.txt, docs/man/upscode2.txt, man/upsd.conf.5 =>
	  docs/man/upsd.conf.txt, docs/man/upsd.txt, man/upsd.users.5 =>
	  docs/man/upsd.users.txt, man/upsdrvctl.8 => docs/man/upsdrvctl.txt,
	  docs/man/upsimage.cgi.txt, docs/man/upslog.txt, man/upsmon.conf.5
	  => docs/man/upsmon.conf.txt, man/upsmon.8 => docs/man/upsmon.txt,
	  man/upsrw.8 => docs/man/upsrw.txt, docs/man/upssched.conf.txt,
	  man/upssched.8 => docs/man/upssched.txt, man/upsset.cgi.8 =>
	  docs/man/upsset.cgi.txt, man/upsset.conf.5 =>
	  docs/man/upsset.conf.txt, man/upsstats.cgi.8 =>
	  docs/man/upsstats.cgi.txt, docs/man/upsstats.html.txt, man/usbhid-
	  ups.8 => docs/man/usbhid-ups.txt, docs/man/victronups.txt,
	  docs/megatec.txt, docs/net-protocol.txt, docs/new-clients.txt,
	  docs/new-drivers.txt, docs/new-names.txt, docs/nut-names.txt,
	  docs/nut-qa.txt, docs/osd-notify.txt, docs/outlets.txt,
	  docs/packager-guide.txt, docs/pager.txt, docs/powersaving.txt,
	  docs/protocol.txt, docs/{upssched.txt => scheduling.txt},
	  docs/security.txt, docs/shutdown.txt, docs/sock-protocol.txt,
	  docs/ssl.txt, docs/support.txt, docs/suspend-to-disk.txt,
	  docs/user-manual.txt, docs/website/Makefile.am,
	  docs/website/css/ie-overrides.css, docs/website/css/web-layout.css,
	  docs/website/css/xhtml11-quirks.css, docs/website/css/xhtml11.css,
	  docs/website/faviconut.ico, docs/website/faviconut.png,
	  docs/website/news.txt, docs/website/projects.txt,
	  docs/website/scripts/filter_png.js, docs/website/scripts/jquery.js,
	  docs/website/scripts/nut_jquery.js, docs/website/scripts/toc.js,
	  docs/website/stable-hcl.txt, docs/website/ups-protocols.txt,
	  docs/website/web-layout.conf, docs/website/website.txt,
	  drivers/apc-hid.c, drivers/belkin.c, drivers/belkin.h,
	  drivers/ietf-mib.c, drivers/libhid.c, drivers/mge-utalk.c,
	  drivers/powerp-bin.c, drivers/powerware-mib.c, drivers/skel.c,
	  drivers/snmp-ups.c, drivers/snmp-ups.h, m4/ax_compare_version.m4,
	  m4/nut_check_asciidoc.m4, m4/nut_check_libnss.m4,
	  m4/nut_check_libopenssl.m4, m4/nut_check_libssl.m4,
	  m4/nut_report_feature.m4, man/Makefile.am, man/bcmxcp.8,
	  man/belkinunv.8, man/bestfortress.8, man/bestuferrups.8,
	  man/etapro.8, man/everups.8, man/isbmex.8, man/ivtscd.8,
	  man/libupsclient-config.1, man/liebert-esp2.8, man/liebert.8,
	  man/masterguard.8, man/megatec_usb.8, man/mge-shut.8, man/mge-
	  utalk.8, man/microdowell.8, man/netxml-ups.8, man/nutupsdrv.8,
	  man/optiups.8, man/powercom.8, man/powerman-pdu.8, man/rhino.8,
	  man/richcomm_usb.8, man/safenet.8, man/skel.8, man/solis.8,
	  man/tripplite_usb.8, man/tripplitesu.8, man/ups.conf.5, man/upsc.8,
	  man/upscli_connect.3, man/upscli_disconnect.3, man/upscli_fd.3,
	  man/upscli_get.3, man/upscli_list_next.3, man/upscli_list_start.3,
	  man/upscli_readline.3, man/upscli_sendline.3,
	  man/upscli_splitaddr.3, man/upscli_splitname.3, man/upscli_ssl.3,
	  man/upscli_strerror.3, man/upscli_upserror.3, man/upsclient.3,
	  man/upscode2.8, man/upsd.8, man/upsimage.cgi.8, man/upslog.8,
	  man/upssched.conf.5, man/upsstats.html.5, man/victronups.8,
	  scripts/upower/95-upower-hid.rules, server/Makefile.am,
	  server/conf.c, server/ctype.h, server/netcmds.h, server/{netssl.c
	  => ssl.c}, server/{netssl.h => ssl.h}, server/upsd.c,
	  tools/Makefile.am, tools/nut-hclinfo.py, tools/nut-usbinfo.pl,
	  tools/svn2cl.authors: Merge from trunk ([[SVN:2761]])

2010-11-30  Arnaud Quette <arnaud.quette@free.fr>

	* configure.in, docs/configure.txt: Change the default SSL
	  implementation to OpenSSL, ...  ...if both OpenSSL and Mozilla NSS
	  are present

2010-11-29  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* server/Makefile.am, server/conf.c, server/netcmds.h, server/{ssl.c
	  => netssl.c}, server/{ssl.h => netssl.h}, server/upsd.c: Resolve
	  namespace conflict with nss_compat_ossl

2010-11-28  Arjen de Korte <adkorte-guest@alioth.debian.org>

	* clients/upsclient.h, m4/nut_check_libnss.m4, server/ctype.h,
	  server/ssl.c, server/ssl.h: Use the 'nss_compat_ossl' compatibility
	  layer...  ...to use the Mozilla NSS library instead of OpenSSL (we
	  might want to include native support in the future, but this will
	  at least allow a quick migration for testing purposes)

2010-11-26  Arnaud Quette <arnaud.quette@free.fr>

	* clients/upsclient.c, clients/upsclient.h, configure.in,
	  docs/configure.txt, docs/macros.txt, m4/nut_check_libnss.m4,
	  m4/nut_check_libopenssl.m4, m4/nut_check_libssl.m4, server/ctype.h,
	  server/ssl.c, server/ssl.h: Implement and document detection and
	  activation of SSL support, ...  ...using either Mozilla NSS or
	  OpenSSL

2010-10-21  Chetan Agarwal <chetanagarwal-guest@alioth.debian.org>

	* drivers/bcmxcp.c: No functional changes  Removed redundant
	  initialization for character buffer and replaced hardcoded value
	  for sprintf with sizeof(buffer)

2010-10-20  Chetan Agarwal <chetanagarwal-guest@alioth.debian.org>

	* drivers/bcmxcp.c: - Add Device Part number reading from config
	  block.  - fix a few typo errors in comments, - Change driver
	  version to 0.25.
	* drivers/bcmxcp.h: define and use BCMXCP_CONFIG_BLOCK_PART_NUMBER
	  constant ...  ...for reading the Device Part Number from Config
	  Block
	* docs/new-names.txt: Add 'device.part' to list of supported
	  variables
	* data/cmdvartab: Add description for new variable added  -
	  'device.part'
