-- Dell Networking OS DCB Proprietary MIB Definition

-- This document explains the proprietary MIB implemented
-- for the DCB Features.

-- Data Center Bridging is a flexible framework that defines the 
-- capabilities required for switches and end points to be part of a 
-- data center network.

-- DCB contains the following capabilities:

--  1. Priority-based flow control (PFC; IEEE 802.1Qbb) 
--     The Priority-based Flow Control (PFC) feature is used for a 
--     link level flow control mechanism that can be independently 
--     controlled for each priority.
--  2. Enhanced transmission selection (ETS; IEEE 802.1Qaz) 
--     The Enhanced Transmission Selection (ETS) feature provides a 
--     common management framework for assignment of bandwidth to 
--     traffic classes
--  3. DCBX is a discovery and capability exchange protocol that is used 
--     by devices enabled for Data Center Bridging to exchange 
--     configuration information. "

DELL-NETWORKING-DCB-MIB DEFINITIONS ::= BEGIN

--  This MIB contains tables used to configure a Dell Networking OS switch
--  for the DCB functionality
--
--  This module will be extended, as needed.
   
IMPORTS
    	Unsigned32,
	MODULE-IDENTITY, 
	OBJECT-TYPE,
	NOTIFICATION-TYPE,
	Counter32,
	Integer32
		FROM SNMPv2-SMI
       InterfaceIndex 
              FROM IF-MIB
	TEXTUAL-CONVENTION,
	TruthValue,
	MacAddress
		FROM SNMPv2-TC
       MODULE-COMPLIANCE,
       OBJECT-GROUP,
       NOTIFICATION-GROUP
              FROM SNMPv2-CONF
       dellNetMgmt 
		FROM DELL-NETWORKING-SMI;

 dellNetDcb MODULE-IDENTITY
        LAST-UPDATED "201204160000Z"  -- Apr 16, 2012
        ORGANIZATION "Dell Inc."
        CONTACT-INFO
            "http://www.dell.com/support"
        

  	  DESCRIPTION 
         "The proprietary extension MIB module for Dell Networking OS DCB and DCBX."

         REVISION   "201204160000Z"  -- Apr 16, 2012
         DESCRIPTION
                    "1.Modified Access permission of following objects to read-only
                       dellNetETSAdminMode,dellNetPFCAdminMode,dellNetDCBXAdminStatus,
                       dellNetDcbPfcMinThreshold,dellNetDcbPfcMaxThreshold,
                       dellNetDcbETSAdminStatus,dellNetDcbPFCAdminStatus,
                       dellNetETSSystemControl,dellNetETSModuleStatus,
                       dellNetPFCSystemControl,dellNetPFCModuleStatus,
                       dellNetETSGlobalEnableTrap,dellNetPFCGlobalEnableTrap,
                       as enabling DCB on interface has been changed to policy based options.
                     2.Removed 'auto' from DcbAdminMode as ets/pfc mode supported are on/off.
                     3.Removed dellNetDcbRowStatus,dellNetETSRowStatus,dellNetPFCRowStatus objects."

         REVISION   "201111240000Z" -- Nov 24, 2011
         DESCRIPTION 
                    "Added interoperablity support - Modified MIB to reflect 
                    Configuration Exchange and Auto detection of version.
                    1. Modified DcbState Textual Convention to include internally 
                    propagated information from Config Source.
                    2. Modified DcbStateMachineType - for legacy DCBX versions 
                    like CIN, CEE we only have a feature state machine.
                    3. Added textual convention DcbxPortRole for various port 
                    roles supported for Configuration Exchange.
                    4. Added textual convention DcbxVersion for the different 
                    versions of DCBX - CIN/ CEE /IEEEv2.4.
                    5. Added a new table dellNetDCBXPortStatusTable for the 
                    statistics and configuration exchange and version specific 
                    details.
                    6. Added Compliance and Conformance information."
         REVISION   "201009250000Z" -- Aug 25 2010 
         DESCRIPTION "Initial version of DCBX mib."
    ::=  { dellNetMgmt 15}

 EnabledStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "A simple status value for the object."
    SYNTAX      INTEGER { enabled(1), disabled(2) }

 DcbAdminMode ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION

         "'on(1)', In this mode, the configurations,  
         either from this system or the remote system will take
         effect based on DCBX negotiations.

         'off(2)', In this mode, all the operational(local) parameters 
	 for the feature will be same as Admin Configuration Parameters. 
	 But Operational(local) parameters do not have any impact in the system."

    SYNTAX      INTEGER { on(1), off(2)}

 DcbState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
 	"The state of the DCBX state machine.

	 off '(0)', In this state all Operational(local) parameters
	 for the feature will be same as Admin Configuration parameters
	 but will not be operational in the system(hardware).

        init '(1)', In this state all Operational(local) parameters
	 for the feature will be same as Admin Configuration Parameters.

        rxrecommended '(2)', In this state all the Operational(local) 
	 parameters for the feature will be same as particular 
	 feature Remote Parameters.
	  
	 internallypropagated '(3)', In this state all the Operational(local)
	 parameters for the feature will be same as the internal propagated 
	 information from the config source."
    SYNTAX      INTEGER { off(0), init(1), rxrecommended(2), internallypropagated(3) }

 DcbStateMachineType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "asymmetric'(1)',By using this state machine the operational parameters 
                        for the DCB feature can be same as peer or not.
         symmetric '(2)',By using this state machine the operational parameters 
                        for the DCB feature will be same as peer. 
	  feature '(3)' Feature State machine as used by legacy DCBX - CIN/CEE 
			versions."
    SYNTAX      INTEGER { asymmetric(1), symmetric(2), feature(3) }

 DcbxPortRole ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
            "."
    SYNTAX      INTEGER  {
            manual(1),
            autoup(2),
            autodown(3),
            configSource(4)
    }

 DcbxVersion ::= TEXTUAL-CONVENTION
    STATUS     current
    DESCRIPTION
            "."
    SYNTAX      INTEGER  {
            auto(1),
            ieee(2),
            cin(3),
            cee(4)
    }

-- ****************************************************************************
--                           Groups in the MIB
-- ****************************************************************************

dellNetDcbSystem   		OBJECT IDENTIFIER ::= { dellNetDcb 1 }
dellNetDcbObjects  		OBJECT IDENTIFIER ::= { dellNetDcb 2 }
dellNetDcbApplicationObjects   OBJECT IDENTIFIER ::= { dellNetDcb 3 }
dellNetDcbNotificationObjects  OBJECT IDENTIFIER ::= { dellNetDcb 4 }

dellNetDCBXObjects 	OBJECT IDENTIFIER ::= { dellNetDcbApplicationObjects 1 }
dellNetETSObjects	OBJECT IDENTIFIER ::= { dellNetDcbApplicationObjects 2 }
dellNetPFCObjects	OBJECT IDENTIFIER ::= { dellNetDcbApplicationObjects 3 }

dellNetDCBXScalars	OBJECT IDENTIFIER ::= { dellNetDCBXObjects 1 }
dellNetETSScalars	OBJECT IDENTIFIER ::= { dellNetETSObjects 1 }
dellNetPFCScalars	OBJECT IDENTIFIER ::= { dellNetPFCObjects 1 }


-- ****************************************************************************
-- DCB Scalar  MIB Objects
-- ****************************************************************************

 dellNetDcbPfcMinThreshold    OBJECT-TYPE
    SYNTAX        Unsigned32 ( 1..65535 )
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The minimum PFC(Priority Based Flow Control) threshold for the switch.
         This Object indicates the minimum Receive queue buffer count. 
         The minimum and maximum values for this object may vary based on the 
         underlying hardware's capacity."
    ::= { dellNetDcbSystem 1 }

 dellNetDcbPfcMaxThreshold    OBJECT-TYPE
    SYNTAX        Unsigned32 ( 1..65535 )
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The maximum PFC(Priority Based Flow Control)threshold for the switch.
         This Object indicates the maximum Receive queue buffer count. 
         The minimum and maximum values for this object may vary based 
         on the underlying hardware's capacity. "
    ::= { dellNetDcbSystem 2 }

 dellNetDcbMaxPfcProfiles    OBJECT-TYPE
    SYNTAX        Unsigned32 (1..256)
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The maximum number of PFC(Priority Based Flow Control)profiles supported 
         by the device.

         A PFC profile is a bitmap, containing the status of PFC for all the
         priorities.

         If Bit 0 is set, then it means PFC is enabled for priority 0, otherwise 
         PFC is disabled for priority 0.
         
         If Bit 1 is set, then it means PFC is enabled for priority 1, otherwise 
         PFC is disabled for priority 1, and so on.

         If this object value is zero, it means all the bits are set to zero and 
         PFC is disabled for all priorities.

         If this object's value is 3, it means the bits 0 and 1 are set and 
         PFC is enabled for priorities 0 and 1 and disabled for all other priorities.

         Device supporting 256 PFC profiles, means all possible combination of
         PFC status on 8 priorities are supported. "

    DEFVAL { 256 }
    ::= { dellNetDcbSystem 3}

-- ****************************************************************************
-- DCB Port Configuration MIB Objects
-- ****************************************************************************

 dellNetDcbPortTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF DellNetDcbPortEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "Port table contains the DCB features 
         (Enhanced Transmission Selection/Priortiy Based Flow Control) 
         status (enabled or disabled)."
    ::= { dellNetDcbObjects 1 }

 dellNetDcbPortEntry    OBJECT-TYPE
    SYNTAX      DellNetDcbPortEntry
    MAX-ACCESS  not-accessible
    STATUS      obsolete
    DESCRIPTION
        "An entry containing DCB control parameters for a particular port."
    INDEX  {dellNetDcbPortNumber}
    ::= { dellNetDcbPortTable 1 }

 DellNetDcbPortEntry ::= 
 SEQUENCE {
    dellNetDcbPortNumber	  InterfaceIndex,
    dellNetDcbETSAdminStatus     EnabledStatus,
    dellNetDcbPFCAdminStatus     EnabledStatus
    }

 dellNetDcbPortNumber OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible 
    STATUS       obsolete
    DESCRIPTION
       "This indicates the interface identifier for which the Dcb 
        configuration is applied." 
    ::= { dellNetDcbPortEntry 1 }

 dellNetDcbETSAdminStatus    OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object is used to display if ETS feature is 
         enabled or disabled on the given port."

    DEFVAL { enabled }
    ::= { dellNetDcbPortEntry 2 }

 dellNetDcbPFCAdminStatus    OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-only
    STATUS      obsolete
    DESCRIPTION
        "This object is used to display if PFC feature is
         enabled or disabled on the given port."

    DEFVAL { enabled }
    ::= { dellNetDcbPortEntry 3 }

-- ****************************************************************************
-- DCBX Scalar Objects
-- ****************************************************************************

 dellNetDcbxGlobalTraceLevel    OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object is used to enable Trace Statements in DCBX Module.

         A FOUR BYTE integer is used for enabling the level of tracing.
         Each BIT in the four byte integer represents a particular
         level of Trace.

         The mapping between the bit positions & the level of trace is
         as follows:
                  1 - Management Traces
                  2 - DCBX State Machine Traces
                  3 - TLV Traces
                  4 - System Resource Traces
                  5 - Failure Traces
                  6 - Configuration Exchange Traces
                  7 - Auto Detection Traces

         The remaining bits are unused.

         The user has to enter the corresponding INTEGER VALUE for the
         trace to be set. Only one trace can be enabled at a time.
         To enable all the traces, sum of all individual
         traces must be provided."
    ::= { dellNetDCBXScalars 1 }

 dellNetDCBXGlobalVersion       OBJECT-TYPE
    SYNTAX        DcbxVersion
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
         "CIN is Cisco Intel Nuova DCBX (version 1.0). 
         CEE is converged enhanced ethernet DCBX (version 1.06). 
         IEEE is 802-1 az version.
         The default value is auto.

         DCBX supports the legacy implementations v1.0 (CIN) and 
         v1.06 (CEE) in addition to standard IEEE version 2.4 DCBX.

         1.DCBX starts in standard IEEE mode by sending an IEEE 
         standard version 2.4 DCBX frame. If the peer responds, 
         then IEEE standard version 2.4 DCBX is used,Starts means
         after a link up, a DCBX timeout (or multiple peer 
         condition) or when commanded by the network operator. 
         If DCBX receives a DCBX frame with an OUI indicating a 
         legacy version, it immediately switches into legacy mode
         for the detected version and does not wait for the
         3x LLDP fast timeout.
         2.If no IEEE DCBX response is received within 3 times the 
         LLDP fast transmit timeout period, DCBX immediately 
         transmits a version 1.06 DCBX frame with the 
         appropriate version number. If DCBX receives a DCBX
         frame with an OUI indicating IEEE standard support, 
         it immediately switches into IEEE standard mode and 
         does not wait for the timer. If DCBX receives a DCBX 
         frame with an OUI indicating legacy mode and a version
         number indicating version 1.0 support, it immediately 
         switches into legacy 1.0 mode and does not wait for the
         timer.
         3.If no version 1.06 response is received within 3 times
         the DCBX fast transmit timeout period, DCBX falls back 
         to version 1.0 and immediately transmits a version 1.0 
         frame. If no response is received within 3 times the 
         DCBX fast transmit period, DCBX waits the standard LLDP 
         timeout period, and then begins again with step 1. If 
         DCBX receives a DCBX frame with an OUI indicating IEEE 
         standard mode, it immediately switches into IEEE 
         standard mode."
     DEFVAL { 1 }
     ::= { dellNetDCBXScalars 2 }

-- ****************************************************************************
-- DCBX Port Configuration MIB Objects
-- ****************************************************************************

 dellNetDCBXPortTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF DellNetDCBXPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Port table contains the DCBX feature status (enabled or disabled)."
    ::= { dellNetDCBXObjects 2 }

 dellNetDCBXPortEntry    OBJECT-TYPE
    SYNTAX      DellNetDCBXPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing DCBX control parameters for a particular port."
    INDEX  {dellNetDCBXPortNumber}
    ::= { dellNetDCBXPortTable 1 }

 DellNetDCBXPortEntry ::= 
 SEQUENCE {
    dellNetDCBXPortNumber	   		InterfaceIndex,
    dellNetDCBXAdminStatus     		EnabledStatus,
    dellNetDCBXAutoCfgPortRole 		DcbxPortRole,
    dellNetDCBXPortVersion     		DcbxVersion,    
    dellNetDCBXPortSupportedTLVs   	BITS,
    dellNetDCBXPortConfigTLVsTxEnable 	BITS
    }

 dellNetDCBXPortNumber OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible 
    STATUS       current
    DESCRIPTION
       "This indicates the interface identifier for which the DCBX 
        configuration is applied." 
    ::= { dellNetDCBXPortEntry 1 }

 dellNetDCBXAdminStatus    OBJECT-TYPE
    SYNTAX      EnabledStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display if DCBX feature is 
         enabled(1) or disabled(2) on the given port."

    DEFVAL { enabled }
    ::= { dellNetDCBXPortEntry 2 }

 dellNetDCBXAutoCfgPortRole OBJECT-TYPE
    SYNTAX      DcbxPortRole   
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        " Ports operating in the manual role do not have their 
          configuration affected by peer devices or by internal 
          propagation of configuration. These ports will advertise 
          their configuration to their peer if DCBX is enabled 
          on that port.

          Auto-up: Advertises a configuration, but is also willing 
          to accept a configuration from the link-partner and 
          propagate it internally to the auto-downstream ports 
          as well as receive configuration propagated internally 
          by other auto-upstream ports.

          Auto-down: Advertises a configuration but is not willing 
          to accept one from the link partner. However, the port 
          will accept a configuration propagated internally by the 
          configuration source.

          Configuration Source:In this role, the port has been 
          manually selected to be the configuration source. 
          Configuration received over this port is propagated 
          to the other auto-configuration ports."
    DEFVAL { 1 }
    ::= { dellNetDCBXPortEntry 3 }

 dellNetDCBXPortVersion OBJECT-TYPE
    SYNTAX      DcbxVersion 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "CIN is Cisco Intel Nuova DCBX (version 1.0). 
          CEE is converged enhanced ethernet DCBX (version 1.06). 
          IEEE is 802-1 az version.
          The default value is auto.

          DCBX supports the legacy implementations v1.0 (CIN) and 
          v1.06 (CEE) in addition to standard IEEE version 2.4 DCBX.

          1.DCBX starts in standard IEEE mode by sending an IEEE 
          standard version 2.4 DCBX frame. If the peer responds, 
          then IEEE standard version 2.4 DCBX is used,Starts means
          after a link up, a DCBX timeout (or multiple peer 
          condition) or when commanded by the network operator. 
          If DCBX receives a DCBX frame with an OUI indicating a 
          legacy version, it immediately switches into legacy mode
          for the detected version and does not wait for the
          3x LLDP fast timeout.
          2.If no IEEE DCBX response is received within 3 times the 
          LLDP fast transmit timeout period, DCBX immediately 
          transmits a version 1.06 DCBX frame with the 
          appropriate version number. If DCBX receives a DCBX
          frame with an OUI indicating IEEE standard support, 
          it immediately switches into IEEE standard mode and 
          does not wait for the timer. If DCBX receives a DCBX 
          frame with an OUI indicating legacy mode and a version
          number indicating version 1.0 support, it immediately 
          switches into legacy 1.0 mode and does not wait for the
          timer.
          3.If no version 1.06 response is received within 3 times
          the DCBX fast transmit timeout period, DCBX falls back 
          to version 1.0 and immediately transmits a version 1.0 
          frame. If no response is received within 3 times the 
          DCBX fast transmit period, DCBX waits the standard LLDP 
          timeout period, and then begins again with step 1. If 
          DCBX receives a DCBX frame with an OUI indicating IEEE 
          standard mode, it immediately switches into IEEE 
          standard mode."
    DEFVAL { 1 }
    ::= { dellNetDCBXPortEntry 4 }

 dellNetDCBXPortSupportedTLVs      OBJECT-TYPE
    SYNTAX       BITS {
                    pfc(0),
                    etsConfig(1),
                    etsRecom(2),
                    applicationPriorityFCOE(3),
                    applicationPriorityISCSI(4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION  
        "Bitmap that includes the supported set of DCBX LLDP
        TLVs the device is capable of and whose transmission is allowed on
        the local LLDP agent by network management.

        Having the bit 'pfc(0)' set indicates that the LLDP
        transmit PFC TLV as part of DCBX TLVs.

        Having the bit 'etcConfig(1)' set indicates that the LLDP
        transmit ETS configuration TLV as part of DCBX TLVs.

        Having the bit 'etsRecom(2)' set indicates that
        transmit ETS Recommendation TLV as part of DCBX TLVs.

        Having the bit 'applicationPriorityFCOE(3)' set indicates that
        the LLDP transmit applicationPriority TLV for FCOE as part of
        DCBX TLVs.
            
        Having the bit 'applicationPriorityISCSI(4)' set indicates that
        the LLDP transmit applicationPriority TLV for ISCSI as part of
        DCBX TLVs."
   ::= { dellNetDCBXPortEntry 5 }

 dellNetDCBXPortConfigTLVsTxEnable OBJECT-TYPE
    SYNTAX       BITS {
                        pfc(0),
                        etsConfig(1),
                        etsRecom(2),
                        applicationPriorityFCOE(3),
                        applicationPriorityISCSI(4)
    }  
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Bitmap that includes the DCBX defined set of LLDP
       TLVs whose transmission is enabled on the local LLDP agent by 
       network management.

       Having the bit 'pfc(0)' set indicates that the LLDP
       transmit PFC TLV as part of DCBX TLVs.

       Having the bit 'etsConfig(1)' set indicates that the LLDP
       transmit ETS configuration TLV as part of DCBX TLVs.

       Having the bit 'etsRecom(2)' set indicates that
       transmit ETS Recommendation TLV as part of DCBX TLVs.

       Having the bit 'applicationPriorityFCOE(3)' set indicates that
       the LLDP transmit applicationPriority TLV for FCOE as part of 
       DCBX TLVs.
            
       Having the bit 'applicationPriorityISCSI(4)' set indicates that
       the LLDP transmit applicationPriority TLV for ISCSI as part of 
       DCBX TLVs."
    ::= { dellNetDCBXPortEntry 6 }
         
-- ****************************************************************************
-- DCBX Statistics 
-- ****************************************************************************

 dellNetDCBXPortStatusTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF DellNetDCBXPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "."
    ::= { dellNetDCBXObjects 3 }

 dellNetDCBXPortStatusEntry OBJECT-TYPE
    SYNTAX      DellNetDCBXPortStatusEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "."
    AUGMENTS { dellNetDCBXPortEntry }
    ::= { dellNetDCBXPortStatusTable 1 }

 DellNetDCBXPortStatusEntry::=
    SEQUENCE {
            dellNetDCBXPortOperVersion
                DcbxVersion,
            dellNetDCBXPortPeerMACaddress
                MacAddress,
            dellNetDCBXPortCfgSource
                INTEGER,
            dellNetDCBXOperStatus 
                EnabledStatus,
            dellNetDCBXPortMultiplePeerCount
                Counter32,
            dellNetDCBXPortPeerRemovedCount
                Counter32,
            dellNetDCBXPortPeerOperVersionNum
                Unsigned32,
            dellNetDCBXPortPeerMaxVersion
                Unsigned32,
            dellNetDCBXPortSeqNum
                Unsigned32,
            dellNetDCBXPortAckNum
                Unsigned32,
            dellNetDCBXPortPeerRcvdAckNum
                Unsigned32,
            dellNetDCBXPortTxCount
                Counter32,
            dellNetDCBXPortRxCount
                Counter32,
            dellNetDCBXPortErrorFramesCount
                Counter32
         }

 dellNetDCBXPortOperVersion     OBJECT-TYPE
    SYNTAX      DcbxVersion
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the DCBX mode in which  the interface is 
         currently operating."
    DEFVAL { 1 }
    ::= { dellNetDCBXPortStatusEntry 2 }

 dellNetDCBXPortPeerMACaddress  OBJECT-TYPE
    SYNTAX      MacAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "MAC Address of the DCBX peer."
    ::= { dellNetDCBXPortStatusEntry 3 }

 dellNetDCBXPortCfgSource    OBJECT-TYPE
    SYNTAX      INTEGER {
                       false(0),
                       true(1)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates if this port is the source of configuration 
         information for auto-* ports."     
    ::= { dellNetDCBXPortStatusEntry 4 }

 dellNetDCBXOperStatus OBJECT-TYPE
    SYNTAX         EnabledStatus
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
        "This object gives information on the operational status of 
         DCBX on the given port.
         Enabled(1) indicates DCBX on the port is in sync with the
         remote and is operationally up.
         Disabled(2) indicates DCBX on the port is operationally 
         disabled."
    ::= { dellNetDCBXPortStatusEntry 5 }

 dellNetDCBXPortMultiplePeerCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Indicates number of times multiple peers were detected. 
         A duplicate peer is when more than one DCBX peer is 
         detected on a port."
    ::= { dellNetDCBXPortStatusEntry 6 }

 dellNetDCBXPortPeerRemovedCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
         "."
    ::= { dellNetDCBXPortStatusEntry 7 }

 dellNetDCBXPortPeerOperVersionNum  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the operational version of the peer DCBX device. 
         Valid only when peer device is a CEE/CIN DCBX device."
    ::= { dellNetDCBXPortStatusEntry 8 }

 dellNetDCBXPortPeerMaxVersion  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the max version of the peer DCBX device. 
         Valid only when peer device is CEE/CIN DCBX device."
    ::= { dellNetDCBXPortStatusEntry 9 }

 dellNetDCBXPortSeqNum  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the current sequence number that is sent 
         in DCBX control TLVs in CEE/CIN Mode."
    ::= { dellNetDCBXPortStatusEntry 10 }

 dellNetDCBXPortAckNum  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the current ACK number that is to be sent 
         to peer in DCBX control TLVs in CEE/CIN Mode."
    ::= { dellNetDCBXPortStatusEntry 11 }

 dellNetDCBXPortPeerRcvdAckNum  OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Specifies the current ACK number that is sent by peer 
         in DCBX control TLV in CEE/CIN Mode."
    ::= { dellNetDCBXPortStatusEntry 12 }

 dellNetDCBXPortTxCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of DCBX frames transmitted per interface."
    ::= { dellNetDCBXPortStatusEntry 13 }

 dellNetDCBXPortRxCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of DCBX frames received per interface."
    ::= { dellNetDCBXPortStatusEntry 14 }

 dellNetDCBXPortErrorFramesCount  OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "The number of DCBX frames discarded due to errors in the frame."
    ::= { dellNetDCBXPortStatusEntry 15 }

-- ****************************************************************************
-- ETS Scalar Objects
-- ****************************************************************************

 dellNetETSSystemControl   OBJECT-TYPE
    SYNTAX        INTEGER { running(1), shutdown(2) }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The ETS(Enhanced Transmission selection) system control status 
	 for the switch.
	 
	 It indicates whether ETS Module in the system is 
	 running or shutdown. When this object returns 'running', 
	 resources required by ETS module are allocated and 
	 the module is running. When this object returns 'shutdown', 
	 all the pools used by ETS module are released to the system."
    DEFVAL { running }
    ::= { dellNetETSScalars 1 }

 dellNetETSModuleStatus   OBJECT-TYPE
    SYNTAX        EnabledStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The ETS(Enhanced Transmission Selection) Module status for the switch.
	 
	 If this object returns with 'disabled', then all the ports
	 have the ETS feature disabled in the system(hardware)
	 and the DCBX state machine has stopped on the ports.
	
	 If this object returns with 'enabled', then all the ports 
	 have the ETS feature enabled in the system(hardware) 
	 and the DCBX state machine is running on the ports."
    DEFVAL { enabled }
    ::= { dellNetETSScalars 2 }

 dellNetETSClearCounters   OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object when set to TRUE, clears the following counters
         for the ETS Module:
	    dellNetETSConfTxTLVCounter,  
	    dellNetETSConfRxTLVCounter,
	    dellNetETSConfRxTLVErrors,
	    dellNetETSRecoTxTLVCounter,
	    dellNetETSRecoRxTLVCounter,
	    dellNetETSRecoRxTLVErrors.	 

         Setting this object to FALSE has no effect. 
         This object always returns FALSE when read."   
    DEFVAL { false }
    ::= {dellNetETSScalars 3 }

 dellNetETSGlobalEnableTrap   OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "This object indicates whether the transmission of TRAP
            notification messages for ETS feature is enabled or disabled."

    DEFVAL { 0 }
    ::= { dellNetETSScalars 4 }

-- ****************************************************************************
-- ETS Port Configuration table 
-- ****************************************************************************

 dellNetETSPortTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF DellNetETSPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "ETS Port table contains the ETS (Enhanced Transmission Selection) features 
         information specific to this port. 

	 An entry created in this table in the following tables in the standard 
	 DCBX Mib for this port.
	 lldpXdot1dcbxConfigTCSupportedTable,
	 lldpXdot1dcbxConfigETSConfigurationTable,
	 lldpXdot1dcbxConfigETSRecommendationTable,
	 lldpXdot1dcbxLocTCSupportedTable,
	 lldpXdot1dcbxLocETSBasicConfigurationTable,
	 lldpXdot1dcbxLocETSConPriorityAssignmentTable,
	 lldpXdot1dcbxLocETSRecommendationTable,
	 lldpXdot1dcbxAdminTCSupportedTable,
	 lldpXdot1dcbxAdminETSBasicConfigurationTable,
	 lldpXdot1dcbxAdminETSConPriorityAssignmentTable,
	 lldpXdot1dcbxAdminETSRecommendationTable.
 
	 Deletion of entry in this table deletes all the entries in the above tables 
	 in the standatd DCBX mib for this port."
    ::= { dellNetETSObjects 2 }

 dellNetETSPortEntry    OBJECT-TYPE
    SYNTAX      DellNetETSPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing ETS control parameters and ETS information
	 for a particular port."
    INDEX  {dellNetETSPortNumber}
    ::= { dellNetETSPortTable 1 }

 DellNetETSPortEntry ::= 
 SEQUENCE {
    dellNetETSPortNumber	  InterfaceIndex,
    dellNetETSAdminMode     	  DcbAdminMode,
    dellNetETSDcbxOperState      DcbState,
    dellNetETSDcbxStateMachine   DcbStateMachineType,
    dellNetETSOperStatus         EnabledStatus,
    dellNetETSClearTLVCounters   TruthValue,
    dellNetETSConfTxTLVCounter   Counter32,
    dellNetETSConfRxTLVCounter   Counter32,
    dellNetETSConfRxTLVErrors    Counter32,
    dellNetETSRecoTxTLVCounter   Counter32,
    dellNetETSRecoRxTLVCounter   Counter32,
    dellNetETSRecoRxTLVErrors    Counter32
    }

 dellNetETSPortNumber OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible 
    STATUS       current
    DESCRIPTION
       "This indicates the interface identifier for which the ETS 
        configuration is applied." 
    ::= { dellNetETSPortEntry 1 }

 dellNetETSAdminMode    OBJECT-TYPE
    SYNTAX      DcbAdminMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display the Admin mode for ETS feature on
         the given port.
          
         If the mode is 'on(1)',ETS feature is enabled on this port.
         ETS configurations, either from this system or
         the remote system will take effect based on DCBX negotiations.

         If the mode is 'off(2)', ETS feature is disabled on this port. 
         Operational(local) parameters is same as Admin Configuration 
         Parameters. But Operational(local) parameters do not have any impact 
         in the system and dellNetETSOperState is in 'Off' state.
         dellNetETSDcbxOperState becomes oper up if remote is also disabled.

         The Operational(local) parameters do not have any impact in 
         the system if this object value is 'on(1)' and 
         dellNetETSModuleStatus is disabled. dellNetETSDcbxOperState will 
         be in 'Off' State."
    DEFVAL { on }
    ::= { dellNetETSPortEntry 2 }

 dellNetETSDcbxOperState    OBJECT-TYPE
    SYNTAX      DcbState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display the current state of the
	 DCBX state machine for the ETS feature on the given port.

         If state is Off '(0)', then ETS Operational(local) parameters
	 will be same as ETS Admin Configuration Parameters and will
	 not have any impact in the system(hardware).

         If state is init '(1)', then ETS Operational(local) parameters
	 will be same as ETS Admin Configuration Parameters.

         If state is rxrecommended '(2)', then ETS Operational(local) parameters
	 will be same as ETS Remote Parameters.
	  
	  internallypropagated '(3)', In this state all the Operational(local)
	 parameters for the feature will be same as the internal propagated 
	 information from the config source."
    ::= { dellNetETSPortEntry 3 }

 dellNetETSDcbxStateMachine    OBJECT-TYPE
    SYNTAX      DcbStateMachineType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display the DCBX state machine 
	 type that is used by the ETS feature on the given port."
    ::= { dellNetETSPortEntry 4 }

 dellNetETSOperStatus      OBJECT-TYPE
    SYNTAX         EnabledStatus
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "This object gives information on the operational status of ETS
        on the given port.
        Enabled(1) indicates ETS on the port is in sync with the remote
        and is operationally up.
        Disabled(2) indicates ETS on the port is operationally disabled."
    ::= { dellNetETSPortEntry 5 }

 dellNetETSClearTLVCounters    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object when set to TRUE, clears the following counters
         associated with a Port:
	    dellNetETSConfTxTLVCounter,  
	    dellNetETSConfRxTLVCounter,
	    dellNetETSConfRxTLVErrors,
	    dellNetETSRecoTxTLVCounter,
	    dellNetETSRecoRxTLVCounter,
	    dellNetETSRecoRxTLVErrors.	    

         Setting this object to FALSE has no effect. 
         This object always returns FALSE when read."    
    DEFVAL { false }
    ::= { dellNetETSPortEntry 6 }

 dellNetETSConfTxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of ETS 
	 configuration TLV that are transmitted from this port. 
	 This counter will be incremented every time when there 
	 is ETS Configuration TLV is generated and transmitted 
	 to the LLDP."
    ::= { dellNetETSPortEntry 7 }

 dellNetETSConfRxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of ETS 
	 ConfigurationTLV that are received in this port. This 
	 counter will be incremented every time when there is ETS 
	 Configuration TLV is received from the LLDP."
    ::= { dellNetETSPortEntry 8 }

 dellNetETSConfRxTLVErrors    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of number of malformed 
	 ETS Conf TLVs received by ETS. This counter will be 
	 incremented every time a ETS Conf TLV is dropped by ETS."
    ::= { dellNetETSPortEntry 9 }


 dellNetETSRecoTxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of ETS 
	 Recommendation TLV that are transmitted from this port. 
	 This counter will be incremented every time when there 
	 is ETS Recommendation TLV is generated and transmitted 
	 to the LLDP."
    ::= { dellNetETSPortEntry 10 }

 dellNetETSRecoRxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of ETS 
	 Recommendation TLV that are received in this port. This 
	 counter will be incremented every time when there is ETS 
	 Recommendation TLV is received from the LLDP."
    ::= { dellNetETSPortEntry 11 }

 dellNetETSRecoRxTLVErrors    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of number of malformed 
	 ETS Reco TLVs received by ETS. This counter will be 
	 incremented every time a ETS Reco TLV is dropped by ETS."
    ::= { dellNetETSPortEntry 12 }

-- ****************************************************************************
--  PFC Scalar Objects
-- ****************************************************************************

 dellNetPFCSystemControl   OBJECT-TYPE
    SYNTAX        INTEGER { running(1), shutdown(2) }
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The PFC(Priority Based Flow Control) system control status for the switch.

         It indicates whether PFC Module in the system is
         running or shutdown. When this object returns 'running',
         resources required by PFC module are allocated and
         the module is running. When this object returns 'shutdown',
         all the pools used by PFC module are released to the system."

    DEFVAL { running }
    ::= { dellNetPFCScalars 1 }
 
 dellNetPFCModuleStatus   OBJECT-TYPE
    SYNTAX        EnabledStatus
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
        "The PFC(Priority Based Flow Control) Module status for the switch.
	 
	 If this object returns with 'disabled', then all the ports
	 have the PFC feature disabled in the system(hardware)
	 and the DCBX state machine has stopped on the ports.

	 If this object returns with 'enabled', then all the ports
	 have the PFC feature enabled in the system(hardware)
	 and the DCBX state machine is running on the ports."
    DEFVAL { enabled }
    ::= { dellNetPFCScalars 2 }

 dellNetPFCClearCounters   OBJECT-TYPE
    SYNTAX        TruthValue
    MAX-ACCESS    read-write
    STATUS        current
    DESCRIPTION
        "This object when set to TRUE, clears the following counters
         for the PFC Module:
	    dellNetPFCTxTLVCounter,
	    dellNetPFCRxTLVCounter,
	    dellNetPFCRxTLVErrors.

         Setting this object to FALSE has no effect. 
         This object always returns FALSE when read."    
    DEFVAL { false }
    ::= {dellNetPFCScalars 3 }

 dellNetPFCGlobalEnableTrap   OBJECT-TYPE
    SYNTAX        Integer32
    MAX-ACCESS    read-only
    STATUS        current
    DESCRIPTION
           "This object indicates whether the transmission of TRAP
            notification messages for PFC feature is enabled or disabled."

    DEFVAL { 0 }           
    ::= { dellNetPFCScalars 4 }

-- ****************************************************************************
--  PFC Port Configuration table 
-- ****************************************************************************

 dellNetPFCPortTable    OBJECT-TYPE
    SYNTAX      SEQUENCE OF DellNetPFCPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "PFC Port table contains the PFC (Priortiy Based Flow Control) features 
         information specific to this port. 

	 An entry created in the port table populates the entry in this table and 
	 in the following tables in the standard DCBX Mib for this port. 
	 lldpXdot1dcbxConfigPFCTable,
	 lldpXdot1dcbxLocPFCBasicTable,
	 lldpXdot1dcbxLocPFCEnableTable,
	 lldpXdot1dcbxAdminPFCBasicTable,
 	 lldpXdot1dcbxAdminPFCEnableTable.
	 
	 Deletion of entry in the port table deletes the entry in this table and
	 all the entries in the above tables in the standatd DCBX mib for this port."
    ::= { dellNetPFCObjects 2 }

 dellNetPFCPortEntry    OBJECT-TYPE
    SYNTAX      DellNetPFCPortEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "An entry containing PFC control parameters and PFC information
	 for a particular port."
    INDEX  {dellNetPFCPortNumber}
    ::= { dellNetPFCPortTable 1 }

 DellNetPFCPortEntry ::= 
 SEQUENCE {
    dellNetPFCPortNumber	    InterfaceIndex,
    dellNetPFCAdminMode     	    DcbAdminMode,
    dellNetPFCDcbxOperState      DcbState,
    dellNetPFCDcbxStateMachine   DcbStateMachineType,
    dellNetPFCOperStatus         EnabledStatus,
    dellNetPFCClearTLVCounters   TruthValue,
    dellNetPFCTxTLVCounter	    Counter32,
    dellNetPFCRxTLVCounter	    Counter32,
    dellNetPFCRxTLVErrors	    Counter32
    }

 dellNetPFCPortNumber OBJECT-TYPE
    SYNTAX       InterfaceIndex
    MAX-ACCESS   not-accessible 
    STATUS       current
    DESCRIPTION
       "This indicates the interface identifier for which the PFC 
        configuration is applied." 
    ::= { dellNetPFCPortEntry 1 }

 dellNetPFCAdminMode    OBJECT-TYPE
    SYNTAX      DcbAdminMode
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display Admin mode for PFC feature on
         the given port.

         If mode is 'on(1)',PFC feature is enabled on this port.
         PFC configurations, either from this system or
         the remote system will take effect based on DCBX negotiations.  

         If mode is 'off(2)',PFC feature is disabled on this port. 
         Operational(local) parameters is same as Admin Configuration 
         Parameters. But Operational(local) parameters do not have any impact 
         in the system.dellNetPFCDcbxOperState becomes up if remote is also disabled

         The Operational(local) parameters do not have any impact in 
         the system if this object value is 'on(1)'
         and dellNetPFCModuleStatus is disabled. dellNetPFCDcbxOperState 
         will be in 'Off' State."
    DEFVAL { on }
    ::= { dellNetPFCPortEntry 2 }

 dellNetPFCDcbxOperState    OBJECT-TYPE
    SYNTAX      DcbState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display the current state of the
	 DCBX state machine for the PFC feature on the given port.

         If state is Off '(0)', then PFC Operational(local) parameters
	 will be same as PFC Admin Configuration Parameters and will
	 not have any impact in the system(hardware).

         If state is init '(1)', then PFC Operational(local) parameters
	 will be same as PFC Admin Configuration Parameters.

         If state is rxrecommended '(2)',then PFC Operational(local) parameters
	 will be same as PFC Remote Parameters.
        
	  internallypropagated '(3)', In this state all the Operational(local)
	 parameters for the feature will be same as the internal propagated 
	 information from the config source."
    ::= { dellNetPFCPortEntry 3 }

 dellNetPFCDcbxStateMachine    OBJECT-TYPE
    SYNTAX      DcbStateMachineType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to display the DCBX state machine 
	 type that is used by the PFC feature on the given port."
    ::= { dellNetPFCPortEntry 4 }

 dellNetPFCOperStatus      OBJECT-TYPE
    SYNTAX         EnabledStatus
    MAX-ACCESS     read-only
    STATUS         current
    DESCRIPTION
       "This object gives information on the operational status of PFC
        on the given port.
        Enabled(1) indicates PFC on the port is in sync with the remote
        and is operationally up.
        Disabled(2) indicates PFC on the port is operationally disabled."
    ::= { dellNetPFCPortEntry 5 }

 dellNetPFCClearTLVCounters    OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This object when set to TRUE, clears the following counters
         associated with a Port:
	    dellNetPFCTxTLVCounter,
	    dellNetPFCRxTLVCounter,
	    dellNetPFCRxTLVErrors.

         Setting this object to FALSE has no effect. 
         This object always returns FALSE when read."    
    DEFVAL { false }
    ::= { dellNetPFCPortEntry 6 }

 dellNetPFCTxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of PFC TLV
	 that are transmitted from this port. This counter will be 
	 incremented every time when there is PFC TLV is generated 
	 and transmitted to the LLDP."
    ::= { dellNetPFCPortEntry 7 }

 dellNetPFCRxTLVCounter    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of the number of PFC TLV
	 that are received in this port. This counter will be 
	 incremented every time when there is PFC TLV is received
	 from the LLDP."
    ::= { dellNetPFCPortEntry 8 }

 dellNetPFCRxTLVErrors    OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "This object is used to keep track of number of malformed TLVs received by PFC. 
         This counter will be incremented every time a PFC-TLV is dropped by PFC."
    ::= { dellNetPFCPortEntry 9 }

-- ****************************************************************************
--  dellNetDCbNotification subtree contains the objects related to notifications.
-- ****************************************************************************
 dellNetDCBTraps OBJECT IDENTIFIER ::= { dellNetDcbNotificationObjects 0 }
 dellNetDCBTrapObjects OBJECT IDENTIFIER ::= { dellNetDcbNotificationObjects 1 }

    dellNetDcbTrapPortNumber OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object refers to the Port number for which the DCBX feature
	 is enabled. And will be used in sending the feature port specific Traps."
    ::= { dellNetDCBTrapObjects 1 }

 dellNetDcbPeerUpStatus OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
        "This object refers to the DCBX Peer Up or Peer down status 
	 on the port.
	 If the value is 'true', then the DCBX Peer will be present
	 and UP. 
	 If the value is 'false', then the DCBX Peer will be absent
	 and DOWN."
    ::= { dellNetDCBTrapObjects 2 }
 
 dellNetETSModuleStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
        dellNetETSModuleStatus 
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated when there is a change in the ETS Module 
        status. This trap is generated only if dellNetETSGlobalEnableTrap 
        is enabled to send the trap."
    ::= { dellNetDCBTraps 1 }

 dellNetETSPortAdminStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetDcbTrapPortNumber,
            dellNetETSAdminMode
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated in the following conditions.
        Whenever there is a change in the ETS Admin status and the 
        dellNetETSGlobalEnableTrap is enabled to send the trap 
        for ETS Admin mode change. "
    ::= {dellNetDCBTraps 2 }   

 dellNetETSPortPeerStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetDcbTrapPortNumber,
	     dellNetDcbPeerUpStatus
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated in the following conditions.
        Whenever there is a change in the DCBX Peer Status and the 
        dellNetETSGlobalEnableTrap is enabled
        to send the trap for Peer Up or Peer Down."
    ::= {dellNetDCBTraps 3 }   

 dellNetETSPortDcbxOperStateTrap NOTIFICATION-TYPE
     OBJECTS  {
             dellNetDcbTrapPortNumber,
             dellNetETSDcbxOperState
     }
     STATUS   current
     DESCRIPTION
         "This trap is generated in the following conditions.
         Whenever there is a change in the ETS Operational State and the 
         dellNetETSGlobalEnableTrap is enabled
         to send the trap for ETS state machine state change."
     ::= {dellNetDCBTraps 4 }   

 dellNetPFCModuleStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetPFCModuleStatus 
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated when there is a change in the PFC Module 
        status is enabled. This trap is generated only if 
        dellNetPFCGlobalEnableTrap is enabled to send the trap."
    ::= { dellNetDCBTraps 5 }

 dellNetPFCPortAdminStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetDcbTrapPortNumber,
	     dellNetPFCAdminMode	
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated in the following conditions.
        Whenever there is a change in the PFC Admin Status and the 
        dellNetPFCGlobalEnableTrap is enabled
        to send the trap for PFC Admin Status change." 
    ::= {dellNetDCBTraps 6 }   

 dellNetPFCPortPeerStatusTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetDcbTrapPortNumber,
            dellNetDcbPeerUpStatus
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated in the following conditions.
        Whenever there is a change in the DCBX Peer Status and the 
        dellNetPFCGlobalEnableTrap is enabled
        to send the trap for Peer Up or Peer Down."
    ::= {dellNetDCBTraps 7 }   

 dellNetPFCPortDcbxOperStateTrap NOTIFICATION-TYPE
    OBJECTS  {
            dellNetDcbTrapPortNumber,
            dellNetPFCDcbxOperState
    }
    STATUS   current
    DESCRIPTION
        "This trap is generated in the following conditions.
        Whenever there is a change in the PFC Operational State and the 
        dellNetPFCGlobalEnableTrap is enabled
        to send the trap for PFC state machine state change."
    ::= {dellNetDCBTraps 8 }   

-- ############################################################################
-- Conformance information
-- ############################################################################

  dellNetDCBMibConformance     OBJECT IDENTIFIER
        ::=    { dellNetDcb 5 }

  dellNetDCBMibCompliances     OBJECT IDENTIFIER
        ::=    { dellNetDCBMibConformance 1 }

  dellNetDCBMibGroups     OBJECT IDENTIFIER
        ::=    { dellNetDCBMibConformance 2 }

-- ############################################################################
-- Compliance Statements 
-- ############################################################################

dellNetDCBMibComplianceRev1       MODULE-COMPLIANCE
  STATUS                       current
  DESCRIPTION 
      "The compliance statement for Dell Networking OS product which implement the 
      Dell Networking OS dcbx MIB. "
  MODULE 
  MANDATORY-GROUPS {
      dellNetDcbSystemObjectGroup,
      dellNetDcbxScalarsGroup,
      dellNetDCBXPortTableGroup,
      dellNetETSScalarsGroup,
      dellNetETSPortTableGroup,
      dellNetPFCScalarsGroup,
      dellNetPFCPortTableGroup,
      dellNetDCBNotificationObjectsGroup,
      dellNetDCBNotificationsGroup
  }
  ::= { dellNetDCBMibCompliances 1 }

dellNetDCBMibCompliance      MODULE-COMPLIANCE
  STATUS                  obsolete
  DESCRIPTION
    "The compliance statement for Dell Networking OS product which implement the
    Dell Networking OS dcb MIB. This module consists of the obsolete MIB objects."
  MODULE 
  MANDATORY-GROUPS {
      dellNetDcbObjectGroup
  }
  ::= { dellNetDCBMibCompliances 2 }

-- ##########################################################################
-- Units of conformance
-- ##########################################################################
 
dellNetDcbSystemObjectGroup OBJECT-GROUP
   OBJECTS {
           dellNetDcbPfcMinThreshold,
           dellNetDcbPfcMaxThreshold,
           dellNetDcbMaxPfcProfiles
   }
   STATUS            current
   DESCRIPTION 
       "This group represents a collection of objects providing the 
       DCB system information."
   ::= { dellNetDCBMibGroups 1 }
       
 dellNetDcbObjectGroup      OBJECT-GROUP
    OBJECTS { 
          dellNetDcbETSAdminStatus,
          dellNetDcbPFCAdminStatus
    }
    STATUS             obsolete
    DESCRIPTION 
        "This group represents a collection of objects providing the 
        information on the DCB control parameters for a particular port."
    ::= { dellNetDCBMibGroups 2 }

 dellNetDcbxScalarsGroup    OBJECT-GROUP
    OBJECTS {
          dellNetDcbxGlobalTraceLevel,
          dellNetDCBXGlobalVersion
    }
    STATUS             current
    DESCRIPTION 
        "This group represents the DCBX scalars in the DellNet DCB mib. "
    ::= { dellNetDCBMibGroups 3 }
 
 dellNetDCBXPortTableGroup     OBJECT-GROUP
    OBJECTS  {
          dellNetDCBXAdminStatus,
          dellNetDCBXAutoCfgPortRole,
          dellNetDCBXPortVersion,
          dellNetDCBXPortSupportedTLVs,
          dellNetDCBXPortConfigTLVsTxEnable,
          dellNetDCBXPortOperVersion,
          dellNetDCBXPortPeerMACaddress,
          dellNetDCBXPortCfgSource,
          dellNetDCBXOperStatus,
          dellNetDCBXPortMultiplePeerCount,
          dellNetDCBXPortPeerRemovedCount,
          dellNetDCBXPortPeerOperVersionNum,
          dellNetDCBXPortPeerMaxVersion,
          dellNetDCBXPortSeqNum,
          dellNetDCBXPortAckNum,
          dellNetDCBXPortPeerRcvdAckNum,
          dellNetDCBXPortTxCount,
          dellNetDCBXPortRxCount,
          dellNetDCBXPortErrorFramesCount
    }
    STATUS             current
    DESCRIPTION 
        "This group contains the collection of objects describing the 
        DCBX specific information on the particular port. "
    ::= { dellNetDCBMibGroups 4 }

 dellNetETSScalarsGroup  OBJECT-GROUP
    OBJECTS {
          dellNetETSSystemControl,
          dellNetETSModuleStatus,
          dellNetETSClearCounters,
          dellNetETSGlobalEnableTrap
    }
    STATUS            current
    DESCRIPTION
        "This object represents the collection of objects providing the ETS 
        Information on the system."
    ::= { dellNetDCBMibGroups 5 }

 dellNetETSPortTableGroup    OBJECT-GROUP
    OBJECTS  {
          dellNetETSAdminMode,
          dellNetETSDcbxOperState,
          dellNetETSDcbxStateMachine,
          dellNetETSOperStatus,
          dellNetETSClearTLVCounters,
          dellNetETSConfTxTLVCounter,
          dellNetETSConfRxTLVCounter,
          dellNetETSConfRxTLVErrors,
          dellNetETSRecoTxTLVCounter,
          dellNetETSRecoRxTLVCounter,
          dellNetETSRecoRxTLVErrors
    }
    STATUS            current
    DESCRIPTION
        "This object group represents the collection of objects providing 
        ETS specific status information on a specific port."
    ::= { dellNetDCBMibGroups 6 }

 dellNetPFCScalarsGroup     OBJECT-GROUP
    OBJECTS   {
         dellNetPFCSystemControl,
         dellNetPFCModuleStatus,
         dellNetPFCClearCounters,
         dellNetPFCGlobalEnableTrap
    }
    STATUS            current
    DESCRIPTION
        "This group represents a collection of objects providing the system
        information related to PFC."
    ::= { dellNetDCBMibGroups 7 }

 dellNetPFCPortTableGroup   OBJECT-GROUP 
    OBJECTS {
         dellNetPFCAdminMode,
         dellNetPFCDcbxOperState,
         dellNetPFCDcbxStateMachine,
         dellNetPFCOperStatus,
         dellNetPFCClearTLVCounters,
         dellNetPFCTxTLVCounter,
         dellNetPFCRxTLVCounter,
         dellNetPFCRxTLVErrors
    }
    STATUS            current
    DESCRIPTION
        "This group represents a collection of objects providing the
        PFC specific status information per port. "
    ::= { dellNetDCBMibGroups 8 }

 dellNetDCBNotificationObjectsGroup    OBJECT-GROUP
    OBJECTS {
         dellNetDcbTrapPortNumber,
         dellNetDcbPeerUpStatus
    }
    STATUS            current
    DESCRIPTION
        "This object group represents the collection of objects used by the 
        notification group dellNetDCBNotificationsGroup."
    ::= { dellNetDCBMibGroups 9 }
         
 dellNetDCBNotificationsGroup  NOTIFICATION-GROUP
    NOTIFICATIONS {
         dellNetETSModuleStatusTrap,
         dellNetETSPortAdminStatusTrap,
         dellNetETSPortPeerStatusTrap,
         dellNetETSPortDcbxOperStateTrap,
         dellNetPFCModuleStatusTrap,
         dellNetPFCPortAdminStatusTrap,
         dellNetPFCPortPeerStatusTrap,
         dellNetPFCPortDcbxOperStateTrap
    }
    STATUS               current
    DESCRIPTION
        "A collection on notification objects in the DellNet-DCB mib"
    ::= { dellNetDCBMibGroups 10 }


END

