--          *****************************
--          *                           *
--          *         ONEOS MIB         *
--          *                           *
--          *****************************
--
--          ONEOS_MIB_STD_V05.1.R005_E001
--
--          Creation date : 07/08/2010
--
--          update OneOs V5.1 capabilities 07/08/2010
--
     ONEACCESS-SHDSL-MIB DEFINITIONS ::= BEGIN 

     IMPORTS
		MODULE-IDENTITY, OBJECT-TYPE,Counter32,Counter64,Integer32
			FROM SNMPv2-SMI
--		MODULE-COMPLIANCE, OBJECT-GROUP
--			FROM SNMPv2-CONF
		ifIndex
			FROM IF-MIB
		oacExpIMSystem	  
			FROM ONEACCESS-GLOBAL-REG
        hdsl2ShdslSpanStatusEntry,hdsl2ShdslEndpointCurrEntry,hdsl2ShdslSpanConfProfileEntry
			FROM HDSL2-SHDSL-LINE-MIB;

     oacSHDSLMIBModule MODULE-IDENTITY
	 LAST-UPDATED    "201106150000Z"
        ORGANIZATION    " OneAccess "
         CONTACT-INFO
           "Pascal KESTELOOT
            Postal: ONE ACCESS
                    381 Avenue du General de Gaulle
                    92140 Clamart, France
		    FRANCE

            Tel: (+33) 01 41 87 70 00
            Fax: (+33) 01 41 87 74 00

            E-mail: pascal.kesteloot@oneaccess-net.com"

         DESCRIPTION
                        "Contact updated"
        REVISION        "201106150000Z"

        DESCRIPTION
              "This MIB module describes private extensions to the RFC4319 MIB."
--  Revision history 
        REVISION      "201008200001Z"
        DESCRIPTION   "Added oacSHDSLSpanConfProfileEocManagement,
                       oacSHDSLSpanConfProfileEocStatusPollDelay and
                       oacSHDSLSpanConfProfileEocStatusPollInterval."
        REVISION      "201007300001Z"
        DESCRIPTION   "Added oacSHDSLSpanConfProfileTable."
        REVISION      "201007080001Z"
        DESCRIPTION   "Initial version."
	
	::= { oacExpIMSystem 3 }

oacSHDSLObjects OBJECT IDENTIFIER ::= { oacSHDSLMIBModule 1 }


oacSHDSLSpanStatusTable OBJECT-TYPE
      SYNTAX     SEQUENCE OF OacSHDSLSpanStatusEntry
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
        "This table provides overall status information of
         HDSL2/SHDSL spans.  This table contains live data from
         equipment.  As such, it is NOT persistent."
      ::= { oacSHDSLObjects 2 }

 oacSHDSLSpanStatusEntry OBJECT-TYPE
      SYNTAX      OacSHDSLSpanStatusEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
        "An entry in the oacSHDSLSpanStatusTable.  Each entry
         represents the complete span in a single HDSL2/SHDSL line.
         It is indexed by the ifIndex of the associated HDSL2/SHDSL
         line."
      AUGMENTS { hdsl2ShdslSpanStatusEntry }
      ::= { oacSHDSLSpanStatusTable 1 }

   OacSHDSLSpanStatusEntry ::=
      SEQUENCE
      {
      oacSHDSLSpanStatusUpDown        		Counter32,
	  oacSHDSLSpanStatusCurrStatus			OCTET STRING,
	  oacSHDSLSpanStatusCurrShowtimeStart	Counter32,
	  oacSHDSLSpanStatusCurrCellDelin		Counter32,
	  oacSHDSLSpanStatusCurrCRCanomalies	Counter32,
	  oacSHDSLSpanStatusCurrHECErrors		Counter32,
	  oacSHDSLSpanStatusCurrRxCells			Counter32,
	  oacSHDSLSpanStatusCurrTxCells			Counter32,
	  oacSHDSLSpanStatusCurrRxDrops			Counter32,
	  oacSHDSLSpanStatusCurrES				Counter32,
	  oacSHDSLSpanStatusCurrSES				Counter32,
	  oacSHDSLSpanStatusCurrLOSWS			Counter32,
      oacSHDSLSpanStatusCurrUAS             Counter32,
      oacSHDSLSpanStatusCurrConstellation   INTEGER
      }

   oacSHDSLSpanStatusUpDown OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the Global Up/Down Counter for the span."
      ::= { oacSHDSLSpanStatusEntry 1 }

   oacSHDSLSpanStatusCurrStatus OBJECT-TYPE
      SYNTAX      OCTET STRING(SIZE(30))
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current G.SHDSL Status."
      ::= { oacSHDSLSpanStatusEntry 2 }
	  
   oacSHDSLSpanStatusCurrShowtimeStart OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current Showtime Start."
      ::= { oacSHDSLSpanStatusEntry 3 }

   oacSHDSLSpanStatusCurrCellDelin OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current Cell Delin counter."
      ::= { oacSHDSLSpanStatusEntry 4 }
	  
   oacSHDSLSpanStatusCurrCRCanomalies OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current CRC counter."
      ::= { oacSHDSLSpanStatusEntry 5 }

   oacSHDSLSpanStatusCurrHECErrors OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current HEC counter."
      ::= { oacSHDSLSpanStatusEntry 6 }
	  
   oacSHDSLSpanStatusCurrRxCells OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current Rx Cells counter."
      ::= { oacSHDSLSpanStatusEntry 7 }

   oacSHDSLSpanStatusCurrTxCells OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current Tx Cells counter."
      ::= { oacSHDSLSpanStatusEntry 8 }
	  
   oacSHDSLSpanStatusCurrRxDrops OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current Rx Drops counter."
      ::= { oacSHDSLSpanStatusEntry 9 }

   oacSHDSLSpanStatusCurrES OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current ES counter."
      ::= { oacSHDSLSpanStatusEntry 10 }
	  
   oacSHDSLSpanStatusCurrSES OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current SES counter."
      ::= { oacSHDSLSpanStatusEntry 11 }

   oacSHDSLSpanStatusCurrLOSWS OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current LOSWS counter."
      ::= { oacSHDSLSpanStatusEntry 12 }
	  
   oacSHDSLSpanStatusCurrUAS OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "Contains the current UAS counter."
      ::= { oacSHDSLSpanStatusEntry 13 }

   oacSHDSLSpanStatusCurrConstellation OBJECT-TYPE
      SYNTAX      INTEGER 
                  {
                  tcPam16(2),
                  tcPam32(3)
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current constellation (line coding) for the span."
      ::= { oacSHDSLSpanStatusEntry 14 }


oacSHDSLEndpointCurrTable OBJECT-TYPE
	SYNTAX SEQUENCE OF OacSHDSLEndpointCurrEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION 
		"This table contains current status and performance information
         for segment endpoints in HDSL2/SHDSL lines.  As with other
         tables in this MIB module indexed by ifIndex, entries in this
         table MUST be maintained in a persistent manner."
	 ::= { oacSHDSLObjects 5 }

oacSHDSLEndpointCurrEntry OBJECT-TYPE
    SYNTAX     OacSHDSLEndpointCurrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the oacSHDSLEndpointCurrTable."
    AUGMENTS {hdsl2ShdslEndpointCurrEntry}
    ::= { oacSHDSLEndpointCurrTable 1 }

 OacSHDSLEndpointCurrEntry ::=
    SEQUENCE {
        oacSHDSLEndpointCurrAtn              	Integer32,
	oacSHDSLEndpointCurrSnrMgn		Integer32,
	oacSHDSLEndpointCurrTxPwr		Integer32,
	oacSHDSLEndpointCurrRxGain					Integer32,
    oacSHDSLEndpointCurrMaxAttainableLineRate	Integer32,
	oacSHDSLEndpointCurrCommands				Integer32,
	oacSHDSLEndpointCurrResponses				Integer32,
	oacSHDSLEndpointCurrdiscardedCommands		Integer32,
    oacSHDSLEndpointCurrerroredCommands       Integer32,
	oacSHDSLEndpointCurrReceivedFrames		Integer32,
	oacSHDSLEndpointCurrBadTransparency		Integer32,
	oacSHDSLEndpointCurrBadFCS				Integer32,
	oacSHDSLEndpointCurrEOCStatus				OCTET STRING
     }

   oacSHDSLEndpointCurrAtn OBJECT-TYPE
      SYNTAX      Integer32(-1270..1280)
      UNITS       "dB/10"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current loop attenuation for this endpoint as reported in
         a Network or Customer Side Performance Status message. In tenths of dB."
      ::= { oacSHDSLEndpointCurrEntry 1 }

  oacSHDSLEndpointCurrSnrMgn OBJECT-TYPE
      SYNTAX      Integer32(-1270..1280)
      UNITS       "dB/10"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current SNR margin for this endpoint as reported in a
         Status Response/SNR message. In tenths of dB."
      ::= { oacSHDSLEndpointCurrEntry 2 }

 oacSHDSLEndpointCurrTxPwr OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "dB/10"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current transmit power for this endpoint. In tenths of dB."
      ::= { oacSHDSLEndpointCurrEntry 3 }

 oacSHDSLEndpointCurrRxGain OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "dB/10"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current receiver gain for this endpoint. In tenths of dB."
      ::= { oacSHDSLEndpointCurrEntry 4 }

   oacSHDSLEndpointCurrMaxAttainableLineRate OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Max Attainable LineRate for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 5 }

  oacSHDSLEndpointCurrCommands OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Commands for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 6 }

 oacSHDSLEndpointCurrResponses OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Responses for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 7 }

 oacSHDSLEndpointCurrdiscardedCommands OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current discarded Commands for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 8 }
	  
 oacSHDSLEndpointCurrerroredCommands OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current errored Commands for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 9 }
	  
   oacSHDSLEndpointCurrReceivedFrames OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Received Frames for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 10 }

  oacSHDSLEndpointCurrBadTransparency OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Bad Transparency for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 11 }

 oacSHDSLEndpointCurrBadFCS OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current Bad FCS for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 12 }

 oacSHDSLEndpointCurrEOCStatus OBJECT-TYPE
      SYNTAX      OCTET STRING(SIZE(50))
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current EOC Status for this endpoint."
      ::= { oacSHDSLEndpointCurrEntry 13 }
	  	 
	  --
	  --
oacSHDSLEndpointCurrretrainTable OBJECT-TYPE
	SYNTAX SEQUENCE OF OacSHDSLEndpointCurrretrainEntry
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION 
		"This table contains current status and performance information
         for segment endpoints in HDSL2/SHDSL lines.  As with other
         tables in this MIB module indexed by ifIndex, entries in this
         table MUST be maintained in a persistent manner."
	 ::= { oacSHDSLObjects 7 }
oacSHDSLEndpointCurrretrainEntry OBJECT-TYPE
    SYNTAX     OacSHDSLEndpointCurrretrainEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Defines an entry in the oacSHDSLEndpointCurrretrainTable."
    AUGMENTS {hdsl2ShdslEndpointCurrEntry}
    ::= { oacSHDSLEndpointCurrretrainTable 1 }

 OacSHDSLEndpointCurrretrainEntry ::=
    SEQUENCE {
    oacSHDSLEndpointCurrretrainSQPAIR        Integer32,
    oacSHDSLEndpointCurrretrainSQLINE       Integer32,
	oacSHDSLEndpointCurrretrainCRCPAIR		 Integer32,
	oacSHDSLEndpointCurrretrainCRCLINE		 Integer32,
    oacSHDSLEndpointCurrretrainFsyncPAIR     Integer32,
	oacSHDSLEndpointCurrretrainFsyncLINE	 Integer32,
    oacSHDSLEndpointCurrretrainFSyncSQPAIR  Integer32,
	oacSHDSLEndpointCurrretrainFSyncSQLINE	 Integer32
     }
   oacSHDSLEndpointCurrretrainSQPAIR OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "SQPAIR"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain SQ for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 1 }
	  
   oacSHDSLEndpointCurrretrainSQLINE OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "SQLINE"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain SQ for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 2 }

   oacSHDSLEndpointCurrretrainCRCPAIR OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "CRCPAIR"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain CRC for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 3 }
	
   oacSHDSLEndpointCurrretrainCRCLINE OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "CRCLINE"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain CRC for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 4 }
	  
   oacSHDSLEndpointCurrretrainFsyncPAIR OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "FsyncPAIR"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain Fsync for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 5 }

   oacSHDSLEndpointCurrretrainFsyncLINE OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "FsyncLINE"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain Fsync for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 6 }
	  
   oacSHDSLEndpointCurrretrainFSyncSQPAIR OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "FSync&SQPAIR"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain FSync&SQ for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 7 }

   oacSHDSLEndpointCurrretrainFSyncSQLINE OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "FSync&SQLINE"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current retrain FSync&SQ for this endpoint as reported in
         a Network or Customer Side Performance Status message."
      ::= { oacSHDSLEndpointCurrretrainEntry 8 }
	  
-- OneAccess SHDSL MIB Trap Definitions
oacSHDSLTraps      OBJECT IDENTIFIER ::= { oacSHDSLMIBModule 2 }
oacSHDSLTrapPrefix OBJECT IDENTIFIER ::= { oacSHDSLTraps 0 }

oacSHDSLHardDownTrap NOTIFICATION-TYPE
    STATUS             current
    DESCRIPTION
            "this notification indicate that the shdsl line speed is lower than the threshold configured in efm interface. 
  as consequence, the interface ethernet which the hard-down option is enable will be shutdown, 
it will be UP if the shdsl line recovered the good linerate."
   ::= { oacSHDSLTrapPrefix 1 }	 
 
--   ****************************   --
--   oacSHDSLSpanConfProfileTable   --
--   ****************************   --
oacSHDSLSpanConfProfileTable OBJECT-TYPE
      SYNTAX SEQUENCE OF OacSHDSLSpanConfProfileEntry
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
        "This table supports definitions of span configuration
         profiles for SHDSL lines.  This table MUST be maintained
         in a persistent manner"
     ::= { oacSHDSLObjects 10 }

 oacSHDSLSpanConfProfileEntry OBJECT-TYPE
      SYNTAX      OacSHDSLSpanConfProfileEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
        "Each entry corresponds to a single span configuration
         profile.  Each profile contains a set of span configuration
         parameters.  The configuration parameters in a profile are
         applied to those lines referencing that profile (see the
         hdsl2ShdslSpanConfProfile object).  "
      AUGMENTS {hdsl2ShdslSpanConfProfileEntry}
    ::= { oacSHDSLSpanConfProfileTable 1 }

  OacSHDSLSpanConfProfileEntry ::=
      SEQUENCE 
      {
      oacSHDSLSpanConfProfileConstellation         INTEGER,
      oacSHDSLSpanConfProfileAutoConfig            INTEGER,
      oacSHDSLSpanConfProfileCaplist               INTEGER,
      oacSHDSLSpanConfProfileEfmAggregation        INTEGER,
      oacSHDSLSpanConfProfileCrcCheck              Integer32,
      oacSHDSLSpanConfProfileMeansqCheck           Integer32,
      oacSHDSLSpanConfProfileMeansqThreshold       Integer32,
      oacSHDSLSpanConfProfileLineProbing           INTEGER,
      oacSHDSLSpanConfProfileEocManagement         INTEGER,
      oacSHDSLSpanConfProfileEocStatusPollDelay    Integer32,
      oacSHDSLSpanConfProfileEocStatusPollInterval Integer32
      }

   oacSHDSLSpanConfProfileConstellation OBJECT-TYPE
      SYNTAX      INTEGER
                  {  
                  auto(1),
                  tcPam16(2),
                  tcPam32(3)
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured constellation (line coding) for the span.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
         annex ... tc-pam <value>"
      ::= { oacSHDSLSpanConfProfileEntry 1 }

   oacSHDSLSpanConfProfileAutoConfig OBJECT-TYPE
      SYNTAX      INTEGER
                  {
                  enabled(1),
                  disabled(2)
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured auto configuration mode (enabled or disabled) for the span.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            autoconfig / no autoconfig"
      ::= { oacSHDSLSpanConfProfileEntry 2 }


   oacSHDSLSpanConfProfileCaplist OBJECT-TYPE
      SYNTAX      INTEGER
                  {
                  newstyle(1),
                  oldstyle(2),
                  auto(3)                 
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured capability list style for the span.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            caplist <value>"
      ::= { oacSHDSLSpanConfProfileEntry 3 }

   oacSHDSLSpanConfProfileEfmAggregation OBJECT-TYPE
      SYNTAX      INTEGER
                  {
                  disabled(1),
                  auto(2),
                  negotiated(3),
                  static(4)                 
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured efm aggregation mode for the span.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            efmaggregation <value>"
      ::= { oacSHDSLSpanConfProfileEntry 4 }

   oacSHDSLSpanConfProfileCrcCheck OBJECT-TYPE
      SYNTAX      Integer32(0..30)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured numbered of consecutive seconds with crc errors after which the link will be retrained.
         If the value is set to 0, than no retrain will occur based on crc errors.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            value 0 :         crc no 
            all other values: crc check <value> "
      ::= { oacSHDSLSpanConfProfileEntry 5 }

   oacSHDSLSpanConfProfileMeansqCheck OBJECT-TYPE
      SYNTAX      Integer32(0..30)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured numbered of consecutive seconds where the noise margin is below 
         the configured threshold (oacSHDSLSpanConfProfileMeansqThreshold) after which the link will be retrained.
         If the value is set to 0, than no retrain will occur based on noise margin verification.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            value 0 :         meansq no 
            all other values: meansq check <value> "
      ::= { oacSHDSLSpanConfProfileEntry 6 }

   oacSHDSLSpanConfProfileMeansqThreshold OBJECT-TYPE
      SYNTAX      Integer32(-2..10)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured threshold (in dB) for retrain check based on the noise margin.
        If the noise margin drops below the configured threshold for the configured time
        (oacSHDSLSpanConfProfileMeansqCheck) than the link will be retrained.
         Corresponds to cli command (controller shdsl 0, dsl-group 0):
            meansq check <time> <value> "
      ::= { oacSHDSLSpanConfProfileEntry 7 }

   oacSHDSLSpanConfProfileLineProbing OBJECT-TYPE
      SYNTAX      INTEGER
                  {
                  adaptive(1), 
                  normal(2)
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The configured linprobing mechanism. 
         - normal corresponds to the standard line probing (pmms) as defined in the standard (G.991.2).
         - adaptive has to be used in situations where there is cross-talk between the lines of the same span.
           A propriatary algorithm will be activated that will limit the maximum speed if the normal line probing
           mechanism cannot reach a stable sync due to it's limitations (cross-talk is not taken into account in the 
           standard line probing mechanism). The disadvantage of the adaptive mode is that it can take a long time 
           before a stable sync is reached.
        
        Corresponds to cli command (controller shdsl 0, dsl-group 0):
            lineprobing <value> "
      ::= { oacSHDSLSpanConfProfileEntry 8 }

   oacSHDSLSpanConfProfileEocManagement OBJECT-TYPE
      SYNTAX      INTEGER
                  {
                  enabled(1),
                  disabled(2)
                  }
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "This object enables/disables the EOC management of the SHDSL line in this unit."

      DEFVAL      { enabled }
      ::= { oacSHDSLSpanConfProfileEntry 9 }

   oacSHDSLSpanConfProfileEocStatusPollDelay OBJECT-TYPE
      SYNTAX      Integer32(0..29)
      UNITS       "seconds"
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "The delay in seconds after the start of the full quarter of an hour when an EOC full status request
        is sent to the devices in the span. Periodically after this start point full status request will
        be sent with a configured interval (oacSHDSLSpanConfProfileEocStatusPollInterval)."

      DEFVAL      { 0 }
      ::= { oacSHDSLSpanConfProfileEntry 10 }

   oacSHDSLSpanConfProfileEocStatusPollInterval OBJECT-TYPE
      SYNTAX      Integer32(30|60|90|120)
      UNITS       "seconds"
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "The delay in seconds between 2 EOC full status requests to the same device in the shdsl span."

      DEFVAL      { 30 }
      ::= { oacSHDSLSpanConfProfileEntry 11 }

END

