-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename:   PRVT-RSVP-MIB.mib
-- ** Project:    T-Metro Switches.
-- ** Purpose:    Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
--                             WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information.  This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM.  Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-RSVP-MIB DEFINITIONS ::= BEGIN

  IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE,
      Integer32, Unsigned32, IpAddress
                                        FROM SNMPv2-SMI

      MODULE-COMPLIANCE, OBJECT-GROUP   FROM SNMPv2-CONF

      TEXTUAL-CONVENTION, RowStatus, TruthValue
                                        FROM SNMPv2-TC
      InterfaceIndexOrZero              FROM IF-MIB
      InetAddressIPv6                   FROM INET-ADDRESS-MIB
        mpls				 		FROM PRVT-CR-LDP-MIB;



  prvtRsvp MODULE-IDENTITY
       LAST-UPDATED "200804140000Z" 
      ORGANIZATION "BATM Advanced Communication"
      CONTACT-INFO
                   " BATM/Telco Systems Support team
					Email: 
				For North America: techsupport@telco.com
				For North Europe: support@batm.de, info@batm.de
				For the rest of the world: techsupport@telco.com"      
				DESCRIPTION  "The MIB module for management of the PRVT-RSVP
                    product."

   -- Revision history.  
    REVISION     "200804140000Z"
    DESCRIPTION
        "Added range constraints to
         prvtRsvpProductLocalRepairDelay, prvtRsvpProductRefreshInterval,
         prvtRsvpProductNotifyRRInterval, prvtRsvpProductNotifyRRLimit,
         prvtRsvpProductInitPathRRInterval, prvtRsvpProductInitPathRRLimit."

  
    REVISION     "200606020000Z"
    DESCRIPTION
        "Initial version."

  ::= { mpls 7 }

  prvtRsvpObjects OBJECT IDENTIFIER ::= { prvtRsvp 1 } -- tables

-- Textual conventions

  PrvtRsvpAdminStatus ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The desired administrative state of an RSVP
                   entity."
      SYNTAX      INTEGER {
                      up(1),
                      down(2)
                  }

  PrvtRsvpOperStatus ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The current operational state of an RSVP entity."
      SYNTAX      INTEGER {
                      up(1),          -- active
                      down(2),        -- inactive
                      goingUp(3),     -- activating
                      goingDown(4),   -- deactivating
                      actFailed(5)    -- activation failed
                  }

  PrvtRsvpIndex ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The index value identifying an RSVP entity."
      SYNTAX      Unsigned32

  PrvtRsvpDiagReqIndex ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION
          "The index value identifying an RSVP session that is being
           diagnosed."
      SYNTAX      Unsigned32

  PrvtRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION
          "The index value identifying a node within an RSVP session that is
           being diagnosed."
      SYNTAX      Unsigned32

  PrvtRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The type of a node in a session that is being diagnosed."
      SYNTAX      INTEGER {
                      missing(1),     -- no information received
                      ingress(2),     -- the ingress node
                      transit(3),     -- an intermediate node
                      egress(4)       -- the egress node
                  }

-- End of textual conventions


-- RSVP entity table
-- This table is used to create and manage RSVP entities.

  prvtRsvpProductTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF PrvtRsvpProductEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The table of RSVP entities."
     ::= { prvtRsvpObjects 1 }

  prvtRsvpProductEntry OBJECT-TYPE
      SYNTAX      PrvtRsvpProductEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Each entry represents an RSVP entity."
      INDEX { prvtRsvpProductIndex }
     ::= { prvtRsvpProductTable 1 }

  PrvtRsvpProductEntry ::= SEQUENCE {
          prvtRsvpProductIndex                   PrvtRsvpIndex,
          prvtRsvpProductASNumber                Integer32,
          prvtRsvpProductSenderTTL               Integer32,
          prvtRsvpProductMinTimerPeriod          Integer32,
          prvtRsvpProductAPIIfIndex              InterfaceIndexOrZero,
          prvtRsvpProductAPIAddress              OCTET STRING,
          prvtRsvpProductAPIRefreshInterval      Integer32,
          prvtRsvpProductLocalRepairDelay        Integer32,
          prvtRsvpProductRefreshInterval         Integer32,
          prvtRsvpProductRefreshMultiple         Integer32,
          prvtRsvpProductRfrshSlewDenom          Integer32,
          prvtRsvpProductRfrshSlewNumerator      Integer32,
          prvtRsvpProductBlockadeMultiple        Integer32,
          prvtRsvpProductSocketBufPoolSize       Integer32,
          prvtRsvpProductSwitchBufPoolSize       Integer32,
          prvtRsvpProductTeMibBufPoolSize        Integer32,
          prvtRsvpProductRoutingBufPoolSize      Integer32,
          prvtRsvpProductLSPSetupPriority        Integer32,
          prvtRsvpProductLSPHoldingPriority      Integer32,
          prvtRsvpProductAdminStatus             PrvtRsvpAdminStatus,
          prvtRsvpProductOperStatus              PrvtRsvpOperStatus,
          prvtRsvpProductRowStatus               RowStatus,
          prvtRsvpProductLsrIndex                Unsigned32,
          prvtRsvpProductTeMibIndex              Unsigned32,
          prvtRsvpProductMultiStackSupport       Integer32,
          prvtRsvpProductUseHopByHop             TruthValue,
          prvtRsvpProductUseNotify               TruthValue,
          prvtRsvpProductNotifyRRDecay           Integer32,
          prvtRsvpProductNotifyRRInterval        Integer32,
          prvtRsvpProductNotifyRRLimit           Integer32,
          prvtRsvpProductAllowIPEncap            TruthValue,
          prvtRsvpProductProtocolExtensions      BITS,
          prvtRsvpProductPSRFlags                BITS,
          prvtRsvpProductInitPathRRDecay         Integer32,
          prvtRsvpProductInitPathRRInterval      Integer32,
          prvtRsvpProductInitPathRRLimit         Integer32,
          prvtRsvpProductEnableUni               TruthValue,
          prvtRsvpProductRestartCapable          TruthValue,
          prvtRsvpProductRestartTime             Unsigned32,
          prvtRsvpProductRecoveryTime            Unsigned32,
          prvtRsvpProductMinPeerRestart          Integer32,
          prvtRsvpProductGracefulDelTimeout      Integer32,
          prvtRsvpProductEgressDelBehavior       INTEGER,
          prvtRsvpProductEnabUniConnSplicing     TruthValue,
          prvtRsvpProductFastRerouteCaps         BITS,
          prvtRsvpProductFastRroutBkpRtryInt     Integer32,
          prvtRsvpProductErrorActionFlags        BITS,
          prvtRsvpProductEnableNni               INTEGER,
          prvtRsvpProductBehaviorFlags           BITS,
          prvtRsvpProductLabelSetStyle           INTEGER,
          prvtRsvpProductLabelSetOperStatus      INTEGER,
          prvtRsvpProductLabelSetTrapEnable      TruthValue,
          prvtRsvpProductLabelSetChngAct         Integer32,
          prvtRsvpProductExtPrtAdminStatus       PrvtRsvpAdminStatus,
          prvtRsvpProductUniIncSonetProfile      Unsigned32,
          prvtRsvpProductFrrFacAdminStatus       PrvtRsvpAdminStatus,
          prvtRsvpProductFrrFacOperStatus        PrvtRsvpOperStatus,
          prvtRsvpProductIpv6AdminStatus         PrvtRsvpAdminStatus,
          prvtRsvpProductIpv6OperStatus          PrvtRsvpOperStatus,
          prvtRsvpProductAPIIpv6Address          InetAddressIPv6
      }

  prvtRsvpProductIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpIndex
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of this prvtRsvpProductEntry.  This is the
           HAF entity index passed on the entity create parameters."
     ::= { prvtRsvpProductEntry 1 }

  prvtRsvpProductASNumber OBJECT-TYPE
      SYNTAX      Integer32 (0..65535)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The number identifying the autonomous system (AS) to which
        this node belongs."
      DEFVAL { 1 }
     ::= { prvtRsvpProductEntry 2 }

  prvtRsvpProductSenderTTL OBJECT-TYPE
      SYNTAX      Integer32 (0..255)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The TTL set on messages originating at this node.  A value
        of 0 indicates this number is determined by other means."
      DEFVAL { 0 }
     ::= { prvtRsvpProductEntry 3 }

  prvtRsvpProductMinTimerPeriod OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The minimum granularity to allow an internal timer to be
        set in the PRVT-RSVP product code."
      DEFVAL { 200 }
     ::= { prvtRsvpProductEntry 4 }

  prvtRsvpProductAPIIfIndex OBJECT-TYPE
      SYNTAX      InterfaceIndexOrZero
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "Management assigned interface identifier for the (internal) LRAPI
        interface between RSVP and TE-MIB components.  This must be unique in
        the interface index namespace of the node - it MUST not match any real
        interface index.
        It is recommended that this is set to zero or 0x7FFFFFFF."
      DEFVAL { 2147483647 }
     ::= { prvtRsvpProductEntry 5 }

  prvtRsvpProductAPIAddress OBJECT-TYPE
      SYNTAX      OCTET STRING (SIZE(4..16))
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "Management assigned IP address used to identify the (internal) LRAPI
        interface between RSVP and TE-MIB components.
        The configured API address MUST not be a real address in the network.
        It is recommended that this is set to a non-zero reserved address
        value, such as 224.0.0.0.
        If multi-stack support is set to PHOP, this address must be unique for
        each RSVP stack in the node.
        The same address(es) can be used on all nodes in the network."
      DEFVAL { 'E0000000'H } -- 224.0.0.0
     ::= { prvtRsvpProductEntry 6 }

  prvtRsvpProductAPIRefreshInterval OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "This field is now deprecated."
      DEFVAL { 30000 }
     ::= { prvtRsvpProductEntry 7 }

  prvtRsvpProductLocalRepairDelay OBJECT-TYPE
      SYNTAX      Integer32 (-1 | 1000..2147483647)
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "This object is used to set the delay between detection of a
        path error and instigation of local repair procedures.  This
        allows local routing updates to converge.
        A value of -1 indicates that local
        repair procedures should not take place, but that the error
        should be propagated upstream.
        Where FRR capabilities are supported at this node
        local_repair_delay must be set to -1."


      DEFVAL { 1000 }
     ::= { prvtRsvpProductEntry 8 }

  prvtRsvpProductRefreshInterval OBJECT-TYPE
      SYNTAX      Integer32 (1000..2147483647)
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "This RSVP value, R,  which is used to set the average
        interval between refresh path and resv messages.
        Note : If values for the if_refresh_interval and if_refresh_multiple
        are configured such that the following inequality is not obeyed :
        6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF.
        Then the time-to-die for the path value will be set to its maximum
        value and it is probable that the lsp will time out before a refresh
        arrives."
      DEFVAL { 30000 }
     ::= { prvtRsvpProductEntry 9 }

  prvtRsvpProductRefreshMultiple OBJECT-TYPE
      SYNTAX      Integer32 (1..214783647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The RSVP value, K, which is the number of unresponded Path
        or Resv refresh attempts which must be made, spaced by
        the refresh interval before the state is deemed to have
        timed out.
        Note : See note in prvtRsvpProductRefreshInterval above."
      DEFVAL { 3 }
     ::= { prvtRsvpProductEntry 10 }

  prvtRsvpProductRfrshSlewDenom OBJECT-TYPE
      SYNTAX      Integer32 (1..214783647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The denominator of the fraction, SlewMax, which is the
        maximum allowable increase in the refresh interval, R, to
        prevent state timeout while changing R.  R is increased by
        this fraction until it reaches the new desired value."
      DEFVAL { 10 }
     ::= { prvtRsvpProductEntry 11 }

  prvtRsvpProductRfrshSlewNumerator OBJECT-TYPE
      SYNTAX      Integer32 (1..214783647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The numerator of the fraction, SlewMax, which is the maximum
        allowable increase in the refresh interval, R, to prevent
        state timeout while changing R.  R is increased by this
        fraction until it reaches the new desired value."
      DEFVAL { 3 }
     ::= { prvtRsvpProductEntry 12 }

  prvtRsvpProductBlockadeMultiple OBJECT-TYPE
      SYNTAX      Integer32 (1..214783647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The RSVP value, Kb, which is the number of refresh timeout
        periods after which blockade state is deleted."
      DEFVAL { 2 }
     ::= { prvtRsvpProductEntry 13 }

  prvtRsvpProductSocketBufPoolSize OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The number of pre-reserved buffers available for sending
        sockets data.  This is used to pace the sockets data flows."
      DEFVAL { 8 }
     ::= { prvtRsvpProductEntry 14 }

  prvtRsvpProductSwitchBufPoolSize OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The number of pre-reserved buffers available for programming
        the switch.  This is used to ensure programming operations do
        not fail in buffer shortage conditions."
      DEFVAL { 8 }
     ::= { prvtRsvpProductEntry 15 }

  prvtRsvpProductTeMibBufPoolSize OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The number of pre-reserved buffers available for signalling
        TE-MIB.  This is used to ensure signals are not lost in buffer
        shortage conditions."
      DEFVAL { 8 }
     ::= { prvtRsvpProductEntry 16 }

  prvtRsvpProductRoutingBufPoolSize OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The number of pre-reserved buffers available for route
        queries.  This is used to ensure re-routing of many LSPs does
        not fail in buffer shortage conditions."
      DEFVAL { 8 }
     ::= { prvtRsvpProductEntry 17 }

  prvtRsvpProductLSPSetupPriority OBJECT-TYPE
      SYNTAX      Integer32 (0..7)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The setup priority to apply to LSPs which are not
        signalling this parameter.  0 represents the highest
        priority, 7 the lowest.  The value of this object must be
        numerically more or equal (so lower or equal priority)
        than the value of the holding priority object."
      DEFVAL { 4 }
     ::= { prvtRsvpProductEntry 18 }

  prvtRsvpProductLSPHoldingPriority OBJECT-TYPE
      SYNTAX      Integer32 (0..7)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
      "The holding priority to apply to LSPs which are not
       signalling this parameter.  0 represents the highest
       priority, 7 the lowest.  The value of this object must be
       numerically less or equal (so higher or equal priority)
       than the value of the holding priority object."
      DEFVAL { 3 }
     ::= { prvtRsvpProductEntry 19 }

  prvtRsvpProductAdminStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpAdminStatus
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The desired administrative state of the RSVP entity."
      DEFVAL { up }
     ::= { prvtRsvpProductEntry 20 }

  prvtRsvpProductOperStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpOperStatus
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
       "The current operational state of this instance of PRVT-RSVP."
     ::= { prvtRsvpProductEntry 21 }

  prvtRsvpProductRowStatus OBJECT-TYPE
      SYNTAX      RowStatus
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "Used to create and delete a PRVT-RSVP Product Table entry.
        When this object is set to 'active', only the
        prvtRsvpProductAdminStatus object in the row may be modified."
      DEFVAL { active }
     ::= { prvtRsvpProductEntry 22 }

  prvtRsvpProductLsrIndex OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The index of the PRVT-LMGR product instance which this
        PRVT-RSVP is to join to as its LDB interface provider.  If
        this value is not specified, or the value of this object
        is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
        Lsr index when joining on the LDB interface."
      DEFVAL { 0 }
     ::= { prvtRsvpProductEntry 23 }

  prvtRsvpProductTeMibIndex OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The index of the TE-MIB product instance which this
        PRVT-RSVP is to join to as its LRA interface provider. If
        this value is not specified, or the value of this object
        is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
        TeMib Index when joining on the LRA interface."
       DEFVAL { 0 }
      ::= { prvtRsvpProductEntry 24 }

  prvtRsvpProductMultiStackSupport OBJECT-TYPE
      SYNTAX      Integer32 (1..3)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate if multiple RSVP stacks are present
         in the same system as the current one and, if so, how
         they are supported.  If set to PHOP, Path messages are
         forwarded to PRVT-RSVP with the Previous Hop value set as
         the hop prior to the incoming interface, not as the next
         hop interface as normal.  If set to LIH, the hardware
         location of the current RSVP stack is used as the LIH in
         the HOP object."
      DEFVAL { 1 }
     ::= { prvtRsvpProductEntry 25 }

  prvtRsvpProductUseHopByHop OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate that PRVT-RSVP should use the hop by hop
         addressing scheme for PATH and PATH-TEAR messages it
         sends.  If set then the IP addresses used in the IP header
         of PATH messages forwarded by PRVT-RSVP set source as the
         local outgoing interface IP address, and destination as
         the next hop router IP address."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 26 }

  prvtRsvpProductUseNotify OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate that PRVT-RSVP should attempt to insert
         a Notify Request object in all Path requests that is sends
         as ingress and all Resv requests that it sends as egress.
         The precise behavior is modified by a user exit called by
         the RSVP code.

         This field is not used unless the mplsTunnelUpNotRecip or
         mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 27 }

  prvtRsvpProductNotifyRRDecay OBJECT-TYPE
      SYNTAX      Integer32 (0..100)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The percentage increase in the rapid retransmission
         interval for each consecutive unacknowledged RSVP Notify
         message.  A value of 0 indicates a constant retransmission
         rate."
      DEFVAL { 100 }
     ::= { prvtRsvpProductEntry 28 }

  prvtRsvpProductNotifyRRInterval OBJECT-TYPE
      SYNTAX      Integer32 (1000..2147483647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The interval in milliseconds before a Notify message is
         first resent if no acknowledgement is received."
      DEFVAL { 2000 }
     ::= { prvtRsvpProductEntry 29 }

  prvtRsvpProductNotifyRRLimit OBJECT-TYPE
      SYNTAX      Integer32 (1..2147483647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The maximum number of times a Notify message is resent if
         no acknowledgement is received."
      DEFVAL { 2 }
     ::= { prvtRsvpProductEntry 30 }

  prvtRsvpProductAllowIPEncap OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate that PRVT-RSVP should support the use of
         IP encapsulation of RSVP packets, which are required for
         out-of-band signaling.  If set, then PRVT-RSVP will accept
         incoming RSVP packets that are IP encapsulated, and will
         IP encapsulate outgoing packets whenever the IP routing
         stub indicates that it is required for a particular route."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 31 }

  prvtRsvpProductProtocolExtensions OBJECT-TYPE
      SYNTAX      BITS { bypassFastReroute(0),
                         detourFastReroute(1),
                         noResAffOnInIf(2)
                       }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies which extensions to the standard RSVP-TE protocol
         are enabled.  For fully standards-compliant behavior, set
         this parameter to zero (no bits set).  To enable specific
         non-standard protocol extensions, set this parameter to the
         bitwise OR of whichever of the following behaviors you wish
         to enable.

         - bypassFastReroute: Enable support for facility fast reroute
         protection of LSPs (bypass LSP protection).  This flag is
         deprecated in favour of the
         prvtRsvpProductFrrFacAdminStatus field which can be
         modified while RSVP is admin up, however either field can be
         used.  When this flag is set RSVP automatically sets the
         prvtRsvpProductFrrFacAdminStatus.

         - detourFastReroute: Enable support for one-to-one fast
         reroute protection of LSPs (detour LSP protection).

         -  noResAffOnInIf: Disable resource affinity checking on
         incoming interfaces for LSPs.  If this flag is set, RSVP
         will accept Path messages which use invalid resource
         affinities for the incoming interface used by the LSP."

      DEFVAL { { } }
     ::= { prvtRsvpProductEntry 32 }

  prvtRsvpProductPSRFlags OBJECT-TYPE
      SYNTAX      BITS { pathErrPSRSet(0),
                         pathErrPSRNotSet(1),
                         ldbCommonRcvd(2),
                         ldbPreempted(3),
                         routingError(4),
                         invalidPathMsg(5),
                         sessionExpired(6),
                         unableToRepairRoute(7),
                         unableToRepairIf(8),
                         reachedRetryLimit(9),
                         unableToRefresh(10),
                         resvErrTurnaround(11),
                         incomingIfDown(12),
                         outgoingIfDown(13)
                       }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "This field is used by PRVT-RSVP to determine whether it
         should set the Path State Removed flag on a PathErr (and
         therefore remove corresponding state and generate a
         PathTear).  Each bit of this flags field corresponds to a
         situation where PRVT-RSVP may generate a PathErr.  Setting a
         particular bit will result in PRVT-RSVP removing state,
         setting the Path State Removed flag and generating a
         PathTear in that corresponding situation.  The possible
         bit values are

         - pathErrPSRSet: PRVT-RSVP has received a PathErr message
         with the Path State Removed flag set.

         - pathErrPSRNotSet: PRVT-RSVP has received a PathErr message
         with the Path State Removed flag unset.

         - ldbCommonRcvd: PRVT-RSVP has received a negative response
         to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC
         message.

         - ldbPreempted: PRVT-RSVP has received a Preemption message
         from Label Manager.

         - routingError: PRVT-RSVP has received a Negative response
         to an ATG_IPR_QUERY_ROUTE message.

         - invalidPathMsg: PRVT-RSVP has received an invalid Path
         message.

         - sessionExpired:  A session in PRVT-RSVP has expired.

         - unableToRepairRoute:  A route has been removed and
         PRVT-RSVP is unable to start local repair.

         - unableToRepairIf:  An interface has been removed and
         PRVT-RSVP is unable start local repair.

         - reachedRetryLimit: An initial Path Message has reached
         its retry limit.

         - unableToRefresh: PRVT-RSVP has been unable to refresh an
         LSP.

         - resvErrTurnaround: PRVT-RSVP has received a ResvErr at the
         Egress node containing a REROUTING object and this is to
         be turned round into a PathErr.

         - incomingIfDown: The incoming MPLS data interface for
         an LSP has been deactivated.

         - outgoingIfDown: The outgoing MPLS data interface for
         an LSP has been deactivated."

      DEFVAL { {} }
     ::= { prvtRsvpProductEntry 33 }

  prvtRsvpProductInitPathRRDecay OBJECT-TYPE
      SYNTAX      Integer32 (0..100)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The percentage increase in the rapid
         retransmission interval for each consecutive
         unacknowledged RSVP Initial Path message.  A value of 0
         indicates a constant retransmission rate.

         A Path message is treated as an initial Path if it is the
         Path message which creates the LSP or a Path refresh
         message which requires re-routing."
      DEFVAL { 100 }
     ::= { prvtRsvpProductEntry 34 }

  prvtRsvpProductInitPathRRInterval OBJECT-TYPE
      SYNTAX      Integer32  (1000..2147483647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The rapid retransmission interval in milliseconds before
         an Initial Path message is first resent if no
         acknowledgement is received.

         A Path message is treated as an initial Path if it is the
         Path message which creates the LSP or a Path refresh
         message which requires re-routing."
      DEFVAL { 2000 }
     ::= { prvtRsvpProductEntry 35 }

  prvtRsvpProductInitPathRRLimit OBJECT-TYPE
      SYNTAX      Integer32 (1..2147483647)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The maximum number of times an Initial Path message is
         resent if no acknowledgement is received.

         A Path message is treated as an initial Path if it is the
         Path message which creates the LSP or a Path refresh
         message which requires re-routing."
      DEFVAL { 2 }
     ::= { prvtRsvpProductEntry 36 }

  prvtRsvpProductEnableUni OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
          "A flag to indicate whether the local node supports UNI
           signaling messages."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 37 }

  prvtRsvpProductRestartCapable OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
          "A flag to indicate whether the local node should advertise
           itself as restart capable.  This should be set to true
           if fault-tolerance is enabled in PRVT-MPLS or if the node
           supports recovery procedures."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 38 }

  prvtRsvpProductRestartTime OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The time in milliseconds that the local node takes to
         restart RSVP-TE and the communication channel used for
         RSVP communication.  This is advertised to neighbors in
         the Restart_Cap object in Hello messages.

         The value chosen should be large enough for RSVP to be
         terminated and restarted.  If fault-tolerance is enabled
         in PRVT-MPLS, then sufficient time should be allowed for
         RSVP to fail over, which should include the time taken for
         the audit phase to complete.

         A value of 0xFFFFFFFF may be configured to imply an infinite
         restart time.

         Only used if prvtRsvpProductRestartCapable is set to true.

         Note that the maximum real time value that can be set is
         0x7FFFFFFF.  If a value is requested greater than
         0x7FFFFFFF and less than 0xFFFFFFFF the request will be
         rejected."

      DEFVAL { 10000 }
     ::= { prvtRsvpProductEntry 39 }

  prvtRsvpProductRecoveryTime OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The period of time in milliseconds that the local node
         would like neighbors to take to resyncronize RSVP and
         MPLS forwarding information after the re-establishment of
         Hello connectivity.  This is advertised to neighbors in
         the Restart_Cap object in Hello messages.

         A value of zero indicates that the node does not support
         resynchronization following failure of the local node.

         A value of 0xFFFFFFFF indicates an infinite recovery time.

         Note that if fault-tolerance is not enabled in PRVT-MPLS and
         the node is acting as an ingress for tunnels, then any
         ingress tunnels that need to be recovered should be
         configured during this recovery period.  These tunnels
         should be configured in TE-MIB with the admin_status set
         to UP, otherwise they will be lost from the switch
         controller.

         Only used if prvtRsvpProductRestartCapable is set to true.

         Note that the maximum real time value that can be set is
         0x7FFFFFFF.  If a value is requested greater than
         0x7FFFFFFF and less than 0xFFFFFFFF the request will be
         rejected."

      DEFVAL { 10000 }
     ::= { prvtRsvpProductEntry 40 }

  prvtRsvpProductMinPeerRestart OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The mininum period of time in milliseconds that RSVP
         should wait for a restart capable neighbor to regain
         Hello connectivity before invoking procedures related to
         communication loss.

         RSVP will wait for the maximum of this time and the
         restart_time advertised in the RESTART_CAP object in Hello
         messages from the neighbor."
      DEFVAL { 0 }
     ::= { prvtRsvpProductEntry 41 }

  prvtRsvpProductGracefulDelTimeout OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "The time in milliseconds that PRVT-MPLS will wait for
         graceful deletion to complete before the forced deletion
         procedure is used instead."
      DEFVAL { 30000 }
     ::= { prvtRsvpProductEntry 42 }

  prvtRsvpProductEgressDelBehavior OBJECT-TYPE
      SYNTAX      INTEGER { delWithPathErr(1),
                            delWithResvD(2)
                          }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies the action that an egress node should take in
         the graceful deletion procedure on receipt of a Path
         message containing an Admin Status object with the D
         and R bits set.  The possible values are:-

         - delWithPathErr:  Send a PathErr message with the
         Path_State_removed flag set.

         - delWithResvD:  Send a Resv message containing an Admin
         Status object with the D bit set."
      DEFVAL { delWithPathErr }
     ::= { prvtRsvpProductEntry 43 }

  prvtRsvpProductEnabUniConnSplicing OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate whether UNI-N nodes should allow the
         splicing of UNI connections with proprietary ON
         connections."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 44 }

  prvtRsvpProductFastRerouteCaps OBJECT-TYPE
      SYNTAX      BITS { fastReroutePLR(0),
                         fastRerouteMP(1),
                         fastRerouteDetourRestart(2)
                       }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies what fast reroute capabilities are enabled
         on this node.  This field is only valid if the fast
         reroute extension is enabled in the
         prvtRsvpProductProtocolExtensions field above.

         -  PLR: Node provides fast reroute point of local repair
         capability.

         -  MP: Node provides fast reroute merge point capability.

         -  DetourRestart: Node implements some protocol extensions
         to recover detour fast reroute LSPs after a node restart
         or an adjacent node restart.  This flag is only valid if
         detourFastReroute flag is set in the
         prvtRsvpProductProtocolExtensions field above.

         Note that a node can still perform some FRR processing
         even if the PLR and MP flags are clear (at a detour transit
         for instance)."
      DEFVAL { { } }
     ::= { prvtRsvpProductEntry 45 }

  prvtRsvpProductFastRroutBkpRtryInt OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "When this node is a PLR, this field specifies the period
         that the node should wait before retrying the setup of a
         backup LSP which failed last time because no route was
         available.  In the case that a backup LSP is set up but an
         error is received from upstream, setup will be attempted
         again immediately.
         This field is only valid if this node is defined as PLR
         capable in the _prvtRsvpProductFastRerouteCapabilities_
         field above."
      DEFVAL { 30000 }
     ::= { prvtRsvpProductEntry 46 }

  prvtRsvpProductErrorActionFlags OBJECT-TYPE
      SYNTAX      BITS { eafTearStateOnLSIErr(0)
                       }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "This field is used by PRVT-RSVP to determine whether it
         should take any special action following certain types of
         local errors.  Each bit of this flags field corresponds to
         an error and a corresponding action.

         When one of these errors occurs, the relevant bit flag is
         checked - if set, the specified action is taken; if not
         set, the normal action is taken according the RSVP
         protocol.  The possible bit values are the following.

         - eafTearStateOnLSIErr:  When PRVT-RSVP receives a negative
           response to an ATG_LDB_CONNECT_LSP_XC message on a UNI
           node, the Path state is torn down."

      DEFVAL { {} }
     ::= { prvtRsvpProductEntry 47 }

  prvtRsvpProductEnableNni OBJECT-TYPE
      SYNTAX      INTEGER {
                      disabled(1),
                      enabled(2),
                      disabling(3)
                  }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "A flag to indicate whether the local node supports NNI
         signaling messages."
      DEFVAL { disabled }
     ::= { prvtRsvpProductEntry 48 }

  prvtRsvpProductBehaviorFlags OBJECT-TYPE
      SYNTAX      BITS { enableTTLMatch(0)
                       }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies some detailed aspects of the behavior of
         PRVT-RSVP.  This field may be changed while _admin_status_
         is up.

         - enableTTLMatch: Whether to discard received RSVP
         packets sent with the Router Alert option if the IP and
         RSVP TTL values do not match.  In certain circumstances
         TTL comparison can identify RSVP service breaks, and allow
         the discarding of packets that would otherwise disrupt
         installed LSPs.

         This option has no effect for Out Of Band operation.

         This option should be left disabled for LSP hierarchy
         operation (LSPs set up over existing LSPs) and for
         Facility Fast Reroute (which sets up backup LSPs over
         existing bypass LSPs)."

      DEFVAL { {} }
     ::= { prvtRsvpProductEntry 49 }

  prvtRsvpProductLabelSetStyle OBJECT-TYPE
      SYNTAX      INTEGER {
                      excludeLabelHeader(1),
                      includeLabelHeader(2)
                  }
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies the style of LABEL_SET object that should be
         used.  RFCs 3741 and 3743 are unclear whether the
         LABEL_SET object should include LABEL headers.  The
         correct interpretation is that the header should not be
         present, but there are implementations that include the
         LABEL header, so this option is included for compatibility
         with these implementations.

         - excludeLabelHeader:  The LABEL_SET object contains
           concatenated LABEL values without the object headers.

         - includeLabelHeader:  The LABEL_SET object contains
           concatenated LABEL objects with the object headers."
      DEFVAL { excludeLabelHeader }
     ::= { prvtRsvpProductEntry 50 }

  prvtRsvpProductLabelSetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                      excludeLabelHeader(1),
                      includeLabelHeader(2),
                      goingToExclude(3),
                      goingToInclude(4)
                  }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
       "The current operational state of Label Set style.
         - excludeLabelHeader:  The LABEL_SET object contains
           concatenated LABEL values without the object headers.

         - includeLabelHeader:  The LABEL_SET object contains
           concatenated LABEL objects with the object headers.

         - goingToExclude:  The Label Set Style is being changed
           from includeLabelHeader to excludeLabelHeader.

         - goingToInclude:  The Label Set Style is being changed
           from excludeLabelHeader to includeLabelHeader."
     ::= { prvtRsvpProductEntry 51 }

  prvtRsvpProductLabelSetTrapEnable OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "This object is used to enable traps for the Label
         Set style  oper_status object."
      DEFVAL { false }
     ::= { prvtRsvpProductEntry 52 }

  prvtRsvpProductLabelSetChngAct OBJECT-TYPE
      SYNTAX      Integer32
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies the action to take when the value of
         prvtRsvpProductLabelSetStyle is changed.

         - leaveLSPs:  All nodes should suppress refreshes and
         switch to the new format while refreshes are suppressed.

         - tearLSPs:   Any LSPs using label sets will be deleted
         before switching all nodes to the new format, and any new
         LSPs using label sets will be dropped/rejected until the
         switch is complete."
      DEFVAL { 1 }
     ::= { prvtRsvpProductEntry 53 }

  prvtRsvpProductExtPrtAdminStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpAdminStatus
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
       "The desired operational state of support for the extended
        PROTECTION object defined in
        draft-lang-ccamp-gmpls-recovery-e2e-signaling."
      DEFVAL { down }
     ::= { prvtRsvpProductEntry 54 }

  prvtRsvpProductUniIncSonetProfile OBJECT-TYPE
      SYNTAX      Unsigned32 (0..1)
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies whether Sonet Profile is included on messages
         to or from a UNI-C node."
      DEFVAL { 0 }
     ::= { prvtRsvpProductEntry 55 }

  prvtRsvpProductFrrFacAdminStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpAdminStatus
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Specifies whether backup LSPs can be put in place for LSPs
         requesting FRR using the facility method.

         Setting this to UP means that LSPs that request FRR using
         the facility method can have protection at this node.
         Existing LSPs that request FRR facility protection will have
         protection put in place when the next Path refresh is
         received.

         Setting this to DOWN means that LSPs that request FRR using
         the facility method will not be protected at this node.
         Existing LSPs that have FRR facility protection will lose
         that protection, and if the LSP had been rerouted to use the
         backup LSP then the protected LSP will be lost.

         This field replaces the bypassFastReroute flag on the protocol
         extensions field in this MIB (although the bypassFastReroute flag
         is still supported for backwards compatibility). It can be
         modified while RSVP is oper_status UP or DOWN.  When this field
         is changed the bypassFastReroute flag is automatically modified
         to mirror the change."

      DEFVAL { down }
     ::= { prvtRsvpProductEntry 56 }

  prvtRsvpProductFrrFacOperStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpOperStatus
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The current operational status for FRR Facility support.
         When this is UP backup LSPs will be put in place, when this
         is down backup LSPs will not be put in place and there will
         be no LSPs that have backup LSPs."
     ::= { prvtRsvpProductEntry 57 }

  prvtRsvpProductIpv6AdminStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpAdminStatus
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION
        "Specifies whether the local node supports IPv6 LSPs.

         Setting this to UP means that this node supports IPv6 LSPs
         being set up to, from and through this node.

         Setting this to DOWN means that IPv6 LSPs are NOT supported by
         this node.  Existing IPv6 LSPs for which this node is the
         ingress, egress or transit are torn down.

         This field can be modified while RSVP is oper_status UP or
         DOWN.

         The value of this field MUST match the value of the
         dcMplsTeMibRsvpIpv6AdminStatus field in the
         prvtMplsTeMibEntityTable."

      DEFVAL { down }
     ::= { prvtRsvpProductEntry 58 }

  prvtRsvpProductIpv6OperStatus OBJECT-TYPE
      SYNTAX      PrvtRsvpOperStatus
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
        "The current operational status for IPv6 support.  When
         this is UP IPv6 LSPs can be set up to from or through this
         node.  When this is down there will be no active IPv6 LSPs."
     ::= { prvtRsvpProductEntry 59 }

  prvtRsvpProductAPIIpv6Address OBJECT-TYPE
      SYNTAX      InetAddressIPv6
      MAX-ACCESS  read-create
      STATUS      current
      DESCRIPTION
        "Management assigned IPv6 address used to identify the
         (internal) LRAPI interface between RSVP and TE-MIB
         components.

         The configured API IPv6 address MUST not be a real address
         in the network.  It is recommended that this is set to a
         non-zero reserved address value.  This MUST be an address
         with global scope.

         If multi-stack support is set to PHOP, this address must
         be unique for each RSVP stack in the node.

         The same address(es) can be used on all nodes in the
         network."
     ::= { prvtRsvpProductEntry 60 }

-- Diagnostics table
-- This table is used to control diagnostic requests and responses.

  prvtRsvpDiagnosticTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF PrvtRsvpDiagnosticEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The table of sessions that are being diagnosed."
     ::= { prvtRsvpObjects 2 }

  prvtRsvpDiagnosticEntry OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagnosticEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Each entry represents a session that is being diagnosed."
      INDEX { prvtRsvpDiagProductIndex,
              prvtRsvpDiagRequestIndex }
     ::= { prvtRsvpDiagnosticTable 1 }

  PrvtRsvpDiagnosticEntry ::= SEQUENCE {
          prvtRsvpDiagProductIndex               PrvtRsvpIndex,
          prvtRsvpDiagRequestIndex               PrvtRsvpDiagReqIndex,
          prvtRsvpDiagReqsInProgress             Unsigned32,
          prvtRsvpDiagSessionEndPoint            IpAddress,
          prvtRsvpDiagSessionTunnelId            Unsigned32,
          prvtRsvpDiagSessionExtTunnelId         Unsigned32,
          prvtRsvpDiagLastHop                    IpAddress,
          prvtRsvpDiagSender                     IpAddress,
          prvtRsvpDiagMaxHops                    Integer32,
          prvtRsvpDiagHopByHopReply              TruthValue
          -- prvtRsvpDiagRowStatus                  RowStatus
      }

  prvtRsvpDiagProductIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpIndex
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of the PRVT-RSVP product that is handling this query."
     ::= { prvtRsvpDiagnosticEntry 1 }

  prvtRsvpDiagRequestIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagReqIndex
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of this prvtRsvpDiagnosticEntry.  This corresponds to a
           particular session being diagnosed and is an arbitrary value,
           defined on row creation."
     ::= { prvtRsvpDiagnosticEntry 2 }

  prvtRsvpDiagReqsInProgress OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The number of outstanding diagnostic requests relating to this
           session."
     ::= { prvtRsvpDiagnosticEntry 3 }

  prvtRsvpDiagSessionEndPoint OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
           session object."
     ::= { prvtRsvpDiagnosticEntry 4 }

  prvtRsvpDiagSessionTunnelId OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The tunnel ID, from the LSP_TUNNEL_IPv4 session object."
     ::= { prvtRsvpDiagnosticEntry 5 }

  prvtRsvpDiagSessionExtTunnelId OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object."
     ::= { prvtRsvpDiagnosticEntry 6 }

  prvtRsvpDiagLastHop OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address of the last hop to be queried. This is the address
           to which the DREQ message is first sent."
     ::= { prvtRsvpDiagnosticEntry 7 }

  prvtRsvpDiagSender OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address of the sender for the specified session."
     ::= { prvtRsvpDiagnosticEntry 8 }

  prvtRsvpDiagMaxHops OBJECT-TYPE
      SYNTAX      Integer32 (0..255)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The maximum number of hops to diagnose."
     ::= { prvtRsvpDiagnosticEntry 9 }

  prvtRsvpDiagHopByHopReply OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A flag to indicate that DREPs should be returned hop-by-
          hop using the reverse of the path taken by the DREQ."
     ::= { prvtRsvpDiagnosticEntry 10 }

  -- prvtRsvpDiagRowStatus OBJECT-TYPE
  --     SYNTAX      RowStatus
  --     MAX-ACCESS  read-only
  --     STATUS      current
  --     DESCRIPTION
  --      "Used to create or delete a PRVT-RSVP Diagnostic Table entry."
  --    ::= { prvtRsvpDiagnosticEntry 11 }


-- Diagnostic node table
-- This table is used to present diagnostic information about nodes in a session.

  prvtRsvpDiagNodeTable OBJECT-TYPE
      SYNTAX      SEQUENCE OF PrvtRsvpDiagNodeEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The table of nodes within a session that is being diagnosed.

           External management can extract information
           from this table, but cannot modify information in it."

     ::= { prvtRsvpObjects 3 }

  prvtRsvpDiagNodeEntry OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagNodeEntry
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "Each entry represents a node within a session that is being diagnosed."
      INDEX { prvtRsvpDiagNodeProductIndex,
              prvtRsvpDiagNodeRequestIndex,
              prvtRsvpDiagNodeIndex }
     ::= { prvtRsvpDiagNodeTable 1 }

  PrvtRsvpDiagNodeEntry ::= SEQUENCE {
          prvtRsvpDiagNodeProductIndex           PrvtRsvpIndex,
          prvtRsvpDiagNodeRequestIndex           PrvtRsvpDiagReqIndex,
          prvtRsvpDiagNodeIndex                  PrvtRsvpDiagNodeIndexType,
          prvtRsvpDiagNodeType                   PrvtRsvpDiagNodeTypeVal,
          -- Below is the information that is returned in a DIAG_RESPONSE
          prvtRsvpDiagNodeDreqArrivalTime        Unsigned32,
          prvtRsvpDiagNodeIncomingIfAddr         IpAddress,
          prvtRsvpDiagNodeOutgoingIfAddr         IpAddress,
          prvtRsvpDiagNodePrevHopAddr            IpAddress,
          prvtRsvpDiagNodeDTTL                   Integer32,
          prvtRsvpDiagNodeMFlag                  TruthValue,
          prvtRsvpDiagNodeRErr                   Integer32,
          prvtRsvpDiagNodeKValue                 Integer32,
          prvtRsvpDiagNodeTimerValue             Integer32,
          -- Below are the objects that can be appended to a DIAG_RESPONSE
          prvtRsvpDiagRsvpHopAddr                IpAddress,
          prvtRsvpDiagRsvpHopLIH                 Unsigned32,
          prvtRsvpDiagSenderTpltAddress          IpAddress,
          prvtRsvpDiagSenderTpltLSPId            Integer32,
          -- Info from SENDER_TSPEC and ADSPEC is covered by FLOWSPEC
          prvtRsvpDiagFlowSpecCLBktRate          Unsigned32,
          prvtRsvpDiagFlowSpecCLBktDep           Unsigned32,
          prvtRsvpDiagFlowSpecCLPkDataRate       Unsigned32,
          prvtRsvpDiagFlowSpecCLMinPolUnit       Unsigned32,
          prvtRsvpDiagFlowSpecCLMaxPktSize       Unsigned32,
          prvtRsvpDiagFlowSpecGQBktRate          Unsigned32,
          prvtRsvpDiagFlowSpecGQBktDep           Unsigned32,
          prvtRsvpDiagFlowSpecGQPkDataRate       Unsigned32,
          prvtRsvpDiagFlowSpecGQMinPolUnit       Unsigned32,
          prvtRsvpDiagFlowSpecGQMaxPktSize       Unsigned32,
          prvtRsvpDiagFlowSpecGQRate             Unsigned32,
          prvtRsvpDiagFlowSpecGQSlack            Unsigned32,
          prvtRsvpDiagFlowSpecCoSCoS             Integer32,
          prvtRsvpDiagFlowSpecCoSMTU             Integer32,
          prvtRsvpDiagFilterSpecAddress          IpAddress,
          prvtRsvpDiagFilterSpecLSPId            Integer32,
          prvtRsvpDiagConfirmRcvAddr             IpAddress,
          prvtRsvpDiagStyle                      Unsigned32
          -- The SCOPE object is omitted
      }

  prvtRsvpDiagNodeProductIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpIndex
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of the PRVT-RSVP product that is handling this query."
     ::= { prvtRsvpDiagNodeEntry 1 }

  prvtRsvpDiagNodeRequestIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagReqIndex
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of the corresponding request in prvtRsvpDiagnosticTable."
     ::= { prvtRsvpDiagNodeEntry 2 }

  prvtRsvpDiagNodeIndex OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagNodeIndexType
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
          "The index of this prvtRsvpDiagNodeEntry. This is equivalent to the
           hop number, with 1 being the ingress."
     ::= { prvtRsvpDiagNodeEntry 3 }

  prvtRsvpDiagNodeType OBJECT-TYPE
      SYNTAX      PrvtRsvpDiagNodeTypeVal
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The type of the node: ingress, transit, egress or missing. Missing
           indicates that no diagnostic response has been received for this
           node, and this entry may in fact represent more than one node."
     ::= { prvtRsvpDiagNodeEntry 4 }

  prvtRsvpDiagNodeDreqArrivalTime OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The arrival time of the DREQ at the node, specified as a 32-bit
           NTP timestamp."
     ::= { prvtRsvpDiagNodeEntry 5 }

  prvtRsvpDiagNodeIncomingIfAddr OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address of the interface on which message from the sender
           are expected to arrive at this node, or 0 if unknown."
     ::= { prvtRsvpDiagNodeEntry 6 }

  prvtRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address of the interface through which the DREQ arrived
           and to which messages flow from the given sender for the
           specified session address, or 0 if unknown."
     ::= { prvtRsvpDiagNodeEntry 7 }

  prvtRsvpDiagNodePrevHopAddr OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The IP address from which this node receives RSVP PATH messages
           for this source, or 0 if unknown. This is also the address to
           which the DREQ was forwarded."
     ::= { prvtRsvpDiagNodeEntry 8 }

  prvtRsvpDiagNodeDTTL OBJECT-TYPE
      SYNTAX      Integer32 (0..255)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The number of IP hops traversed by the DREQ between the downstream
           RSVP node and this node."
     ::= { prvtRsvpDiagNodeEntry 9 }

  prvtRsvpDiagNodeMFlag OBJECT-TYPE
      SYNTAX      TruthValue
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "A flag that indicates whether the reservation described by the
           response objects is merged with reservations from other downstream
           interfaces before being forwarded upstream."
     ::= { prvtRsvpDiagNodeEntry 10 }

  prvtRsvpDiagNodeRErr OBJECT-TYPE
      SYNTAX      Integer32 (0..7)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The error conditions at this node.
           Bit 3 indicates ROUTE object too big;
           Bit 2 indicates packet too big;
           Bit 1 indicates no PATH state.
           Bit 1 is the least significant bit."
     ::= { prvtRsvpDiagNodeEntry 11 }

  prvtRsvpDiagNodeKValue OBJECT-TYPE
      SYNTAX      Integer32 (0..15)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The refresh timer multiple."
     ::= { prvtRsvpDiagNodeEntry 12 }

  prvtRsvpDiagNodeTimerValue OBJECT-TYPE
      SYNTAX      Integer32 (0..65535)
      UNITS       "seconds"
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The local refresh timer value in seconds."
     ::= { prvtRsvpDiagNodeEntry 13 }

  prvtRsvpDiagRsvpHopAddr OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The hop address from the session's RSVP_HOP object."
     ::= { prvtRsvpDiagNodeEntry 14 }

  prvtRsvpDiagRsvpHopLIH OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The LIH from the session's RSVP_HOP object."
     ::= { prvtRsvpDiagNodeEntry 15 }

  prvtRsvpDiagSenderTpltAddress OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The address from the session's SENDER_TEMPLATE object."
     ::= { prvtRsvpDiagNodeEntry 16 }

  prvtRsvpDiagSenderTpltLSPId OBJECT-TYPE
      SYNTAX      Integer32 (0..65535)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The LSP ID from the session's SENDER_TEMPLATE object."
     ::= { prvtRsvpDiagNodeEntry 17 }

  prvtRsvpDiagFlowSpecCLBktRate OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv controlled load token bucket rate in bytes per second,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 18 }

  prvtRsvpDiagFlowSpecCLBktDep OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv controlled load token bucket depth in bytes,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 19 }

  prvtRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv controlled load peak data rate in bytes per second,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 20 }

  prvtRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv controlled load minimum policed unit
           from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 21 }

  prvtRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv controlled load maximum packet size
           from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 22 }

  prvtRsvpDiagFlowSpecGQBktRate OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS token bucket rate in bytes per second,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 23 }

  prvtRsvpDiagFlowSpecGQBktDep OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS token bucket depth in bytes,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 24 }

  prvtRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS peak data rate in bytes per second,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 25 }

  prvtRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS minimum policed unit
           from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 26 }

  prvtRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS maximum packet size
           from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 27 }

  prvtRsvpDiagFlowSpecGQRate OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS rate in bytes per second,
           from the session's FLOWSPEC object.
           This value is rounded to the nearest integer."
     ::= { prvtRsvpDiagNodeEntry 28 }

  prvtRsvpDiagFlowSpecGQSlack OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "Int-serv guaranteed QoS slack in microseconds,
           from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 29 }

  prvtRsvpDiagFlowSpecCoSCoS OBJECT-TYPE
      SYNTAX      Integer32 (0..255)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "CoS class of service from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 30 }

  prvtRsvpDiagFlowSpecCoSMTU OBJECT-TYPE
      SYNTAX      Integer32 (0..65535)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "CoS maximum packet size from the session's FLOWSPEC object."
     ::= { prvtRsvpDiagNodeEntry 31 }

  prvtRsvpDiagFilterSpecAddress OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The address from the session's FILTER_SPEC object."
     ::= { prvtRsvpDiagNodeEntry 32 }

  prvtRsvpDiagFilterSpecLSPId OBJECT-TYPE
      SYNTAX      Integer32 (0..65535)
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The LSP ID from the session's FILTER_SPEC object."
     ::= { prvtRsvpDiagNodeEntry 33 }

  prvtRsvpDiagConfirmRcvAddr OBJECT-TYPE
      SYNTAX      IpAddress
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The address from the session's CONFIRM object."
     ::= { prvtRsvpDiagNodeEntry 34 }

  prvtRsvpDiagStyle OBJECT-TYPE
      SYNTAX      Unsigned32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "The style word from the session's STYLE object."
     ::= { prvtRsvpDiagNodeEntry 35 }

-- Module compliance.

-- conformance
prvtRsvpConformance  OBJECT IDENTIFIER ::= {prvtRsvp 2 }

prvtRsvpCompliances OBJECT IDENTIFIER ::= { prvtRsvpConformance 1 }
prvtRsvpGroups      OBJECT IDENTIFIER ::= { prvtRsvpConformance 2 }

prvtRsvpCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for the PRVT-RSVP product MIB."
    MODULE

    GROUP prvtRsvpProductGroup
    DESCRIPTION
        "Product Table Objects."

    GROUP prvtRsvpDiagGroup
    DESCRIPTION
        "Diagnostic Table Objects."

    GROUP prvtRsvpDiagNodeGroup
    DESCRIPTION
        "Diag Node Table Objects."

    ::= { prvtRsvpCompliances 1 }

prvtRsvpProductGroup OBJECT-GROUP
   OBJECTS {
      prvtRsvpProductASNumber,
      prvtRsvpProductSenderTTL,
      prvtRsvpProductMinTimerPeriod,
      prvtRsvpProductAPIIfIndex,
      prvtRsvpProductAPIAddress,
      prvtRsvpProductAPIRefreshInterval,
      prvtRsvpProductLocalRepairDelay,
      prvtRsvpProductRefreshInterval,
      prvtRsvpProductRefreshMultiple,
      prvtRsvpProductRfrshSlewDenom,
      prvtRsvpProductRfrshSlewNumerator,
      prvtRsvpProductBlockadeMultiple,
      prvtRsvpProductSocketBufPoolSize,
      prvtRsvpProductSwitchBufPoolSize,
      prvtRsvpProductTeMibBufPoolSize,
      prvtRsvpProductRoutingBufPoolSize,
      prvtRsvpProductLSPSetupPriority,
      prvtRsvpProductLSPHoldingPriority,
      prvtRsvpProductAdminStatus,
      prvtRsvpProductOperStatus,
      prvtRsvpProductRowStatus,
      prvtRsvpProductLsrIndex,
      prvtRsvpProductTeMibIndex,
      prvtRsvpProductMultiStackSupport,
      prvtRsvpProductUseHopByHop,
      prvtRsvpProductUseNotify,
      prvtRsvpProductNotifyRRDecay,
      prvtRsvpProductNotifyRRInterval,
      prvtRsvpProductNotifyRRLimit,
      prvtRsvpProductAllowIPEncap,
      prvtRsvpProductProtocolExtensions,
      prvtRsvpProductPSRFlags,
      prvtRsvpProductInitPathRRDecay,
      prvtRsvpProductInitPathRRInterval,
      prvtRsvpProductInitPathRRLimit,
      prvtRsvpProductEnableUni,
      prvtRsvpProductRestartCapable,
      prvtRsvpProductRestartTime,
      prvtRsvpProductRecoveryTime,
      prvtRsvpProductMinPeerRestart,
      prvtRsvpProductGracefulDelTimeout,
      prvtRsvpProductEgressDelBehavior,
      prvtRsvpProductEnabUniConnSplicing,
      prvtRsvpProductFastRerouteCaps,
      prvtRsvpProductFastRroutBkpRtryInt,
      prvtRsvpProductErrorActionFlags,
      prvtRsvpProductEnableNni,
      prvtRsvpProductBehaviorFlags,
      prvtRsvpProductLabelSetStyle,
      prvtRsvpProductLabelSetOperStatus,
      prvtRsvpProductLabelSetTrapEnable,
      prvtRsvpProductLabelSetChngAct,
      prvtRsvpProductExtPrtAdminStatus,
      prvtRsvpProductUniIncSonetProfile,
      prvtRsvpProductFrrFacAdminStatus,
      prvtRsvpProductFrrFacOperStatus,
      prvtRsvpProductIpv6AdminStatus,
      prvtRsvpProductIpv6OperStatus,
      prvtRsvpProductAPIIpv6Address
    }
    STATUS  current
    DESCRIPTION
           "Product Table Objects."
    ::= { prvtRsvpGroups 2 }

prvtRsvpDiagGroup OBJECT-GROUP
   OBJECTS {
      prvtRsvpDiagReqsInProgress,
      prvtRsvpDiagSessionEndPoint,
      prvtRsvpDiagSessionTunnelId,
      prvtRsvpDiagSessionExtTunnelId,
      prvtRsvpDiagLastHop,
      prvtRsvpDiagSender,
      prvtRsvpDiagMaxHops,
      prvtRsvpDiagHopByHopReply
      -- prvtRsvpDiagRowStatus
    }
    STATUS  current
    DESCRIPTION
           "Diagnostic Table Objects."
    ::= { prvtRsvpGroups 3 }

prvtRsvpDiagNodeGroup OBJECT-GROUP
   OBJECTS {
      prvtRsvpDiagNodeType,
      prvtRsvpDiagNodeDreqArrivalTime,
      prvtRsvpDiagNodeIncomingIfAddr,
      prvtRsvpDiagNodeOutgoingIfAddr,
      prvtRsvpDiagNodePrevHopAddr,
      prvtRsvpDiagNodeDTTL,
      prvtRsvpDiagNodeMFlag,
      prvtRsvpDiagNodeRErr,
      prvtRsvpDiagNodeKValue,
      prvtRsvpDiagNodeTimerValue,
      prvtRsvpDiagRsvpHopAddr,
      prvtRsvpDiagRsvpHopLIH,
      prvtRsvpDiagSenderTpltLSPId,
      prvtRsvpDiagSenderTpltAddress,
      prvtRsvpDiagFlowSpecCLBktRate,
      prvtRsvpDiagFlowSpecCLBktDep,
      prvtRsvpDiagFlowSpecCLPkDataRate,
      prvtRsvpDiagFlowSpecCLMinPolUnit,
      prvtRsvpDiagFlowSpecCLMaxPktSize,
      prvtRsvpDiagFlowSpecGQBktRate,
      prvtRsvpDiagFlowSpecGQBktDep,
      prvtRsvpDiagFlowSpecGQPkDataRate,
      prvtRsvpDiagFlowSpecGQMinPolUnit,
      prvtRsvpDiagFlowSpecGQMaxPktSize,
      prvtRsvpDiagFlowSpecGQRate,
      prvtRsvpDiagFlowSpecGQSlack,
      prvtRsvpDiagFlowSpecCoSCoS,
      prvtRsvpDiagFlowSpecCoSMTU,
      prvtRsvpDiagFilterSpecAddress,
      prvtRsvpDiagFilterSpecLSPId,
      prvtRsvpDiagConfirmRcvAddr,
      prvtRsvpDiagStyle
    }
    STATUS  current
    DESCRIPTION
           "Diag Node Table Objects."
    ::= { prvtRsvpGroups 4 }

END

